C++ screen函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中screen函数的典型用法代码示例。如果您正苦于以下问题：C++ screen函数的具体用法？C++ screen怎么用？C++ screen使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了screen函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: screen

void CUIWindowItem::PositionSelf()
{
	if( m_pWindow )
	{
		CEGUI::MouseCursor& cursor = CEGUI::MouseCursor::getSingleton();
        CEGUI::Rect screen( CEGUI::System::getSingleton().getRenderer()->getRect());
        CEGUI::Rect tipRect( m_pWindow->getUnclippedPixelRect());
        const CEGUI::Image* mouseImage = cursor.getImage();

        CEGUI::Point mousePos(cursor.getPosition());
        CEGUI::Size mouseSz(0,0);

        if (mouseImage)
        {
            mouseSz = mouseImage->getSize();
        }

        CEGUI::Point tmpPos(mousePos.d_x - tipRect.getWidth() - 5, mousePos.d_y - tipRect.getHeight() - 5);
        tipRect.setPosition(tmpPos);

        // if tooltip would be off the right of the screen,
        // reposition to the other side of the mouse cursor.
        if ( tipRect.d_right < 0 )
        {
            tmpPos.d_x = mousePos.d_x + mouseSz.d_width + 5;
        }

        // if tooltip would be off the bottom of the screen,
        // reposition to the other side of the mouse cursor.
        if ( tipRect.d_bottom < 0 )
        {
            tmpPos.d_y = mousePos.d_y + mouseSz.d_height + 5;
        }

        // set final position of tooltip window.
        m_pWindow->setPosition( CEGUI::Absolute, tmpPos);
	}
}

开发者ID:viticm，项目名称:pap_wclinet，代码行数:38，代码来源:UIWindowMng.cpp

示例2: Z80

void sys2900_state::sys2900(machine_config &config)
{
	/* basic machine hardware */
	Z80(config, m_maincpu, XTAL(8'000'000) / 2);
	m_maincpu->set_addrmap(AS_PROGRAM, &sys2900_state::mem_map);
	m_maincpu->set_addrmap(AS_IO, &sys2900_state::io_map);

	/* video hardware */
	screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
	screen.set_refresh_hz(50);
	screen.set_vblank_time(ATTOSECONDS_IN_USEC(2500)); /* not accurate */
	screen.set_size(640, 480);
	screen.set_visarea(0, 640-1, 0, 480-1);
	screen.set_screen_update(FUNC(sys2900_state::screen_update_sys2900));
	screen.set_palette("palette");

	PALETTE(config, "palette", palette_device::MONOCHROME);

	Z80CTC(config, "ctc", 0);
	Z80PIO(config, "pio", 0);
	Z80SIO(config, "sio1", 0);
	Z80SIO(config, "sio2", 0);
}

开发者ID:SailorSat，项目名称:cabmame，代码行数:23，代码来源:sys2900.cpp

示例3: agentWarnInvalidNumArgs

std::string
CommandEventHandler::info(std::vector<std::string>& args)
{
  if (args.size() != 1)
    return agentWarnInvalidNumArgs(1);
  if (args[0].compare("id") == 0)
    return id();
  else if (args[0].compare("os") == 0)
    return os();
  else if (args[0].compare("systime") == 0)
    return systime();
  else if (args[0].compare("uptime") == 0)
    return uptime();
  else if (args[0].compare("uptimemillis") == 0)
    return uptimemillis();
  else if (args[0].compare("screen") == 0)
    return screen();
  else if (args[0].compare("memory") == 0)
    return memory();
  else if (args[0].compare("power") == 0)
    return power();
  return agentWarn("Invalid info subcommand.");
}

开发者ID:malini，项目名称:Negatus，代码行数:23，代码来源:CommandEventHandler.cpp

示例4: Z80

// TODO: Additional machine definition - Master Monty has a different memory layout
void monty_state::monty(machine_config &config)
{
	// Basic machine hardware
	Z80(config, m_maincpu, 3580000);       // Ceramic resonator labeled 3.58MT
	m_maincpu->set_addrmap(AS_PROGRAM, &monty_state::monty_mem);
	m_maincpu->set_addrmap(AS_IO, &monty_state::monty_io);
	m_maincpu->halt_cb().set(FUNC(monty_state::halt_changed));

	// Video hardware
	screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_LCD));
	screen.set_refresh_hz(50);
	screen.set_vblank_time(ATTOSECONDS_IN_USEC(2500)); // Not accurate
	screen.set_size(50, 32); // Two SED1503s (42x16 pixels) control the top and bottom halves
	screen.set_visarea(0, 50-1, 0, 32-1);
	screen.set_screen_update(FUNC(monty_state::lcd_update));

	/* sound hardware */
	SPEAKER(config, "mono").front_center();
	SPEAKER_SOUND(config, m_speaker).add_route(ALL_OUTPUTS, "mono", 0.50);

	// LCD controller interfaces
	SED1520(config, m_sed0).set_screen_update_cb(FUNC(monty_state::screen_update));
}

开发者ID:Octocontrabass，项目名称:mame，代码行数:24，代码来源:monty.cpp

示例5: MC6809E

void cswat_state::cswat(machine_config &config)
{
	/* basic machine hardware */
	MC6809E(config, m_maincpu, XTAL(18'432'000)/3/4); // HD68A09EP, 1.5MHz?
	m_maincpu->set_addrmap(AS_PROGRAM, &cswat_state::cswat_map);
	m_maincpu->set_vblank_int("screen", FUNC(cswat_state::irq0_line_assert));
	m_maincpu->set_periodic_int(FUNC(cswat_state::nmi_handler), attotime::from_hz(300)); // ?

	/* video hardware */
	screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
	screen.set_refresh_hz(60);
	screen.set_vblank_time(ATTOSECONDS_IN_USEC(2500));
	screen.set_size(36*8, 28*8);
	screen.set_visarea_full();
	screen.set_palette("palette");
	screen.set_screen_update(FUNC(cswat_state::screen_update_cswat));

	GFXDECODE(config, "gfxdecode", "palette", gfx_cswat);
	PALETTE(config, "palette").set_entries(4*256);

	/* sound hardware */
	// TODO
}

开发者ID:fesh0r，项目名称:mame-full，代码行数:23，代码来源:cswat.cpp

示例6: FUNC

ROM_END

/***************************************************************************
    FUNCTION PROTOTYPES
***************************************************************************/

//-------------------------------------------------
//  device_add_mconfig - add device configuration
//-------------------------------------------------

void a2bus_videx160_device::device_add_mconfig(machine_config &config)
{
	screen_device &screen(SCREEN(config, ULTRATERM_SCREEN_NAME, SCREEN_TYPE_RASTER));
	screen.set_raw(CLOCK_LOW, 882, 0, 720, 370, 0, 350);
	screen.set_screen_update(ULTRATERM_MC6845_NAME, FUNC(mc6845_device::screen_update));

	MC6845(config, m_crtc, CLOCK_LOW/9);
	m_crtc->set_screen(ULTRATERM_SCREEN_NAME);
	m_crtc->set_show_border_area(false);
	m_crtc->set_char_width(8);
	m_crtc->set_update_row_callback(FUNC(a2bus_videx160_device::crtc_update_row), this);
	m_crtc->out_vsync_callback().set(FUNC(a2bus_videx160_device::vsync_changed));
}

开发者ID:MoochMcGee，项目名称:mame，代码行数:23，代码来源:a2ultraterm.cpp

示例7: sprintf

DIR *CommandMenu::screenopendir(char *m_commandDir,int *dirlen,int olddirlen)
{
    char *p;
    DIR *dir;
    
    if(isRootDir)
    {
	for(p=m_commandDir;*p;p++);  // search end of m_commandDir
	sprintf(p,".%d",screen());   // append screen number
	dir = opendir(m_commandDir);
	if (dir == NULL) {
	    m_commandDir[olddirlen] = '\0'; // strip of screen number
	    *dirlen = olddirlen;
	    dir = opendir(m_commandDir);
	}
    }
    else
    {
	*dirlen = olddirlen;
	dir = opendir(m_commandDir);
    }
    return(dir);
}

开发者ID:bbidulock，项目名称:wmx，代码行数:23，代码来源:Menu.C

示例8: Z80

void microterm_state::mt5510(machine_config &config)
{
	Z80(config, m_maincpu, 6_MHz_XTAL);
	m_maincpu->set_addrmap(AS_PROGRAM, &microterm_state::mt5510_mem_map);
	m_maincpu->set_addrmap(AS_IO, &microterm_state::mt5510_io_map);

	scn2681_device &duart(SCN2681(config, "duart", 3.6864_MHz_XTAL));
	duart.irq_cb().set_inputline(m_maincpu, 0);
	duart.outport_cb().set("eeprom1", FUNC(eeprom_serial_93cxx_device::di_write)).bit(6);
	duart.outport_cb().append("eeprom2", FUNC(eeprom_serial_93cxx_device::di_write)).bit(5);
	duart.outport_cb().append("eeprom1", FUNC(eeprom_serial_93cxx_device::cs_write)).bit(4);
	duart.outport_cb().append("eeprom2", FUNC(eeprom_serial_93cxx_device::cs_write)).bit(4);
	duart.outport_cb().append("eeprom1", FUNC(eeprom_serial_93cxx_device::clk_write)).bit(3);
	duart.outport_cb().append("eeprom2", FUNC(eeprom_serial_93cxx_device::clk_write)).bit(3);

	EEPROM_93C46_16BIT(config, "eeprom1").do_callback().set("duart", FUNC(scn2681_device::ip6_w));

	EEPROM_93C46_16BIT(config, "eeprom2").do_callback().set("duart", FUNC(scn2681_device::ip5_w));

	screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
	screen.set_raw(45.8304_MHz_XTAL / 2, 1120, 0, 960, 341, 0, 300); // wild guess at resolution
	screen.set_screen_update(FUNC(microterm_state::mt5510_update));
}

开发者ID:MASHinfo，项目名称:mame，代码行数:23，代码来源:microterm.cpp

示例9: main

/*===========================================================================*/
int main( int argc, char** argv )
{
    kvs::glut::Application app( argc, argv );

    /* Read volume data from the specified data file. If the data file is not
     * specified, tornado volume data is created by using kvs::TornadoVolumeData class.
     */
    kvs::StructuredVolumeObject* object = NULL;
    if ( argc > 1 ) object = new kvs::StructuredVolumeImporter( std::string( argv[1] ) );
    else            object = new kvs::TornadoVolumeData( kvs::Vector3ui( 8, 8, 8 ) );

    if ( !object )
    {
        kvsMessageError( "Cannot create a structured volume object." );
        return false;
    }

    // Create a diamond glyph renderer.
    kvs::DiamondGlyph* glyph = new kvs::DiamondGlyph();
    if ( !glyph )
    {
        kvsMessageError( "Cannot creat an diamond glyph.");
        return false;
    }

    // Set properties.
    const kvs::TransferFunction transfer_function( 256 );
    glyph->setTransferFunction( transfer_function );

    kvs::glut::Screen screen( &app );
    screen.registerObject( object, glyph );
    screen.setGeometry( 0, 0, 512, 512 );
    screen.setTitle( "kvs::DiamondGlyph" );
    screen.show();

    return app.run();
}

开发者ID:digirea，项目名称:KVS，代码行数:38，代码来源:main.cpp

示例10: main

int main(int argc, char *argv[])
{

    QApplication app(argc, argv);
    QSplashScreen screen(QPixmap(":/images/chargement.png"));
    screen.show();
    app.processEvents();

    //Traduction des boutons
    QString locale = QLocale::system().name().section('_', 0, 0);
    QTranslator translator;
    translator.load(QString("qt_") + locale, QLibraryInfo::location(QLibraryInfo::TranslationsPath));
    app.installTranslator(&translator);
    
    //-----------------------------------------------------
    // Vérification de l'existence d'une autre instance
    //-----------------------------------------------------
    app.setApplicationName("Dadaword");
    QSharedMemory sharedMemory(app.applicationName());
    
    // On vérifie à la création de cette zone mémoire si celle-ci existe
    if(sharedMemory.create(sizeof(int))==false){
        QMessageBox::warning(0, QObject::tr("Programme en cours d'exécution"), QObject::tr("Dadaword est déjà en cours d'exécution.  Veuillez fermer l'instance ouverte avant de le lance à nouveau."));
        //exit(EXIT_SUCCESS);
    }

    DadaWord instance;

    //Création de l'interface utilisateur
    instance.createUI();

    //Affichage
    instance.show();
    screen.finish(&instance);

    return app.exec();
}

开发者ID:chindit，项目名称:dadaword，代码行数:37，代码来源:main.cpp

示例11: M6502

void pokechmp_state::pokechmp(machine_config &config)
{
	/* basic machine hardware */
	M6502(config, m_maincpu, 4_MHz_XTAL/4);
	m_maincpu->set_addrmap(AS_PROGRAM, &pokechmp_state::pokechmp_map);

	M6502(config, m_audiocpu, 4_MHz_XTAL/4);
	m_audiocpu->set_addrmap(AS_PROGRAM, &pokechmp_state::pokechmp_sound_map);

	/* video hardware */
	screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
	screen.set_refresh_hz(60);
	screen.set_vblank_time(ATTOSECONDS_IN_USEC(0));
	screen.set_size(32*8, 32*8);
	screen.set_visarea(0*8, 32*8-1, 2*8, 30*8-1);
	screen.set_screen_update(FUNC(pokechmp_state::screen_update_pokechmp));
	screen.set_palette(m_palette);
	screen.screen_vblank().set_inputline(m_maincpu, INPUT_LINE_NMI);
	screen.screen_vblank().append(FUNC(pokechmp_state::sound_irq));

	GFXDECODE(config, m_gfxdecode, m_palette, gfx_pokechmp);
	PALETTE(config, m_palette).set_format(palette_device::xBGR_555, 0x400);

	/* sound hardware */
	SPEAKER(config, "mono").front_center();

	GENERIC_LATCH_8(config, m_soundlatch);

	YM2203(config, "ym1", XTAL(4'000'000)/4).add_route(ALL_OUTPUTS, "mono", 0.60);

	YM3812(config, "ym2", XTAL(24'000'000)/16).add_route(ALL_OUTPUTS, "mono", 1.0);

	okim6295_device &oki(OKIM6295(config, "oki", XTAL(24'000'000)/16, okim6295_device::PIN7_LOW));
	oki.add_route(ALL_OUTPUTS, "mono", 0.50); /* sound fx */
	oki.add_route(ALL_OUTPUTS, "mono", 0.50);
	oki.set_addrmap(0, &pokechmp_state::pokechmp_oki_map);
}

开发者ID:fesh0r，项目名称:mame-full，代码行数:37，代码来源:pokechmp.cpp

示例12: screen

    void Tooltip::positionSelf(void)
    {
        MouseCursor& cursor = MouseCursor::getSingleton();
        Rect screen(Vector2(0, 0), System::getSingleton().getRenderer()->getDisplaySize());
        Rect tipRect(getUnclippedOuterRect());
        const Image* mouseImage = cursor.getImage();

        Point mousePos(cursor.getPosition());
        Size mouseSz(0,0);

        if (mouseImage)
        {
            mouseSz = mouseImage->getSize();
        }

        Point tmpPos(mousePos.d_x + mouseSz.d_width, mousePos.d_y + mouseSz.d_height);
        tipRect.setPosition(tmpPos);

        // if tooltip would be off the right of the screen,
        // reposition to the other side of the mouse cursor.
        if (screen.d_right < tipRect.d_right)
        {
            tmpPos.d_x = mousePos.d_x - tipRect.getWidth() - 5;
        }

        // if tooltip would be off the bottom of the screen,
        // reposition to the other side of the mouse cursor.
        if (screen.d_bottom < tipRect.d_bottom)
        {
            tmpPos.d_y = mousePos.d_y - tipRect.getHeight() - 5;
        }

        // set final position of tooltip window.
        setPosition(
            UVector2(cegui_absdim(tmpPos.d_x),
                     cegui_absdim(tmpPos.d_y)));
    }

