• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ softdevice_sys_evt_handler_set函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中softdevice_sys_evt_handler_set函数的典型用法代码示例。如果您正苦于以下问题：C++ softdevice_sys_evt_handler_set函数的具体用法？C++ softdevice_sys_evt_handler_set怎么用？C++ softdevice_sys_evt_handler_set使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了softdevice_sys_evt_handler_set函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;
    
    nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
    
    // Initialize the SoftDevice handler module.
    SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, ble_new_event_handler);
    
    ble_enable_params_t ble_enable_params;
    err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
                                                    PERIPHERAL_LINK_COUNT,
                                                    &ble_enable_params);
    APP_ERROR_CHECK(err_code);
    
    //Check the ram settings against the used number of links
    CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT,PERIPHERAL_LINK_COUNT);
    
    // Enable BLE stack.
    err_code = softdevice_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:IOIOI，项目名称:nRF51，代码行数:34，代码来源:main.c


示例2: ble_stack_init

/*
 *  Function for initializing the BLE stack.
 *
 *  Initializes the SoftDevice and the BLE event interrupt.
 *
 *  param[in] init_softdevice  true if SoftDevice should be initialized. 
 *                             The SoftDevice must only  be initialized 
 *                             if a chip reset has occured. Soft reset from 
 *                             application must not reinitialize the SoftDevice.
 */
static void ble_stack_init(bool init_softdevice)
{
    uint32_t         err_code;
    sd_mbr_command_t com = {SD_MBR_COMMAND_INIT_SD, };

    if (init_softdevice)
    {
        err_code = sd_mbr_command(&com);
        APP_ERROR_CHECK(err_code);
    }

    err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START);
    APP_ERROR_CHECK(err_code);

    /* Initialize the SoftDevice handler module. See specific board header file */
    SOFTDEVICE_HANDLER_INIT(LFCLKSRC_OPTION, NULL);

    // Enable BLE stack 
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));
    ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
    err_code = sd_ble_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);

    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:foldedtoad，项目名称:eddystone，代码行数:37，代码来源:main.c


示例3: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 *
 * @param[in] init_softdevice  true if SoftDevice should be initialized. The SoftDevice must only 
 *                             be initialized if a chip reset has occured. Soft reset from 
 *                             application must not reinitialize the SoftDevice.
 */
static void ble_stack_init(bool init_softdevice)
{
    uint32_t         err_code;
    sd_mbr_command_t com = {SD_MBR_COMMAND_INIT_SD, };

    if (init_softdevice)
    {
        err_code = sd_mbr_command(&com);
        APP_ERROR_CHECK(err_code);
    }
    
    err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START);
    APP_ERROR_CHECK(err_code);
   
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, true);

    // Enable BLE stack 
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));
    ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
    err_code = sd_ble_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);
    
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:littledino2112，项目名称:nRF_S130_bootloder，代码行数:34，代码来源:main.c


示例4: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;

    // Initialize the SoftDevice handler module.
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);

    // Enable BLE stack.
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));
#if (defined(S130) || defined(s132))
    ble_enable_params.gatts_enable_params.attr_tab_size   = BLE_GATTS_ATTR_TAB_SIZE_DEFAULT;
#endif
    ble_enable_params.gatts_enable_params.service_changed = false;
#ifdef S120
    ble_enable_params.gap_enable_params.role              = BLE_GAP_ROLE_CENTRAL;
#endif

    err_code = sd_ble_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for System events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:451506709，项目名称:automated_machine，代码行数:33，代码来源:main.c


示例5: SOFTDEVICE_HANDLER_INIT

void BLETransceiver::bleStackInit(void)
{
	uint32_t err_code;

	//RP new sequence initialization
	//https://devzone.nordicsemi.com/question/18132/softdevice-7071-hangs-on-sd_softdevice_enable/

	// Initialize the SoftDevice handler module. Use scheduler
	SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM, USE_EVENT_SCHEDULER);

	//RP new BLE sequence initialization
	//https://devzone.nordicsemi.com/question/18132/softdevice-7071-hangs-on-sd_softdevice_enable/
	// Enable BLE stack
	ble_enable_params_t ble_enable_params;
	memset(&ble_enable_params, 0, sizeof(ble_enable_params));
	ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
	err_code = sd_ble_enable(&ble_enable_params);
	APP_ERROR_CHECK(err_code);

	// Register with the SoftDevice handler module for BLE events.
	err_code = softdevice_ble_evt_handler_set({(ble_evt_cb_t)&bleEvtDispatch, (void*) this});
	APP_ERROR_CHECK(err_code);

	// Register with the SoftDevice handler module for BLE events.
	err_code = softdevice_sys_evt_handler_set(sysEvtDispatch);
	APP_ERROR_CHECK(err_code);
}
开发者ID:Lahorde，项目名称:nrf51_template_application，代码行数:27，代码来源:ble_transceiver.cpp


示例6: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 *
 * @param[in] init_softdevice  true if SoftDevice should be initialized. The SoftDevice must only 
 *                             be initialized if a chip reset has occured. Soft reset from 
 *                             application must not reinitialize the SoftDevice.
 */
static void ble_stack_init(bool init_softdevice)
{
    uint32_t         err_code;
    sd_mbr_command_t com = {SD_MBR_COMMAND_INIT_SD, };

    if (init_softdevice)
    {
        err_code = sd_mbr_command(&com);
        APP_ERROR_CHECK(err_code);
    }
    
    err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START);
    APP_ERROR_CHECK(err_code);
   
    SOFTDEVICE_HANDLER_APPSH_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, true);

    // Enable BLE stack 
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));
    
    // Below code line is needed for s130. For s110 is inrrelevant - but executable
    // can run with both s130 and s110.
    ble_enable_params.gatts_enable_params.attr_tab_size   = BLE_GATTS_ATTR_TAB_SIZE_DEFAULT;

    ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
    err_code = sd_ble_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);
    
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:BlueSkyGjj，项目名称:nRF52，代码行数:39，代码来源:main.c


示例7: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;

    // Initialize the SoftDevice handler module.
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);

    // Enable BLE stack.
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));
#ifdef S130
    ble_enable_params.gatts_enable_params.attr_tab_size   = BLE_GATTS_ATTR_TAB_SIZE_DEFAULT;
#endif	
    ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
    err_code = sd_ble_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:RobinLin，项目名称:Espruino，代码行数:29，代码来源:main.c


示例8: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;

    // Initialize the SoftDevice handler module.
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC, NULL);

#if defined(S110) || defined(S130)
    // Enable BLE stack.
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));
#ifdef S130
    //ble_enable_params.gatts_enable_params.attr_tab_size   = BLE_GATTS_ATTR_TAB_SIZE_MIN;    //これだと自分のATTが出てこなかった
    ble_enable_params.gatts_enable_params.attr_tab_size   = BLE_GATTS_ATTR_TAB_SIZE_MIN;    //これだと自分のATTが出てこなかった
    ble_enable_params.gap_enable_params.periph_conn_count = 1;
#endif
    ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
#ifdef S130
    uint32_t app_ram_base = (uint32_t)m_ble_buf;
    err_code = sd_ble_enable(&ble_enable_params, &app_ram_base);
    APPL_LOG("app_ram_base : %x\n", app_ram_base);
#else
    err_code = sd_ble_enable(&ble_enable_params);
#endif
    APP_ERROR_CHECK(err_code);
#endif

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:hirokuma，项目名称:nrf51822_adctest，代码行数:39，代码来源:main.c


示例9: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;

    nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;

    // Initialize the SoftDevice handler module.
    SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL);

    ble_enable_params_t ble_enable_params;
    err_code = softdevice_enable_get_default_config(NRF_BLE_CENTRAL_LINK_COUNT,
                                                    NRF_BLE_PERIPHERAL_LINK_COUNT,
                                                    &ble_enable_params);
    APP_ERROR_CHECK(err_code);

    // Check the ram settings against the used number of links
    CHECK_RAM_START_ADDR(NRF_BLE_CENTRAL_LINK_COUNT, NRF_BLE_PERIPHERAL_LINK_COUNT);

    // Enable BLE stack.
#if (NRF_SD_BLE_API_VERSION == 3)
    ble_enable_params.gatt_enable_params.att_mtu = NRF_BLE_GATT_MAX_MTU_SIZE;
#endif
    err_code = softdevice_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:NordicSemiconductor，项目名称:nrf51-ADC-examples，代码行数:37，代码来源:main.c


示例10: bleInit

//INIT function that starts up the Softdevice and registers the needed handlers
void bleInit(void){
	u32 err = 0;

    // Initialize the SoftDevice handler with the low frequency clock source
	//And a reference to the previously allocated buffer
	//No event handler is given because the event handling is done in the main loop
	//SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);
    err = softdevice_handler_init(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, currentEventBuffer, sizeOfEvent, NULL);
    APP_ERROR_CHECK(err);

    // Register with the SoftDevice handler module for System events.
    err = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err);

	//FOR THE S130 WE MUST NOW CALL sd_ble_enable() TO ENABLE BLE FUNCTIONALITY
	//Decide if we include the service changed characteristic in our services
	ble_enable_params_t bleSdEnableParams;
    memset(&bleSdEnableParams, 0, sizeof(bleSdEnableParams));
    bleSdEnableParams.gatts_enable_params.attr_tab_size = ATTR_TABLE_MAX_SIZE;
    bleSdEnableParams.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
	err = sd_ble_enable(&bleSdEnableParams);
    APP_ERROR_CHECK(err);

    //Enable DC/DC (needs external LC filter, cmp. nrf51 reference manual page 43)
	err = sd_power_dcdc_mode_set(NRF_POWER_DCDC_ENABLE);
	APP_ERROR_CHECK(err);

	//Set power mode
	err = sd_power_mode_set(NRF_POWER_MODE_LOWPWR);
	APP_ERROR_CHECK(err);
}
开发者ID:fjxgit，项目名称:fruitymesh，代码行数:32，代码来源:Main.cpp


示例11: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;
    
    // Initialize the SoftDevice handler module.
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, false);

    // Enable BLE stack 
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));
    ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
    err_code = sd_ble_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);

    ble_gap_addr_t addr;
    
    err_code = sd_ble_gap_address_get(&addr);
    APP_ERROR_CHECK(err_code);
    sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_NONE, &addr);
    APP_ERROR_CHECK(err_code);
    // Subscribe for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);
    
    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:georgeredinger，项目名称:nrf51-ble-app-lbs，代码行数:32，代码来源:main.c


示例12: softdevice_and_stack_setup

/**@brief Function for ANT stack initialization.
 *
 * @details Initializes the SoftDevice and the ANT+BLE event interrupt.
 */
static void softdevice_and_stack_setup(void)
{
    uint32_t err_code;
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);
    ant_state_indicator_init(m_ant_sdm.channel_number, SDM_SENS_CHANNEL_TYPE);

    // Initialize BLE stack
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));
    ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
    err_code = sd_ble_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);

    // Subscribe for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);
        
    // Subscribe for ANT events.
    err_code = softdevice_ant_evt_handler_set(ant_evt_dispatch);
    APP_ERROR_CHECK(err_code);

#ifdef BONDING_ENABLE
    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
#endif // BONDING_ENABLE
	
	
    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUMBER);
    APP_ERROR_CHECK(err_code);
}
开发者ID:pavarinna，项目名称:AntBleCommunication，代码行数:35，代码来源:main.c


示例13: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;

    // Initialize the SoftDevice handler module.
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);

    // Enable BLE stack.
    ble_enable_params_t ble_enable_params;
    memset(&ble_enable_params, 0, sizeof(ble_enable_params));

    ble_enable_params.gatts_enable_params.service_changed = false;
    ble_enable_params.gap_enable_params.role              = BLE_GAP_ROLE_CENTRAL;

    err_code = sd_ble_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for System events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:tkadom，项目名称:TWBLE，代码行数:29，代码来源:main.c


示例14: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 *
 * @param[in] init_softdevice  true if SoftDevice should be initialized. The SoftDevice must only 
 *                             be initialized if a chip reset has occured. Soft reset from 
 *                             application must not reinitialize the SoftDevice.
 */
static void ble_stack_init(bool init_softdevice)
{
    uint32_t         err_code;
    sd_mbr_command_t com = {SD_MBR_COMMAND_INIT_SD, };
    nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;

    if (init_softdevice)
    {
        err_code = sd_mbr_command(&com);
        APP_ERROR_CHECK(err_code);
    }
    
    err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START);
    APP_ERROR_CHECK(err_code);
   
    SOFTDEVICE_HANDLER_APPSH_INIT(&clock_lf_cfg, true);

    // Enable BLE stack.
    ble_enable_params_t ble_enable_params;
    // Only one connection as a central is used when performing dfu.
    err_code = softdevice_enable_get_default_config(1, 1, &ble_enable_params);
    APP_ERROR_CHECK(err_code);

    ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
    err_code = softdevice_enable(&ble_enable_params);
    APP_ERROR_CHECK(err_code);
    
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:vincent290587，项目名称:nRF5x_bootloader，代码行数:38，代码来源:main.c


示例15: jshInit

void jshInit() {
  jshInitDevices();
  nrf_utils_lfclk_config_and_start();

  BITFIELD_CLEAR(jshPinSoftPWM);
    
  JshUSARTInfo inf;
  jshUSARTInitInfo(&inf);
  inf.pinRX = DEFAULT_CONSOLE_RX_PIN;
  inf.pinTX = DEFAULT_CONSOLE_TX_PIN;
  inf.baudRate = DEFAULT_CONSOLE_BAUDRATE;
  jshUSARTSetup(EV_SERIAL1, &inf); // Initialize UART for communication with Espruino/terminal.
  init = 1;

  // Enable and sort out the timer
  nrf_timer_mode_set(NRF_TIMER1,NRF_TIMER_MODE_TIMER);
  nrf_timer_bit_width_set(NRF_TIMER1, NRF_TIMER_BIT_WIDTH_32);
  nrf_timer_frequency_set(NRF_TIMER1, NRF_TIMER_FREQ_1MHz); // hmm = only a few options here

  // Irq setup
  NVIC_SetPriority(TIMER1_IRQn, 3); // low - don't mess with BLE :)
  NVIC_ClearPendingIRQ(TIMER1_IRQn);
  NVIC_EnableIRQ(TIMER1_IRQn);
  nrf_timer_int_enable(NRF_TIMER1, NRF_TIMER_INT_COMPARE0_MASK );

  // Pin change
  nrf_drv_gpiote_init();
  jswrap_nrf_bluetooth_init();
  
  // Softdevice is initialised now
  softdevice_sys_evt_handler_set(sys_evt_handler);
}
开发者ID:DonjetaE，项目名称:Espruino，代码行数:32，代码来源:jshardware.c


示例16: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;
    ble_gap_addr_t addr;
    ble_enable_params_t enableParams;

    // Initialize the SoftDevice handler module.
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM, false);

    // Enable BLE stack
    enableParams.gatts_enable_params.service_changed = 1;
    sd_ble_enable(&enableParams);

    // Workaround S110 7.0.0 bug
    sd_ble_gap_address_get(&addr);
    sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_NONE, &addr);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    APP_ERROR_CHECK(err_code);

    // Register with the SoftDevice handler module for BLE events.
    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:Veerachart，项目名称:crazyflie2-nrf-firmware，代码行数:29，代码来源:ble.c


示例17: btle_init

error_t btle_init(void)
{
    nrf_clock_lf_cfg_t clockConfiguration;

    // Configure the LF clock according to values provided by btle_clock.h.
    // It is input from the chain of the yotta configuration system.
    clockConfiguration.source        = LFCLK_CONF_SOURCE;
    clockConfiguration.xtal_accuracy = LFCLK_CONF_ACCURACY;
    clockConfiguration.rc_ctiv       = LFCLK_CONF_RC_CTIV;
    clockConfiguration.rc_temp_ctiv  = LFCLK_CONF_RC_TEMP_CTIV;

    SOFTDEVICE_HANDLER_INIT(&clockConfiguration, signalEvent);

    // Enable BLE stack
    /**
     * Using this call, the application can select whether to include the
     * Service Changed characteristic in the GATT Server. The default in all
     * previous releases has been to include the Service Changed characteristic,
     * but this affects how GATT clients behave. Specifically, it requires
     * clients to subscribe to this attribute and not to cache attribute handles
     * between connections unless the devices are bonded. If the application
     * does not need to change the structure of the GATT server attributes at
     * runtime this adds unnecessary complexity to the interaction with peer
     * clients. If the SoftDevice is enabled with the Service Changed
     * Characteristics turned off, then clients are allowed to cache attribute
     * handles making applications simpler on both sides.
     */
    static const bool IS_SRVC_CHANGED_CHARACT_PRESENT = true;

    ble_enable_params_t ble_enable_params;
    uint32_t err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
                                                    PERIPHERAL_LINK_COUNT,
                                                    &ble_enable_params);

    ble_enable_params.gatts_enable_params.attr_tab_size  = GATTS_ATTR_TAB_SIZE;
    ble_enable_params.gatts_enable_params.service_changed  = IS_SRVC_CHANGED_CHARACT_PRESENT;
    ble_enable_params.common_enable_params.vs_uuid_count = UUID_TABLE_MAX_ENTRIES;

    if(err_code  != NRF_SUCCESS) {
        return ERROR_INVALID_PARAM;
    }

    if (softdevice_enable(&ble_enable_params) != NRF_SUCCESS) {
        return ERROR_INVALID_PARAM;
    }

    ble_gap_addr_t addr;
    if (sd_ble_gap_address_get(&addr) != NRF_SUCCESS) {
        return ERROR_INVALID_PARAM;
    }
    if (sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_NONE, &addr) != NRF_SUCCESS) {
        return ERROR_INVALID_PARAM;
    }

    ASSERT_STATUS( softdevice_ble_evt_handler_set(btle_handler));
    ASSERT_STATUS( softdevice_sys_evt_handler_set(sys_evt_dispatch));

    return btle_gap_init();
}
开发者ID:AlessandroA，项目名称:mbed，代码行数:59，代码来源:btle.cpp


示例18: ble_stack_init

/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    uint32_t err_code;
    
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, true);

    err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
    APP_ERROR_CHECK(err_code);
}
开发者ID:yesj，项目名称:Project_sc002，代码行数:13，代码来源:main.c


示例19: ble_stack_init

static void ble_stack_init(void)
{
  uint32_t err_code;
  ble_gap_conn_sec_mode_t sec_mode;
  uint8_t* tstr;
  uint8_t cksum;
  int i;
  
  // Initialize the SoftDevice handler module.
	if(BOARD_CONFIG_VALUE_ENABLE == UICR_board_config_information->LFCLKSRC_EN)
	{//user config
		SOFTDEVICE_HANDLER_INIT(UICR_board_config_information->LFCLKSRC, false);
	}
	else
	{//default
		SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_RC_250_PPM_TEMP_16000MS_CALIBRATION, false);
	}
	
  // Enable BLE stack 
  ble_enable_params_t ble_enable_params;
  memset(&ble_enable_params, 0, sizeof(ble_enable_params));
  ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
  ble_enable_params.gatts_enable_params.attr_tab_size = 512;
  err_code = sd_ble_enable(&ble_enable_params);
  APP_ERROR_CHECK(err_code);

  // Register with the SoftDevice handler module for BLE events.
  err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
  APP_ERROR_CHECK(err_code);
  
  // Register with the SoftDevice handler module for BLE events.
  err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
  APP_ERROR_CHECK(err_code);

  sd_ble_gap_address_get(&base_addr);
  hash128(base_addr.addr, 6, device_id);

  base_addr.addr_type = BLE_GAP_ADDR_TYPE_RANDOM_STATIC;

  tstr = __TIME__;
  cksum = 0;
  for (i=0; i<strlen(__TIME__); i++) {
      cksum += tstr[i];
  }

  base_addr.addr[0] += cksum;
  sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_NONE, &base_addr);

  BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

  err_code = sd_ble_gap_device_name_set(&sec_mode,
                                        (const uint8_t *)device_name,
                                        strlen(device_name));
  APP_ERROR_CHECK(err_code);
}
开发者ID:JUMA-IO，项目名称:nRF51_Platform，代码行数:55，代码来源:device_main.c


示例20: btle_init

error_t btle_init(void)
{
    const bool useScheduler = false;
#ifdef TARGET_HRM1017
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_RC_250_PPM_4000MS_CALIBRATION, useScheduler);
#else
    SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, useScheduler);
#endif

    // Enable BLE stack
    /**
     * Using this call, the application can select whether to include the
     * Service Changed characteristic in the GATT Server. The default in all
     * previous releases has been to include the Service Changed characteristic,
     * but this affects how GATT clients behave. Specifically, it requires
     * clients to subscribe to this attribute and not to cache attribute handles
     * between connections unless the devices are bonded. If the application
     * does not need to change the structure of the GATT server attributes at
     * runtime this adds unnecessary complexity to the interaction with peer
     * clients. If the SoftDevice is enabled with the Service Changed
     * Characteristics turned off, then clients are allowed to cache attribute
     * handles making applications simpler on both sides.
     */
    static const bool IS_SRVC_CHANGED_CHARACT_PRESENT = true;
    ble_enable_params_t enableParams = {
        .gatts_enable_params = {
            .service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT
        }
    };
    if (sd_ble_enable(&enableParams) != NRF_SUCCESS) {
        return ERROR_INVALID_PARAM;
    }

    ble_gap_addr_t addr;
    if (sd_ble_gap_address_get(&addr) != NRF_SUCCESS) {
        return ERROR_INVALID_PARAM;
    }
    if (sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_NONE, &addr) != NRF_SUCCESS) {
        return ERROR_INVALID_PARAM;
    }

    ASSERT_STATUS( softdevice_ble_evt_handler_set(btle_handler));
    ASSERT_STATUS( softdevice_sys_evt_handler_set(sys_evt_dispatch));

#if NEED_BOND_MANAGER /* disabled by default */
    bond_manager_init();
#endif
    btle_gap_init();

    return ERROR_NONE;
}
开发者ID:ProfeC，项目名称:arduino，代码行数:51，代码来源:btle.cpp



注：本文中的softdevice_sys_evt_handler_set函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ softfloat_raiseFlags函数代码示例发布时间：2022-05-30
下一篇：
C++ soft_restart函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap