C++ sd_ble_gap_disconnect函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sd_ble_gap_disconnect函数的典型用法代码示例。如果您正苦于以下问题：C++ sd_ble_gap_disconnect函数的具体用法？C++ sd_ble_gap_disconnect怎么用？C++ sd_ble_gap_disconnect使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sd_ble_gap_disconnect函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: on_ble_evt

/**@brief Function for the Application's S110 SoftDevice event handler.
 *
 * @param[in] p_ble_evt S110 SoftDevice event.
 */
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
    uint32_t err_code;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            nrf_gpio_pin_set(CONNECTED_LED_PIN_NO);
            nrf_gpio_pin_clear(ADVERTISING_LED_PIN_NO);

            m_conn_handle    = p_ble_evt->evt.gap_evt.conn_handle;
            m_is_advertising = false;
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            nrf_gpio_pin_clear(CONNECTED_LED_PIN_NO);

            if (!m_tear_down_in_progress)
            {
                // The Disconnected event is because of an external event. (Link loss or
                // disconnect triggered by the DFU Controller before the firmware update was
                // complete).
                // Restart advertising so that the DFU Controller can reconnect if possible.
                advertising_start();
            }

            m_conn_handle = BLE_CONN_HANDLE_INVALID;

            break;

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
                                                   BLE_GAP_SEC_STATUS_SUCCESS,
                                                   &m_sec_params);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            if (p_ble_evt->evt.gatts_evt.params.timeout.src == BLE_GATT_TIMEOUT_SRC_PROTOCOL)
            {
                err_code = sd_ble_gap_disconnect(m_conn_handle,
                                                 BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BLE_GATTS_EVT_SYS_ATTR_MISSING:
            err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}

开发者ID:AveryLouie，项目名称:flashware，代码行数:60，代码来源:dfu_transport_ble.c

示例2: on_conn_params_evt

/**@brief Function for handling the Connection Parameters Module.
 *
 * @details This function will be called for all events in the Connection Parameters Module which
 *          are passed to the application.
 *          @note All this function does is to disconnect. This could have been done by simply
 *                setting the disconnect_on_fail config parameter, but instead we use the event
 *                handler mechanism to demonstrate its use.
 *
 * @param[in] p_evt  Event received from the Connection Parameters Module.
 */
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
    ret_code_t err_code;

    if (p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
    {
        err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
        APP_ERROR_CHECK(err_code);
    }
}

开发者ID:NordicSemiconductor，项目名称:nrf5-ble-tutorial-characteristic，代码行数:20，代码来源:main.c

示例3: ble_device_disconnect

void ble_device_disconnect( void )
{
  uint32_t err_code;

  if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
  {
      err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
      APP_ERROR_CHECK(err_code);
  }
}

开发者ID:JUMA-IO，项目名称:nRF51_Platform，代码行数:10，代码来源:device_main.c

示例4: sd_ble_gap_disconnect

void BLETransceiver::onConnParamsEvt(ble_conn_params_evt_t * p_evt)
{
	uint32_t err_code;

	if(p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
	{
		err_code = sd_ble_gap_disconnect(u16_connHandle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
		APP_ERROR_CHECK(err_code);
	}
}

开发者ID:Lahorde，项目名称:nrf51_template_application，代码行数:10，代码来源:ble_transceiver.cpp

示例5: on_conn_params_evt

/**@brief Function for handling the Connection Parameters Module.
 *
 * @details This function will be called for all events in the Connection Parameters Module which
 *          are passed to the application.
 *          @note All this function does is to disconnect. This could have been done by simply
 *                setting the disconnect_on_fail config parameter, but instead we use the event
 *                handler mechanism to demonstrate its use.
 *
 * @param[in]   p_evt   Event received from the Connection Parameters Module.
 */
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
    uint32_t err_code; // Variable used to check for any errors returned by functions

    if(p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
    {
        err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
        APP_ERROR_CHECK(err_code);// Check for errors
    }
}

开发者ID:ClarePhang，项目名称:nrf51-ble-tutorial-advertising，代码行数:20，代码来源:main.c

示例6: bsp_event_handler

/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated when button is pressed.
 */
static void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;
    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_KEY_0:
            if (m_is_ias_present)
            {
                if (!m_is_high_alert_signalled)
                {
                    err_code = ble_ias_c_send_alert_level(&m_ias_c, BLE_CHAR_ALERT_LEVEL_HIGH_ALERT);
                }
                else
                {
                    err_code = ble_ias_c_send_alert_level(&m_ias_c, BLE_CHAR_ALERT_LEVEL_NO_ALERT);
                }

                if (err_code == NRF_SUCCESS)
                {
                    m_is_high_alert_signalled = !m_is_high_alert_signalled;
                }
                else if (
                    (err_code != BLE_ERROR_NO_TX_PACKETS)
                    &&
                    (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
                    &&
                    (err_code != NRF_ERROR_NOT_FOUND)
                    )
                {
                    APP_ERROR_HANDLER(err_code);
                }
            }
            break;

        case BSP_EVENT_KEY_1: //STOP_ALERTING_BUTTON_ID
            err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            break;
    }
}

开发者ID:JulianYG，项目名称:WNR，代码行数:59，代码来源:main.c

示例7: on_ble_evt

/**@brief Function for handling the Application's BLE Stack events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 */
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
    uint32_t        err_code;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            nrf_gpio_pin_set(LED_CONNECTED);

            g_UartServ.conn_handle  = p_ble_evt->evt.gap_evt.conn_handle;
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            nrf_gpio_pin_clear(LED_CONNECTED);
            g_UartServ.conn_handle = BLE_CONN_HANDLE_INVALID;

            advertising_start();

            // Go to system-off mode, should not return from this function, wakeup will trigger
            // a reset.
            //system_off_mode_enter();
            break;

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            //err_code = sd_ble_gap_sec_params_reply(g_UartServ.conn_handle,
            //                                       BLE_GAP_SEC_STATUS_SUCCESS,
            //                                       &g_GAPSecParams);
            //APP_ERROR_CHECK(err_code);
            break;

        case BLE_GAP_EVT_TIMEOUT:
            if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISING)
            {
            	nrf_gpio_pin_set(LED_CONNECTED);

                    // Go to system-off mode.
                    // (this function will not return; wakeup will cause a reset).
                    err_code = sd_power_system_off();
                    APP_ERROR_CHECK(err_code);
            }
            break;

        case BLE_GATTC_EVT_TIMEOUT:
        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server and Client timeout events.
            err_code = sd_ble_gap_disconnect(g_UartServ.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}

开发者ID:iotbees，项目名称:EHAL，代码行数:59，代码来源:UartBleMain.c

示例8: on_ble_evt

/**@brief Function for handling BLE Stack events.
 *
 * @param[in] p_ble_evt  Bluetooth stack event.
 */
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
    uint32_t              err_code;
    ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_ADV_REPORT:
            on_ble_gap_evt_adv_report(p_gap_evt);
            break;

        case BLE_GAP_EVT_CONNECTED:
            on_ble_gap_evt_connected(p_gap_evt);
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            on_ble_gap_evt_disconnected(p_gap_evt);
            break;

        case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
        {
            // Accept parameters requested by the peer.
            ble_gap_conn_params_t params;
            params = p_gap_evt->params.conn_param_update_request.conn_params;
            params.max_conn_interval = params.min_conn_interval;
            err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle, &params);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTS_EVT_SYS_ATTR_MISSING:
        {
            err_code = sd_ble_gatts_sys_attr_set(p_gap_evt->conn_handle, NULL, 0, 0);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTC_EVT_TIMEOUT: // Fallthrough.
        case BLE_GATTS_EVT_TIMEOUT:
        {
            NRF_LOG_DEBUG("GATT timeout, disconnecting.\r\n");
            err_code = sd_ble_gap_disconnect(m_conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_EVT_USER_MEM_REQUEST:
        {
            err_code = sd_ble_user_mem_reply(p_ble_evt->evt.common_evt.conn_handle, NULL);
            APP_ERROR_CHECK(err_code);
        } break;

        default:
            // No implementation needed.
            break;
    }
}

开发者ID:AaltoNEPPI，项目名称:nRF52_dev，代码行数:59，代码来源:main.c

示例9: flash_callback

void flash_callback(fs_evt_t const * const evt, fs_ret_t result)
{
    if (result == FS_SUCCESS)
    {
        NRF_LOG_INFO("Obtained settings, enter dfu is %d\n", s_dfu_settings.enter_buttonless_dfu);

        (void)sd_ble_gap_disconnect(p_m_dfu->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);

        p_m_dfu->is_waiting_for_disconnection = true;
    }
}

开发者ID:AaltoNEPPI，项目名称:nRF52_dev，代码行数:11，代码来源:ble_dfu.c

示例10: jswrap_nrf_bluetooth_sleep

/*JSON{
    "type" : "staticmethod",
    "class" : "NRF",
    "name" : "sleep",
    "generate" : "jswrap_nrf_bluetooth_sleep"
}*/
void jswrap_nrf_bluetooth_sleep(void) {
    uint32_t err_code;

    // If connected, disconnect.
    if (m_conn_handle != BLE_CONN_HANDLE_INVALID) {
        err_code = sd_ble_gap_disconnect(m_conn_handle,  BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
    }

    // Stop advertising
    err_code = sd_ble_gap_adv_stop();
    NRF_RADIO->TASKS_DISABLE = (1UL);
}

开发者ID:niklauslee，项目名称:Espruino，代码行数:18，代码来源:jswrap_bluetooth.c

示例11: bsp_event_handler

/**@brief Function for handling events from the BSP module.
 *
 * @param[in] event  Event generated by button press.
 */
static void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;

    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;//BSP_EVENT_SLEEP

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_ans_c.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;//BSP_EVENT_DISCONNECT

        case BSP_EVENT_WHITELIST_OFF:
            err_code = ble_advertising_restart_without_whitelist();
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;//BSP_EVENT_WHITELIST_OFF

        case BSP_EVENT_KEY_0:
            if (m_ans_c.conn_handle != BLE_CONN_HANDLE_INVALID)
            {
                new_alert_state_toggle();
            }
            break;//BSP_EVENT_KEY_0

        case BSP_EVENT_KEY_1:
            if (m_ans_c.conn_handle != BLE_CONN_HANDLE_INVALID)
            {
                unread_alert_state_toggle();
            }
            break;//BSP_EVENT_KEY_1

        case BSP_EVENT_KEY_2:
            if (m_ans_c.conn_handle != BLE_CONN_HANDLE_INVALID)
            {
                all_alert_notify_request();
            }
            break;//BSP_EVENT_KEY_2

        default:
            // No implementation needed.
            break;
    }
}

开发者ID:IOIOI，项目名称:nRF51，代码行数:57，代码来源:main.c

示例12: on_ble_evt

/**@brief Function for handling the application's BLE stack events.
 *
 * @param[in] p_ble_evt  Bluetooth stack event.
 */
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
    uint32_t err_code = NRF_SUCCESS;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            printf("@Connected\n\r");
            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);

            err_code = app_timer_start(m_sec_ping, PING_DELAY, &m_notification_latest);
            APP_ERROR_CHECK(err_code);
				
				    // BSP_LED_0_MASK  BSP_LED_1_MASK BSP_LED_2_MASK
            LEDS_ON(BSP_LED_1_MASK);

            m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            printf("@Disconnected\n\r");
            m_conn_handle = BLE_CONN_HANDLE_INVALID;
				
				    // BSP_LED_0_MASK  BSP_LED_1_MASK BSP_LED_2_MASK
            LEDS_OFF(BSP_LED_1_MASK);
        
            err_code = app_timer_stop(m_sec_ping);
            APP_ERROR_CHECK(err_code);
        
            while (1) {
              nrf_delay_ms(200);
              LEDS_INVERT(BSP_LED_1_MASK);
            }

            break;

        case BLE_GATTC_EVT_TIMEOUT:
        case BLE_GATTS_EVT_TIMEOUT:
            LOG("Timeout.\n\r");
            // Disconnect on GATT Server and Client time-out events.
            err_code = sd_ble_gap_disconnect(m_conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
    APP_ERROR_CHECK(err_code);
}

开发者ID:mcanos，项目名称:nRF51，代码行数:56，代码来源:main.c

示例13: update_timeout_handler

static void update_timeout_handler(void * p_context)
{
    UNUSED_PARAMETER(p_context);

#else /* #if !USE_APP_TIMER */
static void update_timeout_handler(void)
{
    m_conn_params_timer.detach(); /* this is supposed to be a single-shot timer callback */
#endif /* #if !USE_APP_TIMER */
    if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
    {
        // Check if we have reached the maximum number of attempts
        m_update_count++;
        if (m_update_count <= m_conn_params_config.max_conn_params_update_count)
        {
            uint32_t err_code;

            // Parameters are not ok, send connection parameters update request.
            err_code = sd_ble_gap_conn_param_update(m_conn_handle, &m_preferred_conn_params);
            if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL))
            {
                m_conn_params_config.error_handler(err_code);
            }
        }
        else
        {
            m_update_count = 0;

            // Negotiation failed, disconnect automatically if this has been configured
            if (m_conn_params_config.disconnect_on_fail)
            {
                uint32_t err_code;

                err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
                if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL))
                {
                    m_conn_params_config.error_handler(err_code);
                }
            }

            // Notify the application that the procedure has failed
            if (m_conn_params_config.evt_handler != NULL)
            {
                ble_conn_params_evt_t evt;

                evt.evt_type = BLE_CONN_PARAMS_EVT_FAILED;
                m_conn_params_config.evt_handler(&evt);
            }
        }
    }
}

开发者ID:0xc0170，项目名称:mbed，代码行数:51，代码来源:ble_conn_params.cpp

示例14: on_ble_evt

/**@brief Function for handling the Application's BLE Stack events.
 *
 * @param[in] p_ble_evt  Bluetooth stack event.
 */
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
    uint32_t        err_code      = NRF_SUCCESS;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);
            
            m_advertising_mode = BLE_NO_ADV;
            m_conn_handle      = p_ble_evt->evt.gap_evt.conn_handle;
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            err_code = bsp_indication_set(BSP_INDICATE_IDLE);
            APP_ERROR_CHECK(err_code);

            m_conn_handle = BLE_CONN_HANDLE_INVALID;

            advertising_start();
            break;

        case BLE_GAP_EVT_TIMEOUT:
            if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISING)
            {
                if (m_advertising_mode == BLE_SLEEP)
                {
                    sleep_mode_enter();
                }
                else
                {
                    advertising_start();
                }
            }
            break;

        case BLE_GATTC_EVT_TIMEOUT:
        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server and Client timeout events.
            err_code = sd_ble_gap_disconnect(m_conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}

开发者ID:RobinLin，项目名称:Espruino，代码行数:54，代码来源:main.c

示例15: notif_timeout_handler

/**@brief Function for handling the Notification timeout.
 *
 * @details This function will be called when the notification timer expires. This will stop the
 *          timer for connection interval and disconnect from the peer.
 *
 * @param[in]   p_context   Pointer used for passing some arbitrary information (context) from the
 *                          app_start_timer() call to the timeout handler.
 */
static void notif_timeout_handler(void * p_context)
{
    uint32_t err_code;
    
    UNUSED_PARAMETER(p_context);

    // Stop all notifications (by stopping the timer for connection interval that triggers 
    // notifications and disconnecting from peer).
    err_code = app_timer_stop(m_conn_int_timer_id); 
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
    APP_ERROR_CHECK(err_code);
}

开发者ID:tkadom，项目名称:TWBLE，代码行数:22，代码来源:main.c

示例16: dfu_cb_handler

/**@brief     Function for handling the callback events from the dfu module.
 *            Callbacks are expected when \ref dfu_data_pkt_handle has been executed.
 *
 * @param[in] packet    Packet type for which this callback is related.
 * @param[in] result    Operation result code. NRF_SUCCESS when a queued operation was successful.
 * @param[in] p_data    Pointer to the data to which the operation is related.
 */
static void dfu_cb_handler(uint32_t packet, uint32_t result, uint8_t * p_data)
{
    switch (packet)
    {
        ble_dfu_resp_val_t resp_val;
        uint32_t           err_code;

        case DATA_PACKET:
            if (result != NRF_SUCCESS)
            {
                // Disconnect from peer.
                if (IS_CONNECTED())
                {
                    err_code = sd_ble_gap_disconnect(m_conn_handle,
                                                     BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
                    APP_ERROR_CHECK(err_code);
                }
            }
            else
            {
                err_code = hci_mem_pool_rx_consume(p_data);
                APP_ERROR_CHECK(err_code);

                // If the callback matches final data packet received then the peer is notified.
                if (mp_final_packet == p_data)
                {
                    // Notify the DFU Controller about the success of the procedure.
                    err_code = ble_dfu_response_send(&m_dfu,
                                                     BLE_DFU_RECEIVE_APP_PROCEDURE,
                                                     BLE_DFU_RESP_VAL_SUCCESS);
                    APP_ERROR_CHECK(err_code);
                }
            }
            break;

        case START_PACKET:
            // Translate the err_code returned by the above function to DFU Response Value.
            resp_val = nrf_err_code_translate(result, BLE_DFU_START_PROCEDURE);

            err_code = ble_dfu_response_send(&m_dfu,
                                             BLE_DFU_START_PROCEDURE,
                                             resp_val);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // ignore.
            break;
    }
}

开发者ID:foldedtoad，项目名称:eddystone，代码行数:57，代码来源:dfu_transport_ble.c

示例17: dfu_reset_prepare

void dfu_reset_prepare(void)
{
  uint32_t err_code;
  
  if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
  {
      err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
      APP_ERROR_CHECK(err_code);
  }
  else
  {
      err_code = sd_ble_gap_adv_stop();
      APP_ERROR_CHECK(err_code);
  }
}

开发者ID:JUMA-IO，项目名称:nRF51_Platform，代码行数:15，代码来源:device_main.c

示例18: on_conn_params_evt

/**@brief Function for handling the Connection Parameters Module.
 *
 * @details This function will be called for all events in the Connection Parameters Module which
 *          are passed to the application.
 *          @note All this function does is to disconnect. This could have been done by simply
 *                setting the disconnect_on_fail config parameter, but instead we use the event
 *                handler mechanism to demonstrate its use.
 *
 * @param[in]   p_evt   Event received from the Connection Parameters Module.
 */
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
    uint32_t err_code;

    if(p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
    {
        err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
        if (err_code == NRF_SUCCESS)
					debug_printf("BLE_CONN_PARAMS_EVT_FAILED, disconnecting!\r\n");
				else
				{
					debug_printf("Tried to disconnect after BLE_CONN_PARAMS_EVT_FAILED but there was an error!\r\n");
					APP_ERROR_CHECK(err_code);
				}
    }
}

开发者ID:stelios26，项目名称:Aphrodite，代码行数:26，代码来源:main.c

示例19: on_conn_params_evt

/**@brief Connection Parameters Module handler.
 *
 * @details This function will be called for all events in the Connection Parameters Module which
 *          are passed to the application.
 *          @note All this function does is to disconnect. This could have been done by simply
 *                setting the disconnect_on_fail config parameter, but instead we use the event
 *                handler mechanism to demonstrate its use.
 *
 * @param[in]   p_evt   Event received from the Connection Parameters Module.
 */
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
    uint32_t err_code;
    
    switch (p_evt->evt_type)
    {
        case BLE_CONN_PARAMS_EVT_FAILED:
            err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
            APP_ERROR_CHECK(err_code);
            break;
            
        default:
            // No implementation needed.
            break;
    }
}

开发者ID:DroneBucket，项目名称:Drone_Bucket_CrazyFlie2_NRF_Firmware，代码行数:26，代码来源:main.c

示例20: on_ble_evt

/**@brief Function for handling the Application's BLE Stack events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 */
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
    uint32_t        err_code = NRF_SUCCESS;
    static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID;
    
    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            led_stop();
            err_code = app_button_enable();
            m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
            break;
            
        case BLE_GAP_EVT_DISCONNECTED:
            m_conn_handle = BLE_CONN_HANDLE_INVALID;
            
            // Stop detecting button presses when not connected.
            err_code = app_button_disable();
            APP_ERROR_CHECK(err_code);
            
            err_code = ble_ams_c_service_store();
            APP_ERROR_CHECK(err_code);
            
            advertising_start();
            break;
            
        case BLE_GAP_EVT_TIMEOUT:
            if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT)
            {
                advertising_start();
            }
            break;
            
        case BLE_GATTC_EVT_TIMEOUT:
        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server and Client timeout events.
            err_code = sd_ble_gap_disconnect(m_conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;
            
        default:
            // No implementation needed.
            break;
    }
    APP_ERROR_CHECK(err_code);
}

开发者ID:KhaosT，项目名称:AMS-Reference，代码行数:51，代码来源:main.c

注：本文中的sd_ble_gap_disconnect函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sd_ble_gap_ppcp_set函数代码示例发布时间：2022-05-30

C++ sd_ble_gap_appearance_set函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19159|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ sd_ble_gap_disconnect函数代码示例

示例1: on_ble_evt

示例2: on_conn_params_evt

示例3: ble_device_disconnect

示例4: sd_ble_gap_disconnect

示例5: on_conn_params_evt

示例6: bsp_event_handler

示例7: on_ble_evt

示例8: on_ble_evt

示例9: flash_callback

示例10: jswrap_nrf_bluetooth_sleep

示例11: bsp_event_handler

示例12: on_ble_evt

示例13: update_timeout_handler

示例14: on_ble_evt

示例15: notif_timeout_handler

示例16: dfu_cb_handler

示例17: dfu_reset_prepare

示例18: on_conn_params_evt

示例19: on_conn_params_evt

示例20: on_ble_evt

请发表评论

全部评论

上一篇：

下一篇：

kojino/Harvard-Robust-Machine-Learning:

cescoffier/puppet-nexus: A Puppet Module

文的笔顺,诠释文的笔画,解读文的部首

abos3d/CleanArchitectKotlinFlowHiltSimpl

Cassolotl/sentient.cloud · GitHub

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053