本文整理汇总了C++中showmsg函数的典型用法代码示例。如果您正苦于以下问题:C++ showmsg函数的具体用法?C++ showmsg怎么用?C++ showmsg使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了showmsg函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: test_local
/* test local file -----------------------------------------------------------*/
static int test_local(gtime_t ts, gtime_t te, double ti, const char *path,
const char *sta, const char *dir, int *nc, int *nt,
FILE *fp)
{
gtime_t time;
char remot[1024],remot_p[1024],dir_t[1024],local[1024],str[1024];
int stat,abort=0;
for (time=ts;timediff(time,te)<=1E-3;time=timeadd(time,ti)) {
sprintf(str,"%s->%s",path,local);
if (showmsg(str)) {
abort=1;
break;
}
genpath(path,sta,time,0,remot);
genpath(dir ,sta,time,0,dir_t);
remot2local(remot,dir_t,local);
stat=test_file(local);
fprintf(fp," %s",stat==0?"-":(stat==1?"o":"z"));
showmsg("STAT=%s",stat==0?"x":(stat==1?"o":"z"));
(*nt)++; if (stat) (*nc)++;
}
fprintf(fp,"\n");
return abort;
}
开发者ID:Andreas-Krimbacher,项目名称:rtklib,代码行数:32,代码来源:download.c
示例2: lookup_keys
/** lookup all needed special keys not defined by ncurses */
void lookup_keys() {
int not_ok = 0;
key_kNXT3 = lookup_key("kNXT3");
key_kPRV3 = lookup_key("kPRV3");
key_kNXT5 = lookup_key("kNXT5");
key_kPRV5 = lookup_key("kPRV5");
if ((key_kNXT3 || key_kPRV3) == 0) {
showmsg("Terminal does not support Alt-PgUp/PgDn keys");
not_ok = 1;
}
if ((key_kNXT5 || key_kPRV5) == 0) {
showmsg("Terminal does not support Ctrl-PgUp/PgDn keys");
not_ok = 1;
}
if (not_ok == 1) {
showmsg("See ':CQD' in man page for setting Auto_CQ delay");
showmsg("");
beep();
sleep(2);
}
}
开发者ID:wildj79,项目名称:tlf,代码行数:26,代码来源:ui_utils.c
示例3: hamlib_init
void hamlib_init() {
int status;
if (no_trx_control == 1) {
trx_control = 0;
}
if (trx_control != 0) {
shownr("Rignumber is", (int) myrig_model);
shownr("Rig speed is", serial_rate);
showmsg("Trying to start rig ctrl");
status = init_tlf_rig();
if (status != 0) {
showmsg("Continue without rig control Y/(N)?");
if (toupper(key_get()) != 'Y') {
endwin();
exit(1);
}
trx_control = 0;
showmsg("Disabling rig control!");
sleep(1);
}
}
}
开发者ID:airween,项目名称:tlf,代码行数:29,代码来源:main.c
示例4: read_logcfg
int read_logcfg(void)
{
extern int nodes;
extern int node;
extern char *config_file;
char defltconf[80];
int status = PARSE_OK;
contest = 0;
partials = 0;
use_part = 0;
keyerport = 0;
portnum = 0;
packetinterface = 0;
tncport = 0;
nodes = 0;
node = 0;
shortqsonr = 0;
if (cabrillo != NULL) {
free(cabrillo);
cabrillo = NULL;
}
strcpy(defltconf, PACKAGE_DATA_DIR);
strcat(defltconf, "/logcfg.dat");
if (config_file == NULL)
config_file = g_strdup("logcfg.dat");
if ((fp = fopen(config_file, "r")) == NULL) {
if ((fp = fopen(defltconf, "r")) == NULL) {
showmsg("Error opening logcfg.dat file.");
showmsg("Exiting...");
sleep(5);
endwin();
exit(1);
} else {
showstring("Using (Read Only) file", defltconf);
}
} else
showstring("Opening config file", config_file);
while ( fgets(inputbuffer, 120, fp) != NULL ) {
if ((inputbuffer[0] != '#') && (strlen(inputbuffer) > 1)) {
/* skip comments and
* empty lines */
status |= parse_logcfg(inputbuffer);
}
}
fclose(fp);
return( status );
}
开发者ID:patlc,项目名称:tlf,代码行数:59,代码来源:parse_logcfg.c
示例5: dl_exec
/* execute download ------------------------------------------------------------
* execute download
* args : gtime_t ts,te I time start and end
* double tint I time interval (s)
* int seqnos I sequence number start
* int seqnoe I sequence number end
* url_t *urls I url address list
* int nurl I number of urls
* char **stas I station list
* int nsta I number of stations
* char *dir I local directory
* char *remote_p I previous remote file path
* char *usr I login user for ftp
* char *pwd I login password for ftp
* char *proxy I proxy server address
* int opts I download options (or of the followings)
* DLOPT_FORCE = force download existing file
* DLOPT_KEEPCMP=keep compressed file
* DLOPT_HOLDERR=hold on error file
* DLOPT_HOLDLST=hold on listing file
* char *msg O output messages
* FILE *fp IO log file pointer (NULL: no output log)
* return : status (1:ok,0:error,-1:aborted)
* notes : urls should be read by using dl_readurl()
*-----------------------------------------------------------------------------*/
extern int dl_exec(gtime_t ts, gtime_t te, double ti, int seqnos, int seqnoe,
const url_t *urls, int nurl, char **stas, int nsta,
const char *dir, const char *usr, const char *pwd,
const char *proxy, int opts, char *msg, FILE *fp)
{
paths_t paths={0};
gtime_t ts_p={0};
char str[2048],remot_p[1024]="";
int i,n[4]={0};
unsigned int tick=tickget();
showmsg("STAT=_");
/* generate download paths */
while (timediff(ts,te)<1E-3) {
for (i=0;i<nurl;i++) {
if (!gen_paths(ts,ts_p,seqnos,seqnoe,urls+i,stas,nsta,dir,&paths)) {
free_path(&paths);
return 0;
}
}
ts_p=ts; ts=timeadd(ts,ti);
}
/* compact download paths */
compact_paths(&paths);
if (paths.n<=0) {
sprintf(msg,"no download data");
return 0;
}
for (i=0;i<paths.n;i++) {
sprintf(str,"%s->%s (%d/%d)",paths.path[i].remot,paths.path[i].local,i+1,
paths.n);
if (showmsg(str)) break;
/* execute download */
if (exec_down(paths.path+i,remot_p,usr,pwd,proxy,opts,n,fp)) {
break;
}
}
if (!(opts&DLOPT_HOLDLST)) {
remove(FTP_LISTING);
}
sprintf(msg,"OK=%d No_File=%d Skip=%d Error=%d (Time=%.1f s)",n[0],n[1],n[2],
n[3],(tickget()-tick)*0.001);
free_path(&paths);
return 1;
}
开发者ID:Andreas-Krimbacher,项目名称:rtklib,代码行数:77,代码来源:download.c
示例6: checkbrk
/* show message and check break ----------------------------------------------*/
static int checkbrk(const char *format, ...)
{
va_list arg;
char buff[1024],*p=buff;
if (!*format) return showmsg("");
va_start(arg,format);
p+=vsprintf(p,format,arg);
va_end(arg);
if (*proc_rov&&*proc_base) sprintf(p," (%s-%s)",proc_rov,proc_base);
else if (*proc_rov ) sprintf(p," (%s)",proc_rov );
else if (*proc_base) sprintf(p," (%s)",proc_base);
return showmsg(buff);
}
开发者ID:idaohang,项目名称:rtk-streamserver,代码行数:14,代码来源:postpos.c
示例7: lan_init
void lan_init() {
if (lan_active == 1) {
if (lanrecv_init() < 0) /* set up the network */
showmsg("LAN receive init failed");
else
showmsg("LAN receive initialized");
if (lan_send_init() < 0)
showmsg("LAN send init failed");
else
showmsg("LAN send initialized");
}
}
开发者ID:airween,项目名称:tlf,代码行数:13,代码来源:main.c
示例8: openses
/* open procssing session ----------------------------------------------------*/
static int openses(const prcopt_t *popt, const solopt_t *sopt,
const filopt_t *fopt, nav_t *nav, pcvs_t *pcvs, pcvs_t *pcvr)
{
char *ext;
trace(3,"openses :\n");
/* read satellite antenna parameters */
if (*fopt->satantp&&!(readpcv(fopt->satantp,pcvs))) {
showmsg("error : no sat ant pcv in %s",fopt->satantp);
trace(1,"sat antenna pcv read error: %s\n",fopt->satantp);
return 0;
}
/* read receiver antenna parameters */
if (*fopt->rcvantp&&!(readpcv(fopt->rcvantp,pcvr))) {
showmsg("error : no rec ant pcv in %s",fopt->rcvantp);
trace(1,"rec antenna pcv read error: %s\n",fopt->rcvantp);
return 0;
}
/* read dcb parameters */
if (*fopt->dcb) {
readdcb(fopt->dcb,nav);
}
/* read ionosphere data file */
if (*fopt->iono&&(ext=strrchr(fopt->iono,'.'))) {
if (strlen(ext)==4&&(ext[3]=='i'||ext[3]=='I')) {
readtec(fopt->iono,nav,0);
}
#ifdef EXTSTEC
else if (!strcmp(ext,".stec")||!strcmp(ext,".STEC")) {
stec_read(fopt->iono,nav);
}
#endif
}
/* open geoid data */
if (sopt->geoid>0&&*fopt->geoid) {
if (!opengeoid(sopt->geoid,fopt->geoid)) {
showmsg("error : no geoid data %s",fopt->geoid);
trace(2,"no geoid data %s\n",fopt->geoid);
}
}
/* read erp data */
if (*fopt->eop) {
if (!readerp(fopt->eop,&nav->erp)) {
showmsg("error : no erp data %s",fopt->eop);
trace(2,"no erp data %s\n",fopt->eop);
}
}
return 1;
}
开发者ID:idaohang,项目名称:rtk-streamserver,代码行数:51,代码来源:postpos.c
示例9: showstat
/* show status message -------------------------------------------------------*/
static int showstat(int sess, gtime_t ts, gtime_t te, int *n)
{
const char type[]="ONGHQLSE";
char msg[1024]="",*p=msg,s[64];
int i;
if (sess>0) {
p+=sprintf(p,"(%d) ",sess);
}
if (ts.time!=0) {
time2str(ts,s,0);
p+=sprintf(p,"%s",s);
}
if (te.time!=0&&timediff(te,ts)>0.9) {
time2str(te,s,0);
p+=sprintf(p,"-%s",s+5);
}
p+=sprintf(p,": ");
for (i=0;i<NOUTFILE+1;i++) {
if (n[i]==0) continue;
p+=sprintf(p,"%c=%d%s",type[i],n[i],i<NOUTFILE?" ":"");
}
return showmsg(msg);
}
开发者ID:idaohang,项目名称:rtk-streamserver,代码行数:26,代码来源:convrnx.c
示例10: describekeybriefly
int
describekeybriefly(UNUSED(char **args))
{
char *seq, *str, *msg, *is;
Thingy func;
if (statusline)
return 1;
clearlist = 1;
statusline = "Describe key briefly: _";
zrefresh();
seq = getkeymapcmd(curkeymap, &func, &str);
statusline = NULL;
if(!*seq)
return 1;
msg = bindztrdup(seq);
msg = appstr(msg, " is ");
if (!func)
is = bindztrdup(str);
else
is = nicedup(func->nam, 0);
msg = appstr(msg, is);
zsfree(is);
showmsg(msg);
zsfree(msg);
return 0;
}
开发者ID:xyzy,项目名称:mips-zsh_5.2,代码行数:27,代码来源:zle_main.c
示例11: Complain
/** Complain about problems in configuration
*
* Complains in standout mode about some problem. Beep and wait for
* 2 seconds
*
* \param msg The reason for the problem to be shown
*/
void Complain(char *msg) {
attron(A_STANDOUT);
showmsg(msg);
attroff(A_STANDOUT);
confirmation_needed = PARSE_CONFIRM;
beep();
}
开发者ID:patlc,项目名称:tlf,代码行数:14,代码来源:parse_logcfg.c
示例12: ParseReturnErrorComponent
int
ParseReturnErrorComponent(struct Aoc *chanp, u_char *p, u_char *end, int dummy)
{
int invokeId;
int errorValue;
char error[80];
INIT;
XSEQUENCE_1(ParseInvokeId, ASN1_TAG_INTEGER, ASN1_NOT_TAGGED, &invokeId);
XSEQUENCE_1(ParseErrorValue, ASN1_TAG_INTEGER, ASN1_NOT_TAGGED, &errorValue);
switch (errorValue) {
case 0: sprintf(error, "not subscribed"); break;
case 3: sprintf(error, "not available"); break;
case 4: sprintf(error, "not implemented"); break;
case 6: sprintf(error, "invalid served user nr"); break;
case 7: sprintf(error, "invalid call state"); break;
case 8: sprintf(error, "basic service not provided"); break;
case 9: sprintf(error, "not incoming call"); break;
case 10: sprintf(error, "supplementary service interaction not allowed"); break;
case 11: sprintf(error, "resource unavailable"); break;
case 12: sprintf(error, "invalid diverted-to nr"); break;
case 14: sprintf(error, "special service nr"); break;
case 15: sprintf(error, "diversion to served user nr"); break;
case 23: sprintf(error, "incoming call accepted"); break;
case 24: sprintf(error, "number of diversions exceeded"); break;
case 46: sprintf(error, "not activated"); break;
case 48: sprintf(error, "request already accepted"); break;
default: sprintf(error, "(%d)", errorValue); break;
}
showmsg("ReturnError: %s\n", error);
return p - beg;
}
开发者ID:marschap,项目名称:isdn4k-utils,代码行数:34,代码来源:asn1_comp.c
示例13: convrnx
/* rinex converter -------------------------------------------------------------
* convert receiver log file to rinex obs/nav, sbas log files
* args : int format I receiver raw format (STRFMT_???)
* rnxopt_t *opt IO rinex options (see below)
* char *file I rtcm, receiver raw or rinex file
* (wild-cards (*) are expanded)
* char **ofile IO output files
* ofile[0] rinex obs file ("": no output)
* ofile[1] rinex nav file ("": no output)
* ofile[2] rinex gnav file ("": no output)
* ofile[3] rinex hnav file ("": no output)
* ofile[4] rinex qnav file ("": no output)
* ofile[5] rinex lnav file ("": no output)
* ofile[6] sbas/lex log file("": no output)
* return : status (1:ok,0:error,-1:abort)
* notes : the following members of opt are replaced by information in last
* converted rinex: opt->tstart, opt->tend, opt->obstype, opt->nobs
* keywords in ofile[] are replaced by first obs date/time and station
* id (%r)
* the order of wild-card expanded files must be in-order by time
*-----------------------------------------------------------------------------*/
extern int convrnx(int format, rnxopt_t *opt, const char *file, char **ofile)
{
gtime_t t0={0};
rnxopt_t opt_=*opt;
double tu,ts;
int i,week,stat=1;
trace(3,"convrnx: format=%d file=%s ofile=%s %s %s %s %s %s %s\n",
format,file,ofile[0],ofile[1],ofile[2],ofile[3],ofile[4],ofile[5],
ofile[6]);
showmsg("");
if (opt->ts.time==0||opt->te.time==0||opt->tunit<=0.0) {
/* single-session */
opt_.tstart=opt_.tend=t0;
stat=convrnx_s(0,format,&opt_,file,ofile);
}
else if (timediff(opt->ts,opt->te)<=0.0) {
/* multiple-session */
tu=opt->tunit<86400.0?opt->tunit:86400.0;
ts=tu*(int)floor(time2gpst(opt->ts,&week)/tu);
for (i=0;;i++) { /* for each session */
opt_.ts=gpst2time(week,ts+i*tu);
opt_.te=timeadd(opt_.ts,tu-DTTOL-0.001);
opt_.trtcm=timeadd(opt->trtcm,timediff(opt_.ts,opt->ts));
if (timediff(opt_.ts,opt->te)>0.0) break;
if (timediff(opt_.ts,opt->ts)<0.0) opt_.ts=opt->ts;
if (timediff(opt_.te,opt->te)>0.0) opt_.te=opt->te;
opt_.tstart=opt_.tend=t0;
if ((stat=convrnx_s(i+1,format,&opt_,file,ofile))<0) break;
}
}
else {
showmsg("no period");
return 0;
}
/* output start/end time */
opt->tstart=opt_.tstart; opt->tend=opt_.tend;
return stat;
}
开发者ID:HoughtonAssoc,项目名称:rtklib-mops,代码行数:67,代码来源:convrnx.c
示例14: repair_log
/** Repair log file
*
* Try to repair log file if some limes are too short.
* Same is used to convert old logfile format v1 to new v2
*
* \return 0 on success
*/
int repair_log(char *filename) {
gchar *backupfile;
gchar *cmd;
char buffer[200];
gchar *fill;
int rc;
FILE *infp;
FILE *outfp;
/* make a backup of the original file */
backupfile = g_strconcat(filename, ".bak", NULL);
showstring ( "Backing up original file as: ", backupfile);
cmd = g_strconcat("cp ", filename, " ", backupfile, NULL);
rc = system(cmd);
g_free(cmd);
showmsg( "Converting file to new format");
infp = fopen(backupfile, "r");
outfp = fopen(filename, "w");
while (fgets(buffer, sizeof(buffer), infp)) {
/* strip trailing whitespace (and newline) */
g_strchomp(buffer);
/* append spaces */
fill = g_strnfill( (LOGLINELEN-1) - strlen(buffer), ' ' );
strcat(buffer, fill);
g_free(fill);
fputs(buffer, outfp);
fputs("\n", outfp);
}
fclose(outfp);
fclose(infp);
g_free(backupfile);
showmsg( "Done" );
sleep(2);
return 0;
}
开发者ID:patlc,项目名称:tlf,代码行数:53,代码来源:checklogfile.c
示例15: keyer_init
void keyer_init() {
char keyerbuff[3];
if (cwkeyer == NET_KEYER) {
showmsg("CW-Keyer is cwdaemon");
if (netkeyer_init() < 0) {
showmsg("Cannot open NET keyer daemon ");
refreshp();
sleep(1);
} else {
netkeyer(K_RESET, "0");
sprintf(weightbuf, "%d", weight);
write_tone();
snprintf(keyerbuff, 3, "%2d", GetCWSpeed());
netkeyer(K_SPEED, keyerbuff); // set speed
netkeyer(K_WEIGHT, weightbuf); // set weight
if (*keyer_device != '\0')
netkeyer(K_DEVICE, keyer_device); // set device
sprintf(keyerbuff, "%d", txdelay);
netkeyer(K_TOD, keyerbuff); // set TOD
if (sc_sidetone != 0) // set soundcard output
netkeyer(K_SIDETONE, "");
if (*sc_volume != '\0') // set soundcard volume
netkeyer(K_STVOLUME, sc_volume);
}
}
if (cwkeyer == MFJ1278_KEYER || digikeyer == MFJ1278_KEYER ||
digikeyer == GMFSK) {
init_controller();
}
}
开发者ID:airween,项目名称:tlf,代码行数:44,代码来源:main.c
示例16: trace
/* generate stream file ------------------------------------------------------*/
static strfile_t *gen_strfile(int format, const char *opt, gtime_t time)
{
strfile_t *str;
trace(3,"init_strfile:\n");
if (!(str=(strfile_t *)malloc(sizeof(strfile_t)))) return NULL;
if (format==STRFMT_RTCM2||format==STRFMT_RTCM3) {
if (!init_rtcm(&str->rtcm)) {
showmsg("init rtcm error");
return 0;
}
str->rtcm.time=time;
str->obs=&str->rtcm.obs;
str->nav=&str->rtcm.nav;
strcpy(str->rtcm.opt,opt);
}
else if (format<=MAXRCVFMT) {
if (!init_raw(&str->raw)) {
showmsg("init raw error");
return 0;
}
str->raw.time=time;
str->obs=&str->raw.obs;
str->nav=&str->raw.nav;
str->pvt=&str->raw.pvt;
strcpy(str->raw.opt,opt);
}
else if (format==STRFMT_RINEX) {
if (!init_rnxctr(&str->rnx)) {
showmsg("init rnx error");
return 0;
}
str->obs=&str->rnx.obs;
str->nav=&str->rnx.nav;
strcpy(str->rnx.opt,opt);
}
str->format=format;
str->sat=0;
str->fp=NULL;
str->time=time;
return str;
}
开发者ID:REC-SPb-ETU,项目名称:RTKLIB,代码行数:45,代码来源:convrnx.c
示例17: mgv_unmangle
/*
* Uncompress a file and return the new file name, if the file doesn't
* appear to be compressed or the uncompression fails, the original
* file name will be returned. In all cases, the return value is
* allocated with XtNewString().
*
* We use "system()" in here to avoid the hassle of converting the
* decompression commands from strings to argv's but this means that
* some kludging is needed to grab the error output. This would be
* "cleaner" (in some sense) if pipe/dup2/fork/exec/XtAppAddInput
* were used instead but sometimes laziness is good.
*/
char *
mgv_unmangle(MGV *m, char *file)
{
# define CMD_FMT "%s <%s >%s 2>%s"
char *cmd, *out, *tmp, *s;
int t, cmd_size;
MGV_APP *r = mgv_appres(m->main);
if((t = filetype(file)) == FT_NORM
|| (tempdir == NULL && !mk_tmp(r->temp_dir)))
return XtNewString(file);
if((s = strrchr(file, '/')) == NULL)
s = file;
else
++s;
out = XtCalloc(strlen(tempdir) + 1 + strlen(s) + 1 + 64 + 1, 1);
tmp = XtCalloc(strlen(tempdir) + 1 + 64 + 1 + 1, 1);
sprintf(out, "%s/%s.%ld.%d", tempdir, s,
(long)XtWindow(m->main), m->inst_num);
sprintf(tmp, "%s/%ld.%d", tempdir, (long)getpid(), m->inst_num);
cmd_size = strlen(file) + strlen(out) + strlen(tmp) + sizeof(CMD_FMT);
switch(t) {
case FT_GZIP:
cmd = XtCalloc(cmd_size + strlen(r->gunzip), 1);
sprintf(cmd, "%s <%s >%s 2>%s", r->gunzip, file, out, tmp);
break;
case FT_BZIP:
cmd = XtCalloc(cmd_size + strlen(r->bunzip), 1);
sprintf(cmd, "%s <%s >%s 2>%s", r->bunzip, file, out, tmp);
break;
default:
assert("mgv_unmangle(): confused by file type!" != NULL);
XtFree(out);
XtFree(tmp);
return XtNewString(file);
break;
}
errno = 0;
if(system(cmd) != 0 && errno != 0) {
XtFree(out);
out = XtNewString(file);
}
showmsg(m, file, &tmp[0]);
XtFree(tmp);
XtFree(cmd);
return out;
# undef CMD_FMT
}
开发者ID:idunham,项目名称:dtextra,代码行数:68,代码来源:unmangle.c
示例18: readpreceph
/* read prec ephemeris, sbas data, lex data, tec grid and open rtcm ----------*/
static void readpreceph(char **infile, int n, const prcopt_t *prcopt,
nav_t *nav, sbs_t *sbs, lex_t *lex)
{
seph_t seph0={0};
int i;
char *ext;
trace(3,"readpreceph: n=%d\n",n);
nav->ne=nav->nemax=0;
nav->nc=nav->ncmax=0;
sbs->n =sbs->nmax =0;
lex->n =lex->nmax =0;
/* read precise ephemeris files */
for (i=0;i<n;i++) {
if (strstr(infile[i],"%r")||strstr(infile[i],"%b")) continue;
readsp3(infile[i],nav,0);
}
/* read precise clock files */
for (i=0;i<n;i++) {
if (strstr(infile[i],"%r")||strstr(infile[i],"%b")) continue;
readrnxc(infile[i],nav);
}
/* read sbas message files */
for (i=0;i<n;i++) {
if (strstr(infile[i],"%r")||strstr(infile[i],"%b")) continue;
sbsreadmsg(infile[i],prcopt->sbassatsel,sbs);
}
/* read lex message files */
for (i=0;i<n;i++) {
if (strstr(infile[i],"%r")||strstr(infile[i],"%b")) continue;
lexreadmsg(infile[i],0,lex);
}
/* allocate sbas ephemeris */
nav->ns=nav->nsmax=NSATSBS*2;
if (!(nav->seph=(seph_t *)malloc(sizeof(seph_t)*nav->ns))) {
showmsg("error : sbas ephem memory allocation");
trace(1,"error : sbas ephem memory allocation");
return;
}
for (i=0;i<nav->ns;i++) nav->seph[i]=seph0;
/* set rtcm file and initialize rtcm struct */
rtcm_file[0]=rtcm_path[0]='\0'; fp_rtcm=NULL;
for (i=0;i<n;i++) {
if ((ext=strrchr(infile[i],'.'))&&
(!strcmp(ext,".rtcm3")||!strcmp(ext,".RTCM3"))) {
strcpy(rtcm_file,infile[i]);
init_rtcm(&rtcm);
break;
}
}
}
开发者ID:idaohang,项目名称:rtk-streamserver,代码行数:56,代码来源:postpos.c
示例19: antpos
/* antenna phase center position ---------------------------------------------*/
static int antpos(prcopt_t *opt, int rcvno, const obs_t *obs, const nav_t *nav,
const sta_t *sta, const char *posfile)
{
double *rr=rcvno==1?opt->ru:opt->rb,del[3],pos[3],dr[3]={0};
int i,postype=rcvno==1?opt->rovpos:opt->refpos;
char *name;
trace(3,"antpos : rcvno=%d\n",rcvno);
if (postype==1) { /* average of single position */
if (!avepos(rr,rcvno,obs,nav,opt)) {
showmsg("error : station pos computation");
return 0;
}
}
else if (postype==2) { /* read from position file */
name=stas[rcvno==1?0:1].name;
if (!getstapos(posfile,name,rr)) {
showmsg("error : no position of %s in %s",name,posfile);
return 0;
}
}
else if (postype==3) { /* get from rinex header */
if (norm(stas[rcvno==1?0:1].pos,3)<=0.0) {
showmsg("error : no position in rinex header");
trace(1,"no position position in rinex header\n");
return 0;
}
/* antenna delta */
if (stas[rcvno==1?0:1].deltype==0) { /* enu */
for (i=0;i<3;i++) del[i]=stas[rcvno==1?0:1].del[i];
del[2]+=stas[rcvno==1?0:1].hgt;
ecef2pos(stas[rcvno==1?0:1].pos,pos);
enu2ecef(pos,del,dr);
}
else { /* xyz */
for (i=0;i<3;i++) dr[i]=stas[rcvno==1?0:1].del[i];
}
for (i=0;i<3;i++) rr[i]=stas[rcvno==1?0:1].pos[i]+dr[i];
}
return 1;
}
开发者ID:idaohang,项目名称:rtk-streamserver,代码行数:43,代码来源:postpos.c
示例20: showmsg
void
showmsg(int m, int rflag)
{
long addr, len;
int n, f, c, nl;
uchar *ip; char *sp, *cp;
if(m <= 0 || m > ncnotes){
Bad:
fprint(2, "no footnote %d\n", m);
return;
}
ip = &findex[8*(m-1)];
addr = LONG(ip);
len = SHORT(ip+4);
if(len == 0)
goto Bad;
Read(msg, addr, len);
if(m > nfnotes && rflag){
cp = sp = malloc(len);
memcpy(cp, msg, len);
n = strtol(cp, &cp, 10);
while(--n >= 0){
f = strtol(cp, &cp, 10);
if(f > 0)
showmsg(f, 0);
}
free(sp);
return;
}
Bprint(out, "%d\t", m);
ip = msg; nl = 0;
while(ip<&msg[len]){
switch(c = *ip++){
case 0:
case '\r':
break;
case '\n':
BPUTC(out, c);
++nl;
break;
default:
if(nl){
BPUTC(out, '\t');
nl = 0;
}
BPUTC(out, c);
break;
}
}
for(; nl<2; nl++)
BPUTC(out, '\n');
}
开发者ID:kahrs,项目名称:cda,代码行数:53,代码来源:notes.c
注:本文中的showmsg函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论