C++ setBalance函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中setBalance函数的典型用法代码示例。如果您正苦于以下问题：C++ setBalance函数的具体用法？C++ setBalance怎么用？C++ setBalance使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了setBalance函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: tr

void SendCoinsDialog::setModel(WalletModel *model)
{
    this->model = model;

    for(int i = 0; i < ui->entries->count(); ++i)
    {
        SendCoinsEntry *entry = qobject_cast<SendCoinsEntry*>(ui->entries->itemAt(i)->widget());
		        CBitcoinAddress address = entry->getValue().address.toStdString(); 
				if(!model->isMine(address) && ui->splitBlockCheckBox->checkState() == Qt::Checked) 
		{
					model->setSplitBlock(false); //don't allow the blocks to split if sending to an outside address
			ui->splitBlockCheckBox->setCheckState(Qt::Unchecked); 
			QMessageBox::warning(this, tr("Send Coins"), 
				tr("The split block tool does not work when sending to outside addresses. Try again."), 
				QMessageBox::Ok, QMessageBox::Ok); 
			return; 
		}		
        if(entry)
        {
            entry->setModel(model);
        }
    }
    if(model && model->getOptionsModel())
    {
        setBalance(model->getBalance(), model->getStake(), model->getUnconfirmedBalance(), model->getImmatureBalance());
        connect(model, SIGNAL(balanceChanged(qint64, qint64, qint64, qint64)), this, SLOT(setBalance(qint64, qint64, qint64, qint64)));
        connect(model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(updateDisplayUnit()));

        // Coin Control
        connect(model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(coinControlUpdateLabels()));
        connect(model->getOptionsModel(), SIGNAL(coinControlFeaturesChanged(bool)), this, SLOT(coinControlFeatureChanged(bool)));
        connect(model->getOptionsModel(), SIGNAL(transactionFeeChanged(qint64)), this, SLOT(coinControlUpdateLabels()));
        ui->frameCoinControl->setVisible(model->getOptionsModel()->getCoinControlFeatures());
        coinControlUpdateLabels();
    }

开发者ID:BlockPioneers，项目名称:1337，代码行数:35，代码来源:sendcoinsdialog.cpp

示例2: setBalance

void SendCoinsDialog::setModel(WalletModel *model)
{
    this->model = model;

    for(int i = 0; i < ui->entries->count(); ++i)
    {
        SendCoinsEntry *entry = qobject_cast<SendCoinsEntry*>(ui->entries->itemAt(i)->widget());
        if(entry)
        {
            entry->setModel(model);
        }
    }
    if(model && model->getOptionsModel())
    {
        setBalance(model->getBalance(), model->getStake(), model->getUnconfirmedBalance(), model->getImmatureBalance());
        connect(model, SIGNAL(balanceChanged(qint64, qint64, qint64, qint64)), this, SLOT(setBalance(qint64, qint64, qint64, qint64)));
        connect(model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(updateDisplayUnit()));

        // Coin Control
        connect(model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(coinControlUpdateLabels()));
        connect(model->getOptionsModel(), SIGNAL(coinControlFeaturesChanged(bool)), this, SLOT(coinControlFeatureChanged(bool)));
        connect(model->getOptionsModel(), SIGNAL(transactionFeeChanged(qint64)), this, SLOT(coinControlUpdateLabels()));
        ui->frameCoinControl->setVisible(model->getOptionsModel()->getCoinControlFeatures());
        coinControlUpdateLabels();
    }

开发者ID:PosCoinDev，项目名称:PosCoin-master，代码行数:25，代码来源:sendcoinsdialog.cpp

示例3: setBalance

void SendCoinsDialog::updateDisplayUnit()
{
    setBalance(model->getBalance(), 0, 0, 0, 0, 0);
    ui->customFee->setDisplayUnit(model->getOptionsModel()->getDisplayUnit());
    updateMinFeeLabel();
    updateSmartFeeLabel();
}

开发者ID:josephbisch，项目名称:namecoin-core-1，代码行数:7，代码来源:sendcoinsdialog.cpp

示例4: setBalance

Credit::Credit(float balance, float interest, string pin, bool paid)
{
    setBalance(balance);
    setInterest(interest);
    setPin(pin);
    paid_=paid;
}

开发者ID:hdamon001，项目名称:CSCI-21-SPRING-2016，代码行数:7，代码来源:credit.cpp

示例5: getCellMinV

void Balancer::startBalacing()
{
    //test if battery has recovered after last balancing
    if(!isStable(balancerStartStableCount) || !AnalogInputs::isOutStable())
        return;

    if(minCell < 0) {
        minCell = getCellMinV();
    }
    AnalogInputs::ValueType vmin = getV(minCell);

    //test if we can still discharge
    bool off = true;
    AnalogInputs::ValueType VdisMin =  ProgramData::currentProgramData.getVoltagePerCell(ProgramData::VDischarge);
    for(int i = 0; i < cells; i++) {
        //save voltage values
        AnalogInputs::ValueType v = getV(i);
        if(v < VdisMin) {
            off = true;
            break;
        }
        if(v > vmin) {
            off = false;
        }
        Von_[i] = Voff_[i] = v;
    }

    savedVon = false;
    startBalanceTimeSecondsU16_ = Time::getSecondsU16();
    if(off) {
        endBalancing();
    } else {
        setBalance(calculateBalance());
    }
}

开发者ID:Djok39，项目名称:cheali-charger，代码行数:35，代码来源:Balancer.cpp

示例6: setBalance

void SendCoinsDialog::setModel(WalletModel *_model)
{
    this->model = _model;

    if(_model && _model->getOptionsModel())
    {
        for(int i = 0; i < ui->entries->count(); ++i)
        {
            SendCoinsEntry *entry = qobject_cast<SendCoinsEntry*>(ui->entries->itemAt(i)->widget());
            if(entry)
            {
                entry->setModel(_model);
            }
        }

        interfaces::WalletBalances balances = _model->wallet().getBalances();
        setBalance(balances);
        connect(_model, &WalletModel::balanceChanged, this, &SendCoinsDialog::setBalance);
        connect(_model->getOptionsModel(), &OptionsModel::displayUnitChanged, this, &SendCoinsDialog::updateDisplayUnit);
        updateDisplayUnit();

        // Coin Control
        connect(_model->getOptionsModel(), &OptionsModel::displayUnitChanged, this, &SendCoinsDialog::coinControlUpdateLabels);
        connect(_model->getOptionsModel(), &OptionsModel::coinControlFeaturesChanged, this, &SendCoinsDialog::coinControlFeatureChanged);
        ui->frameCoinControl->setVisible(_model->getOptionsModel()->getCoinControlFeatures());
        coinControlUpdateLabels();

        // fee section
        for (const int n : confTargets) {
            ui->confTargetSelector->addItem(tr("%1 (%2 blocks)").arg(GUIUtil::formatNiceTimeOffset(n*Params().GetConsensus().nPowTargetSpacing)).arg(n));
        }
        connect(ui->confTargetSelector, static_cast<void (QComboBox::*)(int)>(&QComboBox::currentIndexChanged), this, &SendCoinsDialog::updateSmartFeeLabel);
        connect(ui->confTargetSelector, static_cast<void (QComboBox::*)(int)>(&QComboBox::currentIndexChanged), this, &SendCoinsDialog::coinControlUpdateLabels);
        connect(ui->groupFee, static_cast<void (QButtonGroup::*)(int)>(&QButtonGroup::buttonClicked), this, &SendCoinsDialog::updateFeeSectionControls);
        connect(ui->groupFee, static_cast<void (QButtonGroup::*)(int)>(&QButtonGroup::buttonClicked), this, &SendCoinsDialog::coinControlUpdateLabels);
        connect(ui->customFee, &BitcoinAmountField::valueChanged, this, &SendCoinsDialog::coinControlUpdateLabels);
        connect(ui->checkBoxMinimumFee, &QCheckBox::stateChanged, this, &SendCoinsDialog::setMinimumFee);
        connect(ui->checkBoxMinimumFee, &QCheckBox::stateChanged, this, &SendCoinsDialog::updateFeeSectionControls);
        connect(ui->checkBoxMinimumFee, &QCheckBox::stateChanged, this, &SendCoinsDialog::coinControlUpdateLabels);
        ui->customFee->setSingleStep(model->wallet().getRequiredFee(1000));
        updateFeeSectionControls();
        updateMinFeeLabel();
        updateSmartFeeLabel();

        // set the smartfee-sliders default value (wallets default conf.target or last stored value)
        QSettings settings;
        if (settings.value("nSmartFeeSliderPosition").toInt() != 0) {
            // migrate nSmartFeeSliderPosition to nConfTarget
            // nConfTarget is available since 0.15 (replaced nSmartFeeSliderPosition)
            int nConfirmTarget = 25 - settings.value("nSmartFeeSliderPosition").toInt(); // 25 == old slider range
            settings.setValue("nConfTarget", nConfirmTarget);
            settings.remove("nSmartFeeSliderPosition");
        }
        if (settings.value("nConfTarget").toInt() == 0)
            ui->confTargetSelector->setCurrentIndex(getIndexForConfTarget(model->wallet().getConfirmTarget()));
        else
            ui->confTargetSelector->setCurrentIndex(getIndexForConfTarget(settings.value("nConfTarget").toInt()));
    }
}

开发者ID:FeatherCoin，项目名称:Feathercoin，代码行数:59，代码来源:sendcoinsdialog.cpp

示例7: setBalance

void OverviewPage::displayUnitChanged()
{
    if(currentBalance != -1)
        setBalance(currentBalance, currentUnconfirmedBalance);

    txdelegate->unit = model->getOptionsModel()->getDisplayUnit();
    ui->listTransactions->update();
}

开发者ID:flower1024，项目名称:bitcoin-qt，代码行数:8，代码来源:overviewpage.cpp

示例8: setBalance

void LLStatusBar::setUPC(S32 upc)
{
	mTextUPC->setText("UPC " + LLResMgr::getInstance()->getMonetaryString(upc));

	mUPC = upc;

	setBalance(mBalance);
}

开发者ID:OS-Development，项目名称:VW.Singularity，代码行数:8，代码来源:llstatusbar.cpp

示例9: setCardNumber

void IQLoyaltyCard::reset()
{
    setCardNumber("");
    setCardSecret("");
    setCustomerShortName("");
    setCardUsageId(-1);
    setBalance(0);
    setPointsBalance(0);
}

开发者ID:0x6368656174，项目名称:iqEcKiosk，代码行数:9，代码来源:iqloyaltycard.cpp

示例10: setBalance

void SendCoinsDialog::setModel(WalletModel *model)
{
    this->model = model;

    for(int i = 0; i < ui->entries->count(); ++i)
    {
        SendCoinsEntry *entry = qobject_cast<SendCoinsEntry*>(ui->entries->itemAt(i)->widget());
        if(entry)
        {
            entry->setModel(model);
        }
    }
    if(model && model->getOptionsModel())
    {
        setBalance(model->getBalance(), model->getUnconfirmedBalance(), model->getImmatureBalance());
        connect(model, SIGNAL(balanceChanged(qint64, qint64, qint64)), this, SLOT(setBalance(qint64, qint64, qint64)));
        connect(model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(updateDisplayUnit()));
    }

开发者ID:Gnos1s，项目名称:anoncoin，代码行数:18，代码来源:sendcoinsdialog.cpp

示例11: setBalance

void SendCoinsDialog::updateDisplayUnit()
{
    setBalance(model->getBalance(), model->getUnconfirmedBalance(), model->getImmatureBalance(), model->getAnonymizedBalance(),
                   model->getWatchBalance(), model->getWatchUnconfirmedBalance(), model->getWatchImmatureBalance());
    CoinControlDialog::coinControl->fUsePrivateSend = ui->checkUsePrivateSend->isChecked();
    coinControlUpdateLabels();
    ui->customFee->setDisplayUnit(model->getOptionsModel()->getDisplayUnit());
    updateMinFeeLabel();
    updateSmartFeeLabel();
}

开发者ID:Dash3，项目名称:dash，代码行数:10，代码来源:sendcoinsdialog.cpp

示例12: setBalance

void SendCoinsDialog::setModel(WalletModel *model)
{
  this->model = model;

  for(int i = 0; i < ui->entries->count(); ++i)
  {
    SendCoinsEntry *entry = qobject_cast<SendCoinsEntry*>(ui->entries->itemAt(i)->widget());
    if(entry)
    {
      entry->setModel(model);
    }
  }
  if(model)
  {
    setBalance(model->getBalance(), model->getStake(), model->getUnconfirmedBalance());
    connect(model, SIGNAL(balanceChanged(qint64, qint64, qint64, BurnCoinsBalances)), 
            this, SLOT(setBalance(qint64, qint64, qint64)));
  }
}

开发者ID:lin0sspice，项目名称:Slimcoin-slimcoin，代码行数:19，代码来源:sendcoinsdialog.cpp

示例13: setResampler

DSP::DSP() {
  setResampler(ResampleEngine::Hermite);
  setResamplerFrequency(44100.0);

  setChannels(2);
  setPrecision(16);
  setFrequency(44100.0);
  setVolume(1.0);
  setBalance(0.0);

  clear();
}

开发者ID:Brunnis，项目名称:bsnes-mercury，代码行数:12，代码来源:core.hpp

示例14: setBalance

void SendCoinsDialog::setModel(WalletModel *model)
{
    this->model = model;

    if(model && model->getOptionsModel())
    {
        for(int i = 0; i < ui->entries->count(); ++i)
        {
            SendCoinsEntry *entry = qobject_cast<SendCoinsEntry*>(ui->entries->itemAt(i)->widget());
            if(entry)
            {
                entry->setModel(model);
            }
        }

        setBalance(model->getBalance(), model->getUnconfirmedBalance(), model->getImmatureBalance(),
                   model->getWatchBalance(), model->getWatchUnconfirmedBalance(), model->getWatchImmatureBalance());
        connect(model, SIGNAL(balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount)), this, SLOT(setBalance(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount)));
        connect(model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(updateDisplayUnit()));
        updateDisplayUnit();

        // Coin Control
        connect(model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(coinControlUpdateLabels()));
        connect(model->getOptionsModel(), SIGNAL(coinControlFeaturesChanged(bool)), this, SLOT(coinControlFeatureChanged(bool)));
        ui->frameCoinControl->setVisible(model->getOptionsModel()->getCoinControlFeatures());
        coinControlUpdateLabels();

        // fee section
        connect(ui->sliderSmartFee, SIGNAL(valueChanged(int)), this, SLOT(updateSmartFeeLabel()));
        connect(ui->sliderSmartFee, SIGNAL(valueChanged(int)), this, SLOT(updateGlobalFeeVariables()));
        connect(ui->sliderSmartFee, SIGNAL(valueChanged(int)), this, SLOT(coinControlUpdateLabels()));
        connect(ui->groupFee, SIGNAL(buttonClicked(int)), this, SLOT(updateFeeSectionControls()));
        connect(ui->groupFee, SIGNAL(buttonClicked(int)), this, SLOT(updateGlobalFeeVariables()));
        connect(ui->groupFee, SIGNAL(buttonClicked(int)), this, SLOT(coinControlUpdateLabels()));
        connect(ui->groupCustomFee, SIGNAL(buttonClicked(int)), this, SLOT(updateGlobalFeeVariables()));
        connect(ui->groupCustomFee, SIGNAL(buttonClicked(int)), this, SLOT(coinControlUpdateLabels()));
        connect(ui->customFee, SIGNAL(valueChanged()), this, SLOT(updateGlobalFeeVariables()));
        connect(ui->customFee, SIGNAL(valueChanged()), this, SLOT(coinControlUpdateLabels()));
        connect(ui->checkBoxMinimumFee, SIGNAL(stateChanged(int)), this, SLOT(setMinimumFee()));
        connect(ui->checkBoxMinimumFee, SIGNAL(stateChanged(int)), this, SLOT(updateFeeSectionControls()));
        connect(ui->checkBoxMinimumFee, SIGNAL(stateChanged(int)), this, SLOT(updateGlobalFeeVariables()));
        connect(ui->checkBoxMinimumFee, SIGNAL(stateChanged(int)), this, SLOT(coinControlUpdateLabels()));
        // LemonCoin: Disable free transactions
        // connect(ui->checkBoxFreeTx, SIGNAL(stateChanged(int)), this, SLOT(updateGlobalFeeVariables()));
        // connect(ui->checkBoxFreeTx, SIGNAL(stateChanged(int)), this, SLOT(coinControlUpdateLabels()));
        ui->customFee->setSingleStep(CWallet::minTxFee.GetFeePerK());
        updateFeeSectionControls();
        updateMinFeeLabel();
        updateSmartFeeLabel();
        updateGlobalFeeVariables();
    }
}

开发者ID:fflo，项目名称:lemoncoin，代码行数:52，代码来源:sendcoinsdialog.cpp

示例15: setBalance

void QPageIncomeExpense::setModel(WalletModel *model)
{
    this->model = model;

    if (model && model->getOptionsModel())
    {
        // Keep up to date with wallet
        setBalance(model->getBalance(), model->getStake(), model->getUnconfirmedBalance(), model->getImmatureBalance());
        connect(model, SIGNAL(balanceChanged(qint64, qint64, qint64, qint64)), this, SLOT(setBalance(qint64, qint64, qint64, qint64)));

        setNumTransactions(model->getNumTransactions());
        connect(model, SIGNAL(numTransactionsChanged(int)), this, SLOT(setNumTransactions(int)));
    }

开发者ID:StealthSend，项目名称:Stealth，代码行数:13，代码来源:qpageincomeexpense.cpp

示例16: TransactionFilterProxy

void OverviewPage::setWalletModel(WalletModel *model)
{
    this->walletModel = model;
    if(model && model->getOptionsModel())
    {
        // Set up transaction list
        filter = new TransactionFilterProxy();
        filter->setSourceModel(model->getTransactionTableModel());
        filter->setLimit(NUM_ITEMS);
        filter->setDynamicSortFilter(true);
        filter->setSortRole(Qt::EditRole);
        filter->sort(TransactionTableModel::Status, Qt::DescendingOrder);

        ui->listTransactions->setModel(filter);
        ui->listTransactions->setModelColumn(TransactionTableModel::ToAddress);

        // Keep up to date with wallet
        setBalance(model->getBalance(), model->getUnconfirmedBalance(), model->getImmatureBalance());
        connect(model, SIGNAL(balanceChanged(qint64, qint64, qint64)), this, SLOT(setBalance(qint64, qint64, qint64)));

        connect(model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(updateDisplayUnit()));
    }

开发者ID:ClaireDuSoleil，项目名称:Legocoin，代码行数:22，代码来源:overviewpage.cpp

示例17: setBalance

void TransactionView::updateDisplayUnit()
{
    if(walletModel && walletModel->getOptionsModel())
    {
        if(currentBalance != -1)
            setBalance(currentBalance, currentUnconfirmedBalance, currentImmatureBalance);

        // Update txdelegate->unit with the current unit
        //txdelegate->unit = walletModel->getOptionsModel()->getDisplayUnit();

        //ui->listTransactions->update();
    }
}

开发者ID:zebbra2014，项目名称:bitcredit，代码行数:13，代码来源:transactionview.cpp

示例18: getV

void Balancer::powerOn()
{
    hardware::setBalancerOutput(true);

    for(uint8_t i = 0; i < MAX_BALANCE_CELLS; i++) {
        AnalogInputs::ValueType vi = getV(i);
        Voff_[i] = Von_[i] = vi;
    }
    balance = 0;
    done = false;
    setBalance(0);
    balancingEnded = 0;
    resetMinCell();
}

开发者ID:sparcisgone，项目名称:cheali-charger，代码行数:14，代码来源:Balancer.cpp

示例19: startBalacing

Strategy::statusType Balancer::doStrategy()
{
    if(balance == 0) {
            startBalacing();
    } else {
        trySaveVon();
        if(getBalanceTime() > maxBalanceTime) {
            setBalance(0);
        }
    }
    if((!isWorking()) && done)
        return Strategy::COMPLETE;
    return Strategy::RUNNING;
}

开发者ID:Djok39，项目名称:cheali-charger，代码行数:14，代码来源:Balancer.cpp

示例20: setActive

Pad::Pad(const QDomElement & dom_elem) {
    if( dom_elem.attribute("active") == "1" ) 
        setActive(1);
    else
        setActive(0);

    if ( ! dom_elem.attribute("volume").isNull()) {
        setVolume(dom_elem.attribute("volume").toInt());
    }

    if ( ! dom_elem.attribute("balance").isNull()) {
        setBalance(dom_elem.attribute("balance").toInt());
    }
}

开发者ID:amarandon，项目名称:slag，代码行数:14，代码来源:Pad.cpp

注：本文中的setBalance函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ setBaudRate函数代码示例发布时间：2022-05-30

C++ setBackgroundVisible函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19155|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9980|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8632|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9648|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8615|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7530|2022-11-06

客服电话

电子邮件

C++ setBalance函数代码示例

示例1: tr

示例2: setBalance

示例3: setBalance

示例4: setBalance

示例5: getCellMinV

示例6: setBalance

示例7: setBalance

示例8: setBalance

示例9: setCardNumber

示例10: setBalance

示例11: setBalance

示例12: setBalance

示例13: setResampler

示例14: setBalance

示例15: setBalance

示例16: TransactionFilterProxy

示例17: setBalance

示例18: getV

示例19: startBalacing

示例20: setActive

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

切微信小程序前端制作-设备管理主界面

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

zendesk/android-floating-action-button:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053