C++ scsi_host_alloc函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中scsi_host_alloc函数的典型用法代码示例。如果您正苦于以下问题：C++ scsi_host_alloc函数的具体用法？C++ scsi_host_alloc怎么用？C++ scsi_host_alloc使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了scsi_host_alloc函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: zfcp_scsi_adapter_register

/**
 * zfcp_scsi_adapter_register - Register SCSI and FC host with SCSI midlayer
 * @adapter: The zfcp adapter to register with the SCSI midlayer
 */
int zfcp_scsi_adapter_register(struct zfcp_adapter *adapter)
{
	struct ccw_dev_id dev_id;

	if (adapter->scsi_host)
		return 0;

	ccw_device_get_id(adapter->ccw_device, &dev_id);
	/* register adapter as SCSI host with mid layer of SCSI stack */
	adapter->scsi_host = scsi_host_alloc(&zfcp_scsi_host_template,
					     sizeof (struct zfcp_adapter *));
	if (!adapter->scsi_host) {
		dev_err(&adapter->ccw_device->dev,
			"Registering the FCP device with the "
			"SCSI stack failed\n");
		return -EIO;
	}

	/* tell the SCSI stack some characteristics of this adapter */
	adapter->scsi_host->max_id = 511;
	adapter->scsi_host->max_lun = 0xFFFFFFFF;
	adapter->scsi_host->max_channel = 0;
	adapter->scsi_host->unique_id = dev_id.devno;
	adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
	adapter->scsi_host->transportt = zfcp_scsi_transport_template;

	adapter->scsi_host->hostdata[0] = (unsigned long) adapter;

	if (scsi_add_host(adapter->scsi_host, &adapter->ccw_device->dev)) {
		scsi_host_put(adapter->scsi_host);
		return -EIO;
	}

	return 0;
}

开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:39，代码来源:zfcp_scsi.c

示例2: a2091_probe

static int __devinit a2091_probe(struct zorro_dev *z,
				 const struct zorro_device_id *ent)
{
	struct Scsi_Host *instance;
	int error;
	struct a2091_scsiregs *regs;
	wd33c93_regs wdregs;
	struct a2091_hostdata *hdata;

	if (!request_mem_region(z->resource.start, 256, "wd33c93"))
		return -EBUSY;

	instance = scsi_host_alloc(&a2091_scsi_template,
				   sizeof(struct a2091_hostdata));
	if (!instance) {
		error = -ENOMEM;
		goto fail_alloc;
	}

	instance->irq = IRQ_AMIGA_PORTS;
	instance->unique_id = z->slotaddr;

	regs = (struct a2091_scsiregs *)ZTWO_VADDR(z->resource.start);
	regs->DAWR = DAWR_A2091;

	wdregs.SASR = &regs->SASR;
	wdregs.SCMD = &regs->SCMD;

	hdata = shost_priv(instance);
	hdata->wh.no_sync = 0xff;
	hdata->wh.fast = 0;
	hdata->wh.dma_mode = CTRL_DMA;
	hdata->regs = regs;

	wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10);
	error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
			    "A2091 SCSI", instance);
	if (error)
		goto fail_irq;

	regs->CNTR = CNTR_PDMD | CNTR_INTEN;

	error = scsi_add_host(instance, NULL);
	if (error)
		goto fail_host;

	zorro_set_drvdata(z, instance);

	scsi_scan_host(instance);
	return 0;

fail_host:
	free_irq(IRQ_AMIGA_PORTS, instance);
fail_irq:
	scsi_host_put(instance);
fail_alloc:
	release_mem_region(z->resource.start, 256);
	return error;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:59，代码来源:a2091.c

示例3: mvme147_init

static int __init mvme147_init(void)
{
	wd33c93_regs regs;
	struct WD33C93_hostdata *hdata;
	int error = -ENOMEM;

	if (!MACH_IS_MVME147)
		return 0;

	mvme147_shost = scsi_host_alloc(&mvme147_host_template,
			sizeof(struct WD33C93_hostdata));
	if (!mvme147_shost)
		goto err_out;
	mvme147_shost->base = 0xfffe4000;
	mvme147_shost->irq = MVME147_IRQ_SCSI_PORT;

	regs.SASR = (volatile unsigned char *)0xfffe4000;
	regs.SCMD = (volatile unsigned char *)0xfffe4001;

	hdata = shost_priv(mvme147_shost);
	hdata->no_sync = 0xff;
	hdata->fast = 0;
	hdata->dma_mode = CTRL_DMA;

	wd33c93_init(mvme147_shost, regs, dma_setup, dma_stop, WD33C93_FS_8_10);

	error = request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
			"MVME147 SCSI PORT", mvme147_shost);
	if (error)
		goto err_unregister;
	error = request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
			"MVME147 SCSI DMA", mvme147_shost);
	if (error)
		goto err_free_irq;
#if 0	/* Disabled; causes problems booting */
	m147_pcc->scsi_interrupt = 0x10;	/* Assert SCSI bus reset */
	udelay(100);
	m147_pcc->scsi_interrupt = 0x00;	/* Negate SCSI bus reset */
	udelay(2000);
	m147_pcc->scsi_interrupt = 0x40;	/* Clear bus reset interrupt */
#endif
	m147_pcc->scsi_interrupt = 0x09;	/* Enable interrupt */

	m147_pcc->dma_cntrl = 0x00;	/* ensure DMA is stopped */
	m147_pcc->dma_intr = 0x89;	/* Ack and enable ints */

	error = scsi_add_host(mvme147_shost, NULL);
	if (error)
		goto err_free_irq;
	scsi_scan_host(mvme147_shost);
	return 0;

err_free_irq:
	free_irq(MVME147_IRQ_SCSI_PORT, mvme147_shost);
err_unregister:
	scsi_host_put(mvme147_shost);
err_out:
	return error;
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:59，代码来源:mvme147.c

示例4: dmx3191d_probe_one

static int dmx3191d_probe_one(struct pci_dev *pdev,
			      const struct pci_device_id *id)
{
	struct Scsi_Host *shost;
	struct NCR5380_hostdata *hostdata;
	unsigned long io;
	int error = -ENODEV;

	if (pci_enable_device(pdev))
		goto out;

	io = pci_resource_start(pdev, 0);
	if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
		printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
				io, io + DMX3191D_REGION_LEN);
		goto out_disable_device;
	}

	shost = scsi_host_alloc(&dmx3191d_driver_template,
			sizeof(struct NCR5380_hostdata));
	if (!shost)
		goto out_release_region;       

	hostdata = shost_priv(shost);
	hostdata->base = io;

	/* This card does not seem to raise an interrupt on pdev->irq.
	 * Steam-powered SCSI controllers run without an IRQ anyway.
	 */
	shost->irq = NO_IRQ;

	error = NCR5380_init(shost, 0);
	if (error)
		goto out_host_put;

	NCR5380_maybe_reset_bus(shost);

	pci_set_drvdata(pdev, shost);

	error = scsi_add_host(shost, &pdev->dev);
	if (error)
		goto out_exit;

	scsi_scan_host(shost);
	return 0;

out_exit:
	NCR5380_exit(shost);
out_host_put:
	scsi_host_put(shost);
 out_release_region:
	release_region(io, DMX3191D_REGION_LEN);
 out_disable_device:
	pci_disable_device(pdev);
 out:
	return error;
}

开发者ID:Announcement，项目名称:linux，代码行数:57，代码来源:dmx3191d.c

示例5: cumanascsi1_probe

static int __devinit
cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata));
	if (!host)
		goto out;

        host->io_port = ecard_address(ec, ECARD_IOC, ECARD_SLOW) + 0x800;
	host->irq = ec->irq;

	NCR5380_init(host, 0);

	host->n_io_port = 255;
	if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
		ret = -EBUSY;
		goto out_free;
	}

        ((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0;
        outb(0x00, host->io_port - 577);

	ret = request_irq(host->irq, cumanascsi_intr, SA_INTERRUPT,
			  "CumanaSCSI-1", host);
	if (ret) {
		printk("scsi%d: IRQ%d not free: %d\n",
		    host->host_no, host->irq, ret);
		goto out_release;
	}

	printk("scsi%d: at port 0x%08lx irq %d",
		host->host_no, host->io_port, host->irq);
	printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
		host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE);
	printk("\nscsi%d:", host->host_no);
	NCR5380_print_options(host);
	printk("\n");

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_free_irq;

	scsi_scan_host(host);
	goto out;

 out_free_irq:
	free_irq(host->irq, host);
 out_release:
	release_region(host->io_port, host->n_io_port);
 out_free:
	scsi_host_put(host);
 out:
	return ret;
}

开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:56，代码来源:cumana_1.c

示例6: qlogicfas408_get_chip_type

static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
				struct pcmcia_device *link, int qbase, int qlirq)
{
	int qltyp;		/* type of chip */
	int qinitid;
	struct Scsi_Host *shost;	/* registered host structure */
	struct qlogicfas408_priv *priv;

	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	qinitid = host->this_id;
	if (qinitid < 0)
		qinitid = 7;	/* if no ID, use 7 */

	qlogicfas408_setup(qbase, qinitid, INT_TYPE);

	host->name = qlogic_name;
	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	if (!shost)
		goto err;
	shost->io_port = qbase;
	shost->n_io_port = 16;
	shost->dma_channel = -1;
	if (qlirq != -1)
		shost->irq = qlirq;

	priv = get_priv_by_host(shost);
	priv->qlirq = qlirq;
	priv->qbase = qbase;
	priv->qinitid = qinitid;
	priv->shost = shost;
	priv->int_type = INT_TYPE;					

	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
		goto free_scsi_host;

	sprintf(priv->qinfo,
		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
		qltyp, qbase, qlirq, QL_TURBO_PDMA);

	if (scsi_add_host(shost, NULL))
		goto free_interrupt;

	scsi_scan_host(shost);

	return shost;

free_interrupt:
	free_irq(qlirq, shost);

free_scsi_host:
	scsi_host_put(shost);
	
err:
	return NULL;
}

开发者ID:austriancoder，项目名称:linux，代码行数:55，代码来源:qlogic_stub.c

示例7: dmx3191d_probe_one

static int __devinit dmx3191d_probe_one(struct pci_dev *pdev,
        const struct pci_device_id *id)
{
    struct Scsi_Host *shost;
    unsigned long io;
    int error = -ENODEV;

    if (pci_enable_device(pdev))
        goto out;

    io = pci_resource_start(pdev, 0);
    if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
        printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
                io, io + DMX3191D_REGION_LEN);
        goto out_disable_device;
    }

    shost = scsi_host_alloc(&dmx3191d_driver_template,
            sizeof(struct NCR5380_hostdata));
    if (!shost)
        goto out_release_region;       
    shost->io_port = io;
    shost->irq = pdev->irq;

    NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);

    if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
                DMX3191D_DRIVER_NAME, shost)) {
        /*
         * Steam powered scsi controllers run without an IRQ anyway
         */
        printk(KERN_WARNING "dmx3191: IRQ %d not available - "
                    "switching to polled mode.\n", pdev->irq);
        shost->irq = SCSI_IRQ_NONE;
    }

    pci_set_drvdata(pdev, shost);

    error = scsi_add_host(shost, &pdev->dev);
    if (error)
        goto out_free_irq;

    scsi_scan_host(shost);
    return 0;

 out_free_irq:
    free_irq(shost->irq, shost);
 out_release_region:
    release_region(io, DMX3191D_REGION_LEN);
 out_disable_device:
    pci_disable_device(pdev);
 out:
    return error;
}

开发者ID:274914765，项目名称:C，代码行数:54，代码来源:dmx3191d.c

示例8: cciss_scsi_detect

static int
cciss_scsi_detect(ctlr_info_t *h)
{
	struct Scsi_Host *sh;
	int error;

	sh = scsi_host_alloc(&cciss_driver_template, sizeof(struct ctlr_info *));
	if (sh == NULL)
		goto fail;
	sh->io_port = 0;	// good enough?  FIXME, 
	sh->n_io_port = 0;	// I do

开发者ID:lineuman，项目名称:linux，代码行数:11，代码来源:cciss_scsi.c

示例9: oakscsi_probe

static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	ret = ecard_request_resources(ec);
	if (ret)
		goto out;

	host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
	if (!host) {
		ret = -ENOMEM;
		goto release;
	}

	priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
				   ecard_resource_len(ec, ECARD_RES_MEMC));
	if (!priv(host)->base) {
		ret = -ENOMEM;
		goto unreg;
	}

	host->irq = IRQ_NONE;
	host->n_io_port = 255;

	NCR5380_init(host, 0);

	printk("scsi%d: at port 0x%08lx irqs disabled",
		host->host_no, host->io_port);
	printk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
		host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
	printk("\nscsi%d:", host->host_no);
	NCR5380_print_options(host);
	printk("\n");

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_unmap;

	scsi_scan_host(host);
	goto out;

 out_unmap:
	iounmap(priv(host)->base);
 unreg:
	scsi_host_put(host);
 release:
	ecard_release_resources(ec);
 out:
	return ret;
}

开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:52，代码来源:oak.c

示例10: oakscsi_probe

static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	ret = ecard_request_resources(ec);
	if (ret)
		goto out;

	host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
	if (!host) {
		ret = -ENOMEM;
		goto release;
	}

	priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
				   ecard_resource_len(ec, ECARD_RES_MEMC));
	if (!priv(host)->base) {
		ret = -ENOMEM;
		goto unreg;
	}

	host->irq = NO_IRQ;
	host->n_io_port = 255;

	ret = NCR5380_init(host, 0);
	if (ret)
		goto out_unmap;

	NCR5380_maybe_reset_bus(host);

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_exit;

	scsi_scan_host(host);
	goto out;

 out_exit:
	NCR5380_exit(host);
 out_unmap:
	iounmap(priv(host)->base);
 unreg:
	scsi_host_put(host);
 release:
	ecard_release_resources(ec);
 out:
	return ret;
}

开发者ID:020gzh，项目名称:linux，代码行数:49，代码来源:oak.c

示例11: tcm_loop_driver_probe

static int tcm_loop_driver_probe(struct device *dev)
{
	struct tcm_loop_hba *tl_hba;
	struct Scsi_Host *sh;
	int error, host_prot;

	tl_hba = to_tcm_loop_hba(dev);

	sh = scsi_host_alloc(&tcm_loop_driver_template,
			sizeof(struct tcm_loop_hba));
	if (!sh) {
		pr_err("Unable to allocate struct scsi_host\n");
		return -ENODEV;
	}
	tl_hba->sh = sh;

