C++ serialOpen函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中serialOpen函数的典型用法代码示例。如果您正苦于以下问题：C++ serialOpen函数的具体用法？C++ serialOpen怎么用？C++ serialOpen使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了serialOpen函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: serialOpen

int   Serial::Open (){
        if ((this->fd = serialOpen (this->device, this->baud)) < 0)
          {
//		std::cout << "Unable to open serial device\n";
          	return 0 ;
          }
	else
	  {
		//std::cout << "Serial port opened\n";
		this->fd = serialOpen(this->device, this->baud);
		return this->fd;
	  }
}

开发者ID:tyharbert，项目名称:SeniorDesign，代码行数:13，代码来源:xSerial.hpp

示例2: main

int main ()
{
  int fd;
  unsigned char data=3;


  if ((fd = serialOpen ("/dev/ttyAMA0", 9600))<0)
  {
	fprintf (stderr, "Unable to open serial device: %s\n", strerror (errno));
	return 1;
  }


  printf ("\nRaspberry Pi UART Test \n");
  
  while(1)
  {

	  serialPutchar(fd,data);
//	  printf ("\nPC > RPi = %c", (char)data);
  
//	  serialPutchar(fd, data);
//	  serialPuts(fd, "\n");
	  fflush(stdout);
  }
  

  return 0 ;
}

开发者ID:insungHwang，项目名称:bob.io，代码行数:29，代码来源:SerialTest.cpp

示例3: main

int main(int argc, char *argv[]) {
  char *serialPort;
  unsigned char prev, curr;
  int count, errors;

  if (argc != 2) {
    printf("Usage: %s <serial port>\n", argv[0]);
    exit(1);
  }
  serialPort = argv[1];
  serialOpen(serialPort);
  count = 0;
  errors = 0;
  while (!serialRcv(&prev)) ;
  count++;
  while (count < 100000) {
    while (!serialRcv(&curr)) ;
    count++;
    if (((prev + 1) & 0xFF) != curr) {
      errors++;
    }
    prev = curr;
  }
  if (sfd != 0) {
    serialClose();
    sfd = 0;
  }
  printf("count = %d (ok = %d, errors = %d)\n",
         count, count - errors, errors);
  return 0;
}

开发者ID:freecores，项目名称:eco32，代码行数:31，代码来源:receive.c

示例4: main

int main(int argc, char *argv[]){
        if (argc < 3 ){
                printf("Usage:\nlcdprint line col [text]\n");
                return 1;
        }else{
                int col=atoi(argv[2]);
                if (col<0 || col> 15){
                        printf("col must be between 0 and 15\n");
                        return 2;
                }
                int line=atoi(argv[1]);
                if (line<0 || line> 1){
                        printf("col must be between 0 and 1\n");
                        return 3;
                }
                lcd=serialOpen(SERIAL, BAUD_RATE);
                setLCDCursor(line*16+col);
				if (argc>3){
					int i;
					for (i=3;i<argc;i++){
							serialPuts(lcd, argv[i]);
							if (i<argc-1){
									serialPuts(lcd, " ");
							}
					}
				}else{
					char c;
					while ((c=getchar()) !=255){
						serialPutchar(lcd, c); 
					}
				}
                serialClose(lcd);
                return 0;
        }
}

开发者ID:zorglub42，项目名称:tools，代码行数:35，代码来源:lcdprint.c

示例5: main

int main ()
{
	int fd,i=0;
	fd= serialOpen("/dev/ttyAMA0",115200);
	if(fd < 0)  { printf("Opening serial failed.\n"); return 0; }

	while(i<10)
	{
		delay(500);
		serialPutchar(fd,i);
		i++;

		//printf("serialDataAvail: %d\n", serialDataAvail(fd));

		if(serialDataAvail(fd) >= 1)
		{
       			printf ("->%d\n", serialGetchar(fd));
       			fflush (stdout);
		}
	}

	printf("Serial port closing.\n");
	serialClose(fd);
	return 0;
}

开发者ID:RaghavAbboy，项目名称:smartKeyPi，代码行数:25，代码来源:serial.c

示例6: main

int main (int argc, char **argv)
{
	char *ttnMsg;
	int usbPort=0;    //File descriptor for the USB port when we open it

	// Set up wifiCount if the parameter was passed
	if (argc==2) {
		ttnMsg=argv[1];
	} else {
		printf("Usage hotspotuno ttnMsg\n");
		return 1;
	}
	
	usbPort=serialOpen("/dev/ttyACM0",9600);
	delay(1000);
	printf("Port opened, number %d \n",usbPort);
	if(usbPort) {
		delay(1000);
		printf("Pause...\n");
		serialPuts(usbPort, ttnMsg);
		printf("Message posted \n");
		delay(1000);
		serialClose(usbPort);
		printf("Port closed \n");
	}

	system(ttnMsg);
	
	return 0 ;
}

开发者ID:SamKimbinyi，项目名称:Hotspot，代码行数:30，代码来源:ttnpub.c

示例7: futabaInit

void futabaInit(void) {
    memset((void *)&futabaData, 0, sizeof(futabaData));

    radioData.serialPort = serialOpen(FUTABA_UART, FUTABA_BAUD, USART_HardwareFlowControl_None, FUTABA_RXBUF_SIZE, 0);
    serialChangeParity(radioData.serialPort, USART_Parity_Even);
    serialChangeStopBits(radioData.serialPort, USART_StopBits_2);
}

开发者ID:benzeng，项目名称:AutoQuad，代码行数:7，代码来源:futaba.c

示例8: main

int main(int argc, char **argv) {

	int com;
	char buff[1024];
	FILE *f;

	com=serialOpen("/dev/ttyUSB0");
	f=fdopen(com, "r");
	fgets(buff, 1024, f); //First line usually only comes in half; kill it.
        printf("Serialul pare ok..\n");



	if(argc<2) {
		printf("Usage: play inputfile");
		return 1;
	}


	while(1){
		float class = classifyInput(f, argv[2]);
		printf("Am detectat %i ", class);
	}

}

开发者ID:hackathon-ro，项目名称:Eppe，代码行数:25，代码来源:play.c

示例9: main

int main(int argc, char **argv) {
	int com;
	FILE *f;
	char buff[1024];
	int samps;
	int n;
	com=serialOpen("/dev/ttyUSB0");
	f=fdopen(com, "r");
	fgets(buff, 1024, f); //First line usually only comes in half; kill it.
	printf("Serialul pare ok..\n");

	if (argc<3) {
		printf("Usage: %s [-printavg samps|-gentrain label [no_samples]|-autotrain classes filename [no_samples]|-classify svm-model-prefix]\n", argv[0]);
		return 1;
	}
	if (strcmp(argv[1], "-printavg")==0) {
		printAvgValsOver(f, atoi(argv[2]));
	} else if (strcmp(argv[1], "-gentrain")==0) {
		if(argc==4) {
			printf("Am 3 parametrii\n");
			genLibSvmTrainSet(f, atoi(argv[2]), argv[3],DEFAULT_SAMPLES);
		}else if(argc==5){
			printf("Am 4 parametrii\n");
			genLibSvmTrainSet(f, atoi(argv[2]), argv[3],atoi(argv[4]));
		}else{
			printf("Error");
		}
	} else if (strcmp(argv[1], "-autotrain")==0) {
		int i = 0;
		for(i = 0; i< atoi(argv[2]); i++) {

			printf("Ne antrenam pt comanda %i.\n",i);

			if(argc==3){ //assume default no_sample
				genLibSvmTrainSet(f, i, argv[3],DEFAULT_SAMPLES);
			} else {
				genLibSvmTrainSet(f, i, argv[3],atoi(argv[4]));
			}

			if(i< atoi(argv[2]) - 1) {
				printf("Urmatoarea clasa in 2secunde..");
				sleep(3);
			}
		}

		printf("Dau svm-easy\n");
		printf(argv[3]);
		printf("\n");
		char cmd[90];
		sprintf(cmd, "svm-easy %s", argv[3]);
		printf("Comanda e %s",cmd);
		system(cmd);

		//run the new classification
		classifyInput(f, argv[3]);

	} else if (strcmp(argv[1], "-classify")==0) {
			classifyInput(f, argv[2]);
	}
}

开发者ID:Peterthegreat，项目名称:Epee，代码行数:60，代码来源:main.c

示例10: initializeModule

// Initialize the WiFi Module serial port and return the file descriptor for the
// serial port.
int initializeModule() {
    int fd;

    //open serial port
    if ((fd = serialOpen ("/dev/ttyAMA0", 115200)) < 0)
    {
        //fprintf (stderr, "Unable to open serial device: %s\n", strerror (errno)) ;
        syslog (LOG_ERR, "Unable to open serial device: %s\n", strerror (errno)) ;
        return 1 ;
    }

    //The wiringPi's kernel setup procedures
    if (wiringPiSetup () == -1)
    {
        //fprintf (stdout, "Unable to start wiringPi: %s\n", strerror (errno)) ;
        syslog (LOG_ERR, "Unable to start wiringPi: %s\n", strerror (errno)) ;
        return 1 ;
    }

    fflush (stdout) ;
    //serialFlush(fd);

    return fd;

}

开发者ID:SlugCam，项目名称:SCnode，代码行数:27，代码来源:wificmd.c

示例11: main

int main(void)
{
	int fd;
	unsigned char pos = 0;
	unsigned char buf[4] = {0};
	unsigned char *buf1 = "hello\n";

	fd = serialOpen("/dev/ttyAMA0", 9600);	

	unsigned char tmp;

	while(1){
	//	scanf("%d", &pos);
	//	snprintf(buf, 4, "%d", pos);
		//printf("*** %s\n",buf);
		serialPrintf(fd, "120\r\n");
		sleep(1);
		serialPrintf(fd, "20\r\n");
		sleep(1);
		serialPrintf(fd, "150\r\n");
		sleep(1);
		delay(2500);
	}

	serialClose(fd);

	return 0;
}

开发者ID:rajivvishwa，项目名称:RaspberryPi-Project，代码行数:28，代码来源:servo_Rpi.c

示例12: serialComms

void* serialComms(void* arg) {
  fdSerial = serialOpen("/dev/ttyAMA0",115200);
  if(fdSerial == -1) {
    std::cout <<"error opening serial port"<<std::endl;
  } else {
    int lastCh,bufLen;
    unsigned char buf[SERIALBUFLEN];
    //struct termios options;
    //    tcgetattr(fdSerial, &options);
    //options.c_cc[VTIME]=100;// 5 x 0.1 sec = 0.5 sec timeout
    //tcsetattr(fdSerial, TCSANOW, &options);

    while(!shutdown) {
      bufLen=0;
      do {
	lastCh=serialGetchar(fdSerial);
	if(lastCh>0) {
	  buf[bufLen]=((unsigned char)lastCh) % 256;
	  bufLen++;
	}
      } while(lastCh>0 && bufLen<SERIALBUFLEN && !shutdown);
      for(int i=0;i<bufLen;i++) {
	// process buffer
	std::cout << buf[i]<<std::flush;
      }
      if(lastCh<=0) {
	// timeout could indicate problem with mcu
	//std::cout<<"|timeout|"<<std::flush;
      }
    }
    serialClose(fdSerial);
  }
  return NULL;
}

开发者ID:4levity，项目名称:antbike，代码行数:34，代码来源:antlights.cpp

示例13: serialOpen

void Controller::runUart() {
	int fd = serialOpen(UART_DEVICE, 9600);
	int bSize = 0; // ilość znaków w buforze
	while(!endThreads) {
		bSize = serialDataAvail(fd);
		if(bSize==8) { // dwa inty czekają na odczyt
			union IntOrByte {
				char b[4];
				int i;
			} u;
			
			// odczyt kierunku wiatru
			for (int i =0; i < 4; i++) { //odczytaj 4 bajty
				u.b[i] = serialGetchar(fd);
			}
			this->windDirection = u.i;

