• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ sk_wmem_alloc_get函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中sk_wmem_alloc_get函数的典型用法代码示例。如果您正苦于以下问题：C++ sk_wmem_alloc_get函数的具体用法？C++ sk_wmem_alloc_get怎么用？C++ sk_wmem_alloc_get使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了sk_wmem_alloc_get函数的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: raw_ioctl

static int raw_ioctl(struct sock *sk, int cmd, unsigned long arg)
{
	switch (cmd) {
	case SIOCOUTQ: {
		int amount = sk_wmem_alloc_get(sk);

		return put_user(amount, (int __user *)arg);
	}
	case SIOCINQ: {
		struct sk_buff *skb;
		int amount = 0;

		spin_lock_bh(&sk->sk_receive_queue.lock);
		skb = skb_peek(&sk->sk_receive_queue);
		if (skb != NULL)
			amount = skb->len;
		spin_unlock_bh(&sk->sk_receive_queue.lock);
		return put_user(amount, (int __user *)arg);
	}

	default:
#ifdef CONFIG_IP_MROUTE
		return ipmr_ioctl(sk, cmd, (void __user *)arg);
#else
		return -ENOIOCTLCMD;
#endif
	}
}
开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:28，代码来源:raw.c


示例2: sk_atm

static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
{
	struct sk_buff *skb;
	struct sock *sk = sk_atm(vcc);

	if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
		pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
			 sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
		return NULL;
	}
	while (!(skb = alloc_skb(size, GFP_KERNEL)))
		schedule();
	pr_debug("%d += %d\n", sk_wmem_alloc_get(sk), skb->truesize);
	atomic_add(skb->truesize, &sk->sk_wmem_alloc);
	return skb;
}
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:16，代码来源:common.c


示例3: vcc_info

static void vcc_info(struct seq_file *seq, struct atm_vcc *vcc)
{
	struct sock *sk = sk_atm(vcc);

	seq_printf(seq, "%pK ", vcc);
	if (!vcc->dev)
		seq_printf(seq, "Unassigned    ");
	else
		seq_printf(seq, "%3d %3d %5d ", vcc->dev->number, vcc->vpi,
			vcc->vci);
	switch (sk->sk_family) {
	case AF_ATMPVC:
		seq_printf(seq, "PVC");
		break;
	case AF_ATMSVC:
		seq_printf(seq, "SVC");
		break;
	default:
		seq_printf(seq, "%3d", sk->sk_family);
	}
	seq_printf(seq, " %04lx  %5d %7d/%7d %7d/%7d [%d]\n",
		   vcc->flags, sk->sk_err,
		   sk_wmem_alloc_get(sk), sk->sk_sndbuf,
		   sk_rmem_alloc_get(sk), sk->sk_rcvbuf,
		   atomic_read(&sk->sk_refcnt));
}
开发者ID:adyjl，项目名称:DORIMANX_LG_STOCK_LP_KERNEL，代码行数:26，代码来源:proc.c


示例4: x25_seq_socket_show

static int x25_seq_socket_show(struct seq_file *seq, void *v)
{
	struct sock *s;
	struct x25_sock *x25;
	struct net_device *dev;
	const char *devname;

	if (v == SEQ_START_TOKEN) {
		seq_printf(seq, "dest_addr  src_addr   dev   lci st vs vr "
				"va   t  t2 t21 t22 t23 Snd-Q Rcv-Q inode\n");
		goto out;
	}

	s = sk_entry(v);
	x25 = x25_sk(s);

	if (!x25->neighbour || (dev = x25->neighbour->dev) == NULL)
		devname = "???";
	else
		devname = x25->neighbour->dev->name;

	seq_printf(seq, "%-10s %-10s %-5s %3.3X  %d  %d  %d  %d %3lu %3lu "
			"%3lu %3lu %3lu %5d %5d %ld\n",
		   !x25->dest_addr.x25_addr[0] ? "*" : x25->dest_addr.x25_addr,
		   !x25->source_addr.x25_addr[0] ? "*" : x25->source_addr.x25_addr,
		   devname, x25->lci & 0x0FFF, x25->state, x25->vs, x25->vr,
		   x25->va, x25_display_timer(s) / HZ, x25->t2  / HZ,
		   x25->t21 / HZ, x25->t22 / HZ, x25->t23 / HZ,
		   sk_wmem_alloc_get(s),
		   sk_rmem_alloc_get(s),
		   s->sk_socket ? SOCK_INODE(s->sk_socket)->i_ino : 0L);
out:
	return 0;
}
开发者ID:12rafael，项目名称:jellytimekernel，代码行数:34，代码来源:x25_proc.c


示例5: dgram_ioctl

static int dgram_ioctl(struct sock *sk, int cmd, unsigned long arg)
{
	switch (cmd) {
	case SIOCOUTQ:
	{
		int amount = sk_wmem_alloc_get(sk);

		return put_user(amount, (int __user *)arg);
	}

	case SIOCINQ:
	{
		struct sk_buff *skb;
		unsigned long amount;

		amount = 0;
		spin_lock_bh(&sk->sk_receive_queue.lock);
		skb = skb_peek(&sk->sk_receive_queue);
		if (skb != NULL) {
			/* We will only return the amount
			 * of this packet since that is all
			 * that will be read.
			 */
			amount = skb->len - ieee802154_hdr_length(skb);
		}
		spin_unlock_bh(&sk->sk_receive_queue.lock);
		return put_user(amount, (int __user *)arg);
	}
	}

	return -ENOIOCTLCMD;
}
开发者ID:mcellos，项目名称:ath，代码行数:32，代码来源:dgram.c


示例6: atm_pop_raw

static void atm_pop_raw(struct atm_vcc *vcc, struct sk_buff *skb)
{
	struct sock *sk = sk_atm(vcc);

	pr_debug("(%d) %d -= %d\n",
		 vcc->vci, sk_wmem_alloc_get(sk), skb->truesize);
	atomic_sub(skb->truesize, &sk->sk_wmem_alloc);
	dev_kfree_skb_any(skb);
	sk->sk_write_space(sk);
}
开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:10，代码来源:raw.c


示例7: raw_sock_seq_show

static void raw_sock_seq_show(struct seq_file *seq, struct sock *sp, int i)
{
	struct inet_sock *inet = inet_sk(sp);
	__be32 dest = inet->inet_daddr,
	       src = inet->inet_rcv_saddr;
	__u16 destp = 0,
	      srcp  = inet->inet_num;

	seq_printf(seq, "%4d: %08X:%04X %08X:%04X"
		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %pK %d\n",
		i, src, srcp, dest, destp, sp->sk_state,
		sk_wmem_alloc_get(sp),
		sk_rmem_alloc_get(sp),
		0, 0L, 0, sock_i_uid(sp), 0, sock_i_ino(sp),
		atomic_read(&sp->sk_refcnt), sp, atomic_read(&sp->sk_drops));
}
开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:16，代码来源:raw.c


示例8: pn_sock_seq_show

static int pn_sock_seq_show(struct seq_file *seq, void *v)
{
	seq_setwidth(seq, 127);
	if (v == SEQ_START_TOKEN)
		seq_puts(seq, "pt  loc  rem rs st tx_queue rx_queue "
			"  uid inode ref pointer drops");
	else {
		struct sock *sk = v;
		struct pn_sock *pn = pn_sk(sk);

		seq_printf(seq, "%2d %04X:%04X:%02X %02X %08X:%08X %5d %lu "
			"%d %pK %d",
			sk->sk_protocol, pn->sobject, pn->dobject,
			pn->resource, sk->sk_state,
			sk_wmem_alloc_get(sk), sk_rmem_alloc_get(sk),
			from_kuid_munged(seq_user_ns(seq), sock_i_uid(sk)),
			sock_i_ino(sk),
			atomic_read(&sk->sk_refcnt), sk,
			atomic_read(&sk->sk_drops));
	}
	seq_pad(seq, '\n');
	return 0;
}
开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:23，代码来源:socket.c


示例9: inet_sk_diag_fill

int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
		      struct sk_buff *skb, const struct inet_diag_req_v2 *req,
		      struct user_namespace *user_ns,
		      u32 portid, u32 seq, u16 nlmsg_flags,
		      const struct nlmsghdr *unlh)
{
	const struct inet_sock *inet = inet_sk(sk);
	const struct tcp_congestion_ops *ca_ops;
	const struct inet_diag_handler *handler;
	int ext = req->idiag_ext;
	struct inet_diag_msg *r;
	struct nlmsghdr  *nlh;
	struct nlattr *attr;
	void *info = NULL;

	handler = inet_diag_table[req->sdiag_protocol];
	BUG_ON(!handler);

	nlh = nlmsg_put(skb, portid, seq, unlh->nlmsg_type, sizeof(*r),
			nlmsg_flags);
	if (!nlh)
		return -EMSGSIZE;

	r = nlmsg_data(nlh);
	BUG_ON(!sk_fullsock(sk));

	inet_diag_msg_common_fill(r, sk);
	r->idiag_state = sk->sk_state;
	r->idiag_timer = 0;
	r->idiag_retrans = 0;

	if (nla_put_u8(skb, INET_DIAG_SHUTDOWN, sk->sk_shutdown))
		goto errout;

	/* IPv6 dual-stack sockets use inet->tos for IPv4 connections,
	 * hence this needs to be included regardless of socket family.
	 */
	if (ext & (1 << (INET_DIAG_TOS - 1)))
		if (nla_put_u8(skb, INET_DIAG_TOS, inet->tos) < 0)
			goto errout;

#if IS_ENABLED(CONFIG_IPV6)
	if (r->idiag_family == AF_INET6) {
		if (ext & (1 << (INET_DIAG_TCLASS - 1)))
			if (nla_put_u8(skb, INET_DIAG_TCLASS,
				       inet6_sk(sk)->tclass) < 0)
				goto errout;

		if (((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE)) &&
		    nla_put_u8(skb, INET_DIAG_SKV6ONLY, ipv6_only_sock(sk)))
			goto errout;
	}
#endif

	r->idiag_uid = from_kuid_munged(user_ns, sock_i_uid(sk));
	r->idiag_inode = sock_i_ino(sk);

	if (ext & (1 << (INET_DIAG_MEMINFO - 1))) {
		struct inet_diag_meminfo minfo = {
			.idiag_rmem = sk_rmem_alloc_get(sk),
			.idiag_wmem = sk->sk_wmem_queued,
			.idiag_fmem = sk->sk_forward_alloc,
			.idiag_tmem = sk_wmem_alloc_get(sk),
		};

		if (nla_put(skb, INET_DIAG_MEMINFO, sizeof(minfo), &minfo) < 0)
			goto errout;
	}

	if (ext & (1 << (INET_DIAG_SKMEMINFO - 1)))
		if (sock_diag_put_meminfo(sk, skb, INET_DIAG_SKMEMINFO))
			goto errout;

	if (!icsk) {
		handler->idiag_get_info(sk, r, NULL);
		goto out;
	}

#define EXPIRES_IN_MS(tmo)  DIV_ROUND_UP((tmo - jiffies) * 1000, HZ)

	if (icsk->icsk_pending == ICSK_TIME_RETRANS ||
	    icsk->icsk_pending == ICSK_TIME_EARLY_RETRANS ||
	    icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) {
		r->idiag_timer = 1;
		r->idiag_retrans = icsk->icsk_retransmits;
		r->idiag_expires = EXPIRES_IN_MS(icsk->icsk_timeout);
	} else if (icsk->icsk_pending == ICSK_TIME_PROBE0) {
		r->idiag_timer = 4;
		r->idiag_retrans = icsk->icsk_probes_out;
		r->idiag_expires = EXPIRES_IN_MS(icsk->icsk_timeout);
	} else if (timer_pending(&sk->sk_timer)) {
		r->idiag_timer = 2;
		r->idiag_retrans = icsk->icsk_probes_out;
		r->idiag_expires = EXPIRES_IN_MS(sk->sk_timer.expires);
	} else {
		r->idiag_timer = 0;
		r->idiag_expires = 0;
	}
#undef EXPIRES_IN_MS

//.........这里部分代码省略.........
开发者ID:zefie，项目名称:nxt_andx86_kernel，代码行数:101，代码来源:inet_diag.c


示例10: inet_sk_diag_fill

int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
		      struct sk_buff *skb, const struct inet_diag_req_v2 *req,
		      struct user_namespace *user_ns,
		      u32 portid, u32 seq, u16 nlmsg_flags,
		      const struct nlmsghdr *unlh,
		      bool net_admin)
{
	const struct tcp_congestion_ops *ca_ops;
	const struct inet_diag_handler *handler;
	int ext = req->idiag_ext;
	struct inet_diag_msg *r;
	struct nlmsghdr  *nlh;
	struct nlattr *attr;
	void *info = NULL;

	handler = inet_diag_table[req->sdiag_protocol];
	BUG_ON(!handler);

	nlh = nlmsg_put(skb, portid, seq, unlh->nlmsg_type, sizeof(*r),
			nlmsg_flags);
	if (!nlh)
		return -EMSGSIZE;

	r = nlmsg_data(nlh);
	BUG_ON(!sk_fullsock(sk));

	inet_diag_msg_common_fill(r, sk);
	r->idiag_state = sk->sk_state;
	r->idiag_timer = 0;
	r->idiag_retrans = 0;

	if (inet_diag_msg_attrs_fill(sk, skb, r, ext, user_ns, net_admin))
		goto errout;

	if (ext & (1 << (INET_DIAG_MEMINFO - 1))) {
		struct inet_diag_meminfo minfo = {
			.idiag_rmem = sk_rmem_alloc_get(sk),
			.idiag_wmem = sk->sk_wmem_queued,
			.idiag_fmem = sk->sk_forward_alloc,
			.idiag_tmem = sk_wmem_alloc_get(sk),
		};

		if (nla_put(skb, INET_DIAG_MEMINFO, sizeof(minfo), &minfo) < 0)
			goto errout;
	}

	if (ext & (1 << (INET_DIAG_SKMEMINFO - 1)))
		if (sock_diag_put_meminfo(sk, skb, INET_DIAG_SKMEMINFO))
			goto errout;

	/*
	 * RAW sockets might have user-defined protocols assigned,
	 * so report the one supplied on socket creation.
	 */
	if (sk->sk_type == SOCK_RAW) {
		if (nla_put_u8(skb, INET_DIAG_PROTOCOL, sk->sk_protocol))
			goto errout;
	}

	if (!icsk) {
		handler->idiag_get_info(sk, r, NULL);
		goto out;
	}

	if (icsk->icsk_pending == ICSK_TIME_RETRANS ||
	    icsk->icsk_pending == ICSK_TIME_REO_TIMEOUT ||
	    icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) {
		r->idiag_timer = 1;
		r->idiag_retrans = icsk->icsk_retransmits;
		r->idiag_expires =
			jiffies_to_msecs(icsk->icsk_timeout - jiffies);
	} else if (icsk->icsk_pending == ICSK_TIME_PROBE0) {
		r->idiag_timer = 4;
		r->idiag_retrans = icsk->icsk_probes_out;
		r->idiag_expires =
			jiffies_to_msecs(icsk->icsk_timeout - jiffies);
	} else if (timer_pending(&sk->sk_timer)) {
		r->idiag_timer = 2;
		r->idiag_retrans = icsk->icsk_probes_out;
		r->idiag_expires =
			jiffies_to_msecs(sk->sk_timer.expires - jiffies);
	} else {
		r->idiag_timer = 0;
		r->idiag_expires = 0;
	}

	if ((ext & (1 << (INET_DIAG_INFO - 1))) && handler->idiag_info_size) {
		attr = nla_reserve_64bit(skb, INET_DIAG_INFO,
					 handler->idiag_info_size,
					 INET_DIAG_PAD);
		if (!attr)
			goto errout;

		info = nla_data(attr);
	}

	if (ext & (1 << (INET_DIAG_CONG - 1))) {
		int err = 0;

		rcu_read_lock();
//.........这里部分代码省略.........
开发者ID:multipath-tcp，项目名称:mptcp_net-next，代码行数:101，代码来源:inet_diag.c



注：本文中的sk_wmem_alloc_get函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ sk_write函数代码示例发布时间：2022-05-30
下一篇：
C++ sk_void_num函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap