• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ sched_getaffinity函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中sched_getaffinity函数的典型用法代码示例。如果您正苦于以下问题:C++ sched_getaffinity函数的具体用法?C++ sched_getaffinity怎么用?C++ sched_getaffinity使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了sched_getaffinity函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: set_cpu_affinity

int set_cpu_affinity(pid_t pid, unsigned long new_mask)
{
	unsigned long cur_mask;
	unsigned int len = sizeof(new_mask);

	if (sched_getaffinity(pid, len, (cpu_set_t *) &cur_mask) < 0) {
		perror("sched_getaffinity");
		return -1;
	}
	printf("pid %d's old affinity: %08lx\n", pid, cur_mask);

	if (sched_setaffinity(pid, len, (cpu_set_t *) &new_mask)) {
		perror("sched_setaffinity");
		return -1;
	}

	if (sched_getaffinity(pid, len, (cpu_set_t *) &cur_mask) < 0) {
		perror("sched_getaffinity");
		return -1;
	}
	printf(" pid %d's new affinity: %08lx\n", pid, cur_mask);
    return 0;
}
开发者ID:msf,项目名称:configs,代码行数:23,代码来源:cpu_bind.c


示例2: main

int main(int argc, char **argv)
{
	int opt;
	bool do_suspend = true;
	bool succeeded = true;
	cpu_set_t available_cpus;
	int err;
	int cpu;

	ksft_print_header();

	while ((opt = getopt(argc, argv, "n")) != -1) {
		switch (opt) {
		case 'n':
			do_suspend = false;
			break;
		default:
			printf("Usage: %s [-n]\n", argv[0]);
			printf("        -n: do not trigger a suspend/resume cycle before the test\n");
			return -1;
		}
	}

	if (do_suspend)
		suspend();

	err = sched_getaffinity(0, sizeof(available_cpus), &available_cpus);
	if (err < 0)
		ksft_exit_fail_msg("sched_getaffinity() failed\n");

	for (cpu = 0; cpu < CPU_SETSIZE; cpu++) {
		bool test_success;

		if (!CPU_ISSET(cpu, &available_cpus))
			continue;

		test_success = run_test(cpu);
		if (test_success) {
			ksft_test_result_pass("CPU %d\n", cpu);
		} else {
			ksft_test_result_fail("CPU %d\n", cpu);
			succeeded = false;
		}
	}

	if (succeeded)
		ksft_exit_pass();
	else
		ksft_exit_fail();
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:50,代码来源:step_after_suspend_test.c


示例3: affinity_processGetProcessorId

int
affinity_processGetProcessorId()
{
    int ret;
    cpu_set_t cpu_set;
    CPU_ZERO(&cpu_set);
    ret = sched_getaffinity(getpid(),sizeof(cpu_set_t), &cpu_set);

    if (ret < 0)
    {
        ERROR;
    }

    return getProcessorID(&cpu_set);
}
开发者ID:gbfree,项目名称:likwid,代码行数:15,代码来源:affinity.c


示例4: set_affinity

/*
******************************************************************************
SUBROUTINE: set_affinity

Set this process to run on the input processor number.
The processor numbers start with 0 going to N-1 processors.
******************************************************************************
*/
int set_affinity(int processor)
{
extern int sched_getaffinity();
extern int sched_setaffinity();

unsigned long new_mask;

   unsigned int len = sizeof(new_mask);
   unsigned long cur_mask;
   pid_t p = 0;
   int ret;

   new_mask = 1<<(processor);

  //printf("set_affinity: %ld\n",new_mask);

   ret = sched_getaffinity(p, len, &cur_mask);
  // printf("sched_getaffinity = %d, cur_mask = %08lx\n",ret,cur_mask);
   if(ret != 0) abort();

   ret = sched_setaffinity(p, len, &new_mask);
  // printf("sched_setaffinity = %d, new_mask = %08lx\n",ret,new_mask);
   if(ret != 0) abort();

   ret = sched_getaffinity(p, len, &cur_mask);
  // printf("sched_getaffinity = %d, cur_mask = %08lx\n",ret,cur_mask);
   if(ret != 0) abort();
   if(cur_mask != new_mask)
   {
      printf("affinity did not get set! exiting\n");
      exit(-1);
   }
   fflush(stdout);

   return 0;
}
开发者ID:petermilne,项目名称:ks-2G-4G-llc,代码行数:44,代码来源:testrtmode.c


示例5: CPU_ZERO

/**
 * \brief Get CPU affinity
 *
 * Example of usage:
 * \code
 * std::vector<bool> v (2);
 * getAffinity(&v);
 * std::cout << "Affinity: " << v[0] << " " << v[1] << std::endl;
 * \endcode
 * @param v: vector of booleans containing the current affinity (true/false)
 * @exception std::runtime_error in case affinity cannot be get
 */
void Process::getAffinity(std::vector<bool>* v)
{
	cpu_set_t s;
	CPU_ZERO(&s);

	if ((sched_getaffinity(pid_, sizeof(s), &s) != 0))
		throw std::runtime_error ("Get affinity error");

        for (unsigned int j = 0; (j < CPU_SETSIZE) && (j < v->size()); ++j) {
		if (CPU_ISSET(j, &s))
			(*v)[j] = true;
		else
		(*v)[j] = false;
	}
}
开发者ID:ksergy1,项目名称:OnPosix,代码行数:27,代码来源:Process.cpp


示例6: get_process_cpu_affinity

/*
 * Return process CPU affinity as a Python long (the bitmask)
 */
static PyObject*
get_process_cpu_affinity(PyObject* self, PyObject* args)
{
    unsigned long mask;
    unsigned int len = sizeof(mask);
    long pid;

    if (!PyArg_ParseTuple(args, "i", &pid)) {
        return NULL;
    }
    if (sched_getaffinity(pid, len, (cpu_set_t *)&mask) < 0) {
        return PyErr_SetFromErrno(PyExc_OSError);
    }
    return Py_BuildValue("l", mask);
}
开发者ID:AshishNamdev,项目名称:mozilla-central,代码行数:18,代码来源:_psutil_linux.c


示例7: showCurCpu

void showCurCpu(int cpuNum) {
    cpu_set_t get;
    CPU_ZERO(&get);
    //if (pthread_getaffinity_np(pthread_self(), sizeof(get), &get) == -1) {
    if (sched_getaffinity(0, sizeof(get), &get) == -1) {
        printf("warning: cound not get cpu affinity\n");
        exit(1);
    }

    for (int i = 0; i < cpuNum; i++) {
        if (CPU_ISSET(i, &get)) {
            printf("this process %d is running processor : %d\n", getpid(), i);
        }
    }
}
开发者ID:killwing,项目名称:mytests,代码行数:15,代码来源:main.cpp


示例8: conf_sched

static void conf_sched(void)
{
	cpu_set_t set;
	int res, i;

	CPU_ZERO(&set);
	res = sched_getaffinity(0, sizeof(set), &set);
	if (res < 0)
		die("sched_getaffinity");
	for (i = 0; i < 256; i++) {
		if (!CPU_ISSET(i, &set))
			continue;
		printf("allowed cpu: %d\n", i);
	}
}
开发者ID:clcarwin,项目名称:mdrotor,代码行数:15,代码来源:mdrotor.c


示例9: gettid

void *func_nonrt(void *arg)
{
	Thread *pthr = (Thread *) arg;
	int rc, i, j, policy, tid = gettid();
	struct sched_param schedp;
	cpu_set_t mask;
	CPU_ZERO(&mask);
	CPU_SET(0, &mask);

	rc = sched_setaffinity(0, sizeof(mask), &mask);
	if (rc < 0) {
		printf("Thread %d: Can't set affinity: %d %s\n", tid, rc,
		       strerror(rc));
		exit(-1);
	}
	rc = sched_getaffinity(0, sizeof(mask), &mask);

	printf("Thread started %d on CPU %ld\n", pthr->priority,
	       (long)mask.__bits[0]);
	pthread_getschedparam(pthr->pthread, &policy, &schedp);
	printf("Thread running %d\n", pthr->priority);

	while (1) {
		pthread_mutex_lock(&glob_mutex);
		printf
		    ("Thread %d at start pthread pol %d pri %d - Got global lock\n",
		     pthr->priority, policy, schedp.sched_priority);
		sleep(2);
		for (i = 0; i < 10000; i++) {
			if ((i % 100) == 0) {
				sched_getparam(tid, &schedp);
				policy = sched_getscheduler(tid);
				printf("Thread %d(%d) loop %d pthread pol %d "
				       "pri %d\n", tid, pthr->priority, i,
				       policy, schedp.sched_priority);
				fflush(NULL);
			}
			pthr->id++;
			for (j = 0; j < 5000; j++) {
				pthread_mutex_lock(&(pthr->mutex));
				pthread_mutex_unlock(&(pthr->mutex));
			}
		}
		pthread_mutex_unlock(&glob_mutex);
		sched_yield();
	}
	return NULL;
}
开发者ID:kraj,项目名称:ltp,代码行数:48,代码来源:testpi-3.c


示例10: tegra_cache_smc

static void tegra_cache_smc(bool enable, u32 arg)
{
	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
	bool need_affinity_switch;
	bool can_switch_affinity;
	bool l2x0_enabled;
	cpumask_t local_cpu_mask;
	cpumask_t saved_cpu_mask;
	unsigned long flags;
	long ret;

	/*
	 * ISSUE : Some registers of PL310 controler must be written
	 *              from Secure context (and from CPU0)!
	 *
	 * When called form Normal we obtain an abort or do nothing.
	 * Instructions that must be called in Secure:
	 *      - Write to Control register (L2X0_CTRL==0x100)
	 *      - Write in Auxiliary controler (L2X0_AUX_CTRL==0x104)
	 *      - Invalidate all entries (L2X0_INV_WAY==0x77C),
	 *              mandatory at boot time.
	 *      - Tag and Data RAM Latency Control Registers
	 *              (0x108 & 0x10C) must be written in Secure.
	 */
	need_affinity_switch = (smp_processor_id() != 0);
	can_switch_affinity = !irqs_disabled();

	WARN_ON(need_affinity_switch && !can_switch_affinity);
	if (need_affinity_switch && can_switch_affinity) {
		cpu_set(0, local_cpu_mask);
		sched_getaffinity(0, &saved_cpu_mask);
		ret = sched_setaffinity(0, &local_cpu_mask);
		WARN_ON(ret != 0);
	}

	local_irq_save(flags);
	l2x0_enabled = readl_relaxed(p + L2X0_CTRL) & 1;
	if (enable && !l2x0_enabled)
		tegra_generic_smc(0xFFFFF100, 0x00000001, arg);
	else if (!enable && l2x0_enabled)
		tegra_generic_smc(0xFFFFF100, 0x00000002, arg);
	local_irq_restore(flags);

	if (need_affinity_switch && can_switch_affinity) {
		ret = sched_setaffinity(0, &saved_cpu_mask);
		WARN_ON(ret != 0);
	}
}
开发者ID:binkybear,项目名称:kangaroo,代码行数:48,代码来源:common.c


示例11: sched_getaffinity

/*
 * getCPUMask
 */
uint64 CPProcess::getCPUMask()
{
	uint64 cpuMask = 1;

#ifdef __USE_GNU
	sint res = sched_getaffinity(getpid(), sizeof(uint64), (cpu_set_t*)&cpuMask);

	if (res)
	{
		nlwarning("sched_getaffinity() returned %d, errno = %d: %s", res, errno, strerror(errno));
		return 0;
	}
#endif // __USE_GNU

	return cpuMask;
}
开发者ID:Darkhunter,项目名称:Tranquillien-HCRP-Project-using-NeL,代码行数:19,代码来源:p_thread.cpp


示例12: get_cpu_count

int get_cpu_count()
{
    cpu_set_t cpu_mask;

    CPU_ZERO(&cpu_mask);
    int err = sched_getaffinity(0, sizeof(cpu_set_t), &cpu_mask);
	if (err) {
		LOG_ERROR << "sched_getaffinity failed\n";
		exit(1);
	}

    int count = CPU_COUNT(&cpu_mask);
    printf("%d\n", count);
    
    return count;
}
开发者ID:moloned,项目名称:sparsex,代码行数:16,代码来源:Affinity.cpp


示例13: get_cpunum

int get_cpunum()
{
    int num = 0;

#ifdef __linux__
    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);
    sched_getaffinity(0, sizeof(cpuset), &cpuset);
    for (int i = 0; i < 32; i++)
    {
        if (CPU_ISSET(i, &cpuset))
            num++;
    }
#endif
    return num;
}
开发者ID:YuchongHu,项目名称:memc3,代码行数:16,代码来源:memc3_util.c


示例14: CPU_ZERO

int32 FLinuxMisc::NumberOfCores()
{
	cpu_set_t AvailableCpusMask;
	CPU_ZERO(&AvailableCpusMask);

	if (0 != sched_getaffinity(0, sizeof(AvailableCpusMask), &AvailableCpusMask))
	{
		return 1;	// we are running on something, right?
	}

	char FileNameBuffer[1024];
	unsigned char PossibleCores[CPU_SETSIZE] = { 0 };

	for(int32 CpuIdx = 0; CpuIdx < CPU_SETSIZE; ++CpuIdx)
	{
		if (CPU_ISSET(CpuIdx, &AvailableCpusMask))
		{
			sprintf(FileNameBuffer, "/sys/devices/system/cpu/cpu%d/topology/core_id", CpuIdx);
			
			FILE* CoreIdFile = fopen(FileNameBuffer, "r");
			unsigned int CoreId = 0;
			if (CoreIdFile)
			{
				if (1 != fscanf(CoreIdFile, "%d", &CoreId))
				{
					CoreId = 0;
				}
				fclose(CoreIdFile);
			}

			if (CoreId >= ARRAY_COUNT(PossibleCores))
			{
				CoreId = 0;
			}
			
			PossibleCores[ CoreId ] = 1;
		}
	}

	int32 NumCoreIds = 0;
	for(int32 Idx = 0; Idx < ARRAY_COUNT(PossibleCores); ++Idx)
	{
		NumCoreIds += PossibleCores[Idx];
	}

	return NumCoreIds;
}
开发者ID:Tigrouzen,项目名称:UnrealEngine-4,代码行数:47,代码来源:LinuxPlatformMisc.cpp


示例15: cwGetCPUaffinity

//-----------------------------------------------------------------------------
// Return CPU affinity in a form suitable for messages.  Single CPU affinity
// returns a non-negative integer CPU number.  Multi CPU affinity returns the
// negative of the bit mask of affine CPUs.  Affinity to no CPUs returns -1.
//----------------------------------------------------------------------------
int32_t cwGetCPUaffinity(void) {
  int numCPU = sysconf( _SC_NPROCESSORS_CONF );
  cpu_set_t af;
  int32_t i, afmask = 0, afcount = 0, afCPU=-1;

  sched_getaffinity(0, sizeof(af), &af);

  for (i=0; i<numCPU; ++i) {
    if (CPU_ISSET(i, &af)) {
      afCPU = i;
      afmask |= (1 << i);
      afcount++;
    }
  }
  if (afcount <= 1) return afCPU;
  else return -afmask;
}
开发者ID:HPCNow,项目名称:supermagic,代码行数:22,代码来源:cw_util.c


示例16: processor_get_num

int processor_get_num(void){
	int number=0;
	cpu_set_t cpus;

	// Returns number of processors available to process (based on affinity mask)
	if( sched_getaffinity(0, sizeof(cpus), (cpu_set_t*) &cpus) < 0) {
		number = -1;
		CPU_ZERO( &cpus );
	}

	for (unsigned i = 0; i < sizeof(cpus)*8; i++) {
		if( CPU_ISSET( i, &cpus )) {
			number++;
		}
	}
	return number;
}
开发者ID:egraldlo,项目名称:TestTra,代码行数:17,代码来源:processor_num.cpp


示例17: allocforncores

static runconfig * allocforncores(void)
{
	const unsigned ncoresmax = 128;
	const unsigned cslen = CPU_ALLOC_SIZE(ncoresmax);
	printf("assuming no more than %u cores. set length = %u\n",
		ncoresmax, cslen);

	cpu_set_t * coreset = CPU_ALLOC(ncoresmax);

	if(coreset && !sched_getaffinity(getpid(), cslen, coreset)) { } else
	{
		fail("can't get current affinity");
	}
	
	const int ncores = CPU_COUNT_S(cslen, coreset);

	if(ncores) { } else
	{
		fail("don't know how to work on 0 cores\n");
	}

	runconfig *const cfg =
		malloc(sizeof(runconfig)
			+ sizeof(unsigned) * (ncores - 1));

	if(cfg) { } else
	{
		fail("can't allocate memory for config structure");
	}

	cfg->ncores = ncores;

	unsigned cc = 0; // current core
	for(unsigned i = 0; cc < ncores; i += 1)
	{
		if(CPU_ISSET_S(i, cslen, coreset))
		{
			cfg->corelist[cc] = i;
			cc += 1;
		}
	}

	free(coreset);

	return cfg;
}
开发者ID:coda,项目名称:thread-proc,代码行数:46,代码来源:config.c


示例18: gettid

void *start_task(void *data)
{
    struct thread *thr = (struct thread *)data;
    long id = (long) thr->arg;
    thread_pids[id] = gettid();
    unsigned long long start_time;
    int ret;
    int high = 0;
    cpu_set_t cpumask;
    cpu_set_t save_cpumask;
    int cpu = 0;
    unsigned long l;
    long pid;

    ret = sched_getaffinity(0, sizeof(save_cpumask), &save_cpumask);
    if (ret < 0)
        debug(DBG_ERR, "sched_getaffinity failed: %s\n", strerror(ret));

    pid = gettid();

    /* Check if we are the highest prio task */
    if (id == nr_tasks-1)
        high = 1;

    while (!done) {
        if (high) {
            /* rotate around the CPUS */
            if (!CPU_ISSET(cpu, &save_cpumask))
                cpu = 0;
            CPU_ZERO(&cpumask);
            CPU_SET(cpu, &cpumask);
            cpu++;
            sched_setaffinity(0, sizeof(cpumask), &cpumask);
        }
        pthread_barrier_wait(&start_barrier);
        start_time = rt_gettime();
        ftrace_write("Thread %d: started %lld diff %lld\n",
                     pid, start_time, start_time - now);
        l = busy_loop(start_time);
        record_time(id, start_time / NS_PER_US, l);
        pthread_barrier_wait(&end_barrier);
    }

    return (void *)pid;
}
开发者ID:ystk,项目名称:debian-ltp,代码行数:45,代码来源:rt-migrate.c


示例19: do_test

static int
do_test (void)
{
  cpu_set_t cs;
  if (sched_getaffinity (getpid (), sizeof (cs), &cs) != 0)
    {
      printf ("getaffinity failed: %m\n");
      return 1;
    }

  int result = 0;
  int cpu = 0;
  while (CPU_COUNT (&cs) != 0)
    {
      if (CPU_ISSET (cpu, &cs))
	{
	  cpu_set_t cs2;
	  CPU_ZERO (&cs2);
	  CPU_SET (cpu, &cs2);
	  if (sched_setaffinity (getpid (), sizeof (cs2), &cs2) != 0)
	    {
	      printf ("setaffinity(%d) failed: %m\n", cpu);
	      result = 1;
	    }
	  else
	    {
	      int cpu2 = sched_getcpu ();
	      if (cpu2 == -1 && errno == ENOSYS)
		{
		  puts ("getcpu syscall not implemented");
		  return 0;
		}
	      if (cpu2 != cpu)
		{
		  printf ("getcpu results %d not possible\n", cpu2);
		  result = 1;
		}
	    }
	  CPU_CLR (cpu, &cs);
	}
      ++cpu;
    }

  return result;
}
开发者ID:Akheon23,项目名称:chromecast-mirrored-source.toolchain,代码行数:45,代码来源:tst-getcpu.c


示例20: CPU_COUNT

// get the number of CPUs available to the current process
boost::optional<unsigned long> ProcessInfo::getNumAvailableCores() {
    cpu_set_t set;

    if (sched_getaffinity(0, sizeof(cpu_set_t), &set) == 0) {
#ifdef CPU_COUNT  // glibc >= 2.6 has CPU_COUNT defined
        return CPU_COUNT(&set);
#else
        unsigned long count = 0;
        for (size_t i = 0; i < CPU_SETSIZE; i++)
            if (CPU_ISSET(i, &set))
                count++;
        if (count > 0)
            return count;
#endif
    }

    return boost::none;
}
开发者ID:Machyne,项目名称:mongo,代码行数:19,代码来源:processinfo_linux.cpp



注:本文中的sched_getaffinity函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ sched_getcpu函数代码示例发布时间:2022-05-30
下一篇:
C++ sched_get_priority_min函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap