Python myTools.pressTAB函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中myTools.pressTAB函数的典型用法代码示例。如果您正苦于以下问题：Python pressTAB函数的具体用法？Python pressTAB怎么用？Python pressTAB使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pressTAB函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: fProgressTotal_Setup1

def fProgressTotal_Setup1():
    # - - - - - - - - - - - - - - - - - - - - - - - - - #

    myTools.sectionStartTimeStamp("ba ProgressTot1")
    logging.debug("ba ProgressTot1")

    # open client
    type("i", KeyModifier.CTRL)
    time.sleep(1)
    type("BA-ProgressTot")
    type(Key.ENTER)
    time.sleep(1)

    # get to arrangement field for time
    ba__Common.fMoveto_BAPage()
    myTools.pressTAB(4)

    # switch to minimum
    type(Key.HOME)
    myTools.pressDOWN(11)
    # enter details
    type(Key.TAB)
    type(Key.ENTER)
    time.sleep(1)
    type("500")
    time.sleep(1)
    type(Key.ENTER)
    # save and close
    type("s", KeyModifier.CTRL)

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4, KEY_CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:35，代码来源:ba_ProgressTotal.py

示例2: fContingencyExp_Setup2

def fContingencyExp_Setup2(pBAClient):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp(pBAClient + "2")
    logging.debug(pBAClient + "2")

# open client
    myTools.openClient(pBAClient)

# get to arrangement field for exp
    ba__Common.fMoveto_BAPage()
    myTools.pressTAB(6)
    
# enter details    
    type(Key.ENTER)
    time.sleep(1)
    
#    if int(Settings.tsVersion) > 2014:
#        myTools.pressTAB(1)
#    else:
    myTools.pressTAB(2)
    
    type(Key.DOWN)
    
# save and close    
    type(Key.ENTER)
    type("s",KeyModifier.CTRL)
    
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4,KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:33，代码来源:ba_Contingency_Exp.py

示例3: fExport_ClientSettings

def fExport_ClientSettings():
    # ---------------------------------------------------#

    logging.debug("-- export client settings")
    click("export_btn.png")
    time.sleep(1)

    # move to Export To list
    myTools.pressTAB(1)

    # move to Nahant
    type("n")
    time.sleep(1)

    # move highlight to account for Timeslips weirdness
    type(Key.UP)
    type(Key.DOWN)
    time.sleep(1)

    # highlight and mark rest of clients
    type(Key.END, Key.SHIFT)
    type(Key.F4)
    time.sleep(1)

    # click Export, then Yes
    type(Key.TAB)
    type(Key.ENTER)
    time.sleep(1)
    type(Key.ENTER)

    myTools.waitForExportSuccess()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:31，代码来源:client_PayDistrib.py

示例4: fChange_ClientSettings

def fChange_ClientSettings():
#---------------------------------------------------#

    logging.debug('- Change_ClientSettings')
    myTools.getFocus()
    
    logging.debug('-- change a client')
    type("i",KeyModifier.CTRL)
    time.sleep(1)
    type(Key.ENTER)
    time.sleep(1)

    myTools.pressF6(4)
    if Settings.tsVersion > "2014":
        myTools.pressF6(3)       
    time.sleep(1)
    
    myTools.pressTAB(3)   
    time.sleep(1)
    type("my")

    logging.debug('-- save client')
    type("s",KeyModifier.CTRL)

    fExport_ClientSettings()
    fExport_TemplateSettings()

    time.sleep(1)
    type(Key.F4,KeyModifier.CTRL)
    type(Key.F4,KeyModifier.CTRL)

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:30，代码来源:taxes_Setup.py

示例5: setupCustomFilter

def setupCustomFilter():
#---------------------------------------------------#
    """ sets up custom filter Client List; only used by fPrint_PreBill_2 """

    logging.debug('- setupCustomFilter')

    wait("slip_trans_date.png",60)                
    time.sleep(1)                
    
    click("slip_trans_date.png")
    time.sleep(1)

    # switch to the client group
    myTools.pressSHIFTTAB(1)
    type("c")
    time.sleep(1)

    # choose Client List
    myTools.pressTAB(1)
    myTools.pressDOWN(7)
    click("add_filter.png")
    time.sleep(1)

    # mark All
    type(Key.INSERT)
    time.sleep(1)

    # remove Franklin
    myTools.pressDOWN(5)
    type(Key.F4,KeyModifier.SHIFT)

    # press OK
    myTools.pressTAB(1)
    type(Key.ENTER)
    time.sleep(1)

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:35，代码来源:report_PBWorksheet.py

示例6: fSort_InvoiceListFields

def fSort_InvoiceListFields():
#---------------------------------------------------#

    logging.debug('- fSort_InvoiceListFields')

    logging.debug('- open report list')
    type("r",KeyModifier.ALT)
    type("a")
    time.sleep(1)

    # open report
    type("udi")
    time.sleep(1)
    type("o",KeyModifier.CTRL)
    time.sleep(1)

    # add invoice number sort
    type(Key.F6)
    time.sleep(1)
    myTools.pressTAB(2)
    time.sleep(1)
    type(Key.SPACE)

    # close and save report
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1)
    type("y")
    time.sleep(1)
    type(Key.F4,KeyModifier.CTRL)

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:29，代码来源:report_UDInvoice.py

示例7: fChange_TaxRule

def fChange_TaxRule():
#---------------------------------------------------#
    logging.debug('- Change_TaxRule')

    logging.debug('-- open Taxes')
    type("p",KeyModifier.ALT)   
    type("t")
    time.sleep(2)

    logging.debug('-- open GA tax rule')
    type(Key.F6)
    type("g")
    type(Key.ENTER)
    time.sleep(1)

    logging.debug('-- change rate')
    myTools.pressTAB(3)
    type("7.25")
    type(Key.TAB)
    type(Key.END)
    time.sleep(1)

    logging.debug('-- change settings')
    type("s",KeyModifier.ALT)
    type("i",KeyModifier.ALT)
    type(Key.ENTER)
    click("done_btn.png")

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:27，代码来源:taxes_Setup.py

示例8: fImport_DefaultLayout

def fImport_DefaultLayout():
#---------------------------------------------------#

    fImport_Layout("Low Detail")

    logging.debug('- assign layout')
    type("a",KeyModifier.ALT)
    time.sleep(1)

    # shift tab to open/templates control
    myTools.pressSHIFTTAB(1)
    time.sleep(1)

    # press RIGHT to Template Clients
    myTools.pressRIGHT(1)
    time.sleep(1)

    # press TAB to client list
    myTools.pressTAB(1)
    time.sleep(1)

    #press F4 to mark template    
    type(Key.F4)
    time.sleep(1)

    # assign
    type("a",KeyModifier.ALT)
    type(Key.ENTER)
    time.sleep(1)

    # confirm and close
    type(Key.ENTER)
    time.sleep(1)
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1)

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:35，代码来源:ba__Common.py

示例9: fSetup_SplitBills

def fSetup_SplitBills():
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("setup split")
    logging.debug('- set up split bills')

    myTools.getFocus()

    # open split billing rule list
    type("b",KeyModifier.ALT)
    time.sleep(1)
    type("i")
    time.sleep(1)

    fSetup_Primary("Beverly")

    # new secondary
    myTools.pressTAB(7)   
    fSetup_Secondary("Peabody",15)
    fSetup_Secondary("Saugus",20)

    # done
    myTools.pressTAB(4)
    type(Key.SPACE)

    myTools.sectionEndTimeStamp()
    backup_Data.fBackup_Checkpoint("split")

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:27，代码来源:bill_Split.py

示例10: setup_BillTemplate

def setup_BillTemplate():
#---------------------------------------------------#

    logging.debug('- edit bill template')
    type("o",KeyModifier.CTRL)
    time.sleep(1)
    type("Invoice: [Invoice Number], Balance: [New Balance]")
    time.sleep(1)
    
    myTools.pressTAB(1)
    type("a",KeyModifier.CTRL)
    time.sleep(1)
    
    type("Timekeeper: [Custom Timekeeper]")
    type(Key.ENTER)
    type("List: [Custom List]")
    type(Key.ENTER)
    type("Previous: [Previous Balance]")
    type(Key.ENTER)
    type("Fees: [Actual Fees - ITD + New]")
    type(Key.ENTER)
    type("Aged: Period 1: [Aged Period 1]")
    time.sleep(1)
    
    myTools.pressTAB(1)
    type(Key.ENTER)
    time.sleep(1)

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:27，代码来源:email_Setup.py

示例11: fCreate_Categories

def fCreate_Categories():
    # ---------------------------------------------------#

    myTools.sectionStartTimeStamp("categories")

    logging.debug("fCreate_Categories")

    # make sure timeslips has focus
    myTools.getFocus()

    logging.debug("- open category list")
    type("p", KeyModifier.ALT)

    # hot keys changed for TS2014
    if int(Settings.tsVersion) < 2014:
        type("i")
    else:
        type("o")
    time.sleep(1)

    for category in ["Construction", "General", "Landscape", "Hardware", "Supplies", "Materials", "Other"]:
        logging.debug("-- create: " + category)
        type("n", KeyModifier.ALT)
        type(category)
        type(Key.ENTER)

    logging.debug("- close list")
    myTools.pressTAB(4)
    type(Key.ENTER)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:31，代码来源:settings_Categories.py

示例12: setup_StatementTemplate

def setup_StatementTemplate(pPeriod):
#---------------------------------------------------#

    logging.debug('- edit statement template: ' + pPeriod)

    type("Client: [Nickname 1] - Balance: [New Balance]")
    myTools.pressTAB(1)
    
    type("a",KeyModifier.CTRL)
    time.sleep(1)

    type("Period: " + pPeriod)
    type(Key.ENTER)    
    type("Timekeeper: [Custom Timekeeper]")
    type(Key.ENTER)
    type("List: [Custom List]")
    type(Key.ENTER)
    type("Previous: [Previous Balance]")
    type(Key.ENTER)
    type("Fees: [Actual Fees - ITD + New]")
    type(Key.ENTER)
    type("Aged: Period 1: [Aged Period 1]")
    type(Key.ENTER)    
    type("Oldest: [Oldest Balance Amount]")
    type(Key.ENTER)    
    type("Email: [Email Address]")
    time.sleep(1)

    if int(Settings.tsVersion) < 2015:
        myTools.pressTAB(1)
        type(Key.ENTER)
        time.sleep(1)

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:32，代码来源:email_Setup.py

示例13: setup_ReprintTemplates

def setup_ReprintTemplates():
#---------------------------------------------------#

    logging.debug('- edit reprint template')

    if int(Settings.tsVersion) < 2015:    
        type("3",KeyModifier.CTRL)  # use Ctrl+3 instead of F6; defect in ts2014
        type(Key.ENTER)
    else:
        type(Key.F6)
    time.sleep(1)
    
    type("Copy [Invoice Number] for [Invoice Balance]: [Invoice Status]")
    time.sleep(1)
    
    myTools.pressTAB(1)
    type("a",KeyModifier.CTRL)
    time.sleep(1)

    type("Timekeeper: [Custom Timekeeper]")
    type(Key.ENTER)
    type("Bill Date: [Bill Date]")
    type(Key.ENTER)
    type("New Charges: [New Charges]")
    type(Key.ENTER)
    type("InRefTo: [In Reference To]")
    type(Key.ENTER)
    type("Firm Name: [Firm Name]")
    time.sleep(1)    

    if int(Settings.tsVersion) < 2015:    
        myTools.pressTAB(1)
        type(Key.ENTER)
        time.sleep(1)

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:34，代码来源:email_Setup.py

示例14: fProgressTotal_Setup3

def fProgressTotal_Setup3():
    # - - - - - - - - - - - - - - - - - - - - - - - - - #

    myTools.sectionStartTimeStamp("ba ProgressTot3")
    logging.debug("ba ProgressTot3")

    # open client
    type("i", KeyModifier.CTRL)
    time.sleep(1)
    type("BA-ProgressTot")
    type(Key.ENTER)
    time.sleep(1)

    # get to arrangement field for time
    ba__Common.fMoveto_BAPage()
    myTools.pressTAB(5)

    # enter details
    type(Key.ENTER)
    time.sleep(1)
    type("700")
    time.sleep(1)

    type("u", KeyModifier.ALT)
    type(Key.END)
    type(Key.ENTER)

    # save and close
    type("s", KeyModifier.CTRL)

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4, KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:35，代码来源:ba_ProgressTotal.py

示例15: fPrecision_Setup

def fPrecision_Setup():
    # - - - - - - - - - - - - - - - - - - - - - - - - - #

    myTools.sectionStartTimeStamp("ba Precision")
    logging.debug("ba Precision")

    # open client
    type("i", KeyModifier.CTRL)
    time.sleep(1)
    type("BA-Precision")
    type(Key.ENTER)
    time.sleep(1)

    # get to Rounding field
    if int(Settings.tsVersion) < 2015:
        myTools.pressF6(4)
        time.sleep(1)
        myTools.pressTAB(8)
    else:
        myTools.pressF6(7)
        time.sleep(1)
        myTools.pressTAB(7)

    time.sleep(1)
    type(Key.UP)

    # save and close
    type("s", KeyModifier.CTRL)

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4, KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:34，代码来源:ba_Precision.py

示例16: fChoose_CSV_Print

def fChoose_CSV_Print(pReportName):
#---------------------------------------------------#

    logging.debug('- fChoose_CSV_Print')

    # choose CSV
    myTools.pressSHIFTTAB(2)
    time.sleep(1)
    type("c")
    time.sleep(1)

    # print the report
    type(Key.ENTER)    
    time.sleep(1)

    # fill in path and name; press ENTER    
    type(Settings.repFolder + "\\" + pReportName)
    time.sleep(1)

    # export titles
    myTools.pressTAB(2)
    time.sleep(1)
    type(Key.SPACE)    
    time.sleep(1)

    # OK
    type(Key.ENTER)

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:27，代码来源:report_UDSlip.py

示例17: fSort_FundsListFields

def fSort_FundsListFields():
#---------------------------------------------------#

    logging.debug('- fSort_FundsListFields')

    logging.debug('- open report list')
    type("r",KeyModifier.ALT)
    type("f")
    time.sleep(1)

    # open report
    type("udf")
    time.sleep(1)
    type("o",KeyModifier.CTRL)
    time.sleep(1)

    # add funds id sort
    type(Key.F6)
    time.sleep(1)
    myTools.pressTAB(2)
    time.sleep(1)
    type(Key.SPACE)

    # close and save report
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1)
    type("y")
    time.sleep(1)
    type(Key.F4,KeyModifier.CTRL)

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:29，代码来源:report_UDFunds.py

示例18: fSetup_InvoiceListing

def fSetup_InvoiceListing():
    # ---------------------------------------------------#

    logging.debug("- set up invlist")

    myTools.getFocus()
    type("r", KeyModifier.ALT)
    type("a")
    time.sleep(1)
    type("i")
    time.sleep(1)

    myTools.removeDateAndTime()

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type("y")
    time.sleep(1)

    # open report
    type("o", KeyModifier.CTRL)
    # add invoice number sort
    type(Key.F6)
    time.sleep(1)
    myTools.pressTAB(2)
    time.sleep(1)
    type(Key.SPACE)

    # close and save report
    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type("y")
    time.sleep(1)
    type(Key.F4, KeyModifier.CTRL)

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:34，代码来源:report_InvoiceListing.py

示例19: setupReport

def setupReport():
#---------------------------------------------------#

    # open report
    type("o",KeyModifier.CTRL)
    time.sleep(1)

    logging.debug('- default options')
    # options button
    myTools.pressSHIFTTAB(4)
    type(Key.ENTER)
    time.sleep(1)
    
    # default button   
    myTools.pressSHIFTTAB(4)
    type(Key.ENTER)
    time.sleep(1)

    # close dialog
    myTools.pressTAB(1)
    type(Key.ENTER)
    time.sleep(1)   

    logging.debug('- print report')

    # move to Print To and choose CSV
    myTools.pressTAB(2)
    type("c")
    time.sleep(1)

    # print the report
    type(Key.ENTER)    
    time.sleep(1)

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:33，代码来源:report_Budgets.py

示例20: fSetup_BABills

def fSetup_BABills():
    # ---------------------------------------------------#
    """
    set up bills to print to text; no column stops
    """

    logging.debug("- set up bill report")

    type("b", KeyModifier.CTRL)
    time.sleep(1)

    # Print to text
    myTools.pressTAB(6)
    type("t")

    # Save AS
    myTools.pressTAB(2)
    type(Key.ENTER)

    # no column stops
    type("u", KeyModifier.ALT)
    time.sleep(1)
    type(Key.ENTER)

    if exists("replace_msg.png"):
        type(Key.ENTER)

    # SAVE and Close
    type("s", KeyModifier.CTRL)
    type(Key.ENTER)
    type(Key.F4, KeyModifier.CTRL)

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:31，代码来源:ba__Common.py

注：本文中的myTools.pressTAB函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python myTools.sectionEndTimeStamp函数代码示例发布时间：2022-05-27

Python myTools.pressSHIFTTAB函数代码示例发布时间：2022-05-27

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13936|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10292|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4170|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4064|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3889|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3539|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3067|2022-01-22

8 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2726|2022-01-22

9 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2682|2022-05-25

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2346|2022-01-22

客服电话

电子邮件

Python myTools.pressTAB函数代码示例

示例1: fProgressTotal_Setup1

示例2: fContingencyExp_Setup2

示例3: fExport_ClientSettings

示例4: fChange_ClientSettings

示例5: setupCustomFilter

示例6: fSort_InvoiceListFields

示例7: fChange_TaxRule

示例8: fImport_DefaultLayout

示例9: fSetup_SplitBills

示例10: setup_BillTemplate

示例11: fCreate_Categories

示例12: setup_StatementTemplate

示例13: setup_ReprintTemplates

示例14: fProgressTotal_Setup3

示例15: fPrecision_Setup

示例16: fChoose_CSV_Print

示例17: fSort_FundsListFields

示例18: fSetup_InvoiceListing

示例19: setupReport

示例20: fSetup_BABills

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053