本文整理汇总了C++中scsi_add_host函数的典型用法代码示例。如果您正苦于以下问题：C++ scsi_add_host函数的具体用法？C++ scsi_add_host怎么用？C++ scsi_add_host使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了scsi_add_host函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: zfcp_scsi_adapter_register
/**
* zfcp_scsi_adapter_register - Register SCSI and FC host with SCSI midlayer
* @adapter: The zfcp adapter to register with the SCSI midlayer
*/
int zfcp_scsi_adapter_register(struct zfcp_adapter *adapter)
{
struct ccw_dev_id dev_id;
if (adapter->scsi_host)
return 0;
ccw_device_get_id(adapter->ccw_device, &dev_id);
/* register adapter as SCSI host with mid layer of SCSI stack */
adapter->scsi_host = scsi_host_alloc(&zfcp_scsi_host_template,
sizeof (struct zfcp_adapter *));
if (!adapter->scsi_host) {
dev_err(&adapter->ccw_device->dev,
"Registering the FCP device with the "
"SCSI stack failed\n");
return -EIO;
}
/* tell the SCSI stack some characteristics of this adapter */
adapter->scsi_host->max_id = 511;
adapter->scsi_host->max_lun = 0xFFFFFFFF;
adapter->scsi_host->max_channel = 0;
adapter->scsi_host->unique_id = dev_id.devno;
adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
adapter->scsi_host->transportt = zfcp_scsi_transport_template;
adapter->scsi_host->hostdata[0] = (unsigned long) adapter;
if (scsi_add_host(adapter->scsi_host, &adapter->ccw_device->dev)) {
scsi_host_put(adapter->scsi_host);
return -EIO;
}
return 0;
}
开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:39，代码来源:zfcp_scsi.c
示例2: fcoe_sw_shost_config
/*
* fcoe_sw_shost_config - sets up fc_lport->host
* @lp : ptr to the fc_lport
* @shost : ptr to the associated scsi host
* @dev : device associated to scsi host
*
* Must be called after fcoe_sw_lport_config) and fcoe_sw_netdev_config()
*
* Returns : 0 for success
*
*/
static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
struct device *dev)
{
int rc = 0;
/* lport scsi host config */
lp->host = shost;
lp->host->max_lun = FCOE_MAX_LUN;
lp->host->max_id = FCOE_MAX_FCP_TARGET;
lp->host->max_channel = 0;
lp->host->transportt = scsi_transport_fcoe_sw;
/* add the new host to the SCSI-ml */
rc = scsi_add_host(lp->host, dev);
if (rc) {
FC_DBG("fcoe_sw_shost_config:error on scsi_add_host\n");
return rc;
}
sprintf(fc_host_symbolic_name(lp->host), "%s v%s over %s",
FCOE_SW_NAME, FCOE_SW_VERSION,
fcoe_netdev(lp)->name);
return 0;
}
开发者ID:melgurth，项目名称:i780-kernel，代码行数:36，代码来源:fcoe_sw.c
示例3: a2091_probe
static int __devinit a2091_probe(struct zorro_dev *z,
const struct zorro_device_id *ent)
{
struct Scsi_Host *instance;
int error;
struct a2091_scsiregs *regs;
wd33c93_regs wdregs;
struct a2091_hostdata *hdata;
if (!request_mem_region(z->resource.start, 256, "wd33c93"))
return -EBUSY;
instance = scsi_host_alloc(&a2091_scsi_template,
sizeof(struct a2091_hostdata));
if (!instance) {
error = -ENOMEM;
goto fail_alloc;
}
instance->irq = IRQ_AMIGA_PORTS;
instance->unique_id = z->slotaddr;
regs = (struct a2091_scsiregs *)ZTWO_VADDR(z->resource.start);
regs->DAWR = DAWR_A2091;
wdregs.SASR = ®s->SASR;
wdregs.SCMD = ®s->SCMD;
hdata = shost_priv(instance);
hdata->wh.no_sync = 0xff;
hdata->wh.fast = 0;
hdata->wh.dma_mode = CTRL_DMA;
hdata->regs = regs;
wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10);
error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
"A2091 SCSI", instance);
if (error)
goto fail_irq;
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
zorro_set_drvdata(z, instance);
scsi_scan_host(instance);
return 0;
fail_host:
free_irq(IRQ_AMIGA_PORTS, instance);
fail_irq:
scsi_host_put(instance);
fail_alloc:
release_mem_region(z->resource.start, 256);
return error;
}
开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:59，代码来源:a2091.c
示例4: mvme147_init
static int __init mvme147_init(void)
{
wd33c93_regs regs;
struct WD33C93_hostdata *hdata;
int error = -ENOMEM;
if (!MACH_IS_MVME147)
return 0;
mvme147_shost = scsi_host_alloc(&mvme147_host_template,
sizeof(struct WD33C93_hostdata));
if (!mvme147_shost)
goto err_out;
mvme147_shost->base = 0xfffe4000;
mvme147_shost->irq = MVME147_IRQ_SCSI_PORT;
regs.SASR = (volatile unsigned char *)0xfffe4000;
regs.SCMD = (volatile unsigned char *)0xfffe4001;
hdata = shost_priv(mvme147_shost);
hdata->no_sync = 0xff;
hdata->fast = 0;
hdata->dma_mode = CTRL_DMA;
wd33c93_init(mvme147_shost, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
error = request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
"MVME147 SCSI PORT", mvme147_shost);
if (error)
goto err_unregister;
error = request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
"MVME147 SCSI DMA", mvme147_shost);
if (error)
goto err_free_irq;
#if 0 /* Disabled; causes problems booting */
m147_pcc->scsi_interrupt = 0x10; /* Assert SCSI bus reset */
udelay(100);
m147_pcc->scsi_interrupt = 0x00; /* Negate SCSI bus reset */
udelay(2000);
m147_pcc->scsi_interrupt = 0x40; /* Clear bus reset interrupt */
#endif
m147_pcc->scsi_interrupt = 0x09; /* Enable interrupt */
m147_pcc->dma_cntrl = 0x00; /* ensure DMA is stopped */
m147_pcc->dma_intr = 0x89; /* Ack and enable ints */
error = scsi_add_host(mvme147_shost, NULL);
if (error)
goto err_free_irq;
scsi_scan_host(mvme147_shost);
return 0;
err_free_irq:
free_irq(MVME147_IRQ_SCSI_PORT, mvme147_shost);
err_unregister:
scsi_host_put(mvme147_shost);
err_out:
return error;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:59，代码来源:mvme147.c
示例5: dmx3191d_probe_one
static int dmx3191d_probe_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct Scsi_Host *shost;
struct NCR5380_hostdata *hostdata;
unsigned long io;
int error = -ENODEV;
if (pci_enable_device(pdev))
goto out;
io = pci_resource_start(pdev, 0);
if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
io, io + DMX3191D_REGION_LEN);
goto out_disable_device;
}
shost = scsi_host_alloc(&dmx3191d_driver_template,
sizeof(struct NCR5380_hostdata));
if (!shost)
goto out_release_region;
hostdata = shost_priv(shost);
hostdata->base = io;
/* This card does not seem to raise an interrupt on pdev->irq.
* Steam-powered SCSI controllers run without an IRQ anyway.
*/
shost->irq = NO_IRQ;
error = NCR5380_init(shost, 0);
if (error)
goto out_host_put;
NCR5380_maybe_reset_bus(shost);
pci_set_drvdata(pdev, shost);
error = scsi_add_host(shost, &pdev->dev);
if (error)
goto out_exit;
scsi_scan_host(shost);
return 0;
out_exit:
NCR5380_exit(shost);
out_host_put:
scsi_host_put(shost);
out_release_region:
release_region(io, DMX3191D_REGION_LEN);
out_disable_device:
pci_disable_device(pdev);
out:
return error;
}
开发者ID:Announcement，项目名称:linux，代码行数:57，代码来源:dmx3191d.c
示例6: cumanascsi1_probe
static int __devinit
cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret = -ENOMEM;
host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata));
if (!host)
goto out;
host->io_port = ecard_address(ec, ECARD_IOC, ECARD_SLOW) + 0x800;
host->irq = ec->irq;
NCR5380_init(host, 0);
host->n_io_port = 255;
if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
ret = -EBUSY;
goto out_free;
}
((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0;
outb(0x00, host->io_port - 577);
ret = request_irq(host->irq, cumanascsi_intr, SA_INTERRUPT,
"CumanaSCSI-1", host);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, host->irq, ret);
goto out_release;
}
printk("scsi%d: at port 0x%08lx irq %d",
host->host_no, host->io_port, host->irq);
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE);
printk("\nscsi%d:", host->host_no);
NCR5380_print_options(host);
printk("\n");
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_free_irq;
scsi_scan_host(host);
goto out;
out_free_irq:
free_irq(host->irq, host);
out_release:
release_region(host->io_port, host->n_io_port);
out_free:
scsi_host_put(host);
out:
return ret;
}
开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:56，代码来源:cumana_1.c
示例7: qlogicfas408_get_chip_type
static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
struct pcmcia_device *link, int qbase, int qlirq)
{
int qltyp; /* type of chip */
int qinitid;
struct Scsi_Host *shost; /* registered host structure */
struct qlogicfas408_priv *priv;
qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
qinitid = host->this_id;
if (qinitid < 0)
qinitid = 7; /* if no ID, use 7 */
qlogicfas408_setup(qbase, qinitid, INT_TYPE);
host->name = qlogic_name;
shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
if (!shost)
goto err;
shost->io_port = qbase;
shost->n_io_port = 16;
shost->dma_channel = -1;
if (qlirq != -1)
shost->irq = qlirq;
priv = get_priv_by_host(shost);
priv->qlirq = qlirq;
priv->qbase = qbase;
priv->qinitid = qinitid;
priv->shost = shost;
priv->int_type = INT_TYPE;
if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
goto free_scsi_host;
sprintf(priv->qinfo,
"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
qltyp, qbase, qlirq, QL_TURBO_PDMA);
if (scsi_add_host(shost, NULL))
goto free_interrupt;
scsi_scan_host(shost);
return shost;
free_interrupt:
free_irq(qlirq, shost);
free_scsi_host:
scsi_host_put(shost);
err:
return NULL;
}
开发者ID:austriancoder，项目名称:linux，代码行数:55，代码来源:qlogic_stub.c
示例8: dmx3191d_probe_one
static int __devinit dmx3191d_probe_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct Scsi_Host *shost;
unsigned long io;
int error = -ENODEV;
if (pci_enable_device(pdev))
goto out;
io = pci_resource_start(pdev, 0);
if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
io, io + DMX3191D_REGION_LEN);
goto out_disable_device;
}
shost = scsi_host_alloc(&dmx3191d_driver_template,
sizeof(struct NCR5380_hostdata));
if (!shost)
goto out_release_region;
shost->io_port = io;
shost->irq = pdev->irq;
NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
DMX3191D_DRIVER_NAME, shost)) {
/*
* Steam powered scsi controllers run without an IRQ anyway
*/
printk(KERN_WARNING "dmx3191: IRQ %d not available - "
