C++ snd_soc_dapm_nc_pin函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中snd_soc_dapm_nc_pin函数的典型用法代码示例。如果您正苦于以下问题：C++ snd_soc_dapm_nc_pin函数的具体用法？C++ snd_soc_dapm_nc_pin怎么用？C++ snd_soc_dapm_nc_pin使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了snd_soc_dapm_nc_pin函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rx51_aic34_init

static int rx51_aic34_init(struct snd_soc_codec *codec)
{
	int err;

	/* Set up NC codec pins */
	snd_soc_dapm_nc_pin(codec, "MIC3L");
	snd_soc_dapm_nc_pin(codec, "MIC3R");
	snd_soc_dapm_nc_pin(codec, "LINE1R");

	/* Add RX-51 specific controls */
	err = snd_soc_add_controls(codec, aic34_rx51_controls,
				   ARRAY_SIZE(aic34_rx51_controls));
	if (err < 0)
		return err;

	/* Add RX-51 specific widgets */
	snd_soc_dapm_new_controls(codec, aic34_dapm_widgets,
				  ARRAY_SIZE(aic34_dapm_widgets));

	/* Set up RX-51 specific audio path audio_map */
	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));

	snd_soc_dapm_sync(codec);

	return 0;
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:26，代码来源:rx51.c

示例2: hx4700_ak4641_init

static int hx4700_ak4641_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;
	int err;

	
	
	snd_soc_dapm_nc_pin(dapm, "MOUT1");
	snd_soc_dapm_nc_pin(dapm, "MICEXT");
	snd_soc_dapm_nc_pin(dapm, "AUX");

	
	err = snd_soc_jack_new(codec, "Headphone Jack",
				SND_JACK_HEADPHONE, &hs_jack);
	if (err)
		return err;

	err = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pin),
					hs_jack_pin);
	if (err)
		return err;

	err = snd_soc_jack_add_gpios(&hs_jack, 1, &hs_jack_gpio);

	return err;
}

开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:27，代码来源:hx4700.c

示例3: magician_uda1380_init

/*
 * Logic for a uda1380 as connected on a HTC Magician
 */
static int magician_uda1380_init(struct snd_soc_codec *codec)
{
	int err;

	/* NC codec pins */
	snd_soc_dapm_nc_pin(codec, "VOUTLHP");
	snd_soc_dapm_nc_pin(codec, "VOUTRHP");

	/* FIXME: is anything connected here? */
	snd_soc_dapm_nc_pin(codec, "VINL");
	snd_soc_dapm_nc_pin(codec, "VINR");

	/* Add magician specific controls */
	err = snd_soc_add_controls(codec, uda1380_magician_controls,
				ARRAY_SIZE(uda1380_magician_controls));
	if (err < 0)
		return err;

	/* Add magician specific widgets */
	snd_soc_dapm_new_controls(codec, uda1380_dapm_widgets,
				  ARRAY_SIZE(uda1380_dapm_widgets));

	/* Set up magician specific audio path interconnects */
	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));

	snd_soc_dapm_sync(codec);
	return 0;
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:31，代码来源:magician.c

示例4: hx4700_ak4641_init

/*
 * Logic for a ak4641 as connected on a HP iPAQ hx4700
 */
static int hx4700_ak4641_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;
	int err;

	/* NC codec pins */
	/* FIXME: is anything connected here? */
	snd_soc_dapm_nc_pin(dapm, "MOUT1");
	snd_soc_dapm_nc_pin(dapm, "MICEXT");
	snd_soc_dapm_nc_pin(dapm, "AUX");

	/* Jack detection API stuff */
	err = snd_soc_jack_new(codec, "Headphone Jack",
				SND_JACK_HEADPHONE, &hs_jack);
	if (err)
		return err;

	err = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pin),
					hs_jack_pin);
	if (err)
		return err;

	err = snd_soc_jack_add_gpios(&hs_jack, 1, &hs_jack_gpio);

	return err;
}

开发者ID:3null，项目名称:linux，代码行数:30，代码来源:hx4700.c

示例5: mini210_wm8960_init

static int mini210_wm8960_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;

	snd_soc_dapm_nc_pin(dapm, "RINPUT1");
	snd_soc_dapm_nc_pin(dapm, "LINPUT2");
	snd_soc_dapm_nc_pin(dapm, "RINPUT2");
	snd_soc_dapm_nc_pin(dapm, "OUT3");
	snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_cpt,
			ARRAY_SIZE(wm8960_dapm_widgets_cpt));
	snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_cpt2,
			ARRAY_SIZE(wm8960_dapm_widgets_cpt2));

	snd_soc_dapm_add_routes(dapm, audio_map_tx, ARRAY_SIZE(audio_map_tx));

	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
	snd_soc_dapm_enable_pin(dapm, "Mic Jack");
	snd_soc_dapm_enable_pin(dapm, "Speaker_L");
	snd_soc_dapm_enable_pin(dapm, "Speaker_R");
	snd_soc_dapm_enable_pin(dapm, "Line Input 3 (FM)");

	snd_soc_dapm_sync(dapm);
	return 0;
}

开发者ID:abc2402878，项目名称:linux-tiny210v2，代码行数:25，代码来源:mini210_wm8960.c

示例6: rt5631_codec_init

static int rt5631_codec_init(struct snd_soc_pcm_runtime *rtd)
{
    struct snd_soc_codec *codec = rtd->codec;
    //struct snd_soc_dai *codec_dai = rtd->codec_dai;
    struct snd_soc_dapm_context *dapm = &codec->dapm;
    int ret = 0;

    printk(KERN_DEBUG "enter %s rt5631_snd_pdata: %p\n", __func__, rt5631_snd_pdata);

    /* Add specific widgets */
    snd_soc_dapm_new_controls(dapm, rt5631_dapm_widgets,
                  ARRAY_SIZE(rt5631_dapm_widgets));
    /* Set up specific audio path interconnects */
    snd_soc_dapm_add_routes(dapm, rt5631_dapm_intercon, ARRAY_SIZE(rt5631_dapm_intercon));

    /* Setup spk/hp/mono output */
  //  rt5631_set_output(codec);

    /* Setuo mic input */
  //  rt5631_set_input(codec);

    /* not connected */
    snd_soc_dapm_nc_pin(dapm, "MONO");
    snd_soc_dapm_nc_pin(dapm, "AUXO2");

    snd_soc_dapm_nc_pin(dapm, "DMIC");
    snd_soc_dapm_nc_pin(dapm, "AXIL");
    snd_soc_dapm_nc_pin(dapm, "AXIR");

    /* always connected */
    snd_soc_dapm_enable_pin(dapm, "Ext Spk");
	snd_soc_dapm_enable_pin(dapm, "MAIN MIC");

    /* disable connected */
    snd_soc_dapm_disable_pin(dapm, "HP");

    snd_soc_dapm_sync(dapm);

#if HP_DET
    ret = snd_soc_jack_new(codec, "hp switch", SND_JACK_HEADPHONE, &rt5631_snd_priv->jack);
    if (ret) {
        printk(KERN_WARNING "Failed to alloc resource for hp switch\n");
    } else {
        ret = snd_soc_jack_add_pins(&rt5631_snd_priv->jack, ARRAY_SIZE(jack_pins), jack_pins);
        if (ret) {
            printk(KERN_WARNING "Failed to setup hp pins\n");
        }
    }
    rt5631_snd_priv->data= (void*)codec;

    init_timer(&rt5631_snd_priv->timer);
    rt5631_snd_priv->timer.function = rt5631_timer_func;
    rt5631_snd_priv->timer.data = (unsigned long)rt5631_snd_priv;

    INIT_WORK(&rt5631_snd_priv->work, rt5631_work_func);
    mutex_init(&rt5631_snd_priv->lock);
#endif

    return 0;
}

开发者ID:nspierbundel，项目名称:amlogic-common-3.0.8，代码行数:60，代码来源:aml_m6_rt5631.c

示例7: rt5631_set_output

static void rt5631_set_output(struct snd_soc_codec *codec)
{
    struct snd_soc_dapm_context *dapm = &codec->dapm;

    if (rt5631_snd_pdata->spk_output != RT5631_SPK_STEREO) {
        if (rt5631_snd_pdata->spk_output == RT5631_SPK_RIGHT) {
            snd_soc_dapm_nc_pin(dapm, "SPOL");

            snd_soc_update_bits(codec, RT5631_SPK_MONO_OUT_CTRL,
                0xf000,
                RT5631_M_SPKVOL_L_TO_SPOL_MIXER | RT5631_M_SPKVOL_R_TO_SPOL_MIXER);
        } else {
            snd_soc_dapm_nc_pin(dapm, "SPOR");

            snd_soc_update_bits(codec, RT5631_SPK_MONO_OUT_CTRL,
                0xf000,
                RT5631_M_SPKVOL_L_TO_SPOR_MIXER | RT5631_M_SPKVOL_R_TO_SPOR_MIXER);
        }

        snd_soc_update_bits(codec, RT5631_SPK_MONO_HP_OUT_CTRL,
            RT5631_SPK_L_MUX_SEL_MASK | RT5631_SPK_R_MUX_SEL_MASK | RT5631_HP_L_MUX_SEL_MASK | RT5631_HP_R_MUX_SEL_MASK,
            RT5631_SPK_L_MUX_SEL_SPKMIXER_L | RT5631_SPK_R_MUX_SEL_SPKMIXER_R | RT5631_HP_L_MUX_SEL_HPVOL_L | RT5631_HP_R_MUX_SEL_HPVOL_R);
    } else {
        snd_soc_update_bits(codec, RT5631_SPK_MONO_OUT_CTRL,
            0xf000,
            RT5631_M_SPKVOL_R_TO_SPOL_MIXER | RT5631_M_SPKVOL_L_TO_SPOR_MIXER);

        snd_soc_update_bits(codec, RT5631_SPK_MONO_HP_OUT_CTRL,
            RT5631_SPK_L_MUX_SEL_MASK | RT5631_SPK_R_MUX_SEL_MASK | RT5631_HP_L_MUX_SEL_MASK | RT5631_HP_R_MUX_SEL_MASK,
            RT5631_SPK_L_MUX_SEL_SPKMIXER_L | RT5631_SPK_R_MUX_SEL_SPKMIXER_R | RT5631_HP_L_MUX_SEL_HPVOL_L | RT5631_HP_R_MUX_SEL_HPVOL_R);
    }
}

开发者ID:nspierbundel，项目名称:amlogic-common-3.0.8，代码行数:32，代码来源:aml_m6_rt5631.c

示例8: at91sam9g20ek_wm8731_init

/*
 * Logic for a wm8731 as connected on a at91sam9g20ek board.
 */
static int at91sam9g20ek_wm8731_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dai *codec_dai = rtd->codec_dai;
	struct snd_soc_dapm_context *dapm = &codec->dapm;
	int ret;

	printk(KERN_DEBUG
			"at91sam9g20ek_wm8731 "
			": at91sam9g20ek_wm8731_init() called\n");

	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_MCLK,
		MCLK_RATE, SND_SOC_CLOCK_IN);
	if (ret < 0) {
		printk(KERN_ERR "Failed to set WM8731 SYSCLK: %d\n", ret);
		return ret;
	}

	/* not connected */
	snd_soc_dapm_nc_pin(dapm, "RLINEIN");
	snd_soc_dapm_nc_pin(dapm, "LLINEIN");

#ifndef ENABLE_MIC_INPUT
	snd_soc_dapm_nc_pin(&rtd->card->dapm, "Int Mic");
#endif

	return 0;
}

开发者ID:19Dan01，项目名称:linux，代码行数:31，代码来源:sam9g20_wm8731.c

示例9: tosa_ac97_init

static int tosa_ac97_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;
	int err;

	snd_soc_dapm_nc_pin(dapm, "OUT3");
	snd_soc_dapm_nc_pin(dapm, "MONOOUT");

	/* add tosa specific controls */
	err = snd_soc_add_controls(codec, tosa_controls,
				ARRAY_SIZE(tosa_controls));
	if (err < 0)
		return err;

	/* add tosa specific widgets */
	snd_soc_dapm_new_controls(dapm, tosa_dapm_widgets,
				  ARRAY_SIZE(tosa_dapm_widgets));

	/* set up tosa specific audio path audio_map */
	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));

	snd_soc_dapm_sync(dapm);
	return 0;
}

开发者ID:1yankeedt，项目名称:D710BST_FL24_Kernel，代码行数:25，代码来源:tosa.c

示例10: smdk4x12_wm8960_init

static int smdk4x12_wm8960_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;

	dprintk("+%s()\n", __FUNCTION__);

	snd_soc_dapm_nc_pin(dapm, "RINPUT1");
	snd_soc_dapm_nc_pin(dapm, "LINPUT2");
	snd_soc_dapm_nc_pin(dapm, "RINPUT2");
	snd_soc_dapm_nc_pin(dapm, "OUT3");
	
	snd_soc_dapm_new_controls(dapm, smdk4x12_dapm_capture_widgets, ARRAY_SIZE(smdk4x12_dapm_capture_widgets));
	snd_soc_dapm_new_controls(dapm, smdk4x12_dapm_playback_widgets, ARRAY_SIZE(smdk4x12_dapm_playback_widgets));

	snd_soc_dapm_add_routes(dapm, smdk4x12_audio_map, ARRAY_SIZE(smdk4x12_audio_map));

	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
	snd_soc_dapm_enable_pin(dapm, "Mic Jack");
	snd_soc_dapm_enable_pin(dapm, "Speaker_L");
	snd_soc_dapm_enable_pin(dapm, "Speaker_R");
	
	snd_soc_dapm_disable_pin(dapm, "Line Input 3 (FM)");

	dprintk("*%s(): dapm sync start\n", __FUNCTION__);
	snd_soc_dapm_sync( dapm );
	dprintk("*%s(): dapm sync end\n", __FUNCTION__);

	dprintk("-%s()\n", __FUNCTION__);
	
	return 0;
}

开发者ID:TOPEET-Develop，项目名称:iTop4412_kernel_public_merge，代码行数:32，代码来源:smdk_wm8960.c

示例11: smartq_wm8987_init

static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
	int err = 0;

	/* set endpoints to not connected */
	snd_soc_dapm_nc_pin(dapm, "LINPUT1");
	snd_soc_dapm_nc_pin(dapm, "RINPUT1");
	snd_soc_dapm_nc_pin(dapm, "OUT3");
	snd_soc_dapm_nc_pin(dapm, "ROUT1");

	/* Headphone jack detection */
	err = snd_soc_card_jack_new(rtd->card, "Headphone Jack",
				    SND_JACK_HEADPHONE, &smartq_jack,
				    smartq_jack_pins,
				    ARRAY_SIZE(smartq_jack_pins));
	if (err)
		return err;

	err = snd_soc_jack_add_gpios(&smartq_jack,
				     ARRAY_SIZE(smartq_jack_gpios),
				     smartq_jack_gpios);

	return err;
}

开发者ID:Chong-Li，项目名称:cse522，代码行数:25，代码来源:smartq_wm8987.c

示例12: rk2818_wm8988_init

/*
 * Logic for a wm8988 as connected on a rockchip board.
 */
static int rk2818_wm8988_init(struct snd_soc_codec *codec)
{
	struct snd_soc_dai *codec_dai = &codec->dai[0];
	int ret;
	  
    DBG("Enter::%s----%d\n",__FUNCTION__,__LINE__);
    
    ret = snd_soc_dai_set_sysclk(codec_dai, 0,
		12000000, SND_SOC_CLOCK_IN);
	if (ret < 0) {
		printk(KERN_ERR "Failed to set WM8988 SYSCLK: %d\n", ret);
		return ret;
	}
	
    /* Add specific widgets */
	snd_soc_dapm_new_controls(codec, rk2818_dapm_widgets,
				  ARRAY_SIZE(rk2818_dapm_widgets));
  	snd_soc_dapm_nc_pin(codec, "LOUT2");
	snd_soc_dapm_nc_pin(codec, "ROUT2");
	
    /* Set up specific audio path audio_mapnects */
    snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
       
    snd_soc_dapm_sync(codec);
 
    return 0;
}

开发者ID:smartassfox，项目名称:android_kernel_p81hd，代码行数:30，代码来源:rk29_wm8988.c

示例13: evm_aic3x_init

/* Logic for a aic3x as connected on a davinci-evm */
static int evm_aic3x_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_card *card = rtd->card;
	struct device_node *np = card->dev->of_node;
	int ret;

	/* Add davinci-evm specific widgets */
	snd_soc_dapm_new_controls(&card->dapm, aic3x_dapm_widgets,
				  ARRAY_SIZE(aic3x_dapm_widgets));

	if (np) {
		ret = snd_soc_of_parse_audio_routing(card, "ti,audio-routing");
		if (ret)
			return ret;
	} else {
		/* Set up davinci-evm specific audio path audio_map */
		snd_soc_dapm_add_routes(&card->dapm, audio_map,
					ARRAY_SIZE(audio_map));
	}

	/* not connected */
	snd_soc_dapm_nc_pin(&card->dapm, "MONO_LOUT");
	snd_soc_dapm_nc_pin(&card->dapm, "HPLCOM");
	snd_soc_dapm_nc_pin(&card->dapm, "HPRCOM");

	return 0;
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:28，代码来源:davinci-evm.c

示例14: poodle_wm8731_init

/*
 * Logic for a wm8731 as connected on a Sharp SL-C7x0 Device
 */
static int poodle_wm8731_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	int err;

	snd_soc_dapm_nc_pin(codec, "LLINEIN");
	snd_soc_dapm_nc_pin(codec, "RLINEIN");
	snd_soc_dapm_enable_pin(codec, "MICIN");

	/* Add poodle specific controls */
	err = snd_soc_add_controls(codec, wm8731_poodle_controls,
				ARRAY_SIZE(wm8731_poodle_controls));
	if (err < 0)
		return err;

	/* Add poodle specific widgets */
	snd_soc_dapm_new_controls(codec, wm8731_dapm_widgets,
				  ARRAY_SIZE(wm8731_dapm_widgets));

	/* Set up poodle specific audio path audio_map */
	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));

	snd_soc_dapm_sync(codec);
	return 0;
}

开发者ID:Ale1ster，项目名称:kerneldir，代码行数:28，代码来源:poodle.c

示例15: neo1973_wm8753_init

static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_card *card = rtd->card;

	/* set up NC codec pins */
	snd_soc_dapm_nc_pin(&codec->dapm, "OUT3");
	snd_soc_dapm_nc_pin(&codec->dapm, "OUT4");
	snd_soc_dapm_nc_pin(&codec->dapm, "LINE1");
	snd_soc_dapm_nc_pin(&codec->dapm, "LINE2");

	/* set endpoints to default off mode */
	snd_soc_dapm_disable_pin(&card->dapm, "GSM Line Out");
	snd_soc_dapm_disable_pin(&card->dapm, "GSM Line In");
	snd_soc_dapm_disable_pin(&card->dapm, "Headset Mic");
	snd_soc_dapm_disable_pin(&card->dapm, "Handset Mic");
	snd_soc_dapm_disable_pin(&card->dapm, "Stereo Out");
	snd_soc_dapm_disable_pin(&card->dapm, "Handset Spk");

	/* allow audio paths from the GSM modem to run during suspend */
	snd_soc_dapm_ignore_suspend(&card->dapm, "GSM Line Out");
	snd_soc_dapm_ignore_suspend(&card->dapm, "GSM Line In");
	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
	snd_soc_dapm_ignore_suspend(&card->dapm, "Handset Mic");
	snd_soc_dapm_ignore_suspend(&card->dapm, "Stereo Out");
	snd_soc_dapm_ignore_suspend(&card->dapm, "Handset Spk");

	return 0;
}

开发者ID:908626950，项目名称:linux，代码行数:29，代码来源:neo1973_wm8753.c

示例16: omap3pandora_out_init

static int omap3pandora_out_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;
	int ret;

	/* All TWL4030 output pins are floating */
	snd_soc_dapm_nc_pin(dapm, "EARPIECE");
	snd_soc_dapm_nc_pin(dapm, "PREDRIVEL");
	snd_soc_dapm_nc_pin(dapm, "PREDRIVER");
	snd_soc_dapm_nc_pin(dapm, "HSOL");
	snd_soc_dapm_nc_pin(dapm, "HSOR");
	snd_soc_dapm_nc_pin(dapm, "CARKITL");
	snd_soc_dapm_nc_pin(dapm, "CARKITR");
	snd_soc_dapm_nc_pin(dapm, "HFL");
	snd_soc_dapm_nc_pin(dapm, "HFR");
	snd_soc_dapm_nc_pin(dapm, "VIBRA");

	ret = snd_soc_dapm_new_controls(dapm, omap3pandora_out_dapm_widgets,
				ARRAY_SIZE(omap3pandora_out_dapm_widgets));
	if (ret < 0)
		return ret;

	return snd_soc_dapm_add_routes(dapm, omap3pandora_out_map,
		ARRAY_SIZE(omap3pandora_out_map));
}

开发者ID:AiWinters，项目名称:linux，代码行数:26，代码来源:omap3pandora.c

示例17: aml_m1_codec_init

static int aml_m1_codec_init(struct snd_soc_codec *codec)
{
    struct snd_soc_card *card = codec->socdev->card;

    int err;
    //Add board specific DAPM widgets and routes
    err = snd_soc_dapm_new_controls(codec, aml_m1_dapm_widgets, ARRAY_SIZE(aml_m1_dapm_widgets));
    if(err){
        dev_warn(card->dev, "Failed to register DAPM widgets\n");
        return 0;
    }

    err = snd_soc_dapm_add_routes(codec, intercon,
        ARRAY_SIZE(intercon));
    if(err){
        dev_warn(card->dev, "Failed to setup dapm widgets routine\n");
        return 0;
    }

#if HP_DET
    if ((soc_cs42l52_dai.ac97_pdata) && ((struct cs42l52_platform_data *) (soc_cs42l52_dai.ac97_pdata))->is_hp_pluged)
        hp_detect_flag = ((struct cs42l52_platform_data *) (soc_cs42l52_dai.ac97_pdata))->is_hp_pluged() ? (0) : (1);
    else
        hp_detect_flag = 1; // If is_hp_pluged function is not registered in bsp, set speaker as default.

    err = snd_soc_jack_new(card, "hp_switch",
        SND_JACK_HEADSET, &hp_jack);
    if(err){
        dev_warn(card->dev, "Failed to alloc resource for hook switch\n");
    }else{
        err = snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins), hp_jack_pins);
        if(err){
            dev_warn(card->dev, "Failed to setup hook hp jack pin\n");
        }
    }

    // create a timer to poll the HP IN status
    spin_lock_init(&lock);
    timer.function = &cs42l52_hp_detect_timer;
    timer.data = (unsigned long)codec;
    timer.expires = jiffies + HZ*10;
    init_timer(&timer);
    INIT_WORK(&cs42l52_work.cs42l52_workqueue, cs42l52_hp_detect_queue);
#endif

    snd_soc_dapm_nc_pin(codec,"LINPUT1");
    snd_soc_dapm_nc_pin(codec,"RINPUT1");

    snd_soc_dapm_enable_pin(codec, "Ext Spk");
    snd_soc_dapm_disable_pin(codec, "HP");
    snd_soc_dapm_enable_pin(codec, "MIC IN");
    snd_soc_dapm_disable_pin(codec, "HP MIC");
    snd_soc_dapm_disable_pin(codec, "FM IN");

    snd_soc_dapm_sync(codec);

    return 0;
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel-m3，代码行数:58，代码来源:aml_m1_mid_cs42l52.c

示例18: corgi_wm8731_init

/*
 * Logic for a wm8731 as connected on a Sharp SL-C7x0 Device
 */
static int corgi_wm8731_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;

	snd_soc_dapm_nc_pin(dapm, "LLINEIN");
	snd_soc_dapm_nc_pin(dapm, "RLINEIN");

	return 0;
}

开发者ID:3null，项目名称:linux，代码行数:13，代码来源:corgi.c

示例19: omap4_wm8994_init

int omap4_wm8994_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;
	struct snd_soc_dai *aif1_dai = &rtd->codec_dai[0];
	int ret;

	the_codec = codec;

	ret = snd_soc_add_controls(codec, omap4_controls,
				ARRAY_SIZE(omap4_controls));

	ret = snd_soc_dapm_new_controls(dapm, omap4_dapm_widgets,
					ARRAY_SIZE(omap4_dapm_widgets));
	if (ret != 0)
		dev_err(codec->dev, "Failed to add DAPM widgets: %d\n", ret);

	ret = snd_soc_dapm_add_routes(dapm, omap4_dapm_routes,
					ARRAY_SIZE(omap4_dapm_routes));
	if (ret != 0)
		dev_err(codec->dev, "Failed to add DAPM routes: %d\n", ret);

	/* set up NC codec pins */
	snd_soc_dapm_nc_pin(dapm, "IN2LP:VXRN");
	snd_soc_dapm_nc_pin(dapm, "IN2LN");
#ifdef CONFIG_MACH_SAMSUNG_ESPRESSO_10
	snd_soc_dapm_nc_pin(dapm, "IN2RP:VXRP");
	snd_soc_dapm_nc_pin(dapm, "IN2RN");
#endif

	snd_soc_dapm_ignore_suspend(dapm, "RCV");
	snd_soc_dapm_ignore_suspend(dapm, "SPK");
	snd_soc_dapm_ignore_suspend(dapm, "LINEOUT");
	snd_soc_dapm_ignore_suspend(dapm, "HP");
	snd_soc_dapm_ignore_suspend(dapm, "Main Mic");
#if defined(CONFIG_MACH_SAMSUNG_ESPRESSO) \
	|| defined(CONFIG_MACH_SAMSUNG_ESPRESSO_CHN_CMCC)
	snd_soc_dapm_ignore_suspend(dapm, "Sub Mic");
#endif
	snd_soc_dapm_ignore_suspend(dapm, "Headset Mic");
	snd_soc_dapm_ignore_suspend(dapm, "AIF1DACDAT");
	snd_soc_dapm_ignore_suspend(dapm, "AIF2DACDAT");
	snd_soc_dapm_ignore_suspend(dapm, "AIF3DACDAT");
	snd_soc_dapm_ignore_suspend(dapm, "AIF1ADCDAT");
	snd_soc_dapm_ignore_suspend(dapm, "AIF2ADCDAT");
	snd_soc_dapm_ignore_suspend(dapm, "AIF3ADCDAT");

	ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2,
				     32768, SND_SOC_CLOCK_IN);
	if (ret < 0)
		dev_err(codec->dev, "Failed to boot clocking\n");

	return snd_soc_dapm_sync(dapm);
}

开发者ID:nickh186，项目名称:Samsung-GT-P3113-AOSP-CM-Kernel-and-Ramdisk，代码行数:54，代码来源:omap_wm8994.c

示例20: zoom2_twl4030_init

static int zoom2_twl4030_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	int ret;
	unsigned short reg;

	g_rtd = rtd;

	/* Add ZOOM2 specific controls */
	ret = snd_soc_add_controls(codec, zoom2_controls,
			ARRAY_SIZE(zoom2_controls));
	if (ret)
		return ret;

	/* Add Zoom2 specific widgets */
	ret = snd_soc_dapm_new_controls(codec->dapm, zoom2_twl4030_dapm_widgets,
				ARRAY_SIZE(zoom2_twl4030_dapm_widgets));
	if (ret)
		return ret;

	/* Set up Zoom2 specific audio path audio_map */
	snd_soc_dapm_add_routes(codec->dapm, audio_map, ARRAY_SIZE(audio_map));

	reg = codec->driver->read(codec, TWL4030_REG_VOICE_IF);
	reg |= TWL4030_VIF_DIN_EN | TWL4030_VIF_DOUT_EN | TWL4030_VIF_EN;
	codec->driver->write(codec, TWL4030_REG_VOICE_IF, reg);

	/* Zoom2 connected pins */
	snd_soc_dapm_enable_pin(codec->dapm, "Ext Mic");
	snd_soc_dapm_enable_pin(codec->dapm, "Ext Spk");
	snd_soc_dapm_enable_pin(codec->dapm, "Headset Mic");
	snd_soc_dapm_enable_pin(codec->dapm, "Headset Stereophone");
	snd_soc_dapm_enable_pin(codec->dapm, "Aux In");

	/* TWL4030 not connected pins */
	snd_soc_dapm_nc_pin(codec->dapm, "CARKITMIC");
	snd_soc_dapm_nc_pin(codec->dapm, "DIGIMIC0");
	snd_soc_dapm_nc_pin(codec->dapm, "DIGIMIC1");

	snd_soc_dapm_nc_pin(codec->dapm, "OUTL");
	snd_soc_dapm_nc_pin(codec->dapm, "OUTR");
	snd_soc_dapm_nc_pin(codec->dapm, "EARPIECE");
	snd_soc_dapm_nc_pin(codec->dapm, "PREDRIVEL");
	snd_soc_dapm_nc_pin(codec->dapm, "PREDRIVER");
	snd_soc_dapm_nc_pin(codec->dapm, "CARKITL");
	snd_soc_dapm_nc_pin(codec->dapm, "CARKITR");

	ret = snd_soc_dapm_sync(codec->dapm);

	return ret;
}

开发者ID:kapoloclubs，项目名称:diana，代码行数:51，代码来源:zoom2.c

注：本文中的snd_soc_dapm_nc_pin函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ snd_soc_dapm_new_controls函数代码示例发布时间：2022-05-30

C++ snd_soc_dapm_disable_pin函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19131|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9972|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ snd_soc_dapm_nc_pin函数代码示例

示例1: rx51_aic34_init

示例2: hx4700_ak4641_init

示例3: magician_uda1380_init

示例4: hx4700_ak4641_init

示例5: mini210_wm8960_init

示例6: rt5631_codec_init

示例7: rt5631_set_output

示例8: at91sam9g20ek_wm8731_init

示例9: tosa_ac97_init

示例10: smdk4x12_wm8960_init

示例11: smartq_wm8987_init

示例12: rk2818_wm8988_init

示例13: evm_aic3x_init

示例14: poodle_wm8731_init

示例15: neo1973_wm8753_init

示例16: omap3pandora_out_init

示例17: aml_m1_codec_init

示例18: corgi_wm8731_init

示例19: omap4_wm8994_init

示例20: zoom2_twl4030_init

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

MATLAB 常用操作命令和快捷键 - 躬耕南阳

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053