C++ snd_card_proc_new函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中snd_card_proc_new函数的典型用法代码示例。如果您正苦于以下问题：C++ snd_card_proc_new函数的具体用法？C++ snd_card_proc_new怎么用？C++ snd_card_proc_new使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了snd_card_proc_new函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cs_proc_init

static void cs_proc_init(ice1712_t *ice)
{
	snd_info_entry_t *entry;
	if (! snd_card_proc_new(ice->card, "cs_codec", &entry)) {
		snd_info_set_text_ops(entry, ice, 1024, cs_proc_regs_read);
	}
}

开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:7，代码来源:pontis.c

示例2: snd_gus_irq_profile_init

void snd_gus_irq_profile_init(struct snd_gus_card *gus)
{
	struct snd_info_entry *entry;

	if (! snd_card_proc_new(gus->card, "gusirq", &entry))
		snd_info_set_text_ops(entry, gus, snd_gus_irq_info_read);
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:7，代码来源:gus_irq.c

示例3: snd_atiixp_proc_init

static void __devinit snd_atiixp_proc_init(atiixp_t *chip)
{
    snd_info_entry_t *entry;

    if (! snd_card_proc_new(chip->card, "atiixp", &entry))
        snd_info_set_text_ops(entry, chip, 1024, snd_atiixp_proc_read);
}

开发者ID:idtek，项目名称:linux-2.6.11，代码行数:7，代码来源:atiixp.c

示例4: snd_gf1_mem_init

int snd_gf1_mem_init(struct snd_gus_card * gus)
{
    struct snd_gf1_mem *alloc;
    struct snd_gf1_mem_block block;
#ifdef CONFIG_SND_DEBUG
    struct snd_info_entry *entry;
#endif

    alloc = &gus->gf1.mem_alloc;
    mutex_init(&alloc->memory_mutex);
    alloc->first = alloc->last = NULL;
    if (!gus->gf1.memory)
        return 0;

    memset(&block, 0, sizeof(block));
    block.owner = SNDRV_GF1_MEM_OWNER_DRIVER;
    if (gus->gf1.enh_mode) {
        block.ptr = 0;
        block.size = 1024;
        block.name = kstrdup("InterWave LFOs", GFP_KERNEL);
        if (snd_gf1_mem_xalloc(alloc, &block) == NULL)
            return -ENOMEM;
    }
    block.ptr = gus->gf1.default_voice_address;
    block.size = 4;
    block.name = kstrdup("Voice default (NULL's)", GFP_KERNEL);
    if (snd_gf1_mem_xalloc(alloc, &block) == NULL)
        return -ENOMEM;
#ifdef CONFIG_SND_DEBUG
    if (! snd_card_proc_new(gus->card, "gusmem", &entry))
        snd_info_set_text_ops(entry, gus, snd_gf1_mem_info_read);
#endif
    return 0;
}

开发者ID:chunyenho，项目名称:RTS-hw2，代码行数:34，代码来源:gus_mem.c

示例5: oxygen_proc_init

static void oxygen_proc_init(struct oxygen *chip)
{
	struct snd_info_entry *entry;

	if (!snd_card_proc_new(chip->card, "cmi8788", &entry))
		snd_info_set_text_ops(entry, chip, oxygen_proc_read);
}

开发者ID:458941968，项目名称:mini2440-kernel-2.6.29，代码行数:7，代码来源:oxygen_lib.c

示例6: snd_atiixp_proc_init

static void snd_atiixp_proc_init(struct atiixp *chip)
{
	struct snd_info_entry *entry;

	if (! snd_card_proc_new(chip->card, "atiixp", &entry))
		snd_info_set_text_ops(entry, chip, snd_atiixp_proc_read);
}

开发者ID:3null，项目名称:linux，代码行数:7，代码来源:atiixp.c

示例7: snd_ad1889_proc_init

static void __devinit
snd_ad1889_proc_init(struct snd_ad1889 *chip)
{
	struct snd_info_entry *entry;

	if (!snd_card_proc_new(chip->card, chip->card->driver, &entry))
		snd_info_set_text_ops(entry, chip, snd_ad1889_proc_read);
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:8，代码来源:ad1889.c

示例8: wm_proc_init

static void wm_proc_init(struct snd_ice1712 *ice)
{
	struct snd_info_entry *entry;
	if (!snd_card_proc_new(ice->card, "wm_codec", &entry)) {
		snd_info_set_text_ops(entry, ice, wm_proc_regs_read);
		entry->mode |= S_IWUSR;
		entry->c.text.write = wm_proc_regs_write;
	}
}

开发者ID:mjduddin，项目名称:B14CKB1RD_kernel_m8，代码行数:9，代码来源:prodigy_hifi.c

示例9: snd_gf1_mem_proc_init

int snd_gf1_mem_proc_init(struct snd_gus_card * gus)
{
	int idx;
	char name[16];
	struct gus_proc_private *priv;
	struct snd_info_entry *entry;

	for (idx = 0; idx < 4; idx++) {
		if (gus->gf1.mem_alloc.banks_8[idx].size > 0) {
			priv = kzalloc(sizeof(*priv), GFP_KERNEL);
			if (priv == NULL)
				return -ENOMEM;
			priv->gus = gus;
			sprintf(name, "gus-ram-%i", idx);
			if (! snd_card_proc_new(gus->card, name, &entry)) {
				entry->content = SNDRV_INFO_CONTENT_DATA;
				entry->private_data = priv;
				entry->private_free = snd_gf1_mem_proc_free;
				entry->c.ops = &snd_gf1_mem_proc_ops;
				priv->address = gus->gf1.mem_alloc.banks_8[idx].address;
				priv->size = entry->size = gus->gf1.mem_alloc.banks_8[idx].size;
			}
		}
	}
	for (idx = 0; idx < 4; idx++) {
		if (gus->gf1.rom_present & (1 << idx)) {
			priv = kzalloc(sizeof(*priv), GFP_KERNEL);
			if (priv == NULL)
				return -ENOMEM;
			priv->rom = 1;
			priv->gus = gus;
			sprintf(name, "gus-rom-%i", idx);
			if (! snd_card_proc_new(gus->card, name, &entry)) {
				entry->content = SNDRV_INFO_CONTENT_DATA;
				entry->private_data = priv;
				entry->private_free = snd_gf1_mem_proc_free;
				entry->c.ops = &snd_gf1_mem_proc_ops;
				priv->address = idx * 4096 * 1024;
				priv->size = entry->size = gus->gf1.rom_memory;
			}
		}
	}
	return 0;
}

开发者ID:020gzh，项目名称:linux，代码行数:44，代码来源:gus_mem_proc.c

示例10: wm_proc_init

static void wm_proc_init(ice1712_t *ice)
{
	snd_info_entry_t *entry;
	if (! snd_card_proc_new(ice->card, "wm_codec", &entry)) {
		snd_info_set_text_ops(entry, ice, 1024, wm_proc_regs_read);
		entry->mode |= S_IWUSR;
		entry->c.text.write_size = 1024;
		entry->c.text.write = wm_proc_regs_write;
	}
}

开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:10，代码来源:pontis.c

示例11: dummy_proc_init

static void __devinit dummy_proc_init(struct snd_dummy *chip)
{
	struct snd_info_entry *entry;

	if (!snd_card_proc_new(chip->card, "dummy_pcm", &entry)) {
		snd_info_set_text_ops(entry, chip, dummy_proc_read);
		entry->c.text.write = dummy_proc_write;
		entry->mode |= S_IWUSR;
	}
}

开发者ID:325116067，项目名称:semc-qsd8x50，代码行数:10，代码来源:dummy.c

示例12: proc_init

static int proc_init(struct snd_akm4xxx *ak)
{
	struct snd_info_entry *entry;
	int err;
	err = snd_card_proc_new(ak->card, ak->name, &entry);
	if (err < 0)
		return err;
	snd_info_set_text_ops(entry, ak, proc_regs_read);
	return 0;
}

开发者ID:1yankeedt，项目名称:D710BST_FL24_Kernel，代码行数:10，代码来源:ak4xxx-adda.c

示例13: snd_mixart_proc_init

static void __devinit snd_mixart_proc_init(struct snd_mixart *chip)
{
	struct snd_info_entry *entry;

	/* text interface to read perf and temp meters */
	if (! snd_card_proc_new(chip->card, "board_info", &entry)) {
		entry->private_data = chip;
		entry->c.text.read = snd_mixart_proc_read;
	}

	if (! snd_card_proc_new(chip->card, "mixart_BA0", &entry)) {
		entry->content = SNDRV_INFO_CONTENT_DATA;
		entry->private_data = chip->mgr;	
		entry->c.ops = &snd_mixart_proc_ops_BA0;
		entry->size = MIXART_BA0_SIZE;
	}
	if (! snd_card_proc_new(chip->card, "mixart_BA1", &entry)) {
		entry->content = SNDRV_INFO_CONTENT_DATA;
		entry->private_data = chip->mgr;
		entry->c.ops = &snd_mixart_proc_ops_BA1;
		entry->size = MIXART_BA1_SIZE;
	}
}

开发者ID:458941968，项目名称:mini2440-kernel-2.6.29，代码行数:23，代码来源:mixart.c

示例14: loopback_proc_new

static int __devinit loopback_proc_new(struct loopback *loopback, int cidx)
{
	char name[32];
	struct snd_info_entry *entry;
	int err;

	snprintf(name, sizeof(name), "cable#%d", cidx);
	err = snd_card_proc_new(loopback->card, name, &entry);
	if (err < 0)
		return err;

	snd_info_set_text_ops(entry, loopback, print_cable_info);
	return 0;
}

开发者ID:mjduddin，项目名称:B14CKB1RD_kernel_m8，代码行数:14，代码来源:aloop.c

示例15: snd_hda_eld_proc_new

int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld)
{
	char name[32];
	struct snd_info_entry *entry;
	int err;

	snprintf(name, sizeof(name), "eld#%d", codec->addr);
	err = snd_card_proc_new(codec->bus->card, name, &entry);
	if (err < 0)
		return err;

	snd_info_set_text_ops(entry, eld, hdmi_print_eld_info);
	entry->c.text.write = hdmi_write_eld_info;
	entry->mode |= S_IWUSR;
	eld->proc_entry = entry;

	return 0;
}

开发者ID:458941968，项目名称:mini2440-kernel-2.6.29，代码行数:18，代码来源:hda_eld.c

示例16: snd_atiixp_pcm_open


//.........这里部分代码省略.........
	pci_set_master(pci);

	snd_atiixp_aclink_reset(chip);
	snd_atiixp_chip_start(chip);

	for (i = 0; i < NUM_ATI_CODECS; i++)
		snd_ac97_resume(chip->ac97[i]);

	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
	return 0;
}
#endif /*           */


#ifdef CONFIG_PROC_FS
/*
                                   
 */

static void snd_atiixp_proc_read(struct snd_info_entry *entry,
				 struct snd_info_buffer *buffer)
{
	struct atiixp_modem *chip = entry->private_data;
	int i;

	for (i = 0; i < 256; i += 4)
		snd_iprintf(buffer, "%02x: %08x\n", i, readl(chip->remap_addr + i));
}

static void __devinit snd_atiixp_proc_init(struct atiixp_modem *chip)
{
	struct snd_info_entry *entry;

	if (! snd_card_proc_new(chip->card, "atiixp-modem", &entry))
		snd_info_set_text_ops(entry, chip, snd_atiixp_proc_read);
}
#else
#define snd_atiixp_proc_init(chip)
#endif


/*
             
 */

static int snd_atiixp_free(struct atiixp_modem *chip)
{
	if (chip->irq < 0)
		goto __hw_end;
	snd_atiixp_chip_stop(chip);

      __hw_end:
	if (chip->irq >= 0)
		free_irq(chip->irq, chip);
	if (chip->remap_addr)
		iounmap(chip->remap_addr);
	pci_release_regions(chip->pci);
	pci_disable_device(chip->pci);
	kfree(chip);
	return 0;
}

static int snd_atiixp_dev_free(struct snd_device *device)
{
	struct atiixp_modem *chip = device->device_data;
	return snd_atiixp_free(chip);

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:67，代码来源:atiixp_modem.c

示例17: cs_proc_init

static void cs_proc_init(struct snd_ice1712 *ice)
{
	struct snd_info_entry *entry;
	if (! snd_card_proc_new(ice->card, "cs_codec", &entry))
		snd_info_set_text_ops(entry, ice, cs_proc_regs_read);
}

开发者ID:adis1313，项目名称:android_kernel_samsung_msm8974，代码行数:6，代码来源:pontis.c

示例18: i2s_register_proc_init

static void i2s_register_proc_init(struct snd_soc_card *card)
{
	struct snd_info_entry *entry;
	if (!snd_card_proc_new(card->snd_card, "i2s-reg", &entry))
		snd_info_set_text_ops(entry, NULL, i2s_register_proc_read);
}

开发者ID:Whiw，项目名称:hello-world，代码行数:6，代码来源:i2s-r0p0-null-codec.c

注：本文中的snd_card_proc_new函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。