C++ skb_network_header_len函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中skb_network_header_len函数的典型用法代码示例。如果您正苦于以下问题：C++ skb_network_header_len函数的具体用法？C++ skb_network_header_len怎么用？C++ skb_network_header_len使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了skb_network_header_len函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ipv6_frag_rcv

static int ipv6_frag_rcv(struct sk_buff *skb)
{
	struct frag_hdr *fhdr;
	struct frag_queue *fq;
	struct ipv6hdr *hdr = ipv6_hdr(skb);
	struct net *net;

	IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMREQDS);

	/* Jumbo payload inhibits frag. header */
	if (hdr->payload_len==0) {
		IP6_INC_STATS(ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
				  skb_network_header_len(skb));
		return -1;
	}
	if (!pskb_may_pull(skb, (skb_transport_offset(skb) +
				 sizeof(struct frag_hdr)))) {
		IP6_INC_STATS(ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
				  skb_network_header_len(skb));
		return -1;
	}

	hdr = ipv6_hdr(skb);
	fhdr = (struct frag_hdr *)skb_transport_header(skb);

	if (!(fhdr->frag_off & htons(0xFFF9))) {
		/* It is not a fragmented frame */
		skb->transport_header += sizeof(struct frag_hdr);
		IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMOKS);

		IP6CB(skb)->nhoff = (u8 *)fhdr - skb_network_header(skb);
		return 1;
	}

	net = dev_net(skb->dev);
	if (atomic_read(&net->ipv6.frags.mem) > net->ipv6.frags.high_thresh)
		ip6_evictor(net, ip6_dst_idev(skb->dst));

	if ((fq = fq_find(net, fhdr->identification, &hdr->saddr, &hdr->daddr,
			  ip6_dst_idev(skb->dst))) != NULL) {
		int ret;

		spin_lock(&fq->q.lock);

		ret = ip6_frag_queue(fq, skb, fhdr, IP6CB(skb)->nhoff);

		spin_unlock(&fq->q.lock);
		fq_put(fq);
		return ret;
	}

	IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMFAILS);
	kfree_skb(skb);
	return -1;
}

开发者ID:khenam，项目名称:ardrone-kernel，代码行数:57，代码来源:reassembly.c

示例2: ip_local_deliver_finish

static int ip_local_deliver_finish(struct sk_buff *skb)
{
	struct net *net = dev_net(skb->dev);

	__skb_pull(skb, skb_network_header_len(skb));

	rcu_read_lock();
	{
		int protocol = ip_hdr(skb)->protocol;
		const struct net_protocol *ipprot;
		int raw;

	resubmit:
		raw = raw_local_deliver(skb, protocol);

		ipprot = rcu_dereference(inet_protos[protocol]);
		if (ipprot != NULL) {
			int ret;

			if (!ipprot->no_policy) {
				if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
					kfree_skb(skb);
					goto out;
				}
				nf_reset(skb);
			}
			ret = ipprot->handler(skb);
			if (ret < 0) {
				protocol = -ret;
				goto resubmit;
			}
			IP_INC_STATS_BH(net, IPSTATS_MIB_INDELIVERS);
		} else {
			if (!raw) {
				if (xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
					IP_INC_STATS_BH(net, IPSTATS_MIB_INUNKNOWNPROTOS);
					icmp_send(skb, ICMP_DEST_UNREACH,
						  ICMP_PROT_UNREACH, 0);
				}
				kfree_skb(skb);
			} else {
				IP_INC_STATS_BH(net, IPSTATS_MIB_INDELIVERS);
				consume_skb(skb);
			}
		}
	}
 out:
	rcu_read_unlock();

	return 0;
}

开发者ID:Lanyaaki，项目名称:ipaugenblick，代码行数:51，代码来源:ip_input.c

示例3: tarpit_tg6

static unsigned int
tarpit_tg6(struct sk_buff *skb, const struct xt_action_param *par)
{
	const struct ipv6hdr *iph = ipv6_hdr(skb);
	const struct rt6_info *rt = (struct rt6_info *)skb_dst(skb);
	const struct xt_tarpit_tginfo *info = par->targinfo;
	uint8_t proto;
	__be16 frag_off;

	/* Do we have an input route cache entry? (Not in PREROUTING.) */
	if (rt == NULL) {
		pr_debug("Dropping no input route cache entry\n");
		return NF_DROP;
	}

	/* No replies to physical multicast/broadcast */
	/* skb != PACKET_OTHERHOST handled by ip_rcv() */
	if (skb->pkt_type != PACKET_HOST) {
		pr_debug("type != PACKET_HOST");
		return NF_DROP;
	}

	/*
	 * Our naive response construction does not deal with IP
	 * options, and probably should not try.
	 */
	proto = iph->nexthdr;
	if (ipv6_skip_exthdr(skb, skb_network_header_len(skb), &proto,
	    &frag_off) != sizeof(struct ipv6hdr))
		return NF_DROP;

	if ((!(ipv6_addr_type(&iph->saddr) & IPV6_ADDR_UNICAST)) ||
	    (!(ipv6_addr_type(&iph->daddr) & IPV6_ADDR_UNICAST))) {
		pr_debug("addr is not unicast.\n");
		return NF_DROP;
	}
	tarpit_tcp6(par_net(par), skb, par->state->hook, info->variant);
	return NF_DROP;
}

开发者ID:nawawi，项目名称:xtables-addons，代码行数:39，代码来源:xt_TARPIT.c

示例4: ip6_frag_reasm


//.........这里部分代码省略.........
		skb_morph(head, fq->q.fragments);
		head->next = fq->q.fragments->next;

		kfree_skb(fq->q.fragments);
		fq->q.fragments = head;
	}

	WARN_ON(head == NULL);
	WARN_ON(FRAG6_CB(head)->offset != 0);

	/* Unfragmented part is taken from the first segment. */
	payload_len = ((head->data - skb_network_header(head)) -
		       sizeof(struct ipv6hdr) + fq->q.len -
		       sizeof(struct frag_hdr));
	if (payload_len > IPV6_MAXPLEN)
		goto out_oversize;

	/* Head of list must not be cloned. */
	if (skb_cloned(head) && pskb_expand_head(head, 0, 0, GFP_ATOMIC))
		goto out_oom;

	/* If the first fragment is fragmented itself, we split
	 * it to two chunks: the first with data and paged part
	 * and the second, holding only fragments. */
	if (skb_has_frag_list(head)) {
		struct sk_buff *clone;
		int i, plen = 0;

		if ((clone = alloc_skb(0, GFP_ATOMIC)) == NULL)
			goto out_oom;
		clone->next = head->next;
		head->next = clone;
		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
		skb_frag_list_init(head);
		for (i=0; i<skb_shinfo(head)->nr_frags; i++)
			plen += skb_shinfo(head)->frags[i].size;
		clone->len = clone->data_len = head->data_len - plen;
		head->data_len -= clone->len;
		head->len -= clone->len;
		clone->csum = 0;
		clone->ip_summed = head->ip_summed;
		atomic_add(clone->truesize, &fq->q.net->mem);
	}

	/* We have to remove fragment header from datagram and to relocate
	 * header in order to calculate ICV correctly. */
	nhoff = fq->nhoffset;
	skb_network_header(head)[nhoff] = skb_transport_header(head)[0];
	memmove(head->head + sizeof(struct frag_hdr), head->head,
		(head->data - head->head) - sizeof(struct frag_hdr));
	head->mac_header += sizeof(struct frag_hdr);
	head->network_header += sizeof(struct frag_hdr);

	skb_shinfo(head)->frag_list = head->next;
	skb_reset_transport_header(head);
	skb_push(head, head->data - skb_network_header(head));

	for (fp=head->next; fp; fp = fp->next) {
		head->data_len += fp->len;
		head->len += fp->len;
		if (head->ip_summed != fp->ip_summed)
			head->ip_summed = CHECKSUM_NONE;
		else if (head->ip_summed == CHECKSUM_COMPLETE)
			head->csum = csum_add(head->csum, fp->csum);
		head->truesize += fp->truesize;
	}
	atomic_sub(head->truesize, &fq->q.net->mem);

	head->next = NULL;
	head->dev = dev;
	head->tstamp = fq->q.stamp;
	ipv6_hdr(head)->payload_len = htons(payload_len);
	IP6CB(head)->nhoff = nhoff;

	/* Yes, and fold redundant checksum back. 8) */
	if (head->ip_summed == CHECKSUM_COMPLETE)
		head->csum = csum_partial(skb_network_header(head),
					  skb_network_header_len(head),
					  head->csum);

	rcu_read_lock();
	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
	rcu_read_unlock();
	fq->q.fragments = NULL;
	fq->q.fragments_tail = NULL;
	return 1;

out_oversize:
	if (net_ratelimit())
		printk(KERN_DEBUG "ip6_frag_reasm: payload len = %d\n", payload_len);
	goto out_fail;
out_oom:
	if (net_ratelimit())
		printk(KERN_DEBUG "ip6_frag_reasm: no memory for reassembly\n");
out_fail:
	rcu_read_lock();
	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
	rcu_read_unlock();
	return -1;
}

开发者ID:Adjustxx，项目名称:Savaged-Zen，代码行数:101，代码来源:reassembly.c

示例5: tcp_connect

int tcp_connect(struct socket *sock)
{
	struct sockaddr_in address = {
		.sin_family = AF_INET,
		.sin_port = htons(2222),
		.sin_addr.s_addr = INADDR_LOOPBACK
	};
	// struct proto_ops inet_stream_ops.connect -> inet_stream_connect
	int err = sock->ops->connect(sock, (struct sockaddr *)&address, sizeof address, 0);
				     //sock->file->f_flags);
	return err;
}

int tcp_bind(struct socket *sock)
{
	struct sockaddr_in address = {
		.sin_family = AF_INET,
		.sin_port = htons(2222),
		.sin_addr.s_addr = INADDR_ANY
	};
	// struct proto_ops inet_stream_ops.bind -> inet_bind
	int err = sock->ops->bind(sock, (struct sockaddr *)&address, sizeof address);
	return err;
}

int tcp_listen(struct socket *sock, int backlog)
{
	int err = sock->ops->listen(sock, backlog);
	return err;
}

struct net_device g_dev = {
  // .nd_net = { &init_net }
};

// include/net/route.h
// struct rtable {
//	struct dst_entry	dst;
//	...

struct rtable g_rt = {
	.rt_iif = 123,
	.rt_type = RTN_LOCAL
};

struct sk_buff *build_skbuff(const void* ippacket, unsigned int len)
{
	struct sk_buff* skb = alloc_skb(len, GFP_ATOMIC);
	if (skb) {
		skb_put(skb, len);
		skb_copy_to_linear_data(skb, ippacket, len);
		skb_reset_mac_header(skb);
		skb_reset_network_header(skb);
		// skb_set_transport_header(skb, 20);
		// iph = ip_hdr(skb);
		skb->transport_header = skb->network_header + 20; // iph->ihl*4;
		__skb_pull(skb, skb_network_header_len(skb));
		skb->protocol = htons(ETH_P_IP);
		// g_rt.dst.dev = &g_dev;
		skb_dst_set(skb, &g_rt.dst);
	}
	return skb;
}

开发者ID:kanjie128，项目名称:linux-study，代码行数:63，代码来源:helper.c

示例6: ip6_input_icmp_cheat

/* <DTS2012022805249  g00206962 2012/2/27 add begin */
static inline int ip6_input_icmp_cheat(struct sk_buff *skb)
{
	struct inet6_protocol *ipprot;
	unsigned int nhoff;
	int nexthdr, raw;
	u8 hash;
	struct inet6_dev *idev;
	struct net *net = dev_net(skb->dst->dev);

	/*
	 *	Parse extension headers
	 */

	rcu_read_lock();
resubmit:
	idev = ip6_dst_idev(skb->dst);
	if (!pskb_pull(skb, skb_transport_offset(skb)))
		goto discard;
	nhoff = IP6CB(skb)->nhoff;
	nexthdr = skb_network_header(skb)[nhoff];

	raw = raw6_local_deliver(skb, nexthdr);

	hash = nexthdr & (MAX_INET_PROTOS - 1);
	if ((ipprot = rcu_dereference(inet6_protos[hash])) != NULL) {
		int ret;

		if (ipprot->flags & INET6_PROTO_FINAL) {
			struct ipv6hdr *hdr;

			/* Free reference early: we don't need it any more,
			   and it may hold ip_conntrack module loaded
			   indefinitely. */
			nf_reset(skb);

			skb_postpull_rcsum(skb, skb_network_header(skb),
					   skb_network_header_len(skb));
			hdr = ipv6_hdr(skb);
            /*
			if (ipv6_addr_is_multicast(&hdr->daddr) &&
			    !ipv6_chk_mcast_addr(skb->dev, &hdr->daddr,
			    &hdr->saddr) &&
			    !ipv6_is_mld(skb, nexthdr))
				goto discard;
			*/
			if (ipv6_addr_is_multicast(&hdr->daddr) && IPPROTO_ICMPV6 != nexthdr)
				goto discard;
			else if (!ipv6_addr_is_multicast(&hdr->daddr))
				goto discard;
		}
		if (!(ipprot->flags & INET6_PROTO_NOPOLICY) &&
		    !xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
			goto discard;

		ret = ipprot->handler(skb);
		if (ret > 0)
			goto resubmit;
		else if (ret == 0)
			IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDELIVERS);
	} else {
		if (!raw) {
			if (xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
				IP6_INC_STATS_BH(net, idev,
						 IPSTATS_MIB_INUNKNOWNPROTOS);
				icmpv6_send(skb, ICMPV6_PARAMPROB,
					    ICMPV6_UNK_NEXTHDR, nhoff,
					    skb->dev);
			}
		} else
			IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDELIVERS);
		kfree_skb(skb);
	}
	rcu_read_unlock();
	return 0;

discard:
	IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDISCARDS);
	rcu_read_unlock();
	kfree_skb(skb);
	return 0;
}

开发者ID:fr34k8，项目名称:DT_Hybrid_GPL_1.00.053，代码行数:82，代码来源:ip6_input.c

示例7: ip6_frag_reasm

/*
 *	Check if this packet is complete.
 *
 *	It is called with locked fq, and caller must check that
 *	queue is eligible for reassembly i.e. it is not COMPLETE,
 *	the last and the first frames arrived and all the bits are here.
 */
static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *skb,
			  struct sk_buff *prev_tail, struct net_device *dev)
{
	struct net *net = container_of(fq->q.net, struct net, ipv6.frags);
	unsigned int nhoff;
	void *reasm_data;
	int payload_len;
	u8 ecn;

	inet_frag_kill(&fq->q);

	ecn = ip_frag_ecn_table[fq->ecn];
	if (unlikely(ecn == 0xff))
		goto out_fail;

	reasm_data = inet_frag_reasm_prepare(&fq->q, skb, prev_tail);
	if (!reasm_data)
		goto out_oom;

	payload_len = ((skb->data - skb_network_header(skb)) -
		       sizeof(struct ipv6hdr) + fq->q.len -
		       sizeof(struct frag_hdr));
	if (payload_len > IPV6_MAXPLEN)
		goto out_oversize;

	/* We have to remove fragment header from datagram and to relocate
	 * header in order to calculate ICV correctly. */
	nhoff = fq->nhoffset;
	skb_network_header(skb)[nhoff] = skb_transport_header(skb)[0];
	memmove(skb->head + sizeof(struct frag_hdr), skb->head,
		(skb->data - skb->head) - sizeof(struct frag_hdr));
	if (skb_mac_header_was_set(skb))
		skb->mac_header += sizeof(struct frag_hdr);
	skb->network_header += sizeof(struct frag_hdr);

	skb_reset_transport_header(skb);

	inet_frag_reasm_finish(&fq->q, skb, reasm_data);

	skb->dev = dev;
	ipv6_hdr(skb)->payload_len = htons(payload_len);
	ipv6_change_dsfield(ipv6_hdr(skb), 0xff, ecn);
	IP6CB(skb)->nhoff = nhoff;
	IP6CB(skb)->flags |= IP6SKB_FRAGMENTED;
	IP6CB(skb)->frag_max_size = fq->q.max_size;

	/* Yes, and fold redundant checksum back. 8) */
	skb_postpush_rcsum(skb, skb_network_header(skb),
			   skb_network_header_len(skb));

	rcu_read_lock();
	__IP6_INC_STATS(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
	rcu_read_unlock();
	fq->q.rb_fragments = RB_ROOT;
	fq->q.fragments_tail = NULL;
	fq->q.last_run_head = NULL;
	return 1;

out_oversize:
	net_dbg_ratelimited("ip6_frag_reasm: payload len = %d\n", payload_len);
	goto out_fail;
out_oom:
	net_dbg_ratelimited("ip6_frag_reasm: no memory for reassembly\n");
out_fail:
	rcu_read_lock();
	__IP6_INC_STATS(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
	rcu_read_unlock();
	inet_frag_kill(&fq->q);
	return -1;
}

开发者ID:Anjali05，项目名称:linux，代码行数:77，代码来源:reassembly.c

示例8: ip6_frag_reasm


//.........这里部分代码省略.........
	if (payload_len > IPV6_MAXPLEN)
		goto out_oversize;

	/* Head of list must not be cloned. */
	if (skb_unclone(head, GFP_ATOMIC))
		goto out_oom;

	/* If the first fragment is fragmented itself, we split
	 * it to two chunks: the first with data and paged part
	 * and the second, holding only fragments. */
	if (skb_has_frag_list(head)) {
		struct sk_buff *clone;
		int i, plen = 0;

		clone = alloc_skb(0, GFP_ATOMIC);
		if (!clone)
			goto out_oom;
		clone->next = head->next;
		head->next = clone;
		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
		skb_frag_list_init(head);
		for (i = 0; i < skb_shinfo(head)->nr_frags; i++)
			plen += skb_frag_size(&skb_shinfo(head)->frags[i]);
		clone->len = clone->data_len = head->data_len - plen;
		head->data_len -= clone->len;
		head->len -= clone->len;
		clone->csum = 0;
		clone->ip_summed = head->ip_summed;
		add_frag_mem_limit(fq->q.net, clone->truesize);
	}

	/* We have to remove fragment header from datagram and to relocate
	 * header in order to calculate ICV correctly. */
	nhoff = fq->nhoffset;
	skb_network_header(head)[nhoff] = skb_transport_header(head)[0];
	memmove(head->head + sizeof(struct frag_hdr), head->head,
		(head->data - head->head) - sizeof(struct frag_hdr));
	if (skb_mac_header_was_set(head))
		head->mac_header += sizeof(struct frag_hdr);
	head->network_header += sizeof(struct frag_hdr);

	skb_reset_transport_header(head);
	skb_push(head, head->data - skb_network_header(head));

	sum_truesize = head->truesize;
	for (fp = head->next; fp;) {
		bool headstolen;
		int delta;
		struct sk_buff *next = fp->next;

		sum_truesize += fp->truesize;
		if (head->ip_summed != fp->ip_summed)
			head->ip_summed = CHECKSUM_NONE;
		else if (head->ip_summed == CHECKSUM_COMPLETE)
			head->csum = csum_add(head->csum, fp->csum);

		if (skb_try_coalesce(head, fp, &headstolen, &delta)) {
			kfree_skb_partial(fp, headstolen);
		} else {
			if (!skb_shinfo(head)->frag_list)
				skb_shinfo(head)->frag_list = fp;
			head->data_len += fp->len;
			head->len += fp->len;
			head->truesize += fp->truesize;
		}
		fp = next;
	}
	sub_frag_mem_limit(fq->q.net, sum_truesize);

	head->next = NULL;
	head->dev = dev;
	head->tstamp = fq->q.stamp;
	ipv6_hdr(head)->payload_len = htons(payload_len);
	ipv6_change_dsfield(ipv6_hdr(head), 0xff, ecn);
	IP6CB(head)->nhoff = nhoff;
	IP6CB(head)->flags |= IP6SKB_FRAGMENTED;
	IP6CB(head)->frag_max_size = fq->q.max_size;

	/* Yes, and fold redundant checksum back. 8) */
	skb_postpush_rcsum(head, skb_network_header(head),
			   skb_network_header_len(head));

	rcu_read_lock();
	__IP6_INC_STATS(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
	rcu_read_unlock();
	fq->q.fragments = NULL;
	fq->q.fragments_tail = NULL;
	return 1;

out_oversize:
	net_dbg_ratelimited("ip6_frag_reasm: payload len = %d\n", payload_len);
	goto out_fail;
out_oom:
	net_dbg_ratelimited("ip6_frag_reasm: no memory for reassembly\n");
out_fail:
	rcu_read_lock();
	__IP6_INC_STATS(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
	rcu_read_unlock();
	return -1;
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:101，代码来源:reassembly.c

示例9: _decode_session6

static inline void
_decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
{
	int onlyproto = 0;
	u16 offset = skb_network_header_len(skb);
	struct ipv6hdr *hdr = ipv6_hdr(skb);
	struct ipv6_opt_hdr *exthdr;
	const unsigned char *nh = skb_network_header(skb);
	u8 nexthdr = nh[IP6CB(skb)->nhoff];

	memset(fl, 0, sizeof(struct flowi));
	ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
	ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);

	while (nh + offset + 1 < skb->data ||
	       pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
		nh = skb_network_header(skb);
		exthdr = (struct ipv6_opt_hdr *)(nh + offset);

		switch (nexthdr) {
		case NEXTHDR_FRAGMENT:
			onlyproto = 1;
		case NEXTHDR_ROUTING:
		case NEXTHDR_HOP:
		case NEXTHDR_DEST:
			offset += ipv6_optlen(exthdr);
			nexthdr = exthdr->nexthdr;
			exthdr = (struct ipv6_opt_hdr *)(nh + offset);
			break;

		case IPPROTO_UDP:
		case IPPROTO_UDPLITE:
		case IPPROTO_TCP:
		case IPPROTO_SCTP:
		case IPPROTO_DCCP:
			if (!onlyproto && (nh + offset + 4 < skb->data ||
			     pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
				__be16 *ports = (__be16 *)exthdr;

				fl->fl_ip_sport = ports[!!reverse];
				fl->fl_ip_dport = ports[!reverse];
			}
			fl->proto = nexthdr;
			return;

		case IPPROTO_ICMPV6:
			if (!onlyproto && pskb_may_pull(skb, nh + offset + 2 - skb->data)) {
				u8 *icmp = (u8 *)exthdr;

				fl->fl_icmp_type = icmp[0];
				fl->fl_icmp_code = icmp[1];
			}
			fl->proto = nexthdr;
			return;

#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
		case IPPROTO_MH:
			if (!onlyproto && pskb_may_pull(skb, nh + offset + 3 - skb->data)) {
				struct ip6_mh *mh;
				mh = (struct ip6_mh *)exthdr;

				fl->fl_mh_type = mh->ip6mh_type;
			}
			fl->proto = nexthdr;
			return;
#endif

		/* XXX Why are there these headers? */
		case IPPROTO_AH:
		case IPPROTO_ESP:
		case IPPROTO_COMP:
		default:
			fl->fl_ipsec_spi = 0;
			fl->proto = nexthdr;
			return;
		}
	}
}

开发者ID:325116067，项目名称:semc-qsd8x50，代码行数:78，代码来源:xfrm6_policy.c

示例10: esp6_input

static int esp6_input(struct xfrm_state *x, struct sk_buff *skb)
{
    struct ipv6hdr *iph;
    struct ipv6_esp_hdr *esph;
    struct esp_data *esp = x->data;
    struct crypto_blkcipher *tfm = esp->conf.tfm;
    struct blkcipher_desc desc = { .tfm = tfm };
    struct sk_buff *trailer;
    int blksize = ALIGN(crypto_blkcipher_blocksize(tfm), 4);
    int alen = esp->auth.icv_trunc_len;
    int elen = skb->len - sizeof(struct ipv6_esp_hdr) - esp->conf.ivlen - alen;
    int hdr_len = skb_network_header_len(skb);
    int nfrags;
    int ret = 0;

    if (!pskb_may_pull(skb, sizeof(struct ipv6_esp_hdr))) {
        ret = -EINVAL;
        goto out;
    }

    if (elen <= 0 || (elen & (blksize-1))) {
        ret = -EINVAL;
        goto out;
    }

    /* If integrity check is required, do this. */
    if (esp->auth.icv_full_len) {
        u8 sum[alen];

        ret = esp_mac_digest(esp, skb, 0, skb->len - alen);
        if (ret)
            goto out;

        if (skb_copy_bits(skb, skb->len - alen, sum, alen))
            BUG();

        if (unlikely(memcmp(esp->auth.work_icv, sum, alen))) {
            x->stats.integrity_failed++;
            ret = -EINVAL;
            goto out;
        }
    }

    if ((nfrags = skb_cow_data(skb, 0, &trailer)) < 0) {
        ret = -EINVAL;
        goto out;
    }

    skb->ip_summed = CHECKSUM_NONE;

    esph = (struct ipv6_esp_hdr*)skb->data;
    iph = ipv6_hdr(skb);

    /* Get ivec. This can be wrong, check against another impls. */
    if (esp->conf.ivlen)
        crypto_blkcipher_set_iv(tfm, esph->enc_data, esp->conf.ivlen);

    {
        u8 nexthdr[2];
        struct scatterlist *sg = &esp->sgbuf[0];
        u8 padlen;

        if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
            sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
            if (!sg) {
                ret = -ENOMEM;
                goto out;
            }
        }
        skb_to_sgvec(skb, sg, sizeof(struct ipv6_esp_hdr) + esp->conf.ivlen, elen);
        ret = crypto_blkcipher_decrypt(&desc, sg, sg, elen);
        if (unlikely(sg != &esp->sgbuf[0]))
            kfree(sg);
        if (unlikely(ret))
            goto out;

        if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
            BUG();

        padlen = nexthdr[0];
        if (padlen+2 >= elen) {
            LIMIT_NETDEBUG(KERN_WARNING "ipsec esp packet is garbage padlen=%d, elen=%d\n", padlen+2, elen);
            ret = -EINVAL;
            goto out;
        }
        /* ... check padding bits here. Silly. :-) */

        pskb_trim(skb, skb->len - alen - padlen - 2);
        ret = nexthdr[1];
    }

    __skb_pull(skb, sizeof(*esph) + esp->conf.ivlen);
    skb_set_transport_header(skb, -hdr_len);
out:
    return ret;
}

开发者ID:ruigulala，项目名称:helgrind_uml，代码行数:96，代码来源:esp6.c

示例11: ip6_input_finish

static int ip6_input_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
    const struct inet6_protocol *ipprot;
    struct inet6_dev *idev;
    unsigned int nhoff;
    int nexthdr;
    bool raw;
    bool have_final = false;

    /*
     *	Parse extension headers
     */

    rcu_read_lock();
resubmit:
    idev = ip6_dst_idev(skb_dst(skb));
    if (!pskb_pull(skb, skb_transport_offset(skb)))
        goto discard;
    nhoff = IP6CB(skb)->nhoff;
    nexthdr = skb_network_header(skb)[nhoff];

resubmit_final:
    raw = raw6_local_deliver(skb, nexthdr);
    ipprot = rcu_dereference(inet6_protos[nexthdr]);
    if (ipprot) {
        int ret;

        if (have_final) {
            if (!(ipprot->flags & INET6_PROTO_FINAL)) {
                /* Once we've seen a final protocol don't
                 * allow encapsulation on any non-final
                 * ones. This allows foo in UDP encapsulation
                 * to work.
                 */
                goto discard;
            }
        } else if (ipprot->flags & INET6_PROTO_FINAL) {
            const struct ipv6hdr *hdr;

            /* Only do this once for first final protocol */
            have_final = true;

            /* Free reference early: we don't need it any more,
               and it may hold ip_conntrack module loaded
               indefinitely. */
            nf_reset(skb);

            skb_postpull_rcsum(skb, skb_network_header(skb),
                               skb_network_header_len(skb));
            hdr = ipv6_hdr(skb);
            if (ipv6_addr_is_multicast(&hdr->daddr) &&
                    !ipv6_chk_mcast_addr(skb->dev, &hdr->daddr,
                                         &hdr->saddr) &&
                    !ipv6_is_mld(skb, nexthdr, skb_network_header_len(skb)))
                goto discard;
        }
        if (!(ipprot->flags & INET6_PROTO_NOPOLICY) &&
                !xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
            goto discard;

        ret = ipprot->handler(skb);
        if (ret > 0) {
            if (ipprot->flags & INET6_PROTO_FINAL) {
                /* Not an extension header, most likely UDP
                 * encapsulation. Use return value as nexthdr
                 * protocol not nhoff (which presumably is
                 * not set by handler).
                 */
                nexthdr = ret;
                goto resubmit_final;
            } else {
                goto resubmit;
            }
        } else if (ret == 0) {
            __IP6_INC_STATS(net, idev, IPSTATS_MIB_INDELIVERS);
        }
    } else {
        if (!raw) {
            if (xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
                __IP6_INC_STATS(net, idev,
                                IPSTATS_MIB_INUNKNOWNPROTOS);
                icmpv6_send(skb, ICMPV6_PARAMPROB,
                            ICMPV6_UNK_NEXTHDR, nhoff);
            }
            kfree_skb(skb);
        } else {
            __IP6_INC_STATS(net, idev, IPSTATS_MIB_INDELIVERS);
            consume_skb(skb);
        }
    }
    rcu_read_unlock();
    return 0;

discard:
    __IP6_INC_STATS(net, idev, IPSTATS_MIB_INDISCARDS);
    rcu_read_unlock();
    kfree_skb(skb);
    return 0;
}

开发者ID:oldzhu，项目名称:linux，代码行数:99，代码来源:ip6_input.c

示例12: inet6_sk

struct sk_buff *__ip6_make_skb(struct sock *sk,
			       struct sk_buff_head *queue,
			       struct inet_cork_full *cork,
			       struct inet6_cork *v6_cork)
{
	struct sk_buff *skb, *tmp_skb;
	struct sk_buff **tail_skb;
	struct in6_addr final_dst_buf, *final_dst = &final_dst_buf;
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct net *net = sock_net(sk);
	struct ipv6hdr *hdr;
	struct ipv6_txoptions *opt = v6_cork->opt;
	struct rt6_info *rt = (struct rt6_info *)cork->base.dst;
	struct flowi6 *fl6 = &cork->fl.u.ip6;
	unsigned char proto = fl6->flowi6_proto;

	skb = __skb_dequeue(queue);
	if (!skb)
		goto out;
	tail_skb = &(skb_shinfo(skb)->frag_list);

	/* move skb->data to ip header from ext header */
	if (skb->data < skb_network_header(skb))
		__skb_pull(skb, skb_network_offset(skb));
	while ((tmp_skb = __skb_dequeue(queue)) != NULL) {
		__skb_pull(tmp_skb, skb_network_header_len(skb));
		*tail_skb = tmp_skb;
		tail_skb = &(tmp_skb->next);
		skb->len += tmp_skb->len;
		skb->data_len += tmp_skb->len;
		skb->truesize += tmp_skb->truesize;
		tmp_skb->destructor = NULL;
		tmp_skb->sk = NULL;
	}

	/* Allow local fragmentation. */
	skb->ignore_df = ip6_sk_ignore_df(sk);

	*final_dst = fl6->daddr;
	__skb_pull(skb, skb_network_header_len(skb));
	if (opt && opt->opt_flen)
		ipv6_push_frag_opts(skb, opt, &proto);
	if (opt && opt->opt_nflen)
		ipv6_push_nfrag_opts(skb, opt, &proto, &final_dst);

	skb_push(skb, sizeof(struct ipv6hdr));
	skb_reset_network_header(skb);
	hdr = ipv6_hdr(skb);

	ip6_flow_hdr(hdr, v6_cork->tclass,
		     ip6_make_flowlabel(net, skb, fl6->flowlabel,
					np->autoflowlabel, fl6));
	hdr->hop_limit = v6_cork->hop_limit;
	hdr->nexthdr = proto;
	hdr->saddr = fl6->saddr;
	hdr->daddr = *final_dst;

	skb->priority = sk->sk_priority;
	skb->mark = sk->sk_mark;

	skb_dst_set(skb, dst_clone(&rt->dst));
	IP6_UPD_PO_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
	if (proto == IPPROTO_ICMPV6) {
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		ICMP6MSGOUT_INC_STATS(net, idev, icmp6_hdr(skb)->icmp6_type);
		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
	}

	ip6_cork_release(cork, v6_cork);
out:
	return skb;
}

开发者ID:guanhe0，项目名称:kernel，代码行数:73，代码来源:ip6_output.c

示例13: ipv6_frag_rcv

static int ipv6_frag_rcv(struct sk_buff *skb)
{
	struct frag_hdr *fhdr;
	struct frag_queue *fq;
	const struct ipv6hdr *hdr = ipv6_hdr(skb);
	struct net *net = dev_net(skb_dst(skb)->dev);
	int iif;

	if (IP6CB(skb)->flags & IP6SKB_FRAGMENTED)
		goto fail_hdr;

	__IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMREQDS);

	/* Jumbo payload inhibits frag. header */
	if (hdr->payload_len == 0)
		goto fail_hdr;

	if (!pskb_may_pull(skb, (skb_transport_offset(skb) +
				 sizeof(struct frag_hdr))))
		goto fail_hdr;

	hdr = ipv6_hdr(skb);
	fhdr = (struct frag_hdr *)skb_transport_header(skb);

	if (!(fhdr->frag_off & htons(0xFFF9))) {
		/* It is not a fragmented frame */
		skb->transport_header += sizeof(struct frag_hdr);
		__IP6_INC_STATS(net,
				ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMOKS);

		IP6CB(skb)->nhoff = (u8 *)fhdr - skb_network_header(skb);
		IP6CB(skb)->flags |= IP6SKB_FRAGMENTED;
		return 1;
	}

	iif = skb->dev ? skb->dev->ifindex : 0;
	fq = fq_find(net, fhdr->identification, hdr, iif);
	if (fq) {
		u32 prob_offset = 0;
		int ret;

		spin_lock(&fq->q.lock);

		fq->iif = iif;
		ret = ip6_frag_queue(fq, skb, fhdr, IP6CB(skb)->nhoff,
				     &prob_offset);

		spin_unlock(&fq->q.lock);
		inet_frag_put(&fq->q);
		if (prob_offset) {
			__IP6_INC_STATS(net, __in6_dev_get_safely(skb->dev),
					IPSTATS_MIB_INHDRERRORS);
			/* icmpv6_param_prob() calls kfree_skb(skb) */
			icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, prob_offset);
		}
		return ret;
	}

	__IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMFAILS);
	kfree_skb(skb);
	return -1;

fail_hdr:
	__IP6_INC_STATS(net, __in6_dev_get_safely(skb->dev),
			IPSTATS_MIB_INHDRERRORS);
	icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, skb_network_header_len(skb));
	return -1;
}

开发者ID:Anjali05，项目名称:linux，代码行数:68，代码来源:reassembly.c

示例14: ip6_push_pending_frames

int ip6_push_pending_frames(struct sock *sk)
{
	struct sk_buff *skb, *tmp_skb;
	struct sk_buff **tail_skb;
	struct in6_addr final_dst_buf, *final_dst = &final_dst_buf;
	struct inet_sock *inet = inet_sk(sk);
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct net *net = sock_net(sk);
	struct ipv6hdr *hdr;
	struct ipv6_txoptions *opt = np->cork.opt;
	struct rt6_info *rt = (struct rt6_info *)inet->cork.base.dst;
	struct flowi6 *fl6 = &inet->cork.fl.u.ip6;
	unsigned char proto = fl6->flowi6_proto;
	int err = 0;

	if ((skb = __skb_dequeue(&sk->sk_write_queue)) == NULL)
		goto out;
	tail_skb = &(skb_shinfo(skb)->frag_list);

	/* move skb->data to ip header from ext header */
	if (skb->data < skb_network_header(skb))
		__skb_pull(skb, skb_network_offset(skb));
	while ((tmp_skb = __skb_dequeue(&sk->sk_write_queue)) != NULL) {
		__skb_pull(tmp_skb, skb_network_header_len(skb));
		*tail_skb = tmp_skb;
		tail_skb = &(tmp_skb->next);
		skb->len += tmp_skb->len;
		skb->data_len += tmp_skb->len;
		skb->truesize += tmp_skb->truesize;
		tmp_skb->destructor = NULL;
		tmp_skb->sk = NULL;
	}

	/* Allow local fragmentation. */
	if (np->pmtudisc < IPV6_PMTUDISC_DO)
		skb->local_df = 1;

	ipv6_addr_copy(final_dst, &fl6->daddr);
	__skb_pull(skb, skb_network_header_len(skb));
	if (opt && opt->opt_flen)
		ipv6_push_frag_opts(skb, opt, &proto);
	if (opt && opt->opt_nflen)
		ipv6_push_nfrag_opts(skb, opt, &proto, &final_dst);

	skb_push(skb, sizeof(struct ipv6hdr));
	skb_reset_network_header(skb);
	hdr = ipv6_hdr(skb);

	*(__be32*)hdr = fl6->flowlabel |
		     htonl(0x60000000 | ((int)np->cork.tclass << 20));

	hdr->hop_limit = np->cork.hop_limit;
	hdr->nexthdr = proto;
	ipv6_addr_copy(&hdr->saddr, &fl6->saddr);
	ipv6_addr_copy(&hdr->daddr, final_dst);

	skb->priority = sk->sk_priority;
	skb->mark = sk->sk_mark;

	skb_dst_set(skb, dst_clone(&rt->dst));
	IP6_UPD_PO_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
	if (proto == IPPROTO_ICMPV6) {
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		ICMP6MSGOUT_INC_STATS_BH(net, idev, icmp6_hdr(skb)->icmp6_type);
		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
	}

	err = ip6_local_out(skb);
	if (err) {
		if (err > 0)
			err = net_xmit_errno(err);
		if (err)
			goto error;
	}

out:
	ip6_cork_release(inet, np);
	return err;
error:
	IP6_INC_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUTDISCARDS);
	goto out;
}

开发者ID:caoxin1988，项目名称:linux-3.0.86，代码行数:83，代码来源:ip6_output.c

示例15: _decode_session6

static inline void
_decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
{
	struct flowi6 *fl6 = &fl->u.ip6;
	int onlyproto = 0;
	u16 offset = skb_network_header_len(skb);
	const struct ipv6hdr *hdr = ipv6_hdr(skb);
	struct ipv6_opt_hdr *exthdr;
	const unsigned char *nh = skb_network_header(skb);
	u8 nexthdr = nh[IP6CB(skb)->nhoff];
	int oif = 0;

	if (skb_dst(skb))
		oif = skb_dst(skb)->dev->ifindex;

	memset(fl6, 0, sizeof(struct flowi6));
	fl6->flowi6_mark = skb->mark;
	fl6->flowi6_oif = reverse ? skb->skb_iif : oif;

	fl6->daddr = reverse ? hdr->saddr : hdr->daddr;
	fl6->saddr = reverse ? hdr->daddr : hdr->saddr;

	while (nh + offset + 1 < skb->data ||
	       pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
		nh = skb_network_header(skb);
		exthdr = (struct ipv6_opt_hdr *)(nh + offset);

		switch (nexthdr) {
		case NEXTHDR_FRAGMENT:
			onlyproto = 1;
		case NEXTHDR_ROUTING:
		case NEXTHDR_HOP:
		case NEXTHDR_DEST:
			offset += ipv6_optlen(exthdr);
			nexthdr = exthdr->nexthdr;
			exthdr = (struct ipv6_opt_hdr *)(nh + offset);
			break;

		case IPPROTO_UDP:
		case IPPROTO_UDPLITE:
		case IPPROTO_TCP:
		case IPPROTO_SCTP:
		case IPPROTO_DCCP:
			if (!onlyproto && (nh + offset + 4 < skb->data ||
			     pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
				__be16 *ports;

				nh = skb_network_header(skb);
				ports = (__be16 *)(nh + offset);
				fl6->fl6_sport = ports[!!reverse];
				fl6->fl6_dport = ports[!reverse];
			}
			fl6->flowi6_proto = nexthdr;
			return;

		case IPPROTO_ICMPV6:
			if (!onlyproto && pskb_may_pull(skb, nh + offset + 2 - skb->data)) {
				u8 *icmp;

				nh = skb_network_header(skb);
				icmp = (u8 *)(nh + offset);
				fl6->fl6_icmp_type = icmp[0];
				fl6->fl6_icmp_code = icmp[1];
			}
			fl6->flowi6_proto = nexthdr;
			return;

#if IS_ENABLED(CONFIG_IPV6_MIP6)
		case IPPROTO_MH:
			if (!onlyproto && pskb_may_pull(skb, nh + offset + 3 - skb->data)) {
				struct ip6_mh *mh;

				nh = skb_network_header(skb);
				mh = (struct ip6_mh *)(nh + offset);
				fl6->fl6_mh_type = mh->ip6mh_type;
			}
			fl6->flowi6_proto = nexthdr;
			return;
#endif

		/* XXX Why are there these headers? */
		case IPPROTO_AH:
		case IPPROTO_ESP:
		case IPPROTO_COMP:
		default:
			fl6->fl6_ipsec_spi = 0;
			fl6->flowi6_proto = nexthdr;
			return;
		}
	}
}

开发者ID:383530895，项目名称:linux，代码行数:91，代码来源:xfrm6_policy.c

注：本文中的skb_network_header_len函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ skb_orphan函数代码示例发布时间：2022-05-30

C++ skb_network_header函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19135|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ skb_network_header_len函数代码示例

示例1: ipv6_frag_rcv

示例2: ip_local_deliver_finish

示例3: tarpit_tg6

示例4: ip6_frag_reasm

示例5: tcp_connect

示例6: ip6_input_icmp_cheat

示例7: ip6_frag_reasm

示例8: ip6_frag_reasm

示例9: _decode_session6

示例10: esp6_input

示例11: ip6_input_finish

示例12: inet6_sk

示例13: ipv6_frag_rcv

示例14: ip6_push_pending_frames

示例15: _decode_session6

请发表评论

全部评论

上一篇：

下一篇：

Delphi中关于资源释放（Free/release/freeA

bradtraversy/iweather: Ionic 3 mobile we

CVE-2022-34918

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053