C++ snd_pcm_hw_constraint_minmax函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中snd_pcm_hw_constraint_minmax函数的典型用法代码示例。如果您正苦于以下问题：C++ snd_pcm_hw_constraint_minmax函数的具体用法？C++ snd_pcm_hw_constraint_minmax怎么用？C++ snd_pcm_hw_constraint_minmax使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了snd_pcm_hw_constraint_minmax函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: wl1273_startup

static int wl1273_startup(struct snd_pcm_substream *substream,
			  struct snd_soc_dai *dai)
{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct snd_soc_codec *codec = rtd->codec;
	struct wl1273_priv *wl1273 = snd_soc_codec_get_drvdata(codec);

	switch (wl1273->mode) {
	case WL1273_MODE_BT:
		snd_pcm_hw_constraint_minmax(substream->runtime,
					     SNDRV_PCM_HW_PARAM_RATE,
					     8000, 8000);
		snd_pcm_hw_constraint_minmax(substream->runtime,
					     SNDRV_PCM_HW_PARAM_CHANNELS, 1, 1);
		break;
	case WL1273_MODE_FM_RX:
		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
			pr_err("Cannot play in RX mode.\n");
			return -EINVAL;
		}
		break;
	case WL1273_MODE_FM_TX:
		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
			pr_err("Cannot capture in TX mode.\n");
			return -EINVAL;
		}
		break;
	default:
		return -EINVAL;
		break;
	}

	return 0;
}

开发者ID:454053205，项目名称:linux，代码行数:34，代码来源:wl1273.c

示例2: bcm947xx_pcm_set_constraints

static int bcm947xx_pcm_set_constraints(struct snd_pcm_runtime *runtime,
	bcm947xx_i2s_info_t *snd_bcm)
{
	int ret;

	/* rate */
	if ((ret = snd_pcm_hw_constraint_minmax(runtime,
					SNDRV_PCM_HW_PARAM_RATE, snd_bcm->rate, snd_bcm->rate)) < 0)
	{
		DBG("%s SNDRV_PCM_HW_PARAM_RATE failed rate=%d\n", __FUNCTION__, snd_bcm->rate);
		goto err;
	}
	/* channels */
	if ((ret = snd_pcm_hw_constraint_minmax(runtime,
					SNDRV_PCM_HW_PARAM_CHANNELS, snd_bcm->channels, snd_bcm->channels)) < 0)
	{
		DBG("%s SNDRV_PCM_HW_PARAM_CHANNELS failed channels=%d\n", __FUNCTION__, snd_bcm->channels);
		goto err;
	}
	/* width */
	if ((ret = snd_pcm_hw_constraint_minmax(runtime,
					SNDRV_PCM_HW_PARAM_SAMPLE_BITS, snd_bcm->sample_bits, snd_bcm->sample_bits)) < 0)
	{
		DBG("%s SNDRV_PCM_HW_PARAM_SAMPLE_BITS failed bits=%d\n", __FUNCTION__, snd_bcm->sample_bits);
		goto err;
	}

err:
	if (ret < 0)
		DBG("%s return with error %d\n", __FUNCTION__, ret);

	return ret;
}

开发者ID:Antares84，项目名称:asuswrt-merlin，代码行数:33，代码来源:bcm947xx-pcm.c

示例3: uda134x_startup

static int uda134x_startup(struct snd_pcm_substream *substream,
	struct snd_soc_dai *dai)
{
	struct snd_soc_codec *codec = dai->codec;
	struct uda134x_priv *uda134x = snd_soc_codec_get_drvdata(codec);
	struct snd_pcm_runtime *master_runtime;

	if (uda134x->master_substream) {
		master_runtime = uda134x->master_substream->runtime;

		pr_debug("%s constraining to %d bits at %d\n", __func__,
			 master_runtime->sample_bits,
			 master_runtime->rate);

		snd_pcm_hw_constraint_minmax(substream->runtime,
					     SNDRV_PCM_HW_PARAM_RATE,
					     master_runtime->rate,
					     master_runtime->rate);

		snd_pcm_hw_constraint_minmax(substream->runtime,
					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
					     master_runtime->sample_bits,
					     master_runtime->sample_bits);

		uda134x->slave_substream = substream;
	} else
		uda134x->master_substream = substream;

	return 0;
}

开发者ID:rajat1994，项目名称:linux，代码行数:30，代码来源:uda134x.c

示例4: lx_pcm_open

static int lx_pcm_open(struct snd_pcm_substream *substream)
{
	struct lx6464es *chip = snd_pcm_substream_chip(substream);
	struct snd_pcm_runtime *runtime = substream->runtime;
	int err = 0;
	int board_rate;

	snd_printdd("->lx_pcm_open\n");
	mutex_lock(&chip->setup_mutex);

	/* copy the struct snd_pcm_hardware struct */
	runtime->hw = lx_caps;

#if 0
	/* buffer-size should better be multiple of period-size */
	err = snd_pcm_hw_constraint_integer(runtime,
					    SNDRV_PCM_HW_PARAM_PERIODS);
	if (err < 0) {
		snd_printk(KERN_WARNING LXP "could not constrain periods\n");
		goto exit;
	}
#endif

	/* the clock rate cannot be changed */
	board_rate = chip->board_sample_rate;
	err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE,
					   board_rate, board_rate);

	if (err < 0) {
		snd_printk(KERN_WARNING LXP "could not constrain periods\n");
		goto exit;
	}

	/* constrain period size */
	err = snd_pcm_hw_constraint_minmax(runtime,
					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
					   MICROBLAZE_IBL_MIN,
					   MICROBLAZE_IBL_MAX);
	if (err < 0) {
		snd_printk(KERN_WARNING LXP
			   "could not constrain period size\n");
		goto exit;
	}

	snd_pcm_hw_constraint_step(runtime, 0,
				   SNDRV_PCM_HW_PARAM_BUFFER_SIZE, 32);

	snd_pcm_set_sync(substream);
	err = 0;

exit:
	runtime->private_data = chip;

	mutex_unlock(&chip->setup_mutex);
	snd_printdd("<-lx_pcm_open, %d\n", err);
	return err;
}

开发者ID:Core2idiot，项目名称:Kernel-Samsung-3.0...-，代码行数:57，代码来源:lx6464es.c

示例5: aic3008_dai_startup

static int aic3008_dai_startup(struct snd_pcm_substream *substream,
		struct snd_soc_dai *dai)
{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct snd_soc_codec *codec = rtd->codec;
	struct aic3008_priv *aic3008 = snd_soc_codec_get_drvdata(codec);
	struct spi_device *spi = codec->control_data;
	struct snd_pcm_runtime *master_runtime;

	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
		aic3008->playback_active++;
	else
		aic3008->capture_active++;

	/* The DAI has shared clocks so if we already have a playback or
	 * capture going then constrain this substream to match it.
	 */
	if (aic3008->master_substream) {
		master_runtime = aic3008->master_substream->runtime;

		/* dev_dbg(&spi->dev, "Constraining to %d bits\n",
		 master_runtime->sample_bits); */
		AUD_DBG("%p Constraining to %d bits\n", &spi->dev,
				master_runtime->sample_bits);

		snd_pcm_hw_constraint_minmax(substream->runtime,
				SNDRV_PCM_HW_PARAM_SAMPLE_BITS, master_runtime->sample_bits,
				master_runtime->sample_bits);

		aic3008->slave_substream = substream;
	} else
		aic3008->master_substream = substream;

	return 0;
}

开发者ID:chriscpritchard，项目名称:android_kernel_htc_endeavor，代码行数:35，代码来源:tlv320aic3008.c

示例6: wm8903_startup

static int wm8903_startup(struct snd_pcm_substream *substream,
			  struct snd_soc_dai *dai)
{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct snd_soc_device *socdev = rtd->socdev;
	struct snd_soc_codec *codec = socdev->card->codec;
	struct wm8903_priv *wm8903 = codec->private_data;
	struct i2c_client *i2c = codec->control_data;
	struct snd_pcm_runtime *master_runtime;

	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
		wm8903->playback_active++;
	else
		wm8903->capture_active++;

	/* The DAI has shared clocks so if we already have a playback or
	 * capture going then constrain this substream to match it.
	 */
	if (wm8903->master_substream) {
		master_runtime = wm8903->master_substream->runtime;

		dev_dbg(&i2c->dev, "Constraining to %d bits\n",
			master_runtime->sample_bits);

		snd_pcm_hw_constraint_minmax(substream->runtime,
					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
					     master_runtime->sample_bits,
					     master_runtime->sample_bits);

		wm8903->slave_substream = substream;
	} else
		wm8903->master_substream = substream;

	return 0;
}

开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:35，代码来源:wm8903.c

示例7: adau1977_startup

static int adau1977_startup(struct snd_pcm_substream *substream,
	struct snd_soc_dai *dai)
{
	struct adau1977 *adau1977 = snd_soc_codec_get_drvdata(dai->codec);
	u64 formats = 0;

	if (adau1977->slot_width == 16)
		formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE;
	else if (adau1977->right_j || adau1977->slot_width == 24)
		formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE;

	snd_pcm_hw_constraint_list(substream->runtime, 0,
		SNDRV_PCM_HW_PARAM_RATE, &adau1977->constraints);

	if (adau1977->master)
		snd_pcm_hw_constraint_minmax(substream->runtime,
			SNDRV_PCM_HW_PARAM_RATE, 8000, adau1977->max_master_fs);

	if (formats != 0)
		snd_pcm_hw_constraint_mask64(substream->runtime,
			SNDRV_PCM_HW_PARAM_FORMAT, formats);

	return 0;
}

开发者ID:383530895，项目名称:linux，代码行数:25，代码来源:adau1977.c

示例8: tda1997x_pcm_startup

/* refine sample-rate based on HDMI source */
static int tda1997x_pcm_startup(struct snd_pcm_substream *substream,
	struct snd_soc_dai *dai)
{
	struct snd_soc_codec *codec = dai->codec;
	struct snd_pcm_runtime *rtd = substream->runtime;
        tda1997x_audout_fmt_t fmt;
	int rate, ret;

        ret = tda1997x_get_audout_fmt(&fmt);
	if (ret) {
		dev_err(codec->dev, "failed to obtain tda1997x info: %d\n",
			ret);
		return -EIO;
	}
	rate = fmt.samplerate;

	ret = snd_pcm_hw_constraint_minmax(rtd, SNDRV_PCM_HW_PARAM_RATE,
					   rate, rate);
	if (ret > 0)
		dev_info(codec->dev, "set samplerate constraint to %dHz\n",
			 rate);
	else
		dev_err(codec->dev, "failed to set samplerate constraint "
			"to %dHz: %d\n", rate, ret);

	return 0;
}

开发者ID:stevezilla，项目名称:dplive-linux，代码行数:28，代码来源:tda1997x.c

示例9: msm_lsm_open

static int msm_lsm_open(struct snd_pcm_substream *substream)
{
	struct snd_pcm_runtime *runtime = substream->runtime;
	struct lsm_priv *prtd;
	int ret = 0;

	pr_debug("%s\n", __func__);
	prtd = kzalloc(sizeof(struct lsm_priv), GFP_KERNEL);
	if (!prtd) {
		pr_err("%s: Failed to allocate memory for lsm_priv\n",
		       __func__);
		return -ENOMEM;
	}
	spin_lock_init(&prtd->event_lock);
	init_waitqueue_head(&prtd->event_wait);
	prtd->substream = substream;
	runtime->private_data = prtd;
	runtime->hw = msm_pcm_hardware_capture;

	ret = snd_pcm_hw_constraint_list(runtime, 0,
				SNDRV_PCM_HW_PARAM_RATE,
				&constraints_sample_rates);
	if (ret < 0)
		pr_info("%s: snd_pcm_hw_constraint_list failed ret %d\n",
			 __func__, ret);
	/* Ensure that buffer size is a multiple of period size */
	ret = snd_pcm_hw_constraint_integer(runtime,
			    SNDRV_PCM_HW_PARAM_PERIODS);
	if (ret < 0)
		pr_info("%s: snd_pcm_hw_constraint_integer failed ret %d\n",
			__func__, ret);

	ret = snd_pcm_hw_constraint_minmax(runtime,
		SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
		CAPTURE_MIN_NUM_PERIODS * CAPTURE_MIN_PERIOD_SIZE,
		CAPTURE_MAX_NUM_PERIODS * CAPTURE_MAX_PERIOD_SIZE);
	if (ret < 0)
		pr_info("%s: constraint for buffer bytes min max ret = %d\n",
			__func__, ret);
	ret = snd_pcm_hw_constraint_step(runtime, 0,
		SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 32);
	if (ret < 0) {
		pr_info("%s: constraint for period bytes step ret = %d\n",
			__func__, ret);
	}
	ret = snd_pcm_hw_constraint_step(runtime, 0,
		SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 32);
	if (ret < 0)
		pr_info("%s: constraint for buffer bytes step ret = %d\n",
			__func__, ret);
	prtd->lsm_client = q6lsm_client_alloc(
				(lsm_app_cb)lsm_event_handler, prtd);
	if (!prtd->lsm_client) {
		pr_err("%s: Could not allocate memory\n", __func__);
		kfree(prtd);
		runtime->private_data = NULL;
		return -ENOMEM;
	}
	return 0;
}

开发者ID:AndroidGX，项目名称:SimpleGX-L-5.0.2_BOE2_G901F，代码行数:60，代码来源:msm-lsm-client.c

示例10: set_stream_hw

static int set_stream_hw(struct ua101 *ua, struct snd_pcm_substream *substream,
			 unsigned int channels)
{
	int err;

	substream->runtime->hw.info =
		SNDRV_PCM_INFO_MMAP |
		SNDRV_PCM_INFO_MMAP_VALID |
		SNDRV_PCM_INFO_BATCH |
		SNDRV_PCM_INFO_INTERLEAVED |
		SNDRV_PCM_INFO_BLOCK_TRANSFER |
		SNDRV_PCM_INFO_FIFO_IN_FRAMES;
	substream->runtime->hw.formats = ua->format_bit;
	substream->runtime->hw.rates = snd_pcm_rate_to_rate_bit(ua->rate);
	substream->runtime->hw.rate_min = ua->rate;
	substream->runtime->hw.rate_max = ua->rate;
	substream->runtime->hw.channels_min = channels;
	substream->runtime->hw.channels_max = channels;
	substream->runtime->hw.buffer_bytes_max = 45000 * 1024;
	substream->runtime->hw.period_bytes_min = 1;
	substream->runtime->hw.period_bytes_max = UINT_MAX;
	substream->runtime->hw.periods_min = 2;
	substream->runtime->hw.periods_max = UINT_MAX;
	err = snd_pcm_hw_constraint_minmax(substream->runtime,
					   SNDRV_PCM_HW_PARAM_PERIOD_TIME,
					   1500000 / ua->packets_per_second,
					   UINT_MAX);
	if (err < 0)
		return err;
	err = snd_pcm_hw_constraint_msbits(substream->runtime, 0, 32, 24);
	return err;
}

开发者ID:454053205，项目名称:linux，代码行数:32，代码来源:ua101.c

示例11: emu10k1_playback_constraints

static int emu10k1_playback_constraints(struct snd_pcm_runtime *runtime)
{
	int err;
	if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
		return err;
	if ((err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 256, UINT_MAX)) < 0)
		return err;
	return 0;
}

开发者ID:FatSunHYS，项目名称:OSCourseDesign，代码行数:9，代码来源:dummy.c

示例12: skl_set_pcm_constrains

static void skl_set_pcm_constrains(struct hdac_ext_bus *ebus,
				 struct snd_pcm_runtime *runtime)
{
	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);

	/* avoid wrap-around with wall-clock */
	snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_TIME,
				     20, 178000000);
}

开发者ID:AK101111，项目名称:linux，代码行数:9，代码来源:skl-pcm.c

示例13: n810_startup

static int n810_startup(struct snd_pcm_substream *substream)
{
	struct snd_pcm_runtime *runtime = substream->runtime;
	struct snd_soc_pcm_runtime *rtd = substream->private_data;

	snd_pcm_hw_constraint_minmax(runtime,
				     SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);

	n810_ext_control(&rtd->card->dapm);
	return clk_prepare_enable(sys_clkout2);
}

开发者ID:19Dan01，项目名称:linux，代码行数:11，代码来源:n810.c

示例14: ssm2602_startup

static int ssm2602_startup(struct snd_pcm_substream *substream,
			   struct snd_soc_dai *dai)
{
	struct snd_soc_codec *codec = dai->codec;
	struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec);
	struct snd_pcm_runtime *master_runtime;

	/* The DAI has shared clocks so if we already have a playback or
	 * capture going then constrain this substream to match it.
	 * TODO: the ssm2602 allows pairs of non-matching PB/REC rates
	 */
	if (ssm2602->master_substream) {
		master_runtime = ssm2602->master_substream->runtime;
		dev_dbg(codec->dev, "Constraining to %d bits at %dHz\n",
			master_runtime->sample_bits,
			master_runtime->rate);

		if (master_runtime->rate != 0)
			snd_pcm_hw_constraint_minmax(substream->runtime,
						     SNDRV_PCM_HW_PARAM_RATE,
						     master_runtime->rate,
						     master_runtime->rate);

		if (master_runtime->sample_bits != 0)
			snd_pcm_hw_constraint_minmax(substream->runtime,
						     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
						     master_runtime->sample_bits,
						     master_runtime->sample_bits);

		ssm2602->slave_substream = substream;
	} else
		ssm2602->master_substream = substream;

	if (ssm2602->sysclk_constraints) {
		snd_pcm_hw_constraint_list(substream->runtime, 0,
				   SNDRV_PCM_HW_PARAM_RATE,
				   ssm2602->sysclk_constraints);
	}

	return 0;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:41，代码来源:ssm2602.c

示例15: ux500_msp_dai_hw_params

static int ux500_msp_dai_hw_params(struct snd_pcm_substream *substream,
				struct snd_pcm_hw_params *params,
				struct snd_soc_dai *dai)
{
	unsigned int mask, slots_active;
	struct snd_pcm_runtime *runtime = substream->runtime;
	struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev);

	dev_dbg(dai->dev, "%s: MSP %d (%s): Enter.\n",
			__func__, dai->id, snd_pcm_stream_str(substream));

	switch (drvdata->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
	case SND_SOC_DAIFMT_I2S:
		snd_pcm_hw_constraint_minmax(runtime,
				SNDRV_PCM_HW_PARAM_CHANNELS,
				1, 2);
		break;

	case SND_SOC_DAIFMT_DSP_B:
	case SND_SOC_DAIFMT_DSP_A:
		mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
			drvdata->tx_mask :
			drvdata->rx_mask;

		slots_active = hweight32(mask);
		dev_dbg(dai->dev, "TDM-slots active: %d", slots_active);

		snd_pcm_hw_constraint_minmax(runtime,
				SNDRV_PCM_HW_PARAM_CHANNELS,
				slots_active, slots_active);
		break;

	default:
		dev_err(dai->dev,
			"%s: Error: Unsupported protocol (fmt = 0x%x)!\n",
			__func__, drvdata->fmt);
		return -EINVAL;
	}

	return 0;
}

开发者ID:AeroGirl，项目名称:VAR-SOM-AM33-SDK7-Kernel，代码行数:41，代码来源:ux500_msp_dai.c

示例16: adav80x_dai_startup

/* Enforce the same sample rate on all audio interfaces */
static int adav80x_dai_startup(struct snd_pcm_substream *substream,
	struct snd_soc_dai *dai)
{
	struct snd_soc_codec *codec = dai->codec;
	struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);

	if (!codec->active || !adav80x->rate)
		return 0;

	return snd_pcm_hw_constraint_minmax(substream->runtime,
			SNDRV_PCM_HW_PARAM_RATE, adav80x->rate, adav80x->rate);
}

开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:13，代码来源:adav80x.c

示例17: rx51_startup

static int rx51_startup(struct snd_pcm_substream *substream)
{
	struct snd_pcm_runtime *runtime = substream->runtime;
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct snd_soc_codec *codec = rtd->codec;

	snd_pcm_hw_constraint_minmax(runtime,
				     SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
	rx51_ext_control(codec);

	return 0;
}

开发者ID:303750856，项目名称:linux-3.1，代码行数:12，代码来源:rx51.c

示例18: ct_pcm_playback_open

/* pcm playback operations */
static int ct_pcm_playback_open(struct snd_pcm_substream *substream)
{
	struct ct_atc *atc = snd_pcm_substream_chip(substream);
	struct snd_pcm_runtime *runtime = substream->runtime;
	struct ct_atc_pcm *apcm;
	int err;

	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
	if (!apcm)
		return -ENOMEM;

	apcm->substream = substream;
	apcm->interrupt = ct_atc_pcm_interrupt;
	if (IEC958 == substream->pcm->device) {
		runtime->hw = ct_spdif_passthru_playback_hw;
		atc->spdif_out_passthru(atc, 1);
	} else {
		runtime->hw = ct_pcm_playback_hw;
		if (FRONT == substream->pcm->device)
			runtime->hw.channels_max = 8;
	}

	err = snd_pcm_hw_constraint_integer(runtime,
					    SNDRV_PCM_HW_PARAM_PERIODS);
	if (err < 0) {
		kfree(apcm);
		return err;
	}
	err = snd_pcm_hw_constraint_minmax(runtime,
					   SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
					   1024, UINT_MAX);
	if (err < 0) {
		kfree(apcm);
		return err;
	}

	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
	if (!apcm->timer) {
		kfree(apcm);
		return -ENOMEM;
	}
	runtime->private_data = apcm;
	runtime->private_free = ct_atc_pcm_free_substream;

	return 0;
}

开发者ID:1yankeedt，项目名称:D710BST_FL24_Kernel，代码行数:47，代码来源:ctpcm.c

示例19: mtkalsa_capture_constraints

static int mtkalsa_capture_constraints(struct snd_pcm_runtime *runtime)
{
    int err;
    err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
    if (err < 0)
    {
        printk("mtkalsa_capture_constraints SNDRV_PCM_HW_PARAM_PERIODS err = %d", err);
        return err;
    }
    err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 1, UINT_MAX);
    if (err < 0)
    {
        printk("snd_pcm_hw_constraint_minmax SNDRV_PCM_HW_PARAM_BUFFER_BYTES err = %d", err);
        return err;
    }
    return 0;
}

开发者ID:4Fwolf，项目名称:motorola-hawk-kernel-3.4.67，代码行数:17，代码来源:mt_soc_pcm_capture.c

示例20: ct_pcm_capture_open

/* pcm capture operations */
static int ct_pcm_capture_open(struct snd_pcm_substream *substream)
{
	struct ct_atc *atc = snd_pcm_substream_chip(substream);
	struct snd_pcm_runtime *runtime = substream->runtime;
	struct ct_atc_pcm *apcm;
	int err;

	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
	if (!apcm)
		return -ENOMEM;

	apcm->started = 0;
	apcm->substream = substream;
	apcm->interrupt = ct_atc_pcm_interrupt;
	runtime->hw = ct_pcm_capture_hw;
	runtime->hw.rate_max = atc->rsr * atc->msr;

	err = snd_pcm_hw_constraint_integer(runtime,
					    SNDRV_PCM_HW_PARAM_PERIODS);
	if (err < 0) {
		kfree(apcm);
		return err;
	}
	err = snd_pcm_hw_constraint_minmax(runtime,
					   SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
					   1024, UINT_MAX);
	if (err < 0) {
		kfree(apcm);
		return err;
	}

	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
	if (!apcm->timer) {
		kfree(apcm);
		return -ENOMEM;
	}
	runtime->private_data = apcm;
	runtime->private_free = ct_atc_pcm_free_substream;

	return 0;
}

开发者ID:1yankeedt，项目名称:D710BST_FL24_Kernel，代码行数:42，代码来源:ctpcm.c

注：本文中的snd_pcm_hw_constraint_minmax函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ snd_pcm_hw_constraint_step函数代码示例发布时间：2022-05-30

C++ snd_pcm_hw_constraint_list函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19131|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9972|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ snd_pcm_hw_constraint_minmax函数代码示例

示例1: wl1273_startup

示例2: bcm947xx_pcm_set_constraints

示例3: uda134x_startup

示例4: lx_pcm_open

示例5: aic3008_dai_startup

示例6: wm8903_startup

示例7: adau1977_startup

示例8: tda1997x_pcm_startup

示例9: msm_lsm_open

示例10: set_stream_hw

示例11: emu10k1_playback_constraints

示例12: skl_set_pcm_constrains

示例13: n810_startup

示例14: ssm2602_startup

示例15: ux500_msp_dai_hw_params

示例16: adav80x_dai_startup

示例17: rx51_startup

示例18: ct_pcm_playback_open

示例19: mtkalsa_capture_constraints

示例20: ct_pcm_capture_open

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

MATLAB 常用操作命令和快捷键 - 躬耕南阳

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053