C++ setParity函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中setParity函数的典型用法代码示例。如果您正苦于以下问题：C++ setParity函数的具体用法？C++ setParity怎么用？C++ setParity使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了setParity函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: setBaud

void NetworkManager::SerialSetting::fromMap(const QVariantMap &setting)
{
    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_BAUD))) {
        setBaud(setting.value(QLatin1String(NM_SETTING_SERIAL_BAUD)).toUInt());
    }

    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_BITS))) {
        setBits(setting.value(QLatin1String(NM_SETTING_SERIAL_BITS)).toUInt());
    }

    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_PARITY))) {
        QChar character = setting.value(QLatin1String(NM_SETTING_SERIAL_PARITY)).toChar();

        if (character == 'n') {
            setParity(NoParity);
        } else if (character == 'E') {
            setParity(EvenParity);
        } else if (character == 'o') {
            setParity(OddParity);
        }
    }

    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_STOPBITS))) {
        setStopbits(setting.value(QLatin1String(NM_SETTING_SERIAL_STOPBITS)).toUInt());
    }

    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_SEND_DELAY))) {
        setSendDelay((Setting::SecretFlagType)setting.value(QLatin1String(NM_SETTING_SERIAL_SEND_DELAY)).toULongLong());
    }
}

开发者ID:Bridges，项目名称:libnm-qt5，代码行数:30，代码来源:serialsetting.cpp

示例2: switch

bool serial::setFormat (format_t fmt)
{
	bool r = true;

	switch(fmt) {
	case serial::Format7E1:
		r &= setDatabits(serial::DB7);
		r &= setStopbits(serial::SB1);
		r &= setParity(serial::ParityEven);
		break;
	case serial::Format7O1:
		r &= setDatabits(serial::DB7);
		r &= setStopbits(serial::SB1);
		r &= setParity(serial::ParityOdd);
		break;
	case serial::Format8N1:
	default:
		r &= setDatabits(serial::DB8);
		r &= setStopbits(serial::SB1);
		r &= setParity(serial::ParityNone);
		break;
	}

	return r;
}

开发者ID:semenovf，项目名称:pfs-io-serial，代码行数:25，代码来源:serial.cpp

示例3: m_fd

SerialPort::SerialPort(const string device)
	: m_fd(0), m_baudRate(0), m_wordSize(0), m_asyncTimeout(DEFAULT_ASYNC_TIMEOUT)
{
	if((m_fd = ::open(device.c_str(), O_RDWR | O_NOCTTY)) < 0)
		throw SysException();

	::bzero(&m_term, sizeof(m_term));

	::tcgetattr(m_fd, &m_termOld);

	setBaudRate(DEFAULT_BAUD_RATE);
	setWordSize(DEFAULT_WORD_SIZE);
	setParity(DEFAULT_PARITY);

	m_term.c_cflag |= CLOCAL | CREAD;
	m_term.c_iflag = IGNPAR;
	m_term.c_oflag = OPOST;
	m_term.c_lflag = 0;

	m_term.c_cc[VTIME] = 0;
	m_term.c_cc[VMIN] = 1;

	setAttr();

	if(::fcntl(m_fd, F_SETOWN, getpid()) == -1)
		throw SysException();
}

开发者ID:stuartatpeasy，项目名称:m68k-system，代码行数:27，代码来源:serialport.C

示例4: openTouchDev

static int openTouchDev( char const *devName ){
   int fd = -1 ;
   if( !isSerial(devName) ){
      fd = open(devName, O_RDONLY);
   }
   else {
      printf( "Serial touch screen\n" );
      char const *end = strchr( devName, ',' );
      if( 0 == end )
         end = devName + strlen(devName);
      unsigned nameLen = end-devName ;
      printf( "nameLen: %u, end %p\n", nameLen, end );
      char deviceName[512];
      if( nameLen < sizeof(deviceName) ){
         memcpy( deviceName, devName, nameLen );
         deviceName[nameLen] = '\0' ;
         unsigned baud = 9600 ;
         unsigned databits = 8 ;
         char parity = 'N' ;
         unsigned stop = 1 ;
         if( '\0' != *end ){
            end++ ;
            baud = 0 ; 
            while( isdigit(*end) ){
               baud *= 10 ;
               baud += ( *end-'0' );
               end++ ;
            }

            if( ',' == *end ){
               end++ ;
               databits = *end-'0' ;
               end++ ;
               if( ',' == *end ){
                  end++ ;
                  parity = *end++ ;
                  if( ',' == *end ){
                     stop = end[1] - '0';
                  }
               }
            }
         }
         fd = open( deviceName, O_RDWR );
         if( 0 < fd ){
            printf( "settings: %s,%u,%u,%c,%u\n", deviceName, baud, databits, parity, stop );
            setBaud( fd, baud );
            setRaw( fd );
            setDataBits( fd, databits );
            setStopBits( fd, stop );
            setParity( fd, parity );
         }
         else
            perror( deviceName );
      }
      else
         fprintf( stderr, "Invalid touch device name\n" );
   }

   return fd ;
}

开发者ID:boundarydevices，项目名称:bdScript，代码行数:60，代码来源:touchPoll.cpp

示例5: LOCK_MUTEX

/*!
\fn bool Posix_QextSerialPort::open(int=0)
Opens a serial port.  Note that this function does not specify which device to open.  If you need
to open a device by name, see Posix_QextSerialPort::open(const char*).  This function has no 
effect if the port associated with the class is already open.  The port is also configured to the 
current settings, as stored in the Settings structure.
*/
bool Posix_QextSerialPort::open(int) {
    LOCK_MUTEX();
    if (!portOpen) {

        /*open the port*/
        Posix_File->setName(portName);
        if (Posix_File->open(IO_Async|IO_Raw|IO_ReadWrite)) {
            portOpen=true;
        }

        /*configure port settings*/
        tcgetattr(Posix_File->handle(), &Posix_CommConfig);

        /*set up other port settings*/
        Posix_CommConfig.c_cflag|=CREAD|CLOCAL;
        Posix_CommConfig.c_lflag&=(~(ICANON|ECHO|ECHOE|ECHOK|ECHONL|ISIG));
        Posix_CommConfig.c_iflag&=(~(INPCK|IGNPAR|PARMRK|ISTRIP|IXANY));
        Posix_CommConfig.c_oflag&=(~OPOST);
        Posix_CommConfig.c_cc[VMIN]=0;
        Posix_CommConfig.c_cc[VINTR] = _POSIX_VDISABLE; 
        Posix_CommConfig.c_cc[VQUIT] = _POSIX_VDISABLE; 
        Posix_CommConfig.c_cc[VSTART] = _POSIX_VDISABLE; 
        Posix_CommConfig.c_cc[VSTOP] = _POSIX_VDISABLE; 
        Posix_CommConfig.c_cc[VSUSP] = _POSIX_VDISABLE; 
        setBaudRate(Settings.BaudRate);
        setDataBits(Settings.DataBits);
        setStopBits(Settings.StopBits);
        setParity(Settings.Parity);
        setFlowControl(Settings.FlowControl);
        setTimeout(Posix_Copy_Timeout.tv_sec, Posix_Copy_Timeout.tv_usec);
        tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
    }
    UNLOCK_MUTEX();
    return portOpen;
}

开发者ID:BackupTheBerlios，项目名称:poa，代码行数:42，代码来源:posix_qextserialport.cpp

示例6: tcgetattr

bool QSerialPort::open(int block)
{
	if( block== 1) portDesc = ::open(portName.toAscii(),O_RDWR);
	else portDesc = ::open(portName.toAscii(),O_RDWR | O_NONBLOCK );
	if(portDesc == -1)
	{
		return false;
	}
	portOpen = true;

	tcgetattr(portDesc, &portConfig);
	
	portConfig.c_cflag|=(CLOCAL | CREAD);
	portConfig.c_lflag&=(~(ICANON|ECHO|ECHOE|ECHOK|ECHONL|ISIG));
	portConfig.c_iflag&=(~(IGNBRK|BRKINT|PARMRK|ISTRIP |INLCR| IGNCR|ICRNL|IXON)); //  (~(INPCK|IGNPAR|PARMRK|ISTRIP|IXANY));
	portConfig.c_iflag&=~(ICRNL);

	portConfig.c_oflag&=(~OPOST);
	
	tcsetattr(portDesc, TCSANOW, &portConfig);

	setBaudRate(settings.baudRate);
	setDataBits(settings.dataBits);
	setFlowControl(settings.flowControl);
	setParity(settings.parity);
	setStopBits(settings.stopBits);
	setDtr();
	setRts();

	connect(&portFile, SIGNAL(readyRead()), this, SLOT(slotNotifierActivated()));

	return true;
}

开发者ID:AeroCano，项目名称:JdeRobot，代码行数:33，代码来源:q4serialport.cpp

示例7: setBaud

void
SerialPort::setSerial(int baud, int dataBits, int parity, int stopBits)
{
    setBaud(baud);
    setDataBits(dataBits);
    setParity(parity);
    setStopBits(stopBits);
}

开发者ID:cwarden，项目名称:quasar，代码行数:8，代码来源:serial_port_unix.cpp

示例8: sizeof

/*!
\fn bool Win_QextSerialPort::open(OpenMode mode)
Opens a serial port.  Note that this function does not specify which device to open.  If you need
to open a device by name, see Win_QextSerialPort::open(const char*).  This function has no effect
if the port associated with the class is already open.  The port is also configured to the current
settings, as stored in the Settings structure.
*/
bool Win_QextSerialPort::open(OpenMode mode) {
	unsigned long confSize = sizeof(COMMCONFIG);
	Win_CommConfig.dwSize = confSize;
	DWORD dwFlagsAndAttributes = 0;
	if (queryMode() == QextSerialBase::EventDriven)
		dwFlagsAndAttributes += FILE_FLAG_OVERLAPPED;

    LOCK_MUTEX();
    if (mode == QIODevice::NotOpen)
        return isOpen();
    if (!isOpen()) {
        /*open the port*/
        Win_Handle=CreateFileA(port.toLatin1(), GENERIC_READ|GENERIC_WRITE,
                              FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, OPEN_EXISTING, dwFlagsAndAttributes, NULL);
        if (Win_Handle!=INVALID_HANDLE_VALUE)
        {
            /*configure port settings*/
            GetCommConfig(Win_Handle, &Win_CommConfig, &confSize);
            GetCommState(Win_Handle, &(Win_CommConfig.dcb));

            /*set up parameters*/
            Win_CommConfig.dcb.fBinary=TRUE;
            Win_CommConfig.dcb.fInX=FALSE;
            Win_CommConfig.dcb.fOutX=FALSE;
            Win_CommConfig.dcb.fAbortOnError=FALSE;
            Win_CommConfig.dcb.fNull=FALSE;
            setBaudRate(Settings.BaudRate);
            setDataBits(Settings.DataBits);
            setStopBits(Settings.StopBits);
            setParity(Settings.Parity);
            setFlowControl(Settings.FlowControl);
            setTimeout(Settings.Timeout_Millisec);
            SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));

            //init event driven approach
			if (queryMode() == QextSerialBase::EventDriven) {
		        Win_CommTimeouts.ReadIntervalTimeout = MAXDWORD;
		        Win_CommTimeouts.ReadTotalTimeoutMultiplier = 0;
		        Win_CommTimeouts.ReadTotalTimeoutConstant = 0;
				Win_CommTimeouts.WriteTotalTimeoutMultiplier = 0;
				Win_CommTimeouts.WriteTotalTimeoutConstant = 0;
				SetCommTimeouts(Win_Handle, &Win_CommTimeouts);
            	if (!SetCommMask( Win_Handle, EV_TXEMPTY | EV_RXCHAR | EV_DSR)) {
            		qWarning("Failed to set Comm Mask. Error code: %ld", GetLastError());
					UNLOCK_MUTEX();
            		return false;
            	}
            	overlapThread->start();
            }
			QIODevice::open(mode);
        }
    } else {
		UNLOCK_MUTEX();
    	return false;
    }
    UNLOCK_MUTEX();
    return isOpen();
}

开发者ID:Magic3DPrinter，项目名称:Bservers，代码行数:65，代码来源:win_qextserialport.cpp

示例9: disable

void Serial::config(uint32_t speed, Serial::Parity parity, Serial::WordLength dataBits, Serial::StopBits stopBits, HardwareFlowControl hardwareFlow)
{
    disable(Device::Part::All);
    setSpeed(speed);
    setParity(parity);
    setWordLength(dataBits);
    setStopBits(stopBits);
    setHardwareFlowControl(hardwareFlow);
}