	/*
	 * Assign the struct tcm_loop_hba pointer to struct Scsi_Host->hostdata
	 */
	*((struct tcm_loop_hba **)sh->hostdata) = tl_hba;
	/*
	 * Setup single ID, Channel and LUN for now..
	 */
	sh->max_id = 2;
	sh->max_lun = 0;
	sh->max_channel = 0;
	sh->max_cmd_len = TL_SCSI_MAX_CMD_LEN;

	host_prot = SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION |
		    SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION |
		    SHOST_DIX_TYPE2_PROTECTION | SHOST_DIX_TYPE3_PROTECTION;

	scsi_host_set_prot(sh, host_prot);
	scsi_host_set_guard(sh, SHOST_DIX_GUARD_CRC);

	error = scsi_add_host(sh, &tl_hba->dev);
	if (error) {
		pr_err("%s: scsi_add_host failed\n", __func__);
		scsi_host_put(sh);
		return -ENODEV;
	}
	return 0;
}

开发者ID:pombredanne，项目名称:mithrandir，代码行数:43，代码来源:tcm_loop.c

示例12: oakscsi_probe

static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
	if (!host)
		goto out;

	host->io_port = ecard_address(ec, ECARD_MEMC, 0);
	host->irq = IRQ_NONE;
	host->n_io_port = 255;

	ret = -EBUSY;
	if (!request_region (host->io_port, host->n_io_port, "Oak SCSI"))
		goto unreg;

	NCR5380_init(host, 0);

	printk("scsi%d: at port 0x%08lx irqs disabled",
		host->host_no, host->io_port);
	printk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
		host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
	printk("\nscsi%d:", host->host_no);
	NCR5380_print_options(host);
	printk("\n");

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_release;

	scsi_scan_host(host);
	goto out;

 out_release:
	release_region(host->io_port, host->n_io_port);
 unreg:
	scsi_host_put(host);
 out:
	return ret;
}

开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:42，代码来源:oak.c

示例13: tcm_loop_driver_probe

static int tcm_loop_driver_probe(struct device *dev)
{
	struct tcm_loop_hba *tl_hba;
	struct Scsi_Host *sh;
	int error;

	tl_hba = to_tcm_loop_hba(dev);

	sh = scsi_host_alloc(&tcm_loop_driver_template,
			sizeof(struct tcm_loop_hba));
	if (!sh) {
		printk(KERN_ERR "Unable to allocate struct scsi_host\n");
		return -ENODEV;
	}
	tl_hba->sh = sh;

	/*
	 * Assign the struct tcm_loop_hba pointer to struct Scsi_Host->hostdata
	 */
	*((struct tcm_loop_hba **)sh->hostdata) = tl_hba;
	/*
	 * Setup single ID, Channel and LUN for now..
	 */
	sh->max_id = 2;
	sh->max_lun = 0;
	sh->max_channel = 0;
	sh->max_cmd_len = TL_SCSI_MAX_CMD_LEN;

	error = scsi_add_host(sh, &tl_hba->dev);
	if (error) {
		printk(KERN_ERR "%s: scsi_add_host failed\n", __func__);
		scsi_host_put(sh);
		return -ENODEV;
	}
	return 0;
}

开发者ID:5C4R4B3，项目名称:CINK_SLIM_ICS_Opensource，代码行数:36，代码来源:tcm_loop.c

示例14: esp_sun3x_probe

static int __devinit esp_sun3x_probe(struct platform_device *dev)
{
	struct scsi_host_template *tpnt = &scsi_esp_template;
	struct Scsi_Host *host;
	struct esp *esp;
	struct resource *res;
	int err = -ENOMEM;

	host = scsi_host_alloc(tpnt, sizeof(struct esp));
	if (!host)
		goto fail;

	host->max_id = 8;
	esp = shost_priv(host);

	esp->host = host;
	esp->dev = dev;
	esp->ops = &sun3x_esp_ops;

	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
	if (!res && !res->start)
		goto fail_unlink;

	esp->regs = ioremap_nocache(res->start, 0x20);
	if (!esp->regs)
		goto fail_unmap_regs;

	res = platform_get_resource(dev, IORESOURCE_MEM, 1);
	if (!res && !res->start)
		goto fail_unmap_regs;

	esp->dma_regs = ioremap_nocache(res->start, 0x10);

	esp->command_block = dma_alloc_coherent(esp->dev, 16,
						&esp->command_block_dma,
						GFP_KERNEL);
	if (!esp->command_block)
		goto fail_unmap_regs_dma;

	host->irq = platform_get_irq(dev, 0);
	err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED,
			  "SUN3X ESP", esp);
	if (err < 0)
		goto fail_unmap_command_block;

	esp->scsi_id = 7;
	esp->host->this_id = esp->scsi_id;
	esp->scsi_id_mask = (1 << esp->scsi_id);
	esp->cfreq = 20000000;

	dev_set_drvdata(&dev->dev, esp);

	err = scsi_esp_register(esp, &dev->dev);
	if (err)
		goto fail_free_irq;

	return 0;

fail_free_irq:
	free_irq(host->irq, esp);
fail_unmap_command_block:
	dma_free_coherent(esp->dev, 16,
			  esp->command_block,
			  esp->command_block_dma);
fail_unmap_regs_dma:
	iounmap(esp->dma_regs);
fail_unmap_regs:
	iounmap(esp->regs);
fail_unlink:
	scsi_host_put(host);
fail:
	return err;
}

开发者ID:BackupTheBerlios，项目名称:grasshopper-svn，代码行数:73，代码来源:sun3x_esp.c

示例15: rtsx_probe

static int rtsx_probe(struct pci_dev *pci,
				const struct pci_device_id *pci_id)
{
	struct Scsi_Host *host;
	struct rtsx_dev *dev;
	int err = 0;
	struct task_struct *th;

	dev_dbg(&pci->dev, "Realtek PCI-E card reader detected\n");

	err = pcim_enable_device(pci);
	if (err < 0) {
		dev_err(&pci->dev, "PCI enable device failed!\n");
		return err;
	}

	err = pci_request_regions(pci, CR_DRIVER_NAME);
	if (err < 0) {
		dev_err(&pci->dev, "PCI request regions for %s failed!\n",
			CR_DRIVER_NAME);
		return err;
	}

	/*
	 * Ask the SCSI layer to allocate a host structure, with extra
	 * space at the end for our private rtsx_dev structure.
	 */
	host = scsi_host_alloc(&rtsx_host_template, sizeof(*dev));
	if (!host) {
		dev_err(&pci->dev, "Unable to allocate the scsi host\n");
		return -ENOMEM;
	}

	dev = host_to_rtsx(host);
	memset(dev, 0, sizeof(struct rtsx_dev));

	dev->chip = kzalloc(sizeof(struct rtsx_chip), GFP_KERNEL);
	if (!dev->chip) {
		err = -ENOMEM;
		goto errout;
	}

	spin_lock_init(&dev->reg_lock);
	mutex_init(&(dev->dev_mutex));
	init_completion(&dev->cmnd_ready);
	init_completion(&dev->control_exit);
	init_completion(&dev->polling_exit);
	init_completion(&(dev->notify));
	init_completion(&dev->scanning_done);
	init_waitqueue_head(&dev->delay_wait);

	dev->pci = pci;
	dev->irq = -1;

	dev_info(&pci->dev, "Resource length: 0x%x\n",
		 (unsigned int)pci_resource_len(pci, 0));
	dev->addr = pci_resource_start(pci, 0);
	dev->remap_addr = ioremap_nocache(dev->addr, pci_resource_len(pci, 0));
	if (!dev->remap_addr) {
		dev_err(&pci->dev, "ioremap error\n");
		err = -ENXIO;
		goto errout;
	}

	/*
	 * Using "unsigned long" cast here to eliminate gcc warning in
	 * 64-bit system
	 */
	dev_info(&pci->dev, "Original address: 0x%lx, remapped address: 0x%lx\n",
		 (unsigned long)(dev->addr), (unsigned long)(dev->remap_addr));

	dev->rtsx_resv_buf = dmam_alloc_coherent(&pci->dev, RTSX_RESV_BUF_LEN,
			&dev->rtsx_resv_buf_addr, GFP_KERNEL);
	if (!dev->rtsx_resv_buf) {
		dev_err(&pci->dev, "alloc dma buffer fail\n");
		err = -ENXIO;
		goto errout;
	}
	dev->chip->host_cmds_ptr = dev->rtsx_resv_buf;
	dev->chip->host_cmds_addr = dev->rtsx_resv_buf_addr;
	dev->chip->host_sg_tbl_ptr = dev->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
	dev->chip->host_sg_tbl_addr = dev->rtsx_resv_buf_addr +
				      HOST_CMDS_BUF_LEN;

	dev->chip->rtsx = dev;

	rtsx_init_options(dev->chip);

	dev_info(&pci->dev, "pci->irq = %d\n", pci->irq);

	if (dev->chip->msi_en) {
		if (pci_enable_msi(pci) < 0)
			dev->chip->msi_en = 0;
	}

	if (rtsx_acquire_irq(dev) < 0) {
		err = -EBUSY;
		goto errout;
	}

//.........这里部分代码省略.........

开发者ID:acton393，项目名称:linux，代码行数:101，代码来源:rtsx.c

示例16: cumanascsi1_probe

static int __devinit
cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret;

	ret = ecard_request_resources(ec);
	if (ret)
		goto out;

	host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata));
	if (!host) {
		ret = -ENOMEM;
		goto out_release;
	}

	priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCSLOW),
				   ecard_resource_len(ec, ECARD_RES_IOCSLOW));
	priv(host)->dma = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
				  ecard_resource_len(ec, ECARD_RES_MEMC));
	if (!priv(host)->base || !priv(host)->dma) {
		ret = -ENOMEM;
		goto out_unmap;
	}

	host->irq = ec->irq;

	NCR5380_init(host, 0);

        priv(host)->ctrl = 0;
        writeb(0, priv(host)->base + CTRL);

	host->n_io_port = 255;
	if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
		ret = -EBUSY;
		goto out_unmap;
	}

	ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED,
			  "CumanaSCSI-1", host);
	if (ret) {
		printk("scsi%d: IRQ%d not free: %d\n",
		    host->host_no, host->irq, ret);
		goto out_unmap;
	}

	printk("scsi%d: at port 0x%08lx irq %d",
		host->host_no, host->io_port, host->irq);
	printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
		host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE);
	printk("\nscsi%d:", host->host_no);
	NCR5380_print_options(host);
	printk("\n");

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_free_irq;

	scsi_scan_host(host);
	goto out;

 out_free_irq:
	free_irq(host->irq, host);
 out_unmap:
	iounmap(priv(host)->base);
	iounmap(priv(host)->dma);
	scsi_host_put(host);
 out_release:
	ecard_release_resources(ec);
 out:
	return ret;
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:72，代码来源:cumana_1.c

示例17: powertecscsi_probe

static int __devinit
powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	struct powertec_info *info;
	unsigned long resbase, reslen;
	void __iomem *base;
	int ret;

	ret = ecard_request_resources(ec);
	if (ret)
		goto out;

	resbase = ecard_resource_start(ec, ECARD_RES_IOCFAST);
	reslen = ecard_resource_len(ec, ECARD_RES_IOCFAST);
	base = ioremap(resbase, reslen);
	if (!base) {
		ret = -ENOMEM;
		goto out_region;
	}

	host = scsi_host_alloc(&powertecscsi_template,
			       sizeof (struct powertec_info));
	if (!host) {
		ret = -ENOMEM;
		goto out_unmap;
	}

	ecard_set_drvdata(ec, host);

	info = (struct powertec_info *)host->hostdata;
	info->base = base;
	powertecscsi_terminator_ctl(host, term[ec->slot_no]);

	info->info.scsi.io_base		= base + POWERTEC_FAS216_OFFSET;
	info->info.scsi.io_shift	= POWERTEC_FAS216_SHIFT;
	info->info.scsi.irq		= ec->irq;
	info->info.scsi.dma		= ec->dma;
	info->info.ifcfg.clockrate	= 40; /* MHz */
	info->info.ifcfg.select_timeout	= 255;
	info->info.ifcfg.asyncperiod	= 200; /* ns */
	info->info.ifcfg.sync_max_depth	= 7;
	info->info.ifcfg.cntl3		= CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK;
	info->info.ifcfg.disconnect_ok	= 1;
	info->info.ifcfg.wide_max_size	= 0;
	info->info.ifcfg.capabilities	= 0;
	info->info.dma.setup		= powertecscsi_dma_setup;
	info->info.dma.pseudo		= NULL;
	info->info.dma.stop		= powertecscsi_dma_stop;

	ec->irqaddr	= base + POWERTEC_INTR_STATUS;
	ec->irqmask	= POWERTEC_INTR_BIT;
	ec->irq_data	= info;
	ec->ops		= &powertecscsi_ops;

	device_create_file(&ec->dev, &dev_attr_bus_term);

	ret = fas216_init(host);
	if (ret)
		goto out_free;

	ret = request_irq(ec->irq, powertecscsi_intr,
			  SA_INTERRUPT, "powertec", info);
	if (ret) {
		printk("scsi%d: IRQ%d not free: %d\n",
		       host->host_no, ec->irq, ret);
		goto out_release;
	}

	if (info->info.scsi.dma != NO_DMA) {
		if (request_dma(info->info.scsi.dma, "powertec")) {
			printk("scsi%d: DMA%d not free, using PIO\n",
			       host->host_no, info->info.scsi.dma);
			info->info.scsi.dma = NO_DMA;
		} else {
			set_dma_speed(info->info.scsi.dma, 180);
			info->info.ifcfg.capabilities |= FASCAP_DMA;
		}
	}

	ret = fas216_add(host, &ec->dev);
	if (ret == 0)
		goto out;

	if (info->info.scsi.dma != NO_DMA)
		free_dma(info->info.scsi.dma);
	free_irq(ec->irq, host);

 out_release:
	fas216_release(host);

 out_free:
	device_remove_file(&ec->dev, &dev_attr_bus_term);
	scsi_host_put(host);

 out_unmap:
	iounmap(base);

 out_region:
	ecard_release_resources(ec);
//.........这里部分代码省略.........

开发者ID:Dronevery，项目名称:JetsonTK1-kernel，代码行数:101，代码来源:powertec.c

示例18: mts_usb_probe


//.........这里部分代码省略.........
	altsetting = intf->cur_altsetting;


	/* Check if the config is sane */

	if ( altsetting->desc.bNumEndpoints != MTS_EP_TOTAL ) {
		MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
			     (int)MTS_EP_TOTAL, (int)altsetting->desc.bNumEndpoints );
		return -ENODEV;
	}

	for( i = 0; i < altsetting->desc.bNumEndpoints; i++ ) {
		if ((altsetting->endpoint[i].desc.bmAttributes &
		     USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {

			MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
			     (int)altsetting->endpoint[i].desc.bEndpointAddress );
		} else {
			if (altsetting->endpoint[i].desc.bEndpointAddress &
			    USB_DIR_IN)
				*ep_in_current++
					= altsetting->endpoint[i].desc.bEndpointAddress &
					USB_ENDPOINT_NUMBER_MASK;
			else {
				if ( ep_out != -1 ) {
					MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
					return -ENODEV;
				}

				ep_out = altsetting->endpoint[i].desc.bEndpointAddress &
					USB_ENDPOINT_NUMBER_MASK;
			}
		}

	}


	if ( ep_out == -1 ) {
		MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
		return -ENODEV;
	}


	new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL);
	if (!new_desc)
		goto out;

	new_desc->urb = usb_alloc_urb(0, GFP_KERNEL);
	if (!new_desc->urb)
		goto out_kfree;

	new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL);
	if (!new_desc->context.scsi_status)
		goto out_kfree2;

	new_desc->usb_dev = dev;
	new_desc->usb_intf = intf;
	init_MUTEX(&new_desc->lock);

	/* endpoints */
	new_desc->ep_out = ep_out;
	new_desc->ep_response = ep_in_set[0];
	new_desc->ep_image = ep_in_set[1];

	if ( new_desc->ep_out != MTS_EP_OUT )
		MTS_WARNING( "will this work? Command EP is not usually %d\n",
			     (int)new_desc->ep_out );

	if ( new_desc->ep_response != MTS_EP_RESPONSE )
		MTS_WARNING( "will this work? Response EP is not usually %d\n",
			     (int)new_desc->ep_response );

	if ( new_desc->ep_image != MTS_EP_IMAGE )
		MTS_WARNING( "will this work? Image data EP is not usually %d\n",
			     (int)new_desc->ep_image );

	new_desc->host = scsi_host_alloc(&mts_scsi_host_template,
			sizeof(new_desc));
	if (!new_desc->host)
		goto out_free_urb;

	new_desc->host->hostdata[0] = (unsigned long)new_desc;
	if (scsi_add_host(new_desc->host, NULL)) {
		err_retval = -EIO;
		goto out_free_urb;
	}
	scsi_scan_host(new_desc->host);

	usb_set_intfdata(intf, new_desc);
	return 0;

 out_kfree2:
	kfree(new_desc->context.scsi_status);
 out_free_urb:
	usb_free_urb(new_desc->urb);
 out_kfree:
	kfree(new_desc);
 out:
	return err_retval;
}

开发者ID:FatSunHYS，项目名称:OSCourseDesign，代码行数:101，代码来源:microtek.c

示例19: esas2r_probe

static int esas2r_probe(struct pci_dev *pcid,
			const struct pci_device_id *id)
{
	struct Scsi_Host *host = NULL;
	struct esas2r_adapter *a;
	int err;

	size_t host_alloc_size = sizeof(struct esas2r_adapter)
				 + ((num_requests) +
				    1) * sizeof(struct esas2r_request);

	esas2r_log_dev(ESAS2R_LOG_DEBG, &(pcid->dev),
		       "esas2r_probe() 0x%02x 0x%02x 0x%02x 0x%02x",
		       pcid->vendor,
		       pcid->device,
		       pcid->subsystem_vendor,
		       pcid->subsystem_device);

	esas2r_log_dev(ESAS2R_LOG_INFO, &(pcid->dev),
		       "before pci_enable_device() "
		       "enable_cnt: %d",
		       pcid->enable_cnt.counter);

	err = pci_enable_device(pcid);
	if (err != 0) {
		esas2r_log_dev(ESAS2R_LOG_CRIT, &(pcid->dev),
			       "pci_enable_device() FAIL (%d)",
			       err);
		return -ENODEV;
	}

	esas2r_log_dev(ESAS2R_LOG_INFO, &(pcid->dev),
		       "pci_enable_device() OK");
	esas2r_log_dev(ESAS2R_LOG_INFO, &(pcid->dev),
		       "after pci_enable_device() enable_cnt: %d",
		       pcid->enable_cnt.counter);

	host = scsi_host_alloc(&driver_template, host_alloc_size);
	if (host == NULL) {
		esas2r_log(ESAS2R_LOG_CRIT, "scsi_host_alloc() FAIL");
		return -ENODEV;
	}

	memset(host->hostdata, 0, host_alloc_size);

	a = (struct esas2r_adapter *)host->hostdata;

	esas2r_log(ESAS2R_LOG_INFO, "scsi_host_alloc() OK host: %p", host);

	/* override max LUN and max target id */

	host->max_id = ESAS2R_MAX_ID + 1;
	host->max_lun = 255;