"switching to polled mode.\n", pdev->irq);
shost->irq = SCSI_IRQ_NONE;
}
pci_set_drvdata(pdev, shost);
error = scsi_add_host(shost, &pdev->dev);
if (error)
goto out_free_irq;
scsi_scan_host(shost);
return 0;
out_free_irq:
free_irq(shost->irq, shost);
out_release_region:
release_region(io, DMX3191D_REGION_LEN);
out_disable_device:
pci_disable_device(pdev);
out:
return error;
}
开发者ID:274914765，项目名称:C，代码行数:54，代码来源:dmx3191d.c
示例9: oakscsi_probe
static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret = -ENOMEM;
ret = ecard_request_resources(ec);
if (ret)
goto out;
host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
if (!host) {
ret = -ENOMEM;
goto release;
}
priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
ecard_resource_len(ec, ECARD_RES_MEMC));
if (!priv(host)->base) {
ret = -ENOMEM;
goto unreg;
}
host->irq = IRQ_NONE;
host->n_io_port = 255;
NCR5380_init(host, 0);
printk("scsi%d: at port 0x%08lx irqs disabled",
host->host_no, host->io_port);
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
printk("\nscsi%d:", host->host_no);
NCR5380_print_options(host);
printk("\n");
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_unmap;
scsi_scan_host(host);
goto out;
out_unmap:
iounmap(priv(host)->base);
unreg:
scsi_host_put(host);
release:
ecard_release_resources(ec);
out:
return ret;
}
开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:52，代码来源:oak.c
示例10: oakscsi_probe
static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret = -ENOMEM;
ret = ecard_request_resources(ec);
if (ret)
goto out;
host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
if (!host) {
ret = -ENOMEM;
goto release;
}
priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
ecard_resource_len(ec, ECARD_RES_MEMC));
if (!priv(host)->base) {
ret = -ENOMEM;
goto unreg;
}
host->irq = NO_IRQ;
host->n_io_port = 255;
ret = NCR5380_init(host, 0);
if (ret)
goto out_unmap;
NCR5380_maybe_reset_bus(host);
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_exit;
scsi_scan_host(host);
goto out;
out_exit:
NCR5380_exit(host);
out_unmap:
iounmap(priv(host)->base);
unreg:
scsi_host_put(host);
release:
ecard_release_resources(ec);
out:
return ret;
}
开发者ID:020gzh，项目名称:linux，代码行数:49，代码来源:oak.c
示例11: fdomain_config
static int fdomain_config(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
int ret;
char str[22];
struct Scsi_Host *host;
dev_dbg(&link->dev, "fdomain_config\n");
ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
if (ret)
goto failed;
if (!link->irq)
goto failed;
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
/* A bad hack... */
release_region(link->resource[0]->start, resource_size(link->resource[0]));
/* Set configuration options for the fdomain driver */
sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq);
fdomain_setup(str);
host = __fdomain_16x0_detect(&fdomain_driver_template);
if (!host) {
printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
goto failed;
}
if (scsi_add_host(host, NULL))
goto failed;
scsi_scan_host(host);
info->host = host;
return 0;
failed:
fdomain_release(link);
return -ENODEV;
} /* fdomain_config */
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:44，代码来源:fdomain_stub.c
示例12: tcm_loop_driver_probe
static int tcm_loop_driver_probe(struct device *dev)
{
struct tcm_loop_hba *tl_hba;
struct Scsi_Host *sh;
int error, host_prot;
tl_hba = to_tcm_loop_hba(dev);
sh = scsi_host_alloc(&tcm_loop_driver_template,
sizeof(struct tcm_loop_hba));
if (!sh) {
pr_err("Unable to allocate struct scsi_host\n");
return -ENODEV;
}
tl_hba->sh = sh;
/*
* Assign the struct tcm_loop_hba pointer to struct Scsi_Host->hostdata
*/
*((struct tcm_loop_hba **)sh->hostdata) = tl_hba;
/*
* Setup single ID, Channel and LUN for now..
*/
sh->max_id = 2;
sh->max_lun = 0;
sh->max_channel = 0;
sh->max_cmd_len = TL_SCSI_MAX_CMD_LEN;
host_prot = SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION |
SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION |
SHOST_DIX_TYPE2_PROTECTION | SHOST_DIX_TYPE3_PROTECTION;
scsi_host_set_prot(sh, host_prot);
scsi_host_set_guard(sh, SHOST_DIX_GUARD_CRC);
error = scsi_add_host(sh, &tl_hba->dev);
if (error) {
pr_err("%s: scsi_add_host failed\n", __func__);
scsi_host_put(sh);
return -ENODEV;
}
return 0;
}
开发者ID:pombredanne，项目名称:mithrandir，代码行数:43，代码来源:tcm_loop.c
示例13: oakscsi_probe
static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret = -ENOMEM;
host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
if (!host)
goto out;
host->io_port = ecard_address(ec, ECARD_MEMC, 0);
host->irq = IRQ_NONE;
host->n_io_port = 255;
ret = -EBUSY;
if (!request_region (host->io_port, host->n_io_port, "Oak SCSI"))
goto unreg;
NCR5380_init(host, 0);
printk("scsi%d: at port 0x%08lx irqs disabled",
host->host_no, host->io_port);
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
printk("\nscsi%d:", host->host_no);
NCR5380_print_options(host);
printk("\n");
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_release;
scsi_scan_host(host);
goto out;
out_release:
release_region(host->io_port, host->n_io_port);
unreg:
scsi_host_put(host);
out:
return ret;
}
开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:42，代码来源:oak.c
示例14: tcm_loop_driver_probe
static int tcm_loop_driver_probe(struct device *dev)
{
struct tcm_loop_hba *tl_hba;
struct Scsi_Host *sh;
int error;
tl_hba = to_tcm_loop_hba(dev);
sh = scsi_host_alloc(&tcm_loop_driver_template,
sizeof(struct tcm_loop_hba));
if (!sh) {
printk(KERN_ERR "Unable to allocate struct scsi_host\n");
return -ENODEV;
}
tl_hba->sh = sh;
/*
* Assign the struct tcm_loop_hba pointer to struct Scsi_Host->hostdata
*/
*((struct tcm_loop_hba **)sh->hostdata) = tl_hba;
/*
* Setup single ID, Channel and LUN for now..
*/
sh->max_id = 2;
sh->max_lun = 0;
sh->max_channel = 0;
sh->max_cmd_len = TL_SCSI_MAX_CMD_LEN;
error = scsi_add_host(sh, &tl_hba->dev);
if (error) {
printk(KERN_ERR "%s: scsi_add_host failed\n", __func__);
scsi_host_put(sh);
return -ENODEV;
}
return 0;
}
开发者ID:5C4R4B3，项目名称:CINK_SLIM_ICS_Opensource，代码行数:36，代码来源:tcm_loop.c
示例15: amiga_a3000_scsi_probe
static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
{
struct resource *res;
struct Scsi_Host *instance;
int error;
struct a3000_scsiregs *regs;
wd33c93_regs wdregs;
struct a3000_hostdata *hdata;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
return -EBUSY;
instance = scsi_host_alloc(&amiga_a3000_scsi_template,
sizeof(struct a3000_hostdata));
if (!instance) {
error = -ENOMEM;
goto fail_alloc;
}
instance->irq = IRQ_AMIGA_PORTS;
regs = (struct a3000_scsiregs *)ZTWO_VADDR(res->start);
regs->DAWR = DAWR_A3000;
wdregs.SASR = ®s->SASR;
wdregs.SCMD = ®s->SCMD;
hdata = shost_priv(instance);
hdata->wh.no_sync = 0xff;
hdata->wh.fast = 0;
hdata->wh.dma_mode = CTRL_DMA;
hdata->regs = regs;
wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
"A3000 SCSI", instance);
if (error)
goto fail_irq;
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
platform_set_drvdata(pdev, instance);
scsi_scan_host(instance);
return 0;
fail_host:
free_irq(IRQ_AMIGA_PORTS, instance);
fail_irq:
scsi_host_put(instance);
fail_alloc:
release_mem_region(res->start, resource_size(res));
return error;
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:62，代码来源:a3000.c
示例16: zfcp_scsi_forget_cmnds
//.........这里部分代码省略.........
/**
* zfcp_scsi_adapter_register - Register SCSI and FC host with SCSI midlayer
* @adapter: The zfcp adapter to register with the SCSI midlayer
*/
int zfcp_scsi_adapter_register(struct zfcp_adapter *adapter)
{
struct ccw_dev_id dev_id;
if (adapter->scsi_host)
return 0;
ccw_device_get_id(adapter->ccw_device, &dev_id);
/* register adapter as SCSI host with mid layer of SCSI stack */
adapter->scsi_host = scsi_host_alloc(&zfcp_scsi_host_template,
sizeof (struct zfcp_adapter *));
if (!adapter->scsi_host) {
dev_err(&adapter->ccw_device->dev,
"Registering the FCP device with the "
"SCSI stack failed\n");
return -EIO;
}
/* tell the SCSI stack some characteristics of this adapter */
adapter->scsi_host->max_id = 511;
adapter->scsi_host->max_lun = 0xFFFFFFFF;
adapter->scsi_host->max_channel = 0;
adapter->scsi_host->unique_id = dev_id.devno;
adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
adapter->scsi_host->transportt = zfcp_scsi_transport_template;
adapter->scsi_host->hostdata[0] = (unsigned long) adapter;
if (scsi_add_host(adapter->scsi_host, &adapter->ccw_device->dev)) {
scsi_host_put(adapter->scsi_host);
return -EIO;
}
return 0;
}
/**
* zfcp_scsi_adapter_unregister - Unregister SCSI and FC host from SCSI midlayer
* @adapter: The zfcp adapter to unregister.
*/
void zfcp_scsi_adapter_unregister(struct zfcp_adapter *adapter)
{
struct Scsi_Host *shost;
struct zfcp_port *port;
shost = adapter->scsi_host;
if (!shost)
return;
read_lock_irq(&adapter->port_list_lock);
list_for_each_entry(port, &adapter->port_list, list)
port->rport = NULL;
read_unlock_irq(&adapter->port_list_lock);
fc_remove_host(shost);
scsi_remove_host(shost);
scsi_host_put(shost);
adapter->scsi_host = NULL;
}
static struct fc_host_statistics*
开发者ID:AlexShiLucky，项目名称:linux，代码行数:67，代码来源:zfcp_scsi.c
示例17: fdomain_config
static void fdomain_config(dev_link_t *link)
{
client_handle_t handle = link->handle;
scsi_info_t *info = link->priv;
tuple_t tuple;
cisparse_t parse;
int i, last_ret, last_fn;
u_char tuple_data[64];
char str[16];
struct Scsi_Host *host;
DEBUG(0, "fdomain_config(0x%p)\n", link);
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.TupleData = tuple_data;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
link->conf.ConfigBase = parse.config.base;
/* Configure card */
link->state |= DEV_CONFIG;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
while (1) {
if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
goto next_entry;
link->conf.ConfigIndex = parse.cftable_entry.index;
link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
i = pcmcia_request_io(handle, &link->io);
if (i == CS_SUCCESS) break;
next_entry:
CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
/* A bad hack... */
release_region(link->io.BasePort1, link->io.NumPorts1);
/* Set configuration options for the fdomain driver */
sprintf(str, "%d,%d", link->io.BasePort1, link->irq.AssignedIRQ);
fdomain_setup(str);
host = __fdomain_16x0_detect(&fdomain_driver_template);
if (!host) {
printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
goto cs_failed;
}
scsi_add_host(host, NULL); /* XXX handle failure */
scsi_scan_host(host);
sprintf(info->node.dev_name, "scsi%d", host->host_no);
link->dev = &info->node;
info->host = host;
link->state &= ~DEV_CONFIG_PENDING;
return;
cs_failed:
cs_error(link->handle, last_fn, last_ret);
fdomain_release(link);
return;
} /* fdomain_config */
开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:71，代码来源:fdomain_stub.c
示例18: rtsx_probe
static int rtsx_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
{
struct Scsi_Host *host;
struct rtsx_dev *dev;
int err = 0;
struct task_struct *th;
printk(KERN_INFO "--- %s ---\n", DRIVER_MAKE_TIME);
err = pci_enable_device(pci);
if (err < 0) {
printk(KERN_ERR "PCI enable device failed!\n");
return err;
}
err = pci_request_regions(pci, CR_DRIVER_NAME);
if (err < 0) {
printk(KERN_ERR "PCI request regions for %s failed!\n", CR_DRIVER_NAME);
pci_disable_device(pci);
return err;
}
/*
* Ask the SCSI layer to allocate a host structure, with extra
* space at the end for our private rtsx_dev structure.
*/
host = scsi_host_alloc(&rtsx_host_template, sizeof(*dev));
if (!host) {
printk(KERN_ERR "Unable to allocate the scsi host\n");
pci_release_regions(pci);
pci_disable_device(pci);
return -ENOMEM;
}
dev = host_to_rtsx(host);
memset(dev, 0, sizeof(struct rtsx_dev));
dev->chip = (struct rtsx_chip *)kmalloc(sizeof(struct rtsx_chip), GFP_KERNEL);
if (dev->chip == NULL) {
goto errout;
}
memset(dev->chip, 0, sizeof(struct rtsx_chip));
spin_lock_init(&dev->reg_lock);
mutex_init(&(dev->dev_mutex));
sema_init(&(dev->sema), 0);
init_completion(&(dev->notify));
init_waitqueue_head(&dev->delay_wait);
dev->pci = pci;
dev->irq = -1;
printk(KERN_INFO "Resource length: 0x%x\n", (unsigned int)pci_resource_len(pci,0));
dev->addr = pci_resource_start(pci, 0);
dev->remap_addr = ioremap_nocache(dev->addr, pci_resource_len(pci,0));
if (dev->remap_addr == NULL) {
printk(KERN_ERR "ioremap error\n");
err = -ENXIO;
goto errout;
}
printk(KERN_INFO "Original address: 0x%lx, remapped address: 0x%lx\n",
(unsigned long)(dev->addr), (unsigned long)(dev->remap_addr));
dev->rtsx_resv_buf = dma_alloc_coherent(&(pci->dev), RTSX_RESV_BUF_LEN,
&(dev->rtsx_resv_buf_addr), GFP_KERNEL);
if (dev->rtsx_resv_buf == NULL) {
printk(KERN_ERR "alloc dma buffer fail\n");
err = -ENXIO;
goto errout;
}
dev->chip->host_cmds_ptr = dev->rtsx_resv_buf;
dev->chip->host_cmds_addr = dev->rtsx_resv_buf_addr;
dev->chip->host_sg_tbl_ptr = dev->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
dev->chip->host_sg_tbl_addr = dev->rtsx_resv_buf_addr + HOST_CMDS_BUF_LEN;
dev->chip->rtsx = dev;
rtsx_init_options(dev->chip);
printk(KERN_INFO "pci->irq = %d\n", pci->irq);
if (dev->chip->msi_en) {
if (pci_enable_msi(pci) < 0) {
dev->chip->msi_en = 0;
}
}
if (rtsx_acquire_irq(dev) < 0) {
err = -EBUSY;
goto errout;
}
pci_set_master(pci);
synchronize_irq(dev->irq);
err = scsi_add_host(host, &pci->dev);
if (err) {
printk(KERN_ERR "Unable to add the scsi host\n");
goto errout;
//.........这里部分代码省略.........
开发者ID:uran1980，项目名称:RTS5209-linux-driver，代码行数:101，代码来源:rtsx.c
示例19: rtsx_probe
//.........这里部分代码省略.........
if (!dev->remap_addr) {
dev_err(&pci->dev, "ioremap error\n");
err = -ENXIO;
goto errout;
}
/*
* Using "unsigned long" cast here to eliminate gcc warning in
* 64-bit system
*/
dev_info(&pci->dev, "Original address: 0x%lx, remapped address: 0x%lx\n",
(unsigned long)(dev->addr), (unsigned long)(dev->remap_addr));
dev->rtsx_resv_buf = dmam_alloc_coherent(&pci->dev, RTSX_RESV_BUF_LEN,
&dev->rtsx_resv_buf_addr, GFP_KERNEL);
if (!dev->rtsx_resv_buf) {
dev_err(&pci->dev, "alloc dma buffer fail\n");
err = -ENXIO;
goto errout;
}
dev->chip->host_cmds_ptr = dev->rtsx_resv_buf;
dev->chip->host_cmds_addr = dev->rtsx_resv_buf_addr;
dev->chip->host_sg_tbl_ptr = dev->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
dev->chip->host_sg_tbl_addr = dev->rtsx_resv_buf_addr +
HOST_CMDS_BUF_LEN;
dev->chip->rtsx = dev;
rtsx_init_options(dev->chip);
dev_info(&pci->dev, "pci->irq = %d\n", pci->irq);
if (dev->chip->msi_en) {
if (pci_enable_msi(pci) < 0)
dev->chip->msi_en = 0;
}
if (rtsx_acquire_irq(dev) < 0) {
err = -EBUSY;
goto errout;
}
pci_set_master(pci);
synchronize_irq(dev->irq);
rtsx_init_chip(dev->chip);
/*
* set the supported max_lun and max_id for the scsi host
* NOTE: the minimal value of max_id is 1
*/
host->max_id = 1;
host->max_lun = dev->chip->max_lun;
/* Start up our control thread */
th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME);
if (IS_ERR(th)) {
dev_err(&pci->dev, "Unable to start control thread\n");
err = PTR_ERR(th);
goto errout;
}
dev->ctl_thread = th;
err = scsi_add_host(host, &pci->dev);
if (err) {
dev_err(&pci->dev, "Unable to add the scsi host\n");
goto errout;
}
/* Start up the thread for delayed SCSI-device scanning */
th = kthread_run(rtsx_scan_thread, dev, "rtsx-scan");
if (IS_ERR(th)) {
dev_err(&pci->dev, "Unable to start the device-scanning thread\n");
complete(&dev->scanning_done);
quiesce_and_remove_host(dev);
err = PTR_ERR(th);
goto errout;
}
/* Start up the thread for polling thread */
th = kthread_run(rtsx_polling_thread, dev, "rtsx-polling");
if (IS_ERR(th)) {
dev_err(&pci->dev, "Unable to start the device-polling thread\n");
quiesce_and_remove_host(dev);
err = PTR_ERR(th);
goto errout;
}
dev->polling_thread = th;
pci_set_drvdata(pci, dev);
return 0;
/* We come here if there are any problems */
errout:
dev_err(&pci->dev, "rtsx_probe() failed\n");
release_everything(dev);
return err;
}
开发者ID:acton393，项目名称:linux，代码行数:101，代码来源:rtsx.c
示例20: cumanascsi1_probe
static int __devinit
cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret;
ret = ecard_request_resources(ec);
if (ret)
goto out;
host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata));
if (!host) {
ret = -ENOMEM;
goto out_release;
}
priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCSLOW),
ecard_resource_len(ec, ECARD_RES_IOCSLOW));
priv(host)->dma = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
ecard_resource_len(ec, ECARD_RES_MEMC));
if (!priv(host)->base || !priv(host)->dma) {
ret = -ENOMEM;
goto out_unmap;
}
host->irq = ec->irq;
NCR5380_init(host, 0);
priv(host)->ctrl = 0;
writeb(0, priv(host)->base + CTRL);
host->n_io_port = 255;
if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
ret = -EBUSY;
goto out_unmap;
}
ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED,
"CumanaSCSI-1", host);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, host->irq, ret);
goto out_unmap;
}
printk("scsi%d: at port 0x%08lx irq %d",
host->host_no, host->io_port, host->irq);
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE);
printk("\nscsi%d:", host->host_no);
NCR5380_print_options(host);
printk("\n");
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_free_irq;
scsi_scan_host(host);
goto out;
out_free_irq:
free_irq(host->irq, host);
out_unmap:
iounmap(priv(host)->base);
iounmap(priv(host)->dma);
scsi_host_put(host);
out_release:
ecard_release_resources(ec);
out:
return ret;
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:72，代码来源:cumana_1.c
注：本文中的scsi_add_host函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论