			// odczyt prędkości wiatru
			u.i = 0; // resetujemy union
			for (int i =0; i < 4; i++) { //odczytaj 4 bajty
				u.b[i] = serialGetchar(fd);
			}
			this->windSpeed = u.i;
		} else if(bSize>8) { // zbyt dużo informacji w buforze
			serialFlush(fd);
		}

		chrono::milliseconds sleepDuration(500);
		this_thread::sleep_for(sleepDuration);
	}
	serialClose(fd);
	dlog << "koniec threadWorker";
}

开发者ID:tmazur，项目名称:RaspberryPi-Wind-Powered-Robot-Navigation，代码行数:33，代码来源:controller.cpp

示例14: la_init_controls

int la_init_controls(int** fdControls, int* fdControlCount)
{
	int ret;

	ret = wiringPiSetup();
	if(ret) return ret;

	if ((fdsArduino[0] = serialOpen ("/dev/ttyAMA0", 9600)) < 0)
    {
    	fprintf (stderr, "E: Unable to open serial device: %s\n", strerror (errno)) ;
    	return -1;
    }

    serialFlush(fdsArduino[0]);

    fArduino = fdopen(fdsArduino[0], "r");

    buf_len = 128;
    buf = malloc(buf_len);
    if(!buf)
    {
    	fprintf (stderr, "E: Unable to allocate buffer: %s\n", strerror (errno)) ;
    	return -1;
    }

	*fdControls = fdsArduino;
	*fdControlCount = 1;
	return 0;
}

开发者ID:elelay，项目名称:LecteurAudio，代码行数:29，代码来源:serial_bridge.c

示例15: main

int main(int argc, char *argv[]) {
  unsigned char curr;
  int count;

  if (argc != 1) {
    printf("Usage: %s\n", argv[0]);
    exit(1);
  }
  serialOpen();
  curr = 0;
  count = 0;
  while (count < 100000) {
    while (!serialSnd(curr)) ;
    curr = (curr + 1) & 0xFF;
    count++;
  }
  printf("count = %d\n", count);
  while (!serialRcv(&curr)) ;
  printf("answer = %c\n", curr);
  if (sfd != 0) {
    serialClose();
    sfd = 0;
  }
  return 0;
}

开发者ID:Logout22，项目名称:Escape，代码行数:25，代码来源:send.c

示例16: init

/********************************************************************
* init:																*
* initializes the program											*
********************************************************************/
void init()
{
	/* Initialize serial port for xbee comm */
	wiringPiSetup();
	if((serialFd = serialOpen("/dev/ttyAMA0", BAUD_RATE)) < 0)
		error("error opening serial port");

	//initialize the mutex
	pthread_mutex_init(&flagMutex, NULL);

	// Set up sig handler for USR1 signal (restart recv thread)
	if (signal(SIGUSR1, sig_handler) == SIG_ERR)
        error("error setting up the sig_handler\n");

    update.desiredFlowRate = MAX_FLOW;
    update.frequency = MAX_FREQ;
    update.VFDState = ON_VFD;
    // set all flags for first run
    LOCK(&flagMutex);
    update.updateFlag = UPDATE_FREQ_STATE | UPDATE_FLOW;
    UNLOCK(&flagMutex);

	// Initialize memory and flush remaining serial data
	serialFlush(serialFd);
    memset((void*)&data, 0, sizeof(data));
	memset((void*)&messageFromServer, 0, sizeof(messageFromServer));
	memset((void*)&messageFromVfd, 0, sizeof(messageFromVfd));

	// Create thread to monitor the socket and receive messages
	if( pthread_create(&thread_id, NULL, receive_handler, (void*)&thread_id) < 0)
		error("could not create recv thread");
}

开发者ID:kristinjm，项目名称:VICEproject，代码行数:36，代码来源:vfdController.c

示例17: gpsTask

void gpsTask(void *unused)
{
    gpsData.serial = serialOpen(USART1, 9600);
    gpsData.mode = MODE_NMEA;   // NMEA

    while (1) {
        CoTickDelay(25);

        while (uartAvailable(gpsData.serial)) {
            switch (gpsData.mode) {
            case MODE_NMEA:    // NMEA
                gpsData.validFrames += gpsNewFrameNMEA(uartRead(gpsData.serial));
                break;

            case MODE_UBX:     // UBX
                gpsData.validFrames += gpsNewFrameUBLOX(uartRead(gpsData.serial));
                break;

            case MODE_MTK:     // MTK
                break;

            case MODE_PASSTHROUGH:     // GPS -> UART bridge
                // TODO
                // usbSerialWrite(uartRead(gpsData.serial));
                break;
            }
        }
    }
}

开发者ID:CamBl98，项目名称:afrodevices，代码行数:29，代码来源:gps.c

示例18: futabaInit

void futabaInit(radioInstance_t *r, USART_TypeDef *uart) {
   memset((void *)&futabaData, 0, sizeof(futabaData));

    r->serialPort = serialOpen(uart, FUTABA_BAUD, USART_HardwareFlowControl_None, FUTABA_RXBUF_SIZE, 0);
    serialChangeParity(r->serialPort, USART_Parity_Even);
    serialChangeStopBits(r->serialPort, USART_StopBits_2);
}

开发者ID:jiezhi320，项目名称:aq_flight_control，代码行数:7，代码来源:futaba.c

示例19: main

int  main() {
	int c, res ,seq = 0 ,len;
	unsigned char result, serialRead;
	struct sockaddr_in receiver_addr;
	int sock_fd;

	/* Prepare Serial Port */
	if(serialOpen() != 0) return -1;
	signal(SIGINT, interrupt); //set ctrl-c handler

	/* Prepare Socket */
	sock_fd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
	receiver_addr.sin_family = AF_INET;
	if( inet_aton( ADDR,  &receiver_addr.sin_addr )== 0) {
		printf("Crap!, Init failed\n");
		close(sock_fd);
		return;
	}
	receiver_addr.sin_port = htons( PORT );

	while (isrunning) {   /*endless loop until ctrl-c is typed */
		serialRead = serialReadChar();
		printf("value is %c\n", serialRead);
		makeATCommand(at_command,seq,serialRead);
		len = strlen(at_command);
		sendto(sock_fd, at_command, len, 0,(struct sockaddr*)&receiver_addr,sizeof(receiver_addr));
		seq ++;
		
	}
 	
 	close(sock_fd);
	serialClose();

	return 0;
}

开发者ID:kenkenrep1ew，项目名称:auto_drone，代码行数:35，代码来源:auto_drone1.c

示例20: main

int main ()
{
    printf("Program started.\n");

    int ser_handle; // the serial connection (file descriptor)

    if ((ser_handle = serialOpen("/dev/ttyAMA0", BAUD_RATE)) < 0)
    {
        fprintf(stderr, "Unable to open serial device: %s\n", strerror(errno));
        return 1 ;
    }
    else
        printf("Serial open\n");

    int counter = 0;

    int avail_bytes;
    for(;;) {
        if(avail_bytes = serialDataAvail(ser_handle))
        {
            serialPutchar(ser_handle,serialGetchar(ser_handle));
            counter = counter + 1;
            if(counter%100 == 0) {
                printf("Byte %i has been passed on\n", counter);
            }
        }
    }
}

开发者ID:TobiasLundby，项目名称:Autonomous-precision-landing_BScF16_MHE-TL，代码行数:28，代码来源:simple_echo.c

注：本文中的serialOpen函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ serialPrint函数代码示例发布时间：2022-05-30

C++ serial函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19155|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9980|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8632|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9648|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8615|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7530|2022-11-06

客服电话

电子邮件

C++ serialOpen函数代码示例

示例1: serialOpen

示例2: main

示例3: main

示例4: main

示例5: main

示例6: main

示例7: futabaInit

示例8: main

示例9: main

示例10: initializeModule

示例11: main

示例12: serialComms

示例13: serialOpen

示例14: la_init_controls

示例15: main

示例16: init

示例17: gpsTask

示例18: futabaInit

示例19: main

示例20: main

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

切微信小程序前端制作-设备管理主界面

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

zendesk/android-floating-action-button:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053