开发者ID:thomaswihl，项目名称:wos，代码行数:9，代码来源:Serial.cpp

示例10: setBaudRate

/*! \brief SerialDevice::stopDevice Is the serial interface's implementation of setDefaults.
 * Sets the serial devices to the default values. (Rate=9600, Parity=None, Flow=None, Data=8, Stop=1)
 */
void SerialDevice::setDefaults()
{
    statusReady = false;
    setBaudRate(9600);
    setParity(0);
    setFlowControl(0);
    setDataBits(8);
    setStopBits(1);
}

开发者ID:FIGS-FESS，项目名称:FESSGUI，代码行数:12，代码来源:serialdevice.cpp

示例11: setBaudRate

/*!
Sets the port settigns.
*/
void QextSerialPort::setPortSetting(const PortSettings& settings)
{
    setBaudRate(settings.BaudRate);
    setDataBits(settings.DataBits);
    setParity(settings.Parity);
    setStopBits(settings.StopBits);
    setFlowControl(settings.FlowControl);
    setTimeout(settings.Timeout_Millisec);
}

开发者ID:Jacob1988，项目名称:lxyppc-serial，代码行数:12，代码来源:qextserialport.cpp

示例12: setBaudRate

/*!
		\fn Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings)
			Constructs a port with default name and specified settings.
*/
Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings) {
	Win_Handle=INVALID_HANDLE_VALUE;
	setBaudRate(settings.BaudRate);
	setDataBits(settings.DataBits);
	setStopBits(settings.StopBits);
	setParity(settings.Parity);
	setFlowControl(settings.FlowControl);
	setTimeout(settings.Timeout_Sec, settings.Timeout_Millisec);
}

开发者ID:fcrohas，项目名称:QIcomPCR，代码行数:13，代码来源:win_qextserialport.cpp

示例13: lock

/*!
Opens the serial port associated to this class.
This function has no effect if the port associated with the class is already open.
The port is also configured to the current settings, as stored in the Settings structure.
*/
bool QextSerialPort::open(OpenMode mode)
{
    QMutexLocker lock(mutex);
    if (mode == QIODevice::NotOpen)
        return isOpen();
    if (!isOpen()) {
        qDebug() << "trying to open file" << port.toAscii();
        //note: linux 2.6.21 seems to ignore O_NDELAY flag
        if ((fd = ::open(port.toAscii() ,O_RDWR | O_NOCTTY | O_NDELAY)) != -1) {
            qDebug("file opened succesfully");

            setOpenMode(mode);              // Flag the port as opened
            tcgetattr(fd, &old_termios);    // Save the old termios
            Posix_CommConfig = old_termios; // Make a working copy


            /* the equivelent of cfmakeraw() to enable raw access */
#ifdef HAVE_CFMAKERAW
            cfmakeraw(&Posix_CommConfig);   // Enable raw access
#else
            Posix_CommConfig.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP
                                    | INLCR | IGNCR | ICRNL | IXON);
            Posix_CommConfig.c_oflag &= ~OPOST;
            Posix_CommConfig.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
            Posix_CommConfig.c_cflag &= ~(CSIZE | PARENB);
            Posix_CommConfig.c_cflag |= CS8;
#endif

            /*set up other port settings*/
            Posix_CommConfig.c_cflag|=CREAD|CLOCAL;
            Posix_CommConfig.c_lflag&=(~(ICANON|ECHO|ECHOE|ECHOK|ECHONL|ISIG));
            Posix_CommConfig.c_iflag&=(~(INPCK|IGNPAR|PARMRK|ISTRIP|ICRNL|IXANY));
            Posix_CommConfig.c_oflag&=(~OPOST);
            Posix_CommConfig.c_cc[VMIN]= 0;
#ifdef _POSIX_VDISABLE  // Is a disable character available on this system?
            // Some systems allow for per-device disable-characters, so get the
            //  proper value for the configured device
            const long vdisable = fpathconf(fd, _PC_VDISABLE);
            Posix_CommConfig.c_cc[VINTR] = vdisable;
            Posix_CommConfig.c_cc[VQUIT] = vdisable;
            Posix_CommConfig.c_cc[VSTART] = vdisable;
            Posix_CommConfig.c_cc[VSTOP] = vdisable;
            Posix_CommConfig.c_cc[VSUSP] = vdisable;
#endif //_POSIX_VDISABLE
            setBaudRate(Settings.BaudRate);
            setDataBits(Settings.DataBits);
            setParity(Settings.Parity);
            setStopBits(Settings.StopBits);
            setFlowControl(Settings.FlowControl);
            setTimeout(Settings.Timeout_Millisec);
            tcsetattr(fd, TCSAFLUSH, &Posix_CommConfig);

            if (queryMode() == QextSerialPort::EventDriven) {
                readNotifier = new QSocketNotifier(fd, QSocketNotifier::Read, this);
                connect(readNotifier, SIGNAL(activated(int)), this, SIGNAL(readyRead()));
            }

开发者ID:MChemodanov，项目名称:marble，代码行数:61，代码来源:posix_qextserialport.cpp

示例14: sizeof

/*!
Opens a serial port.  Note that this function does not specify which device to open.  If you need
to open a device by name, see QextSerialPort::open(const char*).  This function has no effect
if the port associated with the class is already open.  The port is also configured to the current
settings, as stored in the Settings structure.
*/
bool QextSerialPort::open(OpenMode mode) {
    unsigned long confSize = sizeof(COMMCONFIG);
    Win_CommConfig.dwSize = confSize;
    DWORD dwFlagsAndAttributes = 0;
    if (queryMode() == QextSerialPort::EventDriven)
        dwFlagsAndAttributes += FILE_FLAG_OVERLAPPED;

    QMutexLocker lock(mutex);
    if (mode == QIODevice::NotOpen)
        return isOpen();
    if (!isOpen()) {
        /*open the port*/
        Win_Handle=CreateFileA(port.toAscii(), GENERIC_READ|GENERIC_WRITE,
                              0, NULL, OPEN_EXISTING, dwFlagsAndAttributes, NULL);
        if (Win_Handle!=INVALID_HANDLE_VALUE) {
            QIODevice::open(mode);
            /*configure port settings*/
            GetCommConfig(Win_Handle, &Win_CommConfig, &confSize);
            GetCommState(Win_Handle, &(Win_CommConfig.dcb));

            /*set up parameters*/
            Win_CommConfig.dcb.fBinary=TRUE;
            Win_CommConfig.dcb.fInX=FALSE;
            Win_CommConfig.dcb.fOutX=FALSE;
            Win_CommConfig.dcb.fAbortOnError=FALSE;
            Win_CommConfig.dcb.fNull=FALSE;
            setBaudRate(Settings.BaudRate);
            setDataBits(Settings.DataBits);
            setStopBits(Settings.StopBits);
            setParity(Settings.Parity);
            setFlowControl(Settings.FlowControl);
            setTimeout(Settings.Timeout_Millisec);
            SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));

            //init event driven approach
            if (queryMode() == QextSerialPort::EventDriven) {
                Win_CommTimeouts.ReadIntervalTimeout = MAXDWORD;
                Win_CommTimeouts.ReadTotalTimeoutMultiplier = 0;
                Win_CommTimeouts.ReadTotalTimeoutConstant = 0;
                Win_CommTimeouts.WriteTotalTimeoutMultiplier = 0;
                Win_CommTimeouts.WriteTotalTimeoutConstant = 0;
                SetCommTimeouts(Win_Handle, &Win_CommTimeouts);
                if (!SetCommMask( Win_Handle, EV_TXEMPTY | EV_RXCHAR | EV_DSR)) {
                    qWarning() << "failed to set Comm Mask. Error code:", GetLastError();
                    return false;
                }
                winEventNotifier = new QWinEventNotifier(overlap.hEvent, this);
                connect(winEventNotifier, SIGNAL(activated(HANDLE)), this, SLOT(onWinEvent(HANDLE)));
                WaitCommEvent(Win_Handle, &eventMask, &overlap);
            }
        }
    } else {
        return false;
    }
    return isOpen();
}

开发者ID:M-Elfeki，项目名称:Auto_Pilot，代码行数:62，代码来源:win_qextserialport.cpp

示例15: construct

/*!
\fn Posix_QextSerialPort::Posix_QextSerialPort(const char* name, const PortSettings& settings)
Constructs a port with specified name and settings.
*/
Posix_QextSerialPort::Posix_QextSerialPort(const char* name, const PortSettings& settings)
                     :QextSerialBase(name) {
    construct();
    setBaudRate(settings.BaudRate);
    setDataBits(settings.DataBits);
    setStopBits(settings.StopBits);
    setParity(settings.Parity);
    setFlowControl(settings.FlowControl);
    setTimeout(settings.Timeout_Sec, settings.Timeout_Millisec);
}

开发者ID:BackupTheBerlios，项目名称:poa，代码行数:14，代码来源:posix_qextserialport.cpp

示例16: Setting

NetworkManager::SerialSetting::SerialSetting(const Ptr &other):
    Setting(other),
    d_ptr(new SerialSettingPrivate())
{
    setBaud(other->baud());
    setBits(other->bits());
    setParity(other->parity());
    setStopbits(other->stopbits());
    setSendDelay(other->sendDelay());
}

开发者ID:Bridges，项目名称:libnm-qt5，代码行数:10，代码来源:serialsetting.cpp

示例17: setPortName

/*!
 * \brief SerialDev::configPort - Parametri per configurare la porta seriale
 * \return true se riesce a configurare correttamente la porta seriale
 */
bool SerialDev::configPort (const QString &name)
{
    bool debugVal = m_debug;
    m_debug = true;
    setPortName(name);

    if (!open(QIODevice::ReadWrite)) {
        QString testo = QString("Can't open %1, error code %2")
                    .arg(portName()).arg(error());
        debug(testo);
        return false;
    }

    if (!setBaudRate(QSerialPort::Baud115200)) {
        QString testo = QString("Can't set rate 115200 baud to port %1, error code %2")
                     .arg(portName()).arg(error());
        debug(testo);
        return false;
    }

    if (!setDataBits(QSerialPort::Data8)) {
        QString testo = QString("Can't set 8 data bits to port %1, error code %2")
                     .arg(portName()).arg(error());
        debug(testo);
        return false;
    }

    if (!setParity(QSerialPort::NoParity)) {
        QString testo = QString("Can't set no patity to port %1, error code %2")
                     .arg(portName()).arg(error());
        debug(testo);
        return false;
    }

    if (!setStopBits(QSerialPort::OneStop)) {
        QString testo = QString("Can't set 1 stop bit to port %1, error code %2")
                     .arg(portName()).arg(error());
        debug(testo);
        return false;
    }

    if (!setFlowControl(QSerialPort::NoFlowControl)) {
        QString testo = QString("Can't set no flow control to port %1, error code %2")
                     .arg(portName()).arg(error());
        debug(testo);
        return false;
    }

    connect(this, SIGNAL(error(QSerialPort::SerialPortError)),
            this, SLOT(errorSlot(QSerialPort::SerialPortError)));
    connect(this, SIGNAL(readyRead()), this, SLOT(fromDeviceSlot()));

    m_debug = debugVal;
   return true;
}

开发者ID:specialk74，项目名称:Lexus，代码行数:59，代码来源:serialdev.cpp

示例18: LOCK_MUTEX

/*!
\fn bool Posix_QextSerialPort::open(OpenMode mode)
Opens the serial port associated to this class.
This function has no effect if the port associated with the class is already open.
The port is also configured to the current settings, as stored in the Settings structure.
*/
bool Posix_QextSerialPort::open(OpenMode mode)
{
    LOCK_MUTEX();
    if (mode == QIODevice::NotOpen)
    {
        UNLOCK_MUTEX();
        return isOpen();
    }

    if (!isOpen())
    {
        /*open the port*/
        Posix_File->setFileName(port);
        QueueReceiveSignals = 10;
        if (Posix_File->open(QIODevice::ReadWrite | QIODevice::Unbuffered))
        {
            /*set open mode*/
            QIODevice::open(mode);

            /*configure port settings*/
            tcgetattr(Posix_File->handle(), &Posix_CommConfig);

            /*set up other port settings*/
            Posix_CommConfig.c_cflag|=CREAD|CLOCAL;
            Posix_CommConfig.c_lflag&=(~(ICANON|ECHO|ECHOE|ECHOK|ECHONL|ISIG));
            Posix_CommConfig.c_iflag&=(~(INPCK|IGNPAR|IGNBRK|PARMRK|ISTRIP|ICRNL|IXANY));
            Posix_CommConfig.c_oflag&=(~OPOST);
            Posix_CommConfig.c_cc[VMIN]=0;
            Posix_CommConfig.c_cc[VINTR] = _POSIX_VDISABLE;
            Posix_CommConfig.c_cc[VQUIT] = _POSIX_VDISABLE;
            Posix_CommConfig.c_cc[VSTART] = _POSIX_VDISABLE;
            Posix_CommConfig.c_cc[VSTOP] = _POSIX_VDISABLE;
            Posix_CommConfig.c_cc[VSUSP] = _POSIX_VDISABLE;
            setBaudRate(Settings.BaudRate);
            setDataBits(Settings.DataBits);
            setParity(Settings.Parity);
            setStopBits(Settings.StopBits);
            setFlowControl(Settings.FlowControl);
            //setTimeout(Settings.Timeout_Sec, Settings.Timeout_Millisec);
            setTimeout(Settings.Timeout_Millisec);
            tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);

            handle = Posix_File->handle();
            readerThread->handle = handle;
            readerThread->shutdown = false;
            readerThread->start();
        }
        else
        {
            qDebug("Could not open File! Error code : %d", Posix_File->error());
        }
    }
    UNLOCK_MUTEX();
    return isOpen();
}

开发者ID:bcabebe，项目名称:Serial-Bootloader-AN1310-v1.05，代码行数:61，代码来源:posix_qextserialport.cpp

示例19: initialize

			/*
			 * Initialize Uart HAL Peripheral
			 *
			 * Enables clocks, the UART peripheral (but neither TX nor RX)
			 * Sets baudrate and parity.
			 */
			static void
			initialize(uint32_t baudrate, Parity parity = Parity::Disabled)
			{
				enable();
				// DIRTY HACK: disable and reenable uart to be able to set
				//             baud rate as well as parity
				USART2->CR1 &= ~USART_CR1_UE;	// Uart Disable
				setBaudrate(baudrate);
				setParity(parity);
				USART2->CR1 |=  USART_CR1_UE;	// Uart Reenable
			}

开发者ID:Alex0704t，项目名称:xpcc，代码行数:17，代码来源:usart_hal_2.hpp

示例20: setBaudRate

/*!
\fn Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings)
Constructs a port with default name and specified settings.
*/
Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings, QextSerialBase::QueryMode mode) {
    Win_Handle=INVALID_HANDLE_VALUE;
    setBaudRate(settings.BaudRate);
    setDataBits(settings.DataBits);
    setStopBits(settings.StopBits);
    setParity(settings.Parity);
    setFlowControl(settings.FlowControl);
    setTimeout(settings.Timeout_Millisec);
    setQueryMode(mode);
    init();
}

开发者ID:Anne081031，项目名称:ParkCode，代码行数:15，代码来源:win_qextserialport.cpp

注：本文中的setParity函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ setPen函数代码示例发布时间：2022-05-30

C++ setParentPresenceVector函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19152|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9978|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8319|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8689|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8630|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9646|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8614|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7993|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8644|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7529|2022-11-06

客服电话

电子邮件

C++ setParity函数代码示例

示例1: setBaud

示例2: switch

示例3: m_fd

示例4: openTouchDev

示例5: LOCK_MUTEX

示例6: tcgetattr

示例7: setBaud

示例8: sizeof

示例9: disable

示例10: setBaudRate

示例11: setBaudRate

示例12: setBaudRate

示例13: lock

示例14: sizeof

示例15: construct

示例16: Setting

示例17: setPortName

示例18: LOCK_MUTEX

示例19: initialize

示例20: setBaudRate

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-35373

krishnaik06/Machine-Learning-in-90-days

treesouth/AndroidLibrary: A list of awes

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053