本文整理汇总了Python中mosq_test.do_client_connect函数的典型用法代码示例。如果您正苦于以下问题:Python do_client_connect函数的具体用法?Python do_client_connect怎么用?Python do_client_connect使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了do_client_connect函数的14个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: test
def test():
sock = mosq_test.do_client_connect(connect_packet, connack_packet, port=port)
mosq_test.do_send_receive(sock, subscribe1_packet, suback1_packet, "suback 1")
mosq_test.do_send_receive(sock, subscribe2_packet, suback2_packet, "suback 2")
mosq_test.do_send_receive(sock, unsubscribe1_packet, unsuback1_packet, "unsuback")
sock.send(disconnect_packet)
sock.close()
开发者ID:physycom,项目名称:mosquitto,代码行数:8,代码来源:02-subhier-crash.py
示例2: pattern_test
def pattern_test(sub_topic, pub_topic):
rc = 1
keepalive = 60
connect_packet = mosq_test.gen_connect("pattern-sub-test", keepalive=keepalive)
connack_packet = mosq_test.gen_connack(rc=0)
publish_packet = mosq_test.gen_publish(pub_topic, qos=0, payload="message")
publish_retained_packet = mosq_test.gen_publish(pub_topic, qos=0, retain=True, payload="message")
mid = 312
subscribe_packet = mosq_test.gen_subscribe(mid, sub_topic, 0)
suback_packet = mosq_test.gen_suback(mid, 0)
mid = 234;
unsubscribe_packet = mosq_test.gen_unsubscribe(mid, sub_topic)
unsuback_packet = mosq_test.gen_unsuback(mid)
port = mosq_test.get_port()
broker = subprocess.Popen(['../../src/mosquitto', '-p', str(port)], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
try:
time.sleep(0.5)
sock = mosq_test.do_client_connect(connect_packet, connack_packet, timeout=20, port=port)
sock.send(subscribe_packet)
if mosq_test.expect_packet(sock, "suback", suback_packet):
pub = subprocess.Popen(['./03-pattern-matching-helper.py', pub_topic, str(port)], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
pub.wait()
(stdo, stde) = pub.communicate()
if mosq_test.expect_packet(sock, "publish", publish_packet):
sock.send(unsubscribe_packet)
if mosq_test.expect_packet(sock, "unsuback", unsuback_packet):
sock.send(subscribe_packet)
if mosq_test.expect_packet(sock, "suback", suback_packet):
if mosq_test.expect_packet(sock, "publish retained", publish_retained_packet):
rc = 0
sock.close()
finally:
broker.terminate()
broker.wait()
(stdo, stde) = broker.communicate()
if rc:
print(stde)
print(stdo)
raise
return rc
开发者ID:PierreF,项目名称:mosquitto,代码行数:52,代码来源:03-pattern-matching.py
示例3:
publish_packet = mosq_test.gen_publish("retain/clear/test", qos=0, payload="retained message", retain=True)
retain_clear_packet = mosq_test.gen_publish("retain/clear/test", qos=0, payload=None, retain=True)
mid_sub = 592
subscribe_packet = mosq_test.gen_subscribe(mid_sub, "retain/clear/test", 0)
suback_packet = mosq_test.gen_suback(mid_sub, 0)
mid_unsub = 593
unsubscribe_packet = mosq_test.gen_unsubscribe(mid_unsub, "retain/clear/test")
unsuback_packet = mosq_test.gen_unsuback(mid_unsub)
cmd = ['../../src/mosquitto', '-p', '1888']
broker = mosq_test.start_broker(filename=os.path.basename(__file__), cmd=cmd)
try:
sock = mosq_test.do_client_connect(connect_packet, connack_packet, timeout=4)
# Send retained message
sock.send(publish_packet)
# Subscribe to topic, we should get the retained message back.
sock.send(subscribe_packet)
if mosq_test.expect_packet(sock, "suback", suback_packet):
if mosq_test.expect_packet(sock, "publish", publish_packet):
# Now unsubscribe from the topic before we clear the retained
# message.
sock.send(unsubscribe_packet)
if mosq_test.expect_packet(sock, "unsuback", unsuback_packet):
# Now clear the retained message.
sock.send(retain_clear_packet)
开发者ID:AddictXQ,项目名称:mosquitto,代码行数:29,代码来源:04-retain-qos0-clear.py
示例4: print
import time
import inspect, os, sys
# From http://stackoverflow.com/questions/279237/python-import-a-module-from-a-folder
cmd_subfolder = os.path.realpath(os.path.abspath(os.path.join(os.path.split(inspect.getfile( inspect.currentframe() ))[0],"..")))
if cmd_subfolder not in sys.path:
sys.path.insert(0, cmd_subfolder)
import mosq_test
rc = 1
keepalive = 10
connect_packet = mosq_test.gen_connect(None, keepalive=keepalive)
broker = subprocess.Popen(['../../src/mosquitto', '-p', '1888'], stderr=subprocess.PIPE)
try:
time.sleep(0.5)
sock = mosq_test.do_client_connect(connect_packet, "")
sock.close()
rc = 0
finally:
broker.terminate()
broker.wait()
if rc:
(stdo, stde) = broker.communicate()
print(stde)
exit(rc)
开发者ID:Allanceng,项目名称:mosquitto-new,代码行数:30,代码来源:01-connect-invalid-id-missing.py
示例5:
mid = 1
publish_packet = mosq_test.gen_publish("qos2/disconnect/test", qos=2, mid=mid, payload="disconnect-message")
publish_dup_packet = mosq_test.gen_publish("qos2/disconnect/test", qos=2, mid=mid, payload="disconnect-message", dup=True)
pubrec_packet = mosq_test.gen_pubrec(mid)
pubrel_packet = mosq_test.gen_pubrel(mid)
pubrel_dup_packet = mosq_test.gen_pubrel(mid, dup=True)
pubcomp_packet = mosq_test.gen_pubcomp(mid)
mid = 3266
publish2_packet = mosq_test.gen_publish("qos1/outgoing", qos=1, mid=mid, payload="outgoing-message")
puback2_packet = mosq_test.gen_puback(mid)
broker = mosq_test.start_broker(filename=os.path.basename(__file__))
try:
sock = mosq_test.do_client_connect(connect_packet, connack_packet)
sock.send(publish_packet)
if mosq_test.expect_packet(sock, "pubrec", pubrec_packet):
# We're now going to disconnect and pretend we didn't receive the pubrec.
sock.close()
sock = mosq_test.do_client_connect(connect_packet, connack_packet)
sock.send(publish_dup_packet)
if mosq_test.expect_packet(sock, "pubrec", pubrec_packet):
sock.send(pubrel_packet)
if mosq_test.expect_packet(sock, "pubcomp", pubcomp_packet):
# Again, pretend we didn't receive this pubcomp
sock.close()
开发者ID:120991021,项目名称:mosquitto,代码行数:31,代码来源:03-publish-c2b-disconnect-qos2.py
示例6: int
#!/usr/bin/env python
import inspect, os, sys
# From http://stackoverflow.com/questions/279237/python-import-a-module-from-a-folder
cmd_subfolder = os.path.realpath(os.path.abspath(os.path.join(os.path.split(inspect.getfile( inspect.currentframe() ))[0],"..")))
if cmd_subfolder not in sys.path:
sys.path.insert(0, cmd_subfolder)
import mosq_test
port = int(sys.argv[2])
rc = 1
keepalive = 60
connect_packet = mosq_test.gen_connect("test-helper", keepalive=keepalive)
connack_packet = mosq_test.gen_connack(rc=0)
publish_packet = mosq_test.gen_publish(sys.argv[1], qos=0, retain=True, payload="message")
sock = mosq_test.do_client_connect(connect_packet, connack_packet, connack_error="helper connack", port=port)
sock.send(publish_packet)
rc = 0
sock.close()
exit(rc)
开发者ID:PierreF,项目名称:mosquitto,代码行数:25,代码来源:03-pattern-matching-helper.py
示例7: str
connect_packet = mosq_test.gen_connect("no-psk-test-client", keepalive=keepalive)
connack_packet = mosq_test.gen_connack(rc=0)
mid = 1
subscribe_packet = mosq_test.gen_subscribe(mid, "psk/test", 0)
suback_packet = mosq_test.gen_suback(mid, 0)
publish_packet = mosq_test.gen_publish(topic="psk/test", payload="message", qos=0)
bridge_cmd = ['../../src/mosquitto', '-c', '08-tls-psk-bridge.conf2']
broker = mosq_test.start_broker(filename=os.path.basename(__file__), use_conf=True, port=port1)
bridge = mosq_test.start_broker(filename=os.path.basename(__file__)+'_bridge', cmd=bridge_cmd, port=port3)
pub = None
try:
sock = mosq_test.do_client_connect(connect_packet, connack_packet, timeout=30, port=port1)
sock.send(subscribe_packet)
if mosq_test.expect_packet(sock, "suback", suback_packet):
pub = subprocess.Popen(['./c/08-tls-psk-bridge.test', str(port3)], env=env, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
if pub.wait():
raise ValueError
(stdo, stde) = pub.communicate()
if mosq_test.expect_packet(sock, "publish", publish_packet):
rc = 0
sock.close()
finally:
os.remove(conf_file1)
os.remove(conf_file2)
time.sleep(1)
开发者ID:PierreF,项目名称:mosquitto,代码行数:31,代码来源:08-tls-psk-bridge.py
示例8: str
subscribe_packet = mosq_test.gen_subscribe(mid, "qos1/disconnect/test", 1)
suback_packet = mosq_test.gen_suback(mid, 1)
mid = 1
publish_packet = mosq_test.gen_publish("qos1/disconnect/test", qos=1, mid=mid, payload="disconnect-message")
publish_dup_packet = mosq_test.gen_publish("qos1/disconnect/test", qos=1, mid=mid, payload="disconnect-message", dup=True)
puback_packet = mosq_test.gen_puback(mid)
mid = 3266
publish2_packet = mosq_test.gen_publish("qos1/outgoing", qos=1, mid=mid, payload="outgoing-message")
puback2_packet = mosq_test.gen_puback(mid)
broker = mosq_test.start_broker(filename=os.path.basename(__file__), port=port)
try:
sock = mosq_test.do_client_connect(connect_packet, connack1_packet, port=port)
mosq_test.do_send_receive(sock, subscribe_packet, suback_packet, "suback")
pub = subprocess.Popen(['./03-publish-b2c-disconnect-qos1-helper.py', str(port)], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
pub.wait()
(stdo, stde) = pub.communicate()
# Should have now received a publish command
if mosq_test.expect_packet(sock, "publish", publish_packet):
# Send our outgoing message. When we disconnect the broker
# should get rid of it and assume we're going to retry.
sock.send(publish2_packet)
sock.close()
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
开发者ID:physycom,项目名称:mosquitto,代码行数:31,代码来源:03-publish-b2c-disconnect-qos1.py
示例9: len
mid = 1
publish1s_packet = mosq_test.gen_publish("subpub/qos1", qos=1, mid=mid, payload="message")
puback1s_packet = mosq_test.gen_puback(mid)
mid = 1
publish1r_packet = mosq_test.gen_publish("subpub/qos1", qos=1, mid=mid, payload="message")
pubrec1r_packet = mosq_test.gen_pubrec(mid)
pingreq_packet = mosq_test.gen_pingreq()
pingresp_packet = mosq_test.gen_pingresp()
port = mosq_test.get_port()
broker = mosq_test.start_broker(filename=os.path.basename(__file__), port=port)
try:
sock = mosq_test.do_client_connect(connect_packet, connack_packet, timeout=20, port=port)
mosq_test.do_send_receive(sock, subscribe_packet, suback_packet, "suback")
helper = mosq_test.do_client_connect(helper_connect, helper_connack, timeout=20, port=port)
mosq_test.do_send_receive(helper, publish1s_packet, puback1s_packet, "puback 1s")
helper.close()
if mosq_test.expect_packet(sock, "publish 1r", publish1r_packet):
sock.send(pubrec1r_packet)
sock.send(pingreq_packet)
p = sock.recv(len(pingresp_packet))
if len(p) == 0:
rc = 0
sock.close()
finally:
开发者ID:physycom,项目名称:mosquitto,代码行数:31,代码来源:02-subpub-qos1-bad-pubrec.py
示例10: print
import inspect, os, sys
# From http://stackoverflow.com/questions/279237/python-import-a-module-from-a-folder
cmd_subfolder = os.path.realpath(os.path.abspath(os.path.join(os.path.split(inspect.getfile( inspect.currentframe() ))[0],"..")))
if cmd_subfolder not in sys.path:
sys.path.insert(0, cmd_subfolder)
import mosq_test
rc = 1
keepalive = 60
connect_packet = mosq_test.gen_connect("will-null-topic", keepalive=keepalive, will_topic="", will_payload=struct.pack("!4sB7s", "will", 0, "message"))
connack_packet = mosq_test.gen_connack(rc=2)
cmd = ['../../src/mosquitto', '-p', '1888']
broker = mosq_test.start_broker(filename=os.path.basename(__file__), cmd=cmd)
try:
sock = mosq_test.do_client_connect(connect_packet, "", timeout=30)
rc = 0
sock.close()
finally:
broker.terminate()
broker.wait()
if rc:
(stdo, stde) = broker.communicate()
print(stde)
exit(rc)
开发者ID:120991021,项目名称:mosquitto,代码行数:28,代码来源:07-will-null-topic.py
示例11: print
print("FAIL: Received data when nothing is expected")
print("Fail on cases local_topic=%r, remote_topic=%r" % (
local_topic, remote_topic,
))
return 1
except socket.timeout:
pass
bridge.settimeout(20)
return 0
try:
(bridge, address) = ssock.accept()
bridge.settimeout(2)
sock = mosq_test.do_client_connect(
client_connect_packet, client_connack_packet,
port=port2,
)
rc = test(bridge, sock)
sock.close()
bridge.close()
finally:
os.remove(conf_file)
try:
bridge.close()
except NameError:
pass
broker.terminate()
broker.wait()
开发者ID:PierreF,项目名称:mosquitto,代码行数:32,代码来源:06-bridge-br2b-remapping.py
示例12:
mid=1
subscribe_packet = mosq_test.gen_subscribe(mid, "flipflop/test", 1)
suback_packet = mosq_test.gen_suback(mid, 1)
mid=1
publish_packet = mosq_test.gen_publish("flipflop/test", qos=1, mid=mid, payload="message")
puback_packet = mosq_test.gen_puback(mid)
port = mosq_test.get_port()
broker = mosq_test.start_broker(filename=os.path.basename(__file__), port=port)
try:
# mosquitto_sub -i sub -t 'topic' -q 1 -d -c
sub_sock = mosq_test.do_client_connect(connect_packet_sub_persistent, connack_packet_sub, port=port)
mosq_test.do_send_receive(sub_sock, subscribe_packet, suback_packet, "subscribe persistent 1")
# And disconnect
sub_sock.close()
# mosquitto_sub -i sub -t 'topic' -q 1 -d
sub_sock = mosq_test.do_client_connect(connect_packet_sub_clean, connack_packet_sub, port=port)
mosq_test.do_send_receive(sub_sock, subscribe_packet, suback_packet, "subscribe clean")
# And disconnect
sub_sock.close()
# mosquitto_sub -i sub -t 'topic' -v -q 1 -d -c
sub_sock = mosq_test.do_client_connect(connect_packet_sub_persistent, connack_packet_sub, port=port)
mosq_test.do_send_receive(sub_sock, subscribe_packet, suback_packet, "subscribe persistent 2")
# and in a separate shell
开发者ID:physycom,项目名称:mosquitto,代码行数:30,代码来源:02-subscribe-persistence-flipflop.py
示例13:
rc = 1
keepalive = 10
connect_packet = mosq_test.gen_connect("no-psk-test-client", keepalive=keepalive)
connack_packet = mosq_test.gen_connack(rc=0)
mid = 1
subscribe_packet = mosq_test.gen_subscribe(mid, "psk/test", 0)
suback_packet = mosq_test.gen_suback(mid, 0)
publish_packet = mosq_test.gen_publish(topic="psk/test", payload="message", qos=0)
broker = mosq_test.start_broker(filename=os.path.basename(__file__), port=1889)
try:
sock = mosq_test.do_client_connect(connect_packet, connack_packet, port=1889, timeout=20)
sock.send(subscribe_packet)
if mosq_test.expect_packet(sock, "suback", suback_packet):
pub = subprocess.Popen(['./c/08-tls-psk-pub.test'], env=env)
if pub.wait():
raise ValueError
if mosq_test.expect_packet(sock, "publish", publish_packet):
rc = 0
sock.close()
finally:
broker.terminate()
broker.wait()
if rc:
(stdo, stde) = broker.communicate()
开发者ID:AddictXQ,项目名称:mosquitto,代码行数:30,代码来源:08-tls-psk-pub.py
示例14: print
import mosq_test
rc = 1
mid = 53
keepalive = 60
connect_packet_ok = mosq_test.gen_connect("will-acl-test", keepalive=keepalive, will_topic="ok", will_payload="should be ok")
connack_packet_ok = mosq_test.gen_connack(rc=0)
connect_packet = mosq_test.gen_connect("will-acl-test", keepalive=keepalive, will_topic="will/acl/test", will_payload="should be denied")
connack_packet = mosq_test.gen_connack(rc=5)
broker = subprocess.Popen(['../../src/mosquitto', '-c', '07-will-acl-denied.conf'], stderr=subprocess.PIPE)
try:
time.sleep(0.5)
sock_ok = mosq_test.do_client_connect(connect_packet_ok, connack_packet_ok, timeout=5, connack_error="connack ok")
sock = mosq_test.do_client_connect(connect_packet, connack_packet)
rc = 0
sock.close()
sock_ok.close()
finally:
broker.terminate()
broker.wait()
if rc:
(stdo, stde) = broker.communicate()
print(stde)
exit(rc)
开发者ID:Allanceng,项目名称:mosquitto-new,代码行数:29,代码来源:07-will-acl-denied.py
注:本文中的mosq_test.do_client_connect函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论