• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ skb_queue_empty函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中skb_queue_empty函数的典型用法代码示例。如果您正苦于以下问题:C++ skb_queue_empty函数的具体用法?C++ skb_queue_empty怎么用?C++ skb_queue_empty使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了skb_queue_empty函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rx_submit


//.........这里部分代码省略.........
	    default:
		state = rx_cleanup;
		dev->stats.rx_errors++;
		if (netif_msg_rx_err (dev))
			devdbg (dev, "rx status %d", urb_status);
		break;
	}

	state = defer_bh(dev, skb, &dev->rxq, state);

	if (urb) {
		if (netif_running (dev->net)
		    && !test_bit (EVENT_RX_HALT, &dev->flags) &&
		    state != unlink_start) {
			rx_submit (dev, urb, GFP_ATOMIC);
			return;
		}
		usb_free_urb (urb);
	}
	if (netif_msg_rx_err (dev))
		devdbg (dev, "no read resubmitted");
}

static void intr_complete (struct urb *urb)
{
	struct usbnet	*dev = urb->context;
	int		status = urb->status;

	switch (status) {
	    /* success */
	    case 0:
		dev->driver_info->status(dev, urb);
		break;

	    /* software-driven interface shutdown */
	    case -ENOENT:		// urb killed
	    case -ESHUTDOWN:		// hardware gone
		if (netif_msg_ifdown (dev))
			devdbg (dev, "intr shutdown, code %d", status);
		return;

	    /* NOTE:  not throttling like RX/TX, since this endpoint
	     * already polls infrequently
	     */
	    default:
		devdbg (dev, "intr status %d", status);
		break;
	}

	memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
	status = usb_submit_urb (urb, GFP_ATOMIC);
	if (status != 0 && netif_msg_timer (dev))
		deverr(dev, "intr resubmit --> %d", status);
}

/*-------------------------------------------------------------------------*/

// unlink pending rx/tx; completion handlers do all other cleanup

static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
{
	unsigned long		flags;
	struct sk_buff		*skb;
	int			count = 0;

	spin_lock_irqsave (&q->lock, flags);
	while (!skb_queue_empty(q)) {
		struct skb_data		*entry;
		struct urb		*urb;
		int			retval;

		skb_queue_walk(q, skb) {
		entry = (struct skb_data *) skb->cb;
			if (entry->state != unlink_start)
				goto found;
		}
		break;
found:
		entry->state = unlink_start;
		urb = entry->urb;

		/*
		 * Get reference count of the URB to avoid it to be
		 * freed during usb_unlink_urb, which may trigger
		 * use-after-free problem inside usb_unlink_urb since
		 * usb_unlink_urb is always racing with .complete
		 * handler(include defer_bh).
		 */
		usb_get_urb(urb);
		spin_unlock_irqrestore(&q->lock, flags);
		// during some PM-driven resume scenarios,
		// these (async) unlinks complete immediately
		retval = usb_unlink_urb (urb);
		if (retval != -EINPROGRESS && retval != 0)
			devdbg (dev, "unlink urb err, %d", retval);
		else
			count++;
		usb_put_urb(urb);
		spin_lock_irqsave(&q->lock, flags);
	}
开发者ID:qwerty1023,项目名称:wive-rtnl-firmware,代码行数:101,代码来源:usbnet.c


示例2: ip6_append_data

int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
	int offset, int len, int odd, struct sk_buff *skb),
	void *from, int length, int transhdrlen,
	int hlimit, int tclass, struct ipv6_txoptions *opt, struct flowi6 *fl6,
	struct rt6_info *rt, unsigned int flags, int dontfrag)
{
	struct inet_sock *inet = inet_sk(sk);
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct inet_cork *cork;
	struct sk_buff *skb, *skb_prev = NULL;
	unsigned int maxfraglen, fragheaderlen, mtu, orig_mtu;
	int exthdrlen;
	int dst_exthdrlen;
	int hh_len;
	int copy;
	int err;
	int offset = 0;
	int csummode = CHECKSUM_NONE;
	__u8 tx_flags = 0;

	if (flags&MSG_PROBE)
		return 0;
	cork = &inet->cork.base;
	if (skb_queue_empty(&sk->sk_write_queue)) {
		/*
		 * setup for corking
		 */
		if (opt) {
			if (WARN_ON(np->cork.opt))
				return -EINVAL;

			np->cork.opt = kzalloc(opt->tot_len, sk->sk_allocation);
			if (unlikely(np->cork.opt == NULL))
				return -ENOBUFS;

			np->cork.opt->tot_len = opt->tot_len;
			np->cork.opt->opt_flen = opt->opt_flen;
			np->cork.opt->opt_nflen = opt->opt_nflen;

			np->cork.opt->dst0opt = ip6_opt_dup(opt->dst0opt,
							    sk->sk_allocation);
			if (opt->dst0opt && !np->cork.opt->dst0opt)
				return -ENOBUFS;

			np->cork.opt->dst1opt = ip6_opt_dup(opt->dst1opt,
							    sk->sk_allocation);
			if (opt->dst1opt && !np->cork.opt->dst1opt)
				return -ENOBUFS;

			np->cork.opt->hopopt = ip6_opt_dup(opt->hopopt,
							   sk->sk_allocation);
			if (opt->hopopt && !np->cork.opt->hopopt)
				return -ENOBUFS;

			np->cork.opt->srcrt = ip6_rthdr_dup(opt->srcrt,
							    sk->sk_allocation);
			if (opt->srcrt && !np->cork.opt->srcrt)
				return -ENOBUFS;

			/* need source address above miyazawa*/
		}
		dst_hold(&rt->dst);
		cork->dst = &rt->dst;
		inet->cork.fl.u.ip6 = *fl6;
		np->cork.hop_limit = hlimit;
		np->cork.tclass = tclass;
		if (rt->dst.flags & DST_XFRM_TUNNEL)
			mtu = np->pmtudisc == IPV6_PMTUDISC_PROBE ?
			      rt->dst.dev->mtu : dst_mtu(&rt->dst);
		else
			mtu = np->pmtudisc == IPV6_PMTUDISC_PROBE ?
			      rt->dst.dev->mtu : dst_mtu(rt->dst.path);
		if (np->frag_size < mtu) {
			if (np->frag_size)
				mtu = np->frag_size;
		}
		cork->fragsize = mtu;
		if (dst_allfrag(rt->dst.path))
			cork->flags |= IPCORK_ALLFRAG;
		cork->length = 0;
		sk->sk_sndmsg_page = NULL;
		sk->sk_sndmsg_off = 0;
		exthdrlen = (opt ? opt->opt_flen : 0);
		length += exthdrlen;
		transhdrlen += exthdrlen;
		dst_exthdrlen = rt->dst.header_len - rt->rt6i_nfheader_len;
	} else {
		rt = (struct rt6_info *)cork->dst;
		fl6 = &inet->cork.fl.u.ip6;
		opt = np->cork.opt;
		transhdrlen = 0;
		exthdrlen = 0;
		dst_exthdrlen = 0;
		mtu = cork->fragsize;
	}
	orig_mtu = mtu;

	hh_len = LL_RESERVED_SPACE(rt->dst.dev);

	fragheaderlen = sizeof(struct ipv6hdr) + rt->rt6i_nfheader_len +
//.........这里部分代码省略.........
开发者ID:pierce1234,项目名称:rt-n56u,代码行数:101,代码来源:ip6_output.c


示例3: vRunCommand


//.........这里部分代码省略.........

		} else if (pMgmt->eCurrState < WMAC_STATE_ASSOCPENDING) {
			printk("WLAN_ASSOCIATE_WAIT:Association Fail???\n");
		} else if (pDevice->byLinkWaitCount <= 4) {
			//mike add:wait another 2 sec if associated_frame delay!
			pDevice->byLinkWaitCount++;
			printk("WLAN_ASSOCIATE_WAIT:wait %d times!!\n", pDevice->byLinkWaitCount);
			spin_unlock_irq(&pDevice->lock);
			vCommandTimerWait((void *) pDevice, ASSOCIATE_TIMEOUT/2);
			return;
		}

		s_bCommandComplete(pDevice);
		break;

	case WLAN_CMD_AP_MODE_START:
		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState == WLAN_CMD_AP_MODE_START\n");

		if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
			cancel_delayed_work_sync(&pDevice->second_callback_work);
			pMgmt->eCurrState = WMAC_STATE_IDLE;
			pMgmt->eCurrMode = WMAC_MODE_STANDBY;
			pDevice->bLinkPass = false;
			ControlvMaskByte(pDevice, MESSAGE_REQUEST_MACREG, MAC_REG_PAPEDELAY, LEDSTS_STS, LEDSTS_SLOW);
			if (pDevice->bEnableHostWEP == true)
				BSSvClearNodeDBTable(pDevice, 1);
			else
				BSSvClearNodeDBTable(pDevice, 0);
			pDevice->uAssocCount = 0;
			pMgmt->eCurrState = WMAC_STATE_IDLE;
			pDevice->bFixRate = false;

			vMgrCreateOwnIBSS((void *) pDevice, &Status);
			if (Status != CMD_STATUS_SUCCESS) {
				DBG_PRT(MSG_LEVEL_DEBUG,
					KERN_INFO "vMgrCreateOwnIBSS fail!\n");
			}
			// always turn off unicast bit
			MACvRegBitsOff(pDevice, MAC_REG_RCR, RCR_UNICAST);
			pDevice->byRxMode &= ~RCR_UNICAST;
			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wcmd: rx_mode = %x\n", pDevice->byRxMode);
			BSSvAddMulticastNode(pDevice);
			if (netif_queue_stopped(pDevice->dev))
				netif_wake_queue(pDevice->dev);
			pDevice->bLinkPass = true;
			ControlvMaskByte(pDevice, MESSAGE_REQUEST_MACREG, MAC_REG_PAPEDELAY, LEDSTS_STS, LEDSTS_INTER);
			schedule_delayed_work(&pDevice->second_callback_work, HZ);
		}
		s_bCommandComplete(pDevice);
		break;

	case WLAN_CMD_TX_PSPACKET_START:
		// DTIM Multicast tx
		if (pMgmt->sNodeDBTable[0].bRxPSPoll) {
			while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[0].sTxPSQueue)) != NULL) {
				if (skb_queue_empty(&pMgmt->sNodeDBTable[0].sTxPSQueue)) {
					pMgmt->abyPSTxMap[0] &= ~byMask[0];
					pDevice->bMoreData = false;
				} else {
					pDevice->bMoreData = true;
				}

				if (nsDMA_tx_packet(pDevice, TYPE_AC0DMA, skb) != 0)
					DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Multicast ps tx fail\n");

				pMgmt->sNodeDBTable[0].wEnQueueCnt--;
			}
		}

		// PS nodes tx
		for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
			if (pMgmt->sNodeDBTable[ii].bActive &&
			    pMgmt->sNodeDBTable[ii].bRxPSPoll) {
				DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Index=%d Enqueu Cnt= %d\n",
						ii, pMgmt->sNodeDBTable[ii].wEnQueueCnt);
				while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) != NULL) {
					if (skb_queue_empty(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) {
						// clear tx map
						pMgmt->abyPSTxMap[pMgmt->sNodeDBTable[ii].wAID >> 3] &=
									~byMask[pMgmt->sNodeDBTable[ii].wAID & 7];
						pDevice->bMoreData = false;
					} else {
						pDevice->bMoreData = true;
					}

					if (nsDMA_tx_packet(pDevice, TYPE_AC0DMA, skb) != 0)
						DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "sta ps tx fail\n");

					pMgmt->sNodeDBTable[ii].wEnQueueCnt--;
					// check if sta ps enable, wait next pspoll
					// if sta ps disable, send all pending buffers.
					if (pMgmt->sNodeDBTable[ii].bPSEnable)
						break;
				}
				if (skb_queue_empty(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) {
					// clear tx map
					pMgmt->abyPSTxMap[pMgmt->sNodeDBTable[ii].wAID >> 3] &=
							~byMask[pMgmt->sNodeDBTable[ii].wAID & 7];
					DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Index=%d PS queue clear\n", ii);
				}
开发者ID:IDM350,项目名称:linux,代码行数:101,代码来源:wcmd.c


示例4: connect

/**
 * connect - establish a connection to another TIPC port
 * @sock: socket structure
 * @dest: socket address for destination port
 * @destlen: size of socket address data structure
 * @flags: file-related flags associated with socket
 *
 * Returns 0 on success, errno otherwise
 */
static int connect(struct socket *sock, struct sockaddr *dest, int destlen,
		   int flags)
{
	struct sock *sk = sock->sk;
	struct sockaddr_tipc *dst = (struct sockaddr_tipc *)dest;
	struct msghdr m = {NULL,};
	struct sk_buff *buf;
	struct tipc_msg *msg;
	unsigned int timeout;
	int res;

	lock_sock(sk);

	/* For now, TIPC does not allow use of connect() with DGRAM/RDM types */
	if (sock->state == SS_READY) {
		res = -EOPNOTSUPP;
		goto exit;
	}

	/* For now, TIPC does not support the non-blocking form of connect() */
	if (flags & O_NONBLOCK) {
		res = -EOPNOTSUPP;
		goto exit;
	}

	/* Issue Posix-compliant error code if socket is in the wrong state */
	if (sock->state == SS_LISTENING) {
		res = -EOPNOTSUPP;
		goto exit;
	}
	if (sock->state == SS_CONNECTING) {
		res = -EALREADY;
		goto exit;
	}
	if (sock->state != SS_UNCONNECTED) {
		res = -EISCONN;
		goto exit;
	}

	/*
	 * Reject connection attempt using multicast address
	 *
	 * Note: send_msg() validates the rest of the address fields,
	 *       so there's no need to do it here
	 */
	if (dst->addrtype == TIPC_ADDR_MCAST) {
		res = -EINVAL;
		goto exit;
	}

	/* Reject any messages already in receive queue (very unlikely) */
	reject_rx_queue(sk);

	/* Send a 'SYN-' to destination */
	m.msg_name = dest;
	m.msg_namelen = destlen;
	res = send_msg(NULL, sock, &m, 0);
	if (res < 0)
		goto exit;

	/* Wait until an 'ACK' or 'RST' arrives, or a timeout occurs */
	timeout = tipc_sk(sk)->conn_timeout;
	release_sock(sk);
	res = wait_event_interruptible_timeout(*sk_sleep(sk),
			(!skb_queue_empty(&sk->sk_receive_queue) ||
			(sock->state != SS_CONNECTING)),
			timeout ? (long)msecs_to_jiffies(timeout)
				: MAX_SCHEDULE_TIMEOUT);
	lock_sock(sk);

	if (res > 0) {
		buf = skb_peek(&sk->sk_receive_queue);
		if (buf != NULL) {
			msg = buf_msg(buf);
			res = auto_connect(sock, msg);
			if (!res) {
				if (!msg_data_sz(msg))
					advance_rx_queue(sk);
			}
		} else {
			if (sock->state == SS_CONNECTED)
				res = -EISCONN;
			else
				res = -ECONNREFUSED;
		}
	} else {
		if (res == 0)
			res = -ETIMEDOUT;
		else
			; /* leave "res" unchanged */
		sock->state = SS_DISCONNECTING;
//.........这里部分代码省略.........
开发者ID:AllenWeb,项目名称:linux,代码行数:101,代码来源:socket.c


示例5: recv_msg

/**
 * recv_msg - receive packet-oriented message
 * @iocb: (unused)
 * @m: descriptor for message info
 * @buf_len: total size of user buffer area
 * @flags: receive flags
 *
 * Used for SOCK_DGRAM, SOCK_RDM, and SOCK_SEQPACKET messages.
 * If the complete message doesn't fit in user area, truncate it.
 *
 * Returns size of returned message data, errno otherwise
 */
static int recv_msg(struct kiocb *iocb, struct socket *sock,
		    struct msghdr *m, size_t buf_len, int flags)
{
	struct sock *sk = sock->sk;
	struct tipc_port *tport = tipc_sk_port(sk);
	struct sk_buff *buf;
	struct tipc_msg *msg;
	long timeout;
	unsigned int sz;
	u32 err;
	int res;

	/* Catch invalid receive requests */
	if (unlikely(!buf_len))
		return -EINVAL;

	lock_sock(sk);

	if (unlikely(sock->state == SS_UNCONNECTED)) {
		res = -ENOTCONN;
		goto exit;
	}

	timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
restart:

	/* Look for a message in receive queue; wait if necessary */
	while (skb_queue_empty(&sk->sk_receive_queue)) {
		if (sock->state == SS_DISCONNECTING) {
			res = -ENOTCONN;
			goto exit;
		}
		if (timeout <= 0L) {
			res = timeout ? timeout : -EWOULDBLOCK;
			goto exit;
		}
		release_sock(sk);
		timeout = wait_event_interruptible_timeout(*sk_sleep(sk),
							   tipc_rx_ready(sock),
							   timeout);
		lock_sock(sk);
	}

	/* Look at first message in receive queue */
	buf = skb_peek(&sk->sk_receive_queue);
	msg = buf_msg(buf);
	sz = msg_data_sz(msg);
	err = msg_errcode(msg);

	/* Complete connection setup for an implied connect */
	if (unlikely(sock->state == SS_CONNECTING)) {
		res = auto_connect(sock, msg);
		if (res)
			goto exit;
	}

	/* Discard an empty non-errored message & try again */
	if ((!sz) && (!err)) {
		advance_rx_queue(sk);
		goto restart;
	}

	/* Capture sender's address (optional) */
	set_orig_addr(m, msg);

	/* Capture ancillary data (optional) */
	res = anc_data_recv(m, msg, tport);
	if (res)
		goto exit;

	/* Capture message data (if valid) & compute return value (always) */
	if (!err) {
		if (unlikely(buf_len < sz)) {
			sz = buf_len;
			m->msg_flags |= MSG_TRUNC;
		}
		res = skb_copy_datagram_iovec(buf, msg_hdr_sz(msg),
					      m->msg_iov, sz);
		if (res)
			goto exit;
		res = sz;
	} else {
		if ((sock->state == SS_READY) ||
		    ((err == TIPC_CONN_SHUTDOWN) || m->msg_control))
			res = 0;
		else
			res = -ECONNRESET;
	}
//.........这里部分代码省略.........
开发者ID:AllenWeb,项目名称:linux,代码行数:101,代码来源:socket.c


示例6: fnic_remove

static void __devexit fnic_remove(struct pci_dev *pdev)
{
	struct fnic *fnic = pci_get_drvdata(pdev);
	struct fc_lport *lp = fnic->lport;
	unsigned long flags;

	/*
	 * Mark state so that the workqueue thread stops forwarding
	 * received frames and link events to the local port. ISR and
	 * other threads that can queue work items will also stop
	 * creating work items on the fnic workqueue
	 */
	spin_lock_irqsave(&fnic->fnic_lock, flags);
	fnic->stop_rx_link_events = 1;
	spin_unlock_irqrestore(&fnic->fnic_lock, flags);

	if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
		del_timer_sync(&fnic->notify_timer);

	/*
	 * Flush the fnic event queue. After this call, there should
	 * be no event queued for this fnic device in the workqueue
	 */
	flush_workqueue(fnic_event_queue);
	skb_queue_purge(&fnic->frame_queue);
	skb_queue_purge(&fnic->tx_queue);

	if (fnic->config.flags & VFCF_FIP_CAPABLE) {
		del_timer_sync(&fnic->fip_timer);
		skb_queue_purge(&fnic->fip_frame_queue);
		fnic_fcoe_reset_vlans(fnic);
		fnic_fcoe_evlist_free(fnic);
	}

	/*
	 * Log off the fabric. This stops all remote ports, dns port,
	 * logs off the fabric. This flushes all rport, disc, lport work
	 * before returning
	 */
	fc_fabric_logoff(fnic->lport);

	spin_lock_irqsave(&fnic->fnic_lock, flags);
	fnic->in_remove = 1;
	spin_unlock_irqrestore(&fnic->fnic_lock, flags);

	fcoe_ctlr_destroy(&fnic->ctlr);
	fc_lport_destroy(lp);
	/*
	 * This stops the fnic device, masks all interrupts. Completed
	 * CQ entries are drained. Posted WQ/RQ/Copy-WQ entries are
	 * cleaned up
	 */
	fnic_cleanup(fnic);

	BUG_ON(!skb_queue_empty(&fnic->frame_queue));
	BUG_ON(!skb_queue_empty(&fnic->tx_queue));

	spin_lock_irqsave(&fnic_list_lock, flags);
	list_del(&fnic->list);
	spin_unlock_irqrestore(&fnic_list_lock, flags);

#if defined(__VMKLNX__)
        vmklnx_iodm_disable_events(fnic->lport->host);
#endif

	fc_remove_host(fnic->lport->host);
	scsi_remove_host(fnic->lport->host);
	fc_exch_mgr_free(fnic->lport);
	vnic_dev_notify_unset(fnic->vdev);
	fnic_free_intr(fnic);
	fnic_free_vnic_resources(fnic);
	fnic_clear_intr_mode(fnic);
	vnic_dev_close(fnic->vdev);
	vnic_dev_unregister(fnic->vdev);
	fnic_iounmap(fnic);
	pci_release_regions(pdev);
	pci_disable_device(pdev);
	pci_set_drvdata(pdev, NULL);
	scsi_host_put(lp->host);
}
开发者ID:pombredanne,项目名称:https-git.sfconservancy.org-vmkdrivers,代码行数:80,代码来源:fnic_main.c


示例7: ip6_append_data

int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb),
		    void *from, int length, int transhdrlen,
		    int hlimit, struct ipv6_txoptions *opt, struct flowi *fl, struct rt6_info *rt,
		    unsigned int flags)
{
	struct inet_sock *inet = inet_sk(sk);
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct sk_buff *skb;
	unsigned int maxfraglen, fragheaderlen;
	int exthdrlen;
	int hh_len;
	int mtu;
	int copy;
	int err;
	int offset = 0;
	int csummode = CHECKSUM_NONE;

	if (flags&MSG_PROBE)
		return 0;
	if (skb_queue_empty(&sk->sk_write_queue)) {
		/*
		 * setup for corking
		 */
		if (opt) {
			if (np->cork.opt == NULL) {
				np->cork.opt = kmalloc(opt->tot_len,
						       sk->sk_allocation);
				if (unlikely(np->cork.opt == NULL))
					return -ENOBUFS;
			} else if (np->cork.opt->tot_len < opt->tot_len) {
				printk(KERN_DEBUG "ip6_append_data: invalid option length\n");
				return -EINVAL;
			}
			memcpy(np->cork.opt, opt, opt->tot_len);
			inet->cork.flags |= IPCORK_OPT;
			/* need source address above miyazawa*/
		}
		dst_hold(&rt->u.dst);
		np->cork.rt = rt;
		inet->cork.fl = *fl;
		np->cork.hop_limit = hlimit;
		inet->cork.fragsize = mtu = dst_mtu(rt->u.dst.path);
		if (dst_allfrag(rt->u.dst.path))
			inet->cork.flags |= IPCORK_ALLFRAG;
		inet->cork.length = 0;
		sk->sk_sndmsg_page = NULL;
		sk->sk_sndmsg_off = 0;
		exthdrlen = rt->u.dst.header_len + (opt ? opt->opt_flen : 0);
		length += exthdrlen;
		transhdrlen += exthdrlen;
	} else {
		rt = np->cork.rt;
		fl = &inet->cork.fl;
		if (inet->cork.flags & IPCORK_OPT)
			opt = np->cork.opt;
		transhdrlen = 0;
		exthdrlen = 0;
		mtu = inet->cork.fragsize;
	}

	hh_len = LL_RESERVED_SPACE(rt->u.dst.dev);

	fragheaderlen = sizeof(struct ipv6hdr) + (opt ? opt->opt_nflen : 0);
	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen - sizeof(struct frag_hdr);

	if (mtu <= sizeof(struct ipv6hdr) + IPV6_MAXPLEN) {
		if (inet->cork.length + length > sizeof(struct ipv6hdr) + IPV6_MAXPLEN - fragheaderlen) {
			ipv6_local_error(sk, EMSGSIZE, fl, mtu-exthdrlen);
			return -EMSGSIZE;
		}
	}

	/*
	 * Let's try using as much space as possible.
	 * Use MTU if total length of the message fits into the MTU.
	 * Otherwise, we need to reserve fragment header and
	 * fragment alignment (= 8-15 octects, in total).
	 *
	 * Note that we may need to "move" the data from the tail of
	 * of the buffer to the new fragment when we split 
	 * the message.
	 *
	 * FIXME: It may be fragmented into multiple chunks 
	 *        at once if non-fragmentable extension headers
	 *        are too large.
	 * --yoshfuji 
	 */

	inet->cork.length += length;

	if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
		goto alloc_new_skb;

	while (length > 0) {
		/* Check if the remaining data fits into current packet. */
		copy = (inet->cork.length <= mtu && !(inet->cork.flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - skb->len;
		if (copy < length)
			copy = maxfraglen - skb->len;

		if (copy <= 0) {
//.........这里部分代码省略.........
开发者ID:kzlin129,项目名称:tt-gpl,代码行数:101,代码来源:ip6_output.c


示例8: ctc_tty_netif_rx

void
ctc_tty_netif_rx(struct sk_buff *skb)
{
	int i;
	ctc_tty_info *info = NULL;

	DBF_TEXT(trace, 5, __FUNCTION__);
	if (!skb)
		return;
	if ((!skb->dev) || (!driver) || ctc_tty_shuttingdown) {
		dev_kfree_skb(skb);
		return;
	}
	for (i = 0; i < CTC_TTY_MAX_DEVICES; i++)
		if (driver->info[i].netdev == skb->dev) {
			info = &driver->info[i];
			break;
		}
	if (!info) {
		dev_kfree_skb(skb);
		return;
	}
	if (skb->len < 6) {
		dev_kfree_skb(skb);
		return;
	}
	if (memcmp(skb->data, &ctc_tty_magic, sizeof(__u32))) {
		dev_kfree_skb(skb);
		return;
	}
	skb_pull(skb, sizeof(__u32));

	i = *((int *)skb->data);
	skb_pull(skb, sizeof(info->mcr));
	if (i & UART_MCR_RTS) {
		info->msr |= UART_MSR_CTS;
		if (info->flags & CTC_ASYNC_CTS_FLOW)
			info->tty->hw_stopped = 0;
	} else {
		info->msr &= ~UART_MSR_CTS;
		if (info->flags & CTC_ASYNC_CTS_FLOW)
			info->tty->hw_stopped = 1;
	}
	if (i & UART_MCR_DTR)
		info->msr |= UART_MSR_DSR;
	else
		info->msr &= ~UART_MSR_DSR;
	if (skb->len <= 0) {
		kfree_skb(skb);
		return;
	}
	/* Try to deliver directly via tty-flip-buf if queue is empty */
	if (skb_queue_empty(&info->rx_queue))
		if (ctc_tty_try_read(info, skb))
			return;
	/* Direct deliver failed or queue wasn't empty.
	 * Queue up for later dequeueing via timer-irq.
	 */
	skb_queue_tail(&info->rx_queue, skb);
	/* Schedule dequeuing */
	tasklet_schedule(&info->tasklet);
}
开发者ID:FelipeFernandes1988,项目名称:Alice-1121-Modem,代码行数:62,代码来源:ctctty.c


示例9: ctc_tty_tint

static int
ctc_tty_tint(ctc_tty_info * info)
{
	struct sk_buff *skb = skb_dequeue(&info->tx_queue);
	int stopped = (info->tty->hw_stopped || info->tty->stopped);
	int wake = 1;
	int rc;

	DBF_TEXT(trace, 4, __FUNCTION__);
	if (!info->netdev) {
		if (skb)
			kfree_skb(skb);
		return 0;
	}
	if (info->flags & CTC_ASYNC_TX_LINESTAT) {
		int skb_res = info->netdev->hard_header_len +
			sizeof(info->mcr) + sizeof(__u32);
		/* If we must update line status,
		 * create an empty dummy skb and insert it.
		 */
		if (skb)
			skb_queue_head(&info->tx_queue, skb);

		skb = dev_alloc_skb(skb_res);
		if (!skb) {
			printk(KERN_WARNING
			       "ctc_tty: Out of memory in %s%d tint\n",
			       CTC_TTY_NAME, info->line);
			return 1;
		}
		skb_reserve(skb, skb_res);
		stopped = 0;
		wake = 0;
	}
	if (!skb)
		return 0;
	if (stopped) {
		skb_queue_head(&info->tx_queue, skb);
		return 1;
	}
#if 0
	if (skb->len > 0)
		printk(KERN_DEBUG "tint: %d %02x\n", skb->len, *(skb->data));
	else
		printk(KERN_DEBUG "tint: %d STAT\n", skb->len);
#endif
	memcpy(skb_push(skb, sizeof(info->mcr)), &info->mcr, sizeof(info->mcr));
	memcpy(skb_push(skb, sizeof(__u32)), &ctc_tty_magic, sizeof(__u32));
	rc = info->netdev->hard_start_xmit(skb, info->netdev);
	if (rc) {
		skb_pull(skb, sizeof(info->mcr) + sizeof(__u32));
		if (skb->len > 0)
			skb_queue_head(&info->tx_queue, skb);
		else
			kfree_skb(skb);
	} else {
		struct tty_struct *tty = info->tty;

		info->flags &= ~CTC_ASYNC_TX_LINESTAT;
		if (tty) {
			if (wake && (tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
			    tty->ldisc.write_wakeup)
				(tty->ldisc.write_wakeup)(tty);
			wake_up_interruptible(&tty->write_wait);
		}
	}
	return (skb_queue_empty(&info->tx_queue) ? 0 : 1);
}
开发者ID:FelipeFernandes1988,项目名称:Alice-1121-Modem,代码行数:68,代码来源:ctctty.c


示例10: clip_mkip

static int clip_mkip(struct atm_vcc *vcc, int timeout)
{
	struct clip_vcc *clip_vcc;
	struct sk_buff *skb;
	struct sk_buff_head *rq;
	unsigned long flags;

	if (!vcc->push)
		return -EBADFD;
	clip_vcc = kmalloc(sizeof(struct clip_vcc), GFP_KERNEL);
	if (!clip_vcc)
		return -ENOMEM;
	DPRINTK("mkip clip_vcc %p vcc %p\n", clip_vcc, vcc);
	clip_vcc->vcc = vcc;
	vcc->user_back = clip_vcc;
	set_bit(ATM_VF_IS_CLIP, &vcc->flags);
	clip_vcc->entry = NULL;
	clip_vcc->xoff = 0;
	clip_vcc->encap = 1;
	clip_vcc->last_use = jiffies;
	clip_vcc->idle_timeout = timeout * HZ;
	clip_vcc->old_push = vcc->push;
	clip_vcc->old_pop = vcc->pop;
	vcc->push = clip_push;
	vcc->pop = clip_pop;

	rq = &sk_atm(vcc)->sk_receive_queue;

	spin_lock_irqsave(&rq->lock, flags);
	if (skb_queue_empty(rq)) {
		skb = NULL;
	} else {
		/* NULL terminate the list.  */
		rq->prev->next = NULL;
		skb = rq->next;
	}
	rq->prev = rq->next = (struct sk_buff *)rq;
	rq->qlen = 0;
	spin_unlock_irqrestore(&rq->lock, flags);

	/* re-process everything received between connection setup and MKIP */
	while (skb) {
		struct sk_buff *next = skb->next;

		skb->next = skb->prev = NULL;
		if (!clip_devs) {
			atm_return(vcc, skb->truesize);
			kfree_skb(skb);
		} else {
			unsigned int len = skb->len;

			skb_get(skb);
			clip_push(vcc, skb);
			PRIV(skb->dev)->stats.rx_packets--;
			PRIV(skb->dev)->stats.rx_bytes -= len;
			kfree_skb(skb);
		}

		skb = next;
	}
	return 0;
}
开发者ID:qwerty1023,项目名称:wive-rtnl-firmware,代码行数:62,代码来源:clip.c


示例11: fw_download_code

/*
 * segment the img and use the ptr and length to remember info on each segment
 *
 */
static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
			     u32 buffer_len)
{
	struct r8192_priv   *priv = ieee80211_priv(dev);
	bool		    rt_status = true;
	u16		    frag_threshold;
	u16		    frag_length, frag_offset = 0;
	//u16		    total_size;
	int		    i;

	rt_firmware	    *pfirmware = priv->pFirmware;
	struct sk_buff	    *skb;
	unsigned char	    *seg_ptr;
	cb_desc		    *tcb_desc;
	u8                  bLastIniPkt;

	firmware_init_param(dev);
	//Fragmentation might be required
	frag_threshold = pfirmware->cmdpacket_frag_thresold;
	do {
		if ((buffer_len - frag_offset) > frag_threshold) {
			frag_length = frag_threshold;
			bLastIniPkt = 0;

		} else {
			frag_length = buffer_len - frag_offset;
			bLastIniPkt = 1;

		}

		/* Allocate skb buffer to contain firmware info and tx descriptor info
		 * add 4 to avoid packet appending overflow.
		 * */
		skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
		if (!skb)
			return false;
		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
		tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
		tcb_desc->queue_index = TXCMD_QUEUE;
		tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
		tcb_desc->bLastIniPkt = bLastIniPkt;

		skb_reserve(skb, USB_HWDESC_HEADER_LEN);
		seg_ptr = skb->data;
		/*
		 * Transform from little endian to big endian
		 * and pending  zero
		 */
		for (i=0; i < frag_length; i+=4) {
			*seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0;
			*seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0;
			*seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0;
			*seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
		}
		tcb_desc->txbuf_size= (u16)i;
		skb_put(skb, i);

		if (!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
			(priv->ieee80211->queue_stop)) {
			RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
		} else {
			priv->ieee80211->softmac_hard_start_xmit(skb, dev);
		}

		code_virtual_address += frag_length;
		frag_offset += frag_length;

	} while (frag_offset < buffer_len);

	return rt_status;

}
开发者ID:3null,项目名称:linux,代码行数:78,代码来源:r819xU_firmware.c


示例12: yam_tx_byte

static void yam_tx_byte(struct net_device *dev, struct yam_port *yp)
{
	struct sk_buff *skb;
	unsigned char b, temp;

	switch (yp->tx_state) {
	case TX_OFF:
		break;
	case TX_HEAD:
		if (--yp->tx_count <= 0) {
			if (!(skb = skb_dequeue(&yp->send_queue))) {
				ptt_off(dev);
				yp->tx_state = TX_OFF;
				break;
			}
			yp->tx_state = TX_DATA;
			if (skb->data[0] != 0) {
/*                              do_kiss_params(s, skb->data, skb->len); */
				dev_kfree_skb_any(skb);
				break;
			}
			yp->tx_len = skb->len - 1;	/* strip KISS byte */
			if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) {
        			dev_kfree_skb_any(skb);
				break;
			}
			skb_copy_from_linear_data_offset(skb, 1,
							 yp->tx_buf,
							 yp->tx_len);
			dev_kfree_skb_any(skb);
			yp->tx_count = 0;
			yp->tx_crcl = 0x21;
			yp->tx_crch = 0xf3;
			yp->tx_state = TX_DATA;
		}
		break;
	case TX_DATA:
		b = yp->tx_buf[yp->tx_count++];
		outb(b, THR(dev->base_addr));
		temp = yp->tx_crcl;
		yp->tx_crcl = chktabl[temp] ^ yp->tx_crch;
		yp->tx_crch = chktabh[temp] ^ b;
		if (yp->tx_count >= yp->tx_len) {
			yp->tx_state = TX_CRC1;
		}
		break;
	case TX_CRC1:
		yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch;
		yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff;
		outb(yp->tx_crcl, THR(dev->base_addr));
		yp->tx_state = TX_CRC2;
		break;
	case TX_CRC2:
		outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr));
		if (skb_queue_empty(&yp->send_queue)) {
			yp->tx_count = (yp->bitrate * yp->txtail) / 8000;
			if (yp->dupmode == 2)
				yp->tx_count += (yp->bitrate * yp->holdd) / 8;
			if (yp->tx_count == 0)
				yp->tx_count = 1;
			yp->tx_state = TX_TAIL;
		} else {
			yp->tx_count = 1;
			yp->tx_state = TX_HEAD;
		}
		++dev->stats.tx_packets;
		break;
	case TX_TAIL:
		if (--yp->tx_count <= 0) {
			yp->tx_state = TX_OFF;
			ptt_off(dev);
		}
		break;
	}
}
开发者ID:3sOx,项目名称:asuswrt-merlin,代码行数:75,代码来源:yam.c


示例13: btmrvl_service_main_thread

/*
 * This function handles the event generated by firmware, rx data
 * received from firmware, and tx data sent from kernel.
 */
static int btmrvl_service_main_thread(void *data)
{
	struct btmrvl_thread *thread = data;
	struct btmrvl_private *priv = thread->priv;
	struct btmrvl_adapter *adapter = priv->adapter;
	wait_queue_t wait;
	struct sk_buff *skb;
	ulong flags;

	init_waitqueue_entry(&wait, current);

	for (;;) {
		add_wait_queue(&thread->wait_q, &wait);

		set_current_state(TASK_INTERRUPTIBLE);
		if (kthread_should_stop()) {
			BT_DBG("main_thread: break from main thread");
			break;
		}

		if (adapter->wakeup_tries ||
				((!adapter->int_count) &&
				(!priv->btmrvl_dev.tx_dnld_rdy ||
				skb_queue_empty(&adapter->tx_queue)))) {
			BT_DBG("main_thread is sleeping...");
			schedule();
		}

		set_current_state(TASK_RUNNING);

		remove_wait_queue(&thread->wait_q, &wait);

		BT_DBG("main_thread woke up");

		spin_lock_irqsave(&priv->driver_lock, flags);
		if (adapter->int_count) {
			adapter->int_count = 0;
			spin_unlock_irqrestore(&priv->driver_lock, flags);
			priv->hw_process_int_status(priv);
		} else if (adapter->ps_state == PS_SLEEP &&
					!skb_queue_empty(&adapter->tx_queue)) {
			spin_unlock_irqrestore(&priv->driver_lock, flags);
			adapter->wakeup_tries++;
			priv->hw_wakeup_firmware(priv);
			continue;
		} else {
			spin_unlock_irqrestore(&priv->driver_lock, flags);
		}

		if (adapter->ps_state == PS_SLEEP)
			continue;

		if (!priv->btmrvl_dev.tx_dnld_rdy)
			continue;

		skb = skb_dequeue(&adapter->tx_queue);
		if (skb) {
			if (btmrvl_tx_pkt(priv, skb))
				priv->btmrvl_dev.hcidev->stat.err_tx++;
			else
				priv->btmrvl_dev.hcidev->stat.byte_tx += skb->len;

			kfree_skb(skb);
		}
	}

	return 0;
}
开发者ID:03199618,项目名称:linux,代码行数:72,代码来源:btmrvl_main.c


示例14: vRunCommand


//.........这里部分代码省略.........
	       printk("WLAN_ASSOCIATE_WAIT:wait %d times!!\n",pDevice->byLinkWaitCount);
	       spin_unlock_irq(&pDevice->lock);
	       vCommandTimerWait((void *) pDevice, ASSOCIATE_TIMEOUT/2);
	       return;
	   }
	          pDevice->byLinkWaitCount = 0;

            s_bCommandComplete(pDevice);
            break;

        case WLAN_CMD_AP_MODE_START :
            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState == WLAN_CMD_AP_MODE_START\n");

            if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
                del_timer(&pMgmt->sTimerSecondCallback);
                pMgmt->eCurrState = WMAC_STATE_IDLE;
                pMgmt->eCurrMode = WMAC_MODE_STANDBY;
                pDevice->bLinkPass = FALSE;
                ControlvMaskByte(pDevice,MESSAGE_REQUEST_MACREG,MAC_REG_PAPEDELAY,LEDSTS_STS,LEDSTS_SLOW);
                if (pDevice->bEnableHostWEP == TRUE)
                    BSSvClearNodeDBTable(pDevice, 1);
                else
                    BSSvClearNodeDBTable(pDevice, 0);
                pDevice->uAssocCount = 0;
                pMgmt->eCurrState = WMAC_STATE_IDLE;
                pDevice->bFixRate = FALSE;

		vMgrCreateOwnIBSS((void *) pDevice, &Status);
		if (Status != CMD_STATUS_SUCCESS) {
			DBG_PRT(MSG_LEVEL_DEBUG,
				KERN_INFO "vMgrCreateOwnIBSS fail!\n");
                }
                
                MACvRegBitsOff(pDevice, MAC_REG_RCR, RCR_UNICAST);
                pDevice->byRxMode &= ~RCR_UNICAST;
                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wcmd: rx_mode = %x\n", pDevice->byRxMode );
                BSSvAddMulticastNode(pDevice);
                if (netif_queue_stopped(pDevice->dev)){
                    netif_wake_queue(pDevice->dev);
                }
                pDevice->bLinkPass = TRUE;
                ControlvMaskByte(pDevice,MESSAGE_REQUEST_MACREG,MAC_REG_PAPEDELAY,LEDSTS_STS,LEDSTS_INTER);
                add_timer(&pMgmt->sTimerSecondCallback);
            }
            s_bCommandComplete(pDevice);
            break;

        case WLAN_CMD_TX_PSPACKET_START :
            
            if (pMgmt->sNodeDBTable[0].bRxPSPoll) {
                while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[0].sTxPSQueue)) != NULL) {
                    if (skb_queue_empty(&pMgmt->sNodeDBTable[0].sTxPSQueue)) {
                        pMgmt->abyPSTxMap[0] &= ~byMask[0];
                        pDevice->bMoreData = FALSE;
                    }
                    else {
                        pDevice->bMoreData = TRUE;
                    }

                    if (nsDMA_tx_packet(pDevice, TYPE_AC0DMA, skb) != 0) {
                        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Multicast ps tx fail \n");
                    }

                    pMgmt->sNodeDBTable[0].wEnQueueCnt--;
                }
            }

            
            for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
                if (pMgmt->sNodeDBTable[ii].bActive &&
                    pMgmt->sNodeDBTable[ii].bRxPSPoll) {
                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Index=%d Enqueu Cnt= %d\n",
                               ii, pMgmt->sNodeDBTable[ii].wEnQueueCnt);
                    while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) != NULL) {
                        if (skb_queue_empty(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) {
                            
                            pMgmt->abyPSTxMap[pMgmt->sNodeDBTable[ii].wAID >> 3] &=
                                    ~byMask[pMgmt->sNodeDBTable[ii].wAID & 7];
                            pDevice->bMoreData = FALSE;
                        }
                        else {
                            pDevice->bMoreData = TRUE;
                        }

                        if (nsDMA_tx_packet(pDevice, TYPE_AC0DMA, skb) != 0) {
                            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "sta ps tx fail \n");
                        }

                        pMgmt->sNodeDBTable[ii].wEnQueueCnt--;
                        
                        
                        if (pMgmt->sNodeDBTable[ii].bPSEnable)
                            break;
                    }
                    if (skb_queue_empty(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) {
                        
                        pMgmt->abyPSTxMap[pMgmt->sNodeDBTable[ii].wAID >> 3] &=
                                    ~byMask[pMgmt->sNodeDBTable[ii].wAID & 7];
                        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Index=%d PS queue clear \n", ii);
                    }
开发者ID:DirtyDroidX,项目名称:android_kernel_htc_m8ul,代码行数:101,代码来源:wcmd.c


示例15: xfrm_offload

struct sk_buff *validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t features, bool *again)
{
	int err;
	unsigned long flags;
	struct xfrm_state *x;
	struct sk_buff *skb2;
	struct softnet_data *sd;
	netdev_features_t esp_features = features;
	struct xfrm_offload *xo = xfrm_offload(skb);

	if (!xo)
		return skb;

	if (!(features & NETIF_F_HW_ESP))
		esp_features = features & ~(NETIF_F_SG | NETIF_F_CSUM_MASK);

	x = skb->sp->xvec[skb->sp->len - 1];
	if (xo->flags & XFRM_GRO || x->xso.flags & XFRM_OFFLOAD_INBOUND)
		return skb;

	local_irq_save(flags);
	sd = this_cpu_ptr(&softnet_data);
	err = !skb_queue_empty(&sd->xfrm_backlog);
	local_irq_restore(flags);

	if (err) {
		*again = true;
		return skb;
	}

	if (skb_is_gso(skb)) {
		struct net_device *dev = skb->dev;

		if (unlikely(!x->xso.offload_handle || (x->xso.dev != dev))) {
			struct sk_buff *segs;

			/* Packet got rerouted, fixup features and segment it. */
			esp_features = esp_features & ~(NETIF_F_HW_ESP
							| NETIF_F_GSO_ESP);

			segs = skb_gso_segment(skb, esp_features);
			if (IS_ERR(segs)) {
				kfree_skb(skb);
				atomic_long_inc(&dev->tx_dropped);
				return NULL;
			} else {
				consume_skb(skb);
				skb = segs;
			}
		}
	}

	if (!skb->next) {
		x->outer_mode->xmit(x, skb);

		xo->flags |= XFRM_DEV_RESUME;

		err = x->type_offload->xmit(x, skb, esp_features);
		if (err) {
			if (err == -EINPROGRESS)
				return NULL;

			XFRM_INC_STATS(xs_net(x), LINUX_MIB_XFRMOUTSTATEPROTOERROR);
			kfree_skb(skb);
			return NULL;
		}

		skb_push(skb, skb->data - skb_mac_header(skb));

		return skb;
	}

	skb2 = skb;

	do {
		struct sk_buff *nskb = skb2->next;
		skb2->next = NULL;

		xo = xfrm_offload(skb2);
		xo->flags |= XFRM_DEV_RESUME;

		x->outer_mode->xmit(x, skb2);

		err = x->type_offload->xmit(x, skb2, esp_features);
		if (!err) {
			skb2->next = nskb;
		} else if (err != -EINPROGRESS) {
			XFRM_INC_STATS(xs_net(x), LINUX_MIB_XFRMOUTSTATEPROTOERROR);
			skb2->next = nskb;
			kfree_skb_list(skb2);
			return NULL;
		} else {
			if (skb == skb2)
				skb = nskb;

			if (!skb)
				return NULL;

			goto skip_push;
		}
//.........这里部分代码省略.........
开发者ID:krzk,项目名称:linux,代码行数:101,代码来源:xfrm_device.c


示例16: iwm_tx_worker

void iwm_tx_worker(struct work_struct *work)
{
	struct iwm_priv *iwm;
	struct iwm_tx_info *tx_info = NULL;
	struct sk_buff *skb;
	struct iwm_tx_queue *txq;
	struct iwm_sta_info *sta_info;
	struct iwm_tid_info *tid_info;
	int cmdlen, ret, pool_id;

	txq = container_of(work, struct iwm_tx_queue, worker);
	iwm = container_of(txq, struct iwm_priv, txq[txq->id]);

	pool_id = queue_to_pool_id(txq->id);

	while (!test_bit(pool_id, &iwm->tx_credit.full_pools_map) &&
	       !skb_queue_empty(&txq->queue)) {

		spin_lock_bh(&txq->lock);
		skb = skb_dequeue(&txq->queue);
		spin_unlock_bh(&txq->lock);

		tx_info = skb_to_tx_info(skb);
		sta_info = &iwm->sta_table[tx_info->sta];
		if (!sta_info->valid) {
			IWM_ERR(iwm, "Trying to send a frame to unknown STA\n");
			kfree_skb(skb);
			continue;
		}

		tid_info = &sta_info->tid_info[tx_info->tid];

		mutex_lock(&tid_info->mutex);

		/*
		 * If the RAxTID is stopped, we queue the skb to the stopped
		 * queue.
		 * Whenever we'll get a UMAC notification to resume the tx flow
		 * for this RAxTID, we'll merge back the stopped queue into the
		 * regular queue. See iwm_ntf_stop_resume_tx() from rx.c.
		 */
		if (tid_info->stopped) {
			IWM_DBG_TX(iwm, DBG, "%dx%d stopped\n",
				   tx_info->sta, tx_info->tid);
			spin_lock_bh(&txq->lock);
			skb_queue_tail(&txq->stopped_queue, skb);
			spin_unlock_bh(&txq->lock);

			mutex_unlock(&tid_info->mutex);
			continue;
		}

		cmdlen = IWM_UDMA_HDR_LEN + skb->len;

		IWM_DBG_TX(iwm, DBG, "Tx frame on queue %d: skb: 0x%p, sta: "
			   "%d, color: %d\n", txq->id, skb, tx_info->sta,
			   tx_info->color);

		if (txq->concat_count + cmdlen > IWM_HAL_CONCATENATE_BUF_SIZE)
			iwm_tx_send_concat_packets(iwm, txq);

		ret = iwm_tx_credit_alloc(iwm, pool_id, cmdlen);
		if (ret) {
			IWM_DBG_TX(iwm, DBG, "not enough tx_credit for queue "
				   "%d, Tx worker stopped\n", txq->id);
			spin_lock_bh(&txq->lock);
			skb_queue_head(&txq->queue, skb);
			spin_unlock_bh(&txq->lock);

			mutex_unlock(&tid_info->mutex);
			break;
		}

		txq->concat_ptr = txq->concat_buf + txq->concat_count;
		tid_info->last_seq_num =
			iwm_tx_build_packet(iwm, skb, pool_id, txq->concat_ptr);
		txq->concat_count += ALIGN(cmdlen, 16);

		mutex_unlock(&tid_info->mutex);

		kfree_skb(skb);
	}

	iwm_tx_send_concat_packets(iwm, txq);

	if (__netif_subqueue_stopped(iwm_to_ndev(iwm), txq->id) &&
	    !test_bit(pool_id, &iwm->tx_credit.full_pools_map) &&
	    (skb_queue_len(&txq->queue) < IWM_TX_LIST_SIZE / 2)) {
		IWM_DBG_TX(iwm, DBG, "LINK: start netif_subqueue[%d]", txq->id);
		netif_wake_subqueue(iwm_to_ndev(iwm), txq->id);
	}
}
开发

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ skb_queue_purge函数代码示例发布时间:2022-05-30
下一篇:
C++ skb_put函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap