• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ sentinel函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中sentinel函数的典型用法代码示例。如果您正苦于以下问题:C++ sentinel函数的具体用法?C++ sentinel怎么用?C++ sentinel使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了sentinel函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: project_bounding_on_axis

void project_bounding_on_axis(const Bounding *b, const Vector *axis, double *projection_start, double *projection_end)
{
    assert(b && "Bad bounding pointer.");
    assert(axis && "Bad axis pointer.");
    assert(projection_start && projection_end && "Bad projection pointers.");

    switch (b->bounding_type)
    {
        case bounding_box:
            project_box_on_axis(b, axis, projection_start, projection_end);
            return;

        case bounding_sphere:
            project_sphere_on_axis(b, axis, projection_start, projection_end);
            return;

        case bounding_composite:
            sentinel("Cannot project composite bounding.", "");

        default:
            sentinel("Unknown bounding type.", "");
    }

    error:
    assert(false);
}
开发者ID:aquirel,项目名称:morrigan,代码行数:26,代码来源:bounding.c


示例2: sky_property_get_standard_data_type_name

// Retrieves a reference to a standardized bstring that represents the name
// of the data type.
//
// type_name - The name of the type.
// ret       - A pointer to where the standardized type name should be returned.
//
// Returns 0 if successful, otherwise returns -1.
int sky_property_get_standard_data_type_name(bstring type_name, bstring *ret)
{
    check(type_name != NULL, "Type name required");
    check(ret != NULL, "Return pointer required");

    // Check against standard types.
    if(biseq(&SKY_DATA_TYPE_INT, type_name)) {
        *ret = &SKY_DATA_TYPE_INT;
    }
    else if(biseq(&SKY_DATA_TYPE_FLOAT, type_name)) {
        *ret = &SKY_DATA_TYPE_FLOAT;
    }
    else if(biseq(&SKY_DATA_TYPE_BOOLEAN, type_name)) {
        *ret = &SKY_DATA_TYPE_BOOLEAN;
    }
    else if(biseq(&SKY_DATA_TYPE_STRING, type_name)) {
        *ret = &SKY_DATA_TYPE_STRING;
    }
    // If this is not a standard type then return the name that came in.
    else {
        sentinel("Type is not a standard type: %s", bdata(type_name));
    }

    return 0;

error:
    return -1;
}
开发者ID:dasfaha,项目名称:sky,代码行数:35,代码来源:property.c


示例3: Command_install

int Command_install(
        apr_pool_t *p, const char *url, const char *configure_opts,
        const char *make_opts, const char *install_opts
) {
    int rc = 0;
    // first clean up
    check(Shell_exec(CLEANUP_SH, NULL) == 0,
          "Faild to clean up before building.");
    // next, make sure it isn't already installed
    rc = DB_find(url);
    check(rc != -1, "Error checking the installed database");
    if (rc == 1) {
        log_info("Package already installed.");
        return 0;
    }
    // it isn't installed. So, fetch.
    rc = Command_fetch(p, url, 0);
    // if fetch worked, build.
    if (rc == 1) {
        rc = Command_build(p, url, configure_opts, make_opts, install_opts);
    } else if (rc == 0) {
        // no install needed... I haven't read fetch yet so I'm not sure how
        // this would happen.
        log_info("Depends successfully installed: %s", url);
    } else {
        sentinel("Install failed: %s", url);
    }
    // cleanup again. It doesn't matter whether we check errors this time.
    Shell_exec(CLEANUP_SH, NULL);
    return 0;
error:
    return -1;
}
开发者ID:stroxler,项目名称:lcthw,代码行数:33,代码来源:commands.c


示例4: qip_ast_node_get_type

// Recursively determines the type of a node.
//
// node   - The node to determine the type for.
// module - The compilation unit this node is a part of.
// type   - A pointer to where the type should be returned.
//
// Returns 0 if successful, otherwise returns -1.
int qip_ast_node_get_type(qip_ast_node *node, qip_module *module,
                          qip_ast_node **type)
{
    int rc;
    check(node != NULL, "Node required");

    // Delegate to each type.
    switch(node->type) {
        case QIP_AST_TYPE_INT_LITERAL: rc = qip_ast_int_literal_get_type(node, type); break;
        case QIP_AST_TYPE_FLOAT_LITERAL: rc = qip_ast_float_literal_get_type(node, type); break;
        case QIP_AST_TYPE_BOOLEAN_LITERAL: rc = qip_ast_boolean_literal_get_type(node, type); break;
        case QIP_AST_TYPE_STRING_LITERAL: rc = qip_ast_string_literal_get_type(node, type); break;
        case QIP_AST_TYPE_NULL_LITERAL: rc = qip_ast_null_literal_get_type(node, type); break;
        case QIP_AST_TYPE_ARRAY_LITERAL: rc = qip_ast_array_literal_get_type(node, type); break;
        case QIP_AST_TYPE_BINARY_EXPR: rc = qip_ast_binary_expr_get_type(node, module, type); break;
        case QIP_AST_TYPE_VAR_REF: rc = qip_ast_var_ref_get_type(node, module, type); break;
        case QIP_AST_TYPE_SIZEOF: rc = qip_ast_sizeof_get_type(node, type); break;
        case QIP_AST_TYPE_OFFSETOF: rc = qip_ast_offsetof_get_type(node, type); break;
        case QIP_AST_TYPE_ALLOCA: rc = qip_ast_alloca_get_type(node, type); break;
        default: {
            sentinel("AST node does not have a type");
            break;
        }
    }
    check(rc == 0, "Unable to retrieve type name");
    
    return 0;

error:
    *type = NULL;
    return -1;
}
开发者ID:dasfaha,项目名称:sky,代码行数:39,代码来源:node.c


示例5: qip_ast_node_get_var_pointer

// Retrieves a variable pointer to a given node. This only works with variable
// references and struct member accesses.
//
// node    - The variable node to retrieve the pointer for.
// module  - The compilation unit this node is a part of.
// value   - A pointer to where the LLVM value should be returned.
//
// Returns 0 if successful, otherwise returns -1.
int qip_ast_node_get_var_pointer(qip_ast_node *node, qip_module *module,
                                 LLVMValueRef *value)
{
    int rc;
    
    check(node != NULL, "Node is required");
    check(module != NULL, "Module is required");
    check(module->llvm_module != NULL, "LLVM Module is required");
    check(module->compiler != NULL, "Module compiler is required");
    check(module->compiler->llvm_builder != NULL, "LLVM Builder is required");

    // Delegate codegen to AST nodes.
    switch(node->type) {
        case QIP_AST_TYPE_VAR_REF: {
            rc = qip_ast_var_ref_get_pointer(node, module, NULL, value);
            check(rc == 0, "Unable to retrieve pointer to variable reference");
            break;
        }
        default:
        {
            sentinel("Unable to retrieve pointer for AST node");
            break;
        }
    }
    
    return 0;
    
error:
    *value = NULL;
    return -1;
}
开发者ID:dasfaha,项目名称:sky,代码行数:39,代码来源:node.c


示例6: sky_event_data_sizeof

// Calculates the total number of bytes needed to store an event data.
//
// data - The event data item.
size_t sky_event_data_sizeof(sky_event_data *data)
{
    size_t sz = 0;
    sz += sizeof(data->key);
    switch(data->data_type) {
        case SKY_DATA_TYPE_INT:
            sz += minipack_sizeof_int(data->int_value);
            break;
        case SKY_DATA_TYPE_DOUBLE:
            sz += minipack_sizeof_double(data->double_value);
            break;
        case SKY_DATA_TYPE_BOOLEAN:
            sz += minipack_sizeof_bool(data->boolean_value);
            break;
        case SKY_DATA_TYPE_STRING:
            sz += minipack_sizeof_raw(blength(data->string_value));
            sz += blength(data->string_value);
            break;
        default:
            sentinel("Invalid data type (%d) for event data", data->data_type);
    }
    return sz;

error:
    return 0;
}
开发者ID:emiddleton,项目名称:sky,代码行数:29,代码来源:event_data.c


示例7: sky_event_data_copy

// Creates a copy of an event data item.
//
// source - The event data to copy.
// target - A reference to the new event data item.
//
// Returns 0 if successful, otherwise returns -1.
int sky_event_data_copy(sky_event_data *source, sky_event_data **target)
{
    check(source != NULL, "Event data source required for copy");

    switch(source->data_type) {
        case SKY_DATA_TYPE_STRING: 
            *target = sky_event_data_create_string(source->key, source->string_value);
            break;
        case SKY_DATA_TYPE_INT: 
            *target = sky_event_data_create_int(source->key, source->int_value);
            break;
        case SKY_DATA_TYPE_DOUBLE: 
            *target = sky_event_data_create_double(source->key, source->double_value);
            break;
        case SKY_DATA_TYPE_BOOLEAN:
            *target = sky_event_data_create_boolean(source->key, source->boolean_value);
            break;
        default:
            sentinel("Invalid data type (%d) for event data", source->data_type);
    }

    return 0;
    
error:
    if(*target) sky_event_data_free(*target);
    *target = NULL;
    
    return -1;
}
开发者ID:emiddleton,项目名称:sky,代码行数:35,代码来源:event_data.c


示例8: Map_del

void* Map_del(Map *map, char* key) {
	sentinel("not yet implemented");
	// if (map->length == 0) {
	//   return NULL;
	// }

	void *data = map->last->data;

	// if (map->length == 1) {
	//   free(map->last);
	//   map->last = NULL;
	//   map->first = NULL;
	// }

	// if (map->length > 1) {
	//   struct MapNode *removee = map->last;
	//   map->last = removee->prev;
	//   free(removee);
	//   map->last->next = NULL;
	// }

	// map->length--;

	return data;
error:
	return NULL;
}
开发者ID:schnauzer,项目名称:cream,代码行数:27,代码来源:map.c


示例9: malloc

Value *Value_create(ValueType type, void *data) {
    Value *val = malloc(sizeof(Value));
    val->type = type;
    switch(val->type) {
        case VAL_QSTRING: val->as.string = data;
            break;
        case VAL_NUMBER: val->as.number = data;
            break;
        case VAL_CLASS: val->as.cls = data;
            break;
        case VAL_LIST: val->as.list = data;
            break;
        case VAL_HASH: val->as.hash = data;
            break;
        case VAL_IDENT: val->as.ident = data;
            break;
        case VAL_REF: val->as.ref = data;
            break;
        default:
            sentinel("Unknown value type: %d", val->type);
    }

    return val;

error:
    return val;
}
开发者ID:304471720,项目名称:mongrel2,代码行数:27,代码来源:ast.c


示例10: GTBoard_Parse

int GTBoard_Parse(GTBoard* b, char* s)
{
  b->err = GTBoardError_None;
  int parsedUnits = 0;
  char* tok;
  GTLexer l;
  GTLexer_Init(&l, s);
  GTLexer_Skip(&l, whitespace);
  while ((tok = GTLexer_GetToken(&l, whitespace)) != NULL) {
    GTLexer_GetToken(&l, "{");
    char* s = GTLexer_GetToken(&l, "}");
    if (strcmp(tok, fileTokens[GTBoardFileToken_Units]) == 0) {
      check(GTBoard_ParseUnits(b, s) == 0, "parsing units failed");
      parsedUnits = 1;
    } else if (strcmp(tok, fileTokens[GTBoardFileToken_Tiles]) == 0) {
      check(!parsedUnits, "tiles must be read before units");
      check(GTBoard_ParseTiles(b, s) == 0, "parsing tiles failed");
    } else if (strcmp(tok, fileTokens[GTBoardFileToken_Options]) == 0) {
      // do nothing
    } else {
      sentinel("unidentified token %.*s", 80, tok);
    }
    GTLexer_Skip(&l, whitespace);
  }
  return 0;
  error:
  b->err = GTBoardError_BadParse;
  return -1;
}
开发者ID:ryutaroikeda,项目名称:gatherers,代码行数:29,代码来源:board.c


示例11: GTBoard_ParseUnit

int GTBoard_ParseUnit(GTBoard* b, char* tok, int pos)
{
  char u = tok[0];
  char l = tok[1];
  GTPlayer p = GTPlayer_None;
  if ('a' <= u && u <= 'z') {
    p = GTPlayer_Black;
  } else if ('A' <= u && u <= 'Z') {
    p = GTPlayer_White;
  } else {
    sentinel("invalid unit token %c", u);
  }
  GTUnitType t = GTUnitType_None;
  int i;
  for (i = 0; i < GTUnitType_Size; i++) {
    if (u != unitChar[p][i]) { continue; }
    t = i;
  }
  check(t != GTUnitType_None, "unrecognized unit %c", u);
  int life = l - '0';
  check(life > 0, "life = %d too low", life);
  check(GTBoard_CreateUnit(b, p, t, pos) == 0, "create unit failed");
  b->units[b->board[pos]].life = life;
  return 0;
  error:
  return -1;
}
开发者ID:ryutaroikeda,项目名称:gatherers,代码行数:27,代码来源:board.c


示例12: sky_path_add_event

// Adds an event to a path. An event can only be added if the event's object id
// matches the path's object id.
//
// path  - The path to add the event to.
// event - The event to add to the path.
//
// Returns 0 if successful, otherwise returns -1.
int sky_path_add_event(sky_path *path, sky_event *event)
{
    // Validation.
    check(path != NULL, "Path required");
    check(path->object_id != 0, "Path object id cannot be null");
    check(event != NULL, "Event required");
    check(path->object_id == event->object_id, "Event object id (%d) does not match path object id (%d)", event->object_id, path->object_id);

    // Raise error if event has already been added.
    unsigned int i;
    for(i=0; i<path->event_count; i++) {
        if(path->events[i] == event) {
            sentinel("Event has already been added to path");
        }
    }

    // Allocate space for event.
    path->event_count++;
    path->events = realloc(path->events, sizeof(sky_event*) * path->event_count);
    check_mem(path->events);

    // Append event to the end.
    path->events[path->event_count-1] = event;

    // Sort events.
    sort_events(path);

    return 0;

error:
    return -1;
}
开发者ID:gitaccount2,项目名称:sky,代码行数:39,代码来源:path.c


示例13: sentinel

void
ComputeIndicatorThread::onElement(const Elem * elem)
{
  for (const auto & it : _aux_sys._elem_vars[_tid])
  {
    MooseVariable * var = it.second;
    var->prepareAux();
  }

  _fe_problem.prepare(elem, _tid);
  _fe_problem.reinitElem(elem, _tid);

  // Set up Sentinel class so that, even if reinitMaterials() throws, we
  // still remember to swap back during stack unwinding.
  SwapBackSentinel sentinel(_fe_problem, &FEProblemBase::swapBackMaterials, _tid);

  _fe_problem.reinitMaterials(_subdomain, _tid);

  // Compute
  if (!_finalize)
  {
    if (_indicator_whs.hasActiveBlockObjects(_subdomain, _tid))
    {
      const std::vector<std::shared_ptr<Indicator>> & indicators =
          _indicator_whs.getActiveBlockObjects(_subdomain, _tid);
      for (const auto & indicator : indicators)
        indicator->computeIndicator();
    }
  }

  // Finalize
  else
  {
    if (_indicator_whs.hasActiveBlockObjects(_subdomain, _tid))
    {
      const std::vector<std::shared_ptr<Indicator>> & indicators =
          _indicator_whs.getActiveBlockObjects(_subdomain, _tid);
      for (const auto & indicator : indicators)
        indicator->finalize();
    }

    if (_internal_side_indicators.hasActiveBlockObjects(_subdomain, _tid))
    {
      const std::vector<std::shared_ptr<InternalSideIndicator>> & internal_indicators =
          _internal_side_indicators.getActiveBlockObjects(_subdomain, _tid);
      for (const auto & internal_indicator : internal_indicators)
        internal_indicator->finalize();
    }
  }

  if (!_finalize) // During finalize the Indicators should be setting values in the vectors manually
  {
    Threads::spin_mutex::scoped_lock lock(Threads::spin_mtx);
    for (const auto & it : _aux_sys._elem_vars[_tid])
    {
      MooseVariable * var = it.second;
      var->add(_aux_sys.solution());
    }
  }
}
开发者ID:mangerij,项目名称:moose,代码行数:60,代码来源:ComputeIndicatorThread.C


示例14: bind_this_thread

bool bind_this_thread( const std::pair<unsigned,unsigned> coord )
{
  if ( ! sentinel() ) return false ;

#if DEBUG_PRINT

  std::cout << "Kokkos::bind_this_thread() at " ;

  hwloc_get_last_cpu_location( s_hwloc_topology ,
                               s_hwloc_location , HWLOC_CPUBIND_THREAD );

  print_bitmap( std::cout , s_hwloc_location );

  std::cout << " to " ;

  print_bitmap( std::cout , s_core[ coord.second + coord.first * s_core_topology.second ] );

  std::cout << std::endl ;

#endif

  // As safe and fast as possible.
  // Fast-lookup by caching the coordinate -> hwloc cpuset mapping in 's_core'.
  return coord.first  < s_core_topology.first &&
         coord.second < s_core_topology.second &&
         0 == hwloc_set_cpubind( s_hwloc_topology ,
                                 s_core[ coord.second + coord.first * s_core_topology.second ] ,
                                 HWLOC_CPUBIND_THREAD | HWLOC_CPUBIND_STRICT );
}
开发者ID:UoB-HPC,项目名称:TeaLeaf,代码行数:29,代码来源:Kokkos_hwloc.cpp


示例15: free_sexp

/* free_sexp: free all the memory allocated by reading an s-expression
 */
void free_sexp( struct node *sexp )
{
	if( sexp != NULL )
	{
		switch( sexp->tag )
		{
			case NAME:
				free( sexp->str );
				sexp->str = NULL;
				break;
			case NUM:
				break;
			case LST:
				free_sexp( sexp->sublst );
				sexp->sublst = NULL;
				break;
			default:
				sentinel("Non-existent tag: %d", sexp->tag);
				break;
		}
		free_sexp( sexp->rest );
		sexp->rest = NULL;
		free( sexp );
		sexp = NULL;
	}

error:
	return;
}
开发者ID:mjparrott,项目名称:FauxRacket,代码行数:31,代码来源:Sexp.c


示例16: sentinel

void
ComputeElemAuxVarsThread::onElement(const Elem * elem)
{
  if (_aux_kernels.hasActiveBlockObjects(_subdomain, _tid))
  {
    const std::vector<std::shared_ptr<AuxKernel>> & kernels =
        _aux_kernels.getActiveBlockObjects(_subdomain, _tid);
    _fe_problem.prepare(elem, _tid);
    _fe_problem.reinitElem(elem, _tid);

    // Set up the sentinel so that, even if reinitMaterials() throws, we
    // still remember to swap back.
    SwapBackSentinel sentinel(_fe_problem, &FEProblem::swapBackMaterials, _tid, _need_materials);

    if (_need_materials)
      _fe_problem.reinitMaterials(elem->subdomain_id(), _tid);

    for (const auto & aux : kernels)
      aux->compute();

    // update the solution vector
    {
      Threads::spin_mutex::scoped_lock lock(Threads::spin_mtx);
      for (const auto & it : _aux_sys._elem_vars[_tid])
      {
        MooseVariable * var = it.second;
        var->insert(_aux_sys.solution());
      }
    }
  }
}
开发者ID:radioactivekate,项目名称:moose,代码行数:31,代码来源:ComputeElemAuxVarsThread.C


示例17: synaptic_current_data_filled

bool synaptic_current_data_filled (address_t address, uint32_t flags)
{
  use(flags);
  
  log_info("synaptic_current_data_filled: starting");
  
  // Loop through synapse types
  for(index_t s = 0; s < SYNAPSE_TYPE_COUNT; s++)
  {
    log_info("\tCopying %u synapse type %u parameters of size %u", num_neurons, s, sizeof(synapse_param_t));
    
    // Allocate block of memory for this synapse type's pre-calculated per-neuron decay
    neuron_synapse_params[s] = (synapse_param_t*) spin1_malloc(sizeof(synapse_param_t) * num_neurons);
    
    // Check for success
    if(neuron_synapse_params[s] == NULL)
    {
      sentinel("Cannot allocate neuron synapse decay parameters - Out of DTCM");
      return false;
    }
    
    log_info("\tCopying %u bytes to %u", num_neurons * sizeof(synapse_param_t), address + ((num_neurons * s * sizeof(synapse_param_t)) / 4));
    memcpy(neuron_synapse_params[s], address + ((num_neurons * s * sizeof(synapse_param_t)) / 4),
    		num_neurons * sizeof(synapse_param_t));
  }
  
  log_info("synaptic_current_data_filled: completed successfully");
  return true;
}
开发者ID:BRML,项目名称:HBP-spinnaker-cerebellum,代码行数:29,代码来源:synapses.c


示例18: sky_importer_process_event

int sky_importer_process_event(sky_importer *importer, bstring source,
                               jsmntok_t *tokens, uint32_t *index)
{
    int rc;
    check(importer != NULL, "Importer required");
    check(source != NULL, "Source required");
    check(tokens != NULL, "Tokens required");
    check(index != NULL, "Token index required");

    jsmntok_t *event_token = &tokens[*index];
    (*index)++;

    // Open table if it hasn't been already.
    if(!importer->table->opened) {
        check(sky_table_open(importer->table) == 0, "Unable to open table");
    }

    // Create the event object.
    sky_event *event = sky_event_create(0, 0, 0); check_mem(event);
        
    // Process over child tokens.
    int32_t i;
    for(i=0; i<(event_token->size/2); i++) {
        jsmntok_t *token = &tokens[*index];
        (*index)++;
        
        if(sky_importer_tokstr_equal(source, token, "timestamp")) {
            bstring timestamp = sky_importer_token_parse_bstring(source, &tokens[(*index)++]);
            rc = sky_timestamp_parse(timestamp, &event->timestamp);
            check(rc == 0, "Unable to parse timestamp");
            bdestroy(timestamp);
        }
        else if(sky_importer_tokstr_equal(source, token, "objectId")) {
            event->object_id = (sky_object_id_t)sky_importer_token_parse_int(source, &tokens[(*index)++]);
        }
        else if(sky_importer_tokstr_equal(source, token, "action")) {
            sky_action *action = NULL;
            bstring action_name = sky_importer_token_parse_bstring(source, &tokens[(*index)++]);
            rc = sky_action_file_find_action_by_name(importer->table->action_file, action_name, &action);
            check(rc == 0, "Unable to find action: %s", bdata(action_name));
            event->action_id = action->id;
        }
        else if(sky_importer_tokstr_equal(source, token, "data")) {
            rc = sky_importer_process_event_data(importer, event, source, tokens, index);
            check(rc == 0, "Unable to import event data");
        }
        else {
            sentinel("Invalid token at char %d", tokens[*index].start);
        }
    }
    
    // Add event.
    rc = sky_table_add_event(importer->table, event);
    check(rc == 0, "Unable to add event");
    
    return 0;

error:
    return -1;
}
开发者ID:dasfaha,项目名称:sky,代码行数:60,代码来源:importer.c


示例19: while

void bounded_set<Key, Hash, bound>::clear() {
  while (first != sentinel()) {
    Pair *tmp = first;
    first = first->next;
    tmp->next = nullptr;
  }
}
开发者ID:hivert,项目名称:IVMPG,代码行数:7,代码来源:bounded_set.hpp


示例20: foreach

// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void DataContainer::ReadDataContainerStructure(hid_t dcArrayGroupId, DataContainerArrayProxy& proxy, QString h5InternalPath)
{
  QList<QString> dataContainers;
  QH5Utilities::getGroupObjects(dcArrayGroupId, H5Utilities::H5Support_GROUP, dataContainers);
  foreach(QString dataContainerName, dataContainers)
  {
    if(__SHOW_DEBUG_MSG__)
    {
      std::cout << "Data Container:" << dataContainerName.toStdString() << std::endl;
    }
    hid_t containerGid = H5Gopen(dcArrayGroupId, dataContainerName.toLatin1().constData(), H5P_DEFAULT);
    if (containerGid < 0)
    {
      continue;
    }
    HDF5ScopedGroupSentinel sentinel(&containerGid, false);
    DataContainerProxy dcProxy(dataContainerName);
    dcProxy.name = dataContainerName;
    dcProxy.flag = Qt::Checked;

    QString h5Path = h5InternalPath + "/" + dataContainerName;
    // Read the Attribute Matricies for this Data Container
    AttributeMatrix::ReadAttributeMatrixStructure(containerGid, dcProxy, h5Path);

    // Insert the DataContainerProxy proxy into the DataContainerArrayProxy
    proxy.dataContainers.insert(dcProxy.name, dcProxy);
  }
}
开发者ID:ravishivaraman,项目名称:DREAM3D,代码行数:31,代码来源:DataContainer.cpp



注:本文中的sentinel函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ sentry函数代码示例发布时间:2022-05-30
下一篇:
C++ sensors_unregister函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap