本文整理汇总了C++中setBounds函数的典型用法代码示例。如果您正苦于以下问题：C++ setBounds函数的具体用法？C++ setBounds怎么用？C++ setBounds使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了setBounds函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: GClock
GClock(){
setBounds((800 - 212) / 2, (600 - 50) / 2, 212, 50);
setTitle("とけい");
refreshDate();
label = new Label(time, Label::CENTER);
label->setBounds(0, 4, 200, 16);
add(label);
setTimer(1000);
}
开发者ID:ShotaroTsuji，项目名称:mona，代码行数:9，代码来源:gclock.cpp
示例2: getNDim
double RateGammaInvar::optimizeParameters(double gradient_epsilon) {
int ndim = getNDim();
// return if nothing to be optimized
if (ndim == 0)
return phylo_tree->computeLikelihood();
if (verbose_mode >= VB_MED)
cout << "Optimizing " << name << " model parameters by " << optimize_alg << " algorithm..." << endl;
if (optimize_alg.find("EM_RR") != string::npos) {
return randomRestartOptimization(gradient_epsilon);
} else if (optimize_alg.find("Brent") != string::npos || phylo_tree->aln->frac_const_sites == 0.0 || isFixPInvar() || isFixGammaShape()) {
double lh = phylo_tree->computeLikelihood();
cur_optimize = 0;
double gamma_lh = RateGamma::optimizeParameters(gradient_epsilon);
ASSERT(gamma_lh >= lh-0.1);
cur_optimize = 1;
double invar_lh = -DBL_MAX;
invar_lh = RateInvar::optimizeParameters(gradient_epsilon);
ASSERT(invar_lh >= gamma_lh-0.1);
cur_optimize = 0;
return invar_lh;
} else if (optimize_alg.find("EM") != string::npos) {
return optimizeWithEM(gradient_epsilon);
} else if (optimize_alg.find("BFGS") != string::npos) {
//if (freq_type == FREQ_ESTIMATE) scaleStateFreq(false);
double *variables = new double[ndim+1];
double *upper_bound = new double[ndim+1];
double *lower_bound = new double[ndim+1];
bool *bound_check = new bool[ndim+1];
double score;
// by BFGS algorithm
setVariables(variables);
setBounds(lower_bound, upper_bound, bound_check);
score = -minimizeMultiDimen(variables, ndim, lower_bound, upper_bound, bound_check, max(gradient_epsilon, TOL_GAMMA_SHAPE));
getVariables(variables);
phylo_tree->clearAllPartialLH();
score = phylo_tree->computeLikelihood();
delete [] bound_check;
delete [] lower_bound;
delete [] upper_bound;
delete [] variables;
return score;
} else {
string errMsg = "Unknown optimization algorithm: " + optimize_alg;
outError(errMsg.c_str());
return 0.0;
}
}
开发者ID:bqminh，项目名称:IQ-TREE，代码行数:57，代码来源:rategammainvar.cpp
示例3: setBounds
void QIntConfigurableTileWidget::reloadConfigurableData() {
stopSignaling = true;
setBounds();
int value = config->getParam(key);
spBox.setValue(value);
slider.setValue(value);
stopSignaling = false;
updatePaletteChanged();
}
开发者ID:CentreForBioRobotics，项目名称:lpzrobots，代码行数:9，代码来源:QIntConfigurableTileWidget.cpp
示例4: Drawable
DrawableImage::DrawableImage (const DrawableImage& other)
: Drawable (other),
image (other.image),
opacity (other.opacity),
overlayColour (other.overlayColour),
bounds (other.bounds)
{
setBounds (other.getBounds());
}
开发者ID:COx2，项目名称:PizzaKnobFilter，代码行数:9，代码来源:juce_DrawableImage.cpp
示例5: qt_static_metacall
int ONVIF::VideoSourceConfiguration::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
{
_id = QObject::qt_metacall(_c, _id, _a);
if (_id < 0)
return _id;
if (_c == QMetaObject::InvokeMetaMethod) {
if (_id < 5)
qt_static_metacall(this, _c, _id, _a);
_id -= 5;
} else if (_c == QMetaObject::RegisterMethodArgumentMetaType) {
if (_id < 5)
*reinterpret_cast<int*>(_a[0]) = -1;
_id -= 5;
}
#ifndef QT_NO_PROPERTIES
else if (_c == QMetaObject::ReadProperty) {
void *_v = _a[0];
switch (_id) {
case 0: *reinterpret_cast< QString*>(_v) = token(); break;
case 1: *reinterpret_cast< QString*>(_v) = name(); break;
case 2: *reinterpret_cast< int*>(_v) = useCount(); break;
case 3: *reinterpret_cast< QString*>(_v) = sourceToken(); break;
case 4: *reinterpret_cast< QRect*>(_v) = bounds(); break;
default: break;
}
_id -= 5;
} else if (_c == QMetaObject::WriteProperty) {
void *_v = _a[0];
switch (_id) {
case 0: setToken(*reinterpret_cast< QString*>(_v)); break;
case 1: setName(*reinterpret_cast< QString*>(_v)); break;
case 2: setUseCount(*reinterpret_cast< int*>(_v)); break;
case 3: setSourceToken(*reinterpret_cast< QString*>(_v)); break;
case 4: setBounds(*reinterpret_cast< QRect*>(_v)); break;
default: break;
}
_id -= 5;
} else if (_c == QMetaObject::ResetProperty) {
_id -= 5;
} else if (_c == QMetaObject::QueryPropertyDesignable) {
_id -= 5;
} else if (_c == QMetaObject::QueryPropertyScriptable) {
_id -= 5;
} else if (_c == QMetaObject::QueryPropertyStored) {
_id -= 5;
} else if (_c == QMetaObject::QueryPropertyEditable) {
_id -= 5;
} else if (_c == QMetaObject::QueryPropertyUser) {
_id -= 5;
} else if (_c == QMetaObject::RegisterPropertyMetaType) {
if (_id < 5)
*reinterpret_cast<int*>(_a[0]) = -1;
_id -= 5;
}
#endif // QT_NO_PROPERTIES
return _id;
}
开发者ID:FatCat1411，项目名称:opencvr，代码行数:57，代码来源:moc_videosourceconfiguration.cpp
示例6: setOpaque
void pspRoomConfigGUI::setup(){
setOpaque(true);
setBounds(0, 0, 100, 100);
addAndMakeVisible(panel);
createWidgets();
}
开发者ID:avperrotta，项目名称:psPlayground，代码行数:9，代码来源:pspRoomConfigGUI.cpp
示例7: getPlot3d
static int getPlot3d(int iAxeUID, scicos_block * block)
{
int iPlot3d;
sco_data *sco = (sco_data *) * (block->work);
// assert the sco is not NULL
if (sco == NULL)
{
return 0;
}
// fast path for an existing object
if (sco->scope.cachedPlot3dUID)
{
return sco->scope.cachedPlot3dUID;
}
iPlot3d = findChildWithKindAt(iAxeUID, __GO_PLOT3D__, 0);
/*
* Allocate if necessary
*/
if (iPlot3d == 0)
{
iPlot3d = createGraphicObject(__GO_PLOT3D__);
if (iPlot3d != 0)
{
createDataObject(iPlot3d, __GO_PLOT3D__);
setGraphicObjectRelationship(iAxeUID, iPlot3d);
}
else
{
return 0;
}
}
/*
* Setup on first access
*/
setBounds(block, iAxeUID, iPlot3d);
setPlot3dSettings(iPlot3d);
setDefaultValues(block, iPlot3d);
{
int iClipState = 1; //on
setGraphicObjectProperty(iPlot3d, __GO_CLIP_STATE__, &iClipState, jni_int, 1);
}
/*
* then cache with a local storage
*/
sco->scope.cachedPlot3dUID = iPlot3d;
return sco->scope.cachedPlot3dUID;
}
开发者ID:FOSSEE-Internship，项目名称:scilab，代码行数:56，代码来源:cmat3d.c
示例8: vertexCount
Mesh::Mesh(const DFFGeometry& geometry, bool autoSubmeshes)
: vertexCount(geometry.getVertexCount()), frame(NULL)
{
flags = 0;
const float* vertices = geometry.getVertices();
