本文整理汇总了Python中neurom.core.types.is_type函数的典型用法代码示例。如果您正苦于以下问题:Python is_type函数的具体用法?Python is_type怎么用?Python is_type使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了is_type函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: terminal_path_lengths_per_neurite
def terminal_path_lengths_per_neurite(neurites, neurite_type=NeuriteType.all):
"""Get the path lengths to each terminal point per neurite in a collection"""
return list(
sectionfunc.section_path_length(s)
for n in iter_neurites(neurites, filt=is_type(neurite_type))
for s in iter_sections(n, iterator_type=Tree.ileaf)
)
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:7,代码来源:_neuritefunc.py
示例2: trunk_origin_elevations
def trunk_origin_elevations(nrn, neurite_type=NeuriteType.all):
'''Get a list of all the trunk origin elevations of a neuron or population
The elevation is defined as the angle between x-axis and the
vector defined by (initial tree point - soma center)
on the x-y half-plane.
The range of the elevation angle [-pi/2, pi/2] radians
'''
neurite_filter = is_type(neurite_type)
nrns = neuron_population(nrn)
def _elevation(section, soma):
'''Elevation of a section'''
vector = morphmath.vector(section[0], soma.center)
norm_vector = np.linalg.norm(vector)
if norm_vector >= np.finfo(type(norm_vector)).eps:
return np.arcsin(vector[COLS.Y] / norm_vector)
else:
raise ValueError("Norm of vector between soma center and section is almost zero.")
return [_elevation(s.root_node.points, n.soma)
for n in nrns
for s in n.neurites if neurite_filter(s)]
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:25,代码来源:_neuronfunc.py
示例3: partition_pairs
def partition_pairs(neurites, neurite_type=NeuriteType.all):
'''Partition pairs at bifurcation points of a collection of neurites.
Partition pait is defined as the number of bifurcations at the two
daughters of the bifurcating section'''
return map(_bifurcationfunc.partition_pair,
iter_sections(neurites,
iterator_type=Tree.ibifurcation_point,
neurite_filter=is_type(neurite_type)))
开发者ID:BlueBrain,项目名称:NeuroM,代码行数:8,代码来源:_neuritefunc.py
示例4: section_radial_distances
def section_radial_distances(neurites, neurite_type=NeuriteType.all, origin=None):
"""Remote bifurcation angles in a collection of neurites"""
dist = []
for n in iter_neurites(neurites, filt=is_type(neurite_type)):
pos = n.root_node.points[0] if origin is None else origin
dist.extend([sectionfunc.section_radial_distance(s, pos) for s in n.iter_sections()])
return dist
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:8,代码来源:_neuritefunc.py
示例5: segment_lengths
def segment_lengths(neurites, neurite_type=NeuriteType.all):
"""Lengths of the segments in a collection of neurites"""
def _seg_len(sec):
"""list of segment lengths of a section"""
return np.linalg.norm(np.diff(sec.points[:, : COLS.R], axis=0), axis=1)
neurite_filter = is_type(neurite_type)
return [s for ss in iter_sections(neurites, neurite_filter=neurite_filter) for s in _seg_len(ss)]
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:9,代码来源:_neuritefunc.py
示例6: map_segments
def map_segments(func, neurites, neurite_type):
''' Map `func` to all the segments in a collection of neurites
`func` accepts a section and returns list of values corresponding to each segment.
'''
neurite_filter = is_type(neurite_type)
return [
s for ss in iter_sections(neurites, neurite_filter=neurite_filter) for s in func(ss)
]
开发者ID:BlueBrain,项目名称:NeuroM,代码行数:9,代码来源:_neuritefunc.py
示例7: principal_direction_extents
def principal_direction_extents(neurites, neurite_type=NeuriteType.all, direction=0):
'''Principal direction extent of neurites in neurons'''
def _pde(neurite):
'''Get the PDE of a single neurite'''
# Get the X, Y,Z coordinates of the points in each section
points = neurite.points[:, :3]
return mm.principal_direction_extent(points)[direction]
return map(_pde, iter_neurites(neurites, filt=is_type(neurite_type)))
开发者ID:eleftherioszisis,项目名称:NeuroM,代码行数:9,代码来源:_neuritefunc.py
示例8: segment_lengths
def segment_lengths(neurites, neurite_type=NeuriteType.all):
'''Lengths of the segments in a collection of neurites'''
def _seg_len(sec):
'''list of segment lengths of a section'''
vecs = np.diff(sec.points, axis=0)[:, :3]
return np.sqrt([np.dot(p, p) for p in vecs])
neurite_filter = is_type(neurite_type)
return [s for ss in iter_sections(neurites, neurite_filter=neurite_filter)
for s in _seg_len(ss)]
开发者ID:eleftherioszisis,项目名称:NeuroM,代码行数:10,代码来源:_neuritefunc.py
示例9: segment_radii
def segment_radii(neurites, neurite_type=NeuriteType.all):
"""arithmetic mean of the radii of the points in segments in a collection of neurites"""
def _seg_radii(sec):
"""vectorized mean radii"""
pts = sec.points[:, COLS.R]
return np.divide(np.add(pts[:-1], pts[1:]), 2.0)
neurite_filter = is_type(neurite_type)
return [s for ss in iter_sections(neurites, neurite_filter=neurite_filter) for s in _seg_radii(ss)]
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:10,代码来源:_neuritefunc.py
示例10: segment_midpoints
def segment_midpoints(neurites, neurite_type=NeuriteType.all):
"""Return a list of segment mid-points in a collection of neurites"""
def _seg_midpoint(sec):
"""Return the mid-points of segments in a section"""
pts = sec.points
return np.divide(np.add(pts[:-1], pts[1:])[:, :3], 2.0)
neurite_filter = is_type(neurite_type)
return [s for ss in iter_sections(neurites, neurite_filter=neurite_filter) for s in _seg_midpoint(ss)]
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:10,代码来源:_neuritefunc.py
示例11: section_radial_distances
def section_radial_distances(neurites, neurite_type=NeuriteType.all, origin=None,
iterator_type=Tree.ipreorder):
'''Section radial distances in a collection of neurites.
The iterator_type can be used to select only terminal sections (ileaf)
or only bifurcations (ibifurcation_point).'''
dist = []
for n in iter_neurites(neurites, filt=is_type(neurite_type)):
pos = n.root_node.points[0] if origin is None else origin
dist.extend(sectionfunc.section_radial_distance(s, pos)
for s in iter_sections(n,
iterator_type=iterator_type))
return dist
开发者ID:BlueBrain,项目名称:NeuroM,代码行数:12,代码来源:_neuritefunc.py
示例12: neurite_volume_density
def neurite_volume_density(neurites, neurite_type=NeuriteType.all):
"""Get the volume density per neurite
The volume density is defined as the ratio of the neurite volume and
the volume of the neurite's enclosung convex hull
"""
def vol_density(neurite):
"""volume density of a single neurite"""
return neurite.volume / convex_hull(neurite).volume
return list(vol_density(n) for n in iter_neurites(neurites, filt=is_type(neurite_type)))
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:12,代码来源:_neuritefunc.py
示例13: segment_radial_distances
def segment_radial_distances(neurites, neurite_type=NeuriteType.all, origin=None):
'''Lengths of the segments in a collection of neurites'''
def _seg_rd(sec, pos):
'''list of radial distances of all segments of a section'''
mid_pts = np.divide(np.add(sec.points[:-1], sec.points[1:])[:, :3], 2.0)
return np.sqrt([mm.point_dist2(p, pos) for p in mid_pts])
dist = []
for n in iter_neurites(neurites, filt=is_type(neurite_type)):
pos = n.root_node.points[0] if origin is None else origin
dist.extend([s for ss in n.iter_sections() for s in _seg_rd(ss, pos)])
return dist
开发者ID:eleftherioszisis,项目名称:NeuroM,代码行数:13,代码来源:_neuritefunc.py
示例14: segment_taper_rates
def segment_taper_rates(neurites, neurite_type=NeuriteType.all):
"""taper rates of the segments in a collection of neurites
The taper rate is defined as the absolute radii differences divided by length of the section
"""
def _seg_taper_rates(sec):
"""vectorized taper rates"""
pts = sec.points[:, : COLS.TYPE]
diff = np.diff(pts, axis=0)
distance = np.linalg.norm(diff[:, : COLS.R], axis=1)
return np.divide(2 * np.abs(diff[:, COLS.R]), distance)
neurite_filter = is_type(neurite_type)
return [s for ss in iter_sections(neurites, neurite_filter=neurite_filter) for s in _seg_taper_rates(ss)]
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:15,代码来源:_neuritefunc.py
示例15: section_path_lengths
def section_path_lengths(neurites, neurite_type=NeuriteType.all):
"""Path lengths of a collection of neurites """
# Calculates and stores the section lengths in one pass,
# then queries the lengths in the path length iterations.
# This avoids repeatedly calculating the lengths of the
# same sections.
dist = {}
neurite_filter = is_type(neurite_type)
for s in iter_sections(neurites, neurite_filter=neurite_filter):
dist[s] = s.length
def pl2(node):
"""Calculate the path length using cached section lengths"""
return sum(dist[n] for n in node.iupstream())
return map_sections(pl2, neurites, neurite_type=neurite_type)
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:17,代码来源:_neuritefunc.py
示例16: trunk_origin_azimuths
def trunk_origin_azimuths(nrn, neurite_type=NeuriteType.all):
'''Get a list of all the trunk origin azimuths of a neuron or population
The azimuth is defined as Angle between x-axis and the vector
defined by (initial tree point - soma center) on the x-z plane.
The range of the azimuth angle [-pi, pi] radians
'''
neurite_filter = is_type(neurite_type)
nrns = nrn.neurons if hasattr(nrn, 'neurons') else [nrn]
def _azimuth(section, soma):
'''Azimuth of a section'''
vector = mm.vector(section[0], soma.center)
return np.arctan2(vector[COLS.Z], vector[COLS.X])
return [_azimuth(s.root_node.points, n.soma)
for n in nrns for s in n.neurites if neurite_filter(s)]
开发者ID:eleftherioszisis,项目名称:NeuroM,代码行数:18,代码来源:_neuronfunc.py
示例17: n_neurites
def n_neurites(neurites, neurite_type=NeuriteType.all):
"""Number of neurites in a collection of neurites"""
return sum(1 for _ in iter_neurites(neurites, filt=is_type(neurite_type)))
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:3,代码来源:_neuritefunc.py
示例18: n_segments
def n_segments(neurites, neurite_type=NeuriteType.all):
"""Number of segments in a collection of neurites"""
return sum(len(s.points) - 1 for s in iter_sections(neurites, neurite_filter=is_type(neurite_type)))
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:3,代码来源:_neuritefunc.py
示例19: trunk_origin_radii
def trunk_origin_radii(nrn, neurite_type=NeuriteType.all):
'''radii of the trunk sections of neurites in a neuron'''
neurite_filter = is_type(neurite_type)
return [s.root_node.points[0][COLS.R] for s in nrn.neurites if neurite_filter(s)]
开发者ID:eleftherioszisis,项目名称:NeuroM,代码行数:4,代码来源:_neuronfunc.py
示例20: total_volume_per_neurite
def total_volume_per_neurite(neurites, neurite_type=NeuriteType.all):
"""Get the volume per neurite in a collection"""
return list(sum(s.volume for s in n.iter_sections()) for n in iter_neurites(neurites, filt=is_type(neurite_type)))
开发者ID:jdcourcol,项目名称:NeuroM,代码行数:3,代码来源:_neuritefunc.py
注:本文中的neurom.core.types.is_type函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论