本文整理汇总了Python中mininet.node.OVSSwitch类的典型用法代码示例。如果您正苦于以下问题:Python OVSSwitch类的具体用法?Python OVSSwitch怎么用?Python OVSSwitch使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了OVSSwitch类的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: emptyNet
def emptyNet():
net = Mininet(topo=None, build=False)
c0 = Controller('c0', inNamespace=False)
h1 = Host('h1')
h2 = Host('h2')
#intf1 = Intf("h1-eth1")
#intf2 = Intf("h2-eth1")
s1 = OVSSwitch('br0', inNamespace=False)
Link(h1, s1)
Link(h2, s1)
c0.start()
s1.start([c0])
net.start()
#s1.cmd('ovs-vsctl set bridge br0 protocols=OpenFlow13')
CLI(net)
net.stop()
h1.stop()
h2.stop()
s1.stop()
c0.stop()
开发者ID:exuuwen,项目名称:study,代码行数:27,代码来源:mininet_basic.py
示例2: start
def start( self, *args, **kwargs ):
OVSSwitch.start( self, *args, **kwargs )
OVSBridgeSTP.prio += 1
self.cmd( 'ovs-vsctl set-fail-mode', self, 'standalone' )
self.cmd( 'ovs-vsctl set Bridge', self,
'stp_enable=true',
'other_config:stp-priority=%d' % OVSBridgeSTP.prio )
开发者ID:fmorgner,项目名称:cldinf-lab-8,代码行数:7,代码来源:clos.py
示例3: start
def start(self, controllers):
# Call superclass constructor
OVSSwitch.start(self, controllers)
# Set OpenFlow VersionsHost
self.configureOpenFlowVersion()
# Set Switch IP address
if self.switchIP is not None:
self.cmd('ifconfig', self, self.switchIP)
开发者ID:fredericoschardong,项目名称:escape,代码行数:8,代码来源:CustomNetworkElements.py
示例4: batchShutdown
def batchShutdown( cls, switches, **_kwargs ):
"Stop switches in per-server batches"
key = attrgetter( 'server' )
for server, switchGroup in groupby( sorted( switches, key=key ), key ):
info( '(%s)' % server )
group = tuple( switchGroup )
switch = group[ 0 ]
OVSSwitch.batchShutdown( group, run=switch.rcmd )
return switches
开发者ID:xiaozhou,项目名称:mininet,代码行数:9,代码来源:cluster.py
示例5: start
def start( self, controllers ):
# make sure controllers contains only a ControllerCluster
assert len( controllers ) == 1
ccluster = controllers[ 0 ]
assert type( ccluster ) == ControllerCluster
controller_list = ccluster.clist( self.name )
# TODO: manage order of controllers to control mastership
OVSSwitch.start( self, controllers=controller_list )
开发者ID:opennetworkinglab,项目名称:spring-open,代码行数:9,代码来源:start_topo.py
示例6: run
def run():
OVSSwitch.setup()
setLogLevel('debug')
net = Mininet(topo=KeepForwardingSmartDownlinkTestTopo(),
switch=OVSSwitch,
controller=RemoteController)
net.start()
CLI(net)
net.stop()
开发者ID:BenjaminUJun,项目名称:ryuo,代码行数:10,代码来源:keep_forwarding_smart_downlink_test_topo.py
示例7: run
def run():
OVSSwitch.setup()
setLogLevel('debug')
net = Mininet(
topo=FailoverTestTopo(),
switch=OVSSwitch,
controller=RemoteController)
net.start()
CLI(net)
net.stop()
开发者ID:BenjaminUJun,项目名称:ryuo,代码行数:11,代码来源:failover-test-topo.py
示例8: batchStartup
def batchStartup( cls, switches ):
result = []
for ovsdb, switchGroup in groupby( switches, attrgetter( 'ovsdb') ):
switchGroup = list( switchGroup )
info( '(%s)' % ovsdb )
result += OVSSwitch.batchStartup( switchGroup, run=ovsdb.cmd )
return result
开发者ID:AntonySilvester,项目名称:OnosSystemTest,代码行数:7,代码来源:multiovs.py
示例9: batchShutdown
def batchShutdown( cls, switches ):
result = []
for ovsdb, switchGroup in groupby( switches, attrgetter( 'ovsdb') ):
switchGroup = list( switchGroup )
info( '(%s)' % ovsdb )
for switch in switches:
if switch.pid == ovsdb.pid:
switch.pid = None
switch.shell = None
result += OVSSwitch.batchShutdown( switchGroup, run=ovsdb.cmd )
for switch in switchGroup:
switch.ovsdbFree()
return result
开发者ID:AntonySilvester,项目名称:OnosSystemTest,代码行数:13,代码来源:multiovs.py
示例10: start
def start(self, controllers):
if self.custom_ctrl is not None:
return OVSSwitch.start(self, [self.custom_ctrl])
else:
return OVSSwitch.start(self, controllers)
开发者ID:mpeuster,项目名称:estate,代码行数:5,代码来源:topology.py
示例11: stop
def stop( self ):
for intf in self.intfList():
if type( intf ) is TCIntf:
self.dropOVSqos( intf )
OVSSwitch.stop( self )
开发者ID:brownsys,项目名称:pane-demo-vm,代码行数:5,代码来源:PaneDemoUtil.py
示例12: __init__
def __init__(self, name, **params):
OVSSwitch.__init__(self, name=name, datapath="kernel", **params)
开发者ID:REANNZ,项目名称:faucet,代码行数:2,代码来源:faucet_mininet_test_base.py
示例13: __init__
def __init__(self, name, reliability=1.0, **params):
OVSSwitch.__init__(self, name, failMode='secure', datapath='kernel', inband=False, protocols=None, **params)
self.reliability = reliability
self._online = True
self.cmd("sysctl -w net.ipv6.conf.all.disable_ipv6=1")
self.cmd("sysctl -w net.ipv6.conf.default.disable_ipv6=1")
开发者ID:UdS-TelecommunicationsLab,项目名称:VirtualTestbed,代码行数:6,代码来源:sdn.py
示例14: __init__
def __init__(self, name, vtep, **params):
self.vtep = vtep
OVSSwitch.__init__(self, name, **params)
开发者ID:opendaylight,项目名称:faas,代码行数:3,代码来源:faas_mininet_launch.py
示例15: start
def start( self, controllers ):
assert len( controllers ) == 1
c0 = controllers[ 0 ]
assert type( c0 ) == ONOSCluster
controllers = c0.clist()
OVSSwitch.start( self, controllers )
开发者ID:packet-tracker,项目名称:onos-1.3.0,代码行数:6,代码来源:onos.py
示例16: start
def start( self, controllers ):
print "starting ", self.name
return OVSSwitch.start( self, [ cmap[ self.name ] ] )
开发者ID:snlab,项目名称:utilities,代码行数:3,代码来源:ysn_8.py
示例17: start
def start(self, controllers):
return OVSSwitch.start(self, controllers)
开发者ID:ShakhMoves,项目名称:ShakhSDVPN,代码行数:2,代码来源:mswitch.py
示例18: addIntf
def addIntf( self, intf, rename=False, **kwargs ):
"Add (and reparent) an interface"
OVSSwitch.addIntf( self, intf, **kwargs )
intf.node = self
if rename:
self.renameIntf( intf )
开发者ID:DeepnessLab,项目名称:moly,代码行数:6,代码来源:mobility.py
示例19: start
def start(self, controllers):
self.init_map(controllers[1:])
return OVSSwitch.start(self, [self.map[self.name]])
开发者ID:jyzhe,项目名称:beehive-netctrl,代码行数:3,代码来源:fattree.py
示例20: __init__
def __init__( self, *args, **kwargs ):
kwargs.update( datapath='user' )
OVSSwitch.__init__( self, *args, **kwargs )
开发者ID:Rabbi18,项目名称:SDNProject,代码行数:3,代码来源:test_switchdpidassignment.py
注:本文中的mininet.node.OVSSwitch类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论