本文整理汇总了C++中sheet_alloc函数的典型用法代码示例。如果您正苦于以下问题：C++ sheet_alloc函数的具体用法？C++ sheet_alloc怎么用？C++ sheet_alloc使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了sheet_alloc函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: sheet_alloc
struct SHEET *open_console(struct SHTCTL *shtctl, unsigned int memtotal)
{
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
struct SHEET *sht = sheet_alloc(shtctl);
unsigned char *buf = (unsigned char *) memman_alloc_4k(memman, 256 * 165);
struct TASK *task = task_alloc();
int *cons_fifo = (int *) memman_alloc_4k(memman, 128 * 4);
sheet_setbuf(sht, buf, 256, 165, -1); /* 透明色なし */
make_window8(buf, 256, 165, "console", 0);
make_textbox8(sht, 8, 28, 240, 128, COL8_000000);
task->cons_stack = memman_alloc_4k(memman, 64 * 1024);
task->tss.esp = task->cons_stack + 64 * 1024 - 12;
task->tss.eip = (int) &console_task;
task->tss.es = 1 * 8;
task->tss.cs = 2 * 8;
task->tss.ss = 1 * 8;
task->tss.ds = 1 * 8;
task->tss.fs = 1 * 8;
task->tss.gs = 1 * 8;
*((int *) (task->tss.esp + 4)) = (int) sht;
*((int *) (task->tss.esp + 8)) = memtotal;
task_run(task, 2, 2); /* level=2, priority=2 */
sht->task = task;
sht->flags |= 0x20; /* カーソルあり */
fifo32_init(&task->fifo, 128, cons_fifo, task);
return sht;
}
开发者ID:FuDesign2008，项目名称:mess，代码行数:27，代码来源:bootpack.c
示例2: sheet_alloc
struct SHEET *open_console(struct SHTCTL *shtctl, unsigned int memtotal)
{
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
struct SHEET *sht = sheet_alloc(shtctl);
unsigned char *buf = (unsigned char *) memman_alloc_4k(memman, 256 * 165);
sheet_setbuf(sht, buf, 256, 165, -1); /* 透明色なし */
make_window8(buf, 256, 165, "console", 0);
make_textbox8(sht, 8, 28, 240, 128, COL8_000000);
sht->task = open_constask(sht, memtotal);
sht->flags |= 0x20; /* カーソルあり */
return sht;
}
开发者ID:msyksphinz，项目名称:sicp_exercise，代码行数:12，代码来源:bootpack.c
示例3: task_now
int *hrb_api(int edi, int esi, int ebp, int esp, int ebx, int edx, int ecx, int eax)
{
int ds_base = *((int *) 0xfe8);
struct TASK *task = task_now();
struct CONSOLE *cons = (struct CONSOLE *) *((int *) 0x0fec);
struct SHTCTL *shtctl = (struct SHTCTL *) *((int *) 0x0fe4);
struct SHEET *sht;
int *reg = &eax + 1; /* eaxの次の番地 */
/* 保存のためのPUSHADを強引に書き換える */
/* reg[0] : EDI, reg[1] : ESI, reg[2] : EBP, reg[3] : ESP */
/* reg[4] : EBX, reg[5] : EDX, reg[6] : ECX, reg[7] : EAX */
if (edx == 1) {
cons_putchar(cons, eax & 0xff, 1);
} else if (edx == 2) {
cons_putstr0(cons, (char *) ebx + ds_base);
} else if (edx == 3) {
cons_putstr1(cons, (char *) ebx + ds_base, ecx);
} else if (edx == 4) {
return &(task->tss.esp0);
} else if (edx == 5) {
sht = sheet_alloc(shtctl);
sheet_setbuf(sht, (char *) ebx + ds_base, esi, edi, eax);
make_window8((char *) ebx + ds_base, esi, edi, (char *) ecx + ds_base, 0);
sheet_slide(sht, 100, 50);
sheet_updown(sht, 3); /* 3という高さはtask_aの上 */
reg[7] = (int) sht;
} else if (edx == 6) {
sht = (struct SHEET *) ebx;
putfonts8_asc(sht->buf, sht->bxsize, esi, edi, eax, (char *) ebp + ds_base);
sheet_refresh(sht, esi, edi, esi + ecx * 8, edi + 16);
} else if (edx == 7) {
sht = (struct SHEET *) ebx;
boxfill8(sht->buf, sht->bxsize, ebp, eax, ecx, esi, edi);
sheet_refresh(sht, eax, ecx, esi + 1, edi + 1);
} else if (edx == 8) {
memman_init((struct MEMMAN *) (ebx + ds_base));
ecx &= 0xfffffff0; /* 16バイト単位に */
memman_free((struct MEMMAN *) (ebx + ds_base), eax, ecx);
} else if (edx == 9) {
ecx = (ecx + 0x0f) & 0xfffffff0; /* 16バイト単位に切り上げ */
reg[7] = memman_alloc((struct MEMMAN *) (ebx + ds_base), ecx);
} else if (edx == 10) {
ecx = (ecx + 0x0f) & 0xfffffff0; /* 16バイト単位に切り上げ */
memman_free((struct MEMMAN *) (ebx + ds_base), eax, ecx);
} else if (edx == 11) {
sht = (struct SHEET *) ebx;
sht->buf[sht->bxsize * edi + esi] = eax;
sheet_refresh(sht, esi, edi, esi + 1, edi + 1);
}
return 0;
}
开发者ID:ymkjp，项目名称:home-made-os，代码行数:52，代码来源:console.c
示例4: HariMain
void HariMain(void)
{
struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
char s[40], keybuf[32], mousebuf[128];
int mx, my, i;
unsigned int memtotal;
struct MOUSE_DEC mdec;
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
struct SHTCTL *shtctl;
struct SHEET *sht_back, *sht_mouse;
unsigned char *buf_back, buf_mouse[256];
init_gdtidt();
init_pic();
io_sti(); /* GDT,IDT,PIC*/
fifo8_init(&keyfifo, 32, keybuf);
fifo8_init(&mousefifo, 128, mousebuf);
io_out8(PIC0_IMR, 0xf9); // 11111001,PIC1和IRQ1,
io_out8(PIC1_IMR, 0xef); // 11101111, IRQ12
init_keyboard();
enable_mouse(&mdec);
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init(memman);
memman_free(memman, 0x00001000, 0x0009e000);
memman_free(memman, 0x00400000, memtotal - 0x00400000);
init_palette();
shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
sht_back = sheet_alloc(shtctl);
sht_mouse = sheet_alloc(shtctl);
buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1);
sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
init_screen8(buf_back, binfo->scrnx, binfo->scrny);
init_mouse_cursor8(buf_mouse, 99);
sheet_slide(sht_back, 0, 0);
mx = (binfo->scrnx - 16) / 2;
my = (binfo->scrny - 28 - 16) / 2;
sheet_slide(sht_mouse, mx, my);
sheet_updown(sht_back, 0);
sheet_updown(sht_mouse, 1);
sprintf(s, "(0x%x, 0x%x)", mx, my);
putfonts8_asc(buf_back, binfo->scrnx, 0, 0, COL8_FFFFFF, s);
sprintf(s, "memory 0x%xMB, free : 0x%xKB", memtotal / (1024 * 1024), memman_total(memman) / 1024);
putfonts8_asc(buf_back, binfo->scrnx, 0, 32, COL8_FFFFFF, s);
sheet_refresh(sht_back, 0, 0, binfo->scrnx, 48);
for(;;) {
io_cli();
if(0 == fifo8_status(&keyfifo) + fifo8_status(&mousefifo)) {
io_stihlt();
} else {
if(0 != fifo8_status(&keyfifo)) {
i = fifo8_get(&keyfifo);
io_sti();
sprintf(s, "0x%x", i);
boxfill8(buf_back, binfo->scrnx, COL8_008484, 0, 16, 8 * 8 - 1, 31);
putfonts8_asc(buf_back, binfo->scrnx, 0, 16, COL8_FFFFFF, s);
sheet_refresh(sht_back, 0, 16, 8 * 8, 32);
} else if (0 != fifo8_status(&mousefifo)) {
i = fifo8_get(&mousefifo);
io_sti();
if (0 != mouse_decode(&mdec, i)) {
sprintf(s, "[lcr 0x%x 0x%x 0x%x]", mdec.buf[0], mdec.buf[1], mdec.buf[2]);
if (0 != (mdec.btn & 0x01)) {
s[1] = 'L';
}
if (0 != (mdec.btn & 0x02)) {
s[3] = 'R';
}
if (0 != (mdec.btn & 0x04)) {
s[2] = 'C';
}
boxfill8(buf_back, binfo->scrnx, COL8_008484, 64, 16, 64 + 24 * 8 - 1, 31);
putfonts8_asc(buf_back, binfo->scrnx, 64, 16, COL8_FFFFFF, s);
sheet_refresh(sht_back, 64, 16, 64 + 24 * 8, 32);
mx += mdec.x;
my += mdec.y;
if (mx < 0) {
mx = 0;
}
if (my < 0) {
my = 0;
}
if (mx > binfo->scrnx - 1) {
mx = binfo->scrnx - 1;
}
if (my > binfo->scrny - 1) {
my = binfo->scrny - 1;
}
sprintf(s, "(0x%x, 0x%x)", mx, my);
boxfill8(buf_back, binfo->scrnx, COL8_008484, 0, 0, 8 * 16 - 1, 15); /* 隐藏坐标*/
putfonts8_asc(buf_back, binfo->scrnx, 0, 0, COL8_FFFFFF, s); /* 显示坐标*/
sheet_refresh(sht_back, 0, 0, 8 * 16, 16);
sheet_slide(sht_mouse, mx, my); /* 显示鼠标 */
}
}
//.........这里部分代码省略.........
开发者ID:passengerxlt，项目名称:30OS_Ubuntu，代码行数:101，代码来源:bootpack.c
示例5: HariMain
void HariMain(void)
{
struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
char s[40], keybuf[32], mousebuf[128];
int mx, my, i;
unsigned int memtotal, count = 0;
struct MOUSE_DEC mdec;
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
struct SHTCTL *shtctl;
struct SHEET *sht_back, *sht_mouse, *sht_win;
unsigned char *buf_back, buf_mouse[256], *buf_win;
init_gdtidt();
init_pic();
io_sti(); /* IDT/PICの初期化が終わったのでCPUの割り込み禁止を解除 */
fifo8_init(&keyfifo, 32, keybuf);
fifo8_init(&mousefifo, 128, mousebuf);
io_out8(PIC0_IMR, 0xf9); /* PIC1とキーボードを許可(11111001) */
io_out8(PIC1_IMR, 0xef); /* マウスを許可(11101111) */
init_keyboard();
enable_mouse(&mdec);
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init(memman);
memman_free(memman, 0x00001000, 0x0009e000); /* 0x00001000 - 0x0009efff */
memman_free(memman, 0x00400000, memtotal - 0x00400000);
init_palette();
shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
sht_back = sheet_alloc(shtctl);
sht_mouse = sheet_alloc(shtctl);
sht_win = sheet_alloc(shtctl);
buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
buf_win = (unsigned char *) memman_alloc_4k(memman, 160 * 52);
sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); /* 透明色なし */
sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
sheet_setbuf(sht_win, buf_win, 160, 52, -1); /* 透明色なし */
init_screen8(buf_back, binfo->scrnx, binfo->scrny);
init_mouse_cursor8(buf_mouse, 99);
make_window8(buf_win, 160, 52, "counter");
sheet_slide(sht_back, 0, 0);
mx = (binfo->scrnx - 16) / 2; /* 画面中央になるように座標計算 */
my = (binfo->scrny - 28 - 16) / 2;
sheet_slide(sht_mouse, mx, my);
sheet_slide(sht_win, 80, 72);
sheet_updown(sht_back, 0);
sheet_updown(sht_win, 1);
sheet_updown(sht_mouse, 2);
sprintf(s, "(%3d, %3d)", mx, my);
putfonts8_asc(buf_back, binfo->scrnx, 0, 0, COL8_FFFFFF, s);
sprintf(s, "memory %dMB free : %dKB",
memtotal / (1024 * 1024), memman_total(memman) / 1024);
putfonts8_asc(buf_back, binfo->scrnx, 0, 32, COL8_FFFFFF, s);
sheet_refresh(sht_back, 0, 0, binfo->scrnx, 48);
for (;;) {
count++;
sprintf(s, "%010d", count);
boxfill8(buf_win, 160, COL8_C6C6C6, 40, 28, 119, 43);
putfonts8_asc(buf_win, 160, 40, 28, COL8_000000, s);
sheet_refresh(sht_win, 40, 28, 120, 44);
io_cli();
if (fifo8_status(&keyfifo) + fifo8_status(&mousefifo) == 0) {
io_sti();
} else {
if (fifo8_status(&keyfifo) != 0) {
i = fifo8_get(&keyfifo);
io_sti();
sprintf(s, "%02X", i);
boxfill8(buf_back, binfo->scrnx, COL8_008484, 0, 16, 15, 31);
putfonts8_asc(buf_back, binfo->scrnx, 0, 16, COL8_FFFFFF, s);
sheet_refresh(sht_back, 0, 16, 16, 32);
} else if (fifo8_status(&mousefifo) != 0) {
i = fifo8_get(&mousefifo);
io_sti();
if (mouse_decode(&mdec, i) != 0) {
/* データが3バイト揃ったので表示 */
sprintf(s, "[lcr %4d %4d]", mdec.x, mdec.y);
if ((mdec.btn & 0x01) != 0) {
s[1] = 'L';
}
if ((mdec.btn & 0x02) != 0) {
s[3] = 'R';
}
if ((mdec.btn & 0x04) != 0) {
s[2] = 'C';
}
boxfill8(buf_back, binfo->scrnx, COL8_008484, 32, 16, 32 + 15 * 8 - 1, 31);
putfonts8_asc(buf_back, binfo->scrnx, 32, 16, COL8_FFFFFF, s);
sheet_refresh(sht_back, 32, 16, 32 + 15 * 8, 32);
/* マウスカーソルの移動 */
mx += mdec.x;
my += mdec.y;
if (mx < 0) {
mx = 0;
}
if (my < 0) {
my = 0;
}
//.........这里部分代码省略.........
开发者ID:siutin，项目名称:self_os，代码行数:101，代码来源:bootpack.c
示例6: HariMain
void HariMain(void)
{
struct BOOTINFO *binfo = (struct BOOTINFO *) 0x0ff0;//the boot info saved in asmhead
char s[40];
int mx, my, i, cursor_x, cursor_c;
unsigned int memtotal;
struct MOUSE_DEC mdec;
//内存管理结构地址
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
struct SHTCTL *shtctl;
static char keytable0[0x80] = {
0, 0, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0, 0, ']', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', ',', '.', '/', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0x5c, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x5c, 0, 0
};
static char keytable1[0x80] = {
0, 0, '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0, 0, '}', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', '<', '>', '?', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, '_', 0, 0, 0, 0, 0, 0, 0, 0, 0, '|', 0, 0
};
unsigned char *buf_back, buf_mouse[256], *buf_win, *buf_win_b, *buf_cons;
struct SHEET *sht_back, *sht_mouse, *sht_win, *sht_win_b[3], *sht_cons;
struct TASK *task_a, *task_b[3], *task_cons;
struct TIMER *timer;
int key_to = 0, key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;
struct FIFO32 fifo, keycmd;
int fifobuf[128], keycmd_buf[32];
init_gdtidt();
init_pic();//init the programed interrupt controller.
io_sti(); // enable interrupt
fifo32_init(&fifo, 128, fifobuf, 0);//初始化队列
init_pit();//初始化计时器;
init_keyboard(&fifo, 256);
enable_mouse(&fifo, 512, &mdec);//鼠标中断
io_out8(PIC0_IMR, 0xf8); /* PIC1 允许 0(timer),1,2号中断，屏蔽其他(11111000) */
io_out8(PIC1_IMR, 0xef); /* 允许c号中断，屏蔽其他(11101111) */
fifo32_init(&keycmd, 32, keycmd_buf, 0);
//内存管理初始化
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init(memman);
memman_free(memman, 0x00001000, 0x0009e000); /* 0x00001000 - 0x0009efff */
memman_free(memman, 0x00400000, memtotal - 0x00400000);
init_palette(); //调色板
shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);//对图层管理结构体的初始化
task_a = task_init(memman);
fifo.task = task_a;
task_run(task_a,1,0);
*((int *) 0x0fe4) = (int) shtctl;
/* sht_back */
sht_back = sheet_alloc(shtctl);
buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); /* 无透明色 */
/*桌面先显示到内存中*/
init_screen8(buf_back, binfo->scrnx, binfo->scrny);
/* sht_cons */
sht_cons = sheet_alloc(shtctl);
buf_cons = (unsigned char *) memman_alloc_4k(memman, 256 * 165);
sheet_setbuf(sht_cons, buf_cons, 256, 165, -1); /* 摟柧怓側偟 */
make_window8(buf_cons, 256, 165, "console", 0);
make_textbox8(sht_cons, 8, 28, 240, 128, COL8_000000);
task_cons = task_alloc();
task_cons->tss.esp = memman_alloc_4k(memman, 64 * 1024) + 64 * 1024 - 12;
task_cons->tss.eip = (int) &console_task;
task_cons->tss.es = 1 * 8;
task_cons->tss.cs = 2 * 8;
task_cons->tss.ss = 1 * 8;
task_cons->tss.ds = 1 * 8;
task_cons->tss.fs = 1 * 8;
task_cons->tss.gs = 1 * 8;
*((int *) (task_cons->tss.esp + 4)) = (int) sht_cons;
*((int *) (task_cons->tss.esp + 8)) = memtotal;
task_run(task_cons, 2, 2); /* level=2, priority=2 */
/* sht_mouse */
sht_mouse = sheet_alloc(shtctl);
sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
/*鼠标显示到内存中*/
init_mouse_cursor8(buf_mouse, 99);
mx = (binfo->scrnx - 16) / 2; /* 夋柺拞墰偵側傞傛偆偵嵗昗寁嶼 */
//.........这里部分代码省略.........
开发者ID:BpLife，项目名称:myos，代码行数:101，代码来源:bootpack.c
示例7: main
void main(){
struct BOOTINFO *binfo;
struct FIFO32 fifo;
binfo = (struct BOOTINFO *) ADR_BOOTINFO;
char s[MAX_LENGTH];
char mcursor[256];
// mouse and keyboard data
int fifobuf[BUF_LEN];
struct TIMER *timer, *timer2, *timer3;
int fifo_data;
struct MOUSE_DEC mdec;
int mx,my;
// memory manager
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
unsigned int memtotal;
// overlay control
struct SHTCTL *shtctl;
struct SHEET *sht_win, *sht_mouse;
unsigned char *buf_back, buf_mouse[256];
unsigned char *buf_win;
// gdt control
init_gdtidt();
init_pic();
init_pit();
_io_sti();
// init fifo
fifo32_init(&fifo, BUF_LEN, fifobuf);
init_keyboard(&fifo, 256);
enable_mouse(&fifo, 512, &mdec);
timer = timer_alloc();
timer_init(timer, &fifo, 10);
timer_settime(timer, 1000);
timer2 = timer_alloc();
timer_init(timer2, &fifo, 3);
timer_settime(timer2, 300);
timer3 = timer_alloc();
timer_init(timer3,&fifo, 1);
timer_settime(timer3, 50);
// must after init pit
// qemu 1000 = 10s
// bochs 1000 = 1s
_io_out8(PIC0_IMR,0xf8);
_io_out8(PIC1_IMR,0xef);
// mouse and keyboard control
// memory set
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init(memman);
// this is ERROR!
// c400 is system
memman_free(memman, 0x00400000, memtotal - 0x00400000);
/**************************************************
* screen
* ----------------------------------------------*/
// video initialize
init_palette();
shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
sht_back = sheet_alloc(shtctl); // background sheet
sht_mouse = sheet_alloc(shtctl); // mouse sheet
sht_win = sheet_alloc(shtctl);
buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny); // background buffer
buf_win = (unsigned char *) memman_alloc_4k(memman,160*52);
sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); // bind buf
sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
sheet_setbuf(sht_win, buf_win, 160, 52, -1);
init_screen(buf_back, binfo->scrnx, binfo->scrny); // init color
init_mouse_cursor8(buf_mouse, 99);
make_window8(buf_win, 160, 52, "counter");
// init slide
sheet_slide(sht_back, 0, 0);
// initial mouse position
mx = (binfo->scrnx - 16) / 2;
my = (binfo->scrny - 28 - 16) / 2;
//.........这里部分代码省略.........
开发者ID:SwordYork，项目名称:slef，代码行数:101，代码来源:init.c
示例8: HariMain
void HariMain(void)
{
struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
struct SHTCTL *shtctl;
char s[40];
struct FIFO32 fifo, keycmd;
int fifobuf[128], keycmd_buf[32];
int mx, my, i, new_mx = -1, new_my = 0, new_wx = 0x7fffffff, new_wy = 0;
unsigned int memtotal;
struct MOUSE_DEC mdec;
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
unsigned char *buf_back, buf_mouse[256];
struct SHEET *sht_back, *sht_mouse;
struct TASK *task_a, *task;
static char keytable0[0x80] = {
0, 0, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0x08, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0x0a, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0, 0, ']', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', ',', '.', '/', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0x5c, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x5c, 0, 0
};
static char keytable1[0x80] = {
0, 0, '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0x08, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0x0a, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0, 0, '}', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', '<', '>', '?', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, '_', 0, 0, 0, 0, 0, 0, 0, 0, 0, '|', 0, 0
};
int key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;
int j, x, y, mmx = -1, mmy = -1, mmx2 = 0;
struct SHEET *sht = 0, *key_win;
init_gdtidt();
init_pic();
io_sti(); /* IDT/PICの初期化が終わったのでCPUの割り込み禁止を解除 */
fifo32_init(&fifo, 128, fifobuf, 0);
*((int *) 0x0fec) = (int) &fifo;
init_pit();
init_keyboard(&fifo, 256);
enable_mouse(&fifo, 512, &mdec);
io_out8(PIC0_IMR, 0xf8); /* PITとPIC1とキーボードを許可(11111000) */
io_out8(PIC1_IMR, 0xef); /* マウスを許可(11101111) */
fifo32_init(&keycmd, 32, keycmd_buf, 0);
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init(memman);
memman_free(memman, 0x00001000, 0x0009e000); /* 0x00001000 - 0x0009efff */
memman_free(memman, 0x00400000, memtotal - 0x00400000);
init_palette();
shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
task_a = task_init(memman);
fifo.task = task_a;
task_run(task_a, 1, 2);
*((int *) 0x0fe4) = (int) shtctl;
/* sht_back */
sht_back = sheet_alloc(shtctl);
buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); /* 透明色なし */
init_screen8(buf_back, binfo->scrnx, binfo->scrny);
/* sht_cons */
key_win = open_console(shtctl, memtotal);
/* sht_mouse */
sht_mouse = sheet_alloc(shtctl);
sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
init_mouse_cursor8(buf_mouse, 99);
mx = (binfo->scrnx - 16) / 2; /* 画面中央になるように座標計算 */
my = (binfo->scrny - 28 - 16) / 2;
sheet_slide(sht_back, 0, 0);
sheet_slide(key_win, 32, 4);
sheet_slide(sht_mouse, mx, my);
sheet_updown(sht_back, 0);
sheet_updown(key_win, 1);
sheet_updown(sht_mouse, 2);
keywin_on(key_win);
/* 最初にキーボード状態との食い違いがないように、設定しておくことにする */
fifo32_put(&keycmd, KEYCMD_LED);
fifo32_put(&keycmd, key_leds);
for (;;) {
if (fifo32_status(&keycmd) > 0 && keycmd_wait < 0) {
/* キーボードコントローラに送るデータがあれば、送る */
keycmd_wait = fifo32_get(&keycmd);
wait_KBC_sendready();
io_out8(PORT_KEYDAT, keycmd_wait);
}
io_cli();
if (fifo32_status(&fifo) == 0) {
/* FIFOがからっぽになったので、保留している描画があれば実行する */
//.........这里部分代码省略.........
开发者ID:FuDesign2008，项目名称:mess，代码行数:101，代码来源:bootpack.c
示例9: HariMain
void HariMain(void)
{
int i;
int mmx = -1, mmy = -1, mmx2 = 0;
struct SHEET *sht = 0, *key_win;
struct BOOTINFO *binfo = (struct BOOTINFO *)0x0ff0;
int xsize = (*binfo).scrnx;
int ysize = (*binfo).scrny;
int mx = xsize/2;
int my = ysize/2;
int new_mx = -1, new_my = 0, new_wx = 0x7fffffff, new_wy = 0;
int fifobuf[128], keycmd_buf[32], *cons_fifo[2];
struct MOUSE_DEC mdec;
unsigned char s[32];
unsigned int memtotal;
struct MEMMAN *memman = (struct MEMMAN *)MEMMAN_ADDR;
int key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;
struct SHTCTL *shtctl;
struct SHEET *sht_back, *sht_mouse;
unsigned char *buf_back, buf_mouse[256], *buf_cons[2];
struct TIMER *timer;
struct FIFO32 fifo, keycmd;
struct TASK *task_a, *task_cons[2];
static char keytable0[0x80] = {
0, 0, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0x08, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0x0a, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0, 0, ']', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', ',', '.', '/', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0x5c, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x5c, 0, 0
};
static char keytable1[0x80] = {
0, 0, '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0x08, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0x0a, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0, 0, '}', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', '<', '>', '?', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, '_', 0, 0, 0, 0, 0, 0, 0, 0, 0, '|', 0, 0
};
init_gdtidt ();
init_pic ();
io_sti ();
fifo32_init(&fifo, 32, fifobuf, 0);
fifo32_init(&keycmd, 32, keycmd_buf, 0);
init_pit();
io_out8(PIC0_IMR, 0xf8); /* Allow PIT and Keyboard (11111000) */
io_out8(PIC1_IMR, 0xef); /* Allow Mouse (11101111) */
init_keyboard (&fifo, 256);
enable_mouse (&fifo, 512, &mdec);
timer = timer_alloc();
timer_init(timer, &fifo, 1);
timer_settime(timer, 50);
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init (memman);
memman_free (memman, 0x00001000, 0x009e000); /* 0x00001000 - 0x0009efff */
memman_free (memman, 0x00400000, memtotal - 0x00400000);
init_pallete();
shtctl = shtctl_init (memman, binfo->vram, binfo->scrnx, binfo->scrny);
sht_back = sheet_alloc(shtctl);
sht_mouse = sheet_alloc(shtctl);
buf_back = (unsigned char *)memman_alloc_4k (memman, binfo->scrnx * binfo->scrny);
sheet_setbuf (sht_back, buf_back, binfo->scrnx, binfo->scrny, -1);
sheet_setbuf (sht_mouse, buf_mouse, 16, 16, 99);
init_screen (buf_back, xsize, ysize);
init_mouse_cursor8 (buf_mouse, 99);
*((int *) 0x0fec) = (int) &fifo;
//=====================
// Task Settings
//=====================
task_a = task_init(memman);
fifo.task = task_a;
task_run (task_a, 1, 0);
/* console sheet */
key_win = open_console (shtctl, memtotal);
//=======================
// Sheet Setting
//=======================
*((int *) 0x0fe4) = (int) shtctl;
sheet_slide (sht_back, 0, 0);
sheet_slide (key_win, 32, 4);
sheet_slide (sht_mouse, mx, my);
//.........这里部分代码省略.........
开发者ID:msyksphinz，项目名称:sicp_exercise，代码行数:101，代码来源:bootpack.c
示例10: HariMain
void HariMain(void)
{
struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
struct FIFO32 fifo;
char s[40];
int fifobuf[128];
struct TIMER *timer, *timer2, *timer3;
int mx, my, i, cursor_x, cursor_c, task_b_esp;
unsigned int memtotal;
struct MOUSE_DEC mdec;
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
struct SHTCTL *shtctl;
struct SHEET *sht_back, *sht_mouse, *sht_win;
unsigned char *buf_back, buf_mouse[256], *buf_win;
static char keytable[0x54] = {
0, 0, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0, 0, ']', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', ',', '.', '/', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.'
};
struct TSS32 tss_a, tss_b;
struct SEGMENT_DESCRIPTOR *gdt = (struct SEGMENT_DESCRIPTOR *) ADR_GDT;
init_gdtidt();
init_pic();
io_sti();
fifo32_init(&fifo, 128, fifobuf);
init_pit();
init_keyboard(&fifo, 256);
enable_mouse(&fifo, 512, &mdec);
io_out8(PIC0_IMR, 0xf8);
io_out8(PIC1_IMR, 0xef);
timer = timer_alloc();
timer_init(timer, &fifo, 10);
timer_settime(timer, 1000);
timer2 = timer_alloc();
timer_init(timer2, &fifo, 3);
timer_settime(timer2, 300);
timer3 = timer_alloc();
timer_init(timer3, &fifo, 1);
timer_settime(timer3, 50);
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init(memman);
memman_free(memman, 0x00001000, 0x0009e000);
memman_free(memman, 0x00400000, memtotal - 0x00400000);
init_palette();
shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
sht_back = sheet_alloc(shtctl);
sht_mouse = sheet_alloc(shtctl);
sht_win = sheet_alloc(shtctl);
buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
buf_win = (unsigned char *) memman_alloc_4k(memman, 160 * 52);
sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1);
sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
sheet_setbuf(sht_win, buf_win, 160, 52, -1);
init_screen8(buf_back, binfo->scrnx, binfo->scrny);
init_mouse_cursor8(buf_mouse, 99);
make_window8(buf_win, 160, 52, "window");
make_textbox8(sht_win, 8, 28, 144, 16, COL8_FFFFFF);
cursor_x = 8;
cursor_c = COL8_FFFFFF;
sheet_slide(sht_back, 0, 0);
mx = (binfo->scrnx - 16) / 2;
my = (binfo->scrny - 28 - 16) / 2;
sheet_slide(sht_mouse, mx, my);
sheet_slide(sht_win, 80, 72);
sheet_updown(sht_back, 0);
sheet_updown(sht_win, 1);
sheet_updown(sht_mouse, 2);
sprintf(s, "(%3d, %3d)", mx, my);
putfonts8_asc_sht(sht_back, 0, 0, COL8_FFFFFF, COL8_008484, s, 10);
sprintf(s, "memory %dMB free : %dKB" ,
memtotal / (1024 * 1024), memman_total(memman) / 1024);
putfonts8_asc_sht(sht_back, 0, 32, COL8_FFFFFF, COL8_008484, s, 40);
tss_a.ldtr = 0;
tss_a.iomap = 0x40000000;
tss_b.ldtr = 0;
tss_b.iomap = 0x40000000;
set_segmdesc(gdt + 3, 103, (int) &tss_a, AR_TSS32);
set_segmdesc(gdt + 4, 103, (int) &tss_b, AR_TSS32);
load_tr(3 * 8);
task_b_esp = memman_alloc_4k(memman, 64 * 1024) + 64 * 1024;
tss_b.eip = (int) &task_b_main;
tss_b.eflags = 0x00000202;
tss_b.eax = 0;
tss_b.ecx = 0;
tss_b.edx = 0;
tss_b.ebx = 0;
tss_b.esp = task_b_esp;
tss_b.ebp = 0;
tss_b.esi = 0;
tss_b.edi = 0;
tss_b.es = 1 * 8;
tss_b.cs = 2 * 8;
//.........这里部分代码省略.........
开发者ID:LinuxKernelDevelopment，项目名称:30，代码行数:101，代码来源:bootpack.c
示例11: task_now
int *hrb_api(int edi, int esi, int ebp, int esp, int ebx, int edx, int ecx, int eax)
{
struct TASK *task = task_now();
int ds_base = task->ds_base;
struct CONSOLE *cons = task->cons;
struct SHTCTL *shtctl = (struct SHTCTL *) *((int *) 0x0fe4);
struct SHEET *sht;
struct FIFO32 *sys_fifo = (struct FIFO32 *) *((int *) 0x0fec);
int *reg = &eax + 1; /* eaxの次の番地 */
/* 保存のためのPUSHADを強引に書き換える */
/* reg[0] : EDI, reg[1] : ESI, reg[2] : EBP, reg[3] : ESP */
/* reg[4] : EBX, reg[5] : EDX, reg[6] : ECX, reg[7] : EAX */
int i;
struct FILEINFO *finfo;
struct FILEHANDLE *fh;
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
if (edx == 1) {
cons_putchar(cons, eax & 0xff, 1);
} else if (edx == 2) {
cons_putstr0(cons, (char *) ebx + ds_base);
} else if (edx == 3) {
cons_putstr1(cons, (char *) ebx + ds_base, ecx);
} else if (edx == 4) {
return &(task->tss.esp0);
} else if (edx == 5) {
sht = sheet_alloc(shtctl);
sht->task = task;
sht->flags |= 0x10;
sheet_setbuf(sht, (char *) ebx + ds_base, esi, edi, eax);
make_window8((char *) ebx + ds_base, esi, edi, (char *) ecx + ds_base, 0);
sheet_slide(sht, ((shtctl->xsize - esi) / 2) & ~3, (shtctl->ysize - edi) / 2);
sheet_updown(sht, shtctl->top); /* 今のマウスと同じ高さになるように指定： マウスはこの上になる */
reg[7] = (int) sht;
} else if (edx == 6) {
sht = (struct SHEET *) (ebx & 0xfffffffe);
putfonts8_asc(sht->buf, sht->bxsize, esi, edi, eax, (char *) ebp + ds_base);
if ((ebx & 1) == 0) {
sheet_refresh(sht, esi, edi, esi + ecx * 8, edi + 16);
}
} else if (edx == 7) {
sht = (struct SHEET *) (ebx & 0xfffffffe);
boxfill8(sht->buf, sht->bxsize, ebp, eax, ecx, esi, edi);
if ((ebx & 1) == 0) {
sheet_refresh(sht, eax, ecx, esi + 1, edi + 1);
}
} else if (edx == 8) {
memman_init((struct MEMMAN *) (ebx + ds_base));
ecx &= 0xfffffff0; /* 16バイト単位に */
memman_free((struct MEMMAN *) (ebx + ds_base), eax, ecx);
} else if (edx == 9) {
ecx = (ecx + 0x0f) & 0xfffffff0; /* 16バイト単位に切り上げ */
reg[7] = memman_alloc((struct MEMMAN *) (ebx + ds_base), ecx);
} else if (edx == 10) {
ecx = (ecx + 0x0f) & 0xfffffff0; /* 16バイト単位に切り上げ */
memman_free((struct MEMMAN *) (ebx + ds_base), eax, ecx);
} else if (edx == 11) {
sht = (struct SHEET *) (ebx & 0xfffffffe);
sht->buf[sht->bxsize * edi + esi] = eax;
if ((ebx & 1) == 0) {
sheet_refresh(sht, esi, edi, esi + 1, edi + 1);
}
} else if (edx == 12) {
sht = (struct SHEET *) ebx;
sheet_refresh(sht, eax, ecx, esi, edi);
} else if (edx == 13) {
sht = (struct SHEET *) (ebx & 0xfffffffe);
hrb_api_linewin(sht, eax, ecx, esi, edi, ebp);
if ((ebx & 1) == 0) {
sheet_refresh(sht, eax, ecx, esi + 1, edi + 1);
}
} else if (edx == 14) {
sheet_free((struct SHEET *) ebx);
} else if (edx == 15) {
for (;;) {
io_cli();
if (fifo32_status(&task->fifo) == 0) {
if (eax != 0) {
task_sleep(task); /* FIFOが空なので寝て待つ */
} else {
io_sti();
reg[7] = -1;
return 0;
}
}
i = fifo32_get(&task->fifo);
io_sti();
if (i <= 1 && cons->sht != 0) { /* カーソル用タイマ */
/* アプリ実行中はカーソルが出ないので、いつも次は表示用の1を注文しておく */
timer_init(cons->timer, &task->fifo, 1); /* 次は1を */
timer_settime(cons->timer, 50);
}
if (i == 2) { /* カーソルON */
cons->cur_c = COL8_FFFFFF;
}
if (i == 3) { /* カーソルOFF */
cons->cur_c = -1;
}
if (i == 4) { /* コンソールだけを閉じる */
timer_cancel(cons->timer);
//.........这里部分代码省略.........
开发者ID:bigpussy，项目名称:harib_os_src，代码行数:101，代码来源:console.c
示例12: HariMain
void HariMain(void)
{
struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
struct FIFO32 fifo;
char s[40];
int fifobuf[128];
struct TIMER *timer, *timer2, *timer3;
int mx, my, i;
unsigned int memtotal;
struct MOUSE_DEC mdec;
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
struct SHTCTL *shtctl;
struct SHEET *sht_back, *sht_mouse, *sht_win;
unsigned char *buf_back, buf_mouse[256], *buf_win;
init_gdtidt();
init_pic();
io_sti(); /* IDT/PICの初期化が終わったのでCPUの割り込み禁止を解除 */
fifo32_init(&fifo, 128, fifobuf);
init_pit();
init_keyboard(&fifo, 256);
enable_mouse(&fifo, 512, &mdec);
io_out8(PIC0_IMR, 0xf8); /* PITとPIC1とキーボードを許可(11111000) */
io_out8(PIC1_IMR, 0xef); /* マウスを許可(11101111) */
timer = timer_alloc();
timer_init(timer, &fifo, 10);
timer_settime(timer, 1000);
timer2 = timer_alloc();
timer_init(timer2, &fifo, 3);
timer_settime(timer2, 300);
timer3 = timer_alloc();
timer_init(timer3, &fifo, 1);
timer_settime(timer3, 50);
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init(memman);
memman_free(memman, 0x00001000, 0x0009e000); /* 0x00001000 - 0x0009efff */
memman_free(memman, 0x00400000, memtotal - 0x00400000);
init_palette();
shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
sht_back = sheet_alloc(shtctl);
sht_mouse = sheet_alloc(shtctl);
sht_win = sheet_alloc(shtctl);
buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
buf_win = (unsigned char *) memman_alloc_4k(memman, 160 * 52);
sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); /* 透明色なし */
sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
sheet_setbuf(sht_win, buf_win, 160, 52, -1); /* 透明色なし */
init_screen8(buf_back, binfo->scrnx, binfo->scrny);
init_mouse_cursor8(buf_mouse, 99);
make_window8(buf_win, 160, 52, "window");
sheet_slide(sht_back, 0, 0);
mx = (binfo->scrnx - 16) / 2; /* 画面中央になるように座標計算 */
my = (binfo->scrny - 28 - 16) / 2;
sheet_slide(sht_mouse, mx, my);
sheet_slide(sht_win, 80, 72);
sheet_updown(sht_back, 0);
sheet_updown(sht_win, 1);
sheet_updown(sht_mouse, 2);
sprintf(s, "(%3d, %3d)", mx, my);
putfonts8_asc_sht(sht_back, 0, 0, COL8_FFFFFF, COL8_008484, s, 10);
sprintf(s, "memory %dMB free : %dKB",
memtotal / (1024 * 1024), memman_total(memman) / 1024);
putfonts8_asc_sht(sht_back, 0, 32, COL8_FFFFFF, COL8_008484, s, 40);
for (;;) {
io_cli();
if (fifo32_status(&fifo) == 0) {
io_stihlt();
} else {
i = fifo32_get(&fifo);
io_sti();
if (256 <= i && i <= 511) { /* キーボードデータ */
sprintf(s, "%02X", i - 256);
putfonts8_asc_sht(sht_back, 0, 16, COL8_FFFFFF, COL8_008484, s, 2);
if (i == 0x1e + 256) {
putfonts8_asc_sht(sht_win, 40, 28, COL8_000000, COL8_C6C6C6, "A", 1);
}
} else if (512 <= i && i <= 767) { /* マウスデータ */
if (mouse_decode(&mdec, i - 512) != 0) {
/* データが3バイト揃ったので表示 */
sprintf(s, "[lcr %4d %4d]", mdec.x, mdec.y);
if ((mdec.btn & 0x01) != 0) {
s[1] = 'L';
}
if ((mdec.btn & 0x02) != 0) {
s[3] = 'R';
}
if ((mdec.btn & 0x04) != 0) {
s[2] = 'C';
}
putfonts8_asc_sht(sht_back, 32, 16, COL8_FFFFFF, COL8_008484, s, 15);
/* マウスカーソルの移動 */
mx += mdec.x;
my += mdec.y;
if (mx < 0) {
mx = 0;
}
//.........这里部分代码省略.........
开发者ID:FuDesign2008，项目名称:mess，代码行数:101，代码来源:bootpack.c
示例13: HariMain
void HariMain(void)
{
struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
struct FIFO32 fifo, keycmd;
char s[40];
int fifobuf[128], keycmd_buf[32];
struct TIMER *timer;
int mx, my, i, cursor_x, cursor_c;
unsigned int memtotal;
struct MOUSE_DEC mdec;
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
struct SHTCTL *shtctl;
struct SHEET *sht_back, *sht_mouse, *sht_win, *sht_cons;
unsigned char *buf_back, buf_mouse[256], *buf_win, *buf_cons;
struct TASK *task_a, *task_cons;
int key_to = 0, key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;;
static char keytable0[0x80] = {
0, 0, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '=', 0, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '[', ']', 0, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', '\'','`', 0, '\\','Z', 'X', 'C', 'V',
'B', 'N', 'M', ',', '.', '/', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0x5c, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x5c, 0, 0
};
static char keytable1[0x80] = {
0, 0, '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', '_', '+', 0, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}', 0, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', '"', '~', 0, '|', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', '<', '>', '?', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, '_', 0, 0, 0, 0, 0, 0, 0, 0, 0, '|', 0, 0
};
init_gdtidt();
init_pic();
io_sti();
fifo32_init(&fifo, 128, fifobuf, 0);
fifo32_init(&keycmd, 32, keycmd_buf, 0);
init_pit();
init_keyboard(&fifo, 256);
enable_mouse(&fifo, 512, &mdec);
io_out8(PIC0_IMR, 0xf8);
io_out8(PIC1_IMR, 0xef);
memtotal = memtest(0x00400000, 0xbfffffff);
memman_init(memman);
memman_free(memman, 0x00001000, 0x0009e00);
memman_free(memman, 0x00400000, memtotal - 0x00400000);
init_palette();
shtctl = shtctl_init(memman, binfo->vram, binfo->scrnx, binfo->scrny);
task_a = task_init(memman);
fifo.task = task_a;
task_run(task_a, 1, 0);
/* sht_back */
sht_back = sheet_alloc(shtctl);
buf_back = (unsigned char *) memman_alloc_4k(memman, binfo->scrnx * binfo->scrny);
sheet_setbuf(sht_back, buf_back, binfo->scrnx, binfo->scrny, -1);
init_screen8(buf_back, binfo->scrnx, binfo->scrny);
/* sht_cons */
sht_cons = sheet_alloc(shtctl);
buf_cons = (unsigned char *) memman_alloc_4k(memman, 256 * 165);
sheet_setbuf(sht_cons, buf_cons, 256, 165, -1);
make_window8(buf_cons, 256, 165, "console", 0);
make_textbox8(sht_cons, 8, 28, 240, 128, COL8_000000);
task_cons = task_alloc();
task_cons->tss.esp = memman_alloc_4k(memman, 64 * 1024) + 64 * 1024 - 12;
task_cons->tss.eip = (int) &console_task;
task_cons->tss.es = 1 * 8;
task_cons->tss.cs = 2 * 8;
task_cons->tss.ss = 1 * 8;
task_cons->tss.ds = 1 * 8;
task_cons->tss.fs = 1 * 8;
task_cons->tss.gs = 1 * 8;
*((int *) (task_cons->tss.esp + 4)) = (int) sht_cons;
*((int *) (task_cons->tss.esp + 8)) = memtotal;
task_run(task_cons, 2, 2); /* level=2, priority=2 */
/* sht_win */
sht_win = sheet_alloc(shtctl);
buf_win = (unsigned char *) memman_alloc_4k(memman, 160*52);
sheet_setbuf(sht_win, buf_win, 144, 52, -1);
make_window8(buf_win, 144, 52, "task_a", 1);
make_textbox8(sht_win, 8, 28, 128, 16, COL8_FFFFFF);
cursor_x = 8;
cursor_c = COL8_FFFFFF;
timer = timer_alloc();
timer_init(timer, &fifo, 1);
timer_settime(timer, 50);
/* sht_mouse */
sht_mouse = sheet_alloc(shtctl);
sheet_setbuf(sht_mouse, buf_mouse, 16, 16, 99);
//.........这里部分代码省略.........
开发者ID:kissthink，项目名称:myOS，代码行数:101，代码来源:bootpack.c
示例14: HariMain
void HariMain(void)
{
struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
struct SHTCTL *shtctl;
char s[40];
struct FIFO32 fifo, keycmd;
int fifobuf[128], keycmd_buf[32];
int mx, my, i, cursor_x, cursor_c;
unsigned int memtotal;
struct MOUSE_DEC mdec;
struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
unsigned char *buf_back, buf_mouse[256], *buf_win, *buf_cons;
struct SHEET *sht_back, *sht_mouse, *sht_win, *sht_cons;
struct TASK *task_a, *task_cons;
struct TIMER *timer;
static char keytable0[0x80] = {
0, 0, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0, 0, ']', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', ',', '.', '/', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0x5c, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x5c, 0, 0
};
static char keytable1[0x80] = {
0, 0, '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0, 0,
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0, 0, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0, 0, '}', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', '<', '>', '?', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, '_', 0, 0, 0, 0, 0, 0, 0,
|
客服电话
APP下载
官方微信
请发表评论