• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Python matplotlib.rcdefaults函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Python中matplotlib.rcdefaults函数的典型用法代码示例。如果您正苦于以下问题:Python rcdefaults函数的具体用法?Python rcdefaults怎么用?Python rcdefaults使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了rcdefaults函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: plot_polar_subplot

def plot_polar_subplot(fig):
    #
    # Polar demo
    #
    import pylab

    r = arange(0,1,0.001)
    theta = 2*2*pi*r

    # radar green, solid grid lines
    matplotlib.rc('grid', color='#316931', linewidth=1, linestyle='-')

    ax = fig.add_subplot(1, 2, 1, polar=True, axisbg='#d5de9c')
    ax.plot(theta, r, color='#ee8d18', lw=3)

    ax.set_title("And there was much rejoicing!", fontsize=14)
    matplotlib.rcdefaults()

    #
    # First part of the subplot demo
    #
    def f(t):
        return cos(2*pi*t) * exp(-t)

    t1 = arange(0.0, 5.0, 0.10)
    t2 = arange(0.0, 5.0, 0.02)

    A1 = fig.add_subplot(1, 2, 2)
    A1.plot(t1, f(t1), 'bo')
    A1.plot(t2, f(t2), 'k')
    A1.grid(True)

    A1.set_title('A tale of one subplot')
    A1.set_ylabel('Damped oscillation', fontsize=10)
    A1.set_xlabel('time (s)', fontsize=10)
开发者ID:willmore,项目名称:D2C,代码行数:35,代码来源:plotting_test.py


示例2: set_mpl_backend

def set_mpl_backend():

    try:
        from qtpy import PYQT5
    except:
        # If Qt isn't available, we don't have to worry about
        # setting the backend
        return

    from matplotlib import rcParams, rcdefaults

    # standardize mpl setup
    rcdefaults()

    if PYQT5:
        rcParams['backend'] = 'Qt5Agg'
    else:
        rcParams['backend'] = 'Qt4Agg'

    # The following is a workaround for the fact that Matplotlib checks the
    # rcParams at import time, not at run-time. I have opened an issue with
    # Matplotlib here: https://github.com/matplotlib/matplotlib/issues/5513
    from matplotlib import get_backend
    from matplotlib import backends
    backends.backend = get_backend()
开发者ID:PennyQ,项目名称:glue,代码行数:25,代码来源:_mpl_backend.py


示例3: plot_curves

 def plot_curves(self, freq, data1, label1, limit1, data2, label2, limit2):
   matplotlib.rcdefaults()
   matplotlib.rcParams['axes.formatter.use_mathtext'] = True
   self.figure.clf()
   bottom = len(self.cursors) * 0.04 + 0.13
   self.figure.subplots_adjust(left = 0.16, bottom = bottom, right = 0.84, top = 0.96)
   axes1 = self.figure.add_subplot(111)
   axes1.cla()
   axes1.xaxis.grid()
   axes1.set_xlabel('kHz')
   axes1.set_ylabel(label1)
   xlim = self.xlim(freq)
   axes1.set_xlim(xlim)
   if limit1 is not None: axes1.set_ylim(limit1)
   self.curve1, = axes1.plot(freq, data1, color = 'blue', label = label1)
   self.add_cursors(axes1)
   if data2 is None:
     self.canvas.draw()
     return
   axes1.tick_params('y', color = 'blue', labelcolor = 'blue')
   axes1.yaxis.label.set_color('blue')
   axes2 = axes1.twinx()
   axes2.spines['left'].set_color('blue')
   axes2.spines['right'].set_color('red')
   axes2.set_ylabel(label2)
   axes2.set_xlim(xlim)
   if limit2 is not None: axes2.set_ylim(limit2)
   axes2.tick_params('y', color = 'red', labelcolor = 'red')
   axes2.yaxis.label.set_color('red')
   self.curve2, = axes2.plot(freq, data2, color = 'red', label = label2)
   self.canvas.draw()
开发者ID:pavel-demin,项目名称:red-pitaya-notes,代码行数:31,代码来源:vna.py


示例4: setup_method

    def setup_method(self, method):
        TestPlotBase.setup_method(self, method)
        import matplotlib as mpl
        mpl.rcdefaults()

        self.ts = tm.makeTimeSeries()
        self.ts.name = 'ts'
开发者ID:BobMcFry,项目名称:pandas,代码行数:7,代码来源:test_misc.py


示例5: plotMovement

 def plotMovement(self, parametersFile, targetTranslations, targetRotations):
     """
     """
     parameters = numpy.loadtxt(parametersFile)
     Vsize = len(parameters)
     vols = range(0,Vsize-1)
     translations = parameters[1:Vsize,0:3]
     rotations = parameters[1:Vsize,3:6]
     rotations = rotations / numpy.pi * 180
 
     plotdata = [(translations,'translation (mm)',targetTranslations),
                 (rotations,'rotation (degree)',targetRotations)
                 ]
 
     for data, ylabel, pngoutput in plotdata:
         matplotlib.pyplot.clf()
         px, = matplotlib.pyplot.plot(vols, data[:,0])
         py, = matplotlib.pyplot.plot(vols, data[:,1])
         pz, = matplotlib.pyplot.plot(vols, data[:,2])
         matplotlib.pyplot.xlabel('DWI volumes')
         matplotlib.pyplot.xlim([0,Vsize+10])
         matplotlib.pyplot.ylabel(ylabel)
         matplotlib.pyplot.legend([px, py, pz], ['x', 'y', 'z'])
         matplotlib.pyplot.savefig(pngoutput)
 
     matplotlib.pyplot.close()
     matplotlib.rcdefaults()
开发者ID:sbrambati,项目名称:toad,代码行数:27,代码来源:qa.py


示例6: context

def context(style, after_reset=False):
    """Context manager for using style settings temporarily.

    Parameters
    ----------
    style : str, dict, or list
        A style specification. Valid options are:

        +------+-------------------------------------------------------------+
        | str  | The name of a style or a path/URL to a style file. For a    |
        |      | list of available style names, see `style.available`.       |
        +------+-------------------------------------------------------------+
        | dict | Dictionary with valid key/value pairs for                   |
        |      | `matplotlib.rcParams`.                                      |
        +------+-------------------------------------------------------------+
        | list | A list of style specifiers (str or dict) applied from first |
        |      | to last in the list.                                        |
        +------+-------------------------------------------------------------+

    after_reset : bool
        If True, apply style after resetting settings to their defaults;
        otherwise, apply style on top of the current settings.
    """
    with mpl.rc_context():
        if after_reset:
            mpl.rcdefaults()
        use(style)
        yield
开发者ID:dopplershift,项目名称:matplotlib,代码行数:28,代码来源:core.py


示例7: set_mpl_defaults

def set_mpl_defaults(defaults=0):
	""" Sets defaults for future mpl plots this session
	defaults = 0: Normal mpl defaults
			 = 1: More readable
			 = 2: Publication setting """
	if defaults == 0: # matplotlib defaults
		mpl.rcdefaults()
	elif defaults == 1:
		ax_labelsize = 20
		ax_titlesize = 22
		tick_labelsize = 'large'
		major_tick = dict(size=6, width=1.5, pad=4)
		minor_tick = dict(size=3, width=1, pad=4)
		lines = dict(linewidth=2.0, markersize=8)

		mpl.rc('axes', labelsize=ax_labelsize, titlesize = ax_titlesize)

		mpl.rc('xtick', labelsize=tick_labelsize)
		mpl.rc('ytick', labelsize=tick_labelsize)

		mpl.rc('xtick.major', **major_tick)
		mpl.rc('xtick.minor', **minor_tick)

		mpl.rc('ytick.major', **major_tick)
		mpl.rc('ytick.minor', **minor_tick)

		mpl.rc('lines', **lines)

	else:
		raise ValueError('mpl defaults defaults \'%d\' not recognised' % defaults)

	return
开发者ID:TomFarley,项目名称:tf_libs,代码行数:32,代码来源:tf_plot.py


示例8: setUp

    def setUp(self):
        TestPlotBase.setUp(self)
        import matplotlib as mpl
        mpl.rcdefaults()

        self.ts = tm.makeTimeSeries()
        self.ts.name = 'ts'
开发者ID:tsdlovell,项目名称:pandas,代码行数:7,代码来源:test_misc.py


示例9: mpl_init

def mpl_init(fontsize=10):
    '''
    Initialize Matplotlib rc parameters Pyrocko style.

    Returns the matplotlib.pyplot module for convenience.
    '''

    import matplotlib

    matplotlib.rcdefaults()
    matplotlib.rc('font', size=fontsize)
    matplotlib.rc('axes', linewidth=1.5)
    matplotlib.rc('xtick', direction='out')
    matplotlib.rc('ytick', direction='out')
    ts = fontsize * 0.7071
    matplotlib.rc('xtick.major', size=ts, width=0.5, pad=ts)
    matplotlib.rc('ytick.major', size=ts, width=0.5, pad=ts)
    matplotlib.rc('figure', facecolor='white')

    try:
        matplotlib.rc('axes', color_cycle=[to01(x) for x in graph_colors])
    except KeyError:
        pass

    from matplotlib import pyplot as plt
    return plt
开发者ID:gomes310,项目名称:pyrocko,代码行数:26,代码来源:plot.py


示例10: __enter__

    def __enter__(self):
        """
        Set matplotlib defaults.
        """
        from matplotlib import get_backend, rcParams, rcdefaults
        import locale

        try:
            locale.setlocale(locale.LC_ALL, str('en_US.UTF-8'))
        except:
            try:
                locale.setlocale(locale.LC_ALL,
                                 str('English_United States.1252'))
            except:
                msg = "Could not set locale to English/United States. " + \
                      "Some date-related tests may fail"
                warnings.warn(msg)

        if get_backend().upper() != 'AGG':
            import matplotlib
            try:
                matplotlib.use('AGG', warn=False)
            except TypeError:
                msg = "Image comparison requires matplotlib backend 'AGG'"
                warnings.warn(msg)

        # set matplotlib builtin default settings for testing
        rcdefaults()
        rcParams['font.family'] = 'Bitstream Vera Sans'
        rcParams['text.hinting'] = False
        try:
            rcParams['text.hinting_factor'] = 8
        except KeyError:
            warnings.warn("could not set rcParams['text.hinting_factor']")
        return self
开发者ID:angelcalayag,项目名称:obspy,代码行数:35,代码来源:base.py


示例11: setup

def setup():
    # The baseline images are created in this locale, so we should use
    # it during all of the tests.
    import locale
    import warnings
    from matplotlib.backends import backend_agg, backend_pdf, backend_svg

    try:
        locale.setlocale(locale.LC_ALL, str("en_US.UTF-8"))
    except locale.Error:
        try:
            locale.setlocale(locale.LC_ALL, str("English_United States.1252"))
        except locale.Error:
            warnings.warn("Could not set locale to English/United States. " "Some date-related tests may fail")

    use("Agg", warn=False)  # use Agg backend for these tests

    # These settings *must* be hardcoded for running the comparison
    # tests and are not necessarily the default values as specified in
    # rcsetup.py
    rcdefaults()  # Start with all defaults
    rcParams["font.family"] = "Bitstream Vera Sans"
    rcParams["text.hinting"] = False
    rcParams["text.hinting_factor"] = 8

    # Clear the font caches.  Otherwise, the hinting mode can travel
    # from one test to another.
    backend_agg.RendererAgg._fontd.clear()
    backend_pdf.RendererPdf.truetype_font_cache.clear()
    backend_svg.RendererSVG.fontd.clear()
开发者ID:Nuevalgo,项目名称:Feedbot,代码行数:30,代码来源:__init__.py


示例12: setup

def setup():
    # The baseline images are created in this locale, so we should use
    # it during all of the tests.
    import locale
    import warnings
    from matplotlib.backends import backend_agg, backend_pdf, backend_svg

    try:
        locale.setlocale(locale.LC_ALL, str('en_US.UTF-8'))
    except locale.Error:
        try:
            locale.setlocale(locale.LC_ALL, str('English_United States.1252'))
        except locale.Error:
            warnings.warn(
                "Could not set locale to English/United States. "
                "Some date-related tests may fail")

    use('Agg', warn=False)  # use Agg backend for these tests

    # These settings *must* be hardcoded for running the comparison
    # tests and are not necessarily the default values as specified in
    # rcsetup.py
    rcdefaults()  # Start with all defaults

    set_font_settings_for_testing()
开发者ID:aragilar,项目名称:matplotlib,代码行数:25,代码来源:__init__.py


示例13: _setup

def _setup():
    # The baseline images are created in this locale, so we should use
    # it during all of the tests.
    try:
        locale.setlocale(locale.LC_ALL, str('en_US.UTF-8'))
    except locale.Error:
        try:
            locale.setlocale(locale.LC_ALL, str('English_United States.1252'))
        except locale.Error:
            warnings.warn(
                "Could not set locale to English/United States. "
                "Some date-related tests may fail")

    plt.switch_backend('Agg')  # use Agg backend for these test
    if mpl.get_backend().lower() != "agg":
        msg = ("Using a wrong matplotlib backend ({0}), "
               "which will not produce proper images")
        raise Exception(msg.format(mpl.get_backend()))

    # These settings *must* be hardcoded for running the comparison
    # tests
    mpl.rcdefaults()  # Start with all defaults
    mpl.rcParams['text.hinting'] = True
    mpl.rcParams['text.antialiased'] = True
    mpl.rcParams['text.hinting_factor'] = 8

    # make sure we don't carry over bad plots from former tests
    msg = ("no of open figs: {} -> find the last test with ' "
           "python tests.py -v' and add a '@cleanup' decorator.")
    assert len(plt.get_fignums()) == 0, msg.format(plt.get_fignums())
开发者ID:jwhendy,项目名称:plotnine,代码行数:30,代码来源:conftest.py


示例14: analyse_sign_frame_size_fluctuations

def analyse_sign_frame_size_fluctuations(annotation_path, output_file):
    with open(output_file, 'w') as outp:
        raw_data = pd.read_csv(annotation_path, delimiter=';')
        outp.write("Analyse frame size fluctuations.\n")
        data = pd.DataFrame()
        data['width'] = raw_data['Lower right corner X'] - raw_data['Upper left corner X']
        data['height'] = raw_data['Lower right corner Y'] - raw_data['Upper left corner Y']
        outp.write("Minimum width = {}, minimum height = {}\n".format(data['width'].min(), data['height'].min()))
        outp.write("Maximum width = {}, maximum height = {}\n".format(data['width'].max(), data['height'].max()))

        matplotlib.rcdefaults()
        matplotlib.rcParams['font.family'] = 'fantasy'
        matplotlib.rcParams['font.fantasy'] = 'Times New Roman', 'Ubuntu', 'Arial', 'Tahoma', 'Calibri'
        matplotlib.rcParams.update({'font.size': 18})

        hist, bins = np.histogram(data['width'], bins=range(data['width'].min(), data['width'].max(), 5))
        width = 0.7 * (bins[1] - bins[0])
        center = (bins[:-1] + bins[1:]) / 2
        plt.bar(center, hist, align='center', width=width)
        plt.title("Ширина дорожных знаков")
        plt.xlabel("Ширина")
        plt.ylabel("Сколько раз встречалась")
        plt.xticks(bins, bins)
        plt.show()

        hist, bins = np.histogram(data['height'], bins=range(data['width'].min(), data['width'].max(), 5))
        width = 0.7 * (bins[1] - bins[0])
        center = (bins[:-1] + bins[1:]) / 2
        plt.bar(center, hist, align='center', width=width)
        plt.title("Высота дорожных знаков")
        plt.xlabel("Высота")
        plt.ylabel("Сколько раз встречалась")
        plt.xticks(bins, bins)
        plt.show()
开发者ID:dimmddr,项目名称:roadSignsNN,代码行数:34,代码来源:data_utils.py


示例15: wind_dir_pressure

def wind_dir_pressure(year=2013):
    from statsmodels.nonparametric.kernel_density import KDEMultivariate as KDE
    import robust as rb

    min2 = 0
    sigfac = 3
    sigsamp = 5

    d = get_data(year=year)
    wdir = d["winddir_deg"]
    
    wdir_rand = wdir + np.random.normal(0,12,len(wdir))
    bad = np.isnan(wdir_rand)
    wdir_rand[bad] = np.random.uniform(0,360,np.sum(bad))
    
    press = d["pressure"]
    
    dist1 = wdir_rand
    dist2 = press
    
    med1 = np.median(dist1)
    sig1 = rb.std(dist1)
    datamin1 = np.min(dist1)
    datamax1 = np.max(dist1)
    min1 = 0.0
    max1 = 360.0


    med2 = np.median(dist2)
    sig2 = rb.std(dist2)
    datamin2 = np.min(dist2)
    datamax2 = np.max(dist2)
    min2 = np.min(dist2)
    max2 = np.max(dist2)
    
    X, Y = np.mgrid[min1:max1:100j, min2:max2:100j]
    positions = np.vstack([X.ravel(), Y.ravel()])
    values = np.vstack([dist1, dist2])
    
    kernel = KDE(values,var_type='cc',bw=[sig1/sigsamp,sig2/sigsamp])
    Z = np.reshape(kernel.pdf(positions).T, X.shape)
    
    aspect = (max1-min1)/(max2-min2) * 8.5/11.0

    plot_params()
    plt.ion()
    plt.figure(5,figsize=(11,8.5))
    plt.clf()
    ax = plt.subplot(111)
    ax.imshow(np.rot90(Z), cmap=plt.cm.CMRmap_r,aspect=aspect, \
              extent=[min1, max1, min2, max2],origin='upper')
    ax.yaxis.labelpad = 12
    ax.set_ylabel('Atmospheric Pressure (in-Hg)',fontsize=fs)
    ax.set_xlabel('Wind Direction (degrees)',fontsize=fs)
    plt.title('Wind Direction and Pressure at Thacher Observatory in '+str(year),fontsize=fs)
    
    plt.savefig('Wind_Direction_Pressure_'+str(year)+'.png',dpi=300)
    mpl.rcdefaults()

    return
开发者ID:ThacherObservatory,项目名称:observatory,代码行数:60,代码来源:weather.py


示例16: set_mpl_backend

def set_mpl_backend():

    from matplotlib import rcParams, rcdefaults

    # Standardize mpl setup
    rcdefaults()

    # Set default backend to Agg. The Qt and Jupyter glue applications don't
    # use the default backend, so this is just to make sure that importing
    # matplotlib doesn't cause errors related to the MacOSX or Qt backend.
    rcParams['backend'] = 'Agg'

    # Disable key bindings in matplotlib
    for setting in list(rcParams.keys()):
        if setting.startswith('keymap'):
            rcParams[setting] = ''

    # Set the MPLBACKEND variable explicitly, because ipykernel uses the lack of
    # MPLBACKEND variable to indicate that it should use its own backend, and
    # this in turn causes some rcParams to be changed, causing test failures
    # etc.
    os.environ['MPLBACKEND'] = 'Agg'

    # Explicitly switch backend
    from matplotlib.pyplot import switch_backend
    switch_backend('agg')
开发者ID:glue-viz,项目名称:glue,代码行数:26,代码来源:_mpl_backend.py


示例17: _setup

def _setup():
    # The baseline images are created in this locale, so we should use
    # it during all of the tests.
    import locale
    import warnings
    from matplotlib.backends import backend_agg, backend_pdf, backend_svg

    try:
        locale.setlocale(locale.LC_ALL, str('en_US.UTF-8'))
    except locale.Error:
        try:
            locale.setlocale(locale.LC_ALL, str('English_United States.1252'))
        except locale.Error:
            warnings.warn(
                "Could not set locale to English/United States. "
                "Some date-related tests may fail")

    mpl.use('Agg', warn=False)  # use Agg backend for these tests
    if mpl.get_backend().lower() != "agg":
        raise Exception(("Using a wrong matplotlib backend ({0}), which will not produce proper "
                        "images").format(mpl.get_backend()))

    # These settings *must* be hardcoded for running the comparison
    # tests
    mpl.rcdefaults()  # Start with all defaults
    mpl.rcParams['text.hinting'] = True
    mpl.rcParams['text.antialiased'] = True
    #mpl.rcParams['text.hinting_factor'] = 8

    # Clear the font caches.  Otherwise, the hinting mode can travel
    # from one test to another.
    backend_agg.RendererAgg._fontd.clear()
    backend_pdf.RendererPdf.truetype_font_cache.clear()
    backend_svg.RendererSVG.fontd.clear()
开发者ID:janschulz,项目名称:ggplot,代码行数:34,代码来源:__init__.py


示例18: setup_method

    def setup_method(self, method):

        import matplotlib as mpl
        from pandas.plotting._matplotlib import compat
        mpl.rcdefaults()

        self.mpl_ge_2_2_3 = compat._mpl_ge_2_2_3()
        self.mpl_ge_3_0_0 = compat._mpl_ge_3_0_0()
        self.mpl_ge_3_1_0 = compat._mpl_ge_3_1_0()

        self.bp_n_objects = 7
        self.polycollection_factor = 2
        self.default_figsize = (6.4, 4.8)
        self.default_tick_position = 'left'

        n = 100
        with tm.RNGContext(42):
            gender = np.random.choice(['Male', 'Female'], size=n)
            classroom = np.random.choice(['A', 'B', 'C'], size=n)

            self.hist_df = DataFrame({'gender': gender,
                                      'classroom': classroom,
                                      'height': random.normal(66, 4, size=n),
                                      'weight': random.normal(161, 32, size=n),
                                      'category': random.randint(4, size=n)})

        self.tdf = tm.makeTimeDataFrame()
        self.hexbin_df = DataFrame({"A": np.random.uniform(size=20),
                                    "B": np.random.uniform(size=20),
                                    "C": np.arange(20) + np.random.uniform(
                                        size=20)})
开发者ID:forking-repos,项目名称:pandas,代码行数:31,代码来源:common.py


示例19: setup

def setup():
    # The baseline images are created in this locale, so we should use
    # it during all of the tests.
    import locale
    import warnings

    try:
        locale.setlocale(locale.LC_ALL, str('en_US.UTF-8'))
    except locale.Error:
        try:
            locale.setlocale(locale.LC_ALL, str('English_United States.1252'))
        except locale.Error:
            warnings.warn(
                "Could not set locale to English/United States. "
                "Some date-related tests may fail")

    use('Agg', warn=False) # use Agg backend for these tests

    # These settings *must* be hardcoded for running the comparison
    # tests and are not necessarily the default values as specified in
    # rcsetup.py
    rcdefaults()  # Start with all defaults
    rcParams['font.family'] = 'Bitstream Vera Sans'
    rcParams['text.hinting'] = False
    rcParams['text.hinting_factor'] = 8
开发者ID:Patrick-Reed,项目名称:matplotlib,代码行数:25,代码来源:__init__.py


示例20: apply_rcparams

def apply_rcparams(kind="fast"):
    """Quickly apply rcparams for given purposes.

    Parameters
    ----------
    kind: {'default', 'fast', 'publication'} (optional)
        Settings to use. Default is 'fast'.
    """
    if kind == "default":
        matplotlib.rcdefaults()
    elif kind == "fast":
        matplotlib.rcParams["text.usetex"] = False
        matplotlib.rcParams["mathtext.fontset"] = "cm"
        matplotlib.rcParams["font.family"] = "sans-serif"
        matplotlib.rcParams["font.size"] = 14
        matplotlib.rcParams["legend.edgecolor"] = "grey"
        matplotlib.rcParams["contour.negative_linestyle"] = "solid"
    elif kind == "publication":
        matplotlib.rcParams["text.usetex"] = True
        preamble = "\\usepackage[cm]{sfmath}\\usepackage{amssymb}"
        matplotlib.rcParams["text.latex.preamble"] = preamble
        matplotlib.rcParams["mathtext.fontset"] = "cm"
        matplotlib.rcParams["font.family"] = "sans-serif"
        matplotlib.rcParams["font.serif"] = "cm"
        matplotlib.rcParams["font.sans-serif"] = "cm"
        matplotlib.rcParams["font.size"] = 14
        matplotlib.rcParams["legend.edgecolor"] = "grey"
        matplotlib.rcParams["contour.negative_linestyle"] = "solid"
开发者ID:wright-group,项目名称:WrightTools,代码行数:28,代码来源:_base.py



注:本文中的matplotlib.rcdefaults函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Python matplotlib.show函数代码示例发布时间:2022-05-27
下一篇:
Python matplotlib.rc_params_from_file函数代码示例发布时间:2022-05-27
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap