C++ setEncryptionStatus函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中setEncryptionStatus函数的典型用法代码示例。如果您正苦于以下问题：C++ setEncryptionStatus函数的具体用法？C++ setEncryptionStatus怎么用？C++ setEncryptionStatus使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了setEncryptionStatus函数的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: connect

void BitcoinGUI::setWalletModel(WalletModel *walletModel)
{
    this->walletModel = walletModel;
    if(walletModel)
    {
        // Report errors from wallet thread
        connect(walletModel, SIGNAL(error(QString,QString,bool)), this, SLOT(error(QString,QString,bool)));

        // Put transaction list in tabs
        transactionView->setModel(walletModel);

        overviewPage->setModel(walletModel, clientModel);
        addressBookPage->setModel(walletModel->getAddressTableModel());
        receiveCoinsPage->setModel(walletModel->getAddressTableModel());
        sendCoinsPage->setModel(walletModel);
        signVerifyMessageDialog->setModel(walletModel);

        setEncryptionStatus(walletModel->getEncryptionStatus());
        connect(walletModel, SIGNAL(encryptionStatusChanged(int)), this, SLOT(setEncryptionStatus(int)));

        // Balloon pop-up for new transaction
        connect(walletModel->getTransactionTableModel(), SIGNAL(rowsInserted(QModelIndex,int,int)),
                this, SLOT(incomingTransaction(QModelIndex,int,int)));

        // Ask for passphrase if needed
        connect(walletModel, SIGNAL(requireUnlock()), this, SLOT(unlockWallet()));
    }
}

开发者ID:CryptoCoin，项目名称:bitstar，代码行数:28，代码来源:bitcoingui.cpp

示例2: connect

void WalletView::setWalletModel(WalletModel *walletModel)
{
    this->walletModel = walletModel;
    if (walletModel)
    {
        // Receive and report messages from wallet thread
        connect(walletModel, SIGNAL(message(QString,QString,unsigned int)), gui, SLOT(message(QString,QString,unsigned int)));

        // Put transaction list in tabs
        transactionView->setModel(walletModel);
        overviewPage->setWalletModel(walletModel);
        addressBookPage->setModel(walletModel->getAddressTableModel());
        receiveCoinsPage->setModel(walletModel->getAddressTableModel());
        sendCoinsPage->setModel(walletModel);
        voteCoinsPage->setModel(walletModel);

        signVerifyMessageDialog->setModel(walletModel);

        setEncryptionStatus();
        connect(walletModel, SIGNAL(encryptionStatusChanged(int)), gui, SLOT(setEncryptionStatus(int)));

        // Balloon pop-up for new transaction
        connect(walletModel->getTransactionTableModel(), SIGNAL(rowsInserted(QModelIndex,int,int)),
                this, SLOT(incomingTransaction(QModelIndex,int,int)));

        // Ask for passphrase if needed
        connect(walletModel, SIGNAL(requireUnlock()), this, SLOT(unlockWallet()));
        this->gui->setWindowTitle(tr("BunnyCoin") + " - " + tr("Wallet"));// + " - " + walletModel->getDefaultWalletAddress().c_str());
    }
}

开发者ID:bunnycoin，项目名称:bunnycoin，代码行数:30，代码来源:walletview.cpp

示例3: connect

void WalletView::setWalletModel(WalletModel *walletModel)
{
    this->walletModel = walletModel;
    if(walletModel)
    {
        // Receive and report messages from wallet thread
        connect(walletModel, SIGNAL(message(QString,QString,unsigned int)), gui, SLOT(message(QString,QString,unsigned int)));

        // Put transaction list in tabs
        transactionView->setModel(walletModel);
        overviewPage->setWalletModel(walletModel);
        addressBookPage->setModel(walletModel->getAddressTableModel());
        receiveCoinsPage->setModel(walletModel->getAddressTableModel());
        sendCoinsPage->setModel(walletModel);
        signVerifyMessageDialog->setModel(walletModel);
        stakeForCharityDialog->setModel(walletModel);

        setEncryptionStatus();
        connect(walletModel, SIGNAL(encryptionStatusChanged(int)), gui, SLOT(setEncryptionStatus(int)));

        // Balloon pop-up for new transaction
        connect(walletModel->getTransactionTableModel(), SIGNAL(rowsInserted(QModelIndex,int,int)),
                this, SLOT(incomingTransaction(QModelIndex,int,int)));

        // Ask for passphrase if needed
        connect(walletModel, SIGNAL(requireUnlock()), this, SLOT(unlockWallet()));

        // Set Total Balance for all loaded wallets.
        overviewPage->setTotBalance(walletModel->getTotBalance());
        connect(walletModel, SIGNAL(totBalanceChanged(qint64)), this, SLOT(setTotBalance()));
    }
}

开发者ID:Tranz5，项目名称:HoboNickels，代码行数:32，代码来源:walletview.cpp

示例4: connect

void EclipseGUI::setWalletModel(WalletModel *walletModel)
{
    this->walletModel = walletModel;
    if(walletModel)
    {
        // Report errors from wallet thread
        connect(walletModel, SIGNAL(error(QString,QString,bool)), this, SLOT(error(QString,QString,bool)));

        documentFrame->addToJavaScriptWindowObject("walletModel",  walletModel);
        documentFrame->addToJavaScriptWindowObject("optionsModel", walletModel->getOptionsModel());

        documentFrame->evaluateJavaScript("connectSignals();");

        walletModel->getOptionsModel()->displayUnitChanged   (walletModel->getOptionsModel()->getDisplayUnit());
        walletModel->getOptionsModel()->reserveBalanceChanged(walletModel->getOptionsModel()->getReserveBalance());
        walletModel->getOptionsModel()->rowsPerPageChanged   (walletModel->getOptionsModel()->getRowsPerPage());

        // Keep up to date with client
        setNumConnections(clientModel->getNumConnections());
        setNumBlocks     (clientModel->getNumBlocks(),
                          clientModel->getNumBlocksOfPeers());
        setEncryptionStatus(walletModel->getEncryptionStatus());
        walletModel->encryptionStatusChanged(walletModel->getEncryptionStatus());

        connect(walletModel, SIGNAL(encryptionStatusChanged(int)), SLOT(setEncryptionStatus(int)));

        // Balloon pop-up for new transaction
        connect(walletModel->getTransactionTableModel(), SIGNAL(rowsInserted(QModelIndex,int,int)),    SLOT(incomingTransaction(QModelIndex,int,int)));

        // Ask for passphrase if needed
        connect(walletModel, SIGNAL(requireUnlock()), this, SLOT(unlockWallet()));

        bridge->setWalletModel();
    }
}

开发者ID:EclipseCrypto，项目名称:eclipse，代码行数:35，代码来源:bitcoingui.cpp

示例5: dlg

void WalletView::encryptWallet(bool status)
{
    if(!walletModel)
        return;
    AskPassphraseDialog dlg(status ? AskPassphraseDialog::Encrypt : AskPassphraseDialog::Decrypt, this);
    dlg.setModel(walletModel);
    dlg.exec();

    setEncryptionStatus();
}

开发者ID:Mario241077，项目名称:NoirShares-1，代码行数:10，代码来源:walletview.cpp

注：本文中的setEncryptionStatus函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。