C++ sf_debug_set_chart_event_thresholds函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sf_debug_set_chart_event_thresholds函数的典型用法代码示例。如果您正苦于以下问题：C++ sf_debug_set_chart_event_thresholds函数的具体用法？C++ sf_debug_set_chart_event_thresholds怎么用？C++ sf_debug_set_chart_event_thresholds使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sf_debug_set_chart_event_thresholds函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (_minimalist14MachineNumber_,
           1,
           1,
           1,
           3,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance.chartNumber),
           &(chartInstance.instanceNumber),
           ssGetPath(S),
           (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation(_minimalist14MachineNumber_,
            chartInstance.chartNumber);
          sf_debug_set_chart_disable_implicit_casting
            (_minimalist14MachineNumber_,chartInstance.chartNumber,1);
          sf_debug_set_chart_event_thresholds(_minimalist14MachineNumber_,
            chartInstance.chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,1,1,0,SF_UINT32,0,NULL,0,0,0,0.0,1.0,0,"numIter",
                              0,(MexFcnForType)c1_c_sf_marshall);
          _SFD_SET_DATA_PROPS(1,1,1,0,SF_UINT8,0,NULL,0,0,0,0.0,1.0,0,"value",0,
                              (MexFcnForType)c1_sf_marshall);

          {
            unsigned int dimVector[1];
            dimVector[0]= 37;
            _SFD_SET_DATA_PROPS(2,11,0,0,SF_UINT8,1,&(dimVector[0]),0,0,0,0.0,
                                1.0,0,"buffer_receive_nav_mode",0,(MexFcnForType)
                                c1_d_sf_marshall);
          }

          _SFD_STATE_INFO(0,0,0);
          _SFD_CH_SUBSTATE_COUNT(1);
          _SFD_CH_SUBSTATE_DECOMP(0);
          _SFD_CH_SUBSTATE_INDEX(0,0);
          _SFD_ST_SUBSTATE_COUNT(0,0);
        }

        _SFD_CV_INIT_CHART(1,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);
        _SFD_TRANS_COV_WTS(0,0,0,0,0);
        if (chartAlreadyPresent==0) {
          _SFD_TRANS_COV_MAPS(0,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              0,NULL,NULL);
        }

        {
          uint32_T *c1_numIter;
          uint8_T *c1_value;
          c1_value = (uint8_T *)ssGetInputPortSignal(chartInstance.S, 1);
          c1_numIter = (uint32_T *)ssGetInputPortSignal(chartInstance.S, 0);
          _SFD_SET_DATA_VALUE_PTR(0U, c1_numIter);
          _SFD_SET_DATA_VALUE_PTR(1U, c1_value);
          _SFD_SET_DATA_VALUE_PTR(2U,
            chartInstance.c1_buffer_receive_nav_mode_address);
        }
      }
    } else {
      sf_debug_reset_current_state_configuration(_minimalist14MachineNumber_,
        chartInstance.chartNumber,chartInstance.instanceNumber);
    }
  }
}

开发者ID:djulzz，项目名称:MPC-565，代码行数:87，代码来源:c1_minimalist14.c

示例2: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc11_Batman_CodeInstanceStruct *chartInstance;
    chartInstance = (SFc11_Batman_CodeInstanceStruct *) ((ChartInfoStruct *)
      (ssGetUserData(S)))->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (_Batman_CodeMachineNumber_,
           11,
           1,
           1,
           3,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           ssGetPath(S),
           (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation(_Batman_CodeMachineNumber_,
            chartInstance->chartNumber);
          sf_debug_set_chart_disable_implicit_casting(_Batman_CodeMachineNumber_,
            chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(_Batman_CodeMachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,1,1,0,"msg");
          _SFD_SET_DATA_PROPS(1,1,1,0,"cell_temperatures_in");
          _SFD_SET_DATA_PROPS(2,2,0,1,"cell_temperatures_out");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,0,0,0,0,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,529);
        _SFD_TRANS_COV_WTS(0,0,0,1,0);
        if (chartAlreadyPresent==0) {
          _SFD_TRANS_COV_MAPS(0,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              1,NULL,NULL,
                              0,NULL,NULL);
        }

        {
          unsigned int dimVector[1];
          dimVector[0]= 2;
          _SFD_SET_DATA_COMPILED_PROPS(0,SF_UINT32,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c11_b_sf_marshallOut,(MexInFcnForType)NULL);
        }

        {
          unsigned int dimVector[1];
          dimVector[0]= 12;
          _SFD_SET_DATA_COMPILED_PROPS(1,SF_UINT16,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c11_sf_marshallOut,(MexInFcnForType)NULL);
        }

        {
          unsigned int dimVector[1];
          dimVector[0]= 12;
          _SFD_SET_DATA_COMPILED_PROPS(2,SF_UINT16,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c11_sf_marshallOut,(MexInFcnForType)
            c11_sf_marshallIn);
        }

        {
          uint32_T (*c11_msg)[2];
          uint16_T (*c11_cell_temperatures_in)[12];
          uint16_T (*c11_cell_temperatures_out)[12];
          c11_cell_temperatures_out = (uint16_T (*)[12])ssGetOutputPortSignal
            (chartInstance->S, 1);
          c11_cell_temperatures_in = (uint16_T (*)[12])ssGetInputPortSignal
            (chartInstance->S, 1);
          c11_msg = (uint32_T (*)[2])ssGetInputPortSignal(chartInstance->S, 0);
          _SFD_SET_DATA_VALUE_PTR(0U, *c11_msg);
          _SFD_SET_DATA_VALUE_PTR(1U, *c11_cell_temperatures_in);
          _SFD_SET_DATA_VALUE_PTR(2U, *c11_cell_temperatures_out);
        }
//.........这里部分代码省略.........

开发者ID:M118-project，项目名称:M118_project，代码行数:101，代码来源:c11_Batman_Code.c

示例3: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc25_CusakisME4901arcs2InstanceStruct *chartInstance;
    chartInstance = (SFc25_CusakisME4901arcs2InstanceStruct *) ((ChartInfoStruct
      *)(ssGetUserData(S)))->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (sfGlobalDebugInstanceStruct,
           _CusakisME4901arcs2MachineNumber_,
           25,
           1,
           1,
           5,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           ssGetPath(S),
           (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation(_CusakisME4901arcs2MachineNumber_,
            chartInstance->chartNumber);
          sf_debug_set_chart_disable_implicit_casting
            (sfGlobalDebugInstanceStruct,_CusakisME4901arcs2MachineNumber_,
             chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(sfGlobalDebugInstanceStruct,
            _CusakisME4901arcs2MachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,1,1,0,"u");
          _SFD_SET_DATA_PROPS(1,10,0,0,"mt");
          _SFD_SET_DATA_PROPS(2,2,0,1,"a");
          _SFD_SET_DATA_PROPS(3,10,0,0,"mb");
          _SFD_SET_DATA_PROPS(4,10,0,0,"m");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,0,0,0,0,0,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,162);
        _SFD_TRANS_COV_WTS(0,0,0,1,0);
        if (chartAlreadyPresent==0) {
          _SFD_TRANS_COV_MAPS(0,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              1,NULL,NULL,
                              0,NULL,NULL);
        }

        {
          unsigned int dimVector[1];
          dimVector[0]= 3;
          _SFD_SET_DATA_COMPILED_PROPS(0,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c25_c_sf_marshallOut,(MexInFcnForType)NULL);
        }

        _SFD_SET_DATA_COMPILED_PROPS(1,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c25_b_sf_marshallOut,(MexInFcnForType)
          c25_b_sf_marshallIn);

        {
          unsigned int dimVector[1];
          dimVector[0]= 6;
          _SFD_SET_DATA_COMPILED_PROPS(2,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c25_sf_marshallOut,(MexInFcnForType)
            c25_sf_marshallIn);
        }

        _SFD_SET_DATA_COMPILED_PROPS(3,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c25_b_sf_marshallOut,(MexInFcnForType)
          c25_b_sf_marshallIn);
        _SFD_SET_DATA_COMPILED_PROPS(4,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c25_b_sf_marshallOut,(MexInFcnForType)
          c25_b_sf_marshallIn);

        {
          real_T (*c25_u)[3];
          real_T (*c25_a)[6];
          c25_a = (real_T (*)[6])ssGetOutputPortSignal(chartInstance->S, 1);
//.........这里部分代码省略.........

开发者ID:alexgrompone，项目名称:Cusakis，代码行数:101，代码来源:c25_CusakisME4901arcs2.c

示例4: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc2_Demo_AU_VA1InstanceStruct *chartInstance;
    ChartRunTimeInfo * crtInfo = (ChartRunTimeInfo *)(ssGetUserData(S));
    ChartInfoStruct * chartInfo = (ChartInfoStruct *)(crtInfo->instanceInfo);
    chartInstance = (SFc2_Demo_AU_VA1InstanceStruct *) chartInfo->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (sfGlobalDebugInstanceStruct,
           _Demo_AU_VA1MachineNumber_,
           2,
           1,
           1,
           0,
           3,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           (void *)S);

        /* Each instance must initialize ist own list of scripts */
        init_script_number_translation(_Demo_AU_VA1MachineNumber_,
          chartInstance->chartNumber,chartInstance->instanceNumber);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          sf_debug_set_chart_disable_implicit_casting
            (sfGlobalDebugInstanceStruct,_Demo_AU_VA1MachineNumber_,
             chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(sfGlobalDebugInstanceStruct,
            _Demo_AU_VA1MachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,1,1,0,"randv");
          _SFD_SET_DATA_PROPS(1,2,0,1,"v_trigW");
          _SFD_SET_DATA_PROPS(2,2,0,1,"v_trig");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,4,0,0,0,0,0,4,2);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,414);
        _SFD_CV_INIT_EML_IF(0,1,0,102,137,-1,178);
        _SFD_CV_INIT_EML_IF(0,1,1,183,219,-1,260);
        _SFD_CV_INIT_EML_IF(0,1,2,266,279,302,413);
        _SFD_CV_INIT_EML_IF(0,1,3,302,319,373,413);

        {
          static int condStart[] = { 105, 122 };

          static int condEnd[] = { 118, 136 };

          static int pfixExpr[] = { 0, 1, -3 };

          _SFD_CV_INIT_EML_MCDC(0,1,0,104,137,2,0,&(condStart[0]),&(condEnd[0]),
                                3,&(pfixExpr[0]));
        }

        {
          static int condStart[] = { 186, 204 };

          static int condEnd[] = { 200, 218 };

          static int pfixExpr[] = { 0, 1, -3 };

          _SFD_CV_INIT_EML_MCDC(0,1,1,185,219,2,2,&(condStart[0]),&(condEnd[0]),
                                3,&(pfixExpr[0]));
        }

        _SFD_SET_DATA_COMPILED_PROPS(0,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c2_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(1,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c2_sf_marshallOut,(MexInFcnForType)c2_sf_marshallIn);
        _SFD_SET_DATA_COMPILED_PROPS(2,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c2_sf_marshallOut,(MexInFcnForType)c2_sf_marshallIn);

        {
          real_T *c2_randv;
          real_T *c2_v_trigW;
          real_T *c2_v_trig;
//.........这里部分代码省略.........

开发者ID:maryamsab，项目名称:realact，代码行数:101，代码来源:c2_Demo_AU_VA1.c

示例5: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc6_CSE1_DPInstanceStruct *chartInstance;
    ChartRunTimeInfo * crtInfo = (ChartRunTimeInfo *)(ssGetUserData(S));
    ChartInfoStruct * chartInfo = (ChartInfoStruct *)(crtInfo->instanceInfo);
    chartInstance = (SFc6_CSE1_DPInstanceStruct *) chartInfo->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (sfGlobalDebugInstanceStruct,
           _CSE1_DPMachineNumber_,
           6,
           1,
           1,
           0,
           3,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           (void *)S);

        /* Each instance must initialize ist own list of scripts */
        init_script_number_translation(_CSE1_DPMachineNumber_,
          chartInstance->chartNumber,chartInstance->instanceNumber);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          sf_debug_set_chart_disable_implicit_casting
            (sfGlobalDebugInstanceStruct,_CSE1_DPMachineNumber_,
             chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(sfGlobalDebugInstanceStruct,
            _CSE1_DPMachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,1,1,0,"u_BT");
          _SFD_SET_DATA_PROPS(1,2,0,1,"F_y");
          _SFD_SET_DATA_PROPS(2,1,1,0,"nu");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,2,0,0,0,0,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,535);
        _SFD_CV_INIT_EML_IF(0,1,0,76,92,217,382);
        _SFD_CV_INIT_EML_IF(0,1,1,217,237,362,382);
        _SFD_SET_DATA_COMPILED_PROPS(0,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c6_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(1,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c6_sf_marshallOut,(MexInFcnForType)c6_sf_marshallIn);

        {
          unsigned int dimVector[1];
          dimVector[0]= 3;
          _SFD_SET_DATA_COMPILED_PROPS(2,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c6_b_sf_marshallOut,(MexInFcnForType)NULL);
        }

        {
          real_T *c6_u_BT;
          real_T *c6_F_y;
          real_T (*c6_nu)[3];
          c6_nu = (real_T (*)[3])ssGetInputPortSignal(chartInstance->S, 1);
          c6_F_y = (real_T *)ssGetOutputPortSignal(chartInstance->S, 1);
          c6_u_BT = (real_T *)ssGetInputPortSignal(chartInstance->S, 0);
          _SFD_SET_DATA_VALUE_PTR(0U, c6_u_BT);
          _SFD_SET_DATA_VALUE_PTR(1U, c6_F_y);
          _SFD_SET_DATA_VALUE_PTR(2U, *c6_nu);
        }
      }
    } else {
      sf_debug_reset_current_state_configuration(sfGlobalDebugInstanceStruct,
        _CSE1_DPMachineNumber_,chartInstance->chartNumber,
        chartInstance->instanceNumber);
    }
  }
}

开发者ID:NTNU-MCS，项目名称:CS_EnterpriseI_archive，代码行数:95，代码来源:c6_CSE1_DP.c

示例6: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc3_car_modelInstanceStruct *chartInstance;
    chartInstance = (SFc3_car_modelInstanceStruct *) ((ChartInfoStruct *)
      (ssGetUserData(S)))->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart(_car_modelMachineNumber_,
          3,
          1,
          1,
          3,
          0,
          0,
          0,
          0,
          0,
          &(chartInstance->chartNumber),
          &(chartInstance->instanceNumber),
          ssGetPath(S),
          (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation(_car_modelMachineNumber_,
            chartInstance->chartNumber);
          sf_debug_set_chart_disable_implicit_casting(_car_modelMachineNumber_,
            chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(_car_modelMachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);

          {
            unsigned int dimVector[1];
            dimVector[0]= 4;
            _SFD_SET_DATA_PROPS(0,1,1,0,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
                                1.0,0,"X",0,(MexFcnForType)c3_c_sf_marshall);
          }

          {
            unsigned int dimVector[1];
            dimVector[0]= 2;
            _SFD_SET_DATA_PROPS(1,2,0,1,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
                                1.0,0,"s",0,(MexFcnForType)c3_sf_marshall);
          }

          {
            unsigned int dimVector[1];
            dimVector[0]= 3;
            _SFD_SET_DATA_PROPS(2,1,1,0,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
                                1.0,0,"u",0,(MexFcnForType)c3_b_sf_marshall);
          }

          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of EML Model Coverage */
        _SFD_CV_INIT_EML(0,1,3,0,0,0,0,6,3);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,665);
        _SFD_CV_INIT_EML_IF(0,0,197,219,234,266);
        _SFD_CV_INIT_EML_IF(0,1,397,434,449,489);
        _SFD_CV_INIT_EML_IF(0,2,554,591,606,646);

        {
          static int condStart[] = { 201, 212 };

          static int condEnd[] = { 208, 218 };

          static int pfixExpr[] = { 0, 1, -3 };

          _SFD_CV_INIT_EML_MCDC(0,0,201,218,2,0,&(condStart[0]),&(condEnd[0]),3,
                                &(pfixExpr[0]));
        }

        {
          static int condStart[] = { 401, 418 };

          static int condEnd[] = { 414, 433 };

          static int pfixExpr[] = { 0, 1, -3 };

          _SFD_CV_INIT_EML_MCDC(0,1,401,433,2,2,&(condStart[0]),&(condEnd[0]),3,
                                &(pfixExpr[0]));
        }

//.........这里部分代码省略.........

开发者ID:geniuskpj，项目名称:term-project-ae6511，代码行数:101，代码来源:c3_car_model.c

示例7: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc6_Demo_KinectInstanceStruct *chartInstance;
    ChartRunTimeInfo * crtInfo = (ChartRunTimeInfo *)(ssGetUserData(S));
    ChartInfoStruct * chartInfo = (ChartInfoStruct *)(crtInfo->instanceInfo);
    chartInstance = (SFc6_Demo_KinectInstanceStruct *) chartInfo->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (sfGlobalDebugInstanceStruct,
           _Demo_KinectMachineNumber_,
           6,
           1,
           1,
           0,
           2,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           (void *)S);

        /* Each instance must initialize ist own list of scripts */
        init_script_number_translation(_Demo_KinectMachineNumber_,
          chartInstance->chartNumber,chartInstance->instanceNumber);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          sf_debug_set_chart_disable_implicit_casting
            (sfGlobalDebugInstanceStruct,_Demo_KinectMachineNumber_,
             chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(sfGlobalDebugInstanceStruct,
            _Demo_KinectMachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,1,1,0,"z");
          _SFD_SET_DATA_PROPS(1,2,0,1,"y");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,5,4,0,0,0,0,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"tt_blk_kernel",0,-1,722);
        _SFD_CV_INIT_EML_FCN(0,1,"aFcnTruthTableAction_1",722,-1,776);
        _SFD_CV_INIT_EML_FCN(0,2,"aFcnTruthTableAction_2",776,-1,832);
        _SFD_CV_INIT_EML_FCN(0,3,"aFcnTruthTableAction_3",832,-1,890);
        _SFD_CV_INIT_EML_FCN(0,4,"aFcnTruthTableAction_4",890,-1,944);
        _SFD_CV_INIT_EML_IF(0,1,0,416,446,477,720);
        _SFD_CV_INIT_EML_IF(0,1,1,477,511,542,720);
        _SFD_CV_INIT_EML_IF(0,1,2,542,576,607,720);
        _SFD_CV_INIT_EML_IF(0,1,3,607,641,672,720);
        _SFD_SET_DATA_COMPILED_PROPS(0,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c6_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(1,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c6_sf_marshallOut,(MexInFcnForType)c6_sf_marshallIn);

        {
          real_T *c6_z;
          real_T *c6_y;
          c6_y = (real_T *)ssGetOutputPortSignal(chartInstance->S, 1);
          c6_z = (real_T *)ssGetInputPortSignal(chartInstance->S, 0);
          _SFD_SET_DATA_VALUE_PTR(0U, c6_z);
          _SFD_SET_DATA_VALUE_PTR(1U, c6_y);
        }
      }
    } else {
      sf_debug_reset_current_state_configuration(sfGlobalDebugInstanceStruct,
        _Demo_KinectMachineNumber_,chartInstance->chartNumber,
        chartInstance->instanceNumber);
    }
  }
}

开发者ID:maryamsab，项目名称:realact，代码行数:90，代码来源:c6_Demo_Kinect.c

示例8: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc3_canudas_goal3InstanceStruct *chartInstance;
    chartInstance = (SFc3_canudas_goal3InstanceStruct *) ((ChartInfoStruct *)
      (ssGetUserData(S)))->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (_canudas_goal3MachineNumber_,
           3,
           1,
           1,
           8,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           ssGetPath(S),
           (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation(_canudas_goal3MachineNumber_,
            chartInstance->chartNumber);
          sf_debug_set_chart_disable_implicit_casting
            (_canudas_goal3MachineNumber_,chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(_canudas_goal3MachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,2,0,1,"w");
          _SFD_SET_DATA_PROPS(1,1,1,0,"z");
          _SFD_SET_DATA_PROPS(2,1,1,0,"thetad");
          _SFD_SET_DATA_PROPS(3,1,1,0,"r");
          _SFD_SET_DATA_PROPS(4,2,0,1,"v");
          _SFD_SET_DATA_PROPS(5,1,1,0,"qe");
          _SFD_SET_DATA_PROPS(6,1,1,0,"k1");
          _SFD_SET_DATA_PROPS(7,1,1,0,"k2");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,0,0,0,0,0,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,326);
        _SFD_TRANS_COV_WTS(0,0,0,1,0);
        if (chartAlreadyPresent==0) {
          _SFD_TRANS_COV_MAPS(0,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              1,NULL,NULL,
                              0,NULL,NULL);
        }

        _SFD_SET_DATA_COMPILED_PROPS(0,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c3_sf_marshallOut,(MexInFcnForType)c3_sf_marshallIn);

        {
          unsigned int dimVector[1];
          dimVector[0]= 2;
          _SFD_SET_DATA_COMPILED_PROPS(1,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c3_c_sf_marshallOut,(MexInFcnForType)NULL);
        }

        _SFD_SET_DATA_COMPILED_PROPS(2,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c3_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(3,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c3_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(4,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c3_sf_marshallOut,(MexInFcnForType)c3_sf_marshallIn);

        {
          unsigned int dimVector[1];
          dimVector[0]= 3;
          _SFD_SET_DATA_COMPILED_PROPS(5,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c3_b_sf_marshallOut,(MexInFcnForType)NULL);
        }

        _SFD_SET_DATA_COMPILED_PROPS(6,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c3_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(7,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c3_sf_marshallOut,(MexInFcnForType)NULL);

        {
//.........这里部分代码省略.........

开发者ID:OneTwoSteph，项目名称:Work，代码行数:101，代码来源:c3_canudas_goal3.c

示例9: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc1_VrSubsystemInstanceStruct *chartInstance =
      (SFc1_VrSubsystemInstanceStruct *)sf_get_chart_instance_ptr(S);
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (sfGlobalDebugInstanceStruct,
           _VrSubsystemMachineNumber_,
           1,
           1,
           1,
           0,
           2,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           (void *)S);

        /* Each instance must initialize its own list of scripts */
        init_script_number_translation(_VrSubsystemMachineNumber_,
          chartInstance->chartNumber,chartInstance->instanceNumber);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          sf_debug_set_chart_disable_implicit_casting
            (sfGlobalDebugInstanceStruct,_VrSubsystemMachineNumber_,
             chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(sfGlobalDebugInstanceStruct,
            _VrSubsystemMachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,1,1,0,"u");
          _SFD_SET_DATA_PROPS(1,2,0,1,"y");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,0,0,0,0,0,3,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,1259);
        _SFD_CV_INIT_EML_FOR(0,1,0,696,718,873);
        _SFD_CV_INIT_EML_FOR(0,1,1,875,915,1072);
        _SFD_CV_INIT_EML_FOR(0,1,2,1074,1104,1259);

        {
          unsigned int dimVector[1];
          dimVector[0]= 320U;
          _SFD_SET_DATA_COMPILED_PROPS(0,SF_DOUBLE,1,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c1_b_sf_marshallOut,(MexInFcnForType)NULL);
        }

        {
          unsigned int dimVector[2];
          dimVector[0]= 1U;
          dimVector[1]= 128U;
          _SFD_SET_DATA_COMPILED_PROPS(1,SF_DOUBLE,2,&(dimVector[0]),0,0,0,0.0,
            1.0,0,0,(MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)
            c1_sf_marshallIn);
        }
      }
    } else {
      sf_debug_reset_current_state_configuration(sfGlobalDebugInstanceStruct,
        _VrSubsystemMachineNumber_,chartInstance->chartNumber,
        chartInstance->instanceNumber);
    }
  }
}

开发者ID:davidecavezza，项目名称:simulation-hipeds，代码行数:86，代码来源:c1_VrSubsystem.c

示例10: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc1_a3InstanceStruct *chartInstance;
    chartInstance = (SFc1_a3InstanceStruct *) ((ChartInfoStruct *)(ssGetUserData
      (S)))->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (sfGlobalDebugInstanceStruct,
           _a3MachineNumber_,
           1,
           1,
           1,
           8,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           ssGetPath(S),
           (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation(_a3MachineNumber_,
            chartInstance->chartNumber);
          sf_debug_set_chart_disable_implicit_casting
            (sfGlobalDebugInstanceStruct,_a3MachineNumber_,
             chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(sfGlobalDebugInstanceStruct,
            _a3MachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,1,1,0,"c");
          _SFD_SET_DATA_PROPS(1,1,1,0,"d");
          _SFD_SET_DATA_PROPS(2,1,1,0,"xp1");
          _SFD_SET_DATA_PROPS(3,1,1,0,"xp2");
          _SFD_SET_DATA_PROPS(4,1,1,0,"m");
          _SFD_SET_DATA_PROPS(5,1,1,0,"u");
          _SFD_SET_DATA_PROPS(6,2,0,1,"xpp");
          _SFD_SET_DATA_PROPS(7,1,1,0,"x");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,0,0,0,0,0,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,95);
        _SFD_SET_DATA_COMPILED_PROPS(0,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(1,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(2,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(3,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(4,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(5,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)NULL);
        _SFD_SET_DATA_COMPILED_PROPS(6,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)c1_sf_marshallIn);
        _SFD_SET_DATA_COMPILED_PROPS(7,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,0,
          (MexFcnForType)c1_sf_marshallOut,(MexInFcnForType)NULL);

        {
          real_T *c1_c;
          real_T *c1_d;
          real_T *c1_xp1;
          real_T *c1_xp2;
          real_T *c1_m;
          real_T *c1_u;
          real_T *c1_xpp;
          real_T *c1_x;
          c1_x = (real_T *)ssGetInputPortSignal(chartInstance->S, 6);
          c1_xpp = (real_T *)ssGetOutputPortSignal(chartInstance->S, 1);
          c1_u = (real_T *)ssGetInputPortSignal(chartInstance->S, 5);
          c1_m = (real_T *)ssGetInputPortSignal(chartInstance->S, 4);
          c1_xp2 = (real_T *)ssGetInputPortSignal(chartInstance->S, 3);
          c1_xp1 = (real_T *)ssGetInputPortSignal(chartInstance->S, 2);
          c1_d = (real_T *)ssGetInputPortSignal(chartInstance->S, 1);
          c1_c = (real_T *)ssGetInputPortSignal(chartInstance->S, 0);
          _SFD_SET_DATA_VALUE_PTR(0U, c1_c);
          _SFD_SET_DATA_VALUE_PTR(1U, c1_d);
//.........这里部分代码省略.........

开发者ID:d-f，项目名称:MTP，代码行数:101，代码来源:c1_a3.c

示例11: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (_adcs_v15_integral_Power_no_charge_in_detumbMachineNumber_,
           6,
           1,
           1,
           3,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance.chartNumber),
           &(chartInstance.instanceNumber),
           ssGetPath(S),
           (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation
            (_adcs_v15_integral_Power_no_charge_in_detumbMachineNumber_,
             chartInstance.chartNumber);
          sf_debug_set_chart_disable_implicit_casting
            (_adcs_v15_integral_Power_no_charge_in_detumbMachineNumber_,
             chartInstance.chartNumber,1);
          sf_debug_set_chart_event_thresholds
            (_adcs_v15_integral_Power_no_charge_in_detumbMachineNumber_,
             chartInstance.chartNumber,
             0,
             0,
             0);
          _SFD_SET_DATA_PROPS(0,1,1,0,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,"a",0,
                              (MexFcnForType)c6_sf_marshall);
          _SFD_SET_DATA_PROPS(1,2,0,1,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,"y",0,
                              (MexFcnForType)c6_sf_marshall);
          _SFD_SET_DATA_PROPS(2,1,1,0,SF_DOUBLE,0,NULL,0,0,0,0.0,1.0,0,"b",0,
                              (MexFcnForType)c6_sf_marshall);
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of EML Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,0,0,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,67);
        _SFD_CV_INIT_EML_IF(0,0,48,54,-1,67);
        _SFD_TRANS_COV_WTS(0,0,0,1,0);
        if (chartAlreadyPresent==0) {
          _SFD_TRANS_COV_MAPS(0,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              1,NULL,NULL,
                              0,NULL,NULL);
        }

        {
          real_T *c6_a;
          real_T *c6_y;
          real_T *c6_b;
          c6_y = (real_T *)ssGetOutputPortSignal(chartInstance.S, 1);
          c6_a = (real_T *)ssGetInputPortSignal(chartInstance.S, 0);
          c6_b = (real_T *)ssGetInputPortSignal(chartInstance.S, 1);
          _SFD_SET_DATA_VALUE_PTR(0U, c6_a);
          _SFD_SET_DATA_VALUE_PTR(1U, c6_y);
          _SFD_SET_DATA_VALUE_PTR(2U, c6_b);
        }
      }
    } else {
      sf_debug_reset_current_state_configuration
        (_adcs_v15_integral_Power_no_charge_in_detumbMachineNumber_,
         chartInstance.chartNumber,chartInstance.instanceNumber);
    }
  }
}

开发者ID:avnishks，项目名称:pratham，代码行数:88，代码来源:c6_adcs_v15_integral_Power_no_charge_in_detumb.c

示例12: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc61_heart_modelInstanceStruct *chartInstance;
    chartInstance = (SFc61_heart_modelInstanceStruct *) ((ChartInfoStruct *)
      (ssGetUserData(S)))->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (_heart_modelMachineNumber_,
           61,
           1,
           4,
           1,
           3,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           ssGetPath(S),
           (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation(_heart_modelMachineNumber_,
            chartInstance->chartNumber);
          sf_debug_set_chart_disable_implicit_casting(_heart_modelMachineNumber_,
            chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(_heart_modelMachineNumber_,
            chartInstance->chartNumber,
            3,
            3,
            3);
          _SFD_SET_DATA_PROPS(0,1,1,0,"v");
          _SFD_EVENT_SCOPE(0,2);
          _SFD_EVENT_SCOPE(1,2);
          _SFD_EVENT_SCOPE(2,2);
          _SFD_STATE_INFO(0,0,0);
          _SFD_CH_SUBSTATE_COUNT(1);
          _SFD_CH_SUBSTATE_DECOMP(0);
          _SFD_CH_SUBSTATE_INDEX(0,0);
          _SFD_ST_SUBSTATE_COUNT(0,0);
        }

        _SFD_CV_INIT_CHART(1,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        {
          static unsigned int sStartGuardMap[] = { 1 };

          static unsigned int sEndGuardMap[] = { 7 };

          static int sPostFixPredicateTree[] = { 0 };

          _SFD_CV_INIT_TRANS(3,1,&(sStartGuardMap[0]),&(sEndGuardMap[0]),1,
                             &(sPostFixPredicateTree[0]));
        }

        {
          static unsigned int sStartGuardMap[] = { 1 };

          static unsigned int sEndGuardMap[] = { 5 };

          static int sPostFixPredicateTree[] = { 0 };

          _SFD_CV_INIT_TRANS(1,1,&(sStartGuardMap[0]),&(sEndGuardMap[0]),1,
                             &(sPostFixPredicateTree[0]));
        }

        {
          static unsigned int sStartGuardMap[] = { 1, 8 };

          static unsigned int sEndGuardMap[] = { 6, 13 };

          static int sPostFixPredicateTree[] = { 0, 1, -3 };

          _SFD_CV_INIT_TRANS(2,2,&(sStartGuardMap[0]),&(sEndGuardMap[0]),3,
                             &(sPostFixPredicateTree[0]));
        }

        _SFD_TRANS_COV_WTS(0,0,0,0,0);
        if (chartAlreadyPresent==0) {
          _SFD_TRANS_COV_MAPS(0,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              0,NULL,NULL);
        }

        _SFD_TRANS_COV_WTS(3,0,1,0,1);
        if (chartAlreadyPresent==0) {
//.........这里部分代码省略.........

开发者ID:mingcongzhang，项目名称:Software-Projects-Work，代码行数:101，代码来源:c61_heart_model.c

示例13: chart_debug_initialization

static void chart_debug_initialization(SimStruct *S, unsigned int
  fullDebuggerInitialization)
{
  if (!sim_mode_is_rtw_gen(S)) {
    SFc9_CusakisME4901arcs2InstanceStruct *chartInstance;
    chartInstance = (SFc9_CusakisME4901arcs2InstanceStruct *) ((ChartInfoStruct *)
      (ssGetUserData(S)))->chartInstance;
    if (ssIsFirstInitCond(S) && fullDebuggerInitialization==1) {
      /* do this only if simulation is starting */
      {
        unsigned int chartAlreadyPresent;
        chartAlreadyPresent = sf_debug_initialize_chart
          (sfGlobalDebugInstanceStruct,
           _CusakisME4901arcs2MachineNumber_,
           9,
           1,
           1,
           5,
           0,
           0,
           0,
           0,
           0,
           &(chartInstance->chartNumber),
           &(chartInstance->instanceNumber),
           ssGetPath(S),
           (void *)S);
        if (chartAlreadyPresent==0) {
          /* this is the first instance */
          init_script_number_translation(_CusakisME4901arcs2MachineNumber_,
            chartInstance->chartNumber);
          sf_debug_set_chart_disable_implicit_casting
            (sfGlobalDebugInstanceStruct,_CusakisME4901arcs2MachineNumber_,
             chartInstance->chartNumber,1);
          sf_debug_set_chart_event_thresholds(sfGlobalDebugInstanceStruct,
            _CusakisME4901arcs2MachineNumber_,
            chartInstance->chartNumber,
            0,
            0,
            0);
          _SFD_SET_DATA_PROPS(0,2,0,1,"u");
          _SFD_SET_DATA_PROPS(1,2,0,1,"but");
          _SFD_SET_DATA_PROPS(2,1,1,0,"Axes");
          _SFD_SET_DATA_PROPS(3,1,1,0,"Buttons");
          _SFD_SET_DATA_PROPS(4,2,0,1,"j");
          _SFD_STATE_INFO(0,0,2);
          _SFD_CH_SUBSTATE_COUNT(0);
          _SFD_CH_SUBSTATE_DECOMP(0);
        }

        _SFD_CV_INIT_CHART(0,0,0,0);

        {
          _SFD_CV_INIT_STATE(0,0,0,0,0,0,NULL,NULL);
        }

        _SFD_CV_INIT_TRANS(0,0,NULL,NULL,0,NULL);

        /* Initialization of MATLAB Function Model Coverage */
        _SFD_CV_INIT_EML(0,1,1,10,0,0,0,0,0,0,0);
        _SFD_CV_INIT_EML_FCN(0,0,"eML_blk_kernel",0,-1,732);
        _SFD_CV_INIT_EML_IF(0,1,0,176,190,212,391);
        _SFD_CV_INIT_EML_IF(0,1,1,212,229,261,391);
        _SFD_CV_INIT_EML_IF(0,1,2,261,280,304,391);
        _SFD_CV_INIT_EML_IF(0,1,3,304,322,349,391);
        _SFD_CV_INIT_EML_IF(0,1,4,393,409,415,468);
        _SFD_CV_INIT_EML_IF(0,1,5,420,436,447,464);
        _SFD_CV_INIT_EML_IF(0,1,6,470,486,519,728);
        _SFD_CV_INIT_EML_IF(0,1,7,519,539,572,728);
        _SFD_CV_INIT_EML_IF(0,1,8,572,592,625,728);
        _SFD_CV_INIT_EML_IF(0,1,9,625,645,678,728);
        _SFD_TRANS_COV_WTS(0,0,0,1,0);
        if (chartAlreadyPresent==0) {
          _SFD_TRANS_COV_MAPS(0,
                              0,NULL,NULL,
                              0,NULL,NULL,
                              1,NULL,NULL,
                              0,NULL,N

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sf_debug_set_machine_data_thresholds函数代码示例发布时间：2022-05-30

C++ sf_debug_set_chart_disable_implicit_casting函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19143|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ sf_debug_set_chart_event_thresholds函数代码示例

示例1: chart_debug_initialization

示例2: chart_debug_initialization

示例3: chart_debug_initialization

示例4: chart_debug_initialization

示例5: chart_debug_initialization

示例6: chart_debug_initialization

示例7: chart_debug_initialization

示例8: chart_debug_initialization

示例9: chart_debug_initialization

示例10: chart_debug_initialization

示例11: chart_debug_initialization

示例12: chart_debug_initialization

示例13: chart_debug_initialization

请发表评论

全部评论

上一篇：

下一篇：

kostub/iosMath: Beautiful math equation

pallet/zi: Maven plugin for clojure

CVE-2022-38625

jonathantribouharet/JTMaterialTransition

CVE-2020-28422

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053