	/* we can handle 16-byte CDbs */

	host->max_cmd_len = 16;

	host->can_queue = can_queue;
	host->cmd_per_lun = cmd_per_lun;
	host->this_id = host->max_id + 1;
	host->max_channel = 0;
	host->unique_id = found_adapters;
	host->sg_tablesize = sg_tablesize;
	host->max_sectors = esas2r_max_sectors;

	/* set to bus master for BIOses that don't do it for us */

	esas2r_log(ESAS2R_LOG_INFO, "pci_set_master() called");

	pci_set_master(pcid);

	if (!esas2r_init_adapter(host, pcid, found_adapters)) {
		esas2r_log(ESAS2R_LOG_CRIT,
			   "unable to initialize device at PCI bus %x:%x",
			   pcid->bus->number,
			   pcid->devfn);

		esas2r_log_dev(ESAS2R_LOG_INFO, &(host->shost_gendev),
			       "scsi_host_put() called");

		scsi_host_put(host);

		return 0;

	}

	esas2r_log(ESAS2R_LOG_INFO, "pci_set_drvdata(%p, %p) called", pcid,
		   host->hostdata);

	pci_set_drvdata(pcid, host);

	esas2r_log(ESAS2R_LOG_INFO, "scsi_add_host() called");

	err = scsi_add_host(host, &pcid->dev);

	if (err) {
		esas2r_log(ESAS2R_LOG_CRIT, "scsi_add_host returned %d", err);
		esas2r_log_dev(ESAS2R_LOG_CRIT, &(host->shost_gendev),
			       "scsi_add_host() FAIL");
//.........这里部分代码省略.........

开发者ID:Anjali05，项目名称:linux，代码行数:101，代码来源:esas2r_main.c

示例20: printk

static struct Scsi_Host *__qlogicfas_detect(struct scsi_host_template *host,
								int qbase,
								int qlirq)
{
	int qltyp;		
	int qinitid;
	struct Scsi_Host *hreg;	
	struct qlogicfas408_priv *priv;


	if (!qbase || qlirq == -1)
		goto err;

	if (!request_region(qbase, 0x10, qlogicfas_name)) {
		printk(KERN_INFO "%s: address %#x is busy\n", qlogicfas_name,
							      qbase);
		goto err;
	}

	if (!qlogicfas408_detect(qbase, INT_TYPE)) {
		printk(KERN_WARNING "%s: probe failed for %#x\n",
								qlogicfas_name,
								qbase);
		goto err_release_mem;
	}

	printk(KERN_INFO "%s: Using preset base address of %03x,"
			 " IRQ %d\n", qlogicfas_name, qbase, qlirq);

	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	qinitid = host->this_id;
	if (qinitid < 0)
		qinitid = 7;	

	qlogicfas408_setup(qbase, qinitid, INT_TYPE);

	hreg = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	if (!hreg)
		goto err_release_mem;
	priv = get_priv_by_host(hreg);
	hreg->io_port = qbase;
	hreg->n_io_port = 16;
	hreg->dma_channel = -1;
	if (qlirq != -1)
		hreg->irq = qlirq;
	priv->qbase = qbase;
	priv->qlirq = qlirq;
	priv->qinitid = qinitid;
	priv->shost = hreg;
	priv->int_type = INT_TYPE;

	sprintf(priv->qinfo,
		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
		qltyp, qbase, qlirq, QL_TURBO_PDMA);
	host->name = qlogicfas_name;

	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogicfas_name, hreg))
		goto free_scsi_host;

	if (scsi_add_host(hreg, NULL))
		goto free_interrupt;

	scsi_scan_host(hreg);

	return hreg;

free_interrupt:
	free_irq(qlirq, hreg);

free_scsi_host:
	scsi_host_put(hreg);

err_release_mem:
	release_region(qbase, 0x10);
err:
	return NULL;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:77，代码来源:qlogicfas.c

注：本文中的scsi_host_alloc函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ scsi_host_put函数代码示例发布时间：2022-05-30

C++ scsi_get_resid函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19159|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ scsi_host_alloc函数代码示例

示例1: zfcp_scsi_adapter_register

示例2: a2091_probe

示例3: mvme147_init

示例4: dmx3191d_probe_one

示例5: cumanascsi1_probe

示例6: qlogicfas408_get_chip_type

示例7: dmx3191d_probe_one

示例8: cciss_scsi_detect

示例9: oakscsi_probe

示例10: oakscsi_probe

示例11: tcm_loop_driver_probe

示例12: oakscsi_probe

示例13: tcm_loop_driver_probe

示例14: esp_sun3x_probe

示例15: rtsx_probe

示例16: cumanascsi1_probe

示例17: powertecscsi_probe

示例18: mts_usb_probe

示例19: esas2r_probe

示例20: printk

请发表评论

全部评论

上一篇：

下一篇：

kojino/Harvard-Robust-Machine-Learning:

cescoffier/puppet-nexus: A Puppet Module

文的笔顺,诠释文的笔画,解读文的部首

abos3d/CleanArchitectKotlinFlowHiltSimpl

Cassolotl/sentient.cloud · GitHub

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053