开发者ID:Ocerus，项目名称:Ocerus，代码行数:37，代码来源:CEGUITooltip.cpp

示例13: Z80

void calorie_state::calorie(machine_config &config)
{
	/* basic machine hardware */
	Z80(config, m_maincpu, 4000000);         /* 4 MHz */
	m_maincpu->set_addrmap(AS_PROGRAM, &calorie_state::calorie_map);
	m_maincpu->set_addrmap(AS_OPCODES, &calorie_state::decrypted_opcodes_map);
	m_maincpu->set_vblank_int("screen", FUNC(calorie_state::irq0_line_hold));

	z80_device &audiocpu(Z80(config, "audiocpu", 3000000));        /* 3 MHz */
	audiocpu.set_addrmap(AS_PROGRAM, &calorie_state::calorie_sound_map);
	audiocpu.set_addrmap(AS_IO, &calorie_state::calorie_sound_io_map);
	audiocpu.set_periodic_int(FUNC(calorie_state::irq0_line_hold), attotime::from_hz(64));


	/* video hardware */
	screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
	screen.set_refresh_hz(60);
	screen.set_vblank_time(ATTOSECONDS_IN_USEC(0));
	screen.set_size(256, 256);
	screen.set_visarea(0, 256-1, 16, 256-16-1);
	screen.set_screen_update(FUNC(calorie_state::screen_update_calorie));
	screen.set_palette(m_palette);

	GFXDECODE(config, m_gfxdecode, m_palette, gfx_calorie);
	PALETTE(config, m_palette).set_format(palette_device::xBGR_444, 0x100);

	/* sound hardware */
	SPEAKER(config, "mono").front_center();

	GENERIC_LATCH_8(config, m_soundlatch);

	YM2149(config, "ay1", 1500000).add_route(ALL_OUTPUTS, "mono", 0.8);

	YM2149(config, "ay2", 1500000).add_route(ALL_OUTPUTS, "mono", 0.8);

	YM2149(config, "ay3", 1500000).add_route(ALL_OUTPUTS, "mono", 0.8);
}

开发者ID:fesh0r，项目名称:mame-full，代码行数:37，代码来源:calorie.cpp

示例14: D_INTERNAL

void ParameterWindow::_constrainToScreen() {
    D_INTERNAL(("ParameterWindow::_constrainToScreen()\n"));

    BScreen screen(this);
    BRect screenRect = screen.Frame();
    BRect windowRect = Frame();

    // if the window is outside the screen rect
    // move it to the default position
    if (!screenRect.Intersects(windowRect)) {
        windowRect.OffsetTo(screenRect.LeftTop());
        MoveTo(windowRect.LeftTop());
        windowRect = Frame();
    }

    // if the window is larger than the screen rect
    // resize it to fit at each side
    if (!screenRect.Contains(windowRect)) {
        if (windowRect.left < screenRect.left) {
            windowRect.left = screenRect.left + 5.0;
            MoveTo(windowRect.LeftTop());
            windowRect = Frame();
        }
        if (windowRect.top < screenRect.top) {
            windowRect.top = screenRect.top + 5.0;
            MoveTo(windowRect.LeftTop());
            windowRect = Frame();
        }
        if (windowRect.right > screenRect.right) {
            windowRect.right = screenRect.right - 5.0;
        }
        if (windowRect.bottom > screenRect.bottom) {
            windowRect.bottom = screenRect.bottom - 5.0;
        }
        ResizeTo(windowRect.Width(), windowRect.Height());
    }
}

开发者ID:nielx，项目名称:haiku-serviceskit，代码行数:37，代码来源:ParameterWindow.cpp

示例15: _SetRect

void
PreviewView::Update(const BRect* rect, BBitmap* bitmap)
{
	if (Window() == NULL || Window()->IsHidden())
		return;

	if (rect != NULL)
		_SetRect(*rect);

	bigtime_t now = system_time();
	if (bitmap == NULL) {
		// Avoid updating preview too often
		if (fTimeStamp + 50000 >= now)
			return;
		BScreen screen(Window());
		screen.GetBitmap(&bitmap, false, &fCoordRect);
	}
	if (bitmap != NULL) {
		BRect destRect;
		BRect bitmapBounds = bitmap->Bounds();
		BRect viewBounds = fBitmapView->Bounds();
		if (BRectRatio(viewBounds) >= BRectRatio(bitmapBounds)) {
			float overlap = BRectHorizontalOverlap(viewBounds, bitmapBounds);
			destRect.Set(-overlap, 0, viewBounds.Width() + overlap,
						viewBounds.Height());
		} else {
			float overlap = BRectVerticalOverlap(viewBounds, bitmapBounds);
			destRect.Set(0, -overlap, viewBounds.Width(), viewBounds.Height() + overlap);
		}
		fTimeStamp = now;
		fBitmapView->SetViewBitmap(bitmap,
			bitmap->Bounds().OffsetToCopy(B_ORIGIN),
			destRect,
			B_FOLLOW_TOP|B_FOLLOW_LEFT, B_FILTER_BITMAP_BILINEAR);
		Invalidate();
	}
}

开发者ID:jackburton79，项目名称:bescreencapture，代码行数:37，代码来源:PreviewView.cpp

示例16: BRawContact

PersonWindow*
TPeopleApp::_NewWindow(const entry_ref* ref, BFile* file)
{
	BRawContact* rawContact;
	if (file == NULL)
		rawContact = new BRawContact(B_CONTACT_FORMAT);
	else
		rawContact = new BRawContact(B_CONTACT_ANY, file);

	BContact* contact = new BContact(rawContact);

	if (contact->InitCheck() != B_OK) {
		BAlert *alert = new BAlert("Alert",
			B_TRANSLATE("Contact initialization failed!."),"OK");
		alert->Go();
		return NULL;
	}

	PersonWindow* window = new PersonWindow(fPosition,
		B_TRANSLATE("New contact"), ref, file, contact);

	window->Show();
	window->Activate(true);

	fWindowCount++;

	// Offset the position for the next window which will be opened and
	// reset it if it would open outside the screen bounds.
	fPosition.OffsetBy(20, 20);
	BScreen screen(window);
	if (fPosition.bottom > screen.Frame().bottom)
		fPosition.OffsetTo(fPosition.left, TITLE_BAR_HEIGHT);
	if (fPosition.right > screen.Frame().right)
		fPosition.OffsetTo(6, fPosition.top);

	return window;
}

开发者ID:Barrett17，项目名称:haiku-contacts-kit-old，代码行数:37，代码来源:PeopleApp.cpp

示例17: M68000

void dim68k_state::dim68k(machine_config &config)
{
	/* basic machine hardware */
	M68000(config, m_maincpu, XTAL(10'000'000));
	m_maincpu->set_addrmap(AS_PROGRAM, &dim68k_state::dim68k_mem);

	/* video hardware */
	screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
	screen.set_refresh_hz(50);
	screen.set_vblank_time(ATTOSECONDS_IN_USEC(2500)); /* not accurate */
	screen.set_screen_update("crtc", FUNC(mc6845_device::screen_update));
	screen.set_size(640, 480);
	screen.set_visarea(0, 640-1, 0, 250-1);
	PALETTE(config, m_palette, palette_device::MONOCHROME);
	GFXDECODE(config, "gfxdecode", m_palette, gfx_dim68k);

	/* sound hardware */
	SPEAKER(config, "mono").front_center();
	SPEAKER_SOUND(config, m_speaker).add_route(ALL_OUTPUTS, "mono", 0.50);

	/* Devices */
	UPD765A(config, "fdc", 8'000'000, true, true); // these options unknown
	FLOPPY_CONNECTOR(config, "fdc:0", dim68k_floppies, "525hd", floppy_image_device::default_floppy_formats);
	FLOPPY_CONNECTOR(config, "fdc:1", dim68k_floppies, "525hd", floppy_image_device::default_floppy_formats);

	MC6845(config, m_crtc, 1790000);
	m_crtc->set_screen("screen");
	m_crtc->set_show_border_area(false);
	m_crtc->set_char_width(8);
	m_crtc->set_update_row_callback(FUNC(dim68k_state::crtc_update_row), this);

	generic_keyboard_device &keyboard(GENERIC_KEYBOARD(config, "keyboard", 0));
	keyboard.set_keyboard_callback(FUNC(dim68k_state::kbd_put));

	// software lists
	SOFTWARE_LIST(config, "flop_list").set_original("dim68k");
}

开发者ID:fesh0r，项目名称:mame-full，代码行数:37，代码来源:dim68k.cpp

示例18: screen

bool PointRenderer::Hits(const RenderState &inState)
{
    UserPoint screen(inState.mClipRect.x, inState.mClipRect.y);

    Extent2DF extent;
    CachedExtentRenderer::GetExtent(inState.mTransform,extent);
    if (!extent.Contains(screen))
        return false;

    UserPoint hit_test = inState.mTransform.mMatrix->ApplyInverse(screen);
    if (inState.mTransform.mScale9->Active())
    {
        hit_test.x = inState.mTransform.mScale9->InvTransX(hit_test.x);
        hit_test.y = inState.mTransform.mScale9->InvTransY(hit_test.y);
    }

    for(int i=0; i<mTransformed.size(); i++)
    {
        const UserPoint &point = mTransformed[i];
        if ( fabs(point.x-screen.x) < 1 && fabs(point.y-screen.y) < 1 )
            return true;
    }
    return false;
}

开发者ID:AdamHarte，项目名称:NME，代码行数:24，代码来源:PointRenderer.cpp

示例19: main

int main()
{
    strstream str;
    AFileIOStream screen(&cout), file(&str, &str);
    MyObject obj0, obj1;

    obj0.setCount(5);
    obj0.setName("This is my name");

//  obj0.debugDump(cerr, 0x0);
//  obj1.debugDump(cerr, 0x0);

    file << obj0;
    file >> obj1;

    if (obj0.compare(obj1))
    {
        cerr << "\r\nUnequal after serialization\r\n" << endl;
    }

    for (int iT = 0x0; iT < 512; ++iT)
    {
        obj1.setCount(iT);
        file << obj1;
        file >> obj0;
//    obj0.debugDump(cerr, 0x0);
//    obj1.debugDump(cerr, 0x0);
        if (obj0.compare(obj1))
        {
            cerr << "\r\nComparisson failed\r\n" << endl;
        }
    }


    return 0x0;
}

开发者ID:achacha，项目名称:AOS，代码行数:36，代码来源:tObjectSerialize.cpp

示例20: main

int main(void) {
//Initialisation
	consoleDemoInit();
	screen();
//Programme
	while(1){
		touchPosition touchXY;
		touchRead(&touchXY);
		if((touchXY.px==0x00)&&(touchXY.py==0x00)){
			menu();
		}
		if((touchXY.px>0x50)&&(touchXY.py>0x24)&&(touchXY.px<0xA6)&&(touchXY.py<0x45)){
			clear();
			touch();
			clear();
		}
		if((touchXY.px>0x50)&&(touchXY.py>0x5B)&&(touchXY.px<0xA6)&&(touchXY.py<0x7D)){
			clear();
			input();
			clear();
		}
	}
	return 0;
}

开发者ID:Allex0295，项目名称:ExposeConsole，代码行数:24，代码来源:MainConsole.cpp

注：本文中的screen函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ screenManager函数代码示例发布时间：2022-05-30

C++ scr_readw函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19165|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ screen函数代码示例

示例1: screen

示例2: Z80

示例3: agentWarnInvalidNumArgs

示例4: Z80

示例5: MC6809E

示例6: FUNC

示例7: sprintf

示例8: Z80

示例9: main

示例10: main

示例11: M6502

示例12: screen

示例13: Z80

示例14: D_INTERNAL

示例15: _SetRect

示例16: BRawContact

示例17: M68000

示例18: screen

示例19: main

示例20: main

请发表评论

全部评论

上一篇：

下一篇：

开馄饨加盟店要提前做好哪些工作？

solegalli/feature-selection-for-machine-

PHP(TP5)获取微信小程序unionId

win7系统重装系统初始设置的操作方法

Piiloblondie/MATSuMoTo: MATLAB Surrogate

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053