• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ set_feature函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中set_feature函数的典型用法代码示例。如果您正苦于以下问题：C++ set_feature函数的具体用法？C++ set_feature怎么用？C++ set_feature使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了set_feature函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: pxa250_initfn

static void pxa250_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);

    cpu->dtb_compatible = "marvell,xscale";
    set_feature(&cpu->env, ARM_FEATURE_V5);
    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
    cpu->midr = 0x69052100;
    cpu->ctr = 0xd172172;
    cpu->reset_sctlr = 0x00000078;
}
开发者ID:CSRedRat，项目名称:qemu，代码行数:11，代码来源:cpu.c


示例2: uc32_any_cpu_initfn

static void uc32_any_cpu_initfn(Object *obj)
{
    UniCore32CPU *cpu = UNICORE32_CPU(obj);
    CPUUniCore32State *env = &cpu->env;

    env->cp0.c0_cpuid = 0xffffffff;
    env->ucf64.xregs[UC32_UCF64_FPSCR] = 0;

    set_feature(env, UC32_HWCAP_CMOV);
    set_feature(env, UC32_HWCAP_UCF64);
}
开发者ID:AbnerChang，项目名称:RiscVQemuPcat，代码行数:11，代码来源:cpu.c


示例3: arm926_initfn

static void arm926_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);
    set_feature(&cpu->env, ARM_FEATURE_V5);
    set_feature(&cpu->env, ARM_FEATURE_VFP);
    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
    set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
    cpu->midr = 0x41069265;
    cpu->reset_fpsid = 0x41011090;
    cpu->ctr = 0x1dd20d2;
    cpu->reset_sctlr = 0x00090078;
}
开发者ID:huixue，项目名称:ttcp，代码行数:12，代码来源:cpu.c


示例4: arm946_initfn

static void arm946_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);

    cpu->dtb_compatible = "arm,arm946";
    set_feature(&cpu->env, ARM_FEATURE_V5);
    set_feature(&cpu->env, ARM_FEATURE_MPU);
    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
    cpu->midr = 0x41059461;
    cpu->ctr = 0x0f004006;
    cpu->reset_sctlr = 0x00000078;
}
开发者ID:DeanSinaean，项目名称:qemu，代码行数:12，代码来源:cpu.c


示例5: aarch64_a53_initfn

static void aarch64_a53_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);

    cpu->dtb_compatible = "arm,cortex-a53";
    set_feature(&cpu->env, ARM_FEATURE_V8);
    set_feature(&cpu->env, ARM_FEATURE_VFP4);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
    set_feature(&cpu->env, ARM_FEATURE_AARCH64);
    set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
    set_feature(&cpu->env, ARM_FEATURE_EL2);
    set_feature(&cpu->env, ARM_FEATURE_EL3);
    set_feature(&cpu->env, ARM_FEATURE_PMU);
    cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A53;
    cpu->midr = 0x410fd034;
    cpu->revidr = 0x00000000;
    cpu->reset_fpsid = 0x41034070;
    cpu->isar.mvfr0 = 0x10110222;
    cpu->isar.mvfr1 = 0x12111111;
    cpu->isar.mvfr2 = 0x00000043;
    cpu->ctr = 0x84448004; /* L1Ip = VIPT */
    cpu->reset_sctlr = 0x00c50838;
    cpu->id_pfr0 = 0x00000131;
    cpu->id_pfr1 = 0x00011011;
    cpu->id_dfr0 = 0x03010066;
    cpu->id_afr0 = 0x00000000;
    cpu->id_mmfr0 = 0x10101105;
    cpu->id_mmfr1 = 0x40000000;
    cpu->id_mmfr2 = 0x01260000;
    cpu->id_mmfr3 = 0x02102211;
    cpu->isar.id_isar0 = 0x02101110;
    cpu->isar.id_isar1 = 0x13112111;
    cpu->isar.id_isar2 = 0x21232042;
    cpu->isar.id_isar3 = 0x01112131;
    cpu->isar.id_isar4 = 0x00011142;
    cpu->isar.id_isar5 = 0x00011121;
    cpu->isar.id_isar6 = 0;
    cpu->isar.id_aa64pfr0 = 0x00002222;
    cpu->id_aa64dfr0 = 0x10305106;
    cpu->isar.id_aa64isar0 = 0x00011120;
    cpu->isar.id_aa64mmfr0 = 0x00001122; /* 40 bit physical addr */
    cpu->dbgdidr = 0x3516d000;
    cpu->clidr = 0x0a200023;
    cpu->ccsidr[0] = 0x700fe01a; /* 32KB L1 dcache */
    cpu->ccsidr[1] = 0x201fe00a; /* 32KB L1 icache */
    cpu->ccsidr[2] = 0x707fe07a; /* 1024KB L2 cache */
    cpu->dcz_blocksize = 4; /* 64 bytes */
    cpu->gic_num_lrs = 4;
    cpu->gic_vpribits = 5;
    cpu->gic_vprebits = 5;
    define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
}
开发者ID:gkurz，项目名称:qemu，代码行数:53，代码来源:cpu64.c


示例6: unicore_ii_cpu_initfn

static void unicore_ii_cpu_initfn(Object *obj)
{
    UniCore32CPU *cpu = UNICORE32_CPU(obj);
    CPUUniCore32State *env = &cpu->env;

    env->cp0.c0_cpuid = 0x4d000863;
    env->cp0.c0_cachetype = 0x0d152152;
    env->cp0.c1_sys = 0x2000;
    env->cp0.c2_base = 0x0;
    env->cp0.c3_faultstatus = 0x0;
    env->cp0.c4_faultaddr = 0x0;
    env->ucf64.xregs[UC32_UCF64_FPSCR] = 0;

    set_feature(env, UC32_HWCAP_CMOV);
    set_feature(env, UC32_HWCAP_UCF64);
}
开发者ID:JehandadKhan，项目名称:dpdk-ovs，代码行数:16，代码来源:cpu.c


示例7: rv64imacu_nommu_cpu_init

static void rv64imacu_nommu_cpu_init(Object *obj)
{
    CPURISCVState *env = &RISCV_CPU(obj)->env;
    set_misa(env, RV64 | RVI | RVM | RVA | RVC | RVU);
    set_versions(env, USER_VERSION_2_02_0, PRIV_VERSION_1_10_0);
    set_resetvec(env, DEFAULT_RSTVEC);
    set_feature(env, RISCV_FEATURE_PMP);
}
开发者ID:alistair23，项目名称:qemu，代码行数:8，代码来源:cpu.c


示例8: arm_any_initfn

static void arm_any_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);
    set_feature(&cpu->env, ARM_FEATURE_V8);
    set_feature(&cpu->env, ARM_FEATURE_VFP4);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
    set_feature(&cpu->env, ARM_FEATURE_V8_AES);
    set_feature(&cpu->env, ARM_FEATURE_V8_SHA1);
    set_feature(&cpu->env, ARM_FEATURE_V8_SHA256);
    set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
    set_feature(&cpu->env, ARM_FEATURE_CRC);
    cpu->midr = 0xffffffff;
}
开发者ID:Acidburn0zzz，项目名称:qemu，代码行数:14，代码来源:cpu.c


示例9: cortex_m0plus_initfn

static void cortex_m0plus_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);
    set_feature(&cpu->env, ARM_FEATURE_VAPA);
    set_feature(&cpu->env, ARM_FEATURE_THUMB2);
    set_feature(&cpu->env, ARM_FEATURE_MPIDR);
    set_feature(&cpu->env, ARM_FEATURE_V6);
    set_feature(&cpu->env, ARM_FEATURE_V5);
    set_feature(&cpu->env, ARM_FEATURE_V4T);
    set_feature(&cpu->env, ARM_FEATURE_THUMB_DIV);
    set_feature(&cpu->env, ARM_FEATURE_M0);
    set_feature(&cpu->env, ARM_FEATURE_M0PLUS);
    cpu->midr = 0x00000002;
}
开发者ID:yangchengwork，项目名称:qemu，代码行数:14，代码来源:cpu.c


示例10: arm1176_initfn

static void arm1176_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);

    cpu->dtb_compatible = "arm,arm1176";
    set_feature(&cpu->env, ARM_FEATURE_V6K);
    set_feature(&cpu->env, ARM_FEATURE_VFP);
    set_feature(&cpu->env, ARM_FEATURE_VAPA);
    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
    set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
    set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
    set_feature(&cpu->env, ARM_FEATURE_TRUSTZONE);
    cpu->midr = 0x410fb767;
    cpu->reset_fpsid = 0x410120b5;
    cpu->mvfr0 = 0x11111111;
    cpu->mvfr1 = 0x00000000;
    cpu->ctr = 0x1dd20d2;
    cpu->reset_sctlr = 0x00050078;
    cpu->id_pfr0 = 0x111;
    cpu->id_pfr1 = 0x11;
    cpu->id_dfr0 = 0x33;
    cpu->id_afr0 = 0;
    cpu->id_mmfr0 = 0x01130003;
    cpu->id_mmfr1 = 0x10030302;
    cpu->id_mmfr2 = 0x01222100;
    cpu->id_isar0 = 0x0140011;
    cpu->id_isar1 = 0x12002111;
    cpu->id_isar2 = 0x11231121;
    cpu->id_isar3 = 0x01102131;
    cpu->id_isar4 = 0x01141;
    cpu->reset_auxcr = 7;
}
开发者ID:genkilife，项目名称:qemu-linaro，代码行数:32，代码来源:cpu.c


示例11: aarch64_any_initfn

static void aarch64_any_initfn(struct uc_struct *uc, Object *obj, void *opaque)
{
    ARMCPU *cpu = ARM_CPU(uc, obj);

    set_feature(&cpu->env, ARM_FEATURE_V8);
    set_feature(&cpu->env, ARM_FEATURE_VFP4);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_AARCH64);
    set_feature(&cpu->env, ARM_FEATURE_V8_AES);
    set_feature(&cpu->env, ARM_FEATURE_V8_SHA1);
    set_feature(&cpu->env, ARM_FEATURE_V8_SHA256);
    set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
    set_feature(&cpu->env, ARM_FEATURE_CRC);
    cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */
    cpu->dcz_blocksize = 7; /*  512 bytes */
}
开发者ID:danghvu，项目名称:unicorn，代码行数:16，代码来源:cpu64.c


示例12: arm_any_initfn

static void arm_any_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);
    set_feature(&cpu->env, ARM_FEATURE_V8);
    set_feature(&cpu->env, ARM_FEATURE_VFP4);
    set_feature(&cpu->env, ARM_FEATURE_VFP_FP16);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
    set_feature(&cpu->env, ARM_FEATURE_ARM_DIV);
    set_feature(&cpu->env, ARM_FEATURE_V7MP);
    set_feature(&cpu->env, ARM_FEATURE_CRC);
#ifdef TARGET_AARCH64
    set_feature(&cpu->env, ARM_FEATURE_AARCH64);
#endif
    cpu->midr = 0xffffffff;
}
开发者ID:DeanSinaean，项目名称:qemu，代码行数:16，代码来源:cpu.c


示例13: usb_process_request

//-----------------------------------------------------------------
// usb_process_request:
//-----------------------------------------------------------------
static void usb_process_request(struct device_request *request, unsigned char type, unsigned char req, unsigned char *data)
{
	if ( type == USB_STANDARD_REQUEST )
	{
        // Standard requests
        switch (req)
        {
        case REQ_GET_STATUS:
            get_status(request);
            break;
        case REQ_CLEAR_FEATURE:
            clear_feature(request);
            break;
        case REQ_SET_FEATURE:
            set_feature(request);
            break;
        case REQ_SET_ADDRESS:
            set_address(request);
            break;
        case REQ_GET_DESCRIPTOR:
            get_descriptor(request);
            break;
        case REQ_GET_CONFIGURATION:
            get_configuration(request);
            break;
        case REQ_SET_CONFIGURATION:
            set_configuration(request);
            break;
        case REQ_GET_INTERFACE:
            get_interface(request);
            break;
        case REQ_SET_INTERFACE:
            set_interface(request);
            break;
        default:
            log_printf(USBLOG_ERR, "USB: Unknown standard request %x\n", req);
		    usbhw_control_endpoint_stall();
            break;
        }
	}
	else if ( type == USB_VENDOR_REQUEST )
	{
        log_printf(USBLOG_ERR, "Vendor: Unknown command\n");

        // None supported
		usbhw_control_endpoint_stall();
	}
	else if ( type == USB_CLASS_REQUEST && _class_request)
	{
        _class_request(req, request->wValue, request->wIndex, data, request->wLength);
	}
	else
        usbhw_control_endpoint_stall();
}
开发者ID:freecores，项目名称:usb_device_core，代码行数:57，代码来源:usb_device.c


示例14: aarch64_any_initfn

static void aarch64_any_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);

    set_feature(&cpu->env, ARM_FEATURE_V8);
    set_feature(&cpu->env, ARM_FEATURE_VFP4);
    set_feature(&cpu->env, ARM_FEATURE_VFP_FP16);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
    set_feature(&cpu->env, ARM_FEATURE_ARM_DIV);
    set_feature(&cpu->env, ARM_FEATURE_V7MP);
    set_feature(&cpu->env, ARM_FEATURE_AARCH64);
}
开发者ID:CSRedRat，项目名称:qemu，代码行数:13，代码来源:cpu64.c


示例15: cortex_a15_initfn

static void cortex_a15_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);

    cpu->dtb_compatible = "arm,cortex-a15";
    set_feature(&cpu->env, ARM_FEATURE_V7);
    set_feature(&cpu->env, ARM_FEATURE_VFP4);
    set_feature(&cpu->env, ARM_FEATURE_VFP_FP16);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
    set_feature(&cpu->env, ARM_FEATURE_ARM_DIV);
    set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
    set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
    set_feature(&cpu->env, ARM_FEATURE_LPAE);
    cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A15;
    cpu->midr = 0x412fc0f1;
    cpu->reset_fpsid = 0x410430f0;
    cpu->mvfr0 = 0x10110222;
    cpu->mvfr1 = 0x11111111;
    cpu->ctr = 0x8444c004;
    cpu->reset_sctlr = 0x00c50078;
    cpu->id_pfr0 = 0x00001131;
    cpu->id_pfr1 = 0x00011011;
    cpu->id_dfr0 = 0x02010555;
    cpu->id_afr0 = 0x00000000;
    cpu->id_mmfr0 = 0x10201105;
    cpu->id_mmfr1 = 0x20000000;
    cpu->id_mmfr2 = 0x01240000;
    cpu->id_mmfr3 = 0x02102211;
    cpu->id_isar0 = 0x02101110;
    cpu->id_isar1 = 0x13112111;
    cpu->id_isar2 = 0x21232041;
    cpu->id_isar3 = 0x11112131;
    cpu->id_isar4 = 0x10011142;
    cpu->clidr = 0x0a200023;
    cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */
    cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */
    cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */
    define_arm_cp_regs(cpu, cortexa15_cp_reginfo);
}
开发者ID:DeanSinaean，项目名称:qemu，代码行数:41，代码来源:cpu.c


示例16: arm1136_initfn

static void arm1136_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);
    set_feature(&cpu->env, ARM_FEATURE_V6K);
    set_feature(&cpu->env, ARM_FEATURE_V6);
    set_feature(&cpu->env, ARM_FEATURE_VFP);
    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
    set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
    set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
    cpu->midr = 0x4117b363;
    cpu->reset_fpsid = 0x410120b4;
    cpu->mvfr0 = 0x11111111;
    cpu->mvfr1 = 0x00000000;
    cpu->ctr = 0x1dd20d2;
    cpu->reset_sctlr = 0x00050078;
    cpu->id_pfr0 = 0x111;
    cpu->id_pfr1 = 0x1;
    cpu->id_dfr0 = 0x2;
    cpu->id_afr0 = 0x3;
    cpu->id_mmfr0 = 0x01130003;
    cpu->id_mmfr1 = 0x10030302;
    cpu->id_mmfr2 = 0x01222110;
    cpu->id_isar0 = 0x00140011;
    cpu->id_isar1 = 0x12002111;
    cpu->id_isar2 = 0x11231111;
    cpu->id_isar3 = 0x01102131;
    cpu->id_isar4 = 0x141;
    cpu->reset_auxcr = 7;
}
开发者ID:huixue，项目名称:ttcp，代码行数:29，代码来源:cpu.c


示例17: arm_any_initfn

static void arm_any_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);
    set_feature(&cpu->env, ARM_FEATURE_V8);
    set_feature(&cpu->env, ARM_FEATURE_VFP4);
    set_feature(&cpu->env, ARM_FEATURE_VFP_FP16);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
    set_feature(&cpu->env, ARM_FEATURE_ARM_DIV);
    set_feature(&cpu->env, ARM_FEATURE_V7MP);
    cpu->midr = 0xffffffff;
}
开发者ID:huixue，项目名称:ttcp，代码行数:12，代码来源:cpu.c


示例18: tricore_cpu_realizefn

static void tricore_cpu_realizefn(DeviceState *dev, Error **errp)
{
    CPUState *cs = CPU(dev);
    TriCoreCPU *cpu = TRICORE_CPU(dev);
    TriCoreCPUClass *tcc = TRICORE_CPU_GET_CLASS(dev);
    CPUTriCoreState *env = &cpu->env;

    /* Some features automatically imply others */
    if (tricore_feature(env, TRICORE_FEATURE_161)) {
        set_feature(env, TRICORE_FEATURE_16);
    }

    if (tricore_feature(env, TRICORE_FEATURE_16)) {
        set_feature(env, TRICORE_FEATURE_131);
    }
    if (tricore_feature(env, TRICORE_FEATURE_131)) {
        set_feature(env, TRICORE_FEATURE_13);
    }
    cpu_reset(cs);
    qemu_init_vcpu(cs);

    tcc->parent_realize(dev, errp);
}
开发者ID:AnselZhangGit，项目名称:qemu_stm32，代码行数:23，代码来源:cpu.c


示例19: cortex_a8_initfn

static void cortex_a8_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);

    cpu->dtb_compatible = "arm,cortex-a8";
    set_feature(&cpu->env, ARM_FEATURE_V7);
    set_feature(&cpu->env, ARM_FEATURE_VFP3);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
    cpu->midr = 0x410fc080;
    cpu->reset_fpsid = 0x410330c0;
    cpu->mvfr0 = 0x11110222;
    cpu->mvfr1 = 0x00011100;
    cpu->ctr = 0x82048004;
    cpu->reset_sctlr = 0x00c50078;
    cpu->id_pfr0 = 0x1031;
    cpu->id_pfr1 = 0x11;
    cpu->id_dfr0 = 0x400;
    cpu->id_afr0 = 0;
    cpu->id_mmfr0 = 0x31100003;
    cpu->id_mmfr1 = 0x20000000;
    cpu->id_mmfr2 = 0x01202000;
    cpu->id_mmfr3 = 0x11;
    cpu->id_isar0 = 0x00101111;
    cpu->id_isar1 = 0x12112111;
    cpu->id_isar2 = 0x21232031;
    cpu->id_isar3 = 0x11112131;
    cpu->id_isar4 = 0x00111142;
    cpu->dbgdidr = 0x15141000;
    cpu->clidr = (1 << 27) | (2 << 24) | 3;
    cpu->ccsidr[0] = 0xe007e01a; /* 16k L1 dcache. */
    cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */
    cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */
    cpu->reset_auxcr = 2;
    define_arm_cp_regs(cpu, cortexa8_cp_reginfo);
}
开发者ID:Acidburn0zzz，项目名称:qemu，代码行数:37，代码来源:cpu.c


示例20: cortex_a9_initfn

static void cortex_a9_initfn(Object *obj)
{
    ARMCPU *cpu = ARM_CPU(obj);
    set_feature(&cpu->env, ARM_FEATURE_V7);
    set_feature(&cpu->env, ARM_FEATURE_VFP3);
    set_feature(&cpu->env, ARM_FEATURE_VFP_FP16);
    set_feature(&cpu->env, ARM_FEATURE_NEON);
    set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
    /* Note that A9 supports the MP extensions even for
     * A9UP and single-core A9MP (which are both different
     * and valid configurations; we don't model A9UP).
     */
    set_feature(&cpu->env, ARM_FEATURE_V7MP);
    cpu->midr = 0x410fc090;
    cpu->reset_fpsid = 0x41033090;
    cpu->mvfr0 = 0x11110222;
    cpu->mvfr1 = 0x01111111;
    cpu->ctr = 0x80038003;
    cpu->reset_sctlr = 0x00c50078;
    cpu->id_pfr0 = 0x1031;
    cpu->id_pfr1 = 0x11;
    cpu->id_dfr0 = 0x000;
    cpu->id_afr0 = 0;
    cpu->id_mmfr0 = 0x00100103;
    cpu->id_mmfr1 = 0x20000000;
    cpu->id_mmfr2 = 0x01230000;
    cpu->id_mmfr3 = 0x00002111;
    cpu->id_isar0 = 0x00101111;
    cpu->id_isar1 = 0x13112111;
    cpu->id_isar2 = 0x21232041;
    cpu->id_isar3 = 0x11112131;
    cpu->id_isar4 = 0x00111142;
    cpu->clidr = (1 << 27) | (1 << 24) | 3;
    cpu->ccsidr[0] = 0xe00fe015; /* 16k L1 dcache. */
    cpu->ccsidr[1] = 0x200fe015; /* 16k L1 icache. */
    {
        ARMCPRegInfo cbar = {
            .name = "CBAR", .cp = 15, .crn = 15,  .crm = 0, .opc1 = 4,
            .opc2 = 0, .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar,
            .fieldoffset = offsetof(CPUARMState, cp15.c15_config_base_address)
        };
        define_one_arm_cp_reg(cpu, &cbar);
        define_arm_cp_regs(cpu, cortexa9_cp_reginfo);
    }
}

#ifndef CONFIG_USER_ONLY
static int a15_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri,
                           uint64_t *value)
{
    /* Linux wants the number of processors from here.
     * Might as well set the interrupt-controller bit too.
     */
    *value = ((smp_cpus - 1) << 24) | (1 << 23);
    return 0;
}
开发者ID:huixue，项目名称:ttcp，代码行数:56，代码来源:cpu.c



注：本文中的set_feature函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ set_field函数代码示例发布时间：2022-05-30
下一篇：
C++ set_except_vector函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap