本文整理汇总了Python中sys.gettrace函数的典型用法代码示例。如果您正苦于以下问题:Python gettrace函数的具体用法?Python gettrace怎么用?Python gettrace使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了gettrace函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: stop
def stop(self):
"""Stop this Tracer."""
if hasattr(sys, "gettrace") and self.warn:
if sys.gettrace() != self._trace:
msg = "Trace function changed, measurement is likely wrong: %r"
self.warn(msg % sys.gettrace())
sys.settrace(None)
开发者ID:overtherain,项目名称:simpleHttpServer,代码行数:7,代码来源:collector.py
示例2: wrapper
def wrapper(*args, **kwargs):
result = []
def test_func_thread(test_func, *args, **kwargs):
try:
test_func(*args, **kwargs)
except Exception as e:
result.append(e)
finally:
result.append("done")
test_timer = threading.Timer(interval, result.append, args=("interrupted",))
test_thread = threading.Thread(target=test_func_thread,
args=(test_func,) + args,
kwargs=kwargs)
test_thread.setDaemon(not sys.gettrace()) # in debug mode make thread blocking main
test_thread.start()
if not sys.gettrace(): # disable this in debug mode
test_timer.start()
while True:
if test_thread.is_alive() and test_timer.is_alive():
time.sleep(0.1)
else:
break
if "interrupted" in result:
raise Exception("%s did not finish in %s seconds" % (test_func.__name__,
interval))
else:
test_timer.cancel()
for test_result in result:
if test_result not in ["done", "interrupted"]:
raise test_result
开发者ID:EugeniuZ,项目名称:amqp_protocol_debugger,代码行数:33,代码来源:test_protocol.py
示例3: test_trace_merge
def test_trace_merge():
with hunter.trace(function="a"):
with hunter.trace(function="b"):
with hunter.trace(function="c"):
assert sys.gettrace().handler == When(Q(function="c"), CodePrinter)
assert sys.gettrace().handler == When(Q(function="b"), CodePrinter)
assert sys.gettrace().handler == When(Q(function="a"), CodePrinter)
开发者ID:oroulet,项目名称:python-hunter,代码行数:7,代码来源:test_hunter.py
示例4: test_checking
def test_checking(self):
def fake_trace(*args):
return
old_trace = sys.gettrace()
sys.settrace(fake_trace)
with self.assertRaises(AssertionError):
# We know f1's behavior but we run f2, raise attention on it
with checking(name='test_check', trace_all=True):
f2('Traced code')
# It has created a summary file
self.assertTrue(os.path.exists('test_check-last-change.txt'))
with open('test_check-last-change.txt') as f:
change = f.read()
change_lines = change.splitlines()
self.assertEqual(len(change_lines), 1)
self.assertIn('test_tools:f', change)
self.assertEqual(change[0], '!')
# It has put our trace function back
after_trace = sys.gettrace()
sys.settrace(old_trace)
self.assertEqual(after_trace, fake_trace)
开发者ID:naure,项目名称:PuppyParachute,代码行数:25,代码来源:test_tools.py
示例5: test_call_trace
def test_call_trace():
from syn.base_utils import call_trace, reset_trace, capture, CallTrace
def foo():
bar()
def bar():
pass
foo()
tr = sys.gettrace()
with capture() as (out, err):
with reset_trace():
call_trace()
foo()
assert sys.gettrace() is tr
assert out.getvalue() == 'foo\n bar\n__exit__\n reset_trace\n'
assert err.getvalue() == ''
t = CallTrace()
with capture() as (out, err):
t(sys._getframe(), 'call', None)
assert out.getvalue() == 'test_call_trace\n'
assert err.getvalue() == ''
assert t.indent == 1
t(sys._getframe(), 'return', None)
assert t.indent == 0
开发者ID:mbodenhamer,项目名称:syn,代码行数:30,代码来源:test_debug.py
示例6: test_start_and_stop
def test_start_and_stop(self):
assert None is sys.gettrace()
self.tm.start()
self.assertIn(self.tm, tracerlib._active_managers)
self.assertEqual(tracerlib._global_tracer, sys.gettrace())
self.tm.stop()
assert None is sys.gettrace()
开发者ID:caktus,项目名称:tracerlib,代码行数:7,代码来源:test.py
示例7: check_with_no_trace
def check_with_no_trace():
if False:
print('break on check_with_trace')
frame = sys._getframe()
if frame.f_trace is not None:
raise AssertionError('Expected %s to be None' % (frame.f_trace,))
if sys.gettrace() is not pydevd_frame_tracing.dummy_tracing_holder.dummy_trace_func:
raise AssertionError('Expected %s to be dummy_trace_func' % (sys.gettrace(),))
开发者ID:Elizaveta239,项目名称:PyDev.Debugger,代码行数:9,代码来源:_debugger_case_frame_eval.py
示例8: stop
def stop(self):
self.stopped = True
if self.thread != threading.currentThread():
return
if hasattr(sys, 'gettrace') and self.warn:
if sys.gettrace() != self._trace:
msg = 'Trace function changed, measurement is likely wrong: %r'
self.warn(msg % (sys.gettrace(),))
sys.settrace(None)
开发者ID:connoryang,项目名称:dec-eve-serenity,代码行数:9,代码来源:collector.py
示例9: stop
def stop(self):
"""
Stop this Tracer.
"""
if hasattr(sys, "gettrace") and self.log:
if sys.gettrace() != self._trace:
msg = "Trace function changed, measurement is likely wrong: %r"
print >> sys.stdout, msg % sys.gettrace()
sys.settrace(None)
开发者ID:dcramer,项目名称:peek,代码行数:9,代码来源:tracer.py
示例10: stop
def stop(self):
"""Stop this Tracer."""
if hasattr(sys, "gettrace") and self.warn:
if sys.gettrace() != self._trace:
msg = "Trace function changed, measurement is likely wrong: %r"
self.warn(msg % (sys.gettrace(),))
#--debug
#from coverage.misc import short_stack
#self.warn(msg % (sys.gettrace()))#, short_stack()))
sys.settrace(None)
开发者ID:portante,项目名称:coverage,代码行数:10,代码来源:collector.py
示例11: __call__
def __call__(self, enable=True):
if enable:
try:
self.thread_local.trace_backup.append(sys.gettrace())
except AttributeError:
self.thread_local.trace_backup = []
self.thread_local.trace_backup.append(sys.gettrace())
sys.settrace(self._traceit)
else:
sys.settrace(self.thread_local.trace_backup.pop())
开发者ID:slipstream,项目名称:SlipStreamClient,代码行数:10,代码来源:debug.py
示例12: test_gettrace
def test_gettrace(self):
'''TODO: revisit'''
self.assertEqual(sys.gettrace(), None)
def temp_func(*args, **kwargs):
pass
sys.settrace(temp_func)
self.assertEqual(sys.gettrace(), temp_func)
sys.settrace(None)
self.assertEqual(sys.gettrace(), None)
开发者ID:IronLanguages,项目名称:ironpython2,代码行数:11,代码来源:test_sys.py
示例13: test_gettrace
def test_gettrace():
'''TODO: revisit'''
AreEqual(sys.gettrace(), None)
def temp_func(*args, **kwargs):
pass
sys.settrace(temp_func)
AreEqual(sys.gettrace(), temp_func)
sys.settrace(None)
AreEqual(sys.gettrace(), None)
开发者ID:calbonaler,项目名称:DLR_Japanese,代码行数:11,代码来源:sys_test.py
示例14: run_thread
def run_thread(): # pragma: nested
"""Check that coverage is stopping properly in threads."""
deadline = time.time() + 5
ident = threading.currentThread().ident
if sys.gettrace() is not None:
has_started_coverage.append(ident)
while sys.gettrace() is not None:
# Wait for coverage to stop
time.sleep(0.01)
if time.time() > deadline:
return
has_stopped_coverage.append(ident)
开发者ID:hugovk,项目名称:coveragepy,代码行数:12,代码来源:test_concurrency.py
示例15: test_error_when_set_multiple
def test_error_when_set_multiple(self):
self.monitor._profile.replace(self.bar)
self.assertIs(sys.gettrace(), self.bar)
self.monitor._profile.replace(self.bar)
self.assertIs(sys.gettrace(), self.bar)
self.monitor._profile.recover()
self.monitor._profile.replace(self.bar)
self.assertIs(sys.gettrace(), self.bar)
with self.assertRaises(RuntimeError):
self.monitor._profile.replace(None)
self.assertIs(sys.gettrace(), self.bar)
self.monitor._profile.recover()
开发者ID:sjagoe,项目名称:pikos,代码行数:13,代码来源:test_trace_function_manager.py
示例16: test_multiple_managers
def test_multiple_managers(self):
tm = self.tm
tm2 = tracerlib.TracerManager()
with tm:
with tm2:
self.assertEqual(2, len(tracerlib._active_managers))
self.assertIn(tm, tracerlib._active_managers)
self.assertIn(tm2, tracerlib._active_managers)
self.assertEqual(tracerlib._global_tracer, sys.gettrace())
self.assertEqual(1, len(tracerlib._active_managers))
self.assertEqual(tracerlib._global_tracer, sys.gettrace())
self.assertEqual(0, len(tracerlib._active_managers))
self.assertEqual(None, sys.gettrace())
开发者ID:caktus,项目名称:tracerlib,代码行数:13,代码来源:test.py
示例17: _begin
def _begin():
"""Start tracking program state.
If begin() has previously been called, any labels that occur during this
execution will also be made visible to previous begin calls.
"""
sys.settrace(None)
assert sys.gettrace() is None
global prev_state
prev_state = 0
push_array()
sys.settrace(tracer)
assert sys.gettrace() is tracer
开发者ID:DRMacIver,项目名称:glassbox,代码行数:13,代码来源:pure.py
示例18: prepareTestCase
def prepareTestCase(self, test):
# TODO Test this for module-level tests
log.info('Tracing calls from %s', test)
# Let's assume that this Python interpreter *does* implement
# sys.gettrace/settrace
try:
sys.gettrace()
except RuntimeError:
raise SystemError('NoseDive requires sys.settrace')
tracer = TestTracer(inspect.getmodule(test.test).__file__)
sys.settrace(tracer)
开发者ID:mattboyer,项目名称:nosedive,代码行数:13,代码来源:depth.py
示例19: wrap
def wrap(f, self, request, *args, **kwargs):
#from api.handlers import log
c_type = request.content_type
try:
#data = data_loaders[c_type](request.raw_post_data)[field_name]
data = decode_from_string(c_type, request.raw_post_data)[field_name]
except KeyError as e:
if find_in_root:
data = decode_from_string(c_type, request.raw_post_data)
#data = data_loaders[c_type](request.raw_post_data)
else:
raise e, sys.gettrace()
setattr(request, operation, data)
return f(self, request, *args, **kwargs)
开发者ID:dismorfo,项目名称:NYU-Annotation-Service,代码行数:14,代码来源:utils.py
示例20: test_inject_cleans_up_tracefn_on_except
def test_inject_cleans_up_tracefn_on_except():
import sys
old_trace = sys.gettrace()
@inject(a=5)
def foo():
raise Exception()
try:
foo()
assert False, "should have raised an exception"
except:
pass
assert sys.gettrace() == old_trace
sys.settrace(old_trace)
开发者ID:noisland,项目名称:python-inject,代码行数:14,代码来源:test_inject.py
注:本文中的sys.gettrace函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论