C++ sleep_mode_enter函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sleep_mode_enter函数的典型用法代码示例。如果您正苦于以下问题：C++ sleep_mode_enter函数的具体用法？C++ sleep_mode_enter怎么用？C++ sleep_mode_enter使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sleep_mode_enter函数的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: bsp_event_handler

/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated when button is pressed.
 */
static void bsp_event_handler(bsp_event_t event)
{
    ret_code_t err_code;

    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break; // BSP_EVENT_SLEEP

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break; // BSP_EVENT_DISCONNECT

        case BSP_EVENT_WHITELIST_OFF:
            if (m_conn_handle == BLE_CONN_HANDLE_INVALID)
            {
                err_code = ble_advertising_restart_without_whitelist(&m_advertising);
                if (err_code != NRF_ERROR_INVALID_STATE)
                {
                    APP_ERROR_CHECK(err_code);
                }
            }
            break; // BSP_EVENT_KEY_0

        default:
            break;
    }
}

开发者ID:NordicSemiconductor，项目名称:nrf5-ble-tutorial-characteristic，代码行数:38，代码来源:main.c

示例2: bsp_event_handler

/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated by button press.
 */
void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;
    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_WHITELIST_OFF:
            whitelist_disable();
            break;

        default:
            break;
    }
}

开发者ID:451506709，项目名称:automated_machine，代码行数:29，代码来源:main.c

示例3: on_adv_evt

/**@brief Function for handling advertising events.
 *
 * @details This function will be called for advertising events which are passed to the application.
 *
 * @param[in] ble_adv_evt  Advertising event.
 */
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
    uint32_t err_code;

    switch (ble_adv_evt)
    {
        case BLE_ADV_EVT_DIRECTED:
            NRF_LOG_INFO("Directed advertising\r\n");
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_DIRECTED);
            APP_ERROR_CHECK(err_code);
            break; // BLE_ADV_EVT_DIRECTED

        case BLE_ADV_EVT_FAST:
            NRF_LOG_INFO("Fast advertising\r\n");
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
            APP_ERROR_CHECK(err_code);
            break; // BLE_ADV_EVT_FAST

        case BLE_ADV_EVT_SLOW:
            NRF_LOG_INFO("Slow advertising\r\n");
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_SLOW);
            APP_ERROR_CHECK(err_code);
            break; // BLE_ADV_EVT_SLOW

        case BLE_ADV_EVT_IDLE:
            sleep_mode_enter();
            break; // BLE_ADV_EVT_IDLE

        default:
            break;
    }
}

开发者ID:lyncxy119，项目名称:Sentry，代码行数:38，代码来源:main.c

示例4: bsp_event_handler

/**@brief Function for handling events from the BSP module.
 *
 * @param[in] event  Event generated by button press.
 */
static void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;
    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_ancs_c.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_WHITELIST_OFF:
            err_code = ble_advertising_restart_without_whitelist();
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_KEY_1:
            err_code = ble_ancs_c_request_attrs(&m_ancs_c, &m_notification_latest);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            break;
    }
}

开发者ID:henrychoi，项目名称:realtime，代码行数:39，代码来源:ble.c

示例5: on_adv_evt

/**@brief Function for handling advertising events.
 *
 * @details This function will be called for advertising events which are passed to the application.
 *
 * @param[in] ble_adv_evt  Advertising event.
 */
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
    uint32_t err_code;

    switch (ble_adv_evt)
    {
        case BLE_ADV_EVT_DIRECTED:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_DIRECTED);
            APP_ERROR_CHECK(err_code);
            break;//BLE_ADV_EVT_DIRECTED

        case BLE_ADV_EVT_FAST:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
            APP_ERROR_CHECK(err_code);
            break;//BLE_ADV_EVT_FAST

        case BLE_ADV_EVT_SLOW:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_SLOW);
            APP_ERROR_CHECK(err_code);
            break;//BLE_ADV_EVT_SLOW

        case BLE_ADV_EVT_IDLE:
            sleep_mode_enter();
            break;//BLE_ADV_EVT_IDLE

        default:
            break;
    }
}

开发者ID:IOIOI，项目名称:nRF51，代码行数:35，代码来源:main.c

示例6: bsp_event_handler

/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated when button is pressed.
 */
static void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;
    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_KEY_0:
            if (m_is_ias_present)
            {
                if (!m_is_high_alert_signalled)
                {
                    err_code = ble_ias_c_send_alert_level(&m_ias_c, BLE_CHAR_ALERT_LEVEL_HIGH_ALERT);
                }
                else
                {
                    err_code = ble_ias_c_send_alert_level(&m_ias_c, BLE_CHAR_ALERT_LEVEL_NO_ALERT);
                }

                if (err_code == NRF_SUCCESS)
                {
                    m_is_high_alert_signalled = !m_is_high_alert_signalled;
                }
                else if (
                    (err_code != BLE_ERROR_NO_TX_PACKETS)
                    &&
                    (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
                    &&
                    (err_code != NRF_ERROR_NOT_FOUND)
                    )
                {
                    APP_ERROR_HANDLER(err_code);
                }
            }
            break;

        case BSP_EVENT_KEY_1: //STOP_ALERTING_BUTTON_ID
            err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            break;
    }
}

开发者ID:JulianYG，项目名称:WNR，代码行数:59，代码来源:main.c

示例7: on_adv_evt

/**@brief Function for handling advertising events.
 *
 * @details This function will be called for advertising events which are passed to the application.
 *
 * @param[in] ble_adv_evt  Advertising event.
 */
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
    uint32_t err_code;

    switch (ble_adv_evt)
    {
        case BLE_ADV_EVT_DIRECTED:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_DIRECTED);
            APP_ERROR_CHECK(err_code);
            break;
        case BLE_ADV_EVT_FAST:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
            APP_ERROR_CHECK(err_code);
            break;
        case BLE_ADV_EVT_SLOW:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_SLOW);
            APP_ERROR_CHECK(err_code);
            break;
        case BLE_ADV_EVT_FAST_WHITELIST:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST);
            APP_ERROR_CHECK(err_code);
            break;
        case BLE_ADV_EVT_SLOW_WHITELIST:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST);
            APP_ERROR_CHECK(err_code);
            err_code = ble_advertising_restart_without_whitelist();
            APP_ERROR_CHECK(err_code);
            break;
        case BLE_ADV_EVT_IDLE:
            sleep_mode_enter();
            break;

        case BLE_ADV_EVT_WHITELIST_REQUEST:
        {
            ble_gap_whitelist_t whitelist;
            ble_gap_addr_t    * p_whitelist_addr[BLE_GAP_WHITELIST_ADDR_MAX_COUNT];
            ble_gap_irk_t     * p_whitelist_irk[BLE_GAP_WHITELIST_IRK_MAX_COUNT];

            whitelist.addr_count = BLE_GAP_WHITELIST_ADDR_MAX_COUNT;
            whitelist.irk_count  = BLE_GAP_WHITELIST_IRK_MAX_COUNT;
            whitelist.pp_addrs   = p_whitelist_addr;
            whitelist.pp_irks    = p_whitelist_irk;

            err_code = dm_whitelist_create(&m_app_handle, &whitelist);
            APP_ERROR_CHECK(err_code);

            err_code = ble_advertising_whitelist_reply(&whitelist);
            APP_ERROR_CHECK(err_code);
            break;
        }
        default:
            break;
    }
}

开发者ID:JulianYG，项目名称:WNR，代码行数:60，代码来源:main.c

示例8: bsp_event_handler

/**@brief Function for handling events from the BSP module.
 *
 * @param[in] event  Event generated by button press.
 */
static void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;

    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;//BSP_EVENT_SLEEP

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_ans_c.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;//BSP_EVENT_DISCONNECT

        case BSP_EVENT_WHITELIST_OFF:
            err_code = ble_advertising_restart_without_whitelist();
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;//BSP_EVENT_WHITELIST_OFF

        case BSP_EVENT_KEY_0:
            if (m_ans_c.conn_handle != BLE_CONN_HANDLE_INVALID)
            {
                new_alert_state_toggle();
            }
            break;//BSP_EVENT_KEY_0

        case BSP_EVENT_KEY_1:
            if (m_ans_c.conn_handle != BLE_CONN_HANDLE_INVALID)
            {
                unread_alert_state_toggle();
            }
            break;//BSP_EVENT_KEY_1

        case BSP_EVENT_KEY_2:
            if (m_ans_c.conn_handle != BLE_CONN_HANDLE_INVALID)
            {
                all_alert_notify_request();
            }
            break;//BSP_EVENT_KEY_2

        default:
            // No implementation needed.
            break;
    }
}

开发者ID:IOIOI，项目名称:nRF51，代码行数:57，代码来源:main.c

示例9: on_ble_evt

/**@brief Function for handling the Application's BLE Stack events.
 *
 * @param[in] p_ble_evt  Bluetooth stack event.
 */
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
    uint32_t        err_code      = NRF_SUCCESS;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);
            
            m_advertising_mode = BLE_NO_ADV;
            m_conn_handle      = p_ble_evt->evt.gap_evt.conn_handle;
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            err_code = bsp_indication_set(BSP_INDICATE_IDLE);
            APP_ERROR_CHECK(err_code);

            m_conn_handle = BLE_CONN_HANDLE_INVALID;

            advertising_start();
            break;

        case BLE_GAP_EVT_TIMEOUT:
            if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISING)
            {
                if (m_advertising_mode == BLE_SLEEP)
                {
                    sleep_mode_enter();
                }
                else
                {
                    advertising_start();
                }
            }
            break;

        case BLE_GATTC_EVT_TIMEOUT:
        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server and Client timeout events.
            err_code = sd_ble_gap_disconnect(m_conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}

开发者ID:RobinLin，项目名称:Espruino，代码行数:54，代码来源:main.c

示例10: on_adv_evt

/**@brief Function for handling advertising events.
 *
 * @details This function will be called for advertising events which are passed to the application.
 *
 * @param[in] ble_adv_evt  Advertising event.
 */
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
    uint32_t err_code;

    switch (ble_adv_evt)
    {
        case BLE_ADV_EVT_FAST:
            NRF_LOG_INFO("Fast advertising\r\n");
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
            APP_ERROR_CHECK(err_code);
            break;
        case BLE_ADV_EVT_IDLE:
            sleep_mode_enter();
            break;
        default:
            break;
    }
}

开发者ID:Goodjamp，项目名称:ble_app_template，代码行数:24，代码来源:main.c

示例11: bsp_event_handler

/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated by button press.
 */
void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;
    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_cts.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_WHITELIST_OFF:
            err_code = ble_advertising_restart_without_whitelist();
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_KEY_0:
            if (m_cts.conn_handle != BLE_CONN_HANDLE_INVALID)
            {
                err_code = ble_cts_c_current_time_read(&m_cts);
                if (err_code == NRF_ERROR_NOT_FOUND)
                {
                    NRF_LOG("Current Time Service is not discovered.\r\n");
                }
            }
            break;

        default:
            // No implementation needed.
            break;
    }
}

开发者ID:mrhexiaoheng，项目名称:nrf51_sdk11，代码行数:46，代码来源:main.c

示例12: on_adv_evt

/**@brief Function for handling the Application's BLE Stack events.
 *
 * @details This function will be called for advertising events which are passed to the application.
 *
 * @param[in] ble_adv_evt  Advertising event.
 */
static void on_adv_evt(ess_adv_evt_t ess_adv_evt)
{
    switch (ess_adv_evt)
    {
        case ESS_ADV_EVT_MODE_1:
            NRF_LOG_PRINTF("%s - ESS_ADV_EVT_MODE_1\r\n", __func__);
            break;

        case ESS_ADV_EVT_MODE_2:
            NRF_LOG_PRINTF("%s - ESS_ADV_EVT_MODE_2\r\n", __func__);
            break;

        case ESS_ADV_EVT_MODE_3:
            NRF_LOG_PRINTF("%s - ESS_ADV_EVT_MODE_3\r\n", __func__);
            m_adv_state = W_ADV_STATE_IDLE;
            break;
       
        case ESS_ADV_EVT_IDLE:
            NRF_LOG_PRINTF("%s - ESS_ADV_EVT_IDLE\r\n", __func__);
            NRF_LOG("[APP]: Going to sleep.\r\n\r\n\r\n");
            sleep_mode_enter();
            break;

        case ESS_ADV_EVT_WHITELIST_REQUEST:
        {
            NRF_LOG_PRINTF("%s - ESS_ADV_EVT_WHITELIST_REQUEST\r\n", __func__);
            ret_code_t err_code;
            // Storage for the whitelist.
            ble_gap_irk_t * irks[8];
            ble_gap_addr_t * addrs[8];
            ble_gap_whitelist_t whitelist = {.pp_irks = irks, .pp_addrs = addrs};
            // Construct a list of peer IDs.
            pm_peer_id_t peer_ids[8];
            pm_peer_id_t peer_id = pm_next_peer_id_get(PM_PEER_ID_INVALID);
            uint32_t n_peer_ids = 0;
            while((peer_id != PM_PEER_ID_INVALID) && (n_peer_ids < 8))
            {
                peer_ids[n_peer_ids++] = peer_id;
                peer_id = pm_next_peer_id_get(peer_id);
            }
            // Create the whitelist.
            err_code = pm_whitelist_create(peer_ids, n_peer_ids, &whitelist);
            APP_ERROR_CHECK(err_code);
            // Apply the whitelist.
            err_code = ess_advertising_whitelist_reply(&whitelist);
            APP_ERROR_CHECK(err_code);
            break;
        }

        case ESS_ADV_EVT_PEER_ADDR_REQUEST:
        {
            NRF_LOG_PRINTF("%s - ESS_ADV_EVT_PEER_ADDR_REQUEST\r\n", __func__);
//            ble_gap_addr_t peer_address;

//            // Only Give peer address if we have a handle to the bonded peer.
//            if(m_bonded_peer_handle.appl_id != DM_INVALID_ID)
//            {

//                err_code = dm_peer_addr_get(&m_bonded_peer_handle, &peer_address);
//                if (err_code != (NRF_ERROR_NOT_FOUND | DEVICE_MANAGER_ERR_BASE))
//                {
//                    APP_ERROR_CHECK(err_code);

//                    err_code = ble_advertising_peer_addr_reply(&peer_address);
//                    APP_ERROR_CHECK(err_code);
//                }

//            }
            break;
        }
        
        default:
            break;
    }
}

开发者ID:t21，项目名称:HomeHub，代码行数:81，代码来源:main.c

注：本文中的sleep_mode_enter函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sleep_ms函数代码示例发布时间：2022-05-30

C++ sleep_milliseconds函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19134|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ sleep_mode_enter函数代码示例

示例1: bsp_event_handler

示例2: bsp_event_handler

示例3: on_adv_evt

示例4: bsp_event_handler

示例5: on_adv_evt

示例6: bsp_event_handler

示例7: on_adv_evt

示例8: bsp_event_handler

示例9: on_ble_evt

示例10: on_adv_evt

示例11: bsp_event_handler

示例12: on_adv_evt

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

win7系统注册表编辑器打开的操作方法

PrismarineJS/prismarine-physics: Provide

微信小程序生成小程序码

MATPOWER/matpower: MATPOWER – steady st

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

客服电话

电子邮件

C++ sleep_mode_enter函数代码示例

示例1: bsp_event_handler

示例2: bsp_event_handler

示例3: on_adv_evt

示例4: bsp_event_handler

示例5: on_adv_evt

示例6: bsp_event_handler

示例7: on_adv_evt

示例8: bsp_event_handler

示例9: on_ble_evt

示例10: on_adv_evt

示例11: bsp_event_handler

示例12: on_adv_evt

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

win7系统注册表编辑器打开的操作方法

PrismarineJS/prismarine-physics: Provide

微信小程序 生成小程序码

MATPOWER/matpower: MATPOWER – steady st

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

微信小程序生成小程序码