C++ sca_in函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sca_in函数的典型用法代码示例。如果您正苦于以下问题：C++ sca_in函数的具体用法？C++ sca_in怎么用？C++ sca_in使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sca_in函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: c101_ioctl

static int c101_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
	const size_t size = sizeof(sync_serial_settings);
	sync_serial_settings new_line;
	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
	port_t *port = dev_to_port(dev);

#ifdef DEBUG_RINGS
	if (cmd == SIOCDEVPRIVATE) {
		sca_dump_rings(dev);
		printk(KERN_DEBUG "MSCI1: ST: %02x %02x %02x %02x\n",
		       sca_in(MSCI1_OFFSET + ST0, port),
		       sca_in(MSCI1_OFFSET + ST1, port),
		       sca_in(MSCI1_OFFSET + ST2, port),
		       sca_in(MSCI1_OFFSET + ST3, port));
		return 0;
	}
#endif
	if (cmd != SIOCWANDEV)
		return hdlc_ioctl(dev, ifr, cmd);

	switch(ifr->ifr_settings.type) {
	case IF_GET_IFACE:
		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
		if (ifr->ifr_settings.size < size) {
			ifr->ifr_settings.size = size; /* data size wanted */
			return -ENOBUFS;
		}
		if (copy_to_user(line, &port->settings, size))
			return -EFAULT;
		return 0;

	case IF_IFACE_SYNC_SERIAL:
		if(!capable(CAP_NET_ADMIN))
			return -EPERM;

		if (copy_from_user(&new_line, line, size))
			return -EFAULT;

		if (new_line.clock_type != CLOCK_EXT &&
		    new_line.clock_type != CLOCK_TXFROMRX &&
		    new_line.clock_type != CLOCK_INT &&
		    new_line.clock_type != CLOCK_TXINT)
		return -EINVAL;	/* No such clock setting */

		if (new_line.loopback != 0 && new_line.loopback != 1)
			return -EINVAL;

		memcpy(&port->settings, &new_line, size); /* Update settings */
		c101_set_iface(port);
		return 0;

	default:
		return hdlc_ioctl(dev, ifr, cmd);
	}
}

开发者ID:E-LLP，项目名称:n900，代码行数:56，代码来源:c101.c

示例2: sca_tx_done

/* Transmit DMA service */
static inline void sca_tx_done(port_t *port)
{
	struct net_device *dev = port->netdev;
	card_t* card = port->card;
	u8 stat;

	spin_lock(&port->lock);

	stat = sca_in(DSR_TX(port->chan), card); /* read DMA Status */

	/* Reset DSR status bits */
	sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
		DSR_TX(port->chan), card);

	while (1) {
		pkt_desc __iomem *desc = desc_address(port, port->txlast, 1);
		u8 stat = readb(&desc->stat);

		if (!(stat & ST_TX_OWNRSHP))
			break; /* not yet transmitted */
		if (stat & ST_TX_UNDRRUN) {
			dev->stats.tx_errors++;
			dev->stats.tx_fifo_errors++;
		} else {
			dev->stats.tx_packets++;
			dev->stats.tx_bytes += readw(&desc->len);
		}
		writeb(0, &desc->stat);	/* Free descriptor */
		port->txlast = (port->txlast + 1) % card->tx_ring_buffers;
	}

	netif_wake_queue(dev);
	spin_unlock(&port->lock);
}

开发者ID:STS-Dev-Team，项目名称:kernel_mapphone_kexec，代码行数:35，代码来源:hd64572.c

示例3: sca_tx_intr

/* Transmit DMA interrupt service */
static inline void sca_tx_intr(port_t *port)
{
	struct net_device *dev = port_to_dev(port);
	u16 dmac = get_dmac_tx(port);
	card_t* card = port_to_card(port);
	u8 stat;

	spin_lock(&port->lock);

	stat = sca_in(DSR_TX(phy_node(port)), card); /* read DMA Status */

	/* Reset DSR status bits */
	sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
		DSR_TX(phy_node(port)), card);

	while (1) {
		pkt_desc __iomem *desc;

		u32 desc_off = desc_offset(port, port->txlast, 1);
		u32 cda = sca_inw(dmac + CDAL, card);
		if ((cda >= desc_off) && (cda < desc_off + sizeof(pkt_desc)))
			break;	/* Transmitter is/will_be sending this frame */

		desc = desc_address(port, port->txlast, 1);
		dev->stats.tx_packets++;
		dev->stats.tx_bytes += readw(&desc->len);
		writeb(0, &desc->stat);	/* Free descriptor */
		port->txlast = next_desc(port, port->txlast, 1);
	}

	netif_wake_queue(dev);
	spin_unlock(&port->lock);
}

开发者ID:020gzh，项目名称:linux，代码行数:34，代码来源:hd64570.c

示例4: set_carrier

static inline void set_carrier(port_t *port)
{
	if (!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD))
		netif_carrier_on(port_to_dev(port));
	else
		netif_carrier_off(port_to_dev(port));
}

开发者ID:E-LLP，项目名称:n900，代码行数:7，代码来源:c101.c

示例5: sca_set_port

static void sca_set_port(port_t *port)
{
	card_t* card = port_to_card(port);
	u16 msci = get_msci(port);
	u8 md2 = sca_in(msci + MD2, card);
	unsigned int tmc, br = 10, brv = 1024;


	if (port->settings.clock_rate > 0) {
		/* Try lower br for better accuracy*/
		do {
			br--;
			brv >>= 1; /* brv = 2^9 = 512 max in specs */

			/* Baud Rate = CLOCK_BASE / TMC / 2^BR */
			tmc = CLOCK_BASE / brv / port->settings.clock_rate;
		}while (br > 1 && tmc <= 128);

		if (tmc < 1) {
			tmc = 1;
			br = 0;	/* For baud=CLOCK_BASE we use tmc=1 br=0 */
			brv = 1;
		} else if (tmc > 255)
			tmc = 256; /* tmc=0 means 256 - low baud rates */

		port->settings.clock_rate = CLOCK_BASE / brv / tmc;
	} else {

开发者ID:020gzh，项目名称:linux，代码行数:27，代码来源:hd64570.c

示例6: sca_set_port

static void sca_set_port(port_t *port)
{
    card_t* card = port_to_card(port);
    u16 msci = get_msci(port);
    u8 md2 = sca_in(msci + MD2, card);
    unsigned int tmc, br = 10, brv = 1024;


    if (port->settings.clock_rate > 0) {

        do {
            br--;
            brv >>= 1;


            tmc = CLOCK_BASE / brv / port->settings.clock_rate;
        } while (br > 1 && tmc <= 128);

        if (tmc < 1) {
            tmc = 1;
            br = 0;
            brv = 1;
        } else if (tmc > 255)
            tmc = 256;

        port->settings.clock_rate = CLOCK_BASE / brv / tmc;
    } else {

开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:27，代码来源:hd64570.c

示例7: sca_msci_intr

/* MSCI interrupt service */
static inline void sca_msci_intr(port_t *port)
{
	u16 msci = get_msci(port);
	card_t* card = port_to_card(port);
	u8 stat = sca_in(msci + ST1, card); /* read MSCI ST1 status */

	/* Reset MSCI TX underrun and CDCD status bit */
	sca_out(stat & (ST1_UDRN | ST1_CDCD), msci + ST1, card);

	if (stat & ST1_UDRN) {
		struct net_device_stats *stats = hdlc_stats(port_to_dev(port));
		stats->tx_errors++; /* TX Underrun error detected */
		stats->tx_fifo_errors++;
	}

	if (stat & ST1_CDCD)
		hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD),
				 port_to_dev(port));
}

开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:20，代码来源:hd6457x.c

示例8: sca_msci_intr

static void sca_msci_intr(port_t *port)
{
	u8 stat = sca_in(MSCI0_OFFSET + ST1, port); /* read MSCI ST1 status */

	/* Reset MSCI TX underrun and CDCD (ignored) status bit */
	sca_out(stat & (ST1_UDRN | ST1_CDCD), MSCI0_OFFSET + ST1, port);

	if (stat & ST1_UDRN) {
		/* TX Underrun error detected */
		port_to_dev(port)->stats.tx_errors++;
		port_to_dev(port)->stats.tx_fifo_errors++;
	}

	stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI1 ST1 status */
	/* Reset MSCI CDCD status bit - uses ch#2 DCD input */
	sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);

	if (stat & ST1_CDCD)
		set_carrier(port);
}

开发者ID:E-LLP，项目名称:n900，代码行数:20，代码来源:c101.c

示例9: sca_msci_intr

/* MSCI interrupt service */
static inline void sca_msci_intr(port_t *port)
{
	u16 msci = get_msci(port);
	card_t* card = port->card;

	if (sca_in(msci + ST1, card) & ST1_CDCD) {
		/* Reset MSCI CDCD status bit */
		sca_out(ST1_CDCD, msci + ST1, card);
		sca_set_carrier(port);
	}
}

开发者ID:STS-Dev-Team，项目名称:kernel_mapphone_kexec，代码行数:12，代码来源:hd64572.c

示例10: sca_rx_done

/* Receive DMA service */
static inline int sca_rx_done(port_t *port, int budget)
{
	struct net_device *dev = port->netdev;
	u16 dmac = get_dmac_rx(port);
	card_t *card = port->card;
	u8 stat = sca_in(DSR_RX(port->chan), card); /* read DMA Status */
	int received = 0;

	/* Reset DSR status bits */
	sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
		DSR_RX(port->chan), card);

	if (stat & DSR_BOF)
		/* Dropped one or more frames */
		dev->stats.rx_over_errors++;

	while (received < budget) {
		u32 desc_off = hd_desc_offset(port, port->rxin, 0);
		pkt_desc __iomem *desc;
		u32 cda = sca_inl(dmac + CDAL, card);

		if ((cda >= desc_off) && (cda < desc_off + sizeof(pkt_desc)))
			break;	/* No frame received */

		desc = desc_address(port, port->rxin, 0);
		stat = readb(&desc->stat);
		if (!(stat & ST_RX_EOM))
			port->rxpart = 1; /* partial frame received */
		else if ((stat & ST_ERROR_MASK) || port->rxpart) {
			dev->stats.rx_errors++;
			if (stat & ST_RX_OVERRUN)
				dev->stats.rx_fifo_errors++;
			else if ((stat & (ST_RX_SHORT | ST_RX_ABORT |
					  ST_RX_RESBIT)) || port->rxpart)
				dev->stats.rx_frame_errors++;
			else if (stat & ST_RX_CRC)
				dev->stats.rx_crc_errors++;
			if (stat & ST_RX_EOM)
				port->rxpart = 0; /* received last fragment */
		} else {
			sca_rx(card, port, desc, port->rxin);
			received++;
		}

		/* Set new error descriptor address */
		sca_outl(desc_off, dmac + EDAL, card);
		port->rxin = (port->rxin + 1) % card->rx_ring_buffers;
	}

	/* make sure RX DMA is enabled */
	sca_out(DSR_DE, DSR_RX(port->chan), card);
	return received;
}

开发者ID:STS-Dev-Team，项目名称:kernel_mapphone_kexec，代码行数:54，代码来源:hd64572.c

示例11: sca_intr_status

static inline int sca_intr_status(card_t *card)
{
	u8 result = 0;
	u8 isr0 = sca_in(ISR0, card);
	u8 isr1 = sca_in(ISR1, card);

	if (isr1 & 0x03) result |= SCA_INTR_DMAC_RX(0);
	if (isr1 & 0x0C) result |= SCA_INTR_DMAC_TX(0);
	if (isr1 & 0x30) result |= SCA_INTR_DMAC_RX(1);
	if (isr1 & 0xC0) result |= SCA_INTR_DMAC_TX(1);
	if (isr0 & 0x0F) result |= SCA_INTR_MSCI(0);
	if (isr0 & 0xF0) result |= SCA_INTR_MSCI(1);

	if (!(result & SCA_INTR_DMAC_TX(0)))
		if (sca_in(DSR_TX(0), card) & DSR_EOM)
			result |= SCA_INTR_DMAC_TX(0);
	if (!(result & SCA_INTR_DMAC_TX(1)))
		if (sca_in(DSR_TX(1), card) & DSR_EOM)
			result |= SCA_INTR_DMAC_TX(1);

	return result;
}

开发者ID:020gzh，项目名称:linux，代码行数:22，代码来源:hd64570.c

示例12: sca_rx_intr

/* Receive DMA interrupt service */
static inline void sca_rx_intr(port_t *port)
{
	struct net_device *dev = port_to_dev(port);
	u16 dmac = get_dmac_rx(port);
	card_t *card = port_to_card(port);
	u8 stat = sca_in(DSR_RX(phy_node(port)), card); /* read DMA Status */

	/* Reset DSR status bits */
	sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
		DSR_RX(phy_node(port)), card);

	if (stat & DSR_BOF)
		/* Dropped one or more frames */
		dev->stats.rx_over_errors++;

	while (1) {
		u32 desc_off = desc_offset(port, port->rxin, 0);
		pkt_desc __iomem *desc;
		u32 cda = sca_inw(dmac + CDAL, card);

		if ((cda >= desc_off) && (cda < desc_off + sizeof(pkt_desc)))
			break;	/* No frame received */

		desc = desc_address(port, port->rxin, 0);
		stat = readb(&desc->stat);
		if (!(stat & ST_RX_EOM))
			port->rxpart = 1; /* partial frame received */
		else if ((stat & ST_ERROR_MASK) || port->rxpart) {
			dev->stats.rx_errors++;
			if (stat & ST_RX_OVERRUN)
				dev->stats.rx_fifo_errors++;
			else if ((stat & (ST_RX_SHORT | ST_RX_ABORT |
					  ST_RX_RESBIT)) || port->rxpart)
				dev->stats.rx_frame_errors++;
			else if (stat & ST_RX_CRC)
				dev->stats.rx_crc_errors++;
			if (stat & ST_RX_EOM)
				port->rxpart = 0; /* received last fragment */
		} else
			sca_rx(card, port, desc, port->rxin);

		/* Set new error descriptor address */
		sca_outw(desc_off, dmac + EDAL, card);
		port->rxin = next_desc(port, port->rxin, 0);
	}

	/* make sure RX DMA is enabled */
	sca_out(DSR_DE, DSR_RX(phy_node(port)), card);
}

开发者ID:020gzh，项目名称:linux，代码行数:50，代码来源:hd64570.c

示例13: sca_rx_intr

static inline void sca_rx_intr(port_t *port)
{
    struct net_device *dev = port_to_dev(port);
    u16 dmac = get_dmac_rx(port);
    card_t *card = port_to_card(port);
    u8 stat = sca_in(DSR_RX(phy_node(port)), card);


    sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
            DSR_RX(phy_node(port)), card);

    if (stat & DSR_BOF)

        dev->stats.rx_over_errors++;

    while (1) {
        u32 desc_off = desc_offset(port, port->rxin, 0);
        pkt_desc __iomem *desc;
        u32 cda = sca_inw(dmac + CDAL, card);

        if ((cda >= desc_off) && (cda < desc_off + sizeof(pkt_desc)))
            break;

        desc = desc_address(port, port->rxin, 0);
        stat = readb(&desc->stat);
        if (!(stat & ST_RX_EOM))
            port->rxpart = 1;
        else if ((stat & ST_ERROR_MASK) || port->rxpart) {
            dev->stats.rx_errors++;
            if (stat & ST_RX_OVERRUN)
                dev->stats.rx_fifo_errors++;
            else if ((stat & (ST_RX_SHORT | ST_RX_ABORT |
                              ST_RX_RESBIT)) || port->rxpart)
                dev->stats.rx_frame_errors++;
            else if (stat & ST_RX_CRC)
                dev->stats.rx_crc_errors++;
            if (stat & ST_RX_EOM)
                port->rxpart = 0;
        } else
            sca_rx(card, port, desc, port->rxin);


        sca_outw(desc_off, dmac + EDAL, card);
        port->rxin = next_desc(port, port->rxin, 0);
    }


    sca_out(DSR_DE, DSR_RX(phy_node(port)), card);
}

开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:49，代码来源:hd64570.c

示例14: sca_intr_status

static inline int sca_intr_status(card_t *card)
{
	u8 result = 0;

#ifdef __HD64570_H /* HD64570 */
	u8 isr0 = sca_in(ISR0, card);
	u8 isr1 = sca_in(ISR1, card);

	if (isr1 & 0x03) result |= SCA_INTR_DMAC_RX(0);
	if (isr1 & 0x0C) result |= SCA_INTR_DMAC_TX(0);
	if (isr1 & 0x30) result |= SCA_INTR_DMAC_RX(1);
	if (isr1 & 0xC0) result |= SCA_INTR_DMAC_TX(1);
	if (isr0 & 0x0F) result |= SCA_INTR_MSCI(0);
	if (isr0 & 0xF0) result |= SCA_INTR_MSCI(1);

#else /* HD64572 */
	u32 isr0 = sca_inl(ISR0, card);

	if (isr0 & 0x0000000F) result |= SCA_INTR_DMAC_RX(0);
	if (isr0 & 0x000000F0) result |= SCA_INTR_DMAC_TX(0);
	if (isr0 & 0x00000F00) result |= SCA_INTR_DMAC_RX(1);
	if (isr0 & 0x0000F000) result |= SCA_INTR_DMAC_TX(1);
	if (isr0 & 0x003E0000) result |= SCA_INTR_MSCI(0);
	if (isr0 & 0x3E000000) result |= SCA_INTR_MSCI(1);

#endif /* HD64570 vs HD64572 */

	if (!(result & SCA_INTR_DMAC_TX(0)))
		if (sca_in(DSR_TX(0), card) & DSR_EOM)
			result |= SCA_INTR_DMAC_TX(0);
	if (!(result & SCA_INTR_DMAC_TX(1)))
		if (sca_in(DSR_TX(1), card) & DSR_EOM)
			result |= SCA_INTR_DMAC_TX(1);

	return result;
}

开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:36，代码来源:hd6457x.c

示例15: sca_set_carrier

static inline void sca_set_carrier(port_t *port)
{
	if (!(sca_in(get_msci(port) + ST3, port_to_card(port)) & ST3_DCD)) {
#ifdef DEBUG_LINK
		printk(KERN_DEBUG "%s: sca_set_carrier on\n",
		       port_to_dev(port)->name);
#endif
		netif_carrier_on(port_to_dev(port));
	} else {
#ifdef DEBUG_LINK
		printk(KERN_DEBUG "%s: sca_set_carrier off\n",
		       port_to_dev(port)->name);
#endif
		netif_carrier_off(port_to_dev(port));
	}
}

开发者ID:020gzh，项目名称:linux，代码行数:16，代码来源:hd64570.c

示例16: sca_msci_intr

static inline void sca_msci_intr(port_t *port)
{
    u16 msci = get_msci(port);
    card_t* card = port_to_card(port);
    u8 stat = sca_in(msci + ST1, card);


    sca_out(stat & (ST1_UDRN | ST1_CDCD), msci + ST1, card);

    if (stat & ST1_UDRN) {

        port_to_dev(port)->stats.tx_errors++;
        port_to_dev(port)->stats.tx_fifo_errors++;
    }

    if (stat & ST1_CDCD)
        sca_set_carrier(port);
}

开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:18，代码来源:hd64570.c

示例17: sca_msci_intr

/* MSCI interrupt service */
static inline void sca_msci_intr(port_t *port)
{
	u16 msci = get_msci(port);
	card_t* card = port_to_card(port);
	u8 stat = sca_in(msci + ST1, card); /* read MSCI ST1 status */

	/* Reset MSCI TX underrun and CDCD status bit */
	sca_out(stat & (ST1_UDRN | ST1_CDCD), msci + ST1, card);

	if (stat & ST1_UDRN) {
		/* TX Underrun error detected */
		port_to_dev(port)->stats.tx_errors++;
		port_to_dev(port)->stats.tx_fifo_errors++;
	}

	if (stat & ST1_CDCD)
		sca_set_carrier(port);
}

开发者ID:020gzh，项目名称:linux，代码行数:19，代码来源:hd64570.c

示例18: sca_init_sync_port

static void sca_init_sync_port(port_t *port)
{
	card_t *card = port_to_card(port);
	int transmit, i;

	port->rxin = 0;
	port->txin = 0;
	port->txlast = 0;

#if !defined(PAGE0_ALWAYS_MAPPED) && !defined(ALL_PAGES_ALWAYS_MAPPED)
	openwin(card, 0);
#endif

	for (transmit = 0; transmit < 2; transmit++) {
		u16 dmac = transmit ? get_dmac_tx(port) : get_dmac_rx(port);
		u16 buffs = transmit ? card->tx_ring_buffers
			: card->rx_ring_buffers;

		for (i = 0; i < buffs; i++) {
			pkt_desc __iomem *desc = desc_address(port, i, transmit);
			u16 chain_off = desc_offset(port, i + 1, transmit);
			u32 buff_off = buffer_offset(port, i, transmit);

			writea(chain_off, &desc->cp);
			writel(buff_off, &desc->bp);
			writew(0, &desc->len);
			writeb(0, &desc->stat);
		}

		/* DMA disable - to halt state */
		sca_out(0, transmit ? DSR_TX(phy_node(port)) :
			DSR_RX(phy_node(port)), card);
		/* software ABORT - to initial state */
		sca_out(DCR_ABORT, transmit ? DCR_TX(phy_node(port)) :
			DCR_RX(phy_node(port)), card);

#ifdef __HD64570_H
		sca_out(0, dmac + CPB, card); /* pointer base */
#endif
		/* current desc addr */
		sca_outa(desc_offset(port, 0, transmit), dmac + CDAL, card);
		if (!transmit)
			sca_outa(desc_offset(port, buffs - 1, transmit),
				 dmac + EDAL, card);
		else
			sca_outa(desc_offset(port, 0, transmit), dmac + EDAL,
				 card);

		/* clear frame end interrupt counter */
		sca_out(DCR_CLEAR_EOF, transmit ? DCR_TX(phy_node(port)) :
			DCR_RX(phy_node(port)), card);

		if (!transmit) { /* Receive */
			/* set buffer length */
			sca_outw(HDLC_MAX_MRU, dmac + BFLL, card);
			/* Chain mode, Multi-frame */
			sca_out(0x14, DMR_RX(phy_node(port)), card);
			sca_out(DIR_EOME | DIR_BOFE, DIR_RX(phy_node(port)),
				card);
			/* DMA enable */
			sca_out(DSR_DE, DSR_RX(phy_node(port)), card);
		} else {	/* Transmit */
			/* Chain mode, Multi-frame */
			sca_out(0x14, DMR_TX(phy_node(port)), card);
			/* enable underflow interrupts */
			sca_out(DIR_BOFE, DIR_TX(phy_node(port)), card);
		}
	}

	hdlc_set_carrier(!(sca_in(get_msci(port) + ST3, card) & ST3_DCD),
			 port_to_dev(port));
}

开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:72，代码来源:hd6457x.c

注：本文中的sca_in函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sca_out函数代码示例发布时间：2022-05-30

C++ sc_transmit_apdu函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19165|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ sca_in函数代码示例

示例1: c101_ioctl

示例2: sca_tx_done

示例3: sca_tx_intr

示例4: set_carrier

示例5: sca_set_port

示例6: sca_set_port

示例7: sca_msci_intr

示例8: sca_msci_intr

示例9: sca_msci_intr

示例10: sca_rx_done

示例11: sca_intr_status

示例12: sca_rx_intr

示例13: sca_rx_intr

示例14: sca_intr_status

示例15: sca_set_carrier

示例16: sca_msci_intr

示例17: sca_msci_intr

示例18: sca_init_sync_port

请发表评论

全部评论

上一篇：

下一篇：

开馄饨加盟店要提前做好哪些工作？

solegalli/feature-selection-for-machine-

PHP(TP5)获取微信小程序unionId

win7系统重装系统初始设置的操作方法

Piiloblondie/MATSuMoTo: MATLAB Surrogate

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053