• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ saveSettings函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中saveSettings函数的典型用法代码示例。如果您正苦于以下问题：C++ saveSettings函数的具体用法？C++ saveSettings怎么用？C++ saveSettings使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了saveSettings函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: saveSettings

void ofxTimeMeasurements::_appExited(ofEventArgs &e){
	saveSettings();
}
开发者ID:herjunodimas，项目名称:ofxTimeMeasurements，代码行数:3，代码来源:ofxTimeMeasurements.cpp


示例2: parse_command

void parse_command(int connfd, CControld::Header * rmessage)
{
	
	if(rmessage->version != CControld::ACTVERSION)
	{
		perror("[controld] wrong version\n");
		return;
	}

	switch (rmessage->cmd)
	{
	case CControld::CMD_SHUTDOWN:
		shutdownBox();
		break;

	case CControld::CMD_SAVECONFIG:
		saveSettings();
		break;

	case CControld::CMD_SETVOLUME:
	case CControld::CMD_SETVOLUME_AVS:
		CControld::commandVolume msg_commandVolume;
		read(connfd, &msg_commandVolume, sizeof(msg_commandVolume));

		if (rmessage->cmd == CControld::CMD_SETVOLUME)
		{
			settings.volume = msg_commandVolume.volume;
			config->setInt32("volume", settings.volume);
			zapit.setVolume(map_volume(msg_commandVolume.volume, false), map_volume(msg_commandVolume.volume, false));
		}
		else
		{
			settings.volume_avs = msg_commandVolume.volume;
			config->setInt32("volume_avs", settings.volume_avs);
			audioControl::setVolume(map_volume(msg_commandVolume.volume, true));
		}
		lcdd.setVolume(msg_commandVolume.volume);
		eventServer->sendEvent(CControldClient::EVT_VOLUMECHANGED, CEventServer::INITID_CONTROLD, &msg_commandVolume.volume, sizeof(msg_commandVolume.volume));
		break;

	case CControld::CMD_MUTE:
		settings.mute = true;
		config->setBool("mute", settings.mute);
		zapit.muteAudio(true);
		lcdd.setMute(true);
		eventServer->sendEvent(CControldClient::EVT_MUTECHANGED, CEventServer::INITID_CONTROLD, &settings.mute, sizeof(settings.mute));
		break;
	case CControld::CMD_MUTE_AVS:
		settings.mute_avs = true;
		config->setBool("mute_avs", settings.mute_avs);
		audioControl::setMute(true);
		lcdd.setMute(true);
		eventServer->sendEvent(CControldClient::EVT_MUTECHANGED, CEventServer::INITID_CONTROLD, &settings.mute_avs, sizeof(settings.mute_avs));
		break;
	case CControld::CMD_UNMUTE:
		settings.mute = false;
		config->setBool("mute", settings.mute);
		zapit.muteAudio(false);
		lcdd.setMute(settings.mute_avs);
		eventServer->sendEvent(CControldClient::EVT_MUTECHANGED, CEventServer::INITID_CONTROLD, &settings.mute_avs, sizeof(settings.mute_avs));
		break;
	case CControld::CMD_UNMUTE_AVS:
		settings.mute_avs = false;
		config->setBool("mute_avs", settings.mute_avs);
		audioControl::setMute(false);
		lcdd.setMute(settings.mute);
		eventServer->sendEvent(CControldClient::EVT_MUTECHANGED, CEventServer::INITID_CONTROLD, &settings.mute, sizeof(settings.mute));
		break;

		case CControld::CMD_SETANALOGMODE:
			CControld::commandAnalogMode msgmd;
			read(connfd, &msgmd, sizeof(msgmd));
			zapit.setAudioMode(msgmd.mode);
			break;
		case CControld::CMD_SETVIDEOFORMAT:
			//printf("[controld] set videoformat\n");
			CControld::commandVideoFormat msg2;
			read(connfd, &msg2, sizeof(msg2));
			setVideoFormat(msg2.format);
			break;
		case CControld::CMD_SETVIDEOOUTPUT:
			//printf("[controld] set videooutput\n");
			CControld::commandVideoOutput msg3;
			read(connfd, &msg3, sizeof(msg3));
			setvideooutput(msg3.output);
			break;
		case CControld::CMD_SETBOXTYPE:
			//printf("[controld] set boxtype\n");    //-------------------dummy!!!!!!!!!!
			CControld::commandBoxType msg4;
			read(connfd, &msg4, sizeof(msg4));
			setBoxType();
			break;
		case CControld::CMD_SETSCARTMODE:
			//printf("[controld] set scartmode\n");
			CControld::commandScartMode msg5;
			read(connfd, &msg5, sizeof(msg5));
			setScartMode(msg5.mode);
			break;
		case CControld::CMD_SETVIDEOPOWERDOWN:
			//printf("[controld] set scartmode\n");
//.........这里部分代码省略.........
开发者ID:GWARDAR，项目名称:OpenPLi-1，代码行数:101，代码来源:controld.cpp


示例3: doProfileAutoSelect

void doProfileAutoSelect()
{
	g_autoSelectProfile = !g_autoSelectProfile;
	::SendMessage(nppData._nppHandle, NPPM_SETMENUITEMCHECK, funcItem[g_fiAutoProfile]._cmdID, g_autoSelectProfile ? TRUE : FALSE);
	saveSettings();
}
开发者ID:bruderstein，项目名称:ZenCoding-Python，代码行数:6，代码来源:ZenCoding-Python.cpp


示例4: saveSettings

void Application::delItemFavorite(int idx)
{
    favModel->delItemFavorite(idx);

    saveSettings();
}
开发者ID:giapdangle，项目名称:calaos_mobile，代码行数:6，代码来源:Application.cpp


示例5: saveSettings

/**
 * @brief edit::on_pushButton_clicked handler for save button
 */
void edit::on_pushButton_clicked()
{
    saveSettings();
    this->close();
    dashb->show();
}
开发者ID:Leonmey，项目名称:CS3307-Data-Visualization-Tool，代码行数:9，代码来源:edit.cpp


示例6: QSettings

void Settings::loadSettings(QString name)
{
    _settings = new QSettings("QDChat_", name);
    saveSettings(name);
}
开发者ID:D3MONIQDev，项目名称:qdchat，代码行数:5，代码来源:settings.cpp


示例7: saveSettings

void MainWindow::closeEvent( QCloseEvent *event )
{
    saveSettings();
}
开发者ID:yangguang-ecnu，项目名称:fibernavigator2，代码行数:4，代码来源:mainwindow.cpp


示例8: saveSettings

	void Application::destroyScene()
	{
		saveSettings();

		StateManager::getInstance().rollbackToState(nullptr);

		GridManager::getInstance().shutdown();
		delete GridManager::getInstancePtr();

		PropertyFieldManager::getInstance().shutdown();
		delete PropertyFieldManager::getInstancePtr();

		EditorToolTip::getInstance().shutdown();
		delete EditorToolTip::getInstancePtr();

		ColourManager::getInstance().shutdown();
		delete ColourManager::getInstancePtr();

		BackwardCompatibilityManager::getInstance().shutdown();
		delete BackwardCompatibilityManager::getInstancePtr();

		RecentFilesManager::getInstance().shutdown();
		delete RecentFilesManager::getInstancePtr();

		StateManager::getInstance().shutdown();
		delete StateManager::getInstancePtr();

		GroupMessage::getInstance().shutdown();
		delete GroupMessage::getInstancePtr();

		DialogManager::getInstance().shutdown();
		delete DialogManager::getInstancePtr();

		MessageBoxManager::getInstance().shutdown();
		delete MessageBoxManager::getInstancePtr();

		UndoManager::getInstance().shutdown();
		delete UndoManager::getInstancePtr();

		EditorWidgets::getInstance().shutdown();
		delete EditorWidgets::getInstancePtr();

		WidgetTypes::getInstance().shutdown();
		delete WidgetTypes::getInstancePtr();

		HotKeyManager::getInstance().shutdown();
		delete HotKeyManager::getInstancePtr();

		WidgetCreatorManager::getInstance().shutdown();
		delete WidgetCreatorManager::getInstancePtr();

		WidgetSelectorManager::getInstance().shutdown();
		delete WidgetSelectorManager::getInstancePtr();

		CommandManager::getInstance().shutdown();
		delete CommandManager::getInstancePtr();

		SettingsManager::getInstance().saveSettingsFile("SettingsResult.xml");
		SettingsManager::getInstance().saveUserSettingsFile();
		delete SettingsManager::getInstancePtr();

		std::string subWidgetCategory = MyGUI::SubWidgetManager::getInstance().getCategoryName();
		MyGUI::FactoryManager::getInstance().unregisterFactory<MyGUI::FilterNone>(subWidgetCategory);

		std::string layerCategory = MyGUI::LayerManager::getInstance().getCategoryName();
		MyGUI::FactoryManager::getInstance().unregisterFactory<MyGUI::RTTLayer>(layerCategory);
	}
开发者ID:2asoft，项目名称:MMO-Framework，代码行数:67，代码来源:Application.cpp


示例9: closeMPQ

MainWindow::~MainWindow()
{
    closeMPQ();
    saveSettings();
    delete ui;
}
开发者ID:FlyingTarrasque，项目名称:freeablo，代码行数:6，代码来源:mainwindow.cpp


示例10: saveSettings

void WHTMLReport::process ()
{
  saveSettings();
  Instrumentation::coverage_method_t coverage_method=CoverageSettings::object().getCoverageMethod();
  int global_coverage_level = global_coverage_level_p->value();

  CSMes::DisplayLevelType_t global_coverage_display_mode=CSMes::DISPLAY_NOTHING;
  if (!statistic_global_coverage_p->isChecked())
    global_coverage_display_mode=CSMes::DISPLAY_NOTHING;
  else if (global_coverage_output_all_level_p->isChecked())
    global_coverage_display_mode=CSMes::ALL_LEVEL;
  else if (global_coverage_output_selected_level_p->isChecked())
    global_coverage_display_mode=CSMes::SELECTED_LEVEL;
  else if (global_coverage_output_selected_level_and_level_1_p->isChecked())
    global_coverage_display_mode=CSMes::SELECTED_LEVEL_AND_LEVEL_1;

  CSMes::DisplayLevelType_t method_coverage_display_mode=CSMes::DISPLAY_NOTHING;
  if (!statistic_method_p->isChecked())
    method_coverage_display_mode=CSMes::DISPLAY_NOTHING;
  else if (methods_output_all_level_p->isChecked())
    method_coverage_display_mode=CSMes::ALL_LEVEL;
  else if (methods_output_selected_level_p->isChecked())
    method_coverage_display_mode=CSMes::SELECTED_LEVEL;
  else if (methods_output_selected_level_and_level_1_p->isChecked())
    method_coverage_display_mode=CSMes::SELECTED_LEVEL_AND_LEVEL_1;
  CSMes::DisplaySortingType_t method_coverage_sorting_mode=CSMes::SORT_NONE;
  if (methods_sorting_coverage_p->isChecked())
    method_coverage_sorting_mode=CSMes::SORT_COVERAGE;
  else if (methods_sorting_name_p->isChecked())
    method_coverage_sorting_mode=CSMes::SORT_NAME;

  CSMes::DisplayLevelType_t execution_coverage_display_mode=CSMes::DISPLAY_NOTHING;
  if (!statistic_executions_p->isChecked())
    execution_coverage_display_mode=CSMes::DISPLAY_NOTHING;
  else if (executions_output_all_level_p->isChecked())
    execution_coverage_display_mode=CSMes::ALL_LEVEL;
  else if (executions_output_selected_level_p->isChecked())
    execution_coverage_display_mode=CSMes::SELECTED_LEVEL;
  else if (executions_output_selected_level_and_level_1_p->isChecked())
    execution_coverage_display_mode=CSMes::SELECTED_LEVEL_AND_LEVEL_1;
  CSMes::DisplaySortingType_t execution_coverage_sorting_mode=CSMes::SORT_NONE;
  if (executions_sorting_coverage_p->isChecked())
    execution_coverage_sorting_mode=CSMes::SORT_COVERAGE;
  else if (executions_sorting_name_p->isChecked())
    execution_coverage_sorting_mode=CSMes::SORT_NAME;

  CSMes::DisplayLevelType_t source_coverage_display_mode=CSMes::DISPLAY_NOTHING;
  if (!statistic_sources_p->isChecked())
    source_coverage_display_mode=CSMes::DISPLAY_NOTHING;
  else if (sources_output_all_level_p->isChecked())
    source_coverage_display_mode=CSMes::ALL_LEVEL;
  else if (sources_output_selected_level_p->isChecked())
    source_coverage_display_mode=CSMes::SELECTED_LEVEL;
  else if (sources_output_selected_level_and_level_1_p->isChecked())
    source_coverage_display_mode=CSMes::SELECTED_LEVEL_AND_LEVEL_1;
  CSMes::DisplaySortingType_t source_coverage_sorting_mode=CSMes::SORT_NONE;
  if (sources_sorting_coverage_p->isChecked())
    source_coverage_sorting_mode=CSMes::SORT_COVERAGE;
  else if (sources_sorting_name_p->isChecked())
    source_coverage_sorting_mode=CSMes::SORT_NAME;

  if (!csmes_p->exportHtmlReport(
        documentType(),
        file(),
        title_p->text(),
        icon_p->text(),
        css_file_p->text(),

        global_coverage_display_mode,
        method_coverage_display_mode,
        method_coverage_sorting_mode,
        source_coverage_display_mode,
        source_coverage_sorting_mode,
        execution_coverage_display_mode,
        execution_coverage_sorting_mode,

        executions_level_p->value(),

        toc_p->isChecked(),
        code_fragments_manually_validated_p->isChecked() && code_fragments_p->isChecked() ,
        code_fragments_unexecuted_p->isChecked() && code_fragments_p->isChecked(),
        code_fragments_executed_p->isChecked() && code_fragments_p->isChecked(),

        executions_filter_active_p->isChecked(),
        executions_filter_min_p->value(),
        executions_filter_max_p->value(),

        sources_filter_active_p->isChecked(),
        sources_filter_min_p->value(),
        sources_filter_max_p->value(),


        methods_filter_active_p->isChecked(),
        methods_filter_min_p->value(),
        methods_filter_max_p->value(),

        executions_watermark_medium_level_p->value(),
        executions_watermark_low_level_p->value(),
        global_coverage_watermark_medium_level_p->value(),
        global_coverage_watermark_low_level_p->value(),
//.........这里部分代码省略.........
开发者ID:testcocoon，项目名称:testcocoon，代码行数:101，代码来源:WHTMLReport.cpp


示例11: while

//--------------------------------------------------------------
void testApp::update(){
	// check for waiting messages
    
	while(receiver.hasWaitingMessages()){
        
        lastCmdTime = ofGetElapsedTimeMillis();
        
		// get the next message
		ofxOscMessage m;
                
		receiver.getNextMessage(&m);

        
        if ( m.getAddress() == "/l" ){ // Set a single led
            
            ledData[m.getArgAsInt32(0)].set(m.getArgAsInt32(1), m.getArgAsInt32(2), m.getArgAsInt32(3), 255);
                        
            lastLedCmdTime = ofGetElapsedTimeMillis();
            autoMode = false;
            
        } else if ( m.getAddress() == "/p" ) { // Set all
            
            //if( ofGetElapsedTimeMillis() - lastLedCmdTime > 2 ) {
                                
                int led = 1;
                int section = m.getArgAsInt32(0);
                int start   = section;
                int end     = start+120;
                
                for(int i=start; i<end && i<height; i++) {
                    
                    if(led+2 < m.getNumArgs()) {
                        ledData[i].set(m.getArgAsInt32(led),m.getArgAsInt32(led+1),m.getArgAsInt32(led+2));
                    }
                    
                    led +=3;
                }
                lastLedCmdTime = ofGetElapsedTimeMillis();
                
            //}
            autoMode = false;
            
        } else if ( m.getAddress() == "/c" ) {
            // Compressed data not yet implemented
            if( ofGetElapsedTimeMillis() - lastLedCmdTime > 2 ) {
                
                lastLedCmdTime = ofGetElapsedTimeMillis();
            
            }
            
       
        } else if ( m.getAddress() == "/status" ) {
            
            ofxOscMessage r;
            r.setAddress("/status");
            r.addStringArg(m.getArgAsString(0));
            if(autoMode) {
                r.addIntArg(2);
                r.addStringArg("Not receiving data. Running auto mode.");
            } else {
                r.addIntArg(1);
                r.addStringArg("All good, alive and listening.");
            }
            
            r.addStringArg(hostname);
            sender.sendMessage(r);
            
        } else if ( m.getAddress() == "/debug" ) {
            
            if(m.getArgAsInt32(0) == 1) {
                ofSetLogLevel(OF_LOG_VERBOSE);
            } else {
                ofSetLogLevel(OF_LOG_SILENT);
            }
            
        
        } else if ( m.getAddress() == "/setLength" ) {
            height  = m.getArgAsInt32(0);
            led     = new ofxLEDsLPD8806(height);
            ledData.assign(height,ofColor());
            ofLogNotice() << " Set LED length to " << height;

		} else if ( m.getAddress() == "/setId" ) {
            
            clientId = m.getArgAsInt32(0);
            saveSettings();
            state = STATE_CONNECTED;
            
            ofLogNotice() << " Set ID to " << clientId;

        } else if ( m.getAddress() == "/setMaster" ) {
            
            sender.setup(masterHostname, masterPort);
            masterHostname = m.getArgAsString(0);
            saveSettings();
            
            ofLogNotice() << " Set Master hostname to " << masterHostname;
            
        }
//.........这里部分代码省略.........
开发者ID:mrbichel，项目名称:leafLed，代码行数:101，代码来源:testApp.cpp


示例12: saveSettings

void testApp::s0Events(ofxUIEventArgs &e){
    
    string name = e.widget->getName();
    
    if(e.widget->getKind() == 12){ //no key events whilst text is focussed
        
        ofxUITextInput * t = (ofxUITextInput *) e.widget;
        
        if(t->getTriggerType() == OFX_UI_TEXTINPUT_ON_FOCUS){
            t->setTriggerType(OFX_UI_TEXTINPUT_ON_UNFOCUS);
            isTextFocus = true;
        }else{
            t->setTriggerType(OFX_UI_TEXTINPUT_ON_FOCUS);
            isTextFocus = false;
        }
        
    }
    
    
    if(isMouseDown){
        
        if(!isSaveDialog && !isLoadDialog){
            if(name == "SAVE"){
                confLab->setLabel("CONFIRM SAVE FILE");
                isSaveDialog = true; isLoadDialog = false;
                dialog->setVisible(true);
            }
            
            if(name == "LOAD"){
                isLoadDialog = true; isSaveDialog = false;
                confLab->setLabel("CONFIRM LOAD FILE");
                dialog->setVisible(true);
            }
        }else{
            
            if(isSaveDialog){
                
                if(name == "OK"){
                    saveSettings(fileNameInput->getTextString());
                    dialog->setVisible(false);
                    isSaveDialog = false;
                }else{
                    isSaveDialog = false;
                    dialog->setVisible(false);
                }
            }
            
            if(isLoadDialog){
                
                if(name == "OK"){
                    loadSettings(fileNameInput->getTextString());
                    dialog->setVisible(false);
                    isLoadDialog = false;
                }else{
                    isLoadDialog = false;
                    dialog->setVisible(false);
                }
            }
            
        }
        
        
        
        
    }
    
    
	
}
开发者ID:kimon-satan，项目名称:danceTracker，代码行数:69，代码来源:testApp.cpp


示例13: saveSettings

void QgsColorDialogV2::closeEvent( QCloseEvent *e )
{
  saveSettings();
  QDialog::closeEvent( e );
}
开发者ID:NyakudyaA，项目名称:QGIS，代码行数:5，代码来源:qgscolordialog.cpp


示例14: HAL_INFO

bool RTIMUSettings::loadSettings()
{
    char buf[200];
    char key[200];
    char val[200];
    RTFLOAT ftemp;

    //  preset general defaults

    m_imuType = RTIMU_TYPE_AUTODISCOVER;
    m_I2CSlaveAddress = 0;
    m_I2CBus = 1;
    m_fusionType = RTFUSION_TYPE_RTQF;
    m_compassCalValid = false;

    //  MPU9150 defaults

    m_MPU9150GyroAccelSampleRate = 50;
    m_MPU9150CompassSampleRate = 25;
    m_MPU9150GyroAccelLpf = MPU9150_LPF_20;
    m_MPU9150GyroFsr = MPU9150_GYROFSR_1000;
    m_MPU9150AccelFsr = MPU9150_ACCELFSR_8;

    //  GD20HM303D defaults

    m_GD20HM303DGyroSampleRate = L3GD20H_SAMPLERATE_50;
    m_GD20HM303DGyroBW = L3GD20H_BANDWIDTH_1;
    m_GD20HM303DGyroHpf = L3GD20H_HPF_4;
    m_GD20HM303DGyroFsr = L3GD20H_FSR_500;

    m_GD20HM303DAccelSampleRate = LSM303D_ACCEL_SAMPLERATE_50;
    m_GD20HM303DAccelFsr = LSM303D_ACCEL_FSR_8;
    m_GD20HM303DAccelLpf = LSM303D_ACCEL_LPF_50;

    m_GD20HM303DCompassSampleRate = LSM303D_COMPASS_SAMPLERATE_50;
    m_GD20HM303DCompassFsr = LSM303D_COMPASS_FSR_2;

    //  GD20M303DLHC defaults

    m_GD20M303DLHCGyroSampleRate = L3GD20_SAMPLERATE_95;
    m_GD20M303DLHCGyroBW = L3GD20_BANDWIDTH_1;
    m_GD20M303DLHCGyroHpf = L3GD20_HPF_4;
    m_GD20M303DLHCGyroFsr = L3GD20H_FSR_500;

    m_GD20M303DLHCAccelSampleRate = LSM303DLHC_ACCEL_SAMPLERATE_50;
    m_GD20M303DLHCAccelFsr = LSM303DLHC_ACCEL_FSR_8;

    m_GD20M303DLHCCompassSampleRate = LSM303DLHC_COMPASS_SAMPLERATE_30;
    m_GD20M303DLHCCompassFsr = LSM303DLHC_COMPASS_FSR_1_3;

    //  LSM9DS0 defaults

    m_LSM9DS0GyroSampleRate = LSM9DS0_GYRO_SAMPLERATE_95;
    m_LSM9DS0GyroBW = LSM9DS0_GYRO_BANDWIDTH_1;
    m_LSM9DS0GyroHpf = LSM9DS0_GYRO_HPF_4;
    m_LSM9DS0GyroFsr = LSM9DS0_GYRO_FSR_500;

    m_LSM9DS0AccelSampleRate = LSM9DS0_ACCEL_SAMPLERATE_50;
    m_LSM9DS0AccelFsr = LSM9DS0_ACCEL_FSR_8;
    m_LSM9DS0AccelLpf = LSM9DS0_ACCEL_LPF_50;

    m_LSM9DS0CompassSampleRate = LSM9DS0_COMPASS_SAMPLERATE_50;
    m_LSM9DS0CompassFsr = LSM9DS0_COMPASS_FSR_2;

    //  check to see if settings file exists

    if (!(m_fd = fopen(m_filename, "r"))) {
        HAL_INFO("Settings file not found. Using defaults and creating settings file\n");
        return saveSettings();
    }

    while (fgets(buf, 200, m_fd)) {
        if ((buf[0] == '#') || (buf[0] == ' ') || (buf[0] == '\n'))
            // just a comment
            continue;

        if (sscanf(buf, "%[^=]=%s", key, val) != 2) {
            HAL_ERROR1("Bad line in settings file: %s\n", buf);
            fclose(m_fd);
            return false;
        }

        //  now decode keys

        //  general config

        if (strcmp(key, RTIMULIB_IMU_TYPE) == 0) {
            m_imuType = atoi(val);
        } else if (strcmp(key, RTIMULIB_FUSION_TYPE) == 0) {
            m_fusionType = atoi(val);
        } else if (strcmp(key, RTIMULIB_I2C_BUS) == 0) {
            m_I2CBus = atoi(val);
        } else if (strcmp(key, RTIMULIB_I2C_SLAVEADDRESS) == 0) {
            m_I2CSlaveAddress = atoi(val);

        // compass calibration

        } else if (strcmp(key, RTIMULIB_COMPASSCAL_VALID) == 0) {
            m_compassCalValid = strcmp(val, "true") == 0;
        } else if (strcmp(key, RTIMULIB_COMPASSCAL_MINX) == 0) {
//.........这里部分代码省略.........
开发者ID:GregMp5，项目名称:RTIMULib，代码行数:101，代码来源:RTIMUSettings.cpp


示例15: saveSettings

RazorPanel::~RazorPanel()
{
    mLayout->setEnabled(false);
    saveSettings();
    qDeleteAll(mPlugins);
}
开发者ID:SamTheReaper，项目名称:razor-qt，代码行数:6，代码来源:razorpanel.cpp


示例16: saveSettings

CSV::~CSV ()
{
  saveSettings();
}
开发者ID:botvs，项目名称:FinancialAnalytics，代码行数:4，代码来源:CSV.cpp


示例17: 

VideoPreview::~VideoPreview() {
	if (set) saveSettings();
}
开发者ID:nE0sIghT，项目名称:smpv，代码行数:3，代码来源:videopreview.cpp


示例18: saveSettings

void MainWindow::commitAppData(QSessionManager &manager)
{
	saveSettings();
}
开发者ID:shizarheu，项目名称:Hussein，代码行数:4，代码来源:mainwindow.cpp


示例19: saveSettings

void settingswindow::on_btnSave_released()
{
    int savedLanguage = settings.value("Language", 0).toInt();
    int savedDownLimit = settings.value("libtorrent/download_rate_limit", 0).toInt();
    int savedUpLimit = settings.value("libtorrent/upload_rate_limit", 0).toInt();
    bool webEnabled = settings.value("WebInterfaceOn", true).toBool();

    uint savedPort = settings.value("libtorrent/port", 0).toUInt();

    bool needRestart = (ui->cmbLanguage->currentIndex() != savedLanguage);
    bool needRefreshTorrentSettings = ( (ui->numLimitDown->value() != savedDownLimit) ||
                                        (ui->numLimitUp->value() != savedUpLimit) ||
                                        (ui->chkActivateWeb->isChecked() != webEnabled) ||
                                        (static_cast<uint>(ui->numPort->value()) != savedPort));

    saveSettings();

    // send message settings saved to user
    emit sendMessageToStatusBar(QString("Settings saved"));
    qInfo("Settings saved");

    if (needRestart) {
        qDebug("need restart");
        QMessageBox mbox;
//        QString msg = QString("<center>Please restart Tsunami to apply new settings<br/>Do you want to restart now?</center>");
        QString msg = QString("<center>Please restart Tsunami to apply new settings<br/></center>");
        mbox.setText(msg);
        mbox.exec();
//        mbox.setStandardButtons( QMessageBox::Yes | QMessageBox::No );

//        bool proceedWithRestart = false;

//        switch (mbox.exec()) {
//            case QMessageBox::Yes:
//                proceedWithRestart = true;
//                break;
//            default:
//                proceedWithRestart = false;
//                break;
//        }
//        if (proceedWithRestart) {
//            qDebug("restarting");

//            // due to squirrel standard behaviour, qApp->arguments()[0] returs path to a tsunami version older than one just downloaded
//            // retrieve path of tsunami.exe loader outside current path and launch
//            QString fileName = QFileInfo(QCoreApplication::applicationFilePath()).fileName();
//            QDir oldPath(QCoreApplication::applicationDirPath());
//            oldPath.cdUp();
//            QString newPath = oldPath.filePath(fileName);

//            qApp->quit();
//            QProcess::startDetached(newPath, qApp->arguments());
//        } else {
//            if (needRefreshTorrentSettings) {
//                qDebug("send refresh to libtorrent");
//                emit sendRefreshSettings();
//            }
//        }
    } else {
        qDebug("don't need restart");
//        if (needRefreshTorrentSettings) {
//            qDebug("send refresh to libtorrent");
//            emit sendRefreshSettings();
//        }
    }

    if (needRefreshTorrentSettings) {
        qDebug("send refresh to libtorrent");
        emit sendRefreshSettings();
    }

}
开发者ID:AdunanzA，项目名称:Tsunami，代码行数:72，代码来源:settingswindow.cpp


示例20: saveSettings

void ccVolumeCalcTool::saveSettingsAndAccept()
{
	saveSettings();
	accept();
}
开发者ID:Puwong，项目名称:CloudCompare，代码行数:5，代码来源:ccVolumeCalcTool.cpp



注：本文中的saveSettings函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ saveStateClose函数代码示例发布时间：2022-05-30
下一篇：
C++ saveScrollPositionAndViewStateToItem函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap