C++ skb_set_tail_pointer函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中skb_set_tail_pointer函数的典型用法代码示例。如果您正苦于以下问题：C++ skb_set_tail_pointer函数的具体用法？C++ skb_set_tail_pointer怎么用？C++ skb_set_tail_pointer使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了skb_set_tail_pointer函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: get_current_link

/**
 * SIPC header_create() family functions
 *
 * Create SIPC5 header
 *
 * sipc5_hdr_create_skb()
 *	Create common SIPC5 header
 *
 * sipc5_hdr_create_legacy_rfs()
 *	Create SIPC5 header with IPC4.1 RFS header
 *	Because IMC modem used the 256KB rfs packet and RILD check the full
 *	packet with RFS header len, kernel remove the SIPC5 header and add the
 *	lagacy RFS header.
 *
 * sipc5_hdr_create_multifmt()
 *	TBD
 *
 * sipc5_hdr_create_skb_handover()
 *	Remove the ethernet frame When use `handover' with Network Bridge,
 *	user -> bridge device(rmnet0) -> real rmnet(xxxx_rmnet0) -> here.
 *	bridge device is ethernet device unlike xxxx_rmnet(net device).
 *	We remove the an ethernet header of skb before using skb->len,
 *	because bridge device added an ethernet header to skb.
 *
 * RETURN
 *	Returns the socket buffer that added SIPC5 header.
 *
 **/
static struct sk_buff *sipc5_hdr_create(struct io_device *iod,
				struct sipc_hdr *hdr, struct sk_buff *skb)
{
	struct sipc5_link_hdr *sipc5h;
	struct link_device *ld = get_current_link(iod);

	if (skb->len > 0xFFFF - SIPC5_HDR_LEN_MAX) {
		sipc5h = (struct sipc5_link_hdr *)
					skb_push(skb, SIPC5_HDR_LEN_EXT);
		sipc5h->cfg = SIPC5_HDR_CFG_START | SIPC5_HDR_EXT;
		*((u32 *)&sipc5h->len) = (u32)(skb->len);
	} else {
		sipc5h = (struct sipc5_link_hdr *)
					skb_push(skb, SIPC5_HDR_LEN);
		sipc5h->cfg = SIPC5_HDR_CFG_START;
		sipc5h->len = (u16)(skb->len);
	}
	sipc5h->ch = iod->id;

	/* Should check the alignment for dynamic switch link dev*/
	if (ld->aligned) {
		sipc5h->cfg |= SIPC5_HDR_PAD;
		skb_set_tail_pointer(skb, SIPC_ALIGN(skb->len));
		skb->len = SIPC_ALIGN(skb->len);
	}
	skbpriv(skb)->sipch = (void *)sipc5h;
	return skb;
}

开发者ID:DerTeufel，项目名称:SGS3-Sourcedrops，代码行数:56，代码来源:sipc5_io_device.c

示例2: linux_if_rx

static int
linux_if_rx(struct vr_interface *vif, struct vr_packet *pkt)
{
    int rc;
    struct net_device *dev = (struct net_device *)vif->vif_os;
    struct sk_buff *skb = vp_os_packet(pkt);
    struct vr_ip *ip;
    unsigned short network_off, transport_off, cksum_off = 0;

    skb->data = pkt->vp_head + pkt->vp_data;
    skb->len = pkt_len(pkt);
    skb_set_tail_pointer(skb, pkt_head_len(pkt));

    if (!dev) {
        kfree_skb(skb);
        goto exit_rx;
    }

    (void)__sync_fetch_and_add(&dev->stats.rx_bytes, skb->len);
    (void)__sync_fetch_and_add(&dev->stats.rx_packets, 1);

    /* this is only needed for mirroring */
    if ((pkt->vp_flags & VP_FLAG_FROM_DP) &&
            (pkt->vp_flags & VP_FLAG_CSUM_PARTIAL)) {
    	network_off = pkt_get_network_header_off(pkt);
    	ip = (struct vr_ip *)(pkt_data_at_offset(pkt, network_off));
    	transport_off = network_off + (ip->ip_hl * 4);

        if (ip->ip_proto == VR_IP_PROTO_TCP)
            cksum_off = offsetof(struct vr_tcp, tcp_csum);
        else if (ip->ip_proto == VR_IP_PROTO_UDP)

开发者ID:sysbot，项目名称:contrail-vrouter，代码行数:31，代码来源:vr_host_interface.c

示例3: RND4

static struct recv_buf *sd_recv_rxfifo(struct adapter *adapter, u32 size)
{
	u32 readsize, ret;
	u8 *readbuf;
	struct recv_priv *recv_priv;
	struct recv_buf	*recvbuf;


	/*  Patch for some SDIO Host 4 bytes issue */
	/*  ex. RK3188 */
	readsize = RND4(size);

	/* 3 1. alloc recvbuf */
	recv_priv = &adapter->recvpriv;
	recvbuf = rtw_dequeue_recvbuf(&recv_priv->free_recv_buf_queue);
	if (!recvbuf) {
		DBG_871X_LEVEL(_drv_err_, "%s: alloc recvbuf FAIL!\n", __func__);
		return NULL;
	}

	/* 3 2. alloc skb */
	if (!recvbuf->pskb) {
		SIZE_PTR tmpaddr = 0;
		SIZE_PTR alignment = 0;

		recvbuf->pskb = rtw_skb_alloc(MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ);

		if (recvbuf->pskb) {
			recvbuf->pskb->dev = adapter->pnetdev;

			tmpaddr = (SIZE_PTR)recvbuf->pskb->data;
			alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1);
			skb_reserve(recvbuf->pskb, (RECVBUFF_ALIGN_SZ - alignment));
		}

		if (!recvbuf->pskb) {
			DBG_871X("%s: alloc_skb fail! read =%d\n", __func__, readsize);
			return NULL;
		}
	}

	/* 3 3. read data from rxfifo */
	readbuf = recvbuf->pskb->data;
	ret = sdio_read_port(&adapter->iopriv.intf, WLAN_RX0FF_DEVICE_ID, readsize, readbuf);
	if (ret == _FAIL) {
		RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("%s: read port FAIL!\n", __func__));
		return NULL;
	}


	/* 3 4. init recvbuf */
	recvbuf->len = size;
	recvbuf->phead = recvbuf->pskb->head;
	recvbuf->pdata = recvbuf->pskb->data;
	skb_set_tail_pointer(recvbuf->pskb, size);
	recvbuf->ptail = skb_tail_pointer(recvbuf->pskb);
	recvbuf->pend = skb_end_pointer(recvbuf->pskb);

	return recvbuf;
}

开发者ID:Lyude，项目名称:linux，代码行数:60，代码来源:sdio_ops.c

示例4: net1080_tx_fixup

static struct sk_buff *
net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
	struct sk_buff		*skb2;
	struct nc_header	*header = NULL;
	struct nc_trailer	*trailer = NULL;
	int			padlen = sizeof (struct nc_trailer);
	int			len = skb->len;

	if (!((len + padlen + sizeof (struct nc_header)) & 0x01))
		padlen++;
	if (!skb_cloned(skb)) {
		int	headroom = skb_headroom(skb);
		int	tailroom = skb_tailroom(skb);

		if (padlen <= tailroom &&
		    sizeof(struct nc_header) <= headroom)
			/* There's enough head and tail room */
			goto encapsulate;

		if ((sizeof (struct nc_header) + padlen) <
				(headroom + tailroom)) {
			/* There's enough total room, so just readjust */
			skb->data = memmove(skb->head
						+ sizeof (struct nc_header),
					    skb->data, skb->len);
			skb_set_tail_pointer(skb, len);
			goto encapsulate;
		}
	}

	/* Create a new skb to use with the correct size */
	skb2 = skb_copy_expand(skb,
				sizeof (struct nc_header),
				padlen,
				flags);
	dev_kfree_skb_any(skb);
	if (!skb2)
		return skb2;
	skb = skb2;

encapsulate:
	/* header first */
	header = (struct nc_header *) skb_push(skb, sizeof *header);
	header->hdr_len = cpu_to_le16(sizeof (*header));
	header->packet_len = cpu_to_le16(len);
	header->packet_id = cpu_to_le16((u16)dev->xid++);

	/* maybe pad; then trailer */
	if (!((skb->len + sizeof *trailer) & 0x01))
		*skb_put(skb, 1) = PAD_BYTE;
	trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);
	put_unaligned(header->packet_id, &trailer->packet_id);
#if 0
	netdev_dbg(dev->net, "frame >tx h %d p %d id %d\n",
		   header->hdr_len, header->packet_len,
		   header->packet_id);
#endif
	return skb;
}

开发者ID:020gzh，项目名称:linux，代码行数:60，代码来源:net1080.c

示例5: r8712_recv_indicatepkt

void r8712_recv_indicatepkt(struct _adapter *padapter,
			    union recv_frame *precv_frame)
{
	struct recv_priv *precvpriv;
	struct  __queue	*pfree_recv_queue;
	_pkt *skb;
	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;

	precvpriv = &(padapter->recvpriv);
	pfree_recv_queue = &(precvpriv->free_recv_queue);
	skb = precv_frame->u.hdr.pkt;
	if (skb == NULL)
		goto _recv_indicatepkt_drop;
	skb->data = precv_frame->u.hdr.rx_data;
	skb->len = precv_frame->u.hdr.len;
	skb_set_tail_pointer(skb, skb->len);
	if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1))
		skb->ip_summed = CHECKSUM_UNNECESSARY;
	else
		skb->ip_summed = CHECKSUM_NONE;
	skb->dev = padapter->pnetdev;
	skb->protocol = eth_type_trans(skb, padapter->pnetdev);
	netif_rx(skb);
	precv_frame->u.hdr.pkt = NULL; /* pointers to NULL before
					* r8712_free_recvframe() */
	r8712_free_recvframe(precv_frame, pfree_recv_queue);
	return;
_recv_indicatepkt_drop:
	 /*enqueue back to free_recv_queue*/
	 if (precv_frame)
		r8712_free_recvframe(precv_frame, pfree_recv_queue);
	 precvpriv->rx_drop++;
}

开发者ID:Abioy，项目名称:kasan，代码行数:33，代码来源:recv_linux.c

示例6: sd_recv_rxfifo

static struct recv_buf* sd_recv_rxfifo(PADAPTER padapter, u32 size)
{
	u32 readsize, ret;
	u8 *preadbuf;
	struct recv_priv *precvpriv;
	struct recv_buf	*precvbuf;


	readsize = size;

	//3 1. alloc recvbuf
	precvpriv = &padapter->recvpriv;
	precvbuf = rtw_dequeue_recvbuf(&precvpriv->free_recv_buf_queue);
	if (precvbuf == NULL) {
		RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("%s: alloc recvbuf FAIL!\n", __FUNCTION__));
		return NULL;
	}

	//3 2. alloc skb
	if (precvbuf->pskb == NULL) {
		SIZE_PTR tmpaddr=0;
		SIZE_PTR alignment=0;

		precvbuf->pskb = rtw_skb_alloc(MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ);

		if(precvbuf->pskb)
		{
			precvbuf->pskb->dev = padapter->pnetdev;

			tmpaddr = (SIZE_PTR)precvbuf->pskb->data;
			alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1);
			skb_reserve(precvbuf->pskb, (RECVBUFF_ALIGN_SZ - alignment));
		}

		if (precvbuf->pskb == NULL) {
			DBG_871X("%s: alloc_skb fail! read=%d\n", __FUNCTION__, readsize);
			return NULL;
		}
	}

	//3 3. read data from rxfifo
	preadbuf = precvbuf->pskb->data;
//	rtw_read_port(padapter, WLAN_RX0FF_DEVICE_ID, readsize, preadbuf);
	ret = sdio_read_port(&padapter->iopriv.intf, WLAN_RX0FF_DEVICE_ID, readsize, preadbuf);
	if (ret == _FAIL) {
		RT_TRACE(_module_hci_ops_os_c_, _drv_err_, ("%s: read port FAIL!\n", __FUNCTION__));
		return NULL;
	}


	//3 4. init recvbuf
	precvbuf->len = readsize;
	precvbuf->phead = precvbuf->pskb->head;
	precvbuf->pdata = precvbuf->pskb->data;
	skb_set_tail_pointer(precvbuf->pskb, readsize);
	precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
	precvbuf->pend = skb_end_pointer(precvbuf->pskb);

	return precvbuf;
}

开发者ID:OpenLD，项目名称:linux-wetek-3.10.y，代码行数:60，代码来源:sdio_ops.c

示例7: rtw_recv_indicatepkt

int rtw_recv_indicatepkt(_adapter *padapter, union recv_frame *precv_frame)
{
	struct recv_priv *precvpriv;
	_queue	*pfree_recv_queue;
	_pkt *skb;
	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;

	DBG_COUNTER(padapter->rx_logs.os_indicate);

	precvpriv = &(padapter->recvpriv);
	pfree_recv_queue = &(precvpriv->free_recv_queue);

	skb = precv_frame->u.hdr.pkt;
	if (skb == NULL)
	{
		RT_TRACE(_module_recv_osdep_c_, _drv_err_, ("rtw_recv_indicatepkt():skb ==NULL something wrong!!!!\n"));
		goto _recv_indicatepkt_drop;
	}

	RT_TRACE(_module_recv_osdep_c_, _drv_info_, ("rtw_recv_indicatepkt():skb != NULL !!!\n"));
	RT_TRACE(_module_recv_osdep_c_, _drv_info_, ("rtw_recv_indicatepkt():precv_frame->u.hdr.rx_head =%p  precv_frame->hdr.rx_data =%p\n", precv_frame->u.hdr.rx_head, precv_frame->u.hdr.rx_data));
	RT_TRACE(_module_recv_osdep_c_, _drv_info_, ("precv_frame->hdr.rx_tail =%p precv_frame->u.hdr.rx_end =%p precv_frame->hdr.len =%d \n", precv_frame->u.hdr.rx_tail, precv_frame->u.hdr.rx_end, precv_frame->u.hdr.len));

	skb->data = precv_frame->u.hdr.rx_data;

	skb_set_tail_pointer(skb, precv_frame->u.hdr.len);

	skb->len = precv_frame->u.hdr.len;

	RT_TRACE(_module_recv_osdep_c_, _drv_info_, ("\n skb->head =%p skb->data =%p skb->tail =%p skb->end =%p skb->len =%d\n", skb->head, skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len));

#ifdef CONFIG_AUTO_AP_MODE
	if (0x8899 == pattrib->eth_type)
	{
		rtw_os_ksocket_send(padapter, precv_frame);

		/* goto _recv_indicatepkt_drop; */
	}
#endif /* CONFIG_AUTO_AP_MODE */

	rtw_os_recv_indicate_pkt(padapter, skb, pattrib);

	precv_frame->u.hdr.pkt = NULL; /*  pointers to NULL before rtw_free_recvframe() */

	rtw_free_recvframe(precv_frame, pfree_recv_queue);

	RT_TRACE(_module_recv_osdep_c_, _drv_info_, ("\n rtw_recv_indicatepkt :after rtw_os_recv_indicate_pkt!!!!\n"));

        return _SUCCESS;

_recv_indicatepkt_drop:

	 /* enqueue back to free_recv_queue */
	 if (precv_frame)
		 rtw_free_recvframe(precv_frame, pfree_recv_queue);

	 DBG_COUNTER(padapter->rx_logs.os_indicate_err);
	 return _FAIL;
}

开发者ID:jasonabele，项目名称:rtl8723bs，代码行数:59，代码来源:recv_linux.c

示例8: rtw_skb_alloc

_pkt *rtw_os_alloc_msdu_pkt(union recv_frame *prframe, u16 nSubframe_Length, u8 *pdata)
{
	u16	eth_type;
	u8	*data_ptr;
	_pkt *sub_skb;
	struct rx_pkt_attrib *pattrib;

	pattrib = &prframe->u.hdr.attrib;

#ifdef CONFIG_SKB_COPY
	sub_skb = rtw_skb_alloc(nSubframe_Length + 12);
	if(sub_skb)
	{
		skb_reserve(sub_skb, 12);
		data_ptr = (u8 *)skb_put(sub_skb, nSubframe_Length);
		_rtw_memcpy(data_ptr, (pdata + ETH_HLEN), nSubframe_Length);
	}
	else
#endif // CONFIG_SKB_COPY
	{
		sub_skb = rtw_skb_clone(prframe->u.hdr.pkt);
		if(sub_skb)
		{
			sub_skb->data = pdata + ETH_HLEN;
			sub_skb->len = nSubframe_Length;
			skb_set_tail_pointer(sub_skb, nSubframe_Length);
		}
		else
		{
			DBG_871X("%s(): rtw_skb_clone() Fail!!!\n",__FUNCTION__);
			return NULL;
		}
	}

	eth_type = RTW_GET_BE16(&sub_skb->data[6]);

	if (sub_skb->len >= 8 &&
		((_rtw_memcmp(sub_skb->data, rtw_rfc1042_header, SNAP_SIZE) &&
		  eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) ||
		 _rtw_memcmp(sub_skb->data, rtw_bridge_tunnel_header, SNAP_SIZE) )) {
		/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */
		skb_pull(sub_skb, SNAP_SIZE);
		_rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src, ETH_ALEN);
		_rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst, ETH_ALEN);
	} else {
		u16 len;
		/* Leave Ethernet header part of hdr and full payload */
		len = htons(sub_skb->len);
		_rtw_memcpy(skb_push(sub_skb, 2), &len, 2);
		_rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src, ETH_ALEN);
		_rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst, ETH_ALEN);
	}

	return sub_skb;
}

开发者ID:neverhover，项目名称:rtl8821au，代码行数:55，代码来源:recv_linux.c

示例9: skb_headroom

static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
		struct sk_buff *skb, gfp_t flags)
{
	int pack_len = skb->len;
	int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE;
	int headroom = skb_headroom(skb);
	int tailroom = skb_tailroom(skb);
	int need_tail = 0;
	__le16 *len;

	/*                                                              */
	if ((pack_with_header_len) < dev->maxpacket)
		need_tail = dev->maxpacket - pack_with_header_len + 1;
	/*
                                                                    
                                                                     
                                 
  */
	else if (!(pack_with_header_len % dev->maxpacket))
		need_tail = 1;

	if (!skb_cloned(skb) &&
			(headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) {
		if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) {
			skb->data = memmove(skb->head + INT51X1_HEADER_SIZE,
					skb->data, skb->len);
			skb_set_tail_pointer(skb, skb->len);
		}
	} else {
		struct sk_buff *skb2;

		skb2 = skb_copy_expand(skb,
				INT51X1_HEADER_SIZE,
				need_tail,
				flags);
		dev_kfree_skb_any(skb);
		if (!skb2)
			return NULL;
		skb = skb2;
	}

	pack_len += need_tail;
	pack_len &= 0x07ff;

	len = (__le16 *) __skb_push(skb, INT51X1_HEADER_SIZE);
	*len = cpu_to_le16(pack_len);

	if(need_tail)
		memset(__skb_put(skb, need_tail), 0, need_tail);

	return skb;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:52，代码来源:int51x1.c

示例10: rndis_tx_fixup

static struct sk_buff *
rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
	struct rndis_data_hdr	*hdr;
	struct sk_buff		*skb2;
	unsigned		len = skb->len;

	if (likely(!skb_cloned(skb))) {
		int	room = skb_headroom(skb);

		/* enough head room as-is? */
		if (unlikely((sizeof *hdr) <= room))
			goto fill;

		/* enough room, but needs to be readjusted? */
		room += skb_tailroom(skb);
		if (likely((sizeof *hdr) <= room)) {
			skb->data = memmove(skb->head + sizeof *hdr,
					    skb->data, len);
			skb_set_tail_pointer(skb, len);
			goto fill;
		}
	}

	/* create a new skb, with the correct size (and tailpad) */
	skb2 = skb_copy_expand(skb, sizeof *hdr, 1, flags);
	dev_kfree_skb_any(skb);
	if (unlikely(!skb2))
		return skb2;
	skb = skb2;

	/* fill out the RNDIS header.  we won't bother trying to batch
	 * packets; Linux minimizes wasted bandwidth through tx queues.
	 */
fill:
	hdr = (void *) __skb_push(skb, sizeof *hdr);
	memset(hdr, 0, sizeof *hdr);
	hdr->msg_type = RNDIS_MSG_PACKET;
	hdr->msg_len = cpu_to_le32(skb->len);
	hdr->data_offset = ccpu2(sizeof(*hdr) - 8);
	hdr->data_len = cpu_to_le32(len);

	/* FIXME make the last packet always be short ... */
	return skb;
}

开发者ID:amalrajt，项目名称:linux-sh4-2.6.23.17_stm23_A18B，代码行数:45，代码来源:rndis_host.c

示例11: rtw_recv_monitor

int rtw_recv_monitor(_adapter *padapter, union recv_frame *precv_frame)
{
	int ret = _FAIL;
	struct recv_priv *precvpriv;
	_queue	*pfree_recv_queue;
	_pkt *skb;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct rx_pkt_attrib *pattrib;

	if (NULL == precv_frame)
		goto _recv_drop;

	pattrib = &precv_frame->u.hdr.attrib;
	precvpriv = &(padapter->recvpriv);
	pfree_recv_queue = &(precvpriv->free_recv_queue);

	skb = precv_frame->u.hdr.pkt;
	if (skb == NULL) {
		DBG_871X("%s :skb==NULL something wrong!!!!\n", __func__);
		goto _recv_drop;
	}

	skb->data = precv_frame->u.hdr.rx_data;
	skb_set_tail_pointer(skb, precv_frame->u.hdr.len);
	skb->len = precv_frame->u.hdr.len;
	skb->ip_summed = CHECKSUM_NONE;
	skb->pkt_type = PACKET_OTHERHOST;
	skb->protocol = htons(0x0019); /* ETH_P_80211_RAW */

	rtw_netif_rx(padapter->pnetdev, skb);

	/* pointers to NULL before rtw_free_recvframe() */
	precv_frame->u.hdr.pkt = NULL;

	ret = _SUCCESS;

_recv_drop:

	/* enqueue back to free_recv_queue */
	if (precv_frame)
		rtw_free_recvframe(precv_frame, pfree_recv_queue);

	return ret;

}

开发者ID:neverhover，项目名称:rtl8821au，代码行数:45，代码来源:recv_linux.c

示例12: genelink_tx_fixup

static struct sk_buff *
genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
	int 	padlen;
	int	length = skb->len;
	int	headroom = skb_headroom(skb);
	int	tailroom = skb_tailroom(skb);
	__le32	*packet_count;
	__le32	*packet_len;

	// FIXME:  magic numbers, bleech
	padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;

	if ((!skb_cloned(skb))
			&& ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
		if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
			skb->data = memmove(skb->head + (4 + 4*1),
					     skb->data, skb->len);
			skb_set_tail_pointer(skb, skb->len);
		}
	} else {
		struct sk_buff	*skb2;
		skb2 = skb_copy_expand(skb, (4 + 4*1) , padlen, flags);
		dev_kfree_skb_any(skb);
		skb = skb2;
		if (!skb)
			return NULL;
	}

	// attach the packet count to the header
	packet_count = (__le32 *) skb_push(skb, (4 + 4*1));
	packet_len = packet_count + 1;

	*packet_count = cpu_to_le32(1);
	*packet_len = cpu_to_le32(length);

	// add padding byte
	if ((skb->len % dev->maxpacket) == 0)
		skb_put(skb, 1);

	return skb;
}

开发者ID:mb3dot，项目名称:community-b3-kernel，代码行数:42，代码来源:gl620a.c

示例13: pkt_to_skb

struct cfpkt *cfpkt_append(struct cfpkt *dstpkt,
			     struct cfpkt *addpkt,
			     u16 expectlen)
{
	struct sk_buff *dst = pkt_to_skb(dstpkt);
	struct sk_buff *add = pkt_to_skb(addpkt);
	u16 addlen = skb_headlen(add);
	u16 neededtailspace;
	struct sk_buff *tmp;
	u16 dstlen;
	u16 createlen;
	if (unlikely(is_erronous(dstpkt) || is_erronous(addpkt))) {
		cfpkt_destroy(addpkt);
		return dstpkt;
	}
	if (expectlen > addlen)
		neededtailspace = expectlen;
	else
		neededtailspace = addlen;

	if (dst->tail + neededtailspace > dst->end) {
		/* Create a dumplicate of 'dst' with more tail space */
		struct cfpkt *tmppkt;
		dstlen = skb_headlen(dst);
		createlen = dstlen + neededtailspace;
		tmppkt = cfpkt_create(createlen + PKT_PREFIX + PKT_POSTFIX);
		if (tmppkt == NULL)
			return NULL;
		tmp = pkt_to_skb(tmppkt);
		skb_set_tail_pointer(tmp, dstlen);
		tmp->len = dstlen;
		memcpy(tmp->data, dst->data, dstlen);
		cfpkt_destroy(dstpkt);
		dst = tmp;
	}
	memcpy(skb_tail_pointer(dst), add->data, skb_headlen(add));
	cfpkt_destroy(addpkt);
	dst->tail += addlen;
	dst->len += addlen;
	return skb_to_pkt(dst);
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:41，代码来源:cfpkt_skbuff.c

示例14: get_current_link

static struct sk_buff *sipc5_hdr_create_ipcloopback(struct io_device *iod,
				struct sipc_hdr *hdr, struct sk_buff *skb)
{
	struct sipc5_link_hdr *sipc5h;
	struct link_device *ld = get_current_link(iod);

	sipc5h = (struct sipc5_link_hdr *)
				skb_push(skb, SIPC5_HDR_LEN);
	sipc5h->cfg = SIPC5_HDR_CFG_START;
	sipc5h->len = (u16)(skb->len);

	mif_info("send ipcloopback data: %d\n", skb->len);
	sipc5h->ch = SIPC5_CH_ID_FMT_0;

	/* Should check the alignment for dynamic switch link dev*/
	if (ld->aligned) {
		sipc5h->cfg |= SIPC5_HDR_PAD;
		skb_set_tail_pointer(skb, SIPC_ALIGN(skb->len));
		skb->len = SIPC_ALIGN(skb->len);
	}
	skbpriv(skb)->sipch = (void *)sipc5h;
	return skb;
}

开发者ID:lssjbrolli，项目名称:android_kernel_samsung_klimtlte，代码行数:23，代码来源:sipc5_io_device.c

示例15: pkt_to_skb

struct cfpkt *cfpkt_split(struct cfpkt *pkt, u16 pos)
{
	struct sk_buff *skb2;
	struct sk_buff *skb = pkt_to_skb(pkt);
	struct cfpkt *tmppkt;
	u8 *split = skb->data + pos;
	u16 len2nd = skb_tail_pointer(skb) - split;

	if (unlikely(is_erronous(pkt)))
		return NULL;

	if (skb->data + pos > skb_tail_pointer(skb)) {
		PKT_ERROR(pkt, "trying to split beyond end of packet\n");
		return NULL;
	}

	/* Create a new packet for the second part of the data */
	tmppkt = cfpkt_create_pfx(len2nd + PKT_PREFIX + PKT_POSTFIX,
				  PKT_PREFIX);
	if (tmppkt == NULL)
		return NULL;
	skb2 = pkt_to_skb(tmppkt);


	if (skb2 == NULL)
		return NULL;

	/* Reduce the length of the original packet */
	skb_set_tail_pointer(skb, pos);
	skb->len = pos;

	memcpy(skb2->data, split, len2nd);
	skb2->tail += len2nd;
	skb2->len += len2nd;
	skb2->priority = skb->priority;
	return skb_to_pkt(skb2);
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:37，代码来源:cfpkt_skbuff.c

示例16: rtw_recv_indicatepkt

int rtw_recv_indicatepkt(struct adapter *padapter,
			 struct recv_frame *precv_frame)
{
	struct recv_priv *precvpriv;
	struct __queue *pfree_recv_queue;
	struct sk_buff *skb;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;


	precvpriv = &(padapter->recvpriv);
	pfree_recv_queue = &(precvpriv->free_recv_queue);

	skb = precv_frame->pkt;
	if (!skb) {
		RT_TRACE(_module_recv_osdep_c_, _drv_err_,
			 ("rtw_recv_indicatepkt():skb == NULL something wrong!!!!\n"));
		goto _recv_indicatepkt_drop;
	}

	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("rtw_recv_indicatepkt():skb != NULL !!!\n"));
	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("rtw_recv_indicatepkt():precv_frame->rx_head =%p  precv_frame->hdr.rx_data =%p\n",
		 precv_frame->rx_head, precv_frame->rx_data));
	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("precv_frame->hdr.rx_tail =%p precv_frame->rx_end =%p precv_frame->hdr.len =%d\n",
		 precv_frame->rx_tail, precv_frame->rx_end,
		 precv_frame->len));

	skb->data = precv_frame->rx_data;

	skb_set_tail_pointer(skb, precv_frame->len);

	skb->len = precv_frame->len;

	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("skb->head =%p skb->data =%p skb->tail =%p skb->end =%p skb->len =%d\n",
		 skb->head, skb->data, skb_tail_pointer(skb),
		 skb_end_pointer(skb), skb->len));

	if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
		struct sk_buff *pskb2 = NULL;
		struct sta_info *psta = NULL;
		struct sta_priv *pstapriv = &padapter->stapriv;
		struct rx_pkt_attrib *pattrib = &precv_frame->attrib;
		int bmcast = IS_MCAST(pattrib->dst);

		if (memcmp(pattrib->dst, myid(&padapter->eeprompriv),
			   ETH_ALEN)) {
			if (bmcast) {
				psta = rtw_get_bcmc_stainfo(padapter);
				pskb2 = skb_clone(skb, GFP_ATOMIC);
			} else {
				psta = rtw_get_stainfo(pstapriv, pattrib->dst);
			}

			if (psta) {
				struct net_device *pnetdev;

				pnetdev = (struct net_device *)padapter->pnetdev;
				skb->dev = pnetdev;
				skb_set_queue_mapping(skb, rtw_recv_select_queue(skb));

				rtw_xmit_entry(skb, pnetdev);

				if (bmcast)
					skb = pskb2;
				else
					goto _recv_indicatepkt_end;
			}
		}
	}

	rcu_read_lock();
	rcu_dereference(padapter->pnetdev->rx_handler_data);
	rcu_read_unlock();

	skb->ip_summed = CHECKSUM_NONE;
	skb->dev = padapter->pnetdev;
	skb->protocol = eth_type_trans(skb, padapter->pnetdev);

	netif_rx(skb);

_recv_indicatepkt_end:

	/*  pointers to NULL before rtw_free_recvframe() */
	precv_frame->pkt = NULL;

	rtw_free_recvframe(precv_frame, pfree_recv_queue);

	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("\n rtw_recv_indicatepkt :after netif_rx!!!!\n"));


	return _SUCCESS;

_recv_indicatepkt_drop:

	 /* enqueue back to free_recv_queue */
	rtw_free_recvframe(precv_frame, pfree_recv_queue);
//.........这里部分代码省略.........

开发者ID:513855417，项目名称:linux，代码行数:101，代码来源:recv_linux.c

示例17: rtw_recv_indicatepkt

void rtw_recv_indicatepkt(_adapter *padapter, union recv_frame *precv_frame)
{	
       struct recv_priv *precvpriv;
       _queue	*pfree_recv_queue;	     
	_pkt *skb;	
	struct mlme_priv*pmlmepriv = &padapter->mlmepriv;
#ifdef CONFIG_RTL8712_TCP_CSUM_OFFLOAD_RX
	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
#endif

_func_enter_;

	precvpriv = &(padapter->recvpriv);	
	pfree_recv_queue = &(precvpriv->free_recv_queue);	
     
#ifdef CONFIG_DRVEXT_MODULE		
	if (drvext_rx_handler(padapter, precv_frame->u.hdr.rx_data, precv_frame->u.hdr.len) == _SUCCESS)
	{		
		rtw_free_recvframe(precv_frame, pfree_recv_queue);
		return;
	}
#endif

	skb = precv_frame->u.hdr.pkt;	       
       if(skb == NULL)
       {        
            RT_TRACE(_module_recv_osdep_c_,_drv_err_,("rtw_recv_indicatepkt():skb==NULL something wrong!!!!\n"));		   
	     goto _recv_indicatepkt_drop;
	}

	   
	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("rtw_recv_indicatepkt():skb != NULL !!!\n"));		
	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("rtw_recv_indicatepkt():precv_frame->u.hdr.rx_head=%p  precv_frame->hdr.rx_data=%p\n", precv_frame->u.hdr.rx_head, precv_frame->u.hdr.rx_data));
	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("precv_frame->hdr.rx_tail=%p precv_frame->u.hdr.rx_end=%p precv_frame->hdr.len=%d \n", precv_frame->u.hdr.rx_tail, precv_frame->u.hdr.rx_end, precv_frame->u.hdr.len));
		
	skb->data = precv_frame->u.hdr.rx_data;
	
#ifdef NET_SKBUFF_DATA_USES_OFFSET	
	skb_set_tail_pointer(skb, precv_frame->u.hdr.len);
#else
	skb->tail = precv_frame->u.hdr.rx_tail;
#endif

	skb->len = precv_frame->u.hdr.len;
	
	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("\n skb->head=%p skb->data=%p skb->tail=%p skb->end=%p skb->len=%d\n", skb->head, skb->data, skb->tail, skb->end, skb->len));
	
	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)	 	
	{	 	
	 	_pkt *pskb2=NULL;
	 	struct sta_info *psta = NULL;
	 	struct sta_priv *pstapriv = &padapter->stapriv;	
		struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;	
		int bmcast = IS_MCAST(pattrib->dst);

		//DBG_871X("bmcast=%d\n", bmcast);

		if(_rtw_memcmp(pattrib->dst, myid(&padapter->eeprompriv), ETH_ALEN)==_FALSE)		
		{
			psta = rtw_get_stainfo(pstapriv, pattrib->dst);

			//DBG_871X("not ap psta=%p, addr=%pM\n", psta, pattrib->dst);

			if(bmcast)
			{
				pskb2 = skb_clone(skb, GFP_ATOMIC);	
			}

			if(psta)
			{
				//DBG_871X("directly forwarding to the xmit_entry\n");

				//skb->ip_summed = CHECKSUM_NONE;	
				//skb->protocol = eth_type_trans(skb, pnetdev);

				skb->dev = padapter->pnetdev;	
				rtw_xmit_entry(skb, padapter->pnetdev);			
		
				if(bmcast == _FALSE)				
				        goto _recv_indicatepkt_end;			
			
			}

			if(bmcast)
				skb = pskb2;
			
		}
		else// to APself
		{
			//DBG_871X("to APSelf\n");
		}
		
	}


	
#ifdef CONFIG_RTL8712_TCP_CSUM_OFFLOAD_RX
        if ( (pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1) ) {
		skb->ip_summed = CHECKSUM_UNNECESSARY;
		//printk("CHECKSUM_UNNECESSARY \n");
//.........这里部分代码省略.........

开发者ID:FFTEAM，项目名称:open-duckbox-project-sh4-pingulux-git，代码行数:101，代码来源:recv_linux.c

示例18: eth_start_xmit

static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
					struct net_device *net)
{
	struct eth_dev		*dev = netdev_priv(net);
	int			length = skb->len;
	int			retval=0;
	struct usb_request	*req = NULL;
	unsigned long		flags;
	struct usb_ep		*in;
	u16			cdc_filter;
    struct rndis_msg    *msg = get_rndis_msg();
    struct pkt_msg      *r_q=NULL,*w_q = NULL;
    int index;
    struct sk_buff *skb_old;

	spin_lock_irqsave(&dev->lock, flags);
	if (dev->port_usb) {
		in = dev->port_usb->in_ep;
		cdc_filter = dev->port_usb->cdc_filter;
	} else {
		in = NULL;
		cdc_filter = 0;
	}
	spin_unlock_irqrestore(&dev->lock, flags);

	if (!in) {
		dev_kfree_skb_any(skb);
		return NETDEV_TX_OK;
	}

	/* apply outgoing CDC or RNDIS filters */
	if (!is_promisc(cdc_filter)) {
		u8		*dest = skb->data;

		if (is_multicast_ether_addr(dest)) {
			u16	type;

			/* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
			 * SET_ETHERNET_MULTICAST_FILTERS requests
			 */
			if (is_broadcast_ether_addr(dest))
				type = USB_CDC_PACKET_TYPE_BROADCAST;
			else
				type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
			if (!(cdc_filter & type)) {
				dev_kfree_skb_any(skb);
				return NETDEV_TX_OK;
			}
		}
		/* ignores USB_CDC_PACKET_TYPE_DIRECTED */
	}
    skb_old=skb;
    eth_alloc_req(net,&req,&w_q,skb);
    if(req == NULL)
        return NETDEV_TX_BUSY;
	/* no buffer copies needed, unless the network stack did it
	 * or the hardware can't use skb buffers.
	 * or there's not enough space for extra headers we need
	 */
	if (dev->wrap) {
		unsigned long	flags;

		spin_lock_irqsave(&dev->lock, flags);

		if (dev->port_usb)
			skb = dev->wrap(dev->port_usb, skb);
		spin_unlock_irqrestore(&dev->lock, flags);
		if (!skb)
			goto drop;

		length = skb->len;
	}
	/*
	 * Align data to 32bit if the dma controller requires it
	 */
	if (gadget_dma32(dev->gadget)) {
		unsigned long align = (unsigned long)skb->data & 3;
		if (WARN_ON(skb_headroom(skb) < align)) {
			dev_kfree_skb_any(skb);
			goto drop;
		} else if (align) {
			u8 *data = skb->data;
			size_t len = skb_headlen(skb);
			skb->data -= align;
			memmove(skb->data, data, len);
			skb_set_tail_pointer(skb, len);
		}
	}

    retval = 0;
    if(w_q==NULL)
		retval = save_to_queue(dev,msg,skb,req,&w_q);
	else if(skb!=skb_old)
		update_sbks_in_queue(w_q,skb,skb_old);

    if(retval == 0){
        spin_lock_irqsave(&msg->buffer_lock, flags);
        if(w_q && w_q->bit_map==FULL_BIT_MAP && (w_q->state != RNDIS_QUEUE_SEND)){
            msg->last_sent = w_q->q_idx;
            w_q->state = RNDIS_QUEUE_SEND;
//.........这里部分代码省略.........

开发者ID:dhs-shine，项目名称:sprd_project，代码行数:101，代码来源:u_ether.c

示例19: cdc_ncm_rx_fixup

static int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
{
	struct sk_buff *skb;
	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
	int len;
	int nframes;
	int x;
	int offset;
	struct usb_cdc_ncm_ndp16 *ndp16;
	struct usb_cdc_ncm_dpe16 *dpe16;
	int ndpoffset;
	int loopcount = 50; /* arbitrary max preventing infinite loop */

	ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in);
	if (ndpoffset < 0)
		goto error;

next_ndp:
	nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset);
	if (nframes < 0)
		goto error;

	ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);

	if (le32_to_cpu(ndp16->dwSignature) != USB_CDC_NCM_NDP16_NOCRC_SIGN) {
		pr_debug("invalid DPT16 signature <%u>\n",
			 le32_to_cpu(ndp16->dwSignature));
		goto err_ndp;
	}
	dpe16 = ndp16->dpe16;

	for (x = 0; x < nframes; x++, dpe16++) {
		offset = le16_to_cpu(dpe16->wDatagramIndex);
		len = le16_to_cpu(dpe16->wDatagramLength);

		/*
		 * CDC NCM ch. 3.7
		 * All entries after first NULL entry are to be ignored
		 */
		if ((offset == 0) || (len == 0)) {
			if (!x)
				goto err_ndp; /* empty NTB */
			break;
		}

		/* sanity checking */
		if (((offset + len) > skb_in->len) ||
				(len > ctx->rx_max) || (len < ETH_HLEN)) {
			pr_debug("invalid frame detected (ignored)"
					"offset[%u]=%u, length=%u, skb=%p\n",
					x, offset, len, skb_in);
			if (!x)
				goto err_ndp;
			break;

		} else {
			skb = skb_clone(skb_in, GFP_ATOMIC);
			if (!skb)
				goto error;
			skb->len = len;
			skb->data = ((u8 *)skb_in->data) + offset;
			skb_set_tail_pointer(skb, len);
			usbnet_skb_return(dev, skb);
		}
	}
err_ndp:
	/* are there more NDPs to process? */
	ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex);
	if (ndpoffset && loopcount--)
		goto next_ndp;

	return 1;
error:
	return 0;
}

开发者ID:smx-smx，项目名称:dsl-n55u，代码行数:75，代码来源:cdc_ncm.c

示例20: rtw_recv_indicatepkt

int rtw_recv_indicatepkt(_adapter *padapter, union recv_frame *precv_frame)
{
	struct recv_priv *precvpriv;
	_queue	*pfree_recv_queue;
	_pkt *skb;
	struct mlme_priv*pmlmepriv = &padapter->mlmepriv;
#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX
	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
#endif

#ifdef CONFIG_BR_EXT
	void *br_port = NULL;
#endif

_func_enter_;

	precvpriv = &(padapter->recvpriv);
	pfree_recv_queue = &(precvpriv->free_recv_queue);

#ifdef CONFIG_DRVEXT_MODULE
	if (drvext_rx_handler(padapter, precv_frame->u.hdr.rx_data, precv_frame->u.hdr.len) == _SUCCESS)
	{
		goto _recv_indicatepkt_drop;
	}
#endif

	skb = precv_frame->u.hdr.pkt;
	if(skb == NULL)
	{
		RT_TRACE(_module_recv_osdep_c_,_drv_err_,("rtw_recv_indicatepkt():skb==NULL something wrong!!!!\n"));
		goto _recv_indicatepkt_drop;
	}

	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("rtw_recv_indicatepkt():skb != NULL !!!\n"));		
	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("rtw_recv_indicatepkt():precv_frame->u.hdr.rx_head=%p  precv_frame->hdr.rx_data=%p\n", precv_frame->u.hdr.rx_head, precv_frame->u.hdr.rx_data));
	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("precv_frame->hdr.rx_tail=%p precv_frame->u.hdr.rx_end=%p precv_frame->hdr.len=%d \n", precv_frame->u.hdr.rx_tail, precv_frame->u.hdr.rx_end, precv_frame->u.hdr.len));

	skb->data = precv_frame->u.hdr.rx_data;

	skb_set_tail_pointer(skb, precv_frame->u.hdr.len);

	skb->len = precv_frame->u.hdr.len;

	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("\n skb->head=%p skb->data=%p skb->tail=%p skb->end=%p skb->len=%d\n", skb->head, skb->data, skb->tail, skb->end, skb->len));

	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
	{
	 	_pkt *pskb2=NULL;
	 	struct sta_info *psta = NULL;
	 	struct sta_priv *pstapriv = &padapter->stapriv;
		struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
		int bmcast = IS_MCAST(pattrib->dst);

		//DBG_871X("bmcast=%d\n", bmcast);

		if(_rtw_memcmp(pattrib->dst, myid(&padapter->eeprompriv), ETH_ALEN)==_FALSE)
		{
			//DBG_871X("not ap psta=%p, addr=%pM\n", psta, pattrib->dst);

			if(bmcast)
			{
				psta = rtw_get_bcmc_stainfo(padapter);
				pskb2 = rtw_skb_clone(skb);
			} else {
				psta = rtw_get_stainfo(pstapriv, pattrib->dst);
			}

			if(psta)
			{
				struct net_device *pnetdev= (struct net_device*)padapter->pnetdev;			

				//DBG_871X("directly forwarding to the rtw_xmit_entry\n");

				//skb->ip_summed = CHECKSUM_NONE;
				skb->dev = pnetdev;			
#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
				skb_set_queue_mapping(skb, rtw_recv_select_queue(skb));
#endif //LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)
			
				_rtw_xmit_entry(skb, pnetdev);
			
				if(bmcast)
					skb = pskb2;
				else
					goto _recv_indicatepkt_end;
			}


		}
		else// to APself
		{
			//DBG_871X("to APSelf\n");
		}
	}
	

#ifdef CONFIG_BR_EXT

#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
	br_port = padapter->pnetdev->br_port;
//.........这里部分代码省略.........

开发者ID:Anphamthanh，项目名称:rt8192cu，代码行数:101，代码来源:recv_linux.c

注：本文中的skb_set_tail_pointer函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ skb_set_transport_header函数代码示例发布时间：2022-05-30

C++ skb_set_owner_w函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19135|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ skb_set_tail_pointer函数代码示例

示例1: get_current_link

示例2: linux_if_rx

示例3: RND4

示例4: net1080_tx_fixup

示例5: r8712_recv_indicatepkt

示例6: sd_recv_rxfifo

示例7: rtw_recv_indicatepkt

示例8: rtw_skb_alloc

示例9: skb_headroom

示例10: rndis_tx_fixup

示例11: rtw_recv_monitor

示例12: genelink_tx_fixup

示例13: pkt_to_skb

示例14: get_current_link

示例15: pkt_to_skb

示例16: rtw_recv_indicatepkt

示例17: rtw_recv_indicatepkt

示例18: eth_start_xmit

示例19: cdc_ncm_rx_fixup

示例20: rtw_recv_indicatepkt

请发表评论

全部评论

上一篇：

下一篇：

Delphi中关于资源释放（Free/release/freeA

bradtraversy/iweather: Ionic 3 mobile we

CVE-2022-34918

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053