Python cmds.floatFieldGrp函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中maya.cmds.floatFieldGrp函数的典型用法代码示例。如果您正苦于以下问题：Python floatFieldGrp函数的具体用法？Python floatFieldGrp怎么用？Python floatFieldGrp使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了floatFieldGrp函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: setPointValue

def setPointValue(FFG, point=''):
    """
    Set the value of a floatFieldGrp with the position value of a specifeid point
    @param FFG: FloatFieldgrp to set values for
    @type FFG: str
    @param point: Point to get position from
    @type point: str
    """
    # Check point
    if point and not cmds.objExists(point):
        raise Exception('Point object "' + point + '" does not exist!')

    # Get object selection
    sel = cmds.ls(sl=1)
    if not point and not sel:
        raise Exception('No point specified for floatFieldGrp values!')

    # Get point
    if point:
        pos = glTools.utils.base.getPosition(point)
    else:
        pos = glTools.utils.base.getPosition(sel[0])

    # Set float field values
    cmds.floatFieldGrp(FFG, e=True, v1=pos[0], v2=pos[1], v3=pos[2])

开发者ID:bennymuller，项目名称:glTools，代码行数:25，代码来源:utils.py

示例2: doOptions

def doOptions(input_suffix, input_numberTwistJoints, input_elbowAimAxis, input_elbowFrontAxis, input_handFrontAxis):
	"""Specifies the function called when the apply or create button is clicked"""
	try:
		# validate selection
		selection = utils.dg.validateSelection(type='transform', name='wrist joint objects', min=1)
		
		# validate suffix
		suffix = cmds.textFieldGrp(input_suffix, q=True, tx=True)
		utils.dg.validateAffix(suffix)
		
		# set up the forearms
		numberTwistJoints = cmds.intSliderGrp(input_numberTwistJoints, q=True, v=True)
		newSelection = []
		# perform setup for each wrist in the selection
		for wrist in selection:
			elbow = cmds.listRelatives(wrist, p=True, f=True)
			elbowShort = cmds.listRelatives(wrist, p=True)
			newJoints = doSetup(
				elbowShort[0] + suffix, 
				numberTwistJoints, 
				wrist, 
				elbow[0], 
				cmds.floatFieldGrp(input_elbowAimAxis, q=True, v=True), 
				cmds.floatFieldGrp(input_elbowFrontAxis, q=True, v=True), 
				cmds.floatFieldGrp(input_handFrontAxis, q=True, v=True))
			newSelection += newJoints
		# select the newly created joints for easy editing
		cmds.select(newSelection)
	except: raise

开发者ID:0xb1dd1e，项目名称:PipelineConstructionSet，代码行数:29，代码来源:forearmSetup.py

示例3: extendUI

def extendUI(*args):
    """UI for the script"""
    #UI
    if cmds.window("curbWin", exists=True):
        cmds.deleteUI("curbWin")

    cmds.window("curbWin", t="zbw_polyExtender", w=200, h=200)
    cmds.columnLayout("colLO")
    cmds.frameLayout("topFrame", l="Covert Edge", cll=True, bgc=(.2,.2,.2))
    cmds.text("Select poly edge to convert")
    cmds.button("convertBut", l="Convert!", w=200, h=30, bgc=(.8, .8,.6), c=convertEdge)
    cmds.separator(h=5)

    cmds.setParent("colLO")

    cmds.frameLayout("midFrame", l="Create Poly", cll=True, bgc=(.2,.2,.2))
    cmds.text("Select curve")
    cmds.separator(h=5)
    cmds.textFieldGrp("name", l="Name", w=200, cw=[(1,30), (2,170)], tx="newPoly")
    cmds.checkBox("curbCB", l="Positive Direction", v=True)
    # cmds.checkBox("bumpCB", l="Add vertical hump?", v=True)
    cmds.floatFieldGrp("curbFFG", l="Curb Width", cal=((1, "left"),(2,"left")), cw=([1,75],[2,50]), v1=10)
    cmds.intFieldGrp("UDivIFG", l="Width Subdivisions", cal=((1, "left"),(2,"left")), cw=([1,75],[2,50]), v1=1)
    cmds.intFieldGrp("VDivIFG", l="Length Subdivisions", cal=((1, "left"),(2,"left")), cw=([1,75],[2,50]), v1=1)
    cmds.checkBox("polyHistory", l="Keep history on final poly?", v=False)
    cmds.checkBox("history", l="Keep history objects?", v=True, cc=enableHistory)

    cmds.separator(h=5)
    cmds.button("curbBut", l="Create Curb", h=40, w=200, bgc=(.6, .8, .6), c=extendPoly)

    cmds.showWindow("curbWin")
    cmds.window("curbWin", e=True, h=150, w=200)

开发者ID:zethwillie，项目名称:zbw_python_tools，代码行数:32，代码来源:zbw_polyExtend.py

示例4: import2dTrackUI

def import2dTrackUI():
    """
    """
    # Build UI Window
    window = 'import2dTrackUI'
    if cmds.window(window, q=True, ex=True): cmds.deleteUI(window)
    window = cmds.window(window, title='Import 2D Track', wh=[500, 350])

    # Build UI Elements
    cmds.columnLayout(adjustableColumn=True)
    perspCamListTSL = cmds.textScrollList('importTrack_camListTSL', numberOfRows=8, ams=False)
    fileTFB = cmds.textFieldButtonGrp('importTrack_fileTFB', label='2D Track File', buttonLabel='Browse')
    cmds.textFieldButtonGrp(fileTFB, e=True, bc='glTools.ui.utils.loadFilePath("' + fileTFB + '",fileFilter="*.*")')
    cmds.textFieldGrp('importTrack_nameTFG', label="Point Name", text='trackPoint1')
    cmds.floatFieldGrp('importTrack_widthFFG', numberOfFields=1, label='Source Pixel Width', value1=2348)
    cmds.floatFieldGrp('importTrack_heightFFG', numberOfFields=1, label='Source Pixel Height', value1=1566)
    cmds.button(label='Import Track',
              c='import glTools.tools.import2dTrack;reload(glTools.tools.import2dTrack);glTools.tools.import2dTrack.import2dTrack()')
    cmds.button(label='Close', c='cmds.deleteUI("' + window + '")')

    # Build Camera List
    camList = cmds.listCameras(p=True)
    for cam in camList: cmds.textScrollList(perspCamListTSL, e=True, a=cam)

    # Show Window
    cmds.showWindow(window)

开发者ID:bennymuller，项目名称:glTools，代码行数:26，代码来源:import2dTrack.py

示例5: attachToCurveFromUI

def attachToCurveFromUI(close=False):
    """
    Execute attachToCurve() from UI
    """
    # Window
    window = 'attachToCurveUI'
    if not cmds.window(window, q=True, ex=1): raise UIError('AttachToCurve UI does not exist!!')
    # Get UI data
    curve = cmds.textFieldGrp('attachToCurveTFB', q=True, text=True)
    transform = cmds.textFieldGrp('attachToCurveTransformTFB', q=True, text=True)
    prefix = cmds.textFieldGrp('attachToCurvePrefixTFG', q=True, text=True)
    closestPoint = cmds.checkBoxGrp('attachToCurveClosestPointCBG', q=True, v1=True)
    param = cmds.floatSliderGrp('attachToCurveParamFSG', q=True, v=True)
    paramAttr = cmds.textFieldGrp('attachToCurveParamAttrTFG', q=True, text=True)
    orient = cmds.checkBoxGrp('attachToCurveOrientCBG', q=True, v1=True)
    upVec = (cmds.floatFieldGrp('attachToCurveUpVecFFG', q=True, v1=True),
             cmds.floatFieldGrp('attachToCurveUpVecFFG', q=True, v2=True),
             cmds.floatFieldGrp('attachToCurveUpVecFFG', q=True, v3=True))
    upVecObj = cmds.textFieldButtonGrp('attachToCurveUpVecObjTFG', q=True, text=True)
    # Check curve
    if not glTools.utils.curve.isCurve(curve):
        raise UserInputError('Object "' + curve + '" is not a valid nurbs curve!!')
    glTools.utils.attach.attachToCurve(curve=curve, transform=transform, uValue=param, useClosestPoint=closestPoint,
                                       orient=orient, upVector=upVec, worldUpObject=upVecObj, uAttr=paramAttr,
                                       prefix=prefix)
    # Cleanup
    if close: cmds.deleteUI(window)

开发者ID:bennymuller，项目名称:glTools，代码行数:27，代码来源:curve.py

示例6: addMirrorMeshCmd

 def addMirrorMeshCmd(self, logicalIndex, *args ):
     
     items = cmds.textScrollList( globalInfo.meshInfoInst._selMeshList, q=1, ai=1 )
     
     if not items: return None
     
     nodeName = amCmd.getBlendAndFixedShapeNode( items[0] )
     targetName, driverInfo, returnIndex = amCmd.addMirrorTarget( items[0], logicalIndex )
     
     cmds.setParent( self._scrollLay )
     cmds.rowColumnLayout( nc=3, cw=[(1,25),(2,self._mainWidthList[0]-30),(3,self._mainWidthList[1]-30) ] )
     cmds.button( l="X", c= partial( self.removeBlendMeshInfoElement, nodeName, logicalIndex ) )
     meshNameField = cmds.textField( tx=targetName.replace( items[0]+'_', '' ), cc=partial( self.meshNameChangeCmd, nodeName, returnIndex ) )
     self._meshNameList.append( meshNameField )
     cmds.popupMenu( markingMenu = 1 )
     cmds.menuItem( l='Edit Anim Curve', rp='W', c=partial( self.editAnimCurveCmd, nodeName, returnIndex ) )
     cmds.menuItem( l='Edit Mesh',rp='N', c=partial( self.editAssigned, returnIndex) )
     cmds.menuItem( l='Add Mirror Mesh',rp='E', c=partial( self.addMirrorMeshCmd, returnIndex) )
     cmds.menuItem( l='Select Delta Points', rp='S', c=partial( self.selectDeltaPointsCmd, items[0], logicalIndex ) )
     widthList = uifnc.setWidthByPerList( [50,50], self._mainWidthList[1] )
     cmds.rowColumnLayout( nc=2, cw=[(1,widthList[0]),(2,widthList[1]-30)] )
     for element in driverInfo:
         engleName, value1, value2, value3= element
         cmds.text( l= engleName )
         cmds.floatFieldGrp( precision=2, nf=3, cw3=[50,50,50], v1=value1, v2=value2, v3=value3 )
     cmds.setParent( '..' )

开发者ID:jonntd，项目名称:mayadev-1，代码行数:26，代码来源:part3_editMesh.py

示例7: getSVFSsetting

def getSVFSsetting():
    posX = 0
    posY = 0
    posZ = 0
    if mc.checkBoxGrp("cBG_plus", q=True, value1=True):
        posX = 1
    elif mc.checkBoxGrp("cBG_minus", q=True, value1=True):
        posX = -1
    elif mc.checkBox("cB_Extra", q=True, value=True):
        posX = mc.floatFieldGrp("fFG_Extra", q=True, value1=True)

    if mc.checkBoxGrp("cBG_plus", q=True, value2=True):
        posY = 1
    elif mc.checkBoxGrp("cBG_minus", q=True, value2=True):
        posY = -1
    elif mc.checkBox("cB_Extra", q=True, value=True):
        posY = mc.floatFieldGrp("fFG_Extra", q=True, value2=True)

    if mc.checkBoxGrp("cBG_plus", q=True, value3=True):
        posZ = 1
    elif mc.checkBoxGrp("cBG_minus", q=True, value3=True):
        posZ = -1
    elif mc.checkBox("cB_Extra", q=True, value=True):
        posZ = mc.floatFieldGrp("fFG_Extra", q=True, value3=True)

    kmSelectVtxFromSide(mc.ls(sl=True, fl=True), [posX, posY, posZ])
    return

开发者ID:smymc，项目名称:Maya-Python，代码行数:27，代码来源:kmSelectVtxFromSide.py

示例8: softDeformerUI

def softDeformerUI():
    """UI for the whole thing"""

    if cmds.window("softModWin", exists = True):
        cmds.deleteUI("softModWin")
    widgets["window"] = cmds.window("softModWin", t="zbw_softDeformer", w=300, h=130)
    widgets["tabLO"] = cmds.tabLayout()
    widgets["smCLO"] = cmds.columnLayout("SoftModDeformer", w=300)

    cmds.separator(h=10)
    widgets["smdTFG"] = cmds.textFieldGrp(l="Deformer Name", w=300, cw=[(1,100),(2,190)], cal=[(1,"left"), (2, "left")], tx="softMod_DEF")
    widgets["firstVertCBG"] = cmds.checkBoxGrp(l="Use only 1st vert (vs. avg pos)", v1=0, cw=[(1,200)], cal=[(1,"left"), (2,"left")])
    widgets["parentCBG"] = cmds.checkBoxGrp(l="Parent Ctrl Under Geo?", v1=0, cw=[(1,200)], cal=[(1,"left"), (2,"left")])
    widgets["incrCBG"] = cmds.checkBoxGrp(l="Increment name after creation?", v1=1, cw=[(1,200)], cal=[(1,"left"), (2,"left")])
    widgets["checkCBG"] = cmds.checkBoxGrp(l="AutoCheck if there are deformers?", v1=1, cw=[(1,200)], cal=[(1,"left"), (2,"left")])
    widgets["scaleFFG"] = cmds.floatFieldGrp(l="Control Scale", v1=1, pre=2, cw=[(1,100),(2,50)], cal=[(1,"left"),(2,"left")])

    cmds.separator(h=10, style="single")
    widgets["button"] = cmds.button(l="Create Deformer", w=300, h=40, bgc=(.6,.8,.6), c=softModDeformerDo)

    #second tab to softselect deformer
    cmds.setParent(widgets["tabLO"])
    widgets["ssCLO"] = cmds.columnLayout("SoftSelectDeformer", w=300)
    widgets["ssdTFG"] = cmds.textFieldGrp(l="Deformer Name", w=300, cw=[(1,100),(2,190)], cal=[(1,"left"), (2, "left")], tx="softSelect_DEF")
    widgets["ssCPOMCBG"] = cmds.checkBoxGrp(l="Control to closest point on mesh?", v1=1, cw=[(1,200)], cal=[(1,"left"), (2,"left")])
    widgets["ssParentCBG"] = cmds.checkBoxGrp(l="Parent Ctrl Under Geo?", v1=0, cw=[(1,200)], cal=[(1,"left"), (2,"left")])
    widgets["ssIncrCBG"] = cmds.checkBoxGrp(l="Increment name after creation?", v1=1, cw=[(1,200)], cal=[(1,"left"), (2,"left")])
    widgets["ssCheckCBG"] = cmds.checkBoxGrp(l="AutoCheck if there are deformers?", v1=1, cw=[(1,200)], cal=[(1,"left"), (2,"left")])
    widgets["ssScaleFFG"] = cmds.floatFieldGrp(l="Control Scale", v1=1, pre=2, cw=[(1,100),(2,50)], cal=[(1,"left"),(2,"left")])
    cmds.separator(h=10, style="single")
    widgets["button"] = cmds.button(l="Create Deformer", w=300, h=40, bgc=(.6,.8,.6), c=softSelectDef)


    cmds.showWindow(widgets["window"])

开发者ID:zethwillie，项目名称:zbw_python_tools，代码行数:34，代码来源:zbw_softDeformer.py

示例9: doOptions

def doOptions(input_width, input_divisionsType, input_divisions, input_divisionsPerUnit, input_taper, input_frontTwist, input_lengthTwist, input_upVector, input_uvScale, input_uvScaleType, input_uvPinLocation):
	"""This is the function called when the apply or create button is clicked"""
	try:
		utils.dg.validateSelection(type='transform', min=1)
		curves = utils.dg.getFilteredRelatives(cmds.ls(sl=True), 'nurbsCurve', False)
		if len(curves) is 0: raise Exception('None of the objects you have selected are NURBS curves.')
				
		# call the command
		if cmds.radioButtonGrp(input_divisionsType, q=True, select=True) == 1:
			cmds.am_ribbon(
				width = cmds.floatSliderGrp(input_width, q=True, v=True),
				divisions = cmds.floatSliderGrp(input_divisions, q=True, v=True),
				taper = cmds.floatSliderGrp(input_taper, q=True, v=True),
				twistBase = cmds.floatSliderGrp(input_frontTwist, q=True, v=True),
				twistLength = cmds.floatSliderGrp(input_lengthTwist, q=True, v=True),
				upVector = cmds.floatFieldGrp(input_upVector, q=True, v=True),
				uvScale = cmds.floatSliderGrp(input_uvScale, q=True, v=True),
				uvGroupScale = cmds.radioButtonGrp(input_uvScaleType, q=True, select=True) - 1,
				uvPin = cmds.radioButtonGrp(input_uvPinLocation, q=True, select=True) - 1)
		else:
			cmds.am_ribbon(
				width = cmds.floatSliderGrp(input_width, q=True, v=True),
				divisionsPerUnit = cmds.floatSliderGrp(input_divisionsPerUnit, q=True, v=True),
				taper = cmds.floatSliderGrp(input_taper, q=True, v=True),
				twistBase = cmds.floatSliderGrp(input_frontTwist, q=True, v=True),
				twistLength = cmds.floatSliderGrp(input_lengthTwist, q=True, v=True),
				upVector = cmds.floatFieldGrp(input_upVector, q=True, v=True),
				uvScale = cmds.floatSliderGrp(input_uvScale, q=True, v=True),
				uvGroupScale = cmds.radioButtonGrp(input_uvScaleType, q=True, select=True) - 1,
				uvPin = cmds.radioButtonGrp(input_uvPinLocation, q=True, select=True) - 1)
	except: raise

开发者ID:0xb1dd1e，项目名称:PipelineConstructionSet，代码行数:31，代码来源:makeRibbons.py

示例10: prefPut

 def prefPut(self):
     cmds.checkBox(self.c2, e=True, v=self.prefs['BkRmvCon'])
     cmds.checkBox(self.c3, e=True, v=self.prefs['BkTmRng'])
     cmds.checkBox(self.c4, e=True, v=self.prefs['BkAllFrms'])
     cmds.checkBox(self.c7, e=True, v=self.prefs['LocTrns'])
     cmds.checkBox(self.c8, e=True, v=self.prefs['LocRot'])
     cmds.checkBox(self.c12, e=True, v=self.prefs['LocAllFrms'])
     cmds.checkBox(self.c17, e=True, v=self.prefs['PrntRgPosOnly'])
     cmds.checkBox(self.c15, e=True, v=self.prefs['AimRgNegAim'])
     cmds.radioButtonGrp(self.aimGrp, e=True, select=self.prefs['AimRgAim'])
     cmds.checkBox(self.c16, e=True, v=self.prefs['AimRgNegUp'])
     cmds.radioButtonGrp(self.upGrp, e=True, select=self.prefs['AimRgUp'])
     cmds.checkBox(self.c18, e=True, v=self.prefs['PvtRgNegAim'])
     cmds.radioButtonGrp(self.aimPivotGrp, e=True, select=self.prefs['PvtRgAim'])
     cmds.checkBox(self.c19, e=True, v=self.prefs['PvtRgNegUp'])
     cmds.radioButtonGrp(self.upPivotGrp, e=True, select=self.prefs['PvtRgUp'])
     cmds.checkBox(self.c21, e=True, v=self.prefs['PvtRgMstr'])
     cmds.radioButtonGrp(self.masterGrp, e=True, select=self.prefs['PvtRgMstrSl'])
     cmds.radioButtonGrp(self.masterGrp, e=True, en=self.prefs['PvtRgMstrEnbl'])
     cmds.checkBox(self.c22, e=True, v=self.prefs['PvtRgAutoDstnc'])
     cmds.floatSliderGrp(self.sl1, e=True, v=self.prefs['PvtRgDstnc'])
     cmds.floatSliderGrp(self.sl1, e=True, en=self.prefs['PvtRgDstncEnbl'])
     cmds.checkBox(self.c21, e=True, v=self.prefs['LcAllFrms'])
     cmds.checkBox(self.c5, e=True, v=self.prefs['PlcCon'])
     cmds.radioButtonGrp(self.conGrp, e=True, select=self.prefs['PlcConTo'])
     cmds.radioButtonGrp(self.conGrp, e=True, en=self.prefs['PlcConToEnbl'])
     cmds.checkBox(self.c13, e=True, v=self.prefs['PlcMtchKys'])
     cmds.checkBox(self.c9, e=True, v=self.prefs['ConOffst'])
     cmds.checkBox(self.c10, e=True, v=self.prefs['ConTrns'])
     cmds.checkBox(self.c11, e=True, v=self.prefs['ConRot'])
     cmds.intField(self.actionField1, e=True, v=self.prefs['DstKys'])
     cmds.checkBox(self.c14, e=True, v=self.prefs['DstKysDstrct'])
     cmds.floatFieldGrp(self.floatGroup1, e=True, v=self.prefs['ObjctSpaceOffst'])

开发者ID:boochos，项目名称:work，代码行数:33，代码来源:constraintUI_micro_lib.py

示例11: doOptions

def doOptions(input_referenceObject, input_rotateOrder, input_axis, input_referenceAxis, input_normalizeAxes):
	"""This is the function called when the apply or create button is clicked"""
	try:
		# validate selection
		utils.dg.validateSelection(type='transform', exact=1)
		
		# validate reference object
		referenceObject = cmds.textFieldGrp(input_referenceObject, q=True, tx=True)
		if len(referenceObject) > 0: utils.dg.verifyNode(referenceObject)
		
		# call the command
		if len(referenceObject) > 0:
			cmds.am_exposeTransform(
				ref=referenceObject, 
				ro=utils.kRotateOrderMapping[cmds.optionMenuGrp(input_rotateOrder, q=True, v=True)], 
				a=cmds.floatFieldGrp(input_axis, q=True, v=True), 
				ra=cmds.floatFieldGrp(input_referenceAxis, q=True, v=True), 
				na=cmds.checkBoxGrp(input_normalizeAxes, q=True, v1=True))
		else:
			cmds.am_exposeTransform(
				ro=utils.kRotateOrderMapping[cmds.optionMenuGrp(input_rotateOrder, q=True, v=True)], 
				a=cmds.floatFieldGrp(input_axis, q=True, v=True), 
				ra=cmds.floatFieldGrp(input_referenceAxis, q=True, v=True), 
				na=cmds.checkBoxGrp(input_normalizeAxes, q=True, v1=True))
	except: raise

开发者ID:0xb1dd1e，项目名称:PipelineConstructionSet，代码行数:25，代码来源:exposeTransform.py

示例12: doOptions

def doOptions(input_suffix, input_numberTwistJoints, input_pelvis, input_hipAimAxis, input_hipFrontAxis, input_pelvisAimAxis, input_pelvisFrontAxis):
	"""Specifies the function called when the apply or create button is clicked"""
	try:
		# validate selection
		selection = utils.dg.validateSelection(type='transform', name='knee joint objects', min=1)
		
		# validate suffix
		suffix = cmds.textFieldGrp(input_suffix, q=True, tx=True)
		utils.dg.validateAffix(suffix)
		
		# validate pelvis
		pelvis = cmds.textFieldGrp(input_pelvis, q=True, tx=True)
		utils.dg.verifyNode(pelvis)
		
		# set up the hip
		numberTwistJoints = cmds.intSliderGrp(input_numberTwistJoints, q=True, v=True)
		newSelection = []
		# perform setup for each knee in the selection
		for knee in selection:
			hip = cmds.listRelatives(knee, p=True, f=True)
			hipShort = cmds.listRelatives(knee, p=True)
			newJoints = doSetup(
				hipShort[0] + suffix, 
				numberTwistJoints, 
				knee, 
				hip[0], 
				pelvis, 
				cmds.floatFieldGrp(input_hipAimAxis, q=True, v=True), 
				cmds.floatFieldGrp(input_hipFrontAxis, q=True, v=True), 
				cmds.floatFieldGrp(input_pelvisAimAxis, q=True, v=True), 
				cmds.floatFieldGrp(input_pelvisFrontAxis, q=True, v=True))
			newSelection += newJoints
		# select the newly created joints for easy editing
		cmds.select(newSelection)
	except: raise

开发者ID:0xb1dd1e，项目名称:PipelineConstructionSet，代码行数:35，代码来源:hipSetup.py

示例13: manualScale

def manualScale(*args):
	"""uses the float field group to manually scale the object by that amount"""
	origScale = cmds.floatFieldGrp(widgets["trackerFFG"], q=True, v1=True)

	#get value from field
	scalePer = cmds.floatFieldGrp(widgets["scaleFFG"] , q=True, v1=True)
	scaleVal = scalePer/100
	#scaleShapes
	sel = cmds.ls(sl=True, type="transform")
	if sel:
		for obj in sel:
			#decide on object type
			objShape = cmds.listRelatives(obj, s=True)
			shapeType = cmds.objectType(objShape)

			cmds.select(cl=True)
			if shapeType == "nurbsSurface" or shapeType == "nurbsCurve":
				#get the components
				cvs = cmds.select((obj + ".cv[*]"))
				cmds.scale(scaleVal, scaleVal, scaleVal)
			elif shapeType == "mesh":
				#get the components
				cvs = cmds.select((obj + ".vtx[*]"))
				cmds.scale(scaleVal, scaleVal, scaleVal)
			else:
				cmds.warning("%s isn't a nurbs or poly object, so it was skipped")

	#clear and reselect all
	if sel:
		cmds.select(cl=True)
		cmds.select(sel)
		newScale = origScale * scaleVal
		cmds.floatFieldGrp(widgets["trackerFFG"], e=True, v1=newScale)

开发者ID:zethwillie，项目名称:zbw_python_tools，代码行数:33，代码来源:zbw_shapeScale.py

示例14: origScale

def origScale(*args):
	"""scales the object by the inverse of the currentScale (as measured by the tracker floatfield). So if everything was reset when you started it will
	undo all subsequent scaling operations"""

	currScale = cmds.floatFieldGrp(widgets["trackerFFG"], q=True, v1=True)
	scaleVal = 100/currScale
	# print "%s = factor"%factor
	# scaleVal = currScale * factor/100
	cmds.floatFieldGrp(widgets["trackerFFG"], e=True, v1=scaleVal*currScale)

	sel = cmds.ls(sl=True, type="transform")
	if sel:
		for obj in sel:
			#decide on object type
			objShape = cmds.listRelatives(obj, s=True)
			shapeType = cmds.objectType(objShape)

			cmds.select(cl=True)
			if shapeType == "nurbsSurface" or shapeType == "nurbsCurve":
				#get the components
				cvs = cmds.select((obj + ".cv[*]"))
				cmds.scale(scaleVal, scaleVal, scaleVal)
			elif shapeType == "mesh":
				#get the components
				cvs = cmds.select((obj + ".vtx[*]"))
				cmds.scale(scaleVal, scaleVal, scaleVal)
			else:
				cmds.warning("%s isn't a nurbs or poly object, so it was skipped")

	#clear and reselect all
	if sel:
		cmds.select(cl=True)
		cmds.select(sel)
		cmds.floatFieldGrp(widgets["scaleFFG"], e=True, v1=scaleVal*100)

开发者ID:zethwillie，项目名称:zbw_python_tools，代码行数:34，代码来源:zbw_shapeScale.py

示例15: init

	def __init__(self) :

		#check to see if the window exists:
		if cmds.window("Box2DTool", exists = True):
			cmds.deleteUI("Box2DTool")

		#create the window:
		window = cmds.window("Box2DTool", title = 'Box2D Tool', sizeable = False)

		#create the main layout:
		cmds.columnLayout(columnWidth = 300, adjustableColumn = False, columnAttach = ('both', 10))

		#make dockable:
		allowedAreas = ['right', 'left']
		cmds.dockControl( 'Box2D Tool', area='left', content=window, allowedArea=allowedAreas )

		self.dim=cmds.floatFieldGrp('dim', numberOfFields=2, label='Dimension', extraLabel='pixel', value1=5, value2=1  )
		self.dim=cmds.floatFieldGrp('friction', numberOfFields=1, label='Friction',  value1=0.2 )
		self.dim=cmds.floatFieldGrp('restitution', numberOfFields=1, label='restitution',  value1=0.0 )
		self.dim=cmds.floatFieldGrp('density', numberOfFields=1, label='density',  value1=0.0 )
		cmds.separator()
		self.dim=cmds.floatFieldGrp('rotation', numberOfFields=1, label='rotation',  value1=0.0 )
		cmds.separator()
		cmds.optionMenuGrp( "bodyType",l='Body Type' )
		cmds.menuItem(label='b2_staticBody');
		cmds.menuItem(label='b2_kinematicBody');
		cmds.menuItem(label='b2_dynamicBody');


		cmds.button(label = "PlaceBlock", w = 100, h = 25, c = self.placeBlock)
		cmds.separator()
		cmds.button( label='Export', command=self.export )

开发者ID:NCCA，项目名称:Box2DExport，代码行数:32，代码来源:Box2DTool.py

示例16: shapeScaleUI

def shapeScaleUI():
	"""UI for the script"""

	if (cmds.window("ssWin", exists=True)):
		cmds.deleteUI("ssWin", window=True)
		#cmds.winPref("shapeScaleWin", remove=True)

	widgets["win"] = cmds.window("ssWin", t="zbw_shapeScale", w=400, h=75, s=False)

	widgets["colLo"] = cmds.columnLayout("mainCLO", w=400, h=75)
	widgets["formLO"] = cmds.formLayout(nd=100, w=400)
	cmds.separator(h=10)
	widgets["slider"] = cmds.floatSliderGrp("slider", f=False, l="Scale", min=0.01, max=2, pre=3, v=1, adj=3, cal=([1, "left"], [2, "left"], [3, "left"]), cw=([1, 50], [2,220]), cc= shapeScaleExecute)
	cmds.separator(h=10)
	widgets["scaleFFG"] = cmds.floatFieldGrp(v1=100, pre= 1, l="Scale %", en1=True, w=110, cw=([1,50],[2,50]), cal=([1,"left"], [2,"left"]))
	widgets["scaleDoBut"] = cmds.button(l="Scale", w= 160, h=25, bgc=(.2,.4,.2), c=manualScale)
	widgets["trackerFFG"] = cmds.floatFieldGrp(l="Change", w=100, v1=100, pre=1, en1=False, cw=([1,45],[2,50]), cal=([1,"left"], [2,"right"]), bgc=(.2,.2,.2))
	widgets["clearBut"] = cmds.button(l="RESET", w=45, bgc=(.2,.2,.2), c=resetScale)

	widgets["origBut"] = cmds.button(l="ORIG", w=45, bgc=(.2,.2,.2), c=origScale)

	#attach to form layout
	cmds.formLayout(widgets["formLO"], e=True, attachForm=[(widgets["slider"], 'top', 5), (widgets["slider"], 'left', 5)])
	cmds.formLayout(widgets["formLO"], e=True, attachForm=[(widgets["scaleFFG"], 'top', 34), (widgets["scaleFFG"], 'left', 5)])
	cmds.formLayout(widgets["formLO"], e=True, attachForm=[(widgets["scaleDoBut"], 'top', 34), (widgets["scaleDoBut"], 'left', 120)])
	cmds.formLayout(widgets["formLO"], e=True, attachForm=[(widgets["clearBut"], 'top', 34), (widgets["clearBut"], 'left', 344)])
	cmds.formLayout(widgets["formLO"], e=True, attachForm=[(widgets["trackerFFG"], 'top', 5), (widgets["trackerFFG"], 'left', 290)])
	cmds.formLayout(widgets["formLO"], e=True, attachForm=[(widgets["origBut"], 'top', 34), (widgets["origBut"], 'left', 290)])

	cmds.showWindow(widgets["win"])
	cmds.window(widgets["win"], e=True, w=400, h=75)

开发者ID:zethwillie，项目名称:zbw_python_tools，代码行数:31，代码来源:zbw_shapeScale.py

示例17: setPlanes

def setPlanes(*args):
    """sets clipping planes for cameras based on float fields in UI. Depending on radio button, it will either do all camera or only selected"""

    all = cmds.radioButtonGrp("camRBG", q=True, sl=True)
    far = cmds.floatFieldGrp("farFFG", q=True, v1=True)
    near = cmds.floatFieldGrp("nearFFG", q=True, v1=True)

    cams = []
    if all==1:
        cams.extend(cmds.ls(type="camera"))
    elif all==2:
        transf = cmds.ls(sl=True, type="transform")
        for each in transf:
            shape = cmds.listRelatives(each, s=True)
            if shape:
                if cmds.objectType(shape) == "camera":
                    cams.extend(shape)
    #for each, set shape.farClipPlane 100000
    if cams:
        print cams
        for cam in cams:
            try:
                cmds.setAttr("%s.farClipPlane"%cam, far)
                cmds.setAttr("%s.nearClipPlane"%cam, near)

            except:
                cmds.warning("Couldn't change the farClipPlane of %s"%cam)

开发者ID:zethwillie，项目名称:zbw_python_tools，代码行数:27，代码来源:zbw_setClipPlanes.py

示例18: addMultiAttr

def addMultiAttr():
    #Create a variable for the window name
    winName = 'blend'
    winTitle = 'rh_addMultiAttr'
    #Delete the window if it exists
    if cmds.window(winName, exists=True):
        cmds.deleteUI(winName, window=True)
    #Build the main window
    cmds.window(winName, title=winTitle, sizeable=True)
    cmds.textFieldButtonGrp('Obj',label='Object :', text='', ed = False,buttonLabel='Load Sel',bc = 'sel()')
    cmds.columnLayout(adjustableColumn=True)    
    cmds.textFieldGrp('Attr',l='Attribute:',text='')   

    cmds.columnLayout(adjustableColumn=True)  
    cmds.floatFieldGrp('minAttr', numberOfFields=1, label='Min Value', value1=0) 
       
    cmds.columnLayout(adjustableColumn=True) 
    cmds.floatFieldGrp('maxAttr', numberOfFields=1, label='Max Value', value1=0)
    
    cmds.columnLayout(adjustableColumn=True)        
    cmds.button(label='Contact', command='Connect()')
    cmds.columnLayout(adjustableColumn=True)
    #Show the window
    cmds.showWindow(winName)
    cmds.window(winName, edit=True, width=300, height=120)

开发者ID:RyugasakiHu，项目名称:Maya-tools，代码行数:25，代码来源:rh_addMultiAttr.py

示例19: attachToSurfaceFromUI

def attachToSurfaceFromUI(close=True):
    """
    Execute attachToSurface() from UI
    @param close:
    """
    # Window
    window = 'attachToSurfaceUI'
    if not cmds.window(window, q=True, ex=1): raise UIError('AttachToSurface UI does not exist!!')
    # Get UI data
    surf = cmds.textFieldGrp('attachToSurfaceTFB', q=True, text=True)
    # Check surface
    if not glTools.utils.surface.isSurface(surf):
        raise UserInputError('Object "' + surf + '" is not a valid nurbs surface!!')
    trans = cmds.textFieldGrp('attachToSurfaceTransformTFB', q=True, text=True)
    pre = cmds.textFieldGrp('attachToSurfacePrefixTFG', q=True, text=True)
    uParam = cmds.floatFieldGrp('attachToSurfaceParamTFB', q=True, v1=True)
    vParam = cmds.floatFieldGrp('attachToSurfaceParamTFB', q=True, v2=True)
    closePnt = cmds.checkBoxGrp('attachToSurfaceClosePntCBG', q=True, v1=True)
    uAttr = cmds.textFieldGrp('attachToSurfaceUAttrTFG', q=True, text=True)
    vAttr = cmds.textFieldGrp('attachToSurfaceVAttrTFG', q=True, text=True)
    # Orient
    orient = cmds.checkBoxGrp('attachToSurfaceOrientCBG', q=True, v1=True)
    # Orient Options
    tanU = str.lower(str(cmds.optionMenuGrp('attachToSurfaceUAxisOMG', q=True, v=True)))
    tanV = str.lower(str(cmds.optionMenuGrp('attachToSurfaceVAxisOMG', q=True, v=True)))
    align = str.lower(str(cmds.optionMenuGrp('attachToSurfaceAlignToOMG', q=True, v=True)))

    # Execute command
    result = glTools.utils.attach.attachToSurface(surface=surf, transform=trans, uValue=uParam, vValue=vParam,
                                                  useClosestPoint=closePnt, orient=orient, uAxis=tanU, vAxis=tanV,
                                                  uAttr=uAttr, vAttr=vAttr, alignTo=align, prefix=pre)

    # Cleanup
    if close: cmds.deleteUI(window)

开发者ID:bennymuller，项目名称:glTools，代码行数:34，代码来源:surface.py

示例20: ui

def ui():
	'''
	'''
	# Window
	window = 'transformDrivenBlendUI'
	if mc.window(window,q=True,ex=1): mc.deleteUI(window)
	window = mc.window(window,t='Transform Driven Blend')
	
	# Layout
	cl = mc.columnLayout()
	
	# UI Elements
	driveAttrTFG = mc.textFieldGrp('tdb_driveAttrTFG',label='Drive Attr', text='')
	blendShapeTFG = mc.textFieldGrp('tdb_blendShapeTFG',label='BlendShape', text='')
	target1TFG = mc.textFieldGrp('tdb_target1TFG',label='Target 1', text='',cc='glTools.ui.transformDrivenBlend.refreshUI()')
	target2TFG = mc.textFieldGrp('tdb_target2TFG',label='Target 2', text='',cc='glTools.ui.transformDrivenBlend.refreshUI()')
	weight1FFG = mc.floatFieldGrp('tdb_weight1FFG',numberOfFields=1,label='Weight 1',v1=1.0)
	weight2FFG = mc.floatFieldGrp('tdb_weight2FFG',numberOfFields=1,label='Weight 2',v1=-1.0)
	overlapFFG = mc.floatFieldGrp('tdb_overlapFFG',numberOfFields=1,label='Overlap',v1=0.0)
	prefixTFG = mc.textFieldGrp('tdb_prefixTFG',label='Prefix', text='')
	createB = mc.button('tdb_createB',label='Create',c='glTools.ui.transformDrivenBlend.executeFromUI()')
	refreshB = mc.button('tdb_refreshB',label='Refresh',c='glTools.ui.transformDrivenBlend.refreshUI()')
	cancelB = mc.button('tdb_cancelB',label='Cancel',c='mc.deleteUI('+window+')')
	
	# Popup Menus
	mc.popupMenu('tdb_blendShapePUM',p=blendShapeTFG)
	mc.popupMenu('tdb_target1PUM',p=target1TFG)
	mc.popupMenu('tdb_target2PUM',p=target2TFG)
	mc.popupMenu('tdb_driveAttrPUM',p=driveAttrTFG)
	mc.menuItem(label='Set from selected',c='glTools.ui.utils.loadChannelBoxSel("'+driveAttrTFG+'")')
	
	# Show Window
	refreshUI()
	mc.showWindow(window)

开发者ID:auqeyjf，项目名称:glTools，代码行数:34，代码来源:transformDrivenBlend.py

注：本文中的maya.cmds.floatFieldGrp函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python cmds.floatSliderGrp函数代码示例发布时间：2022-05-27

Python cmds.floatField函数代码示例发布时间：2022-05-27

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13925|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10291|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4165|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4064|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3889|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3538|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3065|2022-01-22

8 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2723|2022-01-22

9 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2682|2022-05-25

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2344|2022-01-22

客服电话

电子邮件

Python cmds.floatFieldGrp函数代码示例

示例1: setPointValue

示例2: doOptions

示例3: extendUI

示例4: import2dTrackUI

示例5: attachToCurveFromUI

示例6: addMirrorMeshCmd

示例7: getSVFSsetting

示例8: softDeformerUI

示例9: doOptions

示例10: prefPut

示例11: doOptions

示例12: doOptions

示例13: manualScale

示例14: origScale

示例15: __init__

示例16: shapeScaleUI

示例17: setPlanes

示例18: addMultiAttr

示例19: attachToSurfaceFromUI

示例20: ui

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053

示例15: init