• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Python inverse.write_inverse_operator函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Python中mne.minimum_norm.inverse.write_inverse_operator函数的典型用法代码示例。如果您正苦于以下问题:Python write_inverse_operator函数的具体用法?Python write_inverse_operator怎么用?Python write_inverse_operator使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了write_inverse_operator函数的8个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: test_io_inverse_operator

def test_io_inverse_operator():
    """Test IO of inverse_operator
    """
    tempdir = _TempDir()
    inverse_operator = read_inverse_operator(fname_inv)
    x = repr(inverse_operator)
    assert_true(x)
    assert_true(isinstance(inverse_operator['noise_cov'], Covariance))
    # just do one example for .gz, as it should generalize
    _compare_io(inverse_operator, '.gz')

    # test warnings on bad filenames
    with warnings.catch_warnings(record=True) as w:
        warnings.simplefilter('always')
        inv_badname = op.join(tempdir, 'test-bad-name.fif.gz')
        write_inverse_operator(inv_badname, inverse_operator)
        read_inverse_operator(inv_badname)
    assert_naming(w, 'test_inverse.py', 2)

    # make sure we can write and read
    inv_fname = op.join(tempdir, 'test-inv.fif')
    args = (10, 1. / 9., 'dSPM')
    inv_prep = prepare_inverse_operator(inverse_operator, *args)
    write_inverse_operator(inv_fname, inv_prep)
    inv_read = read_inverse_operator(inv_fname)
    _compare(inverse_operator, inv_read)
    inv_read_prep = prepare_inverse_operator(inv_read, *args)
    _compare(inv_prep, inv_read_prep)
    inv_prep_prep = prepare_inverse_operator(inv_prep, *args)
    _compare(inv_prep, inv_prep_prep)
开发者ID:claire-braboszcz,项目名称:mne-python,代码行数:30,代码来源:test_inverse.py


示例2: test_io_inverse_operator

def test_io_inverse_operator():
    """Test IO of inverse_operator."""
    tempdir = _TempDir()
    inverse_operator = read_inverse_operator(fname_inv)
    x = repr(inverse_operator)
    assert (x)
    assert (isinstance(inverse_operator['noise_cov'], Covariance))
    # just do one example for .gz, as it should generalize
    _compare_io(inverse_operator, '.gz')

    # test warnings on bad filenames
    inv_badname = op.join(tempdir, 'test-bad-name.fif.gz')
    with pytest.warns(RuntimeWarning, match='-inv.fif'):
        write_inverse_operator(inv_badname, inverse_operator)
    with pytest.warns(RuntimeWarning, match='-inv.fif'):
        read_inverse_operator(inv_badname)

    # make sure we can write and read
    inv_fname = op.join(tempdir, 'test-inv.fif')
    args = (10, 1. / 9., 'dSPM')
    inv_prep = prepare_inverse_operator(inverse_operator, *args)
    write_inverse_operator(inv_fname, inv_prep)
    inv_read = read_inverse_operator(inv_fname)
    _compare(inverse_operator, inv_read)
    inv_read_prep = prepare_inverse_operator(inv_read, *args)
    _compare(inv_prep, inv_read_prep)
    inv_prep_prep = prepare_inverse_operator(inv_prep, *args)
    _compare(inv_prep, inv_prep_prep)
开发者ID:teonbrooks,项目名称:mne-python,代码行数:28,代码来源:test_inverse.py


示例3: test_apply_inverse_sphere

def test_apply_inverse_sphere():
    """Test applying an inverse with a sphere model (rank-deficient)."""
    evoked = _get_evoked()
    evoked.pick_channels(evoked.ch_names[:306:8])
    evoked.info['projs'] = []
    cov = make_ad_hoc_cov(evoked.info)
    sphere = make_sphere_model('auto', 'auto', evoked.info)
    fwd = read_forward_solution(fname_fwd)
    vertices = [fwd['src'][0]['vertno'][::5],
                fwd['src'][1]['vertno'][::5]]
    stc = SourceEstimate(np.zeros((sum(len(v) for v in vertices), 1)),
                         vertices, 0., 1.)
    fwd = restrict_forward_to_stc(fwd, stc)
    fwd = make_forward_solution(evoked.info, fwd['mri_head_t'], fwd['src'],
                                sphere, mindist=5.)
    evoked = EvokedArray(fwd['sol']['data'].copy(), evoked.info)
    assert fwd['sol']['nrow'] == 39
    assert fwd['nsource'] == 101
    assert fwd['sol']['ncol'] == 303
    tempdir = _TempDir()
    temp_fname = op.join(tempdir, 'temp-inv.fif')
    inv = make_inverse_operator(evoked.info, fwd, cov, loose=1.)
    # This forces everything to be float32
    write_inverse_operator(temp_fname, inv)
    inv = read_inverse_operator(temp_fname)
    stc = apply_inverse(evoked, inv, method='eLORETA',
                        method_params=dict(eps=1e-2))
    # assert zero localization bias
    assert_array_equal(np.argmax(stc.data, axis=0),
                       np.repeat(np.arange(101), 3))
开发者ID:teonbrooks,项目名称:mne-python,代码行数:30,代码来源:test_inverse.py


示例4: test_io_inverse_operator

def test_io_inverse_operator():
    """Test IO of inverse_operator
    """
    for inv in [inverse_operator, inverse_operator_vol]:
        inv_init = copy.deepcopy(inv)
        write_inverse_operator('test-inv.fif', inv)
        this_inv = read_inverse_operator('test-inv.fif')

        _compare(inv, inv_init)
        _compare(inv, this_inv)
开发者ID:sudo-nim,项目名称:mne-python,代码行数:10,代码来源:test_inverse.py


示例5: test_io_inverse_operator

def test_io_inverse_operator():
    """Test IO of inverse_operator
    """
    for inv in [inverse_operator, inverse_operator_vol]:
        inv_init = copy.deepcopy(inv)
        for out_file in ['test-inv.fif', 'test-inv.fif.gz']:
            write_inverse_operator(out_file, inv)
            this_inv = read_inverse_operator(out_file)

            _compare(inv, inv_init)
            _compare(inv, this_inv)
开发者ID:starzynski,项目名称:mne-python,代码行数:11,代码来源:test_inverse.py


示例6: _compare_io

def _compare_io(inv_op, out_file_ext='.fif'):
    if out_file_ext == '.fif':
        out_file = op.join(tempdir, 'test-inv.fif')
    elif out_file_ext == '.gz':
        out_file = op.join(tempdir, 'test-inv.fif.gz')
    else:
        raise ValueError('IO test could not complete')
    # Test io operations
    inv_init = copy.deepcopy(inv_op)
    write_inverse_operator(out_file, inv_op)
    read_inv_op = read_inverse_operator(out_file)
    _compare(inv_init, read_inv_op)
    _compare(inv_init, inv_op)
开发者ID:mshamalainen,项目名称:mne-python,代码行数:13,代码来源:test_inverse.py


示例7: test_io_inverse_operator

def test_io_inverse_operator():
    """Test IO of inverse_operator with GZip
    """
    inverse_operator = read_inverse_operator(fname_inv)
    # just do one example for .gz, as it should generalize
    _compare_io(inverse_operator, '.gz')

    # test warnings on bad filenames
    with warnings.catch_warnings(record=True) as w:
        warnings.simplefilter('always')
        inv_badname = op.join(tempdir, 'test-bad-name.fif.gz')
        write_inverse_operator(inv_badname, inverse_operator)
        read_inverse_operator(inv_badname)
    assert_true(len(w) == 2)
开发者ID:rgoj,项目名称:mne-python,代码行数:14,代码来源:test_inverse.py


示例8: test_apply_inverse_operator

def test_apply_inverse_operator():
    """Test MNE inverse computation

    With and without precomputed inverse operator.
    """
    evoked = fiff.Evoked(fname_data, setno=0, baseline=(None, 0))

    stc = apply_inverse(evoked, inverse_operator, lambda2, "MNE")
    assert_true(stc.data.min() > 0)
    assert_true(stc.data.max() < 10e-10)
    assert_true(stc.data.mean() > 1e-11)

    stc = apply_inverse(evoked, inverse_operator, lambda2, "sLORETA")
    assert_true(stc.data.min() > 0)
    assert_true(stc.data.max() < 9.0)
    assert_true(stc.data.mean() > 0.1)

    stc = apply_inverse(evoked, inverse_operator, lambda2, "dSPM")
    assert_true(stc.data.min() > 0)
    assert_true(stc.data.max() < 35)
    assert_true(stc.data.mean() > 0.1)

    # Test MNE inverse computation starting from forward operator
    evoked = fiff.Evoked(fname_data, setno=0, baseline=(None, 0))
    fwd_op = read_forward_solution(fname_fwd, surf_ori=True)

    my_inv_op = make_inverse_operator(evoked.info, fwd_op, noise_cov,
                                      loose=0.2, depth=0.8)
    write_inverse_operator('test-inv.fif', my_inv_op)
    read_my_inv_op = read_inverse_operator('test-inv.fif')
    _compare(my_inv_op, read_my_inv_op)

    my_stc = apply_inverse(evoked, my_inv_op, lambda2, "dSPM")

    assert_true('dev_head_t' in my_inv_op['info'])
    assert_true('mri_head_t' in my_inv_op)

    assert_equal(stc.times, my_stc.times)
    assert_array_almost_equal(stc.data, my_stc.data, 2)
开发者ID:starzynski,项目名称:mne-python,代码行数:39,代码来源:test_inverse.py



注:本文中的mne.minimum_norm.inverse.write_inverse_operator函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Python preprocessing.create_ecg_epochs函数代码示例发布时间:2022-05-27
下一篇:
Python inverse.read_inverse_operator函数代码示例发布时间:2022-05-27
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap