C++ setprg8r函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中setprg8r函数的典型用法代码示例。如果您正苦于以下问题：C++ setprg8r函数的具体用法？C++ setprg8r怎么用？C++ setprg8r使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了setprg8r函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: SA9602BPW

static void SA9602BPW(uint32 A, uint8 V)
{
  setprg8r(EXPREGS[1],A,V&0x3F);
  if(MMC3_cmd&0x40)
    setprg8r(0,0x8000,~(1));
  else
    setprg8r(0,0xc000,~(1));
  setprg8r(0,0xe000,~(0));
}

开发者ID:glennimoss，项目名称:marionet，代码行数:9，代码来源:sa-9602b.cpp

示例2: Sync

static void Sync(void)
{
  setprg2r(0,0xE000,0);
  setprg2r(0,0xE800,0);
  setprg2r(0,0xF000,0);
  setprg2r(0,0xF800,0);

  setprg8r(1,0x6000,3);
  setprg8r(1,0x8000,0);
  setprg8r(1,0xA000,1);
  setprg8r(1,0xC000,2);

  setchr8(chr & 1);
  setmirror(MI_V);
}

开发者ID:glennimoss，项目名称:marionet，代码行数:15，代码来源:le05.cpp

示例3: FDSInit

static void FDSInit(void)
{
	memset(FDSRegs,0,sizeof(FDSRegs));
	writeskip=DiskPtr=DiskSeekIRQ=0;
	setmirror(1);

	setprg8r(0,0xe000,0);    // BIOS
	setprg32r(1,0x6000,0);   // 32KB RAM
	setchr8(0);     // 8KB CHR RAM

	MapIRQHook=FDSFix;
	GameStateRestore=FDSStateRestore;

	SetReadHandler(0x4030,0x4030,FDSRead4030);
	SetReadHandler(0x4031,0x4031,FDSRead4031);
	SetReadHandler(0x4032,0x4032,FDSRead4032);
	SetReadHandler(0x4033,0x4033,FDSRead4033);

	SetWriteHandler(0x4020,0x4025,FDSWrite); 

	SetWriteHandler(0x6000,0xdfff,FDSRAMWrite);
	SetReadHandler(0x6000,0xdfff,FDSRAMRead);
	SetReadHandler(0xE000,0xFFFF,FDSBIOSRead);
	IRQCount=IRQLatch=IRQa=0;

	FDSSoundReset();
	InDisk=0;
	SelectDisk=0;
}

开发者ID:Cancerous，项目名称:fceux-xenon，代码行数:29，代码来源:fds.cpp

示例4: Sync

static void Sync(void)
{
  setchr8(0);
  setprg8r(0x10,0x6000,0);
  setprg32(0x8000,reg&0x1f);
  setmirror(((reg&0x20)>>5)^1);
}

开发者ID:CatalystG，项目名称:fceu-next，代码行数:7，代码来源:177.cpp

示例5: GenMMC3Power

void GenMMC3Power(void) {
	if (UNIFchrrama) setchr8(0);

	SetWriteHandler(0x8000, 0xBFFF, MMC3_CMDWrite);
	SetWriteHandler(0xC000, 0xFFFF, MMC3_IRQWrite);
	SetReadHandler(0x8000, 0xFFFF, CartBR);
	A001B = A000B = 0;
	setmirror(1);
	if (mmc3opts & 1) {
		if (WRAMSIZE == 1024) {
			FCEU_CheatAddRAM(1, 0x7000, WRAM);
			SetReadHandler(0x7000, 0x7FFF, MAWRAMMMC6);
			SetWriteHandler(0x7000, 0x7FFF, MBWRAMMMC6);
		} else {
			FCEU_CheatAddRAM(WRAMSIZE >> 10, 0x6000, WRAM);
			SetWriteHandler(0x6000, 0x6000 + ((WRAMSIZE - 1) & 0x1fff), CartBW);
			SetReadHandler(0x6000, 0x6000 + ((WRAMSIZE - 1) & 0x1fff), CartBR);
			setprg8r(0x10, 0x6000, 0);
		}
		if (!(mmc3opts & 2))
			FCEU_dwmemset(WRAM, 0, WRAMSIZE);
	}
	MMC3RegReset();
	if (CHRRAM)
		FCEU_dwmemset(CHRRAM, 0, CHRRAMSIZE);
}

开发者ID:Plombo，项目名称:fceux，代码行数:26，代码来源:mmc3.cpp

示例6: GenMMC3Power

void GenMMC3Power(void) {
	if (UNIFchrrama) setchr8(0);

	SetWriteHandler(0x8000, 0xBFFF, MMC3_CMDWrite);
	SetWriteHandler(0xC000, 0xFFFF, MMC3_IRQWrite);
	SetReadHandler(0x8000, 0xFFFF, CartBR);

// KT-008 boards hack 2-in-1, TODO assign to new ines mapper, most dump of KT-boards on the net are mapper 4, so need database or goodnes fix support
	SetWriteHandler(0x5000,0x5FFF, KT008HackWrite);

	A001B = A000B = 0;
	setmirror(1);
	if (mmc3opts & 1) {
		if (WRAMSIZE == 1024) {
			FCEU_CheatAddRAM(1, 0x7000, WRAM);
			SetReadHandler(0x7000, 0x7FFF, MAWRAMMMC6);
			SetWriteHandler(0x7000, 0x7FFF, MBWRAMMMC6);
		} else {
			FCEU_CheatAddRAM(WRAMSIZE >> 10, 0x6000, WRAM);
			SetWriteHandler(0x6000, 0x6000 + ((WRAMSIZE - 1) & 0x1fff), CartBW);
			SetReadHandler(0x6000, 0x6000 + ((WRAMSIZE - 1) & 0x1fff), CartBR);
			setprg8r(0x10, 0x6000, 0);
		}
		if (!(mmc3opts & 2))
			FCEU_dwmemset(WRAM, 0, WRAMSIZE);
	}
	MMC3RegReset();
	if (CHRRAM)
		FCEU_dwmemset(CHRRAM, 0, CHRRAMSIZE);
}

开发者ID:Nolaan，项目名称:fceux，代码行数:30，代码来源:mmc3.cpp

示例7: Sync

static void Sync(void)
{
  uint8 i;
  setprg8r(0x10,0x6000,0);
  setprg8(0x8000,prg[0]);
  setprg8(0xa000,prg[1]);
  setprg8(0xc000,~1);
  setprg8(0xe000,~0);
  for(i=0; i<8; i++)
  {
    uint32 chr = chrlo[i]|(chrhi[i]<<8);
    if(chrlo[i]==0xc8)
    {
      vlock = 0;
      continue;
    }
    else if(chrlo[i]==0x88)
    {
      vlock = 1;
      continue;
    }
    if(((chrlo[i]==4)||(chrlo[i]==5))&&!vlock)
      setchr1r(0x10,i<<10,chr&1);
    else
      setchr1(i<<10,chr);
  }
  switch(mirr)
  {
    case 0: setmirror(MI_V); break;
    case 1: setmirror(MI_H); break;
    case 2: setmirror(MI_0); break;
    case 3: setmirror(MI_1); break;
  }
}

开发者ID:MatChung，项目名称:fceux-ps3，代码行数:34，代码来源:253.cpp

示例8: Sync

static void Sync(void)
{
  setprg4r(1,0x5000,1);
  setprg8r(1,0x6000,1);
  setprg32(0x8000,prg);
  setchr8(0);
}

开发者ID:IcooN，项目名称:OpenEmu，代码行数:7，代码来源:smb2j.c

示例9: Sync

static void Sync(void)
{
  setmirror(reg[0]);
  setprg8r(0x10,0x6000,0);
  setchr8(0);
  setprg32(0x8000,(reg[1]+reg[2])&0xf);
}

开发者ID:CatalystG，项目名称:fceu-next，代码行数:7，代码来源:178.cpp

示例10: Sync

static void Sync(void)
{
  setchr8(0);
  setprg8r(0x10,0x6000,0);
  setprg32(0x8000,reg[1]>>1);
  setmirror((reg[0]&1)^1);
}

开发者ID:Cancerous，项目名称:fceux-xenon，代码行数:7，代码来源:179.cpp

示例11: MDFN_VSUniPower

void MDFN_VSUniPower(void)
{
 coinon = 0;
 VSindex = 0;

 memset(WRAM, 0xFF, 8192);
 setprg8r(0x10, 0x6000, 0);
}

开发者ID:IcooN，项目名称:OpenEmu，代码行数:8，代码来源:vsuni.cpp

示例12: Sync

static void Sync(void) {
    setprg8(0x6000, reg);
    setprg8(0x8000, ~3);
    setprg8(0xa000, ~2);
    setprg8r(0x10, 0xc000, 0);
    setprg8(0xe000, ~0);
    setchr8(0);
}

开发者ID:DanielFontes，项目名称:Provenance，代码行数:8，代码来源:lh32.cpp

示例13: M153Power

static void M153Power(void)
{
  BandaiSync();
  setprg8r(0x10,0x6000,0);
  SetReadHandler(0x6000,0x7FFF,CartBR);
  SetWriteHandler(0x6000,0x7FFF,CartBW);
  SetReadHandler(0x8000,0xFFFF,CartBR);
  SetWriteHandler(0x8000,0xFFFF,BandaiWrite);
}

开发者ID:alexbevi，项目名称:emu-ex-plus-alpha，代码行数:9，代码来源:bandai.cpp

示例14: UNLSC127Power

static void UNLSC127Power(void) {
	Sync();
	setprg8r(0x10, 0x6000, 0);
	setprg8(0xE000, ~0);
	SetReadHandler(0x6000, 0x7fff, CartBR);
	SetWriteHandler(0x6000, 0x7fff, CartBW);
	SetReadHandler(0x8000, 0xFFFF, CartBR);
	SetWriteHandler(0x8000, 0xFFFF, UNLSC127Write);
}

开发者ID:HerbFargus，项目名称:FCE3D，代码行数:9，代码来源:sc-127.cpp

示例15: Sync

static void Sync(void) {
	setprg2r(0x10, 0x0800, 0);
	setprg2r(0x10, 0x1000, 1);
	setprg2r(0x10, 0x1800, 2);
	setprg8r(0x10, 0x6000, 1);
	setprg16(0x8000, 0);
	setprg16(0xC000, ~0);
	setchr8(0);
}

开发者ID:frangarcj，项目名称:libretro-fceumm，代码行数:9，代码来源:famicombox.c

示例16: Sync

static void Sync(void) {
	setchr2(0x0000, chr_reg[0]);
	setchr2(0x0800, chr_reg[1]);
	setchr2(0x1000, chr_reg[2]);
	setchr2(0x1800, chr_reg[3]);
	setprg8r(0x10, 0x6000, 0);
	setprg16r((PRGptr[1]) ? kogame : 0, 0x8000, prg_reg);
	setprg16(0xC000, ~0);
}

开发者ID:Brunnis，项目名称:libretro-fceumm，代码行数:9，代码来源:68.cpp

示例17: MMC5WRAM

static void MMC5WRAM(uint32 A, uint32 V)
{
   //printf("%02x\n",V);
   V=MMC5WRAMIndex[V&7];
   if(V!=255)
   {
    setprg8r(0x10,A,V);
    MMC5MemIn[(A-0x6000)>>13]=1;
   }

开发者ID:IcooN，项目名称:OpenEmu，代码行数:9，代码来源:mmc5.cpp

示例18: SyncLH10

static void SyncLH10(void) {
	setprg8(0x6000, ~1);
	setprg8(0x8000, reg[6]);
	setprg8(0xA000, reg[7]);
	setprg8r(0x10, 0xC000, 0);
	setprg8(0xE000, ~0);
	setchr8(0);
	setmirror(0);
}

开发者ID:BigMacStorm，项目名称:NES_machine，代码行数:9，代码来源:ks7037.cpp

示例19: Sync

static void Sync(void)
{
  setprg8r(0x10,0x6000,0);
	setprg8(0x8000,prg[0]);
	setprg8(0xA000,prg[1]);
	setprg8(0xC000,prg[2]);
	setprg8(0xE000,prg[3]);

  setchr8(chr);
}

开发者ID:TijmenW，项目名称:tom7，代码行数:10，代码来源:176.cpp

示例20: Power

static void Power(CartInfo *info)
{
 if(!info->battery)
  memset(WRAM, 0xFF, 8192);
 PRGBank32 = 0;
 CHRBanks[0] = 0;
 CHRBanks[1] = 1;
 setprg8r(0x10, 0x6000, 0);
 Sync();
}

开发者ID:BadyRaty，项目名称:Mednafen-Core，代码行数:10，代码来源:34.cpp

注：本文中的setprg8r函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。