Python tasks.flagcmd函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中tasks.flagcmd函数的典型用法代码示例。如果您正苦于以下问题：Python flagcmd函数的具体用法？Python flagcmd怎么用？Python flagcmd使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了flagcmd函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: test_default_cparam

 def test_default_cparam(self):
     '''Flagcmd: flag CPARAM data column'''
     flist = ["mode='clip' clipzeros=True datacolumn='CPARAM'"]
     flagcmd(vis=self.vis, inpmode='list', inpfile=flist,
             flagbackup=False)
     res = flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['flagged'], 11078, 'Should use CPARAM as the default column')

开发者ID:radio-astro，项目名称:casa，代码行数:7，代码来源:test_flagcmd.py

示例2: test_compatibility

 def test_compatibility(self):
     myinput = "observation='1' mode='manualflag'"
     filename = create_input(myinput)
     
     flagcmd(vis=self.vis, inpmode='list', inpfile=filename, action='apply', savepars=False,
             flagbackup=False)
     test_eq(flagdata(vis=self.vis, mode='summary'), 2882778, 28500)

开发者ID:radio-astro，项目名称:casa，代码行数:7，代码来源:test_flagcmd.py

示例3: test_clip_one_list

 def test_clip_one_list(self):
     '''Flagcmd: Flag one solution using one command in a list'''
     flist = ["mode='clip' clipminmax=[0,3] correlation='REAL_Sol1' datacolumn='CPARAM'"]
     flagcmd(vis=self.vis, inpmode='list', inpfile=flist)
     res = flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['flagged'], 309388)
     self.assertEqual(res['correlation']['Sol2']['flagged'], 0)

开发者ID:radio-astro，项目名称:casa，代码行数:7，代码来源:test_flagcmd.py

示例4: test_CAS4819

 def test_CAS4819(self):
     '''flagcmd: CAS-4819, Flag commands from three files'''
     self.setUp_ngc5921()
     # creat first input file
     myinput = "scan='1'\n"\
             "scan='2'\n"\
             "scan='3'"
     filename1 = 'list7a.txt'
     create_input1(myinput, filename1)
     
     # Create second input file
     myinput = "scan='5'\n"\
             "scan='6'\n"\
             "scan='7'"        
     filename2 = 'list7b.txt'
     create_input1(myinput, filename2)
     
      # Create third input file
     myinput = "scan='4' mode='clip' clipminmax=[0,4]" 
     filename3 = 'list7c.txt'
     create_input1(myinput, filename3)
    
     flagcmd(vis=self.vis, inpmode='list', inpfile=[filename1,filename2,filename3],
              flagbackup=False, action='apply')
     
     res = flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['scan']['1']['flagged'], 568134)
     self.assertEqual(res['scan']['2']['flagged'], 238140)
     self.assertEqual(res['scan']['3']['flagged'], 762048)
     self.assertEqual(res['scan']['4']['flagged'], 6696)
     self.assertEqual(res['scan']['5']['flagged'], 142884)
     self.assertEqual(res['scan']['6']['flagged'], 857304)
     self.assertEqual(res['scan']['7']['flagged'], 190512)
     self.assertEqual(res['total'],2854278)
     self.assertEqual(res['flagged'],2765718)

开发者ID:radio-astro，项目名称:casa，代码行数:35，代码来源:test_flagcmd.py

示例5: test_list_reason1

 def test_list_reason1(self):
     '''flagcmd: select by reason from two files'''
     self.setUp_ngc5921()
     # creat first input file
     myinput = "scan='1' spw='0:10~20' reason='NONE'\n"\
             "scan='2' reason='EVEN'\n"\
             "scan='3' reason='ODD'"
     filename1 = 'reasonfile1.txt'
     create_input1(myinput, filename1)
     
     # Create second input file
     myinput = "scan='5' reason='ODD'\n"\
             "scan='6' reason='EVEN'\n"\
             "scan='7' reason='ODD'"        
     filename2 = 'reasonfile2.txt'
     create_input1(myinput, filename2)
     
     # Apply flag cmds on ODD reason
     flagcmd(vis=self.vis, inpmode='list', inpfile=[filename1,filename2], reason='ODD',
              flagbackup=False, action='apply')
     
     res = flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['scan']['3']['flagged'], 762048)
     self.assertEqual(res['scan']['5']['flagged'], 142884)
     self.assertEqual(res['scan']['6']['flagged'], 0)
     self.assertEqual(res['scan']['7']['flagged'], 190512)
     self.assertEqual(res['flagged'], 762048+142884+190512)

开发者ID:radio-astro，项目名称:casa，代码行数:27，代码来源:test_flagcmd.py

示例6: test_cal_observation

 def test_cal_observation(self):
     '''Flagcmd: flag an observation from an old cal table format'''
     # Note: this cal table does not have an observation column. 
     # The column and sub-table should be added and the flagging
     # should happen after this.
     flagcmd(vis=self.vis, inpmode='list', inpfile=["observation='0'"], flagbackup=False)
     res=flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['flagged'],1248000)
     self.assertEqual(res['total'],1248000)

开发者ID:radio-astro，项目名称:casa，代码行数:9，代码来源:test_flagcmd.py

示例7: test_xml2

 def test_xml2(self):
     '''flagcmd: list xml file and save in outfile'''
     
     # The MS only contains clip and shadow commands
     
     # Apply the shadow command
     flagcmd(vis=self.vis, action='apply', reason='SHADOW', flagbackup=False)
     res = flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['flagged'], 240640)

开发者ID:radio-astro，项目名称:casa，代码行数:9，代码来源:test_flagcmd.py

示例8: test_manual_field_selection_for_bpass

 def test_manual_field_selection_for_bpass(self):
     """Flagcmd:: Manually flag a bpass-based CalTable using field selection"""
     
     flagcmd(vis=self.vis, inpmode='list', inpfile=["field='3C286_A'"], flagbackup=False)
     summary=flagdata(vis=self.vis, mode='summary')
     
     self.assertEqual(summary['field']['3C286_A']['flagged'], 499200.0)
     self.assertEqual(summary['field']['3C286_B']['flagged'], 0)
     self.assertEqual(summary['field']['3C286_C']['flagged'], 0)
     self.assertEqual(summary['field']['3C286_D']['flagged'], 0)

开发者ID:radio-astro，项目名称:casa，代码行数:10，代码来源:test_flagcmd.py

示例9: test_action_plot_table

 def test_action_plot_table(self):
     '''flagcmd: Test action=plot, nothing plotted'''
     outplot = 'noplot.png'
     flagcmd(vis=self.vis, inpmode='list', 
         inpfile=["intent='CAL*POINT*' field=''","scan='5'"], 
         action='list', savepars=True)
     
     flagcmd(vis=self.vis, inpmode='table', useapplied=True, action='plot',
             plotfile=outplot)
     
     self.assertTrue(os.path.exists(outplot),'Plot file was not created')

开发者ID:radio-astro，项目名称:casa，代码行数:11，代码来源:test_flagcmd.py

示例10: test_action_plot_list

 def test_action_plot_list(self):
     '''flagcmd: Test action=plot to plot 4 antennas and no timerange'''
     outplot = 'fourplot.png'
     cmds = ["antenna='ea01' reason='none'",
             "antenna='ea11' reason='no_reason'",
             "antenna='ea19' reason='none'",
             "antenna='ea24' reason='other'"]
     
     flagcmd(vis=self.vis, inpmode='list', inpfile=cmds, action='plot',plotfile=outplot)
             
     self.assertTrue(os.path.exists(outplot),'Plot file was not created')

开发者ID:radio-astro，项目名称:casa，代码行数:11，代码来源:test_flagcmd.py

示例11: test_MS_flagcmds

 def test_MS_flagcmds(self):
     """Flagcmd:: Save flags to MS and apply to cal table"""
     self.setUp_data4rflag()
     msfile = self.vis
     flagcmd(vis=msfile, action='clear', clearall=True)
     flagdata(vis=msfile, antenna='ea09', action='', savepars=True)
     
     self.setUp_bpass_case()
     flagcmd(vis=self.vis, inpfile=msfile, action='apply', flagbackup=False)
     summary=flagdata(vis=self.vis, mode='summary')
     self.assertEqual(summary['antenna']['ea09']['flagged'], 48000.0)
     self.assertEqual(summary['antenna']['ea10']['flagged'], 0.0)

开发者ID:radio-astro，项目名称:casa，代码行数:12，代码来源:test_flagcmd.py

示例12: test_list_field_Selection_for_bpass

    def test_list_field_Selection_for_bpass(self):
        """Flagcmd:: Manually flag a bpass-based CalTable using file in list mode """
        
        myinput = "field='3C286_A'"
        filename = create_input(myinput)

        flagcmd(vis=self.vis, inpmode='list', inpfile=filename, flagbackup=False)
        summary=flagdata(vis=self.vis, mode='summary')
        self.assertEqual(summary['field']['3C286_A']['flagged'], 499200.0)
        self.assertEqual(summary['field']['3C286_B']['flagged'], 0)
        self.assertEqual(summary['field']['3C286_C']['flagged'], 0)
        self.assertEqual(summary['field']['3C286_D']['flagged'], 0)

开发者ID:radio-astro，项目名称:casa，代码行数:12，代码来源:test_flagcmd.py

示例13: test_cmd

 def test_cmd(self):
     '''flagcmd: inpmode=list with empty parameter'''
     
     # Test the correct parsing with empty parameter such as antenna=''
     flagcmd(vis=self.vis, inpmode='list', 
              inpfile=["intent='CAL*POINT*' field=''","scan='1,8' antenna=''","scan='10'"], 
              action='apply', savepars=False, flagbackup=False)
     res = flagdata(vis=self.vis,mode='summary')
     self.assertEqual(res['scan']['1']['flagged'], 192416)
     self.assertEqual(res['scan']['8']['flagged'], 39096)
     self.assertEqual(res['scan']['10']['flagged'], 39096)
     self.assertEqual(res['flagged'], 270608)

开发者ID:radio-astro，项目名称:casa，代码行数:12，代码来源:test_flagcmd.py

示例14: test_apply4

    def test_apply4(self):
        """importevla: Save online flags to FLAG_CMD and file; do not apply"""

        # Use default msname and outfile
        msname = "xosro4.ms"
        cmdfile = msname.replace(".ms", "_cmd.txt")
        if os.path.exists(msname):
            os.system("rm -rf " + msname)
        if os.path.exists(cmdfile):
            os.system("rm -rf " + cmdfile)

        importevla(
            asdm=self.asdm,
            vis=msname,
            scans="2",
            online=True,
            shadow=False,
            flagzero=False,
            applyflags=False,
            savecmds=True,
            flagbackup=False,
        )

        # No flags were applied
        res = flagdata(vis=msname, mode="summary")
        self.assertEqual(res["flagged"], 0)

        # Apply only row 213 using flagcmd
        # The command in row 213 is the following:
        # antenna='ea06' timerange='2012/02/22/22:30:55.200~2012/02/22/22:35:08.199'
        # spw='EVLA_X#A0C0#0' correlation='LL,LR,RL
        flagcmd(vis=msname, action="apply", tablerows=213)

        # Check flags. RR should no be flagged
        res = flagdata(vis=msname, mode="summary")
        self.assertEqual(res["correlation"]["RR"]["flagged"], 0, "RR should not be flagged")
        self.assertEqual(res["correlation"]["LL"]["flagged"], 29440)
        self.assertEqual(res["correlation"]["LR"]["flagged"], 29440)
        self.assertEqual(res["correlation"]["RL"]["flagged"], 29440)
        self.assertEqual(res["antenna"]["ea06"]["flagged"], 88320)
        self.assertEqual(res["antenna"]["ea07"]["flagged"], 3840, "Only a few baselines should be flagged")
        self.assertEqual(res["antenna"]["ea08"]["flagged"], 3840, "Only a few baselines should be flagged")

        # Check output file existence
        self.assertTrue(os.path.exists(cmdfile))

        # Check file content
        ff = open(cmdfile, "r")
        cmdlist = ff.readlines()
        ncmds = cmdlist.__len__()
        ff.close()
        self.assertEqual(ncmds, 214, "Only Online cmds should have been saved to file")

开发者ID:radio-astro，项目名称:casa，代码行数:52，代码来源:test_importevla.py

示例15: test_utfcrop

    def test_utfcrop(self):
        '''flagcmd: unapply tfcrop agent'''
        # Remove any cmd from table
        flagcmd(vis=self.vis, action='clear', clearall=True)

        # Flag using manual agent
        myinput = "scan='1'"
        filename = create_input(myinput)
        flagcmd(vis=self.vis, inpmode='list', inpfile=filename, action='apply', savepars=True)
        
        # Flag using tfcrop agent from file
        # Note : For this test, scan=4 gives identical flags on 32/64 bit machines,
        #           and one flag difference on a Mac (32)
        #           Other scans give differences at the 0.005% level.
        myinput = "scan='4' mode=tfcrop correlation='ABS_RR' extendflags=False"
        filename = create_input(myinput)
        flagcmd(vis=self.vis, inpmode='list', inpfile=filename, action='apply', savepars=True,
                flagbackup=False)
        res = flagdata(vis=self.vis,mode='summary')
        self.assertEqual(res['scan']['1']['flagged'], 568134, 'Whole scan=1 should be flagged')
        #self.assertEqual(res['scan']['4']['flagged'], 1201, 'scan=4 should be partially flagged')
        self.assertTrue(res['scan']['4']['flagged']>= 1200 and res['scan']['4']['flagged']<= 1204, \
                        'scan=4 should be partially flagged')
        
        # Unapply only the tfcrop line
        flagcmd(vis=self.vis, action='unapply', useapplied=True, tablerows=1, savepars=False)
        result = flagdata(vis=self.vis,mode='summary',scan='4')
        self.assertEqual(result['flagged'], 0, 'Expected 0 flags, found %s'%result['flagged'])
        self.assertEqual(result['total'], 95256,'Expected total 95256, found %s'%result['total'])

开发者ID:radio-astro，项目名称:casa，代码行数:29，代码来源:test_flagcmd.py

示例16: test_save_cal

 def test_save_cal(self):
     '''Flagcmd: list flag cmds from MS and save to a file'''
     self.setUp_data4rflag()
     msfile = self.vis
     flagcmd(vis=msfile, action='clear', clearall=True)
     
     # Save cmds to FLAG_CMD table
     flagcmd(vis=msfile, inpmode='list', inpfile=["spw='1,3",
                                                  "mode='clip' clipminmax=[0,500] datacolumn='SNR'"], 
             action='list', savepars=True)
     
     self.setUp_bpass_case()
     flagcmds = 'calflags.txt'
     if os.path.exists(flagcmds):
         os.system('rm -rf '+flagcmds)
         
     # Apply to cal table and save to an external file
     flagcmd(vis=self.vis, inpmode='table', inpfile=msfile, savepars=True, outfile=flagcmds)
     self.assertTrue(os.path.exists(flagcmds))
     res = flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['flagged'], 246315)
     
     # Apply from list in file and compare
     flagdata(vis=self.vis, mode='unflag')
     flagcmd(vis=self.vis, inpmode='list', inpfile=flagcmds, action='apply')
     res = flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['flagged'], 246315)

开发者ID:radio-astro，项目名称:casa，代码行数:27，代码来源:test_flagcmd.py

示例17: test_umanualflag

    def test_umanualflag(self):
        '''flagcmd: unapply manual agent'''
        # Remove any cmd from table
        flagcmd(vis=self.vis, action='clear', clearall=True)

        # Flag using manual agent
        myinput = "scan='1'"
        filename = create_input(myinput)
        flagcmd(vis=self.vis, inpmode='list', inpfile=filename, action='apply', savepars=True,
                flagbackup=False)

        # Flag using the quack agent
        myinput = "scan='1~3' mode=quack quackinterval=1.0"
        filename = create_input(myinput)
        flagcmd(vis=self.vis, inpmode='list', inpfile=filename, action='apply', savepars=True,
                flagbackup=False)
        
        # Unapply the manual line
        flagcmd(vis=self.vis, action='unapply', useapplied=True, tablerows=0, savepars=False)
        result = flagdata(vis=self.vis,mode='summary',scan='1,2,3')
        
        # scan 1 should be fully unflagged
        self.assertEqual(result['scan']['1']['flagged'], 0)
        self.assertEqual(result['scan']['2']['flagged'], 47628)
        self.assertEqual(result['scan']['3']['flagged'], 47628)
        self.assertEqual(result['flagged'], 47628+47628)

开发者ID:radio-astro，项目名称:casa，代码行数:26，代码来源:test_flagcmd.py

示例18: test_cal_time_field

 def test_cal_time_field(self):
     '''Flagcmd: clip a timerange from a field'''
     # this timerange corresponds to field 3C286_D
     flags = "mode='clip' timerange='>14:58:33.6' clipzeros=True clipminmax=[0.,0.4]"\
             " datacolumn='CPARAM'"
     
     # Apply the flags
     flagcmd(vis=self.vis, inpmode='list', inpfile=[flags], flagbackup=False)
     res=flagdata(vis=self.vis, mode='summary')
     self.assertEqual(res['field']['3C286_A']['flagged'],0)
     self.assertEqual(res['field']['3C286_B']['flagged'],0)
     self.assertEqual(res['field']['3C286_C']['flagged'],0)
     self.assertEqual(res['field']['3C286_D']['flagged'],2221)
     self.assertEqual(res['flagged'],2221)

开发者ID:radio-astro，项目名称:casa，代码行数:14，代码来源:test_flagcmd.py

示例19: test_uquack

    def test_uquack(self):
        '''flagcmd: unapply quack agent'''
        # Remove any cmd from table
        flagcmd(vis=self.vis, action='clear', clearall=True)

        # Flag using the quack agent
        myinput = "scan='1~3' mode=quack quackinterval=1.0"
        filename = create_input(myinput)
        flagcmd(vis=self.vis, inpmode='list', inpfile=filename, action='apply', savepars=True,
                flagbackup=False)
        result = flagdata(vis=self.vis,mode='summary')
        quack_flags = result['scan']['1']['flagged']

        # Flag using manual agent
        myinput = "scan='1'"
        filename = create_input(myinput)
        flagcmd(vis=self.vis, inpmode='list', inpfile=filename, action='apply', savepars=True,
                flagbackup=False)
        result = flagdata(vis=self.vis,mode='summary')
        scan1_flags = result['scan']['1']['flagged']

        # Unapply only the quack line
        flagcmd(vis=self.vis, action='unapply', useapplied=True, tablerows=0, savepars=True)
        result = flagdata(vis=self.vis,mode='summary')
        manual_flags = result['scan']['1']['flagged']
        
        # Only the manual flags should be there
#         self.assertEqual(result['flagged'], 568134, 'Expected 568134 flags, found %s'%result['flagged'])
#         self.assertEqual(result['total'], 568134,'Expected total 568134, found %s'%result['total'])
        # CAS-5377. New unapply action
        self.assertEqual(result['scan']['3']['flagged'], 0)
        self.assertEqual(manual_flags,scan1_flags - quack_flags)

开发者ID:radio-astro，项目名称:casa，代码行数:32，代码来源:test_flagcmd.py

示例20: test_intent

    def test_intent(self):
        '''flagcmd: test scan intent selection'''
        
        myinput = "intent='CAL*POINT*'\n"\
                "#scan=3,4"
        filename = create_input(myinput)
        
        # flag POINTING CALIBRATION scans and ignore comment line
        flagcmd(vis=self.vis, inpmode='list', inpfile=filename, action='apply', savepars=False,
                flagbackup=False)
#         test_eq(flagdata(vis=self.vis,mode='summary', antenna='2'), 377280, 26200)
        res = flagdata(vis=self.vis,mode='summary')
#         self.assertEqual(res['scan']['1']['flagged'], 80184, 'Only scan 1 should be flagged')
#         self.assertEqual(res['scan']['4']['flagged'], 0, 'Scan 4 should not be flagged')
        self.assertEqual(res['scan']['1']['flagged'], 192416.0)

开发者ID:radio-astro，项目名称:casa，代码行数:15，代码来源:test_flagcmd.py

注：本文中的tasks.flagcmd函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python tasks.flagdata函数代码示例发布时间：2022-05-27

Python tasks.cvel2函数代码示例发布时间：2022-05-27

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13941|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10292|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4177|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4064|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3889|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3539|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3070|2022-01-22

8 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2731|2022-01-22

9 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2682|2022-05-25

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2349|2022-01-22

客服电话

电子邮件

Python tasks.flagcmd函数代码示例

示例1: test_default_cparam

示例2: test_compatibility

示例3: test_clip_one_list

示例4: test_CAS4819

示例5: test_list_reason1

示例6: test_cal_observation

示例7: test_xml2

示例8: test_manual_field_selection_for_bpass

示例9: test_action_plot_table

示例10: test_action_plot_list

示例11: test_MS_flagcmds

示例12: test_list_field_Selection_for_bpass

示例13: test_cmd

示例14: test_apply4

示例15: test_utfcrop

示例16: test_save_cal

示例17: test_umanualflag

示例18: test_cal_time_field

示例19: test_uquack

示例20: test_intent

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053