Python mosq_test.packet_matches函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中mosq_test.packet_matches函数的典型用法代码示例。如果您正苦于以下问题：Python packet_matches函数的具体用法？Python packet_matches怎么用？Python packet_matches使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了packet_matches函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: dict

client_args = sys.argv[1:]
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = '../../lib:../../lib/cpp'
try:
    pp = env['PYTHONPATH']
except KeyError:
    pp = ''
env['PYTHONPATH'] = '../../lib/python:'+pp
client = subprocess.Popen(client_args, env=env)

try:
    (conn, address) = sock.accept()
    conn.settimeout(10)
    connect_recvd = conn.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        conn.send(connack_packet)
        subscribe_recvd = conn.recv(len(subscribe_packet))

        if mosq_test.packet_matches("subscribe", subscribe_recvd, subscribe_packet):
            conn.send(suback_packet)
            disconnect_recvd = conn.recv(len(disconnect_packet))
        
            if mosq_test.packet_matches("disconnect", disconnect_recvd, disconnect_packet):
                rc = 0
        
    conn.close()
finally:
    client.terminate()
    client.wait()
    sock.close()

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:31，代码来源:02-subscribe-qos2.py

示例2: print

rc = 1
keepalive = 10
connect_packet = mosq_test.gen_connect("connect-uname-pwd-test", keepalive=keepalive, username="test-username", password="cnwTICONIURW")
connack_packet = mosq_test.gen_connack(rc=0)

broker = subprocess.Popen(['../../src/mosquitto', '-c', '09-plugin-auth-unpwd-success.conf'], stderr=subprocess.PIPE)

try:
    time.sleep(0.5)

    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    sock.settimeout(10)
    sock.connect(("localhost", 1888))
    sock.send(connect_packet)
    connack_recvd = sock.recv(len(connack_packet))
    sock.close()

    if mosq_test.packet_matches("connack", connack_recvd, connack_packet):
        rc = 0
finally:
    broker.terminate()
    broker.wait()
    if rc:
        (stdo, stde) = broker.communicate()
        print(stde)


exit(rc)

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:28，代码来源:09-plugin-auth-unpwd-success.py

示例3:

suback_packet = mosq_test.gen_suback(mid, 0)

publish_packet = mosq_test.gen_publish("will/qos0/test", qos=0, payload=struct.pack("!4sB7s", "will", 0, "message"))

broker = subprocess.Popen(['../../src/mosquitto', '-p', '1888'], stderr=subprocess.PIPE)

try:
    time.sleep(0.5)

    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    sock.settimeout(30)
    sock.connect(("localhost", 1888))
    sock.send(connect_packet)
    connack_recvd = sock.recv(len(connack_packet))

    if mosq_test.packet_matches("connack", connack_recvd, connack_packet):
        sock.send(subscribe_packet)
        suback_recvd = sock.recv(len(suback_packet))

        if mosq_test.packet_matches("suback", suback_recvd, suback_packet):
            will = subprocess.Popen(['./07-will-null-helper.py'])
            will.wait()

            publish_recvd = sock.recv(len(publish_packet))

            if mosq_test.packet_matches("publish", publish_recvd, publish_packet):
                rc = 0

    sock.close()
finally:
    broker.terminate()

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:31，代码来源:07-will-null.py

示例4: dict

client_args = sys.argv[1:]
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = '../../lib:../../lib/cpp'
try:
    pp = env['PYTHONPATH']
except KeyError:
    pp = ''
env['PYTHONPATH'] = '../../lib/python:'+pp
client = subprocess.Popen(client_args, env=env)

try:
    (conn, address) = sock.accept()
    conn.settimeout(keepalive+10)
    connect_recvd = conn.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        conn.send(connack_packet)
        pingreq_recvd = conn.recv(len(pingreq_packet))

        if mosq_test.packet_matches("pingreq", pingreq_recvd, pingreq_packet):
            rc = 0

    conn.close()
finally:
    client.terminate()
    client.wait()
    sock.close()

exit(rc)

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:29，代码来源:01-keepalive-pingreq.py

示例5:

ssock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
ssock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
ssock.settimeout(40)
ssock.bind(('', 1888))
ssock.listen(5)

broker = subprocess.Popen(['../../src/mosquitto', '-c', '06-bridge-b2br-disconnect-qos2.conf'], stderr=subprocess.PIPE)

try:
    time.sleep(0.5)

    (bridge, address) = ssock.accept()
    bridge.settimeout(10)
    connect_recvd = bridge.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        bridge.send(connack_packet)
        subscribe_recvd = bridge.recv(len(subscribe_packet))
        if mosq_test.packet_matches("subscribe", subscribe_recvd, subscribe_packet):
            bridge.send(suback_packet)

            bridge.send(publish_packet)
            bridge.close()

            (bridge, address) = ssock.accept()
            bridge.settimeout(10)
            connect_recvd = bridge.recv(len(connect_packet))

            if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
                bridge.send(connack_packet)
                subscribe_recvd = bridge.recv(len(subscribe2_packet))

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:31，代码来源:06-bridge-b2br-disconnect-qos2.py

示例6: dict

client_args = sys.argv[1:]
env = dict(os.environ)
env["LD_LIBRARY_PATH"] = "../../lib:../../lib/cpp"
try:
    pp = env["PYTHONPATH"]
except KeyError:
    pp = ""
env["PYTHONPATH"] = "../../lib/python:" + pp
client = subprocess.Popen(client_args, env=env)

try:
    (conn, address) = sock.accept()
    conn.settimeout(10)
    connect_recvd = conn.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        conn.send(connack_packet)
        publish_recvd = conn.recv(len(publish_packet))

        if mosq_test.packet_matches("publish", publish_recvd, publish_packet):
            disconnect_recvd = conn.recv(len(disconnect_packet))

            if mosq_test.packet_matches("disconnect", disconnect_recvd, disconnect_packet):
                rc = 0

    conn.close()
finally:
    client.terminate()
    client.wait()
    sock.close()

开发者ID:karthikbnd，项目名称:BBB-codes，代码行数:30，代码来源:03-publish-qos0.py

示例7:

keepalive = 60
connect_packet = mosq_test.gen_connect("test-helper", keepalive=keepalive)
connack_packet = mosq_test.gen_connack(rc=0)

mid = 312
publish_packet = mosq_test.gen_publish("qos2/timeout/test", qos=2, mid=mid, payload="timeout-message")
pubrec_packet = mosq_test.gen_pubrec(mid)
pubrel_packet = mosq_test.gen_pubrel(mid)
pubcomp_packet = mosq_test.gen_pubcomp(mid)

sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sock.connect(("localhost", 1888))
sock.send(connect_packet)
connack_recvd = sock.recv(len(connack_packet))

if mosq_test.packet_matches("helper connack", connack_recvd, connack_packet):
    sock.send(publish_packet)
    pubrec_recvd = sock.recv(len(pubrec_packet))

    if mosq_test.packet_matches("helper pubrec", pubrec_recvd, pubrec_packet):
        sock.send(pubrel_packet)
        pubcomp_recvd = sock.recv(len(pubcomp_packet))

        if mosq_test.packet_matches("helper pubcomp", pubcomp_recvd, pubcomp_packet):
            rc = 0

sock.close()

exit(rc)

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:29，代码来源:03-publish-b2c-timeout-qos2-helper.py

示例8:

if cmd_subfolder not in sys.path:
    sys.path.insert(0, cmd_subfolder)

import mosq_test

rc = 1
keepalive = 60
connect_packet = mosq_test.gen_connect("test-helper", keepalive=keepalive)
connack_packet = mosq_test.gen_connack(rc=0)

mid = 128
publish_packet = mosq_test.gen_publish("bridge/disconnect/test", qos=1, mid=mid, payload="disconnect-message")
puback_packet = mosq_test.gen_puback(mid)

sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sock.connect(("localhost", 1889))
sock.send(connect_packet)
connack_recvd = sock.recv(len(connack_packet))

if mosq_test.packet_matches("helper connack", connack_recvd, connack_packet):
    sock.send(publish_packet)
    puback_recvd = sock.recv(len(puback_packet))

    if mosq_test.packet_matches("helper puback", puback_recvd, puback_packet):
        rc = 0

sock.close()
    
exit(rc)

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:29，代码来源:06-bridge-br2b-disconnect-qos1-helper.py

示例9: dict

sock.settimeout(10)
sock.bind(('', 1888))
sock.listen(5)

client_args = sys.argv[1:]
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = '../../lib:../../lib/cpp'
try:
    pp = env['PYTHONPATH']
except KeyError:
    pp = ''
env['PYTHONPATH'] = '../../lib/python:'+pp
client = subprocess.Popen(client_args, env=env)

try:
    (conn, address) = sock.accept()
    conn.settimeout(10)
    connect_recvd = conn.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        rc = 0

    conn.close()
finally:
    client.terminate()
    client.wait()
    sock.close()

exit(rc)

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:29，代码来源:01-unpwd-set.py

示例10:

ssock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
ssock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
ssock.settimeout(40)
ssock.bind(('', 1888))
ssock.listen(5)

broker = subprocess.Popen(['../../src/mosquitto', '-c', '06-bridge-b2br-disconnect-qos1.conf'], stderr=subprocess.PIPE)

try:
    time.sleep(0.5)

    (bridge, address) = ssock.accept()
    bridge.settimeout(10)
    connect_recvd = bridge.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        bridge.send(connack_packet)
        subscribe_recvd = bridge.recv(len(subscribe_packet))
        if mosq_test.packet_matches("subscribe", subscribe_recvd, subscribe_packet):
            bridge.send(suback_packet)

            bridge.send(publish_packet)
            # Bridge doesn't have time to respond but should expect us to retry
            # and so remove PUBACK.
            bridge.close()

            (bridge, address) = ssock.accept()
            bridge.settimeout(10)
            connect_recvd = bridge.recv(len(connect_packet))

            if mosq_test.packet_matches("connect", connect_recvd, connect_packet):

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:31，代码来源:06-bridge-b2br-disconnect-qos1.py

示例11: exit

ssock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
ssock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
ssock.settimeout(40)
ssock.bind(('', 1888))
ssock.listen(5)

broker = subprocess.Popen(['../../src/mosquitto', '-c', '06-bridge-br2b-disconnect-qos2.conf'], stderr=subprocess.PIPE)

try:
    time.sleep(0.5)

    (bridge, address) = ssock.accept()
    bridge.settimeout(10)
    connect_recvd = bridge.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        bridge.send(connack_packet)
        subscribe_recvd = bridge.recv(len(subscribe_packet))
        if mosq_test.packet_matches("subscribe", subscribe_recvd, subscribe_packet):
            bridge.send(suback_packet)

            pub = subprocess.Popen(['./06-bridge-br2b-disconnect-qos2-helper.py'])
            if pub.wait():
                exit(1)

            publish_recvd = bridge.recv(len(publish_packet))
            if mosq_test.packet_matches("publish", publish_recvd, publish_packet):
                bridge.close()

                (bridge, address) = ssock.accept()
                bridge.settimeout(10)

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:31，代码来源:06-bridge-br2b-disconnect-qos2.py

示例12: dict

client_args = sys.argv[1:]
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = '../../lib:../../lib/cpp'
try:
    pp = env['PYTHONPATH']
except KeyError:
    pp = ''
env['PYTHONPATH'] = '../../lib/python:'+pp
client = subprocess.Popen(client_args, env=env)

try:
    (conn, address) = sock.accept()
    conn.settimeout(10)
    connect_recvd = conn.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        conn.send(connack_packet)
        conn.send(publish_packet)
        pubrec_recvd = conn.recv(len(pubrec_packet))

        if mosq_test.packet_matches("pubrec", pubrec_recvd, pubrec_packet):
            # Should be repeated due to timeout
            pubrec_recvd = conn.recv(len(pubrec_packet))
            if mosq_test.packet_matches("pubrec", pubrec_recvd, pubrec_packet):
                conn.send(pubrel_packet)
                pubcomp_recvd = conn.recv(len(pubcomp_packet))
                if mosq_test.packet_matches("pubcomp", pubcomp_recvd, pubcomp_packet):
                    rc = 0

    conn.close()
finally:

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:31，代码来源:03-publish-b2c-qos2.py

示例13: pattern_test

def pattern_test(sub_topic, pub_topic):
    rc = 1
    keepalive = 60
    connect_packet = mosq_test.gen_connect("pattern-sub-test", keepalive=keepalive)
    connack_packet = mosq_test.gen_connack(rc=0)

    publish_packet = mosq_test.gen_publish(pub_topic, qos=0, payload="message")
    publish_retained_packet = mosq_test.gen_publish(pub_topic, qos=0, retain=True, payload="message")

    mid = 312
    subscribe_packet = mosq_test.gen_subscribe(mid, sub_topic, 0)
    suback_packet = mosq_test.gen_suback(mid, 0)

    mid = 234;
    unsubscribe_packet = mosq_test.gen_unsubscribe(mid, sub_topic)
    unsuback_packet = mosq_test.gen_unsuback(mid)

    broker = subprocess.Popen(['../../src/mosquitto', '-p', '1888'], stderr=subprocess.PIPE)

    try:
        time.sleep(0.5)

        sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        sock.connect(("localhost", 1888))
        sock.settimeout(5)
        sock.send(connect_packet)
        connack_recvd = sock.recv(len(connack_packet))

        if mosq_test.packet_matches("connack", connack_recvd, connack_packet):
            sock.send(subscribe_packet)
            suback_recvd = sock.recv(len(suback_packet))

            if mosq_test.packet_matches("suback", suback_recvd, suback_packet):
                pub = subprocess.Popen(['./03-pattern-matching-helper.py', pub_topic])
                pub.wait()

                publish_recvd = sock.recv(len(publish_packet))

                if mosq_test.packet_matches("publish", publish_recvd, publish_packet):
                    sock.send(unsubscribe_packet)
                    unsuback_recvd = sock.recv(len(unsuback_packet))

                    if mosq_test.packet_matches("unsuback", unsuback_recvd, unsuback_packet):
                        sock.send(subscribe_packet)
                        suback_recvd = sock.recv(len(suback_packet))

                        if mosq_test.packet_matches("suback", suback_recvd, suback_packet):
                            publish_retained_recvd = sock.recv(len(publish_retained_packet))

                            if mosq_test.packet_matches("publish retained", publish_retained_recvd, publish_retained_packet):
                                rc = 0

        sock.close()
    finally:
        broker.terminate()
        broker.wait()
        if rc:
            (stdo, stde) = broker.communicate()
            print(stde)

    return rc

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:61，代码来源:03-pattern-matching.py

示例14: dict

client_args = sys.argv[1:]
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = '../../lib:../../lib/cpp'
try:
    pp = env['PYTHONPATH']
except KeyError:
    pp = ''
env['PYTHONPATH'] = '../../lib/python:'+pp
client = subprocess.Popen(client_args, env=env)

try:
    (conn, address) = sock.accept()
    conn.settimeout(10)
    connect_recvd = conn.recv(len(connect_packet))

    if mosq_test.packet_matches("connect", connect_recvd, connect_packet):
        conn.send(connack_packet)
        conn.send(publish_packet)
        puback_recvd = conn.recv(len(puback_packet))

        if mosq_test.packet_matches("puback", puback_recvd, puback_packet):
            rc = 0

    conn.close()
finally:
    for i in range(0, 5):
        if client.returncode != None:
            break
        time.sleep(0.1)

    client.terminate()

开发者ID:Marina1704，项目名称:FotbalRobotic，代码行数:31，代码来源:03-publish-b2c-qos1.py

示例15:

pubrec_packet2 = mosq_test.gen_pubrec(mid)
pubrel_packet2 = mosq_test.gen_pubrel(mid)
pubcomp_packet2 = mosq_test.gen_pubcomp(mid)

broker = subprocess.Popen(["../../src/mosquitto", "-p", "1888"], stderr=subprocess.PIPE)

try:
    time.sleep(0.5)

    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    sock.settimeout(10)
    sock.connect(("localhost", 1888))
    sock.send(connect_packet)
    connack_recvd = sock.recv(len(connack_packet))

    if mosq_test.packet_matches("connack", connack_recvd, connack_packet):
        sock.send(subscribe_packet)
        suback_recvd = sock.recv(len(suback_packet))

        if mosq_test.packet_matches("suback", suback_recvd, suback_packet):
            sock.send(publish_packet)
            pubrec_recvd = sock.recv(len(pubrec_packet))

            if mosq_test.packet_matches("pubrec", pubrec_recvd, pubrec_packet):
                sock.send(pubrel_packet)
                pubcomp_recvd = sock.recv(len(pubcomp_packet))

                if mosq_test.packet_matches("pubcomp", pubcomp_recvd, pubcomp_packet):
                    publish_recvd = sock.recv(len(publish_packet2))

                    if mosq_test.packet_matches("publish2", publish_recvd, publish_packet2):

开发者ID:karthikbnd，项目名称:BBB-codes，代码行数:31，代码来源:02-subpub-qos2.py

注：本文中的mosq_test.packet_matches函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python mosq_test.start_broker函数代码示例发布时间：2022-05-27

Python mosq_test.get_port函数代码示例发布时间：2022-05-27

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13931|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10292|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4169|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4064|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3889|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3539|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3067|2022-01-22

8 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2726|2022-01-22

9 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2682|2022-05-25

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2346|2022-01-22

客服电话

电子邮件

Python mosq_test.packet_matches函数代码示例

示例1: dict

示例2: print

示例3:

示例4: dict

示例5:

示例6: dict

示例7:

示例8:

示例9: dict

示例10:

示例11: exit

示例12: dict

示例13: pattern_test

示例14: dict

示例15:

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053