const float* normals = geometry.getNormals();
const uint8_t* colors = geometry.getVertexColors();
const float* texCoords = NULL;
const uint8_t* boneIndices = geometry.getBoneIndices();
const float* boneWeights = geometry.getBoneWeights();
if (geometry.getUVSetCount() > 0) {
texCoords = geometry.getUVCoordSet(0);
}
if (geometry.isTriangleStripFormat()) {
vertexFormat = VertexFormatTriangleStrips;
} else {
vertexFormat = VertexFormatTriangles;
}
if (normals) {
flags |= MeshNormals;
}
if (texCoords) {
flags |= MeshTexCoords;
}
if (colors) {
flags |= MeshVertexColors;
}
if (boneIndices) {
flags |= MeshSkinData;
}
if (geometry.isDynamicLightingEnabled()) {
flags |= MeshDynamicLighting;
}
DFFGeometry::ConstMaterialIterator it;
for (it = geometry.getMaterialBegin() ; it != geometry.getMaterialEnd() ; it++) {
Material* material = new Material(**it);
addMaterial(material);
}
if (autoSubmeshes) {
DFFGeometry::ConstPartIterator pit;
for (pit = geometry.getPartBegin() ; pit != geometry.getPartEnd() ; pit++) {
Submesh* submesh = new Submesh(this, **pit);
}
}
const DFFBoundingSphere* b = geometry.getBounds();
setBounds(b->x, b->y, b->z, b->radius);
init(flags, vertices, normals, texCoords, colors, boneIndices, boneWeights);
}
开发者ID:alemariusnexus，项目名称:gtatools，代码行数:56，代码来源:Mesh.cpp
示例9: disposeAllCallBacks
void Movie::releaseMovie() {
if (_video) {
delete _video;
_video = 0;
disposeAllCallBacks();
deallocateSurface();
}
setBounds(Common::Rect(0, 0, 0, 0));
}
开发者ID:AlbanBedel，项目名称:scummvm，代码行数:10，代码来源:movie.cpp
示例10: getLevel
void GraphNode::updateBoundaries()
{
int level = getLevel();
int horzShift = gv->getHorizontalShift(this);
setBounds(20+horzShift*140, 20+getLevel()*40, 150, 50);
}
开发者ID:AGenews，项目名称:GUI，代码行数:10，代码来源:GraphViewer.cpp
示例11: setRadius
CylinderMesh::CylinderMesh (Box &_bounds, float _radius, float _complexity)
{
setRadius (_radius) ;
setBounds (_bounds) ;
setCenter (_bounds.min.midpoint(_bounds.max)) ;
complexity = _complexity ;
construct() ;
}
开发者ID:parhelia512，项目名称:tge-152-fork，代码行数:10，代码来源:DTSBrushMesh.cpp
示例12: init
void Symm1D::
init()
{
_init(1);
setBounds(0, -1.0, 1.0);
// set tolerances
setSteadyTolerances(1e-4, 1e-4);
setTransientTolerances(1e-4, 1e-4);
}
开发者ID:anujg1991，项目名称:cantera，代码行数:10，代码来源:boundaries1D.cpp
示例13: setCoordinates
void Button::setParams(int x, int y, int w, int h, bool& f, const string& file)
{
if (bounds == NULL)
bounds = new SDL_Rect;
setCoordinates(x,y);
setBounds(w,h);
setFlag(f);
setSource(file);
}
开发者ID:j4qfrost，项目名称:Pyman，代码行数:10，代码来源:Button.cpp
示例14: add_control
bool ReaScriptWindow::addControlFromName(std::string cname, std::string objectname)
{
if (cname == "Button")
{
auto c = std::make_shared<WinButton>(this, objectname);
c->setObjectName(objectname);
c->GenericNotifyCallback = [this, objectname](GenericNotifications)
{
m_dirty_controls.insert(objectname);
};
c->setBounds({ 5, 5, 50, 25 });
add_control(c);
return true;
}
else if (cname == "Slider")
{
auto c = std::make_shared<ReaSlider>(this);
c->setObjectName(objectname);
c->SliderValueCallback = [this, objectname](GenericNotifications, double)
{
m_dirty_controls.insert(objectname);
};
c->setBounds({ 5, 5, 50, 25 });
add_control(c);
return true;
}
else
{
auto c = create_licecontrol(this, cname);
if (c != nullptr)
{
c->setObjectName(objectname);
c->GenericNotifyCallback = [this, objectname](GenericNotifications)
{
m_dirty_controls.insert(objectname);
};
c->setBounds({ 5, 5, 50, 25 });
add_control(c);
return true;
}
}
return false;
}
开发者ID:elanhickler，项目名称:mrp1，代码行数:43，代码来源:reascriptgui.cpp
示例15: b
void PHScrollerView::setFrame(const PHRect &frame)
{
PHPoint b(_bounds.width, _bounds.height);
PHView::setFrame(frame);
setBounds(bounds()/scl);
if (content)
{
PHPoint c(_bounds.width, _bounds.height);
content->setPosition((c-b)/2+content->position());
}
}
开发者ID:dapetcu21，项目名称:Porkholt，代码行数:11，代码来源:PHScrollerView.cpp
示例16: glViewport
void Render::resizeGL(const int nWidth, const int nHeight) {
int width = nWidth;
int height = nHeight? nHeight: 1;
glViewport(0, 0, width, height);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
float aspectRatio = (float)width/height;
if (width <= height) {
setBounds(-viewRadius, viewRadius, -viewRadius/aspectRatio,
viewRadius/aspectRatio);
} else {
setBounds(-viewRadius*aspectRatio, viewRadius*aspectRatio,
-viewRadius, viewRadius);
}
glOrtho(getLeftBound(), getRightBound(), getBottomBound(), getTopBound(),
1.0, -1.0);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
updateGraph();
}
开发者ID:vovanmozg，项目名称:carbox2d，代码行数:20，代码来源:render.cpp
示例17: setBounds
void MVScrollBar::moveTo(int x,int y)
/****************************************************************************
*
* Function: MVScrollBar::moveTo
* Parameters: x,y - Position to move the scroll bar to
*
****************************************************************************/
{
MVView::moveTo(x,y);
setBounds(bounds);
}
开发者ID:OS2World，项目名称:LIB-VIDEO-MGL，代码行数:11，代码来源:mscrollb.cpp
示例18: setBounds
void ComponentLayoutEditor::bindWithTarget ()
{
if (target != NULL)
{
Component* t = (Component*) target.getComponent ();
Component* p = t->getParentComponent ();
p->addAndMakeVisible (this);
setBounds (t->getBounds ());
updateFrames ();
}
}
开发者ID:rorywalsh，项目名称:cabbage，代码行数:11，代码来源:ComponentLayoutEditor.cpp
示例19: setBounds
void Drawable::setBoundsToEnclose (Rectangle<float> area)
{
Point<int> parentOrigin;
if (auto* parent = getParent())
parentOrigin = parent->originRelativeToComponent;
auto newBounds = area.getSmallestIntegerContainer() + parentOrigin;
originRelativeToComponent = parentOrigin - newBounds.getPosition();
setBounds (newBounds);
}
开发者ID:Neknail，项目名称:JUCE，代码行数:11，代码来源:juce_Drawable.cpp
示例20: getParent
void Drawable::setBoundsToEnclose (const Rectangle<float>& area)
{
Drawable* const parent = getParent();
Point<int> parentOrigin;
if (parent != 0)
parentOrigin = parent->originRelativeToComponent;
const Rectangle<int> newBounds (area.getSmallestIntegerContainer() + parentOrigin);
originRelativeToComponent = parentOrigin - newBounds.getPosition();
setBounds (newBounds);
}
开发者ID:Labmind，项目名称:GUI，代码行数:11，代码来源:juce_Drawable.cpp
注：本文中的setBounds函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论