本文整理汇总了Python中mod_pywebsocket.common.is_control_opcode函数的典型用法代码示例。如果您正苦于以下问题:Python is_control_opcode函数的具体用法?Python is_control_opcode怎么用?Python is_control_opcode使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了is_control_opcode函数的13个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: _outgoing_filter
def _outgoing_filter(self, frame):
"""Transform outgoing frames. This method is called only by
an _OutgoingFilter instance.
"""
original_payload_size = len(frame.payload)
self._outgoing_average_ratio_calculator.add_original_bytes(
original_payload_size)
if (not self._compress_outgoing or
common.is_control_opcode(frame.opcode)):
self._outgoing_average_ratio_calculator.add_result_bytes(
original_payload_size)
return
frame.payload = self._rfc1979_deflater.filter(
frame.payload, bfinal=self._bfinal)
frame.rsv1 = 1
filtered_payload_size = len(frame.payload)
self._outgoing_average_ratio_calculator.add_result_bytes(
filtered_payload_size)
_log_outgoing_compression_ratio(
self._logger,
original_payload_size,
filtered_payload_size,
self._outgoing_average_ratio_calculator.get_average_ratio())
开发者ID:Coder206,项目名称:servo,代码行数:28,代码来源:extensions.py
示例2: _incoming_filter
def _incoming_filter(self, frame):
"""Transform incoming frames. This method is called only by
an _IncomingFilter instance.
"""
received_payload_size = len(frame.payload)
self._incoming_average_ratio_calculator.add_result_bytes(
received_payload_size)
if frame.rsv1 != 1 or common.is_control_opcode(frame.opcode):
self._incoming_average_ratio_calculator.add_original_bytes(
received_payload_size)
return
frame.payload = self._rfc1979_inflater.filter(frame.payload)
frame.rsv1 = 0
filtered_payload_size = len(frame.payload)
self._incoming_average_ratio_calculator.add_original_bytes(
filtered_payload_size)
_log_incoming_compression_ratio(
self._logger,
received_payload_size,
filtered_payload_size,
self._incoming_average_ratio_calculator.get_average_ratio())
开发者ID:Coder206,项目名称:servo,代码行数:26,代码来源:extensions.py
示例3: _outgoing_filter
def _outgoing_filter(self, frame):
"""Transform outgoing frames. This method is called only by
an _OutgoingFilter instance.
"""
original_payload_size = len(frame.payload)
self._total_outgoing_payload_bytes += original_payload_size
if (not self._compress_outgoing or
common.is_control_opcode(frame.opcode)):
self._total_filtered_outgoing_payload_bytes += (
original_payload_size)
return
frame.payload = self._deflater.filter(
frame.payload, bfinal=self._bfinal)
frame.rsv1 = 1
filtered_payload_size = len(frame.payload)
self._total_filtered_outgoing_payload_bytes += filtered_payload_size
_log_compression_ratio(self._logger, original_payload_size,
self._total_outgoing_payload_bytes,
filtered_payload_size,
self._total_filtered_outgoing_payload_bytes)
开发者ID:ASCIIteapot,项目名称:pyload,代码行数:25,代码来源:extensions.py
示例4: _incoming_filter
def _incoming_filter(self, frame):
"""Transform incoming frames. This method is called only by
an _IncomingFilter instance.
"""
received_payload_size = len(frame.payload)
self._total_incoming_payload_bytes += received_payload_size
if frame.rsv1 != 1 or common.is_control_opcode(frame.opcode):
self._total_filtered_incoming_payload_bytes += (
received_payload_size)
return
frame.payload = self._inflater.filter(frame.payload)
frame.rsv1 = 0
filtered_payload_size = len(frame.payload)
self._total_filtered_incoming_payload_bytes += filtered_payload_size
# Print inf when ratio is not available.
ratio = float('inf')
average_ratio = float('inf')
if received_payload_size != 0:
ratio = float(received_payload_size) / filtered_payload_size
if self._total_filtered_incoming_payload_bytes != 0:
average_ratio = (
float(self._total_incoming_payload_bytes) /
self._total_filtered_incoming_payload_bytes)
self._logger.debug(
'Incoming compress ratio: %f (average: %f)' %
(ratio, average_ratio))
开发者ID:beefone,项目名称:pyload,代码行数:31,代码来源:extensions.py
示例5: _outgoing_filter
def _outgoing_filter(self, frame):
"""Transform outgoing frames. This method is called only by
an _OutgoingFilter instance.
"""
original_payload_size = len(frame.payload)
self._total_outgoing_payload_bytes += original_payload_size
if (not self._compress_outgoing or
common.is_control_opcode(frame.opcode)):
self._total_filtered_outgoing_payload_bytes += (
original_payload_size)
return
frame.payload = self._deflater.filter(frame.payload)
frame.rsv1 = 1
filtered_payload_size = len(frame.payload)
self._total_filtered_outgoing_payload_bytes += filtered_payload_size
# Print inf when ratio is not available.
ratio = float('inf')
average_ratio = float('inf')
if original_payload_size != 0:
ratio = float(filtered_payload_size) / original_payload_size
if self._total_outgoing_payload_bytes != 0:
average_ratio = (
float(self._total_filtered_outgoing_payload_bytes) /
self._total_outgoing_payload_bytes)
self._logger.debug(
'Outgoing compress ratio: %f (average: %f)' %
(ratio, average_ratio))
开发者ID:beefone,项目名称:pyload,代码行数:32,代码来源:extensions.py
示例6: _get_message_from_frame
def _get_message_from_frame(self, frame):
"""Gets a message from frame. If the message is composed of fragmented
frames and the frame is not the last fragmented frame, this method
returns None. The whole message will be returned when the last
fragmented frame is passed to this method.
Raises:
InvalidFrameException: when the frame doesn't match defragmentation
context, or the frame contains invalid data.
"""
if frame.opcode == common.OPCODE_CONTINUATION:
if not self._received_fragments:
if frame.fin:
raise InvalidFrameException(
'Received a termination frame but fragmentation '
'not started')
else:
raise InvalidFrameException(
'Received an intermediate frame but '
'fragmentation not started')
if frame.fin:
# End of fragmentation frame
self._received_fragments.append(frame.payload)
message = ''.join(self._received_fragments)
self._received_fragments = []
return message
else:
# Intermediate frame
self._received_fragments.append(frame.payload)
return None
else:
if self._received_fragments:
if frame.fin:
raise InvalidFrameException(
'Received an unfragmented frame without '
'terminating existing fragmentation')
else:
raise InvalidFrameException(
'New fragmentation started without terminating '
'existing fragmentation')
if frame.fin:
# Unfragmented frame
self._original_opcode = frame.opcode
return frame.payload
else:
# Start of fragmentation frame
if (not self._options.allow_fragmented_control_frame and
common.is_control_opcode(frame.opcode)):
raise InvalidFrameException(
'Control frames must not be fragmented')
self._original_opcode = frame.opcode
self._received_fragments.append(frame.payload)
return None
开发者ID:4Christopher,项目名称:pyload,代码行数:59,代码来源:_stream_hybi.py
示例7: _incoming_filter
def _incoming_filter(self, frame):
"""Transform incoming frames. This method is called only by
an _IncomingFilter instance.
"""
if frame.rsv1 != 1 or common.is_control_opcode(frame.opcode):
return
frame.payload = self._inflater.filter(frame.payload)
frame.rsv1 = 0
开发者ID:cscheid,项目名称:forte,代码行数:10,代码来源:extensions.py
示例8: _outgoing_filter
def _outgoing_filter(self, frame):
"""Transform outgoing frames. This method is called only by
an _OutgoingFilter instance.
"""
if (not self._compress_outgoing or
common.is_control_opcode(frame.opcode)):
return
frame.payload = self._deflater.filter(frame.payload)
frame.rsv1 = 1
开发者ID:cscheid,项目名称:forte,代码行数:11,代码来源:extensions.py
示例9: _incoming_filter
def _incoming_filter(self, frame):
"""Transform incoming frames. This method is called only by
an _IncomingFilter instance.
"""
received_payload_size = len(frame.payload)
self._total_incoming_payload_bytes += received_payload_size
if frame.rsv1 != 1 or common.is_control_opcode(frame.opcode):
self._total_filtered_incoming_payload_bytes += (
received_payload_size)
return
frame.payload = self._inflater.filter(frame.payload)
frame.rsv1 = 0
filtered_payload_size = len(frame.payload)
self._total_filtered_incoming_payload_bytes += filtered_payload_size
_log_decompression_ratio(self._logger, received_payload_size,
self._total_incoming_payload_bytes,
filtered_payload_size,
self._total_filtered_incoming_payload_bytes)
开发者ID:ASCIIteapot,项目名称:pyload,代码行数:23,代码来源:extensions.py
示例10: _process_outgoing_frame
def _process_outgoing_frame(self, frame, compression_bit):
if (not compression_bit or
common.is_control_opcode(frame.opcode)):
return
frame.rsv1 = 1
开发者ID:Coder206,项目名称:servo,代码行数:6,代码来源:extensions.py
示例11: _process_incoming_frame
def _process_incoming_frame(self, frame):
if frame.rsv1 == 1 and not common.is_control_opcode(frame.opcode):
self._incoming_message_filter.decompress_next_message()
frame.rsv1 = 0
开发者ID:Coder206,项目名称:servo,代码行数:4,代码来源:extensions.py
示例12: receive_message
def receive_message(self):
"""Receive a WebSocket frame and return its payload as a text in
unicode or a binary in str.
Returns:
payload data of the frame
- as unicode instance if received text frame
- as str instance if received binary frame
or None iff received closing handshake.
Raises:
BadOperationException: when called on a client-terminated
connection.
ConnectionTerminatedException: when read returns empty
string.
InvalidFrameException: when the frame contains invalid
data.
UnsupportedFrameException: when the received frame has
flags, opcode we cannot handle. You can ignore this
exception and continue receiving the next frame.
"""
if self._request.client_terminated:
raise BadOperationException(
'Requested receive_message after receiving a closing '
'handshake')
while True:
# mp_conn.read will block if no bytes are available.
# Timeout is controlled by TimeOut directive of Apache.
frame = self._receive_frame_as_frame_object()
for frame_filter in self._options.incoming_frame_filters:
frame_filter.filter(frame)
if frame.rsv1 or frame.rsv2 or frame.rsv3:
raise UnsupportedFrameException(
'Unsupported flag is set (rsv = %d%d%d)' %
(frame.rsv1, frame.rsv2, frame.rsv3))
if frame.opcode == common.OPCODE_CONTINUATION:
if not self._received_fragments:
if frame.fin:
raise InvalidFrameException(
'Received a termination frame but fragmentation '
'not started')
else:
raise InvalidFrameException(
'Received an intermediate frame but '
'fragmentation not started')
if frame.fin:
# End of fragmentation frame
self._received_fragments.append(frame.payload)
message = ''.join(self._received_fragments)
self._received_fragments = []
else:
# Intermediate frame
self._received_fragments.append(frame.payload)
continue
else:
if self._received_fragments:
if frame.fin:
raise InvalidFrameException(
'Received an unfragmented frame without '
'terminating existing fragmentation')
else:
raise InvalidFrameException(
'New fragmentation started without terminating '
'existing fragmentation')
if frame.fin:
# Unfragmented frame
if (common.is_control_opcode(frame.opcode) and
len(frame.payload) > 125):
raise InvalidFrameException(
'Application data size of control frames must be '
'125 bytes or less')
self._original_opcode = frame.opcode
message = frame.payload
else:
# Start of fragmentation frame
if common.is_control_opcode(frame.opcode):
raise InvalidFrameException(
'Control frames must not be fragmented')
self._original_opcode = frame.opcode
self._received_fragments.append(frame.payload)
continue
if self._original_opcode == common.OPCODE_TEXT:
# The WebSocket protocol section 4.4 specifies that invalid
# characters must be replaced with U+fffd REPLACEMENT
# CHARACTER.
try:
return message.decode('utf-8')
except UnicodeDecodeError, e:
#.........这里部分代码省略.........
开发者ID:cscheid,项目名称:forte,代码行数:101,代码来源:_stream_hybi.py
示例13: receive_message
def receive_message(self):
"""Receive a WebSocket frame and return its payload as a text in
unicode or a binary in str.
Returns:
payload data of the frame
- as unicode instance if received text frame
- as str instance if received binary frame
or None iff received closing handshake.
Raises:
BadOperationException: when called on a client-terminated
connection.
ConnectionTerminatedException: when read returns empty
string.
InvalidFrameException: when the frame contains invalid
data.
UnsupportedFrameException: when the received frame has
flags, opcode we cannot handle. You can ignore this
exception and continue receiving the next frame.
"""
if self._request.client_terminated:
raise BadOperationException(
'Requested receive_message after receiving a closing '
'handshake')
while True:
# mp_conn.read will block if no bytes are available.
# Timeout is controlled by TimeOut directive of Apache.
frame = self._receive_frame_as_frame_object()
# Check the constraint on the payload size for control frames
# before extension processes the frame.
# See also http://tools.ietf.org/html/rfc6455#section-5.5
if (common.is_control_opcode(frame.opcode) and
len(frame.payload) > 125):
raise InvalidFrameException(
'Payload data size of control frames must be 125 bytes or '
'less')
for frame_filter in self._options.incoming_frame_filters:
frame_filter.filter(frame)
if frame.rsv1 or frame.rsv2 or frame.rsv3:
raise UnsupportedFrameException(
'Unsupported flag is set (rsv = %d%d%d)' %
(frame.rsv1, frame.rsv2, frame.rsv3))
message = self._get_message_from_frame(frame)
if message is None:
continue
for message_filter in self._options.incoming_message_filters:
message = message_filter.filter(message)
if self._original_opcode == common.OPCODE_TEXT:
# The WebSocket protocol section 4.4 specifies that invalid
# characters must be replaced with U+fffd REPLACEMENT
# CHARACTER.
try:
return message.decode('utf-8')
except UnicodeDecodeError as e:
raise InvalidUTF8Exception(e)
elif self._original_opcode == common.OPCODE_BINARY:
return message
elif self._original_opcode == common.OPCODE_CLOSE:
self._process_close_message(message)
return None
elif self._original_opcode == common.OPCODE_PING:
self._process_ping_message(message)
elif self._original_opcode == common.OPCODE_PONG:
self._process_pong_message(message)
else:
raise UnsupportedFrameException(
'Opcode %d is not supported' % self._original_opcode)
开发者ID:Coder206,项目名称:servo,代码行数:76,代码来源:_stream_hybi.py
注:本文中的mod_pywebsocket.common.is_control_opcode函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论