C++ slapi_pblock_set函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中slapi_pblock_set函数的典型用法代码示例。如果您正苦于以下问题：C++ slapi_pblock_set函数的具体用法？C++ slapi_pblock_set怎么用？C++ slapi_pblock_set使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了slapi_pblock_set函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: oath_preop_init

int oath_preop_init(Slapi_PBlock *pb) {

    int rc;

    slapi_pblock_get(pb, SLAPI_PLUGIN_IDENTITY, &oath_preop_plugin_id);

    if (slapi_pblock_get(pb, SLAPI_PLUGIN_ARGC, (void *) &argc) != 0 ||
            slapi_pblock_get(pb, SLAPI_PLUGIN_ARGV, (void *) &argv)) {
        slapi_log_error(SLAPI_LOG_PLUGIN, "oath", "oath_preop_init: Failed to obtain plugin args, not registering plugin\n");
        return -1;
    }

    if (argc < 1) {
        slapi_log_error(SLAPI_LOG_PLUGIN, "oath", "oath_preop_init: No configuration given, not registering plugin\n");
        return -1;
    }

    if (slapi_pblock_set(pb, SLAPI_PLUGIN_VERSION, SLAPI_PLUGIN_VERSION_03) != 0 ||
            slapi_pblock_set(pb, SLAPI_PLUGIN_DESCRIPTION, (void *) &oath_preop_plugin_desc) != 0 ||
            slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_BIND_FN, (void *) oath_preop_bind) != 0 ||
            slapi_pblock_set(pb, SLAPI_PLUGIN_START_FN, (void *) oath_preop_start) != 0 ||
            slapi_pblock_set(pb, SLAPI_PLUGIN_CLOSE_FN, (void *) oath_preop_close) != 0) {
        slapi_log_error(SLAPI_LOG_PLUGIN, "oath",
                        "oath_preop_init: Error registering plugin\n");
        return -1;
    }

    slapi_log_error(SLAPI_LOG_PLUGIN, "oath", "oath_preop_init: Plugin successfully registered\n");

    return 0;

}

开发者ID:cargosoft，项目名称:oath-slapi，代码行数:32，代码来源:oath.c

示例2: mr_wrap_mr_index_sv_fn

/* this function takes SLAPI_PLUGIN_MR_VALUES as Slapi_Value ** and
   returns SLAPI_PLUGIN_MR_KEYS as Slapi_Value **
*/
static int
mr_wrap_mr_index_sv_fn(Slapi_PBlock* pb)
{
	int rc = -1;
	Slapi_Value **in_vals = NULL;
	Slapi_Value **out_vals = NULL;
	struct slapdplugin *pi = NULL;
	
	slapi_pblock_set(pb, SLAPI_PLUGIN_MR_KEYS, out_vals); /* make sure output is cleared */
	slapi_pblock_get(pb, SLAPI_PLUGIN, &pi);
	if (!pi) {
		slapi_log_err(SLAPI_LOG_ERR, "mr_wrap_mr_index_sv_fn", "No plugin specified\n");
	} else if (!pi->plg_mr_values2keys) {
		slapi_log_err(SLAPI_LOG_ERR, "mr_wrap_mr_index_sv_fn", "Plugin has no plg_mr_values2keys function\n");
	} else {
		struct mr_private *mrpriv = NULL;
		int ftype = plugin_mr_get_type(pi);
		slapi_pblock_get(pb, SLAPI_PLUGIN_MR_VALUES, &in_vals);
		(*pi->plg_mr_values2keys)(pb, in_vals, &out_vals, ftype);
		slapi_pblock_set(pb, SLAPI_PLUGIN_MR_KEYS, out_vals);
		/* we have to save out_vals to free next time or during destroy */
		slapi_pblock_get(pb, SLAPI_PLUGIN_OBJECT, &mrpriv);
		
		/* In case SLAPI_PLUGIN_OBJECT is not set 
		 * (e.g. custom index/filter create function did not initialize it
		 */
		if (mrpriv) {
			mr_private_indexer_done(mrpriv); /* free old vals, if any */
			mrpriv->sva = out_vals; /* save pointer for later */
		}
		rc = 0;
	}
	return rc;
}

开发者ID:Firstyear，项目名称:ds，代码行数:37，代码来源:plugin_mr.c

示例3: acct_postop_init

int
acct_postop_init( Slapi_PBlock *pb )
{
	void *plugin_id = get_identity();

	if ( slapi_pblock_set( pb, SLAPI_PLUGIN_VERSION,
				SLAPI_PLUGIN_VERSION_01 ) != 0 ||
		slapi_pblock_set( pb, SLAPI_PLUGIN_DESCRIPTION,
					(void *)&post_plugin_desc ) != 0 ) {
			slapi_log_err(SLAPI_LOG_ERR, POST_PLUGIN_NAME,
						"acct_postop_init - Failed to set plugin version or name\n" );
			return( CALLBACK_ERR );
	}


	if ( slapi_pblock_set( pb, SLAPI_PLUGIN_POST_BIND_FN, (void *)acct_bind_postop ) != 0 ||
	     slapi_pblock_set(pb, SLAPI_PLUGIN_POST_ADD_FN, (void *) acct_post_op) != 0 ||
		 slapi_pblock_set(pb, SLAPI_PLUGIN_POST_MODIFY_FN, (void *) acct_post_op) != 0)
	{
		slapi_log_err(SLAPI_LOG_ERR, POST_PLUGIN_NAME,
				"acct_postop_init - Failed to set plugin callback function\n" );
		return( CALLBACK_ERR );
	}

	if( slapi_pblock_get( pb, SLAPI_PLUGIN_IDENTITY, &plugin_id ) != 0 ) {
		slapi_log_err(SLAPI_LOG_ERR, POST_PLUGIN_NAME,
				"acct_postop_init - Failed to get plugin identity\n" );
		return( CALLBACK_ERR );
	}

	return( CALLBACK_OK );
}

开发者ID:Firstyear，项目名称:ds，代码行数:32，代码来源:acct_init.c

示例4: usn_bepostop_init

static int
usn_bepostop_init(Slapi_PBlock *pb)
{
    int rc = 0;
    Slapi_Entry *plugin_entry = NULL;
    char *plugin_type = NULL;
    int postadd = SLAPI_PLUGIN_BE_POST_ADD_FN;
    int postmod = SLAPI_PLUGIN_BE_POST_MODIFY_FN;
    int postmdn = SLAPI_PLUGIN_BE_POST_MODRDN_FN;
    int postdel = SLAPI_PLUGIN_BE_POST_DELETE_FN;

    if ((slapi_pblock_get(pb, SLAPI_PLUGIN_CONFIG_ENTRY, &plugin_entry) == 0) &&
        plugin_entry &&
        (plugin_type = slapi_entry_attr_get_charptr(plugin_entry,
                                                    "nsslapd-plugintype")) &&
        plugin_type && strstr(plugin_type, "betxn")) {
        postadd = SLAPI_PLUGIN_BE_TXN_POST_ADD_FN;
        postmod = SLAPI_PLUGIN_BE_TXN_POST_MODIFY_FN;
        postmdn = SLAPI_PLUGIN_BE_TXN_POST_MODRDN_FN;
        postdel = SLAPI_PLUGIN_BE_TXN_POST_DELETE_FN;
    }
    slapi_ch_free_string(&plugin_type);

    if ((slapi_pblock_set(pb, postadd, (void *)usn_bepostop) != 0) ||
        (slapi_pblock_set(pb, postdel, (void *)usn_bepostop_delete) != 0) ||
        (slapi_pblock_set(pb, postmod, (void *)usn_bepostop_modify) != 0) ||
        (slapi_pblock_set(pb, postmdn, (void *)usn_bepostop) != 0)) {
        slapi_log_error(SLAPI_LOG_FATAL, USN_PLUGIN_SUBSYSTEM,
                     "usn_bepostop_init: failed to register bepostop plugin\n");
        rc = -1;
    }

    return rc;
}

开发者ID:leto，项目名称:389-ds，代码行数:34，代码来源:usn.c

示例5: sidgen_task_init

int sidgen_task_init(Slapi_PBlock *pb)
{
    int ret = 0;

    ret = slapi_pblock_get(pb, SLAPI_PLUGIN_IDENTITY,
                           &global_sidgen_plugin_id);
    if (ret != 0 || global_sidgen_plugin_id == NULL) {
        LOG_FATAL("Plugin identity not available.\n");
        ret = (ret != 0) ? ret : EINVAL;
        goto done;
    }

    ret = slapi_pblock_set(pb, SLAPI_PLUGIN_VERSION,
                            (void *) SLAPI_PLUGIN_VERSION_03);

    ret |= slapi_pblock_set(pb, SLAPI_PLUGIN_START_FN,
                            (void *) sigden_task_start);

done:
    if (ret != 0) {
        LOG_FATAL("Failed to initialize plug-in\n" );
    }

    return ret;
}

开发者ID:jtux270，项目名称:translate，代码行数:25，代码来源:ipa_sidgen_task.c

示例6: be_unbindall

void
be_unbindall(Connection *conn, Operation *op)
{
    int     i;
    Slapi_PBlock pb = {0};

    for ( i = 0; i < maxbackends; i++ )
    {
        if ( backends[i] && (backends[i]->be_unbind != NULL) )
        {
            /* This is the modern, and faster way to do pb memset(0) 
             * It also doesn't trigger the HORRIBLE stack overflows I found ...
             */
            pblock_init_common( &pb, backends[i], conn, op );

            if ( plugin_call_plugins( &pb, SLAPI_PLUGIN_PRE_UNBIND_FN ) == 0 )
            {
                int rc = 0;
                slapi_pblock_set( &pb, SLAPI_PLUGIN, backends[i]->be_database );
                if(backends[i]->be_state != BE_STATE_DELETED && 
                   backends[i]->be_unbind!=NULL)
                {
                    rc = (*backends[i]->be_unbind)( &pb );
                }
                slapi_pblock_set( &pb, SLAPI_PLUGIN_OPRETURN, &rc );
                (void) plugin_call_plugins( &pb, SLAPI_PLUGIN_POST_UNBIND_FN );
            }
        }
    }
}

开发者ID:Firstyear，项目名称:ds，代码行数:30，代码来源:backend_manager.c

示例7: slapi_delete_internal_set_pb

/* Initialize a pblock for a call to slapi_delete_internal_pb() */
void
slapi_delete_internal_set_pb (Slapi_PBlock *pb,
                              const char *rawdn,
                              LDAPControl **controls, const char *uniqueid, 
                              Slapi_ComponentId *plugin_identity, 
                              int operation_flags)
{  
	Operation *op;
	PR_ASSERT (pb != NULL);
	if (pb == NULL || rawdn == NULL)
	{
		slapi_log_error(SLAPI_LOG_FATAL, NULL, 
						"slapi_delete_internal_set_pb: NULL parameter\n");
		return;
	}

	op = internal_operation_new(SLAPI_OPERATION_DELETE,operation_flags);
	slapi_pblock_set(pb, SLAPI_OPERATION, op);
	slapi_pblock_set(pb, SLAPI_ORIGINAL_TARGET, (void*)rawdn);
	slapi_pblock_set(pb, SLAPI_CONTROLS_ARG, controls);
	if (uniqueid)
	{
		slapi_pblock_set(pb, SLAPI_TARGET_UNIQUEID, (void*)uniqueid);
	}
	slapi_pblock_set(pb, SLAPI_PLUGIN_IDENTITY, plugin_identity);
}

开发者ID:leto，项目名称:389-ds，代码行数:27，代码来源:delete.c

示例8: passthruauth_init

/*
 * Plugin initialization function (which must be listed in the appropriate
 * slapd config file).
 */
int
passthruauth_init( Slapi_PBlock *pb )
{
    PASSTHRU_ASSERT( pb != NULL );

    slapi_log_error( SLAPI_LOG_PLUGIN, PASSTHRU_PLUGIN_SUBSYSTEM,
	    "=> passthruauth_init\n" );

    if ( slapi_pblock_set( pb, SLAPI_PLUGIN_VERSION,
		    (void *)SLAPI_PLUGIN_VERSION_01 ) != 0
	    || slapi_pblock_set( pb, SLAPI_PLUGIN_DESCRIPTION,
		    (void *)&pdesc ) != 0
	    || slapi_pblock_set( pb, SLAPI_PLUGIN_START_FN,
		    (void *)passthru_bindpreop_start ) != 0
	    || slapi_pblock_set( pb, SLAPI_PLUGIN_PRE_BIND_FN,
		    (void *)passthru_bindpreop ) != 0
	    || slapi_pblock_set( pb, SLAPI_PLUGIN_CLOSE_FN,
		    (void *)passthru_bindpreop_close ) != 0  ) {
	slapi_log_error( SLAPI_LOG_FATAL, PASSTHRU_PLUGIN_SUBSYSTEM,
		"passthruauth_init failed\n" );
	return( -1 );
    }

    slapi_log_error( SLAPI_LOG_PLUGIN, PASSTHRU_PLUGIN_SUBSYSTEM,
	"<= passthruauth_init succeeded\n" );

    return( 0 );
}

开发者ID:leto，项目名称:389-ds，代码行数:32，代码来源:ptpreop.c

示例9: bitwise_filter_create

static int
bitwise_filter_create (Slapi_PBlock* pb)
{
    auto int rc = LDAP_UNAVAILABLE_CRITICAL_EXTENSION; /* failed to initialize */
    auto char* mrOID = NULL;
    auto char* mrTYPE = NULL;
    auto struct berval* mrVALUE = NULL;

    if (!slapi_pblock_get (pb, SLAPI_PLUGIN_MR_OID, &mrOID) && mrOID != NULL &&
	!slapi_pblock_get (pb, SLAPI_PLUGIN_MR_TYPE, &mrTYPE) && mrTYPE != NULL &&
	!slapi_pblock_get (pb, SLAPI_PLUGIN_MR_VALUE, &mrVALUE) && mrVALUE != NULL) {

	struct bitwise_match_cb *bmc = NULL;
	if (strcmp(mrOID, "1.2.840.113556.1.4.803") == 0) {
	    slapi_pblock_set (pb, SLAPI_PLUGIN_MR_FILTER_MATCH_FN, (void*)bitwise_filter_match_and);
	} else if (strcmp(mrOID, "1.2.840.113556.1.4.804") == 0) {
	    slapi_pblock_set (pb, SLAPI_PLUGIN_MR_FILTER_MATCH_FN, (void*)bitwise_filter_match_or);
	} else { /* this oid not handled by this plugin */
	    LDAPDebug (LDAP_DEBUG_FILTER, "=> bitwise_filter_create OID (%s) not handled\n", mrOID, 0, 0);
	    return rc;
	}
	bmc = new_bitwise_match_cb(mrTYPE, mrVALUE);
	slapi_pblock_set (pb, SLAPI_PLUGIN_OBJECT, bmc);
	slapi_pblock_set (pb, SLAPI_PLUGIN_DESTROY_FN, (void*)bitwise_filter_destroy);
	rc = LDAP_SUCCESS;
    } else {
	LDAPDebug (LDAP_DEBUG_FILTER, "=> bitwise_filter_create missing parameter(s)\n", 0, 0, 0);
    }
    LDAPDebug (LDAP_DEBUG_FILTER, "<= bitwise_filter_create %i\n", rc, 0, 0);
    return LDAP_SUCCESS;
}

开发者ID:leto，项目名称:389-ds，代码行数:31，代码来源:bitwise.c

示例10: ipa_topo_pre_add

int ipa_topo_pre_add(Slapi_PBlock *pb)
{
    int result = SLAPI_PLUGIN_SUCCESS;
    char *errtxt  = NULL;

    slapi_log_error(SLAPI_LOG_PLUGIN, IPA_TOPO_PLUGIN_SUBSYSTEM,
                    "--> ipa_topo_pre_add\n");

    if (0 == ipa_topo_get_plugin_active()) {
        slapi_log_error(SLAPI_LOG_PLUGIN, IPA_TOPO_PLUGIN_SUBSYSTEM,
                    "<-- ipa_topo_pre_add - plugin not active\n");
        return 0;
    }

    if (ipa_topo_pre_ignore_op(pb)) return result;

    if (ipa_topo_is_entry_managed(pb)) {
        int rc = LDAP_UNWILLING_TO_PERFORM;
        errtxt = slapi_ch_smprintf("Entry is managed by topology plugin."
                                   " Adding of entry not allowed.\n");
        slapi_pblock_set(pb, SLAPI_PB_RESULT_TEXT, errtxt);
        slapi_pblock_set(pb, SLAPI_RESULT_CODE, &rc);
        result = SLAPI_PLUGIN_FAILURE;
    } else if (ipa_topo_check_segment_is_valid(pb, &errtxt)) {
        int rc = LDAP_UNWILLING_TO_PERFORM;
        slapi_pblock_set(pb, SLAPI_PB_RESULT_TEXT, errtxt);
        slapi_pblock_set(pb, SLAPI_RESULT_CODE, &rc);
        result = SLAPI_PLUGIN_FAILURE;
    }
    slapi_log_error(SLAPI_LOG_PLUGIN, IPA_TOPO_PLUGIN_SUBSYSTEM,
                    "<-- ipa_topo_pre_add\n");
    return result;
}

开发者ID:LiptonB，项目名称:freeipa，代码行数:33，代码来源:topology_pre.c

示例11: replication_legacy_plugin_init

/* Initialize the legacy replication plugin */
int
replication_legacy_plugin_init(Slapi_PBlock *pb)
{
    static int legacy_initialised= 0;
    int rc= 0; /* OK */
	void *identity = NULL;

	slapi_pblock_get (pb, SLAPI_PLUGIN_IDENTITY, &identity);
	PR_ASSERT (identity);
	repl_set_plugin_identity (PLUGIN_LEGACY_REPLICATION, identity);

	if(rc==0 && !legacy_initialised)
	{
	    rc= slapi_pblock_set( pb, SLAPI_PLUGIN_VERSION, SLAPI_PLUGIN_VERSION_01 );
	    rc= slapi_pblock_set( pb, SLAPI_PLUGIN_DESCRIPTION, (void *)&legacydesc );
	    rc= slapi_pblock_set( pb, SLAPI_PLUGIN_START_FN, (void *) legacy_start );
	    rc= slapi_pblock_set( pb, SLAPI_PLUGIN_CLOSE_FN, (void *) legacy_stop );
	    rc= slapi_pblock_set( pb, SLAPI_PLUGIN_POSTSTART_FN, (void *) legacy_poststart );
		
		/* Register the plugin interfaces we implement */
        rc= slapi_register_plugin("preoperation", 1 /* Enabled */, "legacy_preop_init", legacy_preop_init, "Legacy replication preoperation plugin", NULL, identity);
        rc= slapi_register_plugin("postoperation", 1 /* Enabled */, "legacy_postop_init", legacy_postop_init, "Legacy replication postoperation plugin", NULL, identity);
        rc= slapi_register_plugin("internalpreoperation", 1 /* Enabled */, "legacy_internalpreop_init", legacy_internalpreop_init, "Legacy replication internal preoperation plugin", NULL,  identity);
        rc= slapi_register_plugin("internalpostoperation", 1 /* Enabled */, "legacy_internalpostop_init", legacy_internalpostop_init, "Legacy replication internal postoperation plugin", NULL,  identity);		
		rc= slapi_register_plugin("entry", 1 /* Enabled */, "legacy_entry_init", legacy_entry_init, "Legacy replication entry plugin", NULL, identity);
		
		legacy_initialised= 1;
	}
	return rc;
}

开发者ID:Firstyear，项目名称:ds，代码行数:31，代码来源:repl_init.c

示例12: ipa_topo_pre_modrdn

int
ipa_topo_pre_modrdn(Slapi_PBlock *pb)
{

    int result = SLAPI_PLUGIN_SUCCESS;

    slapi_log_error(SLAPI_LOG_PLUGIN, IPA_TOPO_PLUGIN_SUBSYSTEM,
                    "--> ipa_topo_pre_modrdn\n");

    if (0 == ipa_topo_get_plugin_active()) {
        slapi_log_error(SLAPI_LOG_PLUGIN, IPA_TOPO_PLUGIN_SUBSYSTEM,
                    "<-- ipa_topo_pre_modrdn - plugin not active\n");
        return 0;
    }

    if (ipa_topo_pre_ignore_op(pb)) return result;

    if (ipa_topo_check_entry_move(pb)){
        int rc = LDAP_UNWILLING_TO_PERFORM;
        char *errtxt;
        errtxt = slapi_ch_smprintf("Moving of a segment or config entry "
                                   "to another subtree is not allowed.\n");
        slapi_pblock_set(pb, SLAPI_PB_RESULT_TEXT, errtxt);
        slapi_pblock_set(pb, SLAPI_RESULT_CODE, &rc);
        result = SLAPI_PLUGIN_FAILURE;
    }

    return result;

}

开发者ID:LiptonB，项目名称:freeipa，代码行数:30，代码来源:topology_pre.c

示例13: rename_internal_pb

static int rename_internal_pb (Slapi_PBlock *pb)
{
	LDAPControl		**controls;
    Operation       *op;
    int             opresult = 0;

	PR_ASSERT (pb != NULL);

	slapi_pblock_get(pb, SLAPI_CONTROLS_ARG, &controls);

	slapi_pblock_get(pb, SLAPI_OPERATION, &op); 
    op->o_handler_data   = &opresult;
    op->o_result_handler = internal_getresult_callback;

	slapi_pblock_set(pb, SLAPI_REQCONTROLS, controls);
    
	/* set parameters common for all internal operations */
	set_common_params (pb);

	/* set actions taken to process the operation */
	set_config_params (pb);

	op_shared_rename (pb, 0 /* not passing ownership of args */ );
    
	slapi_pblock_set(pb, SLAPI_PLUGIN_INTOP_RESULT, &opresult);

	return 0;
}

开发者ID:ohamada，项目名称:389ds，代码行数:28，代码来源:modrdn.c

示例14: slapi_rename_internal_set_pb_ext

void
slapi_rename_internal_set_pb_ext(Slapi_PBlock *pb,
                                 const Slapi_DN *olddn, 
                                 const char *newrdn,  /* normalized */
                                 const Slapi_DN *newsuperior, int deloldrdn, 
                                 LDAPControl **controls, const char *uniqueid,
                                 Slapi_ComponentId *plugin_identity, 
                                 int operation_flags)
{
    Operation *op;
    PR_ASSERT (pb != NULL);
    if (pb == NULL || olddn == NULL || newrdn == NULL)
    {
        slapi_log_error(SLAPI_LOG_FATAL, NULL, 
                        "slapi_rename_internal_set_pb: NULL parameter\n");
        return;
    }

    op = internal_operation_new(SLAPI_OPERATION_MODRDN,operation_flags); 
    slapi_pblock_set(pb, SLAPI_OPERATION, op); 
    slapi_pblock_set(pb, SLAPI_ORIGINAL_TARGET, 
                     (void*)slapi_sdn_get_dn(olddn));
    slapi_pblock_set(pb, SLAPI_MODRDN_TARGET_SDN, (void*)olddn);
    slapi_pblock_set(pb, SLAPI_MODRDN_NEWRDN, (void*)newrdn);
    slapi_pblock_set(pb, SLAPI_MODRDN_NEWSUPERIOR_SDN, (void*)newsuperior);
    slapi_pblock_set(pb, SLAPI_MODRDN_DELOLDRDN, &deloldrdn);
    slapi_pblock_set(pb, SLAPI_CONTROLS_ARG, controls);
       slapi_pblock_set(pb, SLAPI_MODIFY_MODS, NULL);
    if (uniqueid)
    {
        slapi_pblock_set(pb, SLAPI_TARGET_UNIQUEID, (void*)uniqueid);
    }
    slapi_pblock_set(pb, SLAPI_PLUGIN_IDENTITY, plugin_identity);
}

开发者ID:ohamada，项目名称:389ds，代码行数:34，代码来源:modrdn.c

示例15: ipa_topo_internal_postop_init

static int
ipa_topo_internal_postop_init(Slapi_PBlock *pb)
{
    int rc;
    rc = slapi_pblock_set(pb, SLAPI_PLUGIN_INTERNAL_POST_ADD_FN,
                          (void *)ipa_topo_post_add);
    rc |= slapi_pblock_set(pb, SLAPI_PLUGIN_INTERNAL_POST_DELETE_FN,
                           (void *)ipa_topo_post_del);
    return(rc);
}

开发者ID:borland667，项目名称:freeipa，代码行数:10，代码来源:topology_init.c

示例16: acl_preopInit

int
acl_preopInit (Slapi_PBlock *pb)
{
	int rc = 0;
	
	/* save plugin identity to later pass to internal operations */
	rc = slapi_pblock_get (pb, SLAPI_PLUGIN_IDENTITY, &g_acl_preop_plugin_identity);

	/* Declare plugin version */
	rc = slapi_pblock_set(pb, SLAPI_PLUGIN_VERSION, SLAPI_PLUGIN_VERSION_01);

    	/* Provide descriptive information */
	rc |=  slapi_pblock_set(pb, SLAPI_PLUGIN_DESCRIPTION, (void*)&pdesc);

	/* Register functions */
	rc |= slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_SEARCH_FN, (void*)aclplugin_preop_search);
	rc |= slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_COMPARE_FN, (void*)aclplugin_preop_search);
	rc |= slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_ADD_FN,    (void*)aclplugin_preop_modify);
	rc |= slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_MODIFY_FN, (void*)aclplugin_preop_modify);
	rc |= slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_MODRDN_FN, (void*)aclplugin_preop_modify);
	rc |= slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_DELETE_FN, (void*)aclplugin_preop_modify);

#if 0
	/*
	 * XXXmcs: In order to support access control checking from
	 * extended operations, we need a SLAPI_PLUGIN_PRE_EXTENDED_FN hook.
	 * But today no such entry point exists.
	 */
	rc |= slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_EXTENDED_FN, (void*)aclplugin_preop_modify);
#endif


        slapi_log_err(SLAPI_LOG_PLUGIN, plugin_name, "<= acl_preop_Init %d\n", rc );
        return( rc );
}

开发者ID:Firstyear，项目名称:ds，代码行数:35，代码来源:aclplugin.c

示例17: sampletask_init

/* 
 * Init function
 * Specified in the plugin entry as "nsslapd-pluginInitfunc: sampletask_init"
 */
int
sampletask_init( Slapi_PBlock *pb )
{
    int rc = 0;
	rc = slapi_pblock_set( pb, SLAPI_PLUGIN_VERSION,
                                    (void *) SLAPI_PLUGIN_VERSION_03 );
    rc |= slapi_pblock_set( pb, SLAPI_PLUGIN_START_FN,
                                    (void *) task_sampletask_start );

    return rc;
}

开发者ID:Firstyear，项目名称:ds，代码行数:15，代码来源:sampletask.c

示例18: slapi_search_internal_callback_pb

int
slapi_search_internal_callback_pb( Slapi_PBlock *pb,
	void *callback_data,
	plugin_result_callback prc,
	plugin_search_entry_callback psec,
	plugin_referral_entry_callback prec )
{
	int			free_filter = 0;
	SlapReply		*rs;

	if ( pb == NULL ) {
		return -1;
	}

	PBLOCK_ASSERT_INTOP( pb, LDAP_REQ_SEARCH );

	rs = pb->pb_rs;

	/* search callback and arguments */
	slapi_pblock_set( pb, SLAPI_X_INTOP_RESULT_CALLBACK,         (void *)prc );
	slapi_pblock_set( pb, SLAPI_X_INTOP_SEARCH_ENTRY_CALLBACK,   (void *)psec );
	slapi_pblock_set( pb, SLAPI_X_INTOP_REFERRAL_ENTRY_CALLBACK, (void *)prec );
	slapi_pblock_set( pb, SLAPI_X_INTOP_CALLBACK_DATA,           (void *)callback_data );

	if ( BER_BVISEMPTY( &pb->pb_op->ors_filterstr )) {
		rs->sr_err = LDAP_PARAM_ERROR;
		goto cleanup;
	}

	if ( pb->pb_op->ors_filter == NULL ) {
		pb->pb_op->ors_filter = slapi_str2filter( pb->pb_op->ors_filterstr.bv_val );
		if ( pb->pb_op->ors_filter == NULL ) {
			rs->sr_err = LDAP_PROTOCOL_ERROR;
			goto cleanup;
		}

		free_filter = 1;
	}

	slapi_int_func_internal_pb( pb, op_search );

cleanup:
	if ( free_filter ) {
		slapi_filter_free( pb->pb_op->ors_filter, 1 );
		pb->pb_op->ors_filter = NULL;
	}

	slapi_pblock_delete_param( pb, SLAPI_X_INTOP_RESULT_CALLBACK );
	slapi_pblock_delete_param( pb, SLAPI_X_INTOP_SEARCH_ENTRY_CALLBACK );
	slapi_pblock_delete_param( pb, SLAPI_X_INTOP_REFERRAL_ENTRY_CALLBACK );
	slapi_pblock_delete_param( pb, SLAPI_X_INTOP_CALLBACK_DATA );

	return 0;
}

开发者ID:dago，项目名称:openldap，代码行数:54，代码来源:slapi_ops.c

示例19: addrdnvalues_preop_init

int addrdnvalues_preop_init(Slapi_PBlock *pb)
{
	if (slapi_pblock_set(pb, SLAPI_PLUGIN_VERSION, SLAPI_PLUGIN_VERSION_03) != 0 ||
	    slapi_pblock_set(pb, SLAPI_PLUGIN_DESCRIPTION, &pluginDescription) != 0 ||
	    slapi_pblock_set(pb, SLAPI_PLUGIN_PRE_ADD_FN, (void *)addrdnvalues_preop_add) != 0) {
		slapi_log_error(SLAPI_LOG_PLUGIN, "addrdnvalues_preop_init",
				"Error registering %s\n", pluginDescription.spd_description);
		return -1;
	}

	return 0;
}

开发者ID:1ack，项目名称:Impala，代码行数:12，代码来源:addrdnvalues.c

示例20: consumer_connection_extension_destructor

/* consumer connection extension destructor */
void consumer_connection_extension_destructor (void *ext, void *object, void *parent)
{
	PRUint64 connid = 0;
	if (ext)
	{
		/* Check to see if this replication session has acquired
		 * a replica. If so, release it here.
		 */
		consumer_connection_extension *connext = (consumer_connection_extension *)ext;
		if (NULL != connext->replica_acquired)
		{
            Replica *r = object_get_data ((Object*)connext->replica_acquired);
			/* If a total update was in progress, abort it */
			if (REPL_PROTOCOL_50_TOTALUPDATE == connext->repl_protocol_version)
			{
				Slapi_PBlock *pb = slapi_pblock_new();
				const Slapi_DN *repl_root_sdn = replica_get_root(r);
				PR_ASSERT(NULL != repl_root_sdn);
				if (NULL != repl_root_sdn)
				{
					slapi_pblock_set(pb, SLAPI_CONNECTION, connext->connection);
					slapi_pblock_set(pb, SLAPI_TARGET_SDN, (void*)repl_root_sdn);
					slapi_pblock_get(pb, SLAPI_CONN_ID, &connid);
					slapi_log_error(SLAPI_LOG_REPL, repl_plugin_name,
									"Aborting total update in progress for replicated "
									"area %s connid=%" NSPRIu64 "\n", slapi_sdn_get_dn(repl_root_sdn),
									connid);
					slapi_stop_bulk_import(pb);
				}
				else
				{
					slapi_log_error(SLAPI_LOG_FATAL, repl_plugin_name,
						"consumer_connection_extension_destructor: can't determine root "
						"of replicated area.\n");
				}
				slapi_pblock_destroy(pb);

				/* allow reaping again */
				replica_set_tombstone_reap_stop(r, PR_FALSE);
			}
			replica_relinquish_exclusive_access(r, connid, -1);
            object_release ((Object*)connext->replica_acquired);
			connext->replica_acquired = NULL;
		}

        if (connext->supplier_ruv)
        {
            ruv_destroy ((RUV **)&connext->supplier_ruv);
        }
		connext->connection = NULL;
		slapi_ch_free((void **)&ext);	
	}
}

开发者ID:leto，项目名称:389-ds，代码行数:54，代码来源:repl_connext.c

注：本文中的slapi_pblock_set函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ slascl_函数代码示例发布时间：2022-05-30

C++ slapi_pblock_new函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19134|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ slapi_pblock_set函数代码示例

示例1: oath_preop_init

示例2: mr_wrap_mr_index_sv_fn

示例3: acct_postop_init

示例4: usn_bepostop_init

示例5: sidgen_task_init

示例6: be_unbindall

示例7: slapi_delete_internal_set_pb

示例8: passthruauth_init

示例9: bitwise_filter_create

示例10: ipa_topo_pre_add

示例11: replication_legacy_plugin_init

示例12: ipa_topo_pre_modrdn

示例13: rename_internal_pb

示例14: slapi_rename_internal_set_pb_ext

示例15: ipa_topo_internal_postop_init

示例16: acl_preopInit

示例17: sampletask_init

示例18: slapi_search_internal_callback_pb

示例19: addrdnvalues_preop_init

示例20: consumer_connection_extension_destructor

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

win7系统注册表编辑器打开的操作方法

PrismarineJS/prismarine-physics: Provide

微信小程序 生成小程序码

MATPOWER/matpower: MATPOWER – steady st

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

微信小程序生成小程序码