• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ sheet_setbuf函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中sheet_setbuf函数的典型用法代码示例。如果您正苦于以下问题：C++ sheet_setbuf函数的具体用法？C++ sheet_setbuf怎么用？C++ sheet_setbuf使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了sheet_setbuf函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: sheet_alloc

struct SHEET *open_console(struct SHTCTL *shtctl, unsigned int memtotal)
{
	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
	struct SHEET *sht = sheet_alloc(shtctl);
	unsigned char *buf = (unsigned char *) memman_alloc_4k(memman, 256 * 165);
	struct TASK *task = task_alloc();
	int *cons_fifo = (int *) memman_alloc_4k(memman, 128 * 4);
	sheet_setbuf(sht, buf, 256, 165, -1); /* 透明色なし */
	make_window8(buf, 256, 165, "console", 0);
	make_textbox8(sht, 8, 28, 240, 128, COL8_000000);
	task->cons_stack = memman_alloc_4k(memman, 64 * 1024);
	task->tss.esp = task->cons_stack + 64 * 1024 - 12;
	task->tss.eip = (int) &console_task;
	task->tss.es = 1 * 8;
	task->tss.cs = 2 * 8;
	task->tss.ss = 1 * 8;
	task->tss.ds = 1 * 8;
	task->tss.fs = 1 * 8;
	task->tss.gs = 1 * 8;
	*((int *) (task->tss.esp + 4)) = (int) sht;
	*((int *) (task->tss.esp + 8)) = memtotal;
	task_run(task, 2, 2); /* level=2, priority=2 */
	sht->task = task;
	sht->flags |= 0x20;	/* カーソルあり */
	fifo32_init(&task->fifo, 128, cons_fifo, task);
	return sht;
}
开发者ID:FuDesign2008，项目名称:mess，代码行数:27，代码来源:bootpack.c


示例2: sheet_alloc

struct SHEET *open_console(struct SHTCTL *shtctl, unsigned int memtotal)
{
  struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
  struct SHEET *sht = sheet_alloc(shtctl);
  unsigned char *buf = (unsigned char *) memman_alloc_4k(memman, 256 * 165);
  sheet_setbuf(sht, buf, 256, 165, -1); /* 透明色なし */
  make_window8(buf, 256, 165, "console", 0);
  make_textbox8(sht, 8, 28, 240, 128, COL8_000000);
  sht->task = open_constask(sht, memtotal);
  sht->flags |= 0x20; /* カーソルあり */
  return sht;
}
开发者ID:msyksphinz，项目名称:sicp_exercise，代码行数:12，代码来源:bootpack.c


示例3: task_now

int *hrb_api(int edi, int esi, int ebp, int esp, int ebx, int edx, int ecx, int eax)
{
	int ds_base = *((int *) 0xfe8);
	struct TASK *task = task_now();
	struct CONSOLE *cons = (struct CONSOLE *) *((int *) 0x0fec);
	struct SHTCTL *shtctl = (struct SHTCTL *) *((int *) 0x0fe4);
	struct SHEET *sht;
	int *reg = &eax + 1;	/* eaxの次の番地 */
		/* 保存のためのPUSHADを強引に書き換える */
		/* reg[0] : EDI,   reg[1] : ESI,   reg[2] : EBP,   reg[3] : ESP */
		/* reg[4] : EBX,   reg[5] : EDX,   reg[6] : ECX,   reg[7] : EAX */

	if (edx == 1) {
		cons_putchar(cons, eax & 0xff, 1);
	} else if (edx == 2) {
		cons_putstr0(cons, (char *) ebx + ds_base);
	} else if (edx == 3) {
		cons_putstr1(cons, (char *) ebx + ds_base, ecx);
	} else if (edx == 4) {
		return &(task->tss.esp0);
	} else if (edx == 5) {
		sht = sheet_alloc(shtctl);
		sheet_setbuf(sht, (char *) ebx + ds_base, esi, edi, eax);
		make_window8((char *) ebx + ds_base, esi, edi, (char *) ecx + ds_base, 0);
		sheet_slide(sht, 100, 50);
		sheet_updown(sht, 3);	/* 3という高さはtask_aの上 */
		reg[7] = (int) sht;
	} else if (edx == 6) {
		sht = (struct SHEET *) ebx;
		putfonts8_asc(sht->buf, sht->bxsize, esi, edi, eax, (char *) ebp + ds_base);
		sheet_refresh(sht, esi, edi, esi + ecx * 8, edi + 16);
	} else if (edx == 7) {
		sht = (struct SHEET *) ebx;
		boxfill8(sht->buf, sht->bxsize, ebp, eax, ecx, esi, edi);
		sheet_refresh(sht, eax, ecx, esi + 1, edi + 1);
	} else if (edx == 8) {
		memman_init((struct MEMMAN *) (ebx + ds_base));
		ecx &= 0xfffffff0;	/* 16バイト単位に */
		memman_free((struct MEMMAN *) (ebx + ds_base), eax, ecx);
	} else if (edx == 9) {
		ecx = (ecx + 0x0f) & 0xfffffff0; /* 16バイト単位に切り上げ */
		reg[7] = memman_alloc((struct MEMMAN *) (ebx + ds_base), ecx);
	} else if (edx == 10) {
		ecx = (ecx + 0x0f) & 0xfffffff0; /* 16バイト単位に切り上げ */
		memman_free((struct MEMMAN *) (ebx + ds_base), eax, ecx);
	} else if (edx == 11) {
		sht = (struct SHEET *) ebx;
		sht->buf[sht->bxsize * edi + esi] = eax;
		sheet_refresh(sht, esi, edi, esi + 1, edi + 1);
	}
	return 0;
}
开发者ID:ymkjp，项目名称:home-made-os，代码行数:52，代码来源:console.c


示例4: HariMain

void HariMain(void)
{
  struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
  char s[40], keybuf[32], mousebuf[128];
  int mx, my, i;
  unsigned int memtotal;
  struct MOUSE_DEC mdec;
  struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
  struct SHTCTL *shtctl;
  struct SHEET *sht_back, *sht_mouse;
  unsigned char *buf_back, buf_mouse[256];

  init_gdtidt();
  init_pic();
  io_sti(); /* GDT,IDT,PIC*/
  fifo8_init(&keyfifo, 32, keybuf);
  fifo8_init(&mousefifo, 128, mousebuf);
  io_out8(PIC0_IMR, 0xf9); // 11111001,PIC1和IRQ1,
  io_out8(PIC1_IMR, 0xef); // 11101111, IRQ12
  init_keyboard();
  enable_mouse(&mdec);

  memtotal = memtest(0x00400000, 0xbfffffff);
  memman_init(memman);
  memman_free(memman, 0x00001000, 0x0009e000);
  memman_free(memman, 0x00400000, memtotal - 0x00400000);

  init_palette();
  shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
  sht_back = sheet_alloc(shtctl);
  sht_mouse = sheet_alloc(shtctl);
  buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);

  sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1);
  sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
  init_screen8(buf_back, binfo->scrnx, binfo->scrny);
  init_mouse_cursor8(buf_mouse, 99);
  sheet_slide(sht_back, 0, 0);
  mx = (binfo->scrnx - 16) / 2;
  my = (binfo->scrny - 28 - 16) / 2;
  sheet_slide(sht_mouse, mx, my);
  sheet_updown(sht_back, 0);
  sheet_updown(sht_mouse, 1);

  sprintf(s, "(0x%x, 0x%x)", mx, my);
  putfonts8_asc(buf_back, binfo->scrnx, 0, 0, COL8_FFFFFF, s);
  sprintf(s, "memory 0x%xMB, free : 0x%xKB", memtotal / (1024 * 1024), memman_total(memman) / 1024);
  putfonts8_asc(buf_back, binfo->scrnx, 0, 32, COL8_FFFFFF, s);
  sheet_refresh(sht_back, 0, 0, binfo->scrnx, 48);

  for(;;) {
     io_cli();
     if(0 == fifo8_status(&keyfifo) + fifo8_status(&mousefifo)) {
	 io_stihlt();
     } else {
       if(0 != fifo8_status(&keyfifo)) {
	 i = fifo8_get(&keyfifo);
	 io_sti();
	 sprintf(s, "0x%x", i);
	 boxfill8(buf_back, binfo->scrnx, COL8_008484, 0, 16, 8 * 8 - 1, 31);
	 putfonts8_asc(buf_back, binfo->scrnx, 0, 16, COL8_FFFFFF, s);
	 sheet_refresh(sht_back, 0, 16, 8 * 8, 32);
       } else if (0 != fifo8_status(&mousefifo)) {
	 i = fifo8_get(&mousefifo);
	 io_sti();
	 if (0 != mouse_decode(&mdec, i)) {
	   sprintf(s, "[lcr 0x%x 0x%x 0x%x]", mdec.buf[0], mdec.buf[1], mdec.buf[2]);
	   if (0 != (mdec.btn & 0x01)) {
	     s[1] = 'L';
	   }
	   if (0 != (mdec.btn & 0x02)) {
	     s[3] = 'R';
	   }
	   if (0 != (mdec.btn & 0x04)) {
	     s[2] = 'C';
	   }
	   boxfill8(buf_back, binfo->scrnx, COL8_008484, 64, 16, 64 + 24 * 8 - 1, 31);
	   putfonts8_asc(buf_back, binfo->scrnx, 64, 16, COL8_FFFFFF, s);
	   sheet_refresh(sht_back, 64, 16, 64 + 24 * 8, 32);
	   mx += mdec.x;
	   my += mdec.y;
	   if (mx < 0) {
	     mx = 0;
	   }
	   if (my < 0) {
	     my = 0;
	   }
	   if (mx > binfo->scrnx - 1) {
	     mx = binfo->scrnx - 1;
	   }
	   if (my > binfo->scrny - 1) {
	     my = binfo->scrny - 1;
	   }
	   sprintf(s, "(0x%x, 0x%x)", mx, my);
	   boxfill8(buf_back, binfo->scrnx, COL8_008484, 0, 0, 8 * 16 - 1, 15); /* 隐藏坐标*/
	   putfonts8_asc(buf_back, binfo->scrnx, 0, 0, COL8_FFFFFF, s); /* 显示坐标*/
	   sheet_refresh(sht_back, 0, 0, 8 * 16, 16);
	   sheet_slide(sht_mouse, mx, my); /* 显示鼠标 */
	 }
       }
//.........这里部分代码省略.........
开发者ID:passengerxlt，项目名称:30OS_Ubuntu，代码行数:101，代码来源:bootpack.c


示例5: HariMain

void HariMain(void)
{
    struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
    char s[40], keybuf[32], mousebuf[128];
    int mx, my, i;
    unsigned int memtotal, count = 0;
    struct MOUSE_DEC mdec;
    struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
    struct SHTCTL *shtctl;
    struct SHEET *sht_back, *sht_mouse, *sht_win;
    unsigned char *buf_back, buf_mouse[256], *buf_win;

    init_gdtidt();
    init_pic();
    io_sti(); /* IDT/PICの初期化が終わったのでCPUの割り込み禁止を解除 */
    fifo8_init(&keyfifo, 32, keybuf);
    fifo8_init(&mousefifo, 128, mousebuf);
    io_out8(PIC0_IMR, 0xf9); /* PIC1とキーボードを許可(11111001) */
    io_out8(PIC1_IMR, 0xef); /* マウスを許可(11101111) */

    init_keyboard();
    enable_mouse(&mdec);
    memtotal = memtest(0x00400000, 0xbfffffff);
    memman_init(memman);
    memman_free(memman, 0x00001000, 0x0009e000); /* 0x00001000 - 0x0009efff */
    memman_free(memman, 0x00400000, memtotal - 0x00400000);

    init_palette();
    shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
    sht_back  = sheet_alloc(shtctl);
    sht_mouse = sheet_alloc(shtctl);
    sht_win   = sheet_alloc(shtctl);
    buf_back  = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
    buf_win   = (unsigned char *) memman_alloc_4k(memman, 160 * 52);
    sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); /* 透明色なし */
    sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
    sheet_setbuf(sht_win, buf_win, 160, 52, -1); /* 透明色なし */
    init_screen8(buf_back, binfo->scrnx, binfo->scrny);
    init_mouse_cursor8(buf_mouse, 99);
    make_window8(buf_win, 160, 52, "counter");
    sheet_slide(sht_back, 0, 0);
    mx = (binfo->scrnx - 16) / 2; /* 画面中央になるように座標計算 */
    my = (binfo->scrny - 28 - 16) / 2;
    sheet_slide(sht_mouse, mx, my);
    sheet_slide(sht_win, 80, 72);
    sheet_updown(sht_back,  0);
    sheet_updown(sht_win,   1);
    sheet_updown(sht_mouse, 2);
    sprintf(s, "(%3d, %3d)", mx, my);
    putfonts8_asc(buf_back, binfo->scrnx, 0, 0, COL8_FFFFFF, s);
    sprintf(s, "memory %dMB   free : %dKB",
            memtotal / (1024 * 1024), memman_total(memman) / 1024);
    putfonts8_asc(buf_back, binfo->scrnx, 0, 32, COL8_FFFFFF, s);
    sheet_refresh(sht_back, 0, 0, binfo->scrnx, 48);

    for (;;) {
        count++;
        sprintf(s, "%010d", count);
        boxfill8(buf_win, 160, COL8_C6C6C6, 40, 28, 119, 43);
        putfonts8_asc(buf_win, 160, 40, 28, COL8_000000, s);
        sheet_refresh(sht_win, 40, 28, 120, 44);

        io_cli();
        if (fifo8_status(&keyfifo) + fifo8_status(&mousefifo) == 0) {
            io_sti();
        } else {
            if (fifo8_status(&keyfifo) != 0) {
                i = fifo8_get(&keyfifo);
                io_sti();
                sprintf(s, "%02X", i);
                boxfill8(buf_back, binfo->scrnx, COL8_008484,  0, 16, 15, 31);
                putfonts8_asc(buf_back, binfo->scrnx, 0, 16, COL8_FFFFFF, s);
                sheet_refresh(sht_back, 0, 16, 16, 32);
            } else if (fifo8_status(&mousefifo) != 0) {
                i = fifo8_get(&mousefifo);
                io_sti();
                if (mouse_decode(&mdec, i) != 0) {
                    /* データが3バイト揃ったので表示 */
                    sprintf(s, "[lcr %4d %4d]", mdec.x, mdec.y);
                    if ((mdec.btn & 0x01) != 0) {
                        s[1] = 'L';
                    }
                    if ((mdec.btn & 0x02) != 0) {
                        s[3] = 'R';
                    }
                    if ((mdec.btn & 0x04) != 0) {
                        s[2] = 'C';
                    }
                    boxfill8(buf_back, binfo->scrnx, COL8_008484, 32, 16, 32 + 15 * 8 - 1, 31);
                    putfonts8_asc(buf_back, binfo->scrnx, 32, 16, COL8_FFFFFF, s);
                    sheet_refresh(sht_back, 32, 16, 32 + 15 * 8, 32);
                    /* マウスカーソルの移動 */
                    mx += mdec.x;
                    my += mdec.y;
                    if (mx < 0) {
                        mx = 0;
                    }
                    if (my < 0) {
                        my = 0;
                    }
//.........这里部分代码省略.........
开发者ID:siutin，项目名称:self_os，代码行数:101，代码来源:bootpack.c


示例6: HariMain

void HariMain(void)
{

	struct BOOTINFO *binfo = (struct BOOTINFO *) 0x0ff0;//the boot info saved in asmhead
	
	char s[40];
	int mx, my, i, cursor_x, cursor_c;
	unsigned int memtotal;
	struct MOUSE_DEC mdec;
	
	//内存管理结构地址
	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
	struct SHTCTL *shtctl;
	static char keytable0[0x80] = {
		0,   0,   '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0,   0,
		'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0,   0,   'A', 'S',
		'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0,   0,   ']', 'Z', 'X', 'C', 'V',
		'B', 'N', 'M', ',', '.', '/', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
		'2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0x5c, 0,  0,   0,   0,   0,   0,   0,   0,   0,   0x5c, 0,  0
	};
	static char keytable1[0x80] = {
		0,   0,   '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0,   0,
		'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0,   0,   'A', 'S',
		'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0,   0,   '}', 'Z', 'X', 'C', 'V',
		'B', 'N', 'M', '<', '>', '?', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
		'2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   '_', 0,   0,   0,   0,   0,   0,   0,   0,   0,   '|', 0,   0
	};
	
	unsigned char *buf_back, buf_mouse[256], *buf_win, *buf_win_b, *buf_cons;
	struct SHEET *sht_back, *sht_mouse, *sht_win, *sht_win_b[3], *sht_cons;
	struct TASK *task_a, *task_b[3], *task_cons;
	struct TIMER *timer;
	int key_to = 0, key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;
	struct FIFO32 fifo, keycmd;
	int fifobuf[128], keycmd_buf[32];

	
	init_gdtidt();
	init_pic();//init the programed interrupt controller.
	io_sti(); // enable interrupt
	
	fifo32_init(&fifo, 128, fifobuf, 0);//初始化队列
	init_pit();//初始化计时器;
	init_keyboard(&fifo, 256);
	enable_mouse(&fifo, 512, &mdec);//鼠标中断
	io_out8(PIC0_IMR, 0xf8); /* PIC1  允许 0(timer),1,2号中断，屏蔽其他(11111000) */
	io_out8(PIC1_IMR, 0xef); /* 允许c号中断，屏蔽其他(11101111) */
	fifo32_init(&keycmd, 32, keycmd_buf, 0);
	//内存管理初始化
	memtotal = memtest(0x00400000, 0xbfffffff);
	memman_init(memman);
	memman_free(memman, 0x00001000, 0x0009e000); /* 0x00001000 - 0x0009efff */
	memman_free(memman, 0x00400000, memtotal - 0x00400000);
	
	init_palette();	//调色板
	shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);//对图层管理结构体的初始化
	task_a = task_init(memman);
	fifo.task = task_a;
	task_run(task_a,1,0);
	*((int *) 0x0fe4) = (int) shtctl;

	/* sht_back */
	sht_back  = sheet_alloc(shtctl);
	buf_back  = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
	sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); /* 无透明色 */
	/*桌面先显示到内存中*/
	init_screen8(buf_back, binfo->scrnx, binfo->scrny);
	
	
	/* sht_cons */
	sht_cons = sheet_alloc(shtctl);
	buf_cons = (unsigned char *) memman_alloc_4k(memman, 256 * 165);
	sheet_setbuf(sht_cons, buf_cons, 256, 165, -1); /* 摟柧怓側偟 */
	make_window8(buf_cons, 256, 165, "console", 0);
	make_textbox8(sht_cons, 8, 28, 240, 128, COL8_000000);
	task_cons = task_alloc();
	task_cons->tss.esp = memman_alloc_4k(memman, 64 * 1024) + 64 * 1024 - 12;
	task_cons->tss.eip = (int) &console_task;
	task_cons->tss.es = 1 * 8;
	task_cons->tss.cs = 2 * 8;
	task_cons->tss.ss = 1 * 8;
	task_cons->tss.ds = 1 * 8;
	task_cons->tss.fs = 1 * 8;
	task_cons->tss.gs = 1 * 8;
	*((int *) (task_cons->tss.esp + 4)) = (int) sht_cons;
	*((int *) (task_cons->tss.esp + 8)) = memtotal;
	task_run(task_cons, 2, 2); /* level=2, priority=2 */
	
	/* sht_mouse */
	sht_mouse = sheet_alloc(shtctl);
	sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
	/*鼠标显示到内存中*/
	init_mouse_cursor8(buf_mouse, 99);
	mx = (binfo->scrnx - 16) / 2; /* 夋柺拞墰偵側傞傛偆偵嵗昗寁嶼 */
//.........这里部分代码省略.........
开发者ID:BpLife，项目名称:myos，代码行数:101，代码来源:bootpack.c


示例7: main

void main(){
	struct BOOTINFO *binfo;
	struct FIFO32 fifo;
	binfo = (struct BOOTINFO *) ADR_BOOTINFO;

	char s[MAX_LENGTH];
	char mcursor[256];

	// mouse and keyboard data
	int fifobuf[BUF_LEN];

	struct TIMER *timer, *timer2, *timer3;

	int fifo_data;
	struct MOUSE_DEC mdec;
	int mx,my;

	// memory manager
	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
	unsigned int memtotal;


	// overlay control
	struct SHTCTL *shtctl;
	struct SHEET *sht_win, *sht_mouse;
	unsigned char *buf_back, buf_mouse[256];
	unsigned char *buf_win;

	// gdt control
	init_gdtidt();
	init_pic();
	init_pit();
	_io_sti();

	// init fifo
	fifo32_init(&fifo, BUF_LEN, fifobuf);

	init_keyboard(&fifo, 256);
	enable_mouse(&fifo, 512, &mdec);

	timer = timer_alloc();
	timer_init(timer, &fifo, 10);
	timer_settime(timer, 1000);


	timer2 = timer_alloc();
	timer_init(timer2, &fifo, 3);
	timer_settime(timer2, 300);
	
	timer3 = timer_alloc();
	timer_init(timer3,&fifo, 1);
	timer_settime(timer3, 50);


	// must after init pit
	// qemu 1000 = 10s
	// bochs 1000 = 1s
	_io_out8(PIC0_IMR,0xf8);
	_io_out8(PIC1_IMR,0xef);

	// mouse and keyboard control

	// memory set
	memtotal = memtest(0x00400000, 0xbfffffff);
	memman_init(memman);
	// this is ERROR!
	// c400 is system
	memman_free(memman, 0x00400000, memtotal - 0x00400000);


	/**************************************************
	 *  screen 
	 *  ----------------------------------------------*/
	// video initialize
	init_palette();

	shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
	sht_back = sheet_alloc(shtctl);			// background sheet
	sht_mouse = sheet_alloc(shtctl);		// mouse sheet
	sht_win = sheet_alloc(shtctl);

	buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);		// background buffer
	buf_win = (unsigned char *) memman_alloc_4k(memman,160*52);


	sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1);	// bind buf
	sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
	sheet_setbuf(sht_win, buf_win, 160, 52, -1);

	init_screen(buf_back, binfo->scrnx, binfo->scrny);	// init color
	init_mouse_cursor8(buf_mouse, 99);
	make_window8(buf_win, 160, 52, "counter");

	// init slide
	sheet_slide(sht_back, 0, 0);


	// initial mouse position
	mx = (binfo->scrnx - 16) / 2; 
	my = (binfo->scrny - 28 - 16) / 2;
//.........这里部分代码省略.........
开发者ID:SwordYork，项目名称:slef，代码行数:101，代码来源:init.c


示例8: HariMain

void HariMain(void)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	struct SHTCTL *shtctl;
	char s[40];
	struct FIFO32 fifo, keycmd;
	int fifobuf[128], keycmd_buf[32];
	int mx, my, i, new_mx = -1, new_my = 0, new_wx = 0x7fffffff, new_wy = 0;
	unsigned int memtotal;
	struct MOUSE_DEC mdec;
	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
	unsigned char *buf_back, buf_mouse[256];
	struct SHEET *sht_back, *sht_mouse;
	struct TASK *task_a, *task;
	static char keytable0[0x80] = {
		0,   0,   '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0x08, 0,
		'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0x0a, 0, 'A', 'S',
		'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0,   0,   ']', 'Z', 'X', 'C', 'V',
		'B', 'N', 'M', ',', '.', '/', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
		'2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0x5c, 0,  0,   0,   0,   0,   0,   0,   0,   0,   0x5c, 0,  0
	};
	static char keytable1[0x80] = {
		0,   0,   '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0x08, 0,
		'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0x0a, 0, 'A', 'S',
		'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0,   0,   '}', 'Z', 'X', 'C', 'V',
		'B', 'N', 'M', '<', '>', '?', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
		'2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   '_', 0,   0,   0,   0,   0,   0,   0,   0,   0,   '|', 0,   0
	};
	int key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;
	int j, x, y, mmx = -1, mmy = -1, mmx2 = 0;
	struct SHEET *sht = 0, *key_win;

	init_gdtidt();
	init_pic();
	io_sti(); /* IDT/PICの初期化が終わったのでCPUの割り込み禁止を解除 */
	fifo32_init(&fifo, 128, fifobuf, 0);
	*((int *) 0x0fec) = (int) &fifo;
	init_pit();
	init_keyboard(&fifo, 256);
	enable_mouse(&fifo, 512, &mdec);
	io_out8(PIC0_IMR, 0xf8); /* PITとPIC1とキーボードを許可(11111000) */
	io_out8(PIC1_IMR, 0xef); /* マウスを許可(11101111) */
	fifo32_init(&keycmd, 32, keycmd_buf, 0);

	memtotal = memtest(0x00400000, 0xbfffffff);
	memman_init(memman);
	memman_free(memman, 0x00001000, 0x0009e000); /* 0x00001000 - 0x0009efff */
	memman_free(memman, 0x00400000, memtotal - 0x00400000);

	init_palette();
	shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
	task_a = task_init(memman);
	fifo.task = task_a;
	task_run(task_a, 1, 2);
	*((int *) 0x0fe4) = (int) shtctl;

	/* sht_back */
	sht_back  = sheet_alloc(shtctl);
	buf_back  = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
	sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); /* 透明色なし */
	init_screen8(buf_back, binfo->scrnx, binfo->scrny);

	/* sht_cons */
	key_win = open_console(shtctl, memtotal);

	/* sht_mouse */
	sht_mouse = sheet_alloc(shtctl);
	sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
	init_mouse_cursor8(buf_mouse, 99);
	mx = (binfo->scrnx - 16) / 2; /* 画面中央になるように座標計算 */
	my = (binfo->scrny - 28 - 16) / 2;

	sheet_slide(sht_back,  0,  0);
	sheet_slide(key_win,   32, 4);
	sheet_slide(sht_mouse, mx, my);
	sheet_updown(sht_back,  0);
	sheet_updown(key_win,   1);
	sheet_updown(sht_mouse, 2);
	keywin_on(key_win);

	/* 最初にキーボード状態との食い違いがないように、設定しておくことにする */
	fifo32_put(&keycmd, KEYCMD_LED);
	fifo32_put(&keycmd, key_leds);

	for (;;) {
		if (fifo32_status(&keycmd) > 0 && keycmd_wait < 0) {
			/* キーボードコントローラに送るデータがあれば、送る */
			keycmd_wait = fifo32_get(&keycmd);
			wait_KBC_sendready();
			io_out8(PORT_KEYDAT, keycmd_wait);
		}
		io_cli();
		if (fifo32_status(&fifo) == 0) {
			/* FIFOがからっぽになったので、保留している描画があれば実行する */
//.........这里部分代码省略.........
开发者ID:FuDesign2008，项目名称:mess，代码行数:101，代码来源:bootpack.c


示例9: HariMain

void HariMain(void)
{
  int i;
  int mmx = -1, mmy = -1, mmx2 = 0;
  struct SHEET *sht = 0, *key_win;
  struct BOOTINFO *binfo = (struct BOOTINFO *)0x0ff0;
  int xsize = (*binfo).scrnx;
  int ysize = (*binfo).scrny;
  int mx = xsize/2;
  int my = ysize/2;
  int new_mx = -1, new_my = 0, new_wx = 0x7fffffff, new_wy = 0;
  int fifobuf[128], keycmd_buf[32], *cons_fifo[2];
  struct MOUSE_DEC mdec;
  unsigned char s[32];
  unsigned int memtotal;
  struct MEMMAN *memman = (struct MEMMAN *)MEMMAN_ADDR;
  int key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;
  
  struct SHTCTL *shtctl;
  struct SHEET *sht_back, *sht_mouse;
  unsigned char *buf_back, buf_mouse[256], *buf_cons[2];
  struct TIMER *timer;
  struct FIFO32 fifo, keycmd;
  
  struct TASK *task_a, *task_cons[2];
  
  static char keytable0[0x80] = {
      0,   0,   '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0x08,  0,
      'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0x0a,   0, 'A', 'S',
      'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0,   0,   ']', 'Z', 'X', 'C', 'V',
      'B', 'N', 'M', ',', '.', '/', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
      0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
      '2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
      0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
      0,   0,   0,   0x5c, 0,  0,   0,   0,   0,   0,   0,   0,   0,   0x5c, 0,  0
  };
  static char keytable1[0x80] = {
      0,   0,   '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0x08, 0,
      'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0x0a,   0, 'A', 'S',
      'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0,   0,   '}', 'Z', 'X', 'C', 'V',
      'B', 'N', 'M', '<', '>', '?', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
      0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
      '2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
      0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
      0,   0,   0,   '_', 0,   0,   0,   0,   0,   0,   0,   0,   0,   '|', 0,   0
  };

  init_gdtidt ();
  init_pic ();
  io_sti ();

  fifo32_init(&fifo, 32, fifobuf, 0);
  fifo32_init(&keycmd, 32, keycmd_buf, 0);
  
  init_pit();
  io_out8(PIC0_IMR, 0xf8); /* Allow PIT and Keyboard (11111000) */
  io_out8(PIC1_IMR, 0xef); /* Allow Mouse (11101111) */
  init_keyboard (&fifo, 256);
  enable_mouse (&fifo, 512, &mdec);

  timer = timer_alloc();
  timer_init(timer, &fifo, 1);
  timer_settime(timer, 50);
  
  memtotal = memtest(0x00400000, 0xbfffffff);
  memman_init (memman);
  memman_free (memman, 0x00001000, 0x009e000);   /* 0x00001000 - 0x0009efff */
  memman_free (memman, 0x00400000, memtotal - 0x00400000);

  init_pallete();
  shtctl = shtctl_init (memman, binfo->vram, binfo->scrnx, binfo->scrny);
  sht_back  = sheet_alloc(shtctl);
  sht_mouse = sheet_alloc(shtctl);
  buf_back = (unsigned char *)memman_alloc_4k (memman, binfo->scrnx * binfo->scrny);
  sheet_setbuf (sht_back,  buf_back, binfo->scrnx, binfo->scrny, -1);
  sheet_setbuf (sht_mouse, buf_mouse, 16, 16, 99);
  init_screen (buf_back, xsize, ysize);
  init_mouse_cursor8 (buf_mouse, 99);
  
  *((int *) 0x0fec) = (int) &fifo;

  //=====================
  // Task Settings
  //=====================
  task_a = task_init(memman);
  fifo.task = task_a;
  task_run (task_a, 1, 0);
  
  /* console sheet */
  key_win = open_console (shtctl, memtotal);
  
  //=======================
  // Sheet Setting
  //=======================

  *((int *) 0x0fe4) = (int) shtctl;
  
  sheet_slide (sht_back,   0,  0);
  sheet_slide (key_win,   32,  4);
  sheet_slide (sht_mouse, mx, my);
//.........这里部分代码省略.........
开发者ID:msyksphinz，项目名称:sicp_exercise，代码行数:101，代码来源:bootpack.c


示例10: HariMain

void HariMain(void)
{
    struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
    struct FIFO32 fifo;
    char s[40];
    int fifobuf[128];
    struct TIMER *timer, *timer2, *timer3;
    int mx, my, i, cursor_x, cursor_c, task_b_esp;
    unsigned int memtotal;
    struct MOUSE_DEC mdec;
    struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
    struct SHTCTL *shtctl;
    struct SHEET *sht_back, *sht_mouse, *sht_win;
    unsigned char *buf_back, buf_mouse[256], *buf_win;
    static char keytable[0x54] = {
	0,   0,   '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0,   0,
	'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0,   0,   'A', 'S',
	'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0,   0,   ']', 'Z', 'X', 'C', 'V',
	'B', 'N', 'M', ',', '.', '/', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
	0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
	'2', '3', '0', '.'
    };
    struct TSS32 tss_a, tss_b;
    struct SEGMENT_DESCRIPTOR *gdt = (struct SEGMENT_DESCRIPTOR *) ADR_GDT;

    init_gdtidt();
    init_pic();
    io_sti();
    fifo32_init(&fifo, 128, fifobuf);
    init_pit();
    init_keyboard(&fifo, 256);
    enable_mouse(&fifo, 512, &mdec);
    io_out8(PIC0_IMR, 0xf8);
    io_out8(PIC1_IMR, 0xef);
    
    timer = timer_alloc();
	timer_init(timer, &fifo, 10);
    timer_settime(timer, 1000);
	timer2 = timer_alloc();
	timer_init(timer2, &fifo, 3);
	timer_settime(timer2, 300);
	timer3 = timer_alloc();
	timer_init(timer3, &fifo, 1);
	timer_settime(timer3, 50);
    
    memtotal = memtest(0x00400000, 0xbfffffff);
    memman_init(memman);
    memman_free(memman, 0x00001000, 0x0009e000);
    memman_free(memman, 0x00400000, memtotal - 0x00400000);

    init_palette();
    shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
    sht_back  = sheet_alloc(shtctl);
    sht_mouse = sheet_alloc(shtctl);
    sht_win   = sheet_alloc(shtctl);
    buf_back  = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
    buf_win   = (unsigned char *) memman_alloc_4k(memman, 160 * 52);
    sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1);
    sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
    sheet_setbuf(sht_win, buf_win, 160, 52, -1);
    init_screen8(buf_back, binfo->scrnx, binfo->scrny);
    init_mouse_cursor8(buf_mouse, 99);
    make_window8(buf_win, 160, 52, "window");
    make_textbox8(sht_win, 8, 28, 144, 16, COL8_FFFFFF);
    cursor_x = 8;
    cursor_c = COL8_FFFFFF;
    sheet_slide(sht_back, 0, 0);
    mx = (binfo->scrnx - 16) / 2;
    my = (binfo->scrny - 28 - 16) / 2;
    sheet_slide(sht_mouse, mx, my);
    sheet_slide(sht_win, 80, 72);
    sheet_updown(sht_back, 0);
    sheet_updown(sht_win,  1);
    sheet_updown(sht_mouse, 2);
    sprintf(s, "(%3d, %3d)", mx, my);
    putfonts8_asc_sht(sht_back,  0, 0, COL8_FFFFFF, COL8_008484, s, 10);
    sprintf(s, "memory %dMB  free : %dKB" , 
	    memtotal / (1024 * 1024), memman_total(memman) / 1024);
    putfonts8_asc_sht(sht_back, 0, 32, COL8_FFFFFF, COL8_008484, s, 40);

    tss_a.ldtr = 0;
    tss_a.iomap = 0x40000000;
    tss_b.ldtr = 0;
    tss_b.iomap = 0x40000000;
    set_segmdesc(gdt + 3, 103, (int) &tss_a, AR_TSS32);
    set_segmdesc(gdt + 4, 103, (int) &tss_b, AR_TSS32);
    load_tr(3 * 8);
    task_b_esp = memman_alloc_4k(memman, 64 * 1024) + 64 * 1024;
    tss_b.eip = (int) &task_b_main;
    tss_b.eflags = 0x00000202;
    tss_b.eax = 0;
    tss_b.ecx = 0;
    tss_b.edx = 0;
    tss_b.ebx = 0;
    tss_b.esp = task_b_esp;
    tss_b.ebp = 0;
    tss_b.esi = 0;
    tss_b.edi = 0;
    tss_b.es = 1 * 8;
    tss_b.cs = 2 * 8;
//.........这里部分代码省略.........
开发者ID:LinuxKernelDevelopment，项目名称:30，代码行数:101，代码来源:bootpack.c


示例11: task_now

int *hrb_api(int edi, int esi, int ebp, int esp, int ebx, int edx, int ecx, int eax)
{
	struct TASK *task = task_now();
	int ds_base = task->ds_base;
	struct CONSOLE *cons = task->cons;
	struct SHTCTL *shtctl = (struct SHTCTL *) *((int *) 0x0fe4);
	struct SHEET *sht;
	struct FIFO32 *sys_fifo = (struct FIFO32 *) *((int *) 0x0fec);
	int *reg = &eax + 1;	/* eaxの次の番地 */
		/* 保存のためのPUSHADを強引に書き換える */
		/* reg[0] : EDI,   reg[1] : ESI,   reg[2] : EBP,   reg[3] : ESP */
		/* reg[4] : EBX,   reg[5] : EDX,   reg[6] : ECX,   reg[7] : EAX */
	int i;
	struct FILEINFO *finfo;
	struct FILEHANDLE *fh;
	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;

	if (edx == 1) {
		cons_putchar(cons, eax & 0xff, 1);
	} else if (edx == 2) {
		cons_putstr0(cons, (char *) ebx + ds_base);
	} else if (edx == 3) {
		cons_putstr1(cons, (char *) ebx + ds_base, ecx);
	} else if (edx == 4) {
		return &(task->tss.esp0);
	} else if (edx == 5) {
		sht = sheet_alloc(shtctl);
		sht->task = task;
		sht->flags |= 0x10;
		sheet_setbuf(sht, (char *) ebx + ds_base, esi, edi, eax);
		make_window8((char *) ebx + ds_base, esi, edi, (char *) ecx + ds_base, 0);
		sheet_slide(sht, ((shtctl->xsize - esi) / 2) & ~3, (shtctl->ysize - edi) / 2);
		sheet_updown(sht, shtctl->top); /* 今のマウスと同じ高さになるように指定： マウスはこの上になる */
		reg[7] = (int) sht;
	} else if (edx == 6) {
		sht = (struct SHEET *) (ebx & 0xfffffffe);
		putfonts8_asc(sht->buf, sht->bxsize, esi, edi, eax, (char *) ebp + ds_base);
		if ((ebx & 1) == 0) {
			sheet_refresh(sht, esi, edi, esi + ecx * 8, edi + 16);
		}
	} else if (edx == 7) {
		sht = (struct SHEET *) (ebx & 0xfffffffe);
		boxfill8(sht->buf, sht->bxsize, ebp, eax, ecx, esi, edi);
		if ((ebx & 1) == 0) {
			sheet_refresh(sht, eax, ecx, esi + 1, edi + 1);
		}
	} else if (edx == 8) {
		memman_init((struct MEMMAN *) (ebx + ds_base));
		ecx &= 0xfffffff0;	/* 16バイト単位に */
		memman_free((struct MEMMAN *) (ebx + ds_base), eax, ecx);
	} else if (edx == 9) {
		ecx = (ecx + 0x0f) & 0xfffffff0; /* 16バイト単位に切り上げ */
		reg[7] = memman_alloc((struct MEMMAN *) (ebx + ds_base), ecx);
	} else if (edx == 10) {
		ecx = (ecx + 0x0f) & 0xfffffff0; /* 16バイト単位に切り上げ */
		memman_free((struct MEMMAN *) (ebx + ds_base), eax, ecx);
	} else if (edx == 11) {
		sht = (struct SHEET *) (ebx & 0xfffffffe);
		sht->buf[sht->bxsize * edi + esi] = eax;
		if ((ebx & 1) == 0) {
			sheet_refresh(sht, esi, edi, esi + 1, edi + 1);
		}
	} else if (edx == 12) {
		sht = (struct SHEET *) ebx;
		sheet_refresh(sht, eax, ecx, esi, edi);
	} else if (edx == 13) {
		sht = (struct SHEET *) (ebx & 0xfffffffe);
		hrb_api_linewin(sht, eax, ecx, esi, edi, ebp);
		if ((ebx & 1) == 0) {
			sheet_refresh(sht, eax, ecx, esi + 1, edi + 1);
		}
	} else if (edx == 14) {
		sheet_free((struct SHEET *) ebx);
	} else if (edx == 15) {
		for (;;) {
			io_cli();
			if (fifo32_status(&task->fifo) == 0) {
				if (eax != 0) {
					task_sleep(task);	/* FIFOが空なので寝て待つ */
				} else {
					io_sti();
					reg[7] = -1;
					return 0;
				}
			}
			i = fifo32_get(&task->fifo);
			io_sti();
			if (i <= 1 && cons->sht != 0) { /* カーソル用タイマ */
				/* アプリ実行中はカーソルが出ないので、いつも次は表示用の1を注文しておく */
				timer_init(cons->timer, &task->fifo, 1); /* 次は1を */
				timer_settime(cons->timer, 50);
			}
			if (i == 2) {	/* カーソルON */
				cons->cur_c = COL8_FFFFFF;
			}
			if (i == 3) {	/* カーソルOFF */
				cons->cur_c = -1;
			}
			if (i == 4) {	/* コンソールだけを閉じる */
				timer_cancel(cons->timer);
//.........这里部分代码省略.........
开发者ID:bigpussy，项目名称:harib_os_src，代码行数:101，代码来源:console.c


示例12: HariMain

void HariMain(void)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	struct FIFO32 fifo;
	char s[40];
	int fifobuf[128];
	struct TIMER *timer, *timer2, *timer3;
	int mx, my, i;
	unsigned int memtotal;
	struct MOUSE_DEC mdec;
	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
	struct SHTCTL *shtctl;
	struct SHEET *sht_back, *sht_mouse, *sht_win;
	unsigned char *buf_back, buf_mouse[256], *buf_win;

	init_gdtidt();
	init_pic();
	io_sti(); /* IDT/PICの初期化が終わったのでCPUの割り込み禁止を解除 */
	fifo32_init(&fifo, 128, fifobuf);
	init_pit();
	init_keyboard(&fifo, 256);
	enable_mouse(&fifo, 512, &mdec);
	io_out8(PIC0_IMR, 0xf8); /* PITとPIC1とキーボードを許可(11111000) */
	io_out8(PIC1_IMR, 0xef); /* マウスを許可(11101111) */

	timer = timer_alloc();
	timer_init(timer, &fifo, 10);
	timer_settime(timer, 1000);
	timer2 = timer_alloc();
	timer_init(timer2, &fifo, 3);
	timer_settime(timer2, 300);
	timer3 = timer_alloc();
	timer_init(timer3, &fifo, 1);
	timer_settime(timer3, 50);

	memtotal = memtest(0x00400000, 0xbfffffff);
	memman_init(memman);
	memman_free(memman, 0x00001000, 0x0009e000); /* 0x00001000 - 0x0009efff */
	memman_free(memman, 0x00400000, memtotal - 0x00400000);

	init_palette();
	shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
	sht_back  = sheet_alloc(shtctl);
	sht_mouse = sheet_alloc(shtctl);
	sht_win   = sheet_alloc(shtctl);
	buf_back  = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
	buf_win   = (unsigned char *) memman_alloc_4k(memman, 160 * 52);
	sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); /* 透明色なし */
	sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
	sheet_setbuf(sht_win, buf_win, 160, 52, -1); /* 透明色なし */
	init_screen8(buf_back, binfo->scrnx, binfo->scrny);
	init_mouse_cursor8(buf_mouse, 99);
	make_window8(buf_win, 160, 52, "window");
	sheet_slide(sht_back, 0, 0);
	mx = (binfo->scrnx - 16) / 2; /* 画面中央になるように座標計算 */
	my = (binfo->scrny - 28 - 16) / 2;
	sheet_slide(sht_mouse, mx, my);
	sheet_slide(sht_win, 80, 72);
	sheet_updown(sht_back,  0);
	sheet_updown(sht_win,   1);
	sheet_updown(sht_mouse, 2);
	sprintf(s, "(%3d, %3d)", mx, my);
	putfonts8_asc_sht(sht_back, 0, 0, COL8_FFFFFF, COL8_008484, s, 10);
	sprintf(s, "memory %dMB   free : %dKB",
			memtotal / (1024 * 1024), memman_total(memman) / 1024);
	putfonts8_asc_sht(sht_back, 0, 32, COL8_FFFFFF, COL8_008484, s, 40);

	for (;;) {
		io_cli();
		if (fifo32_status(&fifo) == 0) {
			io_stihlt();
		} else {
			i = fifo32_get(&fifo);
			io_sti();
			if (256 <= i && i <= 511) { /* キーボードデータ */
				sprintf(s, "%02X", i - 256);
				putfonts8_asc_sht(sht_back, 0, 16, COL8_FFFFFF, COL8_008484, s, 2);
				if (i == 0x1e + 256) {
					putfonts8_asc_sht(sht_win, 40, 28, COL8_000000, COL8_C6C6C6, "A", 1);
				}
			} else if (512 <= i && i <= 767) { /* マウスデータ */
				if (mouse_decode(&mdec, i - 512) != 0) {
					/* データが3バイト揃ったので表示 */
					sprintf(s, "[lcr %4d %4d]", mdec.x, mdec.y);
					if ((mdec.btn & 0x01) != 0) {
						s[1] = 'L';
					}
					if ((mdec.btn & 0x02) != 0) {
						s[3] = 'R';
					}
					if ((mdec.btn & 0x04) != 0) {
						s[2] = 'C';
					}
					putfonts8_asc_sht(sht_back, 32, 16, COL8_FFFFFF, COL8_008484, s, 15);
					/* マウスカーソルの移動 */
					mx += mdec.x;
					my += mdec.y;
					if (mx < 0) {
						mx = 0;
					}
//.........这里部分代码省略.........
开发者ID:FuDesign2008，项目名称:mess，代码行数:101，代码来源:bootpack.c


示例13: HariMain

void HariMain(void)
{
    struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
    struct FIFO32 fifo, keycmd;
    char s[40];
    int fifobuf[128], keycmd_buf[32];
    struct TIMER *timer;
    int mx, my, i, cursor_x, cursor_c;
    unsigned int memtotal;
    struct MOUSE_DEC mdec;
    struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
    struct SHTCTL *shtctl;
    struct SHEET *sht_back, *sht_mouse, *sht_win, *sht_cons;
    unsigned char *buf_back, buf_mouse[256], *buf_win, *buf_cons;
    struct TASK *task_a, *task_cons;
    int key_to = 0, key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;;
    static char keytable0[0x80] = {
        0,   0,   '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '=', 0,   0,
        'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '[', ']', 0,   0,   'A', 'S',
        'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', '\'','`', 0,   '\\','Z', 'X', 'C', 'V',
        'B', 'N', 'M', ',', '.', '/', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
        0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
        '2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
        0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
        0,   0,   0,   0x5c, 0,  0,   0,   0,   0,   0,   0,   0,   0,   0x5c, 0,  0
    };
    static char keytable1[0x80] = {
        0,   0,   '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', '_', '+', 0,   0,
        'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}', 0,   0,   'A', 'S',
        'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', '"', '~',   0,   '|', 'Z', 'X', 'C', 'V',
        'B', 'N', 'M', '<', '>', '?', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
        0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
        '2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
        0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
        0,   0,   0,   '_', 0,   0,   0,   0,   0,   0,   0,   0,   0,   '|', 0,   0
    };

    init_gdtidt();
    init_pic();
    io_sti();

    fifo32_init(&fifo, 128, fifobuf, 0);
    fifo32_init(&keycmd, 32, keycmd_buf, 0);
    init_pit();
    init_keyboard(&fifo, 256);
    enable_mouse(&fifo, 512, &mdec);
    io_out8(PIC0_IMR, 0xf8);
    io_out8(PIC1_IMR, 0xef);

    memtotal = memtest(0x00400000, 0xbfffffff);
    memman_init(memman);
    memman_free(memman, 0x00001000, 0x0009e00);
    memman_free(memman, 0x00400000, memtotal - 0x00400000);

    init_palette();
    shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
    task_a = task_init(memman);
    fifo.task = task_a;
    task_run(task_a, 1, 0);

    /* sht_back */
    sht_back = sheet_alloc(shtctl);
    buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
    sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1);
    init_screen8(buf_back, binfo->scrnx, binfo->scrny);

    /* sht_cons */
    sht_cons = sheet_alloc(shtctl);
    buf_cons = (unsigned char *) memman_alloc_4k(memman, 256 * 165);
    sheet_setbuf(sht_cons, buf_cons, 256, 165, -1);
    make_window8(buf_cons, 256, 165, "console", 0);
    make_textbox8(sht_cons, 8, 28, 240, 128, COL8_000000);
    task_cons = task_alloc();
    task_cons->tss.esp = memman_alloc_4k(memman, 64 * 1024) + 64 * 1024 - 12;
    task_cons->tss.eip = (int) &console_task;
    task_cons->tss.es = 1 * 8;
    task_cons->tss.cs = 2 * 8;
    task_cons->tss.ss = 1 * 8;
    task_cons->tss.ds = 1 * 8;
    task_cons->tss.fs = 1 * 8;
    task_cons->tss.gs = 1 * 8;
    *((int *) (task_cons->tss.esp + 4)) = (int) sht_cons;
    *((int *) (task_cons->tss.esp + 8)) = memtotal;
    task_run(task_cons, 2, 2); /* level=2, priority=2 */

    /* sht_win */
    sht_win = sheet_alloc(shtctl);
    buf_win = (unsigned char *) memman_alloc_4k(memman, 160*52);
    sheet_setbuf(sht_win, buf_win, 144, 52, -1);
    make_window8(buf_win, 144, 52, "task_a", 1);
    make_textbox8(sht_win, 8, 28, 128, 16, COL8_FFFFFF);
    cursor_x = 8;
    cursor_c = COL8_FFFFFF;
    timer = timer_alloc();
    timer_init(timer, &fifo, 1);
    timer_settime(timer, 50);

    /* sht_mouse */
    sht_mouse = sheet_alloc(shtctl);
    sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
//.........这里部分代码省略.........
开发者ID:kissthink，项目名称:myOS，代码行数:101，代码来源:bootpack.c


示例14: HariMain

void HariMain(void)
{
    struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
    struct SHTCTL *shtctl;
    char s[40];
    struct FIFO32 fifo, keycmd;
    int fifobuf[128], keycmd_buf[32];
    int mx, my, i, cursor_x, cursor_c;
    unsigned int memtotal;
    struct MOUSE_DEC mdec;
    struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
    unsigned char *buf_back, buf_mouse[256], *buf_win, *buf_cons;
	struct SHEET *sht_back, *sht_mouse, *sht_win, *sht_cons;
    struct TASK *task_a, *task_cons;
    struct TIMER *timer;
    static char keytable0[0x80] = {
	0,   0,   '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0,   0,
	'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0,   0,   'A', 'S',
	'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0,   0,   ']', 'Z', 'X', 'C', 'V',
	'B', 'N', 'M', ',', '.', '/', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
	0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
	'2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0x5c, 0,  0,   0,   0,   0,   0,   0,   0,   0,   0x5c, 0,  0
    };
  	static char keytable1[0x80] = {
		0,   0,   '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0,   0,
		'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0,   0,   'A', 'S',
		'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0,   0,   '}', 'Z', 'X', 'C', 'V',
		'B', 'N', 'M', '<', '>', '?', 0,   '*', 0,   ' ', 0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   '7', '8', '9', '-', '4', '5', '6', '+', '1',
		'2', '3', '0', '.', 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
		0,   0,   0,   '_', 0,   0,   0,   0,   0,   0,

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ sheet_updown函数代码示例发布时间：2022-05-30
下一篇：
C++ sheet_refresh函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap