本文整理汇总了C++中set_bootloader_message函数的典型用法代码示例。如果您正苦于以下问题：C++ set_bootloader_message函数的具体用法？C++ set_bootloader_message怎么用？C++ set_bootloader_message使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了set_bootloader_message函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: maybe_install_firmware_update
int maybe_install_firmware_update(const char *send_intent) {
if (update_data == NULL || update_length == 0) return 0;
/* We destroy the cache partition to pass the update image to the
* bootloader, so all we can really do afterwards is wipe cache and reboot.
* Set up this instruction now, in case we're interrupted while writing.
*/
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
strlcpy(boot.recovery, "recovery\n--wipe_cache\n", sizeof(boot.command));
if (send_intent != NULL) {
strlcat(boot.recovery, "--send_intent=", sizeof(boot.recovery));
strlcat(boot.recovery, send_intent, sizeof(boot.recovery));
strlcat(boot.recovery, "\n", sizeof(boot.recovery));
}
if (set_bootloader_message(&boot)) return -1;
int width = 0, height = 0, bpp = 0;
char *busy_image = ui_copy_image(
BACKGROUND_ICON_FIRMWARE_INSTALLING, &width, &height, &bpp);
char *fail_image = ui_copy_image(
BACKGROUND_ICON_FIRMWARE_ERROR, &width, &height, &bpp);
ui_print("Writing %s image...\n", update_type);
if (write_update_for_bootloader(
update_data, update_length,
width, height, bpp, busy_image, fail_image)) {
LOGE("Can't write %s image\n(%s)\n", update_type, strerror(errno));
format_volume("/cache"); // Attempt to clean cache up, at least.
return -1;
}
free(busy_image);
free(fail_image);
/* The update image is fully written, so now we can instruct the bootloader
* to install it. (After doing so, it will come back here, and we will
* wipe the cache and reboot into the system.)
*/
snprintf(boot.command, sizeof(boot.command), "update-%s", update_type);
if (set_bootloader_message(&boot)) {
format_volume("/cache");
return -1;
}
reboot(RB_AUTOBOOT);
// Can't reboot? WTF?
LOGE("Can't reboot\n");
return -1;
}
开发者ID:HyperToxic，项目名称:CWM_REC_6.0.3.2_CHN，代码行数:53，代码来源:firmware.c
示例2: LOGINFO
void TWFunc::Update_Log_File(void) {
// Copy logs to cache so the system can find out what happened.
if (PartitionManager.Mount_By_Path("/cache", false)) {
if (!TWFunc::Path_Exists("/cache/recovery/.")) {
LOGINFO("Recreating /cache/recovery folder.\n");
if (mkdir("/cache/recovery", S_IRWXU | S_IRWXG | S_IWGRP | S_IXGRP) != 0)
LOGINFO("Unable to create /cache/recovery folder.\n");
}
Copy_Log(TMP_LOG_FILE, "/cache/recovery/log");
copy_file("/cache/recovery/log", "/cache/recovery/last_log", 600);
chown("/cache/recovery/log", 1000, 1000);
chmod("/cache/recovery/log", 0600);
chmod("/cache/recovery/last_log", 0640);
} else {
LOGINFO("Failed to mount /cache for TWFunc::Update_Log_File\n");
}
// Reset bootloader message
TWPartition* Part = PartitionManager.Find_Partition_By_Path("/misc");
if (Part != NULL) {
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
if (set_bootloader_message(&boot) != 0)
LOGERR("Unable to set bootloader message.\n");
}
if (PartitionManager.Mount_By_Path("/cache", true)) {
if (unlink("/cache/recovery/command") && errno != ENOENT) {
LOGINFO("Can't unlink %s\n", "/cache/recovery/command");
}
}
sync();
}
开发者ID:marignygrisgris，项目名称:TWRP-Homebuild，代码行数:34，代码来源:twrp-functions.cpp
示例3: wipe_item_show
STATUS wipe_item_show(menuUnit *p)
{
/* OPPO 2013-01-17 jizhengkang azx Add begin for reason */
struct bootloader_message boot;
/* OPPO 2013-01-17 jizhengkang Add end */
int wipe_result;
oppo_debug("start .....\n");
if (RET_YES == oppo_confirm(3, p->name, p->desc, p->icon)) {
wipe_result = oppo_wipe_items(p->result);
/* OPPO 2013-01-17 jizhengkang azx Add begin for reason */
if (!(wipe_result%2)) {
memset(&boot, 0, sizeof(boot));
set_bootloader_message(&boot);
strncpy(p->title_name, "<~wipe.result.success.title>", MENU_LEN);
} else {
strncpy(p->title_name, "<~wipe.result.failed.title>", MENU_LEN);
}
/* OPPO 2013-01-17 jizhengkang Add end */
wipe_result_confirm(p, wipe_result);
wipe_item_show_end = 1;
selectedCount--;
}
/* OPPO 2013-02-18 jizhengkang azx Add begin for reason */
selectedCount--;
/* OPPO 2013-02-18 jizhengkang azx Add end */
oppo_debug("end...\n");
return MENU_BACK;
}
开发者ID:Jiangyi，项目名称:12055，代码行数:30，代码来源:wipe_ui.c
示例4: mt_set_bootloader_message
/* Write bootloader paramenter block */
int mt_set_bootloader_message(const char *command, const char *status, const char *stage,
const char *fmt, ...)
{
int ret;
int i;
struct bootloader_message boot;
va_list vl;
memset(&boot, 0, sizeof(boot));
if (command)
strlcpy(boot.command, command, sizeof(boot.command));
if (status)
strlcpy(boot.status, status, sizeof(boot.status));
if (stage)
strlcpy(boot.stage, stage, sizeof(boot.stage));
if (fmt) {
va_start(vl, fmt);
ret = vsprintf(boot.recovery, fmt, vl);
va_end(vl);
}
ret = set_bootloader_message(&boot);
sync();
return ret;
}
开发者ID:bju2000，项目名称:MT6797，代码行数:28，代码来源:mt_bootloader.cpp
示例5: finish_recovery
// clear the recovery command and prepare to boot a (hopefully working) system,
// copy our log file to cache as well (for the system to read), and
// record any intent we were asked to communicate back to the system.
// this function is idempotent: call it as many times as you like.
static void
finish_recovery(const char *send_intent) {
// By this point, we're ready to return to the main system...
if (send_intent != NULL) {
FILE *fp = fopen_path(INTENT_FILE, "w");
if (fp == NULL) {
LOGE("Can't open %s\n", INTENT_FILE);
} else {
fputs(send_intent, fp);
check_and_fclose(fp, INTENT_FILE);
}
}
// Copy logs to cache so the system can find out what happened.
copy_log_file(LOG_FILE, true);
copy_log_file(LAST_LOG_FILE, false);
chmod(LAST_LOG_FILE, 0640);
// Reset to normal system boot so recovery won't cycle indefinitely.
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
set_bootloader_message(&boot);
// Remove the command file, so recovery won't repeat indefinitely.
if (ensure_path_mounted(COMMAND_FILE) != 0 ||
(unlink(COMMAND_FILE) && errno != ENOENT)) {
LOGW("Can't unlink %s\n", COMMAND_FILE);
}
sync(); // For good measure.
}
开发者ID:xiangxin19960319，项目名称:android_bootable_recovery_cn_ics，代码行数:35，代码来源:recovery.c
示例6: reset_mark_block
static void reset_mark_block(void)
{
// Reset the bootloader message to revert to a normal main system boot.
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
set_bootloader_message(&boot);
sync();
}
开发者ID:Besik13，项目名称:iq450_H2_mt6589，代码行数:8，代码来源:install.cpp
示例7: set_sdcard_update_bootloader_message
static void
set_sdcard_update_bootloader_message() {
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
strlcpy(boot.recovery, "recovery\n", sizeof(boot.recovery));
set_bootloader_message(&boot);
}
开发者ID:JCROM-Android，项目名称:jcrom_bootable_recovery_，代码行数:8，代码来源:recovery.cpp
示例8: install_firmware_update
int install_firmware_update(const char *update_type,
const char *update_data,
size_t update_length,
int width, int height, int bpp,
const char* busy_image,
const char* fail_image,
const char *log_filename) {
if (update_data == NULL || update_length == 0) return 0;
mtd_scan_partitions();
/* We destroy the cache partition to pass the update image to the
* bootloader, so all we can really do afterwards is wipe cache and reboot.
* Set up this instruction now, in case we're interrupted while writing.
*/
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
strlcpy(boot.recovery, "recovery\n--wipe_cache\n", sizeof(boot.command));
if (set_bootloader_message(&boot)) return -1;
if (write_update_for_bootloader(
update_data, update_length,
width, height, bpp, busy_image, fail_image, log_filename)) {
LOGE("Can't write %s image\n(%s)\n", update_type, strerror(errno));
return -1;
}
/* The update image is fully written, so now we can instruct the bootloader
* to install it. (After doing so, it will come back here, and we will
* wipe the cache and reboot into the system.)
*/
snprintf(boot.command, sizeof(boot.command), "update-%s", update_type);
if (set_bootloader_message(&boot)) {
return -1;
}
reboot(RB_AUTOBOOT);
// Can't reboot? WTF?
LOGE("Can't reboot\n");
return -1;
}
开发者ID:longlinht，项目名称:android_source，代码行数:44，代码来源:firmware.c
示例9: get_args
static void
get_args(int *argc, char ***argv)
{
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
get_bootloader_message(&boot); // this may fail, leaving a zeroed structure
if (boot.command[0] != 0 && boot.command[0] != 255)
LOGI("Boot command: %.*s\n", sizeof(boot.command), boot.command);
if (boot.status[0] != 0 && boot.status[0] != 255)
LOGI("Boot status: %.*s\n", sizeof(boot.status), boot.status);
// --- if arguments weren't supplied, look in the bootloader control block
if (*argc <= 1)
{
boot.recovery[sizeof(boot.recovery) - 1] = '\0'; // Ensure termination
const char *arg = strtok(boot.recovery, "\n");
if (arg != NULL && !strcmp(arg, "recovery"))
{
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = strdup(arg);
for (*argc = 1; *argc < MAX_ARGS; ++*argc)
{
if ((arg = strtok(NULL, "\n")) == NULL)
break;
(*argv)[*argc] = strdup(arg);
}
LOGI("Got arguments from boot message\n");
}
else if (boot.recovery[0] != 0 && boot.recovery[0] != 255)
LOGE("Bad boot message\n\"%.20s\"\n", boot.recovery);
}
// --- if that doesn't work, try the command file
if (*argc <= 1)
get_cmd_file_args(argc, argv);
// --> write the arguments we have back into the bootloader control block
// always boot into recovery after this (until finish_recovery() is called)
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
strlcpy(boot.recovery, "recovery\n", sizeof(boot.recovery));
int i;
for (i = 1; i < *argc; ++i)
{
strlcat(boot.recovery, (*argv)[i], sizeof(boot.recovery));
strlcat(boot.recovery, "\n", sizeof(boot.recovery));
}
set_bootloader_message(&boot);
}
开发者ID:Mioze7Ae，项目名称:openrecovery，代码行数:53，代码来源:recovery.c
示例10: reset_deltaupdate_recovery_bootmessage
static void reset_deltaupdate_recovery_bootmessage(void)
{
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
LOGI("Resetting recovery boot...\n");
set_bootloader_message(&boot);
LOGI("boot.command=%s\n",boot.command);
LOGI("boot.recovery=%s\n",boot.recovery);
}
开发者ID:ebmajor，项目名称:msm7627a_2038_recovery，代码行数:13，代码来源:recovery.c
示例11: get_args
// command line args come from, in decreasing precedence:
// - the actual command line
// - the bootloader control block (one per line, after "recovery")
// - the contents of COMMAND_FILE (one per line)
static void
get_args(int *argc, char ***argv) {
if (*argc > 1) return; // actual command line arguments take priority
char *argv0 = (*argv)[0];
struct bootloader_message boot;
if (!get_bootloader_message(&boot)) {
if (boot.command[0] != 0 && boot.command[0] != 255) {
LOGI("Boot command: %.*s\n", sizeof(boot.command), boot.command);
}
if (boot.status[0] != 0 && boot.status[0] != 255) {
LOGI("Boot status: %.*s\n", sizeof(boot.status), boot.status);
}
// Ensure that from here on, a reboot goes back into recovery
strcpy(boot.command, "boot-recovery");
set_bootloader_message(&boot);
boot.recovery[sizeof(boot.recovery) - 1] = '\0'; // Ensure termination
const char *arg = strtok(boot.recovery, "\n");
if (arg != NULL && !strcmp(arg, "recovery")) {
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = argv0;
for (*argc = 1; *argc < MAX_ARGS; ++*argc) {
if ((arg = strtok(NULL, "\n")) == NULL) break;
(*argv)[*argc] = strdup(arg);
}
LOGI("Got arguments from boot message\n");
return;
} else if (boot.recovery[0] != 0 && boot.recovery[0] != 255) {
LOGE("Bad boot message\n\"%.20s\"\n", boot.recovery);
}
}
FILE *fp = fopen_root_path(COMMAND_FILE, "r");
if (fp == NULL) return;
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = argv0; // use the same program name
char buf[MAX_ARG_LENGTH];
for (*argc = 1; *argc < MAX_ARGS && fgets(buf, sizeof(buf), fp); ++*argc) {
(*argv)[*argc] = strdup(strtok(buf, "\r\n")); // Strip newline.
}
check_and_fclose(fp, COMMAND_FILE);
LOGI("Got arguments from %s\n", COMMAND_FILE);
}
开发者ID:Jib-BAOSP，项目名称:platform_recovery，代码行数:53，代码来源:recovery.c
示例12: finish_recovery
// clear the recovery command and prepare to boot a (hopefully working) system,
// copy our log file to cache as well (for the system to read), and
// record any intent we were asked to communicate back to the system.
// this function is idempotent: call it as many times as you like.
static void
finish_recovery(const char *send_intent) {
// By this point, we're ready to return to the main system...
if (send_intent != NULL) {
FILE *fp = fopen_root_path(INTENT_FILE, "w");
if (fp == NULL) {
LOGE("Can't open %s\n", INTENT_FILE);
} else {
fputs(send_intent, fp);
check_and_fclose(fp, INTENT_FILE);
}
}
// Copy logs to cache so the system can find out what happened.
FILE *log = fopen_root_path(LOG_FILE, "a");
if (log == NULL) {
LOGE("Can't open %s\n", LOG_FILE);
} else {
FILE *tmplog = fopen(TEMPORARY_LOG_FILE, "r");
if (tmplog == NULL) {
LOGE("Can't open %s\n", TEMPORARY_LOG_FILE);
} else {
static long tmplog_offset = 0;
fseek(tmplog, tmplog_offset, SEEK_SET); // Since last write
char buf[4096];
while (fgets(buf, sizeof(buf), tmplog)) fputs(buf, log);
tmplog_offset = ftell(tmplog);
check_and_fclose(tmplog, TEMPORARY_LOG_FILE);
}
check_and_fclose(log, LOG_FILE);
}
#ifndef BOARD_HAS_NO_MISC_PARTITION
// Reset to mormal system boot so recovery won't cycle indefinitely.
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
set_bootloader_message(&boot);
#endif
// Remove the command file, so recovery won't repeat indefinitely.
char path[PATH_MAX] = "";
if (ensure_root_path_mounted(COMMAND_FILE) != 0 ||
translate_root_path(COMMAND_FILE, path, sizeof(path)) == NULL ||
(unlink(path) && errno != ENOENT)) {
LOGW("Can't unlink %s\n", COMMAND_FILE);
}
sync(); // For good measure.
}
开发者ID:bandroidx，项目名称:bravo_recovery，代码行数:53，代码来源:recovery.c
示例13: finish_recovery
// clear the recovery command and prepare to boot a (hopefully working) system,
// copy our log file to cache as well (for the system to read), and
// record any intent we were asked to communicate back to the system.
// this function is idempotent: call it as many times as you like.
static void
finish_recovery(const char *send_intent) {
// By this point, we're ready to return to the main system...
if (send_intent != NULL) {
FILE *fp = fopen_path(INTENT_FILE, "w");
if (fp == NULL) {
LOGE("Can't open %s\n", INTENT_FILE);
} else {
fputs(send_intent, fp);
check_and_fclose(fp, INTENT_FILE);
}
}
// Save the locale to cache, so if recovery is next started up
// without a --locale argument (eg, directly from the bootloader)
// it will use the last-known locale.
if (locale != NULL) {
LOGI("Saving locale \"%s\"\n", locale);
FILE* fp = fopen_path(LOCALE_FILE, "w");
fwrite(locale, 1, strlen(locale), fp);
fflush(fp);
fsync(fileno(fp));
check_and_fclose(fp, LOCALE_FILE);
}
// Copy logs to cache so the system can find out what happened.
copy_log_file(TEMPORARY_LOG_FILE, LOG_FILE, true);
copy_log_file(TEMPORARY_LOG_FILE, LAST_LOG_FILE, false);
copy_log_file(TEMPORARY_INSTALL_FILE, LAST_INSTALL_FILE, false);
chmod(LOG_FILE, 0600);
chown(LOG_FILE, 1000, 1000); // system user
chmod(LAST_LOG_FILE, 0640);
chmod(LAST_INSTALL_FILE, 0644);
// Reset to normal system boot so recovery won't cycle indefinitely.
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
set_bootloader_message(&boot);
// Remove the command file, so recovery won't repeat indefinitely.
if (ensure_path_mounted(COMMAND_FILE) != 0 ||
(unlink(COMMAND_FILE) && errno != ENOENT)) {
LOGW("Can't unlink %s\n", COMMAND_FILE);
}
ensure_path_unmounted(CACHE_ROOT);
sync(); // For good measure.
}
开发者ID:menghang，项目名称:a31_422_v33_android，代码行数:52，代码来源:recovery.cpp
示例14: main
int main(int argc, char *argv[])
{
struct bootloader_message boot;
const char *command = 0, *status = 0, *recovery = 0;
int opt, write = 0;
while ((opt = getopt(argc, argv, "c:s:r:wh")) != -1) {
switch (opt) {
case 'c':
command = strdup(optarg);
break;
case 's':
status = strdup(optarg);
break;
case 'r':
recovery = strdup(optarg);
break;
case 'w':
write = 1;
break;
case 'h':
usage();
return 0;
default:
usage();
return -1;
}
}
memset(&boot, 0, sizeof(boot));
get_bootloader_message(&boot);
if (write) {
if (command)
strncpy(boot.command, command, sizeof(boot.command));
if (status)
strncpy(boot.status, status, sizeof(boot.status));
if (recovery)
strncpy(boot.recovery, recovery, sizeof(boot.recovery));
set_bootloader_message(&boot);
} else {
fprintf(stdout, "command=%s\nstatus=%s\nrecovery=%s\n",
boot.command, boot.status, boot.recovery);
}
return 0;
}
开发者ID:liangxiaoju，项目名称:codes，代码行数:46，代码来源:blmessage.c
示例15: set_deltaupdate_recovery_bootmessage
static void set_deltaupdate_recovery_bootmessage(void)
{
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
LOGI("Setting recovery boot...\n");
if(MAX_NUM_UPDATE_RECOVERY > get_deltaupdate_recoverycount())
{
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
strlcpy(boot.recovery, "recovery\n", sizeof(boot.recovery));
}
else
{
LOGI("Recovery mode reached maximum retry. Clear boot message.\n");
}
set_bootloader_message(&boot);
LOGI("boot.command=%s\n",boot.command);
LOGI("boot.recovery=%s\n",boot.recovery);
}
开发者ID:ebmajor，项目名称:msm7627a_2038_recovery，代码行数:21，代码来源:recovery.c
示例16: set_recovery
MOTOBOX_CONFIG_ERR_T set_recovery()
{
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
if(get_bootloader_message(&boot)) {
return MOTOBOX_CONFIG_ERR_SET_RECOVERY;
}
if (boot.command[0] != 0 && boot.command[0] != 255) {
LOGI("Boot command: %.*s\n", sizeof(boot.command), boot.command);
if( !strcmp(boot.command,"boot-recovery")){
/* already been set to boot-recovery to the command file */
if(set_cache_command() != MOTOBOX_CONFIG_ERR_NONE) {
return MOTOBOX_CONFIG_ERR_SET_RECOVERY;
}
} else {
/* not boot-recovery command, we quit it */
LOGE("Busy, try setconfig later");
return MOTOBOX_CONFIG_ERR_SET_RECOVERY;
}
} else {
/* misc is clean , set the boot-recovery command */
char command_buf[255];
memset(command_buf, 0, sizeof(command_buf));
strncpy(command_buf, RECOVERY_COMMAND, sizeof(command_buf)-1);
memset(&boot, 0, sizeof(boot));
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
strlcpy(boot.recovery, command_buf, sizeof(boot.recovery));
if (set_bootloader_message(&boot)) {
return MOTOBOX_CONFIG_ERR_SET_RECOVERY;
}
}
return MOTOBOX_CONFIG_ERR_NONE;
}
开发者ID:CarbonDev，项目名称:android_device_motorola_omap4-common，代码行数:40，代码来源:setconfig.c
示例17: start_firmware_update
int start_firmware_update(char *update_type, char *part_type)
{
int result;
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
if(!strcmp(part_type, "mtd"))
{
mtd_scan_partitions();
strlcpy(boot.recovery, "recovery\n--radio_status\n", sizeof(boot.command));
snprintf(boot.command, sizeof(boot.command), "update-%s", update_type);
if (set_bootloader_message(&boot)) {
return -1;
}
}
else if(!strcmp(part_type, "emmc"))
{
Volume *v = NULL;
load_volume_table();
v = volume_for_path("/sys_boot");
if (strcmp(v->fs_type, "vfat"))
{
LOGE("Error in fs_type for sys_boot partition\n");
return -1;
}
mkdir("/sys_boot", 777);
/* Try mounting device first */
result = mount(v->device, v->mount_point, v->fs_type,
MS_NOATIME | MS_NODEV | MS_NODIRATIME, "");
if(result)
{
/* Try mounting device2 next */
result = mount(v->device2, v->mount_point, v->fs_type,
MS_NOATIME | MS_NODEV | MS_NODIRATIME, "");
}
if(result == 0)
{
/* Creating cookie file for radio update */
FILE *fp = fopen("/sys_boot/upcookie.txt", "w");
fclose(fp);
/* Unmount the sdcard now */
if(umount(v->mount_point))
{
LOGE("Error in unmounting %s\n",v->mount_point);
return -1;
}
else
LOGI("Created cookie file for eMMC radio update\n");
}
else
{
LOGE("Error in mounting %s\n",v->mount_point);
return -1;
}
memset(&boot, 0, sizeof(boot));
v = volume_for_path("/misc");
if (set_bootloader_message_emmc(&boot, v)) {
return -1;
}
}
else
{
LOGE("Error in part_type %s\n",part_type);
return -1;
}
sync();
reboot(RB_AUTOBOOT);
// Can't reboot? WTF?
LOGE("Can't reboot\n");
return -1;
}
开发者ID:Wawan999，项目名称:unknown_device_samsung，代码行数:80，代码来源:firmware.c
示例18: get_args
// command line args come from, in decreasing precedence:
// - the actual command line
// - the bootloader control block (one per line, after "recovery")
// - the contents of COMMAND_FILE (one per line)
static void
get_args(int *argc, char ***argv) {
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
get_bootloader_message(&boot); // this may fail, leaving a zeroed structure
stage = strndup(boot.stage, sizeof(boot.stage));
if (boot.command[0] != 0 && boot.command[0] != 255) {
LOGI("Boot command: %.*s\n", (int)sizeof(boot.command), boot.command);
}
if (boot.status[0] != 0 && boot.status[0] != 255) {
LOGI("Boot status: %.*s\n", (int)sizeof(boot.status), boot.status);
}
// --- if arguments weren't supplied, look in the bootloader control block
if (*argc <= 1) {
boot.recovery[sizeof(boot.recovery) - 1] = '\0'; // Ensure termination
const char *arg = strtok(boot.recovery, "\n");
if (arg != NULL && !strcmp(arg, "recovery")) {
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = strdup(arg);
for (*argc = 1; *argc < MAX_ARGS; ++*argc) {
if ((arg = strtok(NULL, "\n")) == NULL) break;
(*argv)[*argc] = strdup(arg);
}
LOGI("Got arguments from boot message\n");
} else if (boot.recovery[0] != 0 && boot.recovery[0] != 255) {
LOGE("Bad boot message\n\"%.20s\"\n", boot.recovery);
}
}
// --- if that doesn't work, try the command file
if (*argc <= 1) {
FILE *fp = fopen_path(COMMAND_FILE, "r");
if (fp != NULL) {
char *token;
char *argv0 = (*argv)[0];
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = argv0; // use the same program name
char buf[MAX_ARG_LENGTH];
for (*argc = 1; *argc < MAX_ARGS; ++*argc) {
if (!fgets(buf, sizeof(buf), fp)) break;
token = strtok(buf, "\r\n");
if (token != NULL) {
(*argv)[*argc] = strdup(token); // Strip newline.
} else {
--*argc;
}
}
check_and_fclose(fp, COMMAND_FILE);
LOGI("Got arguments from %s\n", COMMAND_FILE);
}
}
// --> write the arguments we have back into the bootloader control block
// always boot into recovery after this (until finish_recovery() is called)
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
strlcpy(boot.recovery, "recovery\n", sizeof(boot.recovery));
int i;
for (i = 1; i < *argc; ++i) {
strlcat(boot.recovery, (*argv)[i], sizeof(boot.recovery));
strlcat(boot.recovery, "\n", sizeof(boot.recovery));
}
set_bootloader_message(&boot);
}
开发者ID:JCROM-Android，项目名称:jcrom_bootable_recovery_，代码行数:72，代码来源:recovery.cpp
示例19: get_args
//.........这里部分代码省略.........
}
}
LOGI("Got arguments from bootloader\n");
}
} else {
LOGE("Bad bootloader arguments\n\"%.20s\"\n", recovery_command);
}
}
// --- if that doesn't work, try the command file
char * temp_args =NULL;
if (*argc <= 1) {
FILE *fp = fopen_path(COMMAND_FILE, "r");
if (fp != NULL) {
char *argv0 = (*argv)[0];
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = argv0; // use the same program name
char buf[MAX_ARG_LENGTH];
for (*argc = 1; *argc < MAX_ARGS; ) {
if (!fgets(buf, sizeof(buf), fp)) break;
temp_args = strtok(buf, "\r\n");
if(temp_args == NULL) continue;
(*argv)[*argc] = strdup(temp_args); // Strip newline.
++*argc;
}
check_and_fclose(fp, COMMAND_FILE);
LOGI("Got arguments from %s\n", COMMAND_FILE);
}
}
// -- sleep 1 second to ensure SD card initialization complete
usleep(1000000);
// --- if that doesn't work, try the sdcard command file
if (*argc <= 1) {
FILE *fp = fopen_path(SDCARD_COMMAND_FILE, "r");
if (fp != NULL) {
char *argv0 = (*argv)[0];
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = argv0; // use the same program name
char buf[MAX_ARG_LENGTH];
for (*argc = 1; *argc < MAX_ARGS; ) {
if (!fgets(buf, sizeof(buf), fp)) break;
temp_args = strtok(buf, "\r\n");
if(temp_args == NULL) continue;
(*argv)[*argc] = strdup(temp_args); // Strip newline.
++*argc;
}
check_and_fclose(fp, SDCARD_COMMAND_FILE);
LOGI("Got arguments from %s\n", SDCARD_COMMAND_FILE);
}
}
// --- if that doesn't work, try the udisk command file
if (*argc <= 1) {
FILE *fp = fopen_path(UDISK_COMMAND_FILE, "r");
if (fp != NULL) {
char *argv0 = (*argv)[0];
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = argv0; // use the same program name
char buf[MAX_ARG_LENGTH];
for (*argc = 1; *argc < MAX_ARGS; ) {
if (!fgets(buf, sizeof(buf), fp)) break;
temp_args = strtok(buf, "\r\n");
if(temp_args == NULL) continue;
(*argv)[*argc] = strdup(temp_args); // Strip newline.
++*argc;
}
check_and_fclose(fp, UDISK_COMMAND_FILE);
LOGI("Got arguments from %s\n", UDISK_COMMAND_FILE);
}
}
// --- if no argument, then force show_text
if (*argc <= 1) {
char *argv0 = (*argv)[0];
*argv = (char **) malloc(sizeof(char *) * MAX_ARGS);
(*argv)[0] = argv0; // use the same program name
(*argv)[1] = "--show_text";
*argc = 2;
}
// --> write the arguments we have back into the bootloader control block
// always boot into recovery after this (until finish_recovery() is called)
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
strlcpy(boot.recovery, "recovery\n", sizeof(boot.recovery));
int i;
for (i = 1; i < *argc; ++i) {
strlcat(boot.recovery, (*argv)[i], sizeof(boot.recovery));
strlcat(boot.recovery, "\n", sizeof(boot.recovery));
}
set_bootloader_message(&boot);
}
开发者ID:fards，项目名称:ainol_elfii_bootable，代码行数:101，代码来源:recovery.c
示例20: main
int
main(int argc, char **argv) {
if (strcmp(basename(argv[0]), "recovery") != 0)
{
if (strstr(argv[0], "flash_image") != NULL)
return flash_image_main(argc, argv);
if (strstr(argv[0], "dump_image") != NULL)
return dump_image_main(argc, argv);
if (strstr(argv[0], "erase_image") != NULL)
return erase_image_main(argc, argv);
if (strstr(argv[0], "mkyaffs2image") != NULL)
return mkyaffs2image_main(argc, argv);
if (strstr(argv[0], "unyaffs") != NULL)
return unyaffs_main(argc, argv);
if (strstr(argv[0], "nandroid"))
return nandroid_main(argc, argv);
if (strstr(argv[0], "reboot"))
return reboot_main(argc, argv);
#ifdef BOARD_RECOVERY_HANDLES_MOUNT
if (strstr(argv[0], "mount") && argc == 2 && !strstr(argv[0], "umount"))
{
load_volume_table();
return ensure_path_mounted(argv[1]);
}
#endif
if (strstr(argv[0], "poweroff")){
return reboot_main(argc, argv);
}
}
__system("/sbin/postrecoveryboot.sh");
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
#ifndef DEBUG
unlink(TEMPORARY_LOG_FILE);
#endif
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
printf("Starting recovery on %s", ctime(&start));
//miuiIntent init
miuiIntent_init(10);
miuiIntent_register(INTENT_MOUNT, &intent_mount);
miuiIntent_register(INTENT_ISMOUNT, &intent_ismount);
miuiIntent_register(INTENT_UNMOUNT, &intent_unmount);
miuiIntent_register(INTENT_REBOOT, &intent_reboot);
miuiIntent_register(INTENT_INSTALL, &intent_install);
miuiIntent_register(INTENT_WIPE, &intent_wipe);
miuiIntent_register(INTENT_TOGGLE, &intent_toggle);
miuiIntent_register(INTENT_FORMAT, &intent_format);
miuiIntent_register(INTENT_RESTORE, &intent_restore);
miuiIntent_register(INTENT_BACKUP, &intent_backup);
miuiIntent_register(INTENT_ADVANCED_BACKUP, &intent_advanced_backup);
miuiIntent_register(INTENT_SYSTEM, &intent_system);
miuiIntent_register(INTENT_COPY, &intent_copy);
device_ui_init();
load_volume_table();
get_args(&argc, &argv);
struct bootloader_message boot;
memset(&boot, 0, sizeof(boot));
set_bootloader_message(&boot);
create_fstab();
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w': wipe_data = wipe_cache = 1; break;
case 'c': wipe_cache = 1; break;
//case 't': ui_show_text(1); break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
device_recovery_start();
printf("Command:");
for (arg = 0; arg < argc; arg++) {
printf(" \"%s\"", argv[arg]);
}
printf("\n");
if (update_package) {
// For backwards compatibility on the cache partition only, if
// we're given an old 'root' path "CACHE:foo", change it to
// "/cache/foo".
if (strncmp(update_package, "CACHE:", 6) == 0) {
int len = strlen(update_package) + 10;
char* modified_path = malloc(len);
strlcpy(modified_path, "/cache/", len);
//.........这里部分代码省略.........
开发者ID:TheNameIsNigel，项目名称:miui_recovery，代码行数:101，代码来源:recovery.c
注：本文中的set_bootloader_message函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论