• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ snd_soc_component_get_drvdata函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中snd_soc_component_get_drvdata函数的典型用法代码示例。如果您正苦于以下问题：C++ snd_soc_component_get_drvdata函数的具体用法？C++ snd_soc_component_get_drvdata怎么用？C++ snd_soc_component_get_drvdata使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了snd_soc_component_get_drvdata函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: wm9712_soc_probe

static int wm9712_soc_probe(struct snd_soc_component *component)
{
	struct wm9712_priv *wm9712 = snd_soc_component_get_drvdata(component);
	struct regmap *regmap;
	int ret;

	if (wm9712->mfd_pdata) {
		wm9712->ac97 = wm9712->mfd_pdata->ac97;
		regmap = wm9712->mfd_pdata->regmap;
	} else {
#ifdef CONFIG_SND_SOC_AC97_BUS
		wm9712->ac97 = snd_soc_new_ac97_component(component, WM9712_VENDOR_ID,
						      WM9712_VENDOR_ID_MASK);
		if (IS_ERR(wm9712->ac97)) {
			ret = PTR_ERR(wm9712->ac97);
			dev_err(component->dev,
				"Failed to register AC97 codec: %d\n", ret);
			return ret;
		}

		regmap = regmap_init_ac97(wm9712->ac97, &wm9712_regmap_config);
		if (IS_ERR(regmap)) {
			snd_soc_free_ac97_component(wm9712->ac97);
			return PTR_ERR(regmap);
		}
#endif
	}

	snd_soc_component_init_regmap(component, regmap);

	/* set alc mux to none */
	snd_soc_component_update_bits(component, AC97_VIDEO, 0x3000, 0x3000);

	return 0;
}
开发者ID:Lyude，项目名称:linux，代码行数:35，代码来源:wm9712.c


示例2: cs4270_set_dai_fmt

/**
 * cs4270_set_dai_fmt - configure the codec for the selected audio format
 * @codec_dai: the codec DAI
 * @format: a SND_SOC_DAIFMT_x value indicating the data format
 *
 * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the
 * codec accordingly.
 *
 * Currently, this function only supports SND_SOC_DAIFMT_I2S and
 * SND_SOC_DAIFMT_LEFT_J.  The CS4270 codec also supports right-justified
 * data for playback only, but ASoC currently does not support different
 * formats for playback vs. record.
 */
static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai,
			      unsigned int format)
{
	struct snd_soc_component *component = codec_dai->component;
	struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);

	/* set DAI format */
	switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
	case SND_SOC_DAIFMT_I2S:
	case SND_SOC_DAIFMT_LEFT_J:
		cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK;
		break;
	default:
		dev_err(component->dev, "invalid dai format\n");
		return -EINVAL;
	}

	/* set master/slave audio interface */
	switch (format & SND_SOC_DAIFMT_MASTER_MASK) {
	case SND_SOC_DAIFMT_CBS_CFS:
		cs4270->slave_mode = 1;
		break;
	case SND_SOC_DAIFMT_CBM_CFM:
		cs4270->slave_mode = 0;
		break;
	default:
		/* all other modes are unsupported by the hardware */
		dev_err(component->dev, "Unknown master/slave configuration\n");
		return -EINVAL;
	}

	return 0;
}
开发者ID:krzk，项目名称:linux，代码行数:46，代码来源:cs4270.c


示例3: wm8711_hw_params

static int wm8711_hw_params(struct snd_pcm_substream *substream,
	struct snd_pcm_hw_params *params,
	struct snd_soc_dai *dai)
{
	struct snd_soc_component *component = dai->component;
	struct wm8711_priv *wm8711 =  snd_soc_component_get_drvdata(component);
	u16 iface = snd_soc_component_read32(component, WM8711_IFACE) & 0xfff3;
	int i = get_coeff(wm8711->sysclk, params_rate(params));
	u16 srate = (coeff_div[i].sr << 2) |
		(coeff_div[i].bosr << 1) | coeff_div[i].usb;

	snd_soc_component_write(component, WM8711_SRATE, srate);

	/* bit size */
	switch (params_width(params)) {
	case 16:
		break;
	case 20:
		iface |= 0x0004;
		break;
	case 24:
		iface |= 0x0008;
		break;
	}

	snd_soc_component_write(component, WM8711_IFACE, iface);
	return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:28，代码来源:wm8711.c


示例4: mc13783_remove

static void mc13783_remove(struct snd_soc_component *component)
{
	struct mc13783_priv *priv = snd_soc_component_get_drvdata(component);

	/* Make sure VAUDIOON is off */
	mc13xxx_reg_rmw(priv->mc13xxx, MC13783_AUDIO_RX0, 0x3, 0);
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:7，代码来源:mc13783.c


示例5: tas571x_hw_params

static int tas571x_hw_params(struct snd_pcm_substream *substream,
			     struct snd_pcm_hw_params *params,
			     struct snd_soc_dai *dai)
{
	struct tas571x_private *priv = snd_soc_component_get_drvdata(dai->component);
	u32 val;

	switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
	case SND_SOC_DAIFMT_RIGHT_J:
		val = 0x00;
		break;
	case SND_SOC_DAIFMT_I2S:
		val = 0x03;
		break;
	case SND_SOC_DAIFMT_LEFT_J:
		val = 0x06;
		break;
	default:
		return -EINVAL;
	}

	if (params_width(params) >= 24)
		val += 2;
	else if (params_width(params) >= 20)
		val += 1;

	return regmap_update_bits(priv->regmap, TAS571X_SDI_REG,
				  TAS571X_SDI_FMT_MASK, val);
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:29，代码来源:tas571x.c


示例6: cs35l33_pcm_hw_params

static int cs35l33_pcm_hw_params(struct snd_pcm_substream *substream,
				 struct snd_pcm_hw_params *params,
				 struct snd_soc_dai *dai)
{
	struct snd_soc_component *component = dai->component;
	struct cs35l33_private *priv = snd_soc_component_get_drvdata(component);
	int sample_size = params_width(params);
	int coeff = cs35l33_get_mclk_coeff(priv->mclk_int, params_rate(params));

	if (coeff < 0)
		return coeff;

	regmap_update_bits(priv->regmap, CS35L33_CLK_CTL,
		CS35L33_ADSP_FS | CS35L33_INT_FS_RATE,
		cs35l33_mclk_coeffs[coeff].int_fs_ratio
		| cs35l33_mclk_coeffs[coeff].adsp_rate);

	if (priv->is_tdm_mode) {
		sample_size = (sample_size / 8) - 1;
		if (sample_size > 2)
			sample_size = 2;
		regmap_update_bits(priv->regmap, CS35L33_RX_AUD,
			CS35L33_AUDIN_RX_DEPTH,
			sample_size << CS35L33_AUDIN_RX_DEPTH_SHIFT);
	}

	dev_dbg(component->dev, "sample rate=%d, bits per sample=%d\n",
		params_rate(params), params_width(params));

	return 0;
}
开发者ID:Lyude，项目名称:linux，代码行数:31，代码来源:cs35l33.c


示例7: cs35l33_set_bst_ipk

static int cs35l33_set_bst_ipk(struct snd_soc_component *component, unsigned int bst)
{
	struct cs35l33_private *cs35l33 = snd_soc_component_get_drvdata(component);
	int ret = 0, steps = 0;

	/* Boost current in uA */
	if (bst > 3600000 || bst < 1850000) {
		dev_err(component->dev, "Invalid boost current %d\n", bst);
		ret = -EINVAL;
		goto err;
	}

	if (bst % 15625) {
		dev_err(component->dev, "Current not a multiple of 15625uA (%d)\n",
			bst);
		ret = -EINVAL;
		goto err;
	}

	while (bst > 1850000) {
		bst -= 15625;
		steps++;
	}

	regmap_write(cs35l33->regmap, CS35L33_BST_PEAK_CTL,
		steps+0x70);

err:
	return ret;
}
开发者ID:Lyude，项目名称:linux，代码行数:30，代码来源:cs35l33.c


示例8: ak5558_hw_params

static int ak5558_hw_params(struct snd_pcm_substream *substream,
			    struct snd_pcm_hw_params *params,
			    struct snd_soc_dai *dai)
{
	struct snd_soc_component *component = dai->component;
	struct ak5558_priv *ak5558 = snd_soc_component_get_drvdata(component);
	u8 bits;
	int pcm_width = max(params_physical_width(params), ak5558->slot_width);

	/* set master/slave audio interface */
	bits = snd_soc_component_read32(component, AK5558_02_CONTROL1);
	bits &= ~AK5558_BITS;

	switch (pcm_width) {
	case 16:
		bits |= AK5558_DIF_24BIT_MODE;
		break;
	case 32:
		bits |= AK5558_DIF_32BIT_MODE;
		break;
	default:
		return -EINVAL;
	}

	snd_soc_component_update_bits(component, AK5558_02_CONTROL1, AK5558_BITS, bits);

	return 0;
}
开发者ID:Lyude，项目名称:linux，代码行数:28，代码来源:ak5558.c


示例9: ak5558_set_tdm_slot

static int ak5558_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
			       unsigned int rx_mask, int slots,
			       int slot_width)
{
	struct snd_soc_component *component = dai->component;
	struct ak5558_priv *ak5558 = snd_soc_component_get_drvdata(component);
	int tdm_mode;

	ak5558->slots = slots;
	ak5558->slot_width = slot_width;

	switch (slots * slot_width) {
	case 128:
		tdm_mode = AK5558_MODE_TDM128;
		break;
	case 256:
		tdm_mode = AK5558_MODE_TDM256;
		break;
	case 512:
		tdm_mode = AK5558_MODE_TDM512;
		break;
	default:
		tdm_mode = AK5558_MODE_NORMAL;
		break;
	}

	snd_soc_component_update_bits(component, AK5558_03_CONTROL2, AK5558_MODE_BITS,
			    tdm_mode);
	return 0;
}
开发者ID:Lyude，项目名称:linux，代码行数:30，代码来源:ak5558.c


示例10: uda134x_set_dai_fmt

static int uda134x_set_dai_fmt(struct snd_soc_dai *codec_dai,
			       unsigned int fmt)
{
	struct snd_soc_component *component = codec_dai->component;
	struct uda134x_priv *uda134x = snd_soc_component_get_drvdata(component);

	pr_debug("%s fmt: %08X\n", __func__, fmt);

	/* codec supports only full slave mode */
	if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
		printk(KERN_ERR "%s unsupported slave mode\n", __func__);
		return -EINVAL;
	}

	/* no support for clock inversion */
	if ((fmt & SND_SOC_DAIFMT_INV_MASK) != SND_SOC_DAIFMT_NB_NF) {
		printk(KERN_ERR "%s unsupported clock inversion\n", __func__);
		return -EINVAL;
	}

	/* We can't setup DAI format here as it depends on the word bit num */
	/* so let's just store the value for later */
	uda134x->dai_fmt = fmt;

	return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:26，代码来源:uda134x.c


示例11: uda134x_set_bias_level

static int uda134x_set_bias_level(struct snd_soc_component *component,
				  enum snd_soc_bias_level level)
{
	struct uda134x_priv *uda134x = snd_soc_component_get_drvdata(component);
	struct uda134x_platform_data *pd = uda134x->pd;
	pr_debug("%s bias level %d\n", __func__, level);

	switch (level) {
	case SND_SOC_BIAS_ON:
		break;
	case SND_SOC_BIAS_PREPARE:
		/* power on */
		if (pd->power) {
			pd->power(1);
			regcache_sync(uda134x->regmap);
		}
		break;
	case SND_SOC_BIAS_STANDBY:
		break;
	case SND_SOC_BIAS_OFF:
		/* power off */
		if (pd->power) {
			pd->power(0);
			regcache_mark_dirty(uda134x->regmap);
		}
		break;
	}
	return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:29，代码来源:uda134x.c


示例12: uda134x_startup

static int uda134x_startup(struct snd_pcm_substream *substream,
	struct snd_soc_dai *dai)
{
	struct snd_soc_component *component = dai->component;
	struct uda134x_priv *uda134x = snd_soc_component_get_drvdata(component);
	struct snd_pcm_runtime *master_runtime;

	if (uda134x->master_substream) {
		master_runtime = uda134x->master_substream->runtime;

		pr_debug("%s constraining to %d bits at %d\n", __func__,
			 master_runtime->sample_bits,
			 master_runtime->rate);

		snd_pcm_hw_constraint_single(substream->runtime,
					     SNDRV_PCM_HW_PARAM_RATE,
					     master_runtime->rate);

		snd_pcm_hw_constraint_single(substream->runtime,
					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
					     master_runtime->sample_bits);

		uda134x->slave_substream = substream;
	} else
		uda134x->master_substream = substream;

	return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:28，代码来源:uda134x.c


示例13: snd_soc_rtdcom_lookup

static snd_pcm_uframes_t mtk_afe_pcm_pointer
			 (struct snd_pcm_substream *substream)
{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
	struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
	struct mtk_base_afe_memif *memif = &afe->memif[rtd->cpu_dai->id];
	const struct mtk_base_memif_data *memif_data = memif->data;
	struct regmap *regmap = afe->regmap;
	struct device *dev = afe->dev;
	int reg_ofs_base = memif_data->reg_ofs_base;
	int reg_ofs_cur = memif_data->reg_ofs_cur;
	unsigned int hw_ptr = 0, hw_base = 0;
	int ret, pcm_ptr_bytes;

	ret = regmap_read(regmap, reg_ofs_cur, &hw_ptr);
	if (ret || hw_ptr == 0) {
		dev_err(dev, "%s hw_ptr err\n", __func__);
		pcm_ptr_bytes = 0;
		goto POINTER_RETURN_FRAMES;
	}

	ret = regmap_read(regmap, reg_ofs_base, &hw_base);
	if (ret || hw_base == 0) {
		dev_err(dev, "%s hw_ptr err\n", __func__);
		pcm_ptr_bytes = 0;
		goto POINTER_RETURN_FRAMES;
	}

	pcm_ptr_bytes = hw_ptr - hw_base;

POINTER_RETURN_FRAMES:
	return bytes_to_frames(substream->runtime, pcm_ptr_bytes);
}
开发者ID:the-snowwhite，项目名称:linux-socfpga，代码行数:34，代码来源:mtk-afe-platform-driver.c


示例14: sta529_set_bias_level

static int sta529_set_bias_level(struct snd_soc_component *component, enum
		snd_soc_bias_level level)
{
	struct sta529 *sta529 = snd_soc_component_get_drvdata(component);

	switch (level) {
	case SND_SOC_BIAS_ON:
	case SND_SOC_BIAS_PREPARE:
		snd_soc_component_update_bits(component, STA529_FFXCFG0, POWER_CNTLMSAK,
				POWER_UP);
		snd_soc_component_update_bits(component, STA529_MISC,	FFX_CLK_MSK,
				FFX_CLK_ENB);
		break;
	case SND_SOC_BIAS_STANDBY:
		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF)
			regcache_sync(sta529->regmap);
		snd_soc_component_update_bits(component, STA529_FFXCFG0,
					POWER_CNTLMSAK, POWER_STDBY);
		/* Making FFX output to zero */
		snd_soc_component_update_bits(component, STA529_FFXCFG0, FFX_MASK,
				FFX_OFF);
		snd_soc_component_update_bits(component, STA529_MISC, FFX_CLK_MSK,
				FFX_CLK_DIS);
		break;
	case SND_SOC_BIAS_OFF:
		break;
	}

	return 0;

}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:31，代码来源:sta529.c


示例15: cs35l33_spkrdrv_event

static int cs35l33_spkrdrv_event(struct snd_soc_dapm_widget *w,
	struct snd_kcontrol *kcontrol, int event)
{
	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
	struct cs35l33_private *priv = snd_soc_component_get_drvdata(component);

	switch (event) {
	case SND_SOC_DAPM_POST_PMU:
		if (!priv->amp_cal) {
			usleep_range(8000, 9000);
			priv->amp_cal = true;
			regmap_update_bits(priv->regmap, CS35L33_CLASSD_CTL,
				    CS35L33_AMP_CAL, 0);
			dev_dbg(component->dev, "Amp calibration done\n");
		}
		dev_dbg(component->dev, "Amp turned on\n");
		break;
	case SND_SOC_DAPM_POST_PMD:
		dev_dbg(component->dev, "Amp turned off\n");
		break;
	default:
		dev_err(component->dev, "Invalid event = 0x%x\n", event);
		break;
	}

	return 0;
}
开发者ID:Lyude，项目名称:linux，代码行数:27，代码来源:cs35l33.c


示例16: ak5558_probe

static int ak5558_probe(struct snd_soc_component *component)
{
	struct ak5558_priv *ak5558 = snd_soc_component_get_drvdata(component);

	ak5558_power_on(ak5558);
	return ak5558_set_mcki(component);
}
开发者ID:Lyude，项目名称:linux，代码行数:7，代码来源:ak5558.c


示例17: cs35l33_set_bias_level

static int cs35l33_set_bias_level(struct snd_soc_component *component,
				  enum snd_soc_bias_level level)
{
	unsigned int val;
	struct cs35l33_private *priv = snd_soc_component_get_drvdata(component);

	switch (level) {
	case SND_SOC_BIAS_ON:
		break;
	case SND_SOC_BIAS_PREPARE:
		regmap_update_bits(priv->regmap, CS35L33_PWRCTL1,
				    CS35L33_PDN_ALL, 0);
		regmap_update_bits(priv->regmap, CS35L33_CLK_CTL,
				    CS35L33_MCLKDIS, 0);
		break;
	case SND_SOC_BIAS_STANDBY:
		regmap_update_bits(priv->regmap, CS35L33_PWRCTL1,
				    CS35L33_PDN_ALL, CS35L33_PDN_ALL);
		regmap_read(priv->regmap, CS35L33_INT_STATUS_2, &val);
		usleep_range(1000, 1100);
		if (val & CS35L33_PDN_DONE)
			regmap_update_bits(priv->regmap, CS35L33_CLK_CTL,
					    CS35L33_MCLKDIS, CS35L33_MCLKDIS);
		break;
	case SND_SOC_BIAS_OFF:
		break;
	default:
		return -EINVAL;
	}

	return 0;
}
开发者ID:Lyude，项目名称:linux，代码行数:32，代码来源:cs35l33.c


示例18: wm8728_set_bias_level

static int wm8728_set_bias_level(struct snd_soc_component *component,
				 enum snd_soc_bias_level level)
{
	struct wm8728_priv *wm8728 = snd_soc_component_get_drvdata(component);
	u16 reg;

	switch (level) {
	case SND_SOC_BIAS_ON:
	case SND_SOC_BIAS_PREPARE:
	case SND_SOC_BIAS_STANDBY:
		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
			/* Power everything up... */
			reg = snd_soc_component_read32(component, WM8728_DACCTL);
			snd_soc_component_write(component, WM8728_DACCTL, reg & ~0x4);

			/* ..then sync in the register cache. */
			regcache_sync(wm8728->regmap);
		}
		break;

	case SND_SOC_BIAS_OFF:
		reg = snd_soc_component_read32(component, WM8728_DACCTL);
		snd_soc_component_write(component, WM8728_DACCTL, reg | 0x4);
		break;
	}
	return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:27，代码来源:wm8728.c


示例19: cs35l33_component_set_sysclk

static int cs35l33_component_set_sysclk(struct snd_soc_component *component,
		int clk_id, int source, unsigned int freq, int dir)
{
	struct cs35l33_private *cs35l33 = snd_soc_component_get_drvdata(component);

	switch (freq) {
	case CS35L33_MCLK_5644:
	case CS35L33_MCLK_6:
	case CS35L33_MCLK_6144:
		regmap_update_bits(cs35l33->regmap, CS35L33_CLK_CTL,
			CS35L33_MCLKDIV2, 0);
		cs35l33->mclk_int = freq;
		break;
	case CS35L33_MCLK_11289:
	case CS35L33_MCLK_12:
	case CS35L33_MCLK_12288:
		regmap_update_bits(cs35l33->regmap, CS35L33_CLK_CTL,
			CS35L33_MCLKDIV2, CS35L33_MCLKDIV2);
		cs35l33->mclk_int = freq/2;
		break;
	default:
		cs35l33->mclk_int = 0;
		return -EINVAL;
	}

	dev_dbg(component->dev, "external mclk freq=%d, internal mclk freq=%d\n",
		freq, cs35l33->mclk_int);

	return 0;
}
开发者ID:Lyude，项目名称:linux，代码行数:30，代码来源:cs35l33.c


示例20: adau17x1_dsp_mux_enum_get

static int adau17x1_dsp_mux_enum_get(struct snd_kcontrol *kcontrol,
	struct snd_ctl_elem_value *ucontrol)
{
	struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol);
	struct adau *adau = snd_soc_component_get_drvdata(component);
	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
	unsigned int stream = e->shift_l;
	unsigned int reg, val;
	int ret;

	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
		reg = ADAU17X1_SERIAL_INPUT_ROUTE;
	else
		reg = ADAU17X1_SERIAL_OUTPUT_ROUTE;

	ret = regmap_read(adau->regmap, reg, &val);
	if (ret)
		return ret;

	if (val != 0)
		val = 1;
	ucontrol->value.enumerated.item[0] = val;

	return 0;
}
开发者ID:krzk，项目名称:linux，代码行数:25，代码来源:adau17x1.c



注：本文中的snd_soc_component_get_drvdata函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ snd_soc_dai_get_dma_data函数代码示例发布时间：2022-05-30
下一篇：
C++ snd_soc_codec_set_cache_io函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap