C++ sendf函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sendf函数的典型用法代码示例。如果您正苦于以下问题：C++ sendf函数的具体用法？C++ sendf怎么用？C++ sendf使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sendf函数的19个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: peer

/// Accept an incoming connection
int RASocket::open(void* )
{
    if (reactor ()->register_handler(this, ACE_Event_Handler::READ_MASK | ACE_Event_Handler::WRITE_MASK) == -1)
    {
        sLog.outError ("RASocket::open: unable to register client handler errno = %s", ACE_OS::strerror (errno));
        return -1;
    }

    ACE_INET_Addr remote_addr;

    if (peer ().get_remote_addr (remote_addr) == -1)
    {
        sLog.outError ("RASocket::open: peer ().get_remote_addr errno = %s", ACE_OS::strerror (errno));
        return -1;
    }


    sLog.out(LOG_RA, "Incoming connection from %s.",remote_addr.get_host_addr());

    ///- print Motd
    sendf(sWorld.GetMotd());
    sendf("\r\n");
    sendf(sObjectMgr.GetMangosStringForDBCLocale(LANG_RA_USER));

    return 0;
}

开发者ID:mynew4，项目名称:Core-2，代码行数:27，代码来源:RASocket.cpp

示例2: connected

static void
connected(server *s)
{
	/* Server successfully connected, send IRC init messages */

	connection_thread *ct = s->connecting;

	if ((pthread_join(ct->tid, NULL)))
		fatal("pthread_join");

	if (*ct->ipstr)
		newlinef(s->channel, 0, "--", "Connected to [%s]", ct->ipstr);
	else
		newlinef(s->channel, 0, "--", "Error determining server IP: %s", ct->error);

	s->soc = ct->socket;

	/* Set reconnect parameters to 0 in case this was an auto-reconnect */
	s->reconnect_time = 0;
	s->reconnect_delta = 0;

	s->latency_time = time(NULL);
	s->latency_delta = 0;

	sendf(NULL, s, "NICK %s", s->nick);
	sendf(NULL, s, "USER %s 8 * :%s", config.username, config.realname);

	//FIXME: should the server send nick as is? compare the nick when it's received?
	//or should auto_nick take a server argument and write to a buffer of NICKSIZE length?
}

开发者ID:loudambiance，项目名称:rirc，代码行数:30，代码来源:net.c

示例3: take_obj_list

void take_obj_list(struct char_data *ch,struct obj_data *o,int *amount,struct char_data *give_to)
{
  char buf[MAX_STRING_LENGTH];

  if (*amount<=0 && !o) return;
  if (o->contains)
    take_obj_list(ch,o->contains,amount,give_to);
  else if (o->next_content)
    take_obj_list(ch,o->next_content,amount,give_to);
  else {
    if (o->carried_by)
      obj_from_char(o);
    if (o->in_obj)
      obj_from_obj(o);
    *amount -= o->obj_flags.cost;
    sendf(ch,"Your %s is taken.\n",o->short_description);
    if (give_to)
      sendf(give_to,"You take his %s.\n",o->short_description);
    if (give_to) {
      sprintf(buf,"FINE: %d take from %s",o->virtual,GET_NAME(ch));
      slog(buf);
      obj_to_char(o,give_to);
      o->held_for=mystrdup(GET_NAME(ch));
    } else {
      sprintf(buf,"LINK: %d take from %s",o->virtual,GET_NAME(ch));
      slog(buf);
      extract_obj(o);
    }
  }

开发者ID:prealms1993，项目名称:PerilousRealms1993，代码行数:29，代码来源:reception.c

示例4: cmd_script

unsigned int cmd_script(callbackp *callbacki)
{
	char *domain = CONFIG_VAL(Server, domain, callbacki->g_ape->srv);
	char *script = NULL;
	int alloc = 0;
	APE_PARAMS_INIT();
	
	if (domain == NULL) {
		send_error(callbacki->call_user, "NO_DOMAIN", "201", callbacki->g_ape);
	} else {
		char *autodom;
		if (strcmp(domain, "auto") == 0 && (autodom = JSTR(domain)) != NULL) {
			domain = autodom;
			#if 0
			/* http://geekandpoke.typepad.com/.a/6a00d8341d3df553ef0120a6d65b8a970b-pi */
			
			struct _http_header_line *hlines;

			for (hlines = callbacki->client->http.hlines; hlines != NULL; hlines = hlines->next) {
				if (strcasecmp(hlines->key.val, "host") == 0) {
					char *loc;
					char *newdom = xmalloc(sizeof(char) * (hlines->value.len + 1));
					memset(newdom, '\0', hlines->value.len + 1);
					if ((loc = strrchr(hlines->value.val, '.')) != NULL) {
						int i, pos = 0;

						for (i = 0; i < hlines->value.len; i++, pos++) {
							newdom[pos] = hlines->value.val[i];
							if (newdom[pos] == ':') {
								newdom[pos] = '\0';
								break;
							}
							if (hlines->value.val[i] == '.' && &hlines->value.val[i] < loc) {
								pos = -1;
							}
						}
						newdom[pos] = '\0';
						domain = newdom;
						alloc = 1;
					}
				}
			}
			#endif		
		}
		sendf(callbacki->client->fd, callbacki->g_ape, "%s<html>\n<head>\n\t<script>\n\t\tdocument.domain=\"%s\"\n\t</script>\n", HEADER_DEFAULT, domain);
		
		if (alloc) {
			free(domain);
		}
		
		JFOREACH(scripts, script) {
			sendf(callbacki->client->fd, callbacki->g_ape, "\t<script type=\"text/javascript\" src=\"%s\"></script>\n", script);
		}
		sendbin(callbacki->client->fd, "</head>\n<body>\n</body>\n</html>", 30, 0, callbacki->g_ape);
	}

开发者ID:creativeprogramming，项目名称:APE_Server，代码行数:55，代码来源:cmd.c

示例5: get_file

/* Send one file. */
static void get_file(int s, char *url)
{
	/* Set www_dir to point to your web directory. */
	char *www_dir = NULL;
	char bufo[512];
	int n, w;

	const char *mime = NULL;
	const char *p = url + 1;

	if (*p == 0)
		p = "index.html";

	char *p2 = strrchr(p, '.');
	if (p2) {
		p2++;
		if (!strcmp(p2, "html")) mime = "text/html";
		else if (!strcmp(p2, "htm")) mime = "text/html";
		else if (!strcmp(p2, "css")) mime = "text/css";
		else if (!strcmp(p2, "txt")) mime = "text/plain";
		else if (!strcmp(p2, "png")) mime = "image/png";
		else if (!strcmp(p2, "jpg")) mime = "image/jpg";
		else if (!strcmp(p2, "class")) mime = "application/x-java-applet";
		else if (!strcmp(p2, "jar")) mime = "application/java-archive";
		else if (!strcmp(p2, "pdf")) mime = "application/pdf";
		else if (!strcmp(p2, "swf")) mime = "application/x-shockwave-flash";
		else if (!strcmp(p2, "ico")) mime = "image/vnd.microsoft.icon";
		else if (!strcmp(p2, "js")) mime = "text/javascript";
	}

	www_dir = getenv("www_dir");

	snprintf(bufo, sizeof(bufo), "%s/%s", www_dir, p);
	FILE *f = fopen(bufo, "rb");

	if (!f) {
		sendf(s, "HTTP/1.0 404 NOK\r\n\r\n");
		return;
	}

	sendf(s, "HTTP/1.0 200 OK\r\n");
	if (mime)
		sendf(s, "Content-Type: %s\r\n\r\n", mime);
	else
		sendf(s, "\r\n");

	while ((n = fread(bufo, 1, sizeof(bufo), f)) > 0)
		if ((w = mysend(s, bufo, n)) < 0)
			break;
	fclose(f);
}

开发者ID:bogdanPricope，项目名称:ofp，代码行数:52，代码来源:httpd.c

示例6: cmd_script

unsigned int cmd_script(callbackp *callbacki)
{
	char *domain = CONFIG_VAL(Server, domain, callbacki->g_ape->srv);
	if (domain == NULL) {
		send_error(callbacki->call_user, "NO_DOMAIN", "201", callbacki->g_ape);
	} else {
		int i;
		sendf(callbacki->fdclient, callbacki->g_ape, "%s<html>\n<head>\n\t<script>\n\t\tdocument.domain=\"%s\"\n\t</script>\n", HEADER, domain);
		for (i = 1; i <= callbacki->nParam; i++) {
			sendf(callbacki->fdclient, callbacki->g_ape, "\t<script type=\"text/javascript\" src=\"%s\"></script>\n", callbacki->param[i]);
		}
		sendbin(callbacki->fdclient, "</head>\n<body>\n</body>\n</html>", 30, callbacki->g_ape);
	}
	return (FOR_NOTHING);
}

开发者ID:CrypticSwarm，项目名称:APE_Server，代码行数:15，代码来源:cmd.c

示例7: forwardsegToSRT

//SNP process uses this function to send a sendseg_arg_t structure which contains a segment and its src node ID to the SRT process.
//Parameter tran_conn is the TCP descriptor of the connection between the SRT process and the SNP process. 
//Return 1 if a sendseg_arg_t is succefully sent, otherwise return -1.
int forwardsegToSRT(int tran_conn, int src_nodeID, seg_t* segPtr)
{
	sendseg_arg_t a;
	a.nodeID = src_nodeID;
	memcpy(&a.seg, segPtr, sizeof(seg_t));
	return sendf(&a, tran_conn);
}

开发者ID:yangxk15，项目名称:Computer-Networks，代码行数:10，代码来源:seg.c

示例8: snp_sendseg

//SRT process uses this function to send a segment and its destination node ID in a sendseg_arg_t structure to SNP process to send out. 
//Parameter network_conn is the TCP descriptor of the connection between the SRT process and the SNP process. 
//Return 1 if a sendseg_arg_t is succefully sent, otherwise return -1.
int snp_sendseg(int network_conn, int dest_nodeID, seg_t* segPtr)
{
	sendseg_arg_t a;
	a.nodeID = dest_nodeID;
	memcpy(&a.seg, segPtr, sizeof(seg_t));
	return sendf(&a, network_conn);
}

开发者ID:yangxk15，项目名称:Computer-Networks，代码行数:10，代码来源:seg.c

示例9: command_debug_ping

void
command_debug_ping(uint32_t *args)
{
    uint8_t len = args[0];
    char *data = (void*)(size_t)args[1];
    sendf("pong data=%*s", len, data);
}

开发者ID:N7QWT，项目名称:klipper，代码行数:7，代码来源:debugcmds.c

示例10: command_debug_read8

void
command_debug_read8(uint32_t *args)
{
    uint8_t *ptr = (void*)(size_t)args[0];
    uint16_t v = *ptr;
    sendf("debug_result val=%hu", v);
}

开发者ID:N7QWT，项目名称:klipper，代码行数:7，代码来源:debugcmds.c

示例11: PyErr_SetString

static PyObject *sendAuthChallenge(PyObject *self, PyObject *args)
{
	//cn, domain, reqid, publicKey
	//return answer to challenge
	int cn;
	char *domain;
	uint id;
	char *publicKey;
	server::clientinfo *ci;
	if(!PyArg_ParseTuple(args, "isIs", &cn, &domain, &id, &publicKey))
		return 0;
	ci = server::getinfo(cn);
	if(!ci)
	{
		PyErr_SetString(PyExc_ValueError, "Invalid cn specified");
		return 0;
	}

    uint seed[3] = { randomMT(), randomMT(), randomMT() };
    vector<char> challengeBuf;
    vector<char> answerBuf;
    void *parsedKey = parsepubkey(publicKey);
    genchallengestr(parsedKey, seed, sizeof(seed), challengeBuf, answerBuf);

    freepubkey(parsedKey);
    sendf(ci->clientnum, 1, "risis", N_AUTHCHAL, domain, id, challengeBuf.getbuf());

    return Py_BuildValue("s", answerBuf.getbuf());
}

开发者ID:MorganBorman，项目名称:cxsbs，代码行数:29，代码来源:servermodule.cpp

示例12: basic_auth

int basic_auth (SOCKET s )
{
    char *cred, *user = relay_user, *pass= relay_pass;
    int len, ret;
    char * userpass= NULL;
    if (user == NULL)
    {
        g_error("Cannot decide username for proxy authentication.(%s,%d)",__FILE__, __LINE__);
        return -1;        
    }

    if (pass == NULL)
    {
        g_error("Can not decide password for proxy authentication.(%s,%d)", __FILE__, __LINE__);
    }
    //    if ((pass = determine_relay_password ()) == NULL &&
    //       (pass = readpass("Enter proxy authentication password for %[email protected]%s: ",
    //relay_user, relay_host)) == NULL)
    //  g_error("Cannot decide password for proxy authentication.");
    
    len = strlen(user)+strlen(pass)+1;
    userpass = xmalloc(len+1);
    snprintf(userpass, len+1, "%s:%s", user, pass);
    //memset (pass, 0, strlen(pass));
    cred = make_base64_string(userpass);
    memset (userpass, 0, len);

    ret = sendf(s, "Proxy-Authorization: Basic %s\r\n", cred);
    
    memset(cred, 0, strlen(cred));
    free(cred);

    return ret;
}

开发者ID:4179e1，项目名称:gtkqq，代码行数:34，代码来源:qqproxy.c

示例13: check_latency

static int
check_latency(server *s, time_t t)
{
	/* Check time since last message */

	time_t delta;

	if (s->soc < 0)
		return 0;

	delta = t - s->latency_time;

	/* Server has timed out */
	if (delta > SERVER_TIMEOUT_S) {
		server_disconnect(s, 1, 0, "Ping timeout (" STR(SERVER_TIMEOUT_S) ")");
		return 1;
	}

	/* Server might be timing out, attempt to PING */
	if (delta > SERVER_LATENCY_PING_S && !s->pinging) {
		sendf(NULL, s, "PING :%s", s->host);
		s->pinging = 1;
	}

	/* Server hasn't responded to PING, display latency in status */
	if (delta > SERVER_LATENCY_S && ccur->server == s) {
		s->latency_delta = delta;
		draw(D_STATUS);
	}

	return 0;
}

开发者ID:loudambiance，项目名称:rirc，代码行数:32，代码来源:net.c

示例14: command_debug_read16

void
command_debug_read16(uint32_t *args)
{
    uint16_t *ptr = (void*)(size_t)args[0];
    irqstatus_t flag = irq_save();
    uint16_t v = *ptr;
    irq_restore(flag);
    sendf("debug_result val=%hu", v);
}

开发者ID:N7QWT，项目名称:klipper，代码行数:9，代码来源:debugcmds.c

示例15: zappy_connect_nbr

int		zappy_connect_nbr(t_fds *c, char *_)
{
  t_player	*p;

  (void)_;
  if (!c || !(p = *(t_player**)c) || !p->team)
    return (false);
  sendf(c, "%d", p->team->max_conn);
  return (true);
}

开发者ID:Nwazette，项目名称:Zappy，代码行数:10，代码来源:connect_nbr.c

示例16: command_spi_transfer

void
command_spi_transfer(uint32_t *args)
{
    uint8_t oid = args[0];
    struct spidev_s *spi = oid_lookup(oid, command_config_spi);
    uint8_t data_len = args[1];
    uint8_t *data = (void*)(size_t)args[2];
    spidev_transfer(spi, 1, data_len, data);
    sendf("spi_transfer_response oid=%c response=%*s", oid, data_len, data);
}

开发者ID:KevinOConnor，项目名称:klipper，代码行数:10，代码来源:spicmds.c

示例17: command_stepper_get_position

// Report the current position of the stepper
void
command_stepper_get_position(uint32_t *args)
{
    uint8_t oid = args[0];
    struct stepper *s = stepper_oid_lookup(oid);
    irq_disable();
    uint32_t position = stepper_get_position(s);
    irq_enable();
    sendf("stepper_position oid=%c pos=%i", oid, position - POSITION_BIAS);
}

开发者ID:KevinOConnor，项目名称:klipper，代码行数:11，代码来源:stepper.c

示例18: sports_cast

void sports_cast(char * fmt, ...) {
  va_list args;
  char s[MAX_STRING_LENGTH];
  struct connection_data *i;

  va_start(args, fmt);
  vsprintf(s, fmt, args);
  va_end(args);
  for (i = connection_list; i ; i = i->next)
    if(!i->connected && !IS_SET(i->character->specials.act, PLR_NOSPORTS))
      sendf(i->character,"SPORTS NEWS: %s\n",s);
}

开发者ID:prealms1993，项目名称:PerilousRealms1993，代码行数:12，代码来源:nlog.c

示例19: ok_to_use

bool
ok_to_use(CHAR_DATA *ch, const struct lookup_type *table, int value)
{
    int minlev = level_table_lookup(table, value);

    if (minlev > get_trust(ch)) {
        sendf(ch, "You must be level %d to use this value.\n\r", minlev);
        return FALSE;
    }

    return TRUE;
}

开发者ID:bramblevine，项目名称:adesa，代码行数:12，代码来源:macros.c

注：本文中的sendf函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sendfile函数代码示例发布时间：2022-05-30

C++ senddata函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19155|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8632|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8615|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7530|2022-11-06

客服电话

电子邮件

C++ sendf函数代码示例

示例1: peer

示例2: connected

示例3: take_obj_list

示例4: cmd_script

示例5: get_file

示例6: cmd_script

示例7: forwardsegToSRT

示例8: snp_sendseg

示例9: command_debug_ping

示例10: command_debug_read8

示例11: PyErr_SetString

示例12: basic_auth

示例13: check_latency

示例14: command_debug_read16

示例15: zappy_connect_nbr

示例16: command_spi_transfer

示例17: command_stepper_get_position

示例18: sports_cast

示例19: ok_to_use

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-30791

solegalli/feature-selection-for-machine-

nvim-lualine/lualine.nvim: A blazing fas

kentcdodds/dom-testing-library-with-anyt

win7系统重装系统初始设置的操作方法

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053