C++ simpleUPnPcommand函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中simpleUPnPcommand函数的典型用法代码示例。如果您正苦于以下问题：C++ simpleUPnPcommand函数的具体用法？C++ simpleUPnPcommand怎么用？C++ simpleUPnPcommand使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了simpleUPnPcommand函数的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: UPNP_GetTotalPacketsReceived

LIBSPEC UNSIGNED_INTEGER
UPNP_GetTotalPacketsReceived(const char * controlURL,
						const char * servicetype)
{
	struct NameValueParserData pdata;
	char * buffer;
	int bufsize;
	unsigned int r = 0;
	char * p;
	if(!(buffer = simpleUPnPcommand(-1, controlURL, servicetype,
	                                "GetTotalPacketsReceived", 0, &bufsize))) {
		return UPNPCOMMAND_HTTP_ERROR;
	}
	ParseNameValue(buffer, bufsize, &pdata);
	/*DisplayNameValueList(buffer, bufsize);*/
	free(buffer); buffer = NULL;
	p = GetValueFromNameValueList(&pdata, "NewTotalPacketsReceived");
	r = my_atoui(p);
	ClearNameValueList(&pdata);
	return r;
}

开发者ID:snarkus，项目名称:flylinkdc-r5xx，代码行数:21，代码来源:upnpcommands.c

示例2: UPNP_GetExternalIPAddress

/* UPNP_GetExternalIPAddress() call the corresponding UPNP method.
 * if the third arg is not null the value is copied to it.
 * at least 16 bytes must be available
 *
 * Return values :
 * 0 : SUCCESS
 * NON ZERO : ERROR Either an UPnP error code or an unknown error.
 *
 * 402 Invalid Args - See UPnP Device Architecture section on Control.
 * 501 Action Failed - See UPnP Device Architecture section on Control.
 */
LIBSPEC int
UPNP_GetExternalIPAddress(const char * controlURL,
                          const char * servicetype,
                          char * extIpAdd)
{
    struct NameValueParserData pdata;
    char * buffer;
    int bufsize;
    char * p;
    int ret = UPNPCOMMAND_UNKNOWN_ERROR;

    if(!extIpAdd || !controlURL || !servicetype)
        return UPNPCOMMAND_INVALID_ARGS;

    if(!(buffer = simpleUPnPcommand(-1, controlURL, servicetype,
                                    "GetExternalIPAddress", 0, &bufsize))) {
        return UPNPCOMMAND_HTTP_ERROR;
    }
    /*DisplayNameValueList(buffer, bufsize);*/
    ParseNameValue(buffer, bufsize, &pdata);
    free(buffer);
    buffer = NULL;
    /*printf("external ip = %s\n", GetValueFromNameValueList(&pdata, "NewExternalIPAddress") );*/
    p = GetValueFromNameValueList(&pdata, "NewExternalIPAddress");
    if(p) {
        strncpy(extIpAdd, p, 16 );
        extIpAdd[15] = '\0';
        ret = UPNPCOMMAND_SUCCESS;
    } else
        extIpAdd[0] = '\0';

    p = GetValueFromNameValueList(&pdata, "errorCode");
    if(p) {
        ret = UPNPCOMMAND_UNKNOWN_ERROR;
        sscanf(p, "%d", &ret);
    }

    ClearNameValueList(&pdata);
    return ret;
}

开发者ID:wdmchaft，项目名称:Psybrus，代码行数:51，代码来源:upnpcommands.c

示例3: UPNP_DeletePortMapping

LIBSPEC int
UPNP_DeletePortMapping(const char * controlURL, const char * servicetype,
                       const char * extPort, const char * proto,
                       const char * remoteHost)
{
	/*struct NameValueParserData pdata;*/
	struct UPNParg * DeletePortMappingArgs;
	char buffer[4096];
	int bufsize = 4096;
	struct NameValueParserData pdata;
	const char * resVal;
	int ret;

	if(!extPort || !proto)
		return UPNPCOMMAND_INVALID_ARGS;

	DeletePortMappingArgs = calloc(4, sizeof(struct UPNParg));
	DeletePortMappingArgs[0].elt = "NewRemoteHost";
	DeletePortMappingArgs[0].val = remoteHost;
	DeletePortMappingArgs[1].elt = "NewExternalPort";
	DeletePortMappingArgs[1].val = extPort;
	DeletePortMappingArgs[2].elt = "NewProtocol";
	DeletePortMappingArgs[2].val = proto;
	simpleUPnPcommand(-1, controlURL, servicetype,
	                  "DeletePortMapping",
					  DeletePortMappingArgs, buffer, &bufsize);
	/*DisplayNameValueList(buffer, bufsize);*/
	ParseNameValue(buffer, bufsize, &pdata);
	resVal = GetValueFromNameValueList(&pdata, "errorCode");
	if(resVal) {
		ret = UPNPCOMMAND_UNKNOWN_ERROR;
		sscanf(resVal, "%d", &ret);
	} else {
		ret = UPNPCOMMAND_SUCCESS;
	}
	ClearNameValueList(&pdata);
	free(DeletePortMappingArgs);
	return ret;
}

开发者ID:ProfDrLuigi，项目名称:wired，代码行数:39，代码来源:upnpcommands.c

示例4: UPNP_GetPortMappingNumberOfEntries

LIBSPEC int
UPNP_GetPortMappingNumberOfEntries(const char * controlURL,
                                   const char * servicetype,
                                   unsigned int * numEntries)
{
    struct NameValueParserData pdata;
    char * buffer;
    int bufsize;
    char* p;
    int ret = UPNPCOMMAND_UNKNOWN_ERROR;
    if(!(buffer = simpleUPnPcommand(-1, controlURL, servicetype,
                                    "GetPortMappingNumberOfEntries", 0,
                                    &bufsize))) {
        return UPNPCOMMAND_HTTP_ERROR;
    }
#ifdef DEBUG
    DisplayNameValueList(buffer, bufsize);
#endif
    ParseNameValue(buffer, bufsize, &pdata);
    free(buffer);
    buffer = NULL;

    p = GetValueFromNameValueList(&pdata, "NewPortMappingNumberOfEntries");
    if(numEntries && p) {
        *numEntries = 0;
        sscanf(p, "%u", numEntries);
        ret = UPNPCOMMAND_SUCCESS;
    }

    p = GetValueFromNameValueList(&pdata, "errorCode");
    if(p) {
        ret = UPNPCOMMAND_UNKNOWN_ERROR;
        sscanf(p, "%d", &ret);
    }

    ClearNameValueList(&pdata);
    return ret;
}

开发者ID:wdmchaft，项目名称:Psybrus，代码行数:38，代码来源:upnpcommands.c

示例5: UPNP_GetConnectionTypeInfo

/* UPNP_GetConnectionTypeInfo() call the corresponding UPNP method
 * returns the connection type */
LIBSPEC int
UPNP_GetConnectionTypeInfo(const char * controlURL,
                           const char * servicetype,
                           char * connectionType)
{
    struct NameValueParserData pdata;
    char * buffer;
    int bufsize;
    char * p;
    int ret = UPNPCOMMAND_UNKNOWN_ERROR;

    if(!connectionType)
        return UPNPCOMMAND_INVALID_ARGS;

    if(!(buffer = simpleUPnPcommand(-1, controlURL, servicetype,
                                    "GetConnectionTypeInfo", 0, &bufsize))) {
        return UPNPCOMMAND_HTTP_ERROR;
    }
    ParseNameValue(buffer, bufsize, &pdata);
    free(buffer);
    buffer = NULL;
    p = GetValueFromNameValueList(&pdata, "NewConnectionType");
    /*p = GetValueFromNameValueList(&pdata, "NewPossibleConnectionTypes");*/
    /* PossibleConnectionTypes will have several values.... */
    if(p) {
        strncpy(connectionType, p, 64 );
        connectionType[63] = '\0';
        ret = UPNPCOMMAND_SUCCESS;
    } else
        connectionType[0] = '\0';
    p = GetValueFromNameValueList(&pdata, "errorCode");
    if(p) {
        ret = UPNPCOMMAND_UNKNOWN_ERROR;
        sscanf(p, "%d", &ret);
    }
    ClearNameValueList(&pdata);
    return ret;
}

开发者ID:wdmchaft，项目名称:Psybrus，代码行数:40，代码来源:upnpcommands.c

示例6: UPNP_GetStatusInfo

/* UPNP_GetStatusInfo() call the corresponding UPNP method
 * returns the current status and uptime */
void UPNP_GetStatusInfo(const char * controlURL,
												const char * servicetype,
												char * status, 
												unsigned int * uptime)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	char * p;
	char* up;

	if(!status && !uptime)
		return;

	simpleUPnPcommand(-1, controlURL, servicetype, "GetStatusInfo", 0, buffer, &bufsize);
	ParseNameValue(buffer, bufsize, &pdata);
	/*DisplayNameValueList(buffer, bufsize);*/
	up = GetValueFromNameValueList(&pdata, "NewUptime");
	p = GetValueFromNameValueList(&pdata, "NewConnectionStatus");

	if(status)
	{
		if(p){
			strncpy(status, p, 64 );
			status[63] = '\0';
		}else
			status[0]= '\0';
	}

	if(uptime){
		if(p)
			sscanf(up,"%u",uptime);
		else
			uptime = 0;
	}

	ClearNameValueList(&pdata);
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:40，代码来源:upnpcommands.c

示例7: UPNP_DeletePortMapping

void UPNP_DeletePortMapping(const char * controlURL, const char * servicetype,
                            const char * extPort, const char * proto)
{
	/*struct NameValueParserData pdata;*/
	struct UPNParg * DeletePortMappingArgs;
	char buffer[4096];
	int bufsize = 4096;

	if(!extPort)
		return;	

	DeletePortMappingArgs = calloc(4, sizeof(struct UPNParg));
	DeletePortMappingArgs[0].elt = "NewRemoteHost";
	DeletePortMappingArgs[1].elt = "NewExternalPort";
	DeletePortMappingArgs[1].val = extPort;
	DeletePortMappingArgs[2].elt = "NewProtocol";
	DeletePortMappingArgs[2].val = proto;
	simpleUPnPcommand(-1, controlURL, servicetype,
	                  "DeletePortMapping",
					  DeletePortMappingArgs, buffer, &bufsize);
	/*DisplayNameValueList(buffer, bufsize);*/
	free(DeletePortMappingArgs);
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:23，代码来源:upnpcommands.c

示例8: UPNP_AddPortMapping

LIBSPEC int
UPNP_AddPortMapping(const char * controlURL, const char * servicetype,
                    const char * extPort,
                    const char * inPort,
                    const char * inClient,
                    const char * desc,
                    const char * proto,
                    const char * remoteHost,
                    const char * leaseDuration)
{
    struct UPNParg * AddPortMappingArgs;
    char * buffer;
    int bufsize;
    struct NameValueParserData pdata;
    const char * resVal;
    int ret;

    if(!inPort || !inClient || !proto || !extPort)
        return UPNPCOMMAND_INVALID_ARGS;

    AddPortMappingArgs = calloc(9, sizeof(struct UPNParg));
    AddPortMappingArgs[0].elt = "NewRemoteHost";
    AddPortMappingArgs[0].val = remoteHost;
    AddPortMappingArgs[1].elt = "NewExternalPort";
    AddPortMappingArgs[1].val = extPort;
    AddPortMappingArgs[2].elt = "NewProtocol";
    AddPortMappingArgs[2].val = proto;
    AddPortMappingArgs[3].elt = "NewInternalPort";
    AddPortMappingArgs[3].val = inPort;
    AddPortMappingArgs[4].elt = "NewInternalClient";
    AddPortMappingArgs[4].val = inClient;
    AddPortMappingArgs[5].elt = "NewEnabled";
    AddPortMappingArgs[5].val = "1";
    AddPortMappingArgs[6].elt = "NewPortMappingDescription";
    AddPortMappingArgs[6].val = desc?desc:"libminiupnpc";
    AddPortMappingArgs[7].elt = "NewLeaseDuration";
    AddPortMappingArgs[7].val = leaseDuration?leaseDuration:"0";
    if(!(buffer = simpleUPnPcommand(-1, controlURL, servicetype,
                                    "AddPortMapping", AddPortMappingArgs,
                                    &bufsize))) {
        free(AddPortMappingArgs);
        return UPNPCOMMAND_HTTP_ERROR;
    }
    /*DisplayNameValueList(buffer, bufsize);*/
    /*buffer[bufsize] = '\0';*/
    /*puts(buffer);*/
    ParseNameValue(buffer, bufsize, &pdata);
    free(buffer);
    buffer = NULL;
    resVal = GetValueFromNameValueList(&pdata, "errorCode");
    if(resVal) {
        /*printf("AddPortMapping errorCode = '%s'\n", resVal); */
        ret = UPNPCOMMAND_UNKNOWN_ERROR;
        sscanf(resVal, "%d", &ret);
    } else {
        ret = UPNPCOMMAND_SUCCESS;
    }
    ClearNameValueList(&pdata);
    free(AddPortMappingArgs);
    return ret;
}

开发者ID:wdmchaft，项目名称:Psybrus，代码行数:61，代码来源:upnpcommands.c

示例9: UPNP_GetGenericPortMappingEntry

int UPNP_GetGenericPortMappingEntry(const char * controlURL,
                                     const char * servicetype,
									 const char * index,
									 char * extPort,
									 char * intClient,
									 char * intPort,
									 char * protocol,
									 char * desc,
									 char * enabled,
									 char * rHost,
									 char * duration)
{
	struct NameValueParserData pdata;
	struct UPNParg * GetPortMappingArgs;
	char buffer[4096];
	int bufsize = 4096;
	char * p;
	int r = -1;
	intClient[0] = '\0';
	intPort[0] = '\0';
	GetPortMappingArgs = calloc(2, sizeof(struct UPNParg));
	GetPortMappingArgs[0].elt = "NewPortMappingIndex";
	GetPortMappingArgs[0].val = index;
	simpleUPnPcommand(-1, controlURL, servicetype,
	                  "GetGenericPortMappingEntry",
					  GetPortMappingArgs, buffer, &bufsize);
	ParseNameValue(buffer, bufsize, &pdata);
	p = GetValueFromNameValueList(&pdata, "NewRemoteHost");
	if(p && rHost)
	{
		strncpy(rHost, p, 64);
		rHost[63] = '\0';
	}
	p = GetValueFromNameValueList(&pdata, "NewExternalPort");
	if(p && extPort)
	{
		strncpy(extPort, p, 6);
		extPort[5] = '\0';
		r = 0;
	}
	p = GetValueFromNameValueList(&pdata, "NewProtocol");
	if(p && protocol)
	{
		strncpy(protocol, p, 4);
		protocol[3] = '\0';
	}
	p = GetValueFromNameValueList(&pdata, "NewInternalClient");
	if(p && intClient)
	{
		strncpy(intClient, p, 16);
		intClient[15] = '\0';
		r = 0;
	}
	p = GetValueFromNameValueList(&pdata, "NewInternalPort");
	if(p && intPort)
	{
		strncpy(intPort, p, 6);
		intPort[5] = '\0';
	}
	p = GetValueFromNameValueList(&pdata, "NewEnabled");
	if(p && enabled)
	{
		strncpy(enabled, p, 4);
		enabled[3] = '\0';
	}
	p = GetValueFromNameValueList(&pdata, "NewPortMappingDescription");
	if(p && desc)
	{
		strncpy(desc, p, 80);
		desc[79] = '\0';
	}
	p = GetValueFromNameValueList(&pdata, "NewLeaseDuration");
	if(p && duration)
	{
		strncpy(duration, p, 16);
		duration[15] = '\0';
	}
	ClearNameValueList(&pdata);
	free(GetPortMappingArgs);
	return r;
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:81，代码来源:upnpcommands.c

注：本文中的simpleUPnPcommand函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ simple_command函数代码示例发布时间：2022-05-30

C++ simd_oprsz函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19137|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ simpleUPnPcommand函数代码示例

示例1: UPNP_GetTotalPacketsReceived

示例2: UPNP_GetExternalIPAddress

示例3: UPNP_DeletePortMapping

示例4: UPNP_GetPortMappingNumberOfEntries

示例5: UPNP_GetConnectionTypeInfo

示例6: UPNP_GetStatusInfo

示例7: UPNP_DeletePortMapping

示例8: UPNP_AddPortMapping

示例9: UPNP_GetGenericPortMappingEntry

请发表评论

全部评论

上一篇：

下一篇：

bluegill/katana:

OpenNBS/OpenNoteBlockStudio: An open-sou

juleswhite/mobilecloud-15: Programming C

CVE-2022-22205

JunichiT/JTMaterialSwitch: A Customizabl

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053