• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Python system.system函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Python中system.system函数的典型用法代码示例。如果您正苦于以下问题:Python system函数的具体用法?Python system怎么用?Python system使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了system函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: restart

 def restart(self):
     yield self._lock.acquire()
     try:
         yield system.system('ifconfig', self.iface, '0.0.0.0')
         yield system.system('ifconfig', self.iface, 'down')
     finally:
         self._lock.release()
开发者ID:PR2,项目名称:linux_networking,代码行数:7,代码来源:interface_upper.py


示例2: _locked_cb

    def _locked_cb(self, old_state, new_state):
        if self._iface_status_pub.get() >= IFSTATE.PLUGGED:
            yield system.system('ip', 'route', 'flush', 'table', self.table, 'dev', self.iface)

        if new_state:
            gateway = new_state['gateway']
            ip = new_state['ip']
            network_slashed = new_state['network_slashed']
            yield system.system('ip', 'route', 'add', 'table', self.table, 'default', 'dev', self.iface, 'via', gateway, 'src', ip, 'onlink')
            yield system.system('ip', 'route', 'add', 'table', self.table, network_slashed, 'dev', self.iface, 'src', ip)
开发者ID:PR2,项目名称:linux_networking,代码行数:10,代码来源:dhcp_apply_config.py


示例3: __init__

    def __init__(self):
        self.interfaces = {}
        self.update_event = event.Event()
        self.update_interval = 1
        self.radio_manager = radio_manager.RadioManager()
        self.inactive_penalty = config.get_parameter('inactive_penalty', 50)
        self.forced_interface = ""
        self.tunnel_interface = config.get_parameter('tunnel_interface', "")
        self.use_tunnel = True
        self.active_interfaces = []

        self.basestation = config.get_parameter('base_station')
#        print "Resolving basestation IP. (Blocking operation.)"
#        self.basestation_ip = socket.gethostbyname(config.get_parameter('base_station'))

        # Add rules to guarantee that local routes go to the main table.
#        self.local_net_rule = ip_rule.IpRule(RULEID.LOCAL)
#        for subnet in config.get_parameter('local_networks'):
#            self.local_net_rule.add('to', subnet, 'lookup', 'main')

        self.local_net_rules = []
        for (i, subnet) in enumerate(config.get_parameter('local_networks')):
            self.local_net_rules.append(ip_rule.IpRule(RULEID.LOCAL+i))
            self.local_net_rules[i].add('to', subnet, 'lookup', 'main')

        # Add a rule to send through the vpn.
        if self.tunnel_interface:
            self.vpn_rule = ip_rule.IpRule(RULEID.DEFAULT)
            # Use LINK here because netlink_monitor's parsing rules don't
            # currently work on vpn interfaces.
            system.system('ip', 'route', 'flush', 'table', str(RULEID.DEFAULT))
            netlink_monitor.get_state_publisher(self.tunnel_interface,
                    IFSTATE.LINK).subscribe(self._refresh_default_route)


        # Create all the interfaces.
        interface_names = config.get_parameter('interfaces').keys()
        ifaceid = RULEID.FIRST_IFACE
        for iface in interface_names:
            try:
                new_iface = self.interfaces[iface] = interface.construct(iface, ifaceid)
                new_iface.score = InterfaceSelector.TERRIBLE_INTERFACE 
                new_iface.prescore = InterfaceSelector.TERRIBLE_INTERFACE
                ifaceid += 1
            except interface.NoType:
                print >> sys.stderr, "Interface %s has no type."%iface
                sys.exit(1)
            except interface.UnknownType, e:
                print >> sys.stderr, "Interface %s has unknown type %s."%(iface, e)
                sys.exit(1)
            except:
开发者ID:PR2,项目名称:linux_networking,代码行数:51,代码来源:interface_selector.py


示例4: UpdateDB

def UpdateDB(corp, victims) :
    chars = corp.chars
    systems = corp.systems

    NewNotifs = []
    for name, char in chars.items() :
        print("Loading data for " + name + "...")
        NewNotifs += char.GetNotifications()
        #NewNotifs = NewNotifs + char.GetNotifications()

    ProcessKills(NewNotifs, victims)

    for n in NewNotifs :
        if n.system not in corp.systems :
            corp.systems[n.system] = system.system(n.system, corp.ID)

        if n.type == 'plex' :
            n.char.addPlex(n)
            corp.addPlex(n)
            corp.systems[n.system].addPlex(n)
        if n.type == 'kill' :
            corp.systems[n.system].addKill(n)
            n.char.addKill(n)
            corp.addKill(n)

    for i in [chars, systems] :
        for k, v in i.items() :
            v.save()
    corp.save()
开发者ID:NikolaiAgnon,项目名称:plexbox,代码行数:29,代码来源:plexers.py


示例5: main

def main():
    app = system.system()
    app.setup()

    #app.switch_mode(mode.play.play())
    app.switch_mode(mode.menu.menu())
    app.run()
开发者ID:srynot4sale,项目名称:farming,代码行数:7,代码来源:main.py


示例6: eddieguts

def eddieguts(Config, eddieHistory):

    # instantiate a process list
    log.log( "<eddie>eddieguts(), creating process object", 8 )
    directive.plist = proc.procList()

    # instantiate a disk usage list
    log.log( "<eddie>eddieguts(), creating df object", 8 )
    directive.dlist = df.dfList()

    # instantiate a netstat list
    log.log( "<eddie>eddieguts(), creating netstat object", 8 )
    directive.nlist = netstat.netstat()

    # instantiate a system object
    log.log( "<eddie>eddieguts(), creating system object", 8 )
    directive.system = system.system()

    if module_iostat:
        # instantiate an iostat object
        log.log( "<eddie>eddieguts(), creating iostat object", 8 )
        directive.iostat = iostat.iostat()

    # Now do all the checking
    log.log( "<eddie>eddieguts(), beginning checks", 7 )
    check(Config)

    # Save history (debug.. FS only for now...)
    eddieHistory.save('FS',directive.dlist)
开发者ID:hexdump42,项目名称:eddie-tool,代码行数:29,代码来源:eddie.py


示例7: GET

 def GET(self):
     import system
     data = system.system().GetConcifInfo()
     data['siteCount'] = public.M('sites').count()
     data['ftpCount'] = public.M('ftps').count()
     data['databaseCount'] = public.M('databases').count()
     data['lan'] = public.getLan('index')
     return render.index(data)
开发者ID:soitun,项目名称:BaoTa-Panel,代码行数:8,代码来源:main.py


示例8: _cb

 def _cb(self, old_state, new_state):
     plugged, up = new_state
     self.state = new_state
     if plugged and not up and not self._is_shutdown:
         yield self._lock.acquire()
         try:
             yield system.system('ifconfig', self.iface, 'up')
         finally:
             self._lock.release()
开发者ID:PR2,项目名称:linux_networking,代码行数:9,代码来源:interface_upper.py


示例9: _set_or_add

    def _set_or_add(self, remove_old, args):
        """Changes/adds the rule. Call with no arguments to clear the rule."""
        if self.is_shutdown:
            return
        yield self._lock.acquire()
        try:
            # Are we replacing a rule with itself?
            if remove_old and self.prev and args == self.prev:
                return
            # Add new rule
            if args:
                yield system.system('ip', 'rule', 'add', "priority", self.priority, *args)
            # Add remove old rule
            if self.prev and remove_old:
                yield system.system('ip', 'rule', 'del', "priority", self.priority, *self.prev)
            self.prev = args
            self.state_pub.set(args)

        finally:
            self._lock.release()
开发者ID:PR2,项目名称:linux_networking,代码行数:20,代码来源:ip_rule.py


示例10: flush

 def flush(self):
     self.prev = () # Won't hurt to do it here, just means we might not
                    # delete during ongoing set. Ensures it is set at
                    # end of construction.
     yield self._lock.acquire()
     try:
         retcode = None
         while not retcode:
             retcode = yield system.system(system.Quiet, 'ip', 'rule', 'del', 'priority', self.priority)
     finally:
         self._lock.release()
开发者ID:PR2,项目名称:linux_networking,代码行数:11,代码来源:ip_rule.py


示例11: LoadSystems

def LoadSystems(corpid, fpath = vars.systems) :
    systems = {}
    for fname in os.listdir(fpath + corpid + '/systems/') :
        try :
            with open(fpath + corpid + '/systems/' + fname, 'r') as file :
                js = json.load(file)
                newsys = system.system(js['name'], corpid)
                systems[js['name']] = newsys
        finally :
            pass
    return systems
开发者ID:NikolaiAgnon,项目名称:plexbox,代码行数:11,代码来源:persistence.py


示例12: initialize

def initialize():
	pl.close('all')
	global info, network, system, traces, torus, sweepingPhasespace
	reload(model)

	info = nf.info()
	network = netw.network(info=info)
	system = sys.system(info=info, network=network)
	traces = tra.traces(system, network, info=info)
	torus = tor.torus(system, network, traces, info=info)
	network.system = system
	system.traces = traces


	## customize system for web
	system.setParams(epsilon=0.3)
	system.ax.set_xlabel(r'Inactivation Variable')
	system.ax.set_ylabel(r'Voltage Variable')
	system.ax.set_title('')
	system.fig.tight_layout()
	plugins.connect(system.fig, DragPlugin(eventHandlerURL="updatesystem", radioButtonID="systemRadio"))

	# customize network
	network.ax.patch.set_facecolor('#777777')
	network.moveText(2, [0.02, -0.1])
	network.moveText(3, [0.02, -0.1])
	network.ax.texts[6].set_text('1')
	network.ax.texts[7].set_text('2')
	network.ax.texts[8].set_text('3')
	plugins.connect(network.fig, DragPlugin(eventHandlerURL="updatenetwork", radioButtonID="networkRadio"))

	# customize traces
	traces.ax.patch.set_facecolor('#777777')
	traces.fig.tight_layout()

	# customize torus
	torus.ax_traces.set_xlabel(r'phase lag: 1-2')
	torus.ax_basins.set_xlabel(r'phase lag: 1-2')
	torus.ax_traces.set_ylabel(r'phase lag: 1-3')
	torus.fig.tight_layout()
	torus.switch_processor()	# switches on the gpu if available
	if torus.USE_GPU: torus.setGridsize(24)
	plugins.connect(torus.fig, ClickPlugin(eventHandlerURL="updatetorus", radioButtonID="torusRadio"))

	# reload timing variable
	sweepingPhasespace = False;
开发者ID:jusjusjus,项目名称:Motiftoolbox,代码行数:46,代码来源:webrun.py


示例13: GetSshInfo

    def GetSshInfo(self,get):
        file = '/etc/ssh/sshd_config'
        conf = public.readFile(file)
        rep = "#*Port\s+([0-9]+)\s*\n"
        port = re.search(rep,conf).groups(0)[0]
        import system
        panelsys = system.system();
        
        version = panelsys.GetSystemVersion();
        if not os.path.exists('/etc/redhat-release'):
             status = public.ExecShell("service ssh status | grep 'dead'")
        else:
            if version.find(' 7.') != -1:
                status = public.ExecShell("systemctl status sshd.service | grep 'dead'")
            else:
                status = public.ExecShell("/etc/init.d/sshd status | grep -e 'stopped' -e '已停'")
            
#       return status;
        if len(status[0]) > 3:
            status = False
        else:
            status = True
        isPing = True
        try:
            file = '/etc/sysctl.conf'
            conf = public.readFile(file)
            rep = "#*net\.ipv4\.icmp_echo_ignore_all\s*=\s*([0-9]+)"
            tmp = re.search(rep,conf).groups(0)[0]
            if tmp == '1': isPing = False
        except:
            isPing = True
        
        
        
        data = {}
        data['port'] = port
        data['status'] = status
        data['ping'] = isPing
        return data
开发者ID:soitun,项目名称:BaoTa-Panel,代码行数:39,代码来源:firewalls.py


示例14: testCpu

 def testCpu(self,get,n = 1):
     data = {}
     data['cpuCount'] = psutil.cpu_count();
     if not hasattr(get,'type'): get.type = '0';
     import re;
     cpuinfo = open('/proc/cpuinfo','r').read();
     rep = "model\s+name\s+:\s+(.+)"
     tmp = re.search(rep,cpuinfo);
     data['cpuType'] = ""
     if tmp:
         data['cpuType'] = tmp.groups()[0];
     
     import system
     data['system'] = system.system().GetSystemVersion();
     path = '/www/server/panel/plugin/score/testcpu';
     if not os.path.exists(path): os.system('gcc '+path+'.c -o ' +path + ' -lpthread');
     start = time.time();
     os.system(path + ' 32 ' + get.type);
     end = time.time();
     data['score'] = int(400 * 10 / (end - start));
     if not os.path.exists(path): data['score'] = 0;
     self.writeScore('cpu'+get.type, data['score'])
     return data;
     pass
开发者ID:soitun,项目名称:BaoTa-Panel,代码行数:24,代码来源:score_main.py


示例15: UpdatePanel

 def UpdatePanel(self,get):
     #return public.returnMsg(False,'演示服务器,禁止此操作!');
     try:
         if not public.IsRestart(): return public.returnMsg(False,'EXEC_ERR_TASK');
         import web,json
         if int(web.ctx.session.config['status']) == 0:
             public.httpGet(web.ctx.session.home+'/Api/SetupCount?type=Linux');
             public.M('config').where("id=?",('1',)).setField('status',1);
         
         #取回远程版本信息
         if hasattr(web.ctx.session,'updateInfo') == True and hasattr(get,'check') == False:
             updateInfo = web.ctx.session.updateInfo;
         else:
             login_temp = 'data/login.temp';
             if os.path.exists(login_temp):
                 logs = public.readFile(login_temp)
                 os.remove(login_temp);
             else:
                 logs = '';
             import psutil,panelPlugin,system;
             mem = psutil.virtual_memory();
             mplugin = panelPlugin.panelPlugin();
             mplugin.ROWS = 10000;
             panelsys = system.system();
             data = {}
             data['sites'] = str(public.M('sites').count());
             data['ftps'] = str(public.M('ftps').count());
             data['databases'] = str(public.M('databases').count());
             data['system'] = panelsys.GetSystemVersion() + '|' + str(mem.total / 1024 / 1024) + 'MB|' + public.getCpuType() + '*' + str(psutil.cpu_count()) + '|' + public.get_webserver() + '|' + web.ctx.session.version;
             data['system'] += '||'+self.GetInstalleds(mplugin.getPluginList(None));
             data['logs'] = logs
             data['oem'] = ''
             data['intrusion'] = self.get_ssh_intrusion();
             msg = public.getMsg('PANEL_UPDATE_MSG');
             sUrl = web.ctx.session.home + '/Api/updateLinux';
             betaIs = 'data/beta.pl';
             betaStr = public.readFile(betaIs);
             if betaStr:
                 if betaStr.strip() != 'False':
                     sUrl = web.ctx.session.home + '/Api/updateLinuxBeta';
                     msg = public.getMsg('PANEL_UPDATE_MSG_TEST');
             
             betaIs = 'plugin/beta/config.conf';
             betaStr = public.readFile(betaIs);
             if betaStr:
                 if betaStr.strip() != 'False':
                     sUrl = web.ctx.session.home + '/Api/updateLinuxBeta';
                     msg = public.getMsg('PANEL_UPDATE_MSG_TEST');
             
             updateInfo = json.loads(public.httpPost(sUrl,data));
             if not updateInfo: return public.returnMsg(False,"CONNECT_ERR");
             updateInfo['msg'] = msg;
             web.ctx.session.updateInfo = updateInfo;
             
         #检查是否需要升级
         if updateInfo['version'] == web.ctx.session.version:
             try:
                 return public.returnMsg(False,updateInfo['msg']);
             except:
                 return public.returnMsg(False,'PANEL_UPDATE_ERR_NEW');
         
         
         #是否执行升级程序 
         if(updateInfo['force'] == True or hasattr(get,'toUpdate') == True or os.path.exists('data/autoUpdate.pl') == True):
             setupPath = web.ctx.session.setupPath;
             uptype = 'update';
             betaIs = 'plugin/beta/config.conf';
             betaStr = public.readFile(betaIs);
             if betaStr:
                 if betaStr.strip() != 'False': uptype = 'updateTest';
             betaIs = 'data/beta.pl';
             betaStr = public.readFile(betaIs);
             if betaStr:
                 if betaStr.strip() != 'False': uptype = 'updateTest';
             httpUrl = public.get_url();
             if httpUrl: updateInfo['downUrl'] =  httpUrl + '/install/' + uptype + '/LinuxPanel-' + updateInfo['version'] + '.zip';
             
             public.downloadFile(updateInfo['downUrl'],'panel.zip');
             if os.path.getsize('panel.zip') < 1048576: return public.returnMsg(False,"PANEL_UPDATE_ERR_DOWN");
             public.ExecShell('unzip -o panel.zip -d ' + setupPath + '/');
             import compileall
             if os.path.exists(setupPath + '/panel/main.py'): public.ExecShell('rm -f ' + setupPath + '/panel/*.pyc');
             if os.path.exists(setupPath + '/panel/class/common.py'): public.ExecShell('rm -f ' + setupPath + '/panel/class/*.pyc');
             
             compileall.compile_dir(setupPath + '/panel');
             compileall.compile_dir(setupPath + '/panel/class');
             public.ExecShell('rm -f panel.zip');
             web.ctx.session.version = updateInfo['version']
             return public.returnMsg(True,'PANEL_UPDATE',(updateInfo['version'],));
         
         #输出新版本信息
         data = {
             'status' : True,
             'version': updateInfo['version'],
             'updateMsg' : updateInfo['updateMsg']
         };
         
         public.ExecShell('rm -rf /www/server/phpinfo/*');
         return data;
     except Exception,ex:
#.........这里部分代码省略.........
开发者ID:soitun,项目名称:BaoTa-Panel,代码行数:101,代码来源:ajax.py


示例16: range

state6 = statements.get_takeValue('L1')
state7 = statements.get_takeValue('L2')
state8 = statements.get_takeValue('L3')
state9 = statements.get_takeValue('L4')
boolStatements = [state2,state3,state4,state5]
numStatements = [state0,state1,state6,state7,state8,state9]

slist = [createSample_prejudiced() for i in range(1000)]
numparams= ['A','B','L1','L2','L3','L4']
boolparams = ['O','C1','C2','G']
keyparams = ['R','C']
                                  
import time
import system
t = time.time()
sys = system.system(keyparams,boolparams,numparams,slist,6000,300,15)
keyStates =sys.keyStatements


import helpers
sysLog = helpers.logWriter()
sysDump = helpers.logWriter()

sys.setLogWriter(sysLog)
sys.setDumpWriter(sysDump)
def runSimulation(rounds = 100,tests = 500):
    sys.initialise()
    sysLog.printToConsole()
    num = tests
    flog = open("lastLog.log",'w')
    fdump = open("lastDump.log",'w')
开发者ID:justheuristic,项目名称:GraveRobot,代码行数:31,代码来源:debug_version.py


示例17:


import system as sys
import network3N as netw
import traces as tra
import info as nf
import torus as tor
import pylab as pl

pos_info = '+0+600'
pos_tra = '+300+600'
pos_net = '+300+0'
pos_sys = '+0+0'
pos_torus = '+800+0'

info = nf.info(position=pos_info)
net = netw.network(g_inh=0.015, info=info, position=pos_net)
system = sys.system(info=info, position=pos_sys, network=net)
traces = tra.traces(system, net, info=info, position=pos_tra)
torus = tor.torus(system, net, traces, info=info, position=pos_torus)

net.system = system
system.traces = traces

if pl.get_backend() == 'TkAgg':
	system.fig.tight_layout()
	traces.fig.tight_layout()
	torus.fig.tight_layout()

pl.show()
开发者ID:jusjusjus,项目名称:Motiftoolbox,代码行数:28,代码来源:run.py


示例18:

from parameter import parameter
from system import system
from selenium import webdriver
from selenium.webdriver.common.keys import Keys
import time
from datetime import datetime
from selenium.webdriver.support.ui import WebDriverWait
import logging
import os
system=system()
parameter=parameter()
parameter.textinput()
parameter.tel()
driver=webdriver.Firefox()
logging.info('open url')
driver.get_screenshot_as_file(system.FileName())
开发者ID:liumeixia,项目名称:xiaworkspace,代码行数:16,代码来源:run.py


示例19:

#!/usr/bin/env python

import system as sys
import traces as tra
import info as nf
import pylab as pl


pos_info = '+0+600'
pos_tra = '+300+600'
pos_sys = '+0+0'


i = nf.info(position=pos_info)
s = sys.system(info=i, position=pos_sys)
t = tra.traces(s, info=i, position=pos_tra)

if pl.get_backend() == 'TkAgg':
	s.fig.tight_layout()
	t.fig.tight_layout()

pl.show()
开发者ID:RamiJacob,项目名称:Motiftoolbox,代码行数:22,代码来源:run.py


示例20: get_service_info

 def get_service_info(self,get):
     import system;
     serviceInfo = system.system().GetConcifInfo(get);
     del(serviceInfo['mysql_root']);
     return serviceInfo;
开发者ID:soitun,项目名称:BaoTa-Panel,代码行数:5,代码来源:safelogin_main.py



注:本文中的system.system函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Python system.MogamiLog类代码示例发布时间:2022-05-27
下一篇:
Python syslog.syslog函数代码示例发布时间:2022-05-27
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap