C++ skb_cow_head函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中skb_cow_head函数的典型用法代码示例。如果您正苦于以下问题：C++ skb_cow_head函数的具体用法？C++ skb_cow_head怎么用？C++ skb_cow_head使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了skb_cow_head函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: geneve_xmit_skb

/* Transmit a fully formatted Geneve frame.
 *
 * When calling this function. The skb->data should point
 * to the geneve header which is fully formed.
 *
 * This function will add other UDP tunnel headers.
 */
int geneve_xmit_skb(struct geneve_sock *gs, struct rtable *rt,
		    struct sk_buff *skb, __be32 src, __be32 dst, __u8 tos,
		    __u8 ttl, __be16 df, __be16 src_port, __be16 dst_port,
		    __be16 tun_flags, u8 vni[3], u8 opt_len, u8 *opt,
		    bool xnet)
{
	struct genevehdr *gnvh;
	int min_headroom;
	int err;

	skb = udp_tunnel_handle_offloads(skb, !gs->sock->sk->sk_no_check_tx);

	min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len
			+ GENEVE_BASE_HLEN + opt_len + sizeof(struct iphdr)
			+ (vlan_tx_tag_present(skb) ? VLAN_HLEN : 0);

	err = skb_cow_head(skb, min_headroom);
	if (unlikely(err))
		return err;

	skb = vlan_hwaccel_push_inside(skb);
	if (unlikely(!skb))
		return -ENOMEM;

	gnvh = (struct genevehdr *)__skb_push(skb, sizeof(*gnvh) + opt_len);
	geneve_build_header(gnvh, tun_flags, vni, opt_len, opt);

	skb_set_inner_protocol(skb, htons(ETH_P_TEB));

	return udp_tunnel_xmit_skb(gs->sock, rt, skb, src, dst,
				   tos, ttl, df, src_port, dst_port, xnet);
}

开发者ID:383530895，项目名称:linux，代码行数:39，代码来源:geneve.c

示例2: gre_tap_xmit

static netdev_tx_t gre_tap_xmit(struct sk_buff *skb,
				struct net_device *dev)
{
	struct ip_tunnel *tunnel = netdev_priv(dev);

	if (OVTYPE_IS_GRETAP (skb)) {
		gretap_gre_tap_xmit_in (skb) = rdtsc ();
	}

	skb = gre_handle_offloads(skb, !!(tunnel->parms.o_flags&TUNNEL_CSUM));
	if (IS_ERR(skb))
		goto out;

	if (skb_cow_head(skb, dev->needed_headroom))
		goto free_skb;

	__gre_xmit(skb, dev, &tunnel->parms.iph, htons(ETH_P_TEB));

	return NETDEV_TX_OK;

free_skb:
	kfree_skb(skb);
out:
	dev->stats.tx_dropped++;
	return NETDEV_TX_OK;
}

开发者ID:upa，项目名称:ovbench，代码行数:26，代码来源:ip_gre.c

示例3: i2400m_hard_start_xmit

/*
 * Transmit a packet to the base station on behalf of the network stack
 *
 *
 * Returns: NETDEV_TX_OK (always, even in case of error)
 *
 * In case of error, we just drop it. Reasons:
 *
 *  - we add a hw header to each skb, and if the network stack
 *    retries, we have no way to know if that skb has it or not.
 *
 *  - network protocols have their own drop-recovery mechanisms
 *
 *  - there is not much else we can do
 *
 * If the device is idle, we need to wake it up; that is an operation
 * that will sleep. See i2400m_net_wake_tx() for details.
 */
static
netdev_tx_t i2400m_hard_start_xmit(struct sk_buff *skb,
					 struct net_device *net_dev)
{
	struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
	struct device *dev = i2400m_dev(i2400m);
	int result = -1;

	d_fnstart(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);

	if (skb_cow_head(skb, 0))
		goto drop;

	if (i2400m->state == I2400M_SS_IDLE)
		result = i2400m_net_wake_tx(i2400m, net_dev, skb);
	else
		result = i2400m_net_tx(i2400m, net_dev, skb);
	if (result <  0) {
drop:
		net_dev->stats.tx_dropped++;
	} else {
		net_dev->stats.tx_packets++;
		net_dev->stats.tx_bytes += skb->len;
	}
	dev_kfree_skb(skb);
	d_fnend(3, dev, "(skb %p net_dev %p) = %d\n", skb, net_dev, result);
	return NETDEV_TX_OK;
}

开发者ID:020gzh，项目名称:linux，代码行数:46，代码来源:netdev.c

示例4: xlgmac_prep_tso

static int xlgmac_prep_tso(struct sk_buff *skb,
			   struct xlgmac_pkt_info *pkt_info)
{
	int ret;

	if (!XLGMAC_GET_REG_BITS(pkt_info->attributes,
				 TX_PACKET_ATTRIBUTES_TSO_ENABLE_POS,
				 TX_PACKET_ATTRIBUTES_TSO_ENABLE_LEN))
		return 0;

	ret = skb_cow_head(skb, 0);
	if (ret)
		return ret;

	pkt_info->header_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
	pkt_info->tcp_header_len = tcp_hdrlen(skb);
	pkt_info->tcp_payload_len = skb->len - pkt_info->header_len;
	pkt_info->mss = skb_shinfo(skb)->gso_size;

	XLGMAC_PR("header_len=%u\n", pkt_info->header_len);
	XLGMAC_PR("tcp_header_len=%u, tcp_payload_len=%u\n",
		  pkt_info->tcp_header_len, pkt_info->tcp_payload_len);
	XLGMAC_PR("mss=%u\n", pkt_info->mss);

	/* Update the number of packets that will ultimately be transmitted
	 * along with the extra bytes for each extra packet
	 */
	pkt_info->tx_packets = skb_shinfo(skb)->gso_segs;
	pkt_info->tx_bytes += (pkt_info->tx_packets - 1) * pkt_info->header_len;

	return 0;
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:32，代码来源:dwc-xlgmac-net.c

示例5: push_eth

static int push_eth(struct sk_buff *skb, struct sw_flow_key *key,
		    const struct ovs_action_push_eth *ethh)
{
	struct ethhdr *hdr;

	/* Add the new Ethernet header */
	if (skb_cow_head(skb, ETH_HLEN) < 0)
		return -ENOMEM;

	skb_push(skb, ETH_HLEN);
	skb_reset_mac_header(skb);
	skb_reset_mac_len(skb);

	hdr = eth_hdr(skb);
	ether_addr_copy(hdr->h_source, ethh->addresses.eth_src);
	ether_addr_copy(hdr->h_dest, ethh->addresses.eth_dst);
	hdr->h_proto = skb->protocol;

	skb_postpush_rcsum(skb, hdr, ETH_HLEN);

	/* safe right before invalidate_flow_key */
	key->mac_proto = MAC_PROTO_ETHERNET;
	invalidate_flow_key(key);
	return 0;
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:25，代码来源:actions.c

示例6: push_mpls

static int push_mpls(struct sk_buff *skb, struct sw_flow_key *key,
		     const struct ovs_action_push_mpls *mpls)
{
	struct mpls_shim_hdr *new_mpls_lse;

	/* Networking stack do not allow simultaneous Tunnel and MPLS GSO. */
	if (skb->encapsulation)
		return -ENOTSUPP;

	if (skb_cow_head(skb, MPLS_HLEN) < 0)
		return -ENOMEM;

	if (!skb->inner_protocol) {
		skb_set_inner_network_header(skb, skb->mac_len);
		skb_set_inner_protocol(skb, skb->protocol);
	}

	skb_push(skb, MPLS_HLEN);
	memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb),
		skb->mac_len);
	skb_reset_mac_header(skb);
	skb_set_network_header(skb, skb->mac_len);

	new_mpls_lse = mpls_hdr(skb);
	new_mpls_lse->label_stack_entry = mpls->mpls_lse;

	skb_postpush_rcsum(skb, new_mpls_lse, MPLS_HLEN);

	if (ovs_key_mac_proto(key) == MAC_PROTO_ETHERNET)
		update_ethertype(skb, eth_hdr(skb), mpls->mpls_ethertype);
	skb->protocol = mpls->mpls_ethertype;

	invalidate_flow_key(key);
	return 0;
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:35，代码来源:actions.c

示例7: xfrm6_beet_input

static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb)
{
	struct ipv6hdr *ip6h;
	const unsigned char *old_mac;
	int size = sizeof(struct ipv6hdr);
	int err;

	err = skb_cow_head(skb, size + skb->mac_len);
	if (err)
		goto out;

	__skb_push(skb, size);
	skb_reset_network_header(skb);

	old_mac = skb_mac_header(skb);
	skb_set_mac_header(skb, -skb->mac_len);
	memmove(skb_mac_header(skb), old_mac, skb->mac_len);

	xfrm6_beet_make_header(skb);

	ip6h = ipv6_hdr(skb);
	ip6h->payload_len = htons(skb->len - size);
	ipv6_addr_copy(&ip6h->daddr, (struct in6_addr *) &x->sel.daddr.a6);
	ipv6_addr_copy(&ip6h->saddr, (struct in6_addr *) &x->sel.saddr.a6);
	err = 0;
out:
	return err;
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:28，代码来源:xfrm6_mode_beet.c

示例8: dsa_slave_to_port

static struct sk_buff *lan9303_xmit(struct sk_buff *skb, struct net_device *dev)
{
	struct dsa_port *dp = dsa_slave_to_port(dev);
	u16 *lan9303_tag;

	/* insert a special VLAN tag between the MAC addresses
	 * and the current ethertype field.
	 */
	if (skb_cow_head(skb, LAN9303_TAG_LEN) < 0) {
		dev_dbg(&dev->dev,
			"Cannot make room for the special tag. Dropping packet\n");
		return NULL;
	}

	/* provide 'LAN9303_TAG_LEN' bytes additional space */
	skb_push(skb, LAN9303_TAG_LEN);

	/* make room between MACs and Ether-Type */
	memmove(skb->data, skb->data + LAN9303_TAG_LEN, 2 * ETH_ALEN);

	lan9303_tag = (u16 *)(skb->data + 2 * ETH_ALEN);
	lan9303_tag[0] = htons(ETH_P_8021Q);
	lan9303_tag[1] = lan9303_xmit_use_arl(dp, skb->data) ?
				LAN9303_TAG_TX_USE_ALR :
				dp->index | LAN9303_TAG_TX_STP_OVERRIDE;
	lan9303_tag[1] = htons(lan9303_tag[1]);

	return skb;
}

开发者ID:Lyude，项目名称:linux，代码行数:29，代码来源:tag_lan9303.c

示例9: push_mpls

static int push_mpls(struct sk_buff *skb, struct sw_flow_key *key,
		     const struct ovs_action_push_mpls *mpls)
{
	__be32 *new_mpls_lse;

	/* Networking stack do not allow simultaneous Tunnel and MPLS GSO. */
	if (skb->encapsulation)
		return -ENOTSUPP;

	if (skb_cow_head(skb, MPLS_HLEN) < 0)
		return -ENOMEM;

	skb_push(skb, MPLS_HLEN);
	memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb),
		skb->mac_len);
	skb_reset_mac_header(skb);

	new_mpls_lse = (__be32 *)skb_mpls_header(skb);
	*new_mpls_lse = mpls->mpls_lse;

	skb_postpush_rcsum(skb, new_mpls_lse, MPLS_HLEN);

	update_ethertype(skb, eth_hdr(skb), mpls->mpls_ethertype);
	if (!skb->inner_protocol)
		skb_set_inner_protocol(skb, skb->protocol);
	skb->protocol = mpls->mpls_ethertype;

	invalidate_flow_key(key);
	return 0;
}

开发者ID:513855417，项目名称:linux，代码行数:30，代码来源:actions.c

示例10: push_mpls

static int push_mpls(struct sk_buff *skb,
		     const struct ovs_action_push_mpls *mpls)
{
	__be32 *new_mpls_lse;
	struct ethhdr *hdr;

	if (skb_cow_head(skb, MPLS_HLEN) < 0)
		return -ENOMEM;

	skb_push(skb, MPLS_HLEN);
	memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb),
		skb->mac_len);
	skb_reset_mac_header(skb);

	new_mpls_lse = (__be32 *)mac_header_end(skb);
	*new_mpls_lse = mpls->mpls_lse;

	if (skb->ip_summed == CHECKSUM_COMPLETE)
		skb->csum = csum_add(skb->csum, csum_partial(new_mpls_lse,
							     MPLS_HLEN, 0));

	hdr = eth_hdr(skb);
	hdr->h_proto = mpls->mpls_ethertype;
	if (!ovs_skb_get_inner_protocol(skb))
		ovs_skb_set_inner_protocol(skb, skb->protocol);
	skb->protocol = mpls->mpls_ethertype;
	return 0;
}

开发者ID:alexpilotti，项目名称:ovs-test1，代码行数:28，代码来源:actions.c

示例11: push_mpls

static int push_mpls(struct sk_buff *skb, struct sw_flow_key *key,
		     const struct ovs_action_push_mpls *mpls)
{
	__be32 *new_mpls_lse;
	struct ethhdr *hdr;

	/* Networking stack do not allow simultaneous Tunnel and MPLS GSO. */
	if (skb->encapsulation)
		return -ENOTSUPP;

	if (skb_cow_head(skb, MPLS_HLEN) < 0)
		return -ENOMEM;

	skb_push(skb, MPLS_HLEN);
	memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb),
		skb->mac_len);
	skb_reset_mac_header(skb);

	new_mpls_lse = (__be32 *)skb_mpls_header(skb);
	*new_mpls_lse = mpls->mpls_lse;

	if (skb->ip_summed == CHECKSUM_COMPLETE)
		skb->csum = csum_add(skb->csum, csum_partial(new_mpls_lse,
							     MPLS_HLEN, 0));

	hdr = eth_hdr(skb);
	hdr->h_proto = mpls->mpls_ethertype;

	if (!skb->inner_protocol)
		skb_set_inner_protocol(skb, skb->protocol);
	skb->protocol = mpls->mpls_ethertype;

	invalidate_flow_key(key);
	return 0;
}

开发者ID:Seagate，项目名称:SMR_FS-EXT4，代码行数:35，代码来源:actions.c

示例12: ipgre_xmit

static netdev_tx_t ipgre_xmit(struct sk_buff *skb,
			      struct net_device *dev)
{
	struct ip_tunnel *tunnel = netdev_priv(dev);
	const struct iphdr *tnl_params;

	if (OVTYPE_IS_GRE (skb)) {
		gre_ipgre_xmit_in (skb) = rdtsc ();
	}

	if (dev->header_ops) {
		/* Need space for new headers */
		if (skb_cow_head(skb, dev->needed_headroom -
				      (tunnel->hlen + sizeof(struct iphdr))))
			goto free_skb;

		tnl_params = (const struct iphdr *)skb->data;

		/* Pull skb since ip_tunnel_xmit() needs skb->data pointing
		 * to gre header.
		 */
		skb_pull(skb, tunnel->hlen + sizeof(struct iphdr));
		skb_reset_mac_header(skb);
	} else {
		if (skb_cow_head(skb, dev->needed_headroom))
			goto free_skb;

		tnl_params = &tunnel->parms.iph;
	}

	skb = gre_handle_offloads(skb, !!(tunnel->parms.o_flags&TUNNEL_CSUM));
	if (IS_ERR(skb))
		goto out;

	__gre_xmit(skb, dev, tnl_params, skb->protocol);

	return NETDEV_TX_OK;

free_skb:
	kfree_skb(skb);
out:
	dev->stats.tx_dropped++;
	return NETDEV_TX_OK;
}

开发者ID:upa，项目名称:ovbench，代码行数:44，代码来源:ip_gre.c

示例13: rawsock_add_header

static int rawsock_add_header(struct sk_buff *skb)
{

	if (skb_cow_head(skb, 1))
		return -ENOMEM;

	*skb_push(skb, 1) = 0;

	return 0;
}

开发者ID:303750856，项目名称:linux-3.1，代码行数:10，代码来源:rawsock.c

示例14: nci_add_rx_data_frag

static void nci_add_rx_data_frag(struct nci_dev *ndev,
				 struct sk_buff *skb,
				 __u8 pbf, __u8 conn_id, __u8 status)
{
	int reassembly_len;
	int err = 0;

	if (status) {
		err = status;
		goto exit;
	}

	if (ndev->rx_data_reassembly) {
		reassembly_len = ndev->rx_data_reassembly->len;

		/* first, make enough room for the already accumulated data */
		if (skb_cow_head(skb, reassembly_len)) {
			pr_err("error adding room for accumulated rx data\n");

			kfree_skb(skb);
			skb = NULL;

			kfree_skb(ndev->rx_data_reassembly);
			ndev->rx_data_reassembly = NULL;

			err = -ENOMEM;
			goto exit;
		}

		/* second, combine the two fragments */
		memcpy(skb_push(skb, reassembly_len),
		       ndev->rx_data_reassembly->data,
		       reassembly_len);

		/* third, free old reassembly */
		kfree_skb(ndev->rx_data_reassembly);
		ndev->rx_data_reassembly = NULL;
	}

	if (pbf == NCI_PBF_CONT) {
		/* need to wait for next fragment, store skb and exit */
		ndev->rx_data_reassembly = skb;
		return;
	}

exit:
	if (ndev->nfc_dev->rf_mode == NFC_RF_TARGET) {
		/* Data received in Target mode, forward to nfc core */
		err = nfc_tm_data_received(ndev->nfc_dev, skb);
		if (err)
			pr_err("unable to handle received data\n");
	} else {
		nci_data_exchange_complete(ndev, skb, conn_id, err);
	}
}

开发者ID:020gzh，项目名称:linux，代码行数:55，代码来源:data.c

示例15: vxlan_xmit_skb

int vxlan_xmit_skb(struct vxlan_sock *vs,
		   struct rtable *rt, struct sk_buff *skb,
		   __be32 src, __be32 dst, __u8 tos, __u8 ttl, __be16 df,
		   __be16 src_port, __be16 dst_port, __be32 vni)
{
	struct vxlanhdr *vxh;
	struct udphdr *uh;
	int min_headroom;
	int err;

	min_headroom = LL_RESERVED_SPACE(rt_dst(rt).dev) + rt_dst(rt).header_len
			+ VXLAN_HLEN + sizeof(struct iphdr)
			+ (vlan_tx_tag_present(skb) ? VLAN_HLEN : 0);

	/* Need space for new headers (invalidates iph ptr) */
	err = skb_cow_head(skb, min_headroom);
	if (unlikely(err)) {
		kfree_skb(skb);
		return err;
	}

	if (vlan_tx_tag_present(skb)) {
		if (unlikely(!vlan_insert_tag_set_proto(skb,
							skb->vlan_proto,
							vlan_tx_tag_get(skb))))
			return -ENOMEM;

		vlan_set_tci(skb, 0);
	}

	skb_reset_inner_headers(skb);

	vxh = (struct vxlanhdr *) __skb_push(skb, sizeof(*vxh));
	vxh->vx_flags = htonl(VXLAN_FLAGS);
	vxh->vx_vni = vni;

	__skb_push(skb, sizeof(*uh));
	skb_reset_transport_header(skb);
	uh = udp_hdr(skb);

	uh->dest = dst_port;
	uh->source = src_port;

	uh->len = htons(skb->len);
	uh->check = 0;

	vxlan_set_owner(vs->sock->sk, skb);

	skb = handle_offloads(skb);
	if (IS_ERR(skb))
		return PTR_ERR(skb);

	return iptunnel_xmit(vs->sock->sk, rt, skb, src, dst, IPPROTO_UDP,
			     tos, ttl, df, false);
}

开发者ID:Altiscale，项目名称:ovs，代码行数:55，代码来源:vxlan.c

示例16: ipgre_xmit

static netdev_tx_t ipgre_xmit(struct sk_buff *skb,
			      struct net_device *dev)
{
	struct ip_tunnel *tunnel = netdev_priv(dev);
	const struct iphdr *tnl_params;

	skb = handle_offloads(tunnel, skb);
	if (IS_ERR(skb))
		goto out;

	if (dev->header_ops) {
		/* Need space for new headers */
		if (skb_cow_head(skb, dev->needed_headroom -
				      (tunnel->hlen + sizeof(struct iphdr))))
			goto free_skb;

		tnl_params = (const struct iphdr *)skb->data;

		/* Pull skb since ip_tunnel_xmit() needs skb->data pointing
		 * to gre header.
		 */
		skb_pull(skb, tunnel->hlen + sizeof(struct iphdr));
	} else {
		if (skb_cow_head(skb, dev->needed_headroom))
			goto free_skb;

		tnl_params = &tunnel->parms.iph;
	}

	__gre_xmit(skb, dev, tnl_params, skb->protocol);

	return NETDEV_TX_OK;

free_skb:
	dev_kfree_skb(skb);
out:
	dev->stats.tx_dropped++;
	return NETDEV_TX_OK;
}

开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:39，代码来源:ip_gre.c

示例17: nf_bridge_copy_header

/*
 * When forwarding bridge frames, we save a copy of the original
 * header before processing.
 */
int nf_bridge_copy_header(struct sk_buff *skb)
{
	int err;
	int header_size = ETH_HLEN + nf_bridge_encap_header_len(skb);

	err = skb_cow_head(skb, header_size);
	if (err)
		return err;

	skb_copy_to_linear_data_offset(skb, -header_size,
				       skb->nf_bridge->data, header_size);
	__skb_push(skb, nf_bridge_encap_header_len(skb));
	return 0;
}

开发者ID:mecke，项目名称:linux-2.6，代码行数:18，代码来源:br_netfilter.c

示例18: nf_bridge_copy_header

/* Fill in the header for fragmented IP packets handled by
 * the IPv4 connection tracking code.
 */
int nf_bridge_copy_header(struct sk_buff *skb) {
  int err;
  unsigned int header_size;

  nf_bridge_update_protocol(skb);
  header_size = ETH_HLEN + nf_bridge_encap_header_len(skb);
  err = skb_cow_head(skb, header_size);
  if (err) {
    return err;
  }

  skb_copy_to_linear_data_offset(skb, -header_size,
                                 skb->nf_bridge->data, header_size);
  __skb_push(skb, nf_bridge_encap_header_len(skb));
  return 0;
}

开发者ID:tidatida，项目名称:lagopus，代码行数:19，代码来源:br_netfilter.c

示例19: vxlan_xmit_skb

int vxlan_xmit_skb(struct vxlan_sock *vs,
		   struct rtable *rt, struct sk_buff *skb,
		   __be32 src, __be32 dst, __u8 tos, __u8 ttl, __be16 df,
		   __be16 src_port, __be16 dst_port,
		   struct vxlan_metadata *md, bool xnet, u32 vxflags)
{
	struct vxlanhdr *vxh;
	int min_headroom;
	int err;
	bool udp_sum = !!(vxflags & VXLAN_F_UDP_CSUM);

	skb = udp_tunnel_handle_offloads(skb, udp_sum, true);
	if (IS_ERR(skb))
		return PTR_ERR(skb);

	min_headroom = LL_RESERVED_SPACE(rt_dst(rt).dev) + rt_dst(rt).header_len
			+ VXLAN_HLEN + sizeof(struct iphdr)
			+ (skb_vlan_tag_present(skb) ? VLAN_HLEN : 0);

	/* Need space for new headers (invalidates iph ptr) */
	err = skb_cow_head(skb, min_headroom);
	if (unlikely(err)) {
		kfree_skb(skb);
		return err;
	}

	skb = vlan_hwaccel_push_inside(skb);
	if (WARN_ON(!skb))
		return -ENOMEM;

	vxh = (struct vxlanhdr *) __skb_push(skb, sizeof(*vxh));
	vxh->vx_flags = htonl(VXLAN_HF_VNI);
	vxh->vx_vni = md->vni;

	if (vxflags & VXLAN_F_GBP)
		vxlan_build_gbp_hdr(vxh, vxflags, md);

	vxlan_set_owner(vs->sock->sk, skb);

	ovs_skb_set_inner_protocol(skb, htons(ETH_P_TEB));

	return udp_tunnel_xmit_skb(rt, skb, src, dst, tos,
				   ttl, df, src_port, dst_port, xnet,
				   !udp_sum);
}

开发者ID:hisaki，项目名称:ovs，代码行数:45，代码来源:vxlan.c

示例20: br_nf_push_frag_xmit

static int br_nf_push_frag_xmit(struct sock *sk, struct sk_buff *skb)
{
    struct brnf_frag_data *data;
    int err;

    data = this_cpu_ptr(&brnf_frag_data_storage);
    err = skb_cow_head(skb, data->size);

    if (err) {
        kfree_skb(skb);
        return 0;
    }

    skb_copy_to_linear_data_offset(skb, -data->size, data->mac, data->size);
    __skb_push(skb, data->encap_size);

    return br_dev_queue_push_xmit(sk, skb);
}

开发者ID:coderkan，项目名称:linux，代码行数:18，代码来源:br_netfilter.c

注：本文中的skb_cow_head函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ skb_dequeue函数代码示例发布时间：2022-05-30

C++ skb_cow函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19135|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ skb_cow_head函数代码示例

示例1: geneve_xmit_skb

示例2: gre_tap_xmit

示例3: i2400m_hard_start_xmit

示例4: xlgmac_prep_tso

示例5: push_eth

示例6: push_mpls

示例7: xfrm6_beet_input

示例8: dsa_slave_to_port

示例9: push_mpls

示例10: push_mpls

示例11: push_mpls

示例12: ipgre_xmit

示例13: rawsock_add_header

示例14: nci_add_rx_data_frag

示例15: vxlan_xmit_skb

示例16: ipgre_xmit

示例17: nf_bridge_copy_header

示例18: nf_bridge_copy_header

示例19: vxlan_xmit_skb

示例20: br_nf_push_frag_xmit

请发表评论

全部评论

上一篇：

下一篇：

Delphi中关于资源释放（Free/release/freeA

bradtraversy/iweather: Ionic 3 mobile we

CVE-2022-34918

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053