C++ safe_atou函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中safe_atou函数的典型用法代码示例。如果您正苦于以下问题：C++ safe_atou函数的具体用法？C++ safe_atou怎么用？C++ safe_atou使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了safe_atou函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: routes_max

static unsigned routes_max(void) {
        static thread_local unsigned cached = 0;

        _cleanup_free_ char *s4 = NULL, *s6 = NULL;
        unsigned val4 = ROUTES_DEFAULT_MAX_PER_FAMILY, val6 = ROUTES_DEFAULT_MAX_PER_FAMILY;

        if (cached > 0)
                return cached;

        if (sysctl_read("net/ipv4/route/max_size", &s4) >= 0) {
                truncate_nl(s4);
                if (safe_atou(s4, &val4) >= 0 &&
                    val4 == 2147483647U)
                        /* This is the default "no limit" value in the kernel */
                        val4 = ROUTES_DEFAULT_MAX_PER_FAMILY;
        }

        if (sysctl_read("net/ipv6/route/max_size", &s6) >= 0) {
                truncate_nl(s6);
                (void) safe_atou(s6, &val6);
        }

        cached = MAX(ROUTES_DEFAULT_MAX_PER_FAMILY, val4) +
                 MAX(ROUTES_DEFAULT_MAX_PER_FAMILY, val6);
        return cached;
}

开发者ID:Werkov，项目名称:systemd，代码行数:26，代码来源:networkd-route.c

示例2: config_parse_unsigned

int config_parse_unsigned(
                const char *filename,
                unsigned line,
                const char *section,
                const char *lvalue,
                int ltype,
                const char *rvalue,
                void *data,
                void *userdata) {

        unsigned *u = data;
        int r;

        assert(filename);
        assert(lvalue);
        assert(rvalue);
        assert(data);

        r = safe_atou(rvalue, u);
        if (r < 0) {
                log_error("[%s:%u] Failed to parse numeric value: %s", filename, line, rvalue);
                return r;
        }

        return 0;
}

开发者ID:olegchir，项目名称:systemd，代码行数:26，代码来源:conf-parser.c

示例3: client_run

static int client_run(int ifindex, const char *seed_str, const struct ether_addr *ha, sd_event *e) {
        sd_ipv4ll *ll;

        assert_se(sd_ipv4ll_new(&ll) >= 0);
        assert_se(sd_ipv4ll_attach_event(ll, e, 0) >= 0);

        assert_se(sd_ipv4ll_set_index(ll, ifindex) >= 0);
        assert_se(sd_ipv4ll_set_mac(ll, ha) >= 0);
        assert_se(sd_ipv4ll_set_callback(ll, ll_handler, NULL) >= 0);

        if (seed_str) {
                unsigned seed;

                assert_se(safe_atou(seed_str, &seed) >= 0);

                assert_se(sd_ipv4ll_set_address_seed(ll, seed) >= 0);
        }

        log_info("starting IPv4LL client");

        assert_se(sd_ipv4ll_start(ll) >= 0);

        assert_se(sd_event_loop(e) >= 0);

        assert_se(!sd_ipv4ll_unref(ll));

        return EXIT_SUCCESS;
}

开发者ID:lnykryn，项目名称:systemd，代码行数:28，代码来源:test-ipv4ll-manual.c

示例4: socket_address_parse

int socket_address_parse(SocketAddress *a, const char *s) {
        char *e, *n;
        unsigned u;
        int r;

        assert(a);
        assert(s);

        zero(*a);
        a->type = SOCK_STREAM;

        if (*s == '[') {
                /* IPv6 in [x:.....:z]:p notation */

                if (!socket_ipv6_is_supported()) {
                        log_warning("Binding to IPv6 address not available since kernel does not support IPv6.");
                        return -EAFNOSUPPORT;
                }

                e = strchr(s+1, ']');
                if (!e)
                        return -EINVAL;

                n = strndupa(s+1, e-s-1);

                errno = 0;
                if (inet_pton(AF_INET6, n, &a->sockaddr.in6.sin6_addr) <= 0)
                        return errno > 0 ? -errno : -EINVAL;

                e++;
                if (*e != ':')
                        return -EINVAL;

                e++;
                r = safe_atou(e, &u);
                if (r < 0)
                        return r;

                if (u <= 0 || u > 0xFFFF)
                        return -EINVAL;

                a->sockaddr.in6.sin6_family = AF_INET6;
                a->sockaddr.in6.sin6_port = htons((uint16_t) u);
                a->size = sizeof(struct sockaddr_in6);

        } else if (*s == '/') {
                /* AF_UNIX socket */

                size_t l;

                l = strlen(s);
                if (l >= sizeof(a->sockaddr.un.sun_path))
                        return -EINVAL;

                a->sockaddr.un.sun_family = AF_UNIX;
                memcpy(a->sockaddr.un.sun_path, s, l);
                a->size = offsetof(struct sockaddr_un, sun_path) + l + 1;

        } else if (*s == '@') {

开发者ID:275288698，项目名称:systemd-ubuntu-with-dbus，代码行数:59，代码来源:socket-util.c

示例5: prompt_loop

static int prompt_loop(const char *text, char **l, bool (*is_valid)(const char *name), char **ret) {
        int r;

        assert(text);
        assert(is_valid);
        assert(ret);

        for (;;) {
                _cleanup_free_ char *p = NULL;
                unsigned u;

                r = ask_string(&p, "%s %s (empty to skip): ", draw_special_char(DRAW_TRIANGULAR_BULLET), text);
                if (r < 0) {
                        log_error("Failed to query user: %s", strerror(-r));
                        return r;
                }

                if (isempty(p)) {
                        log_warning("No data entered, skipping.");
                        return 0;
                }

                r = safe_atou(p, &u);
                if (r >= 0) {
                        char *c;

                        if (u <= 0 || u > strv_length(l)) {
                                log_error("Specified entry number out of range.");
                                continue;
                        }

                        log_info("Selected '%s'.", l[u-1]);

                        c = strdup(l[u-1]);
                        if (!c)
                                return log_oom();

                        free(*ret);
                        *ret = c;
                        return 0;
                }

                if (!is_valid(p)) {
                        log_error("Entered data invalid.");
                        continue;
                }

                free(*ret);
                *ret = p;
                p = 0;
                return 0;
        }
}

开发者ID:alan030189，项目名称:systemd，代码行数:53，代码来源:firstboot.c

示例6: test_ioprio_class_from_to_string_one

static void test_ioprio_class_from_to_string_one(const char *val, int expected) {
        assert_se(ioprio_class_from_string(val) == expected);
        if (expected >= 0) {
                _cleanup_free_ char *s = NULL;
                unsigned ret;

                assert_se(ioprio_class_to_string_alloc(expected, &s) == 0);
                /* We sometimes get a class number and sometimes a number back */
                assert_se(streq(s, val) ||
                          safe_atou(val, &ret) == 0);
        }
}

开发者ID:karelzak，项目名称:systemd，代码行数:12，代码来源:test-process-util.c

示例7: parse_cpu_set_and_warn

int parse_cpu_set_and_warn(
                const char *rvalue,
                cpu_set_t **cpu_set,
                const char *unit,
                const char *filename,
                unsigned line,
                const char *lvalue) {

        const char *whole_rvalue = rvalue;
        _cleanup_cpu_free_ cpu_set_t *c = NULL;
        unsigned ncpus = 0;

        assert(lvalue);
        assert(rvalue);

        for (;;) {
                _cleanup_free_ char *word = NULL;
                unsigned cpu;
                int r;

                r = extract_first_word(&rvalue, &word, WHITESPACE, EXTRACT_QUOTES);
                if (r < 0) {
                        log_syntax(unit, LOG_ERR, filename, line, r, "Invalid value for %s: %s", lvalue, whole_rvalue);
                        return r;
                }
                if (r == 0)
                        break;

                if (!c) {
                        c = cpu_set_malloc(&ncpus);
                        if (!c)
                                return log_oom();
                }

                r = safe_atou(word, &cpu);
                if (r < 0 || cpu >= ncpus) {
                        log_syntax(unit, LOG_ERR, filename, line, r, "Failed to parse CPU affinity '%s'", rvalue);
                        return -EINVAL;
                }

                CPU_SET_S(cpu, CPU_ALLOC_SIZE(ncpus), c);
        }

        /* On success, sets *cpu_set and returns ncpus for the system. */
        if (c) {
                *cpu_set = c;
                c = NULL;
        }

        return (int) ncpus;
}

开发者ID:josephgbr，项目名称:systemd，代码行数:51，代码来源:cpu-set-util.c

示例8: strspn

                                /* Ignore failure. E.g. 10.M is valid */
                                frac = l2;
                                for (; e < e2; e++)
                                        frac /= 10;
                        }
                }

                e += strspn(e, WHITESPACE);

                for (i = start_pos; i < n_entries; i++)
                        if (startswith(e, table[i].suffix))
                                break;

                if (i >= n_entries)
                        return -EINVAL;

                if (l + (frac > 0) > ULLONG_MAX / table[i].factor)
                        return -ERANGE;

                tmp = l * table[i].factor + (unsigned long long) (frac * table[i].factor);
                if (tmp > ULLONG_MAX - r)
                        return -ERANGE;

                r += tmp;
                if ((unsigned long long) (uint64_t) r != r)
                        return -ERANGE;

                p = e + strlen(table[i].suffix);

                start_pos = i + 1;

        } while (*p);

        *size = r;

        return 0;
}

#if 0 /* NM_IGNORED */
int parse_range(const char *t, unsigned *lower, unsigned *upper) {
        _cleanup_free_ char *word = NULL;
        unsigned l, u;
        int r;

        assert(lower);
        assert(upper);

        /* Extract the lower bound. */
        r = extract_first_word(&t, &word, "-", EXTRACT_DONT_COALESCE_SEPARATORS);
        if (r < 0)
                return r;
        if (r == 0)
                return -EINVAL;

        r = safe_atou(word, &l);
        if (r < 0)
                return r;

        /* Check for the upper bound and extract it if needed */
        if (!t)
                /* Single number with no dashes. */
                u = l;
        else if (!*t)
                /* Trailing dash is an error. */
                return -EINVAL;
        else {
                r = safe_atou(t, &u);
                if (r < 0)
                        return r;
        }

        *lower = l;
        *upper = u;
        return 0;
}

开发者ID:atulhjp，项目名称:NetworkManager，代码行数:75，代码来源:parse-util.c

示例9: sd_session_get_vt

_public_ int sd_session_get_vt(const char *session, unsigned *vtnr) {
        _cleanup_free_ char *vtnr_string = NULL;
        unsigned u;
        int r;

        r = session_get_string(session, "VTNR", &vtnr_string);
        if (r < 0)
                return r;

        r = safe_atou(vtnr_string, &u);
        if (r < 0)
                return r;

        *vtnr = u;
        return 0;
}

开发者ID:chuanchang，项目名称:systemd，代码行数:16，代码来源:sd-login.c

示例10: parse_percent_unbounded

int parse_percent_unbounded(const char *p) {
        const char *pc, *n;
        unsigned v;
        int r;

        pc = endswith(p, "%");
        if (!pc)
                return -EINVAL;

        n = strndupa(p, pc - p);
        r = safe_atou(n, &v);
        if (r < 0)
                return r;

        return (int) v;
}

开发者ID:NetworkManager，项目名称:NetworkManager，代码行数:16，代码来源:parse-util.c

示例11: device_set_devuid

static int device_set_devuid(sd_device *device, const char *uid) {
        unsigned u;
        int r;

        assert(device);
        assert(uid);

        r = safe_atou(uid, &u);
        if (r < 0)
                return r;

        r = device_add_property_internal(device, "DEVUID", uid);
        if (r < 0)
                return r;

        device->devuid = u;

        return 0;
}

开发者ID:torstehu，项目名称:systemd，代码行数:19，代码来源:device-private.c

示例12: device_set_devgid

static int device_set_devgid(sd_device *device, const char *gid) {
        unsigned g;
        int r;

        assert(device);
        assert(gid);

        r = safe_atou(gid, &g);
        if (r < 0)
                return r;

        r = device_add_property_internal(device, "DEVGID", gid);
        if (r < 0)
                return r;

        device->devgid = g;

        return 0;
}

开发者ID:torstehu，项目名称:systemd，代码行数:19，代码来源:device-private.c

示例13: signal_from_string

int signal_from_string(const char *s) {
        int signo;
        int offset = 0;
        unsigned u;

        signo = __signal_from_string(s);
        if (signo > 0)
                return signo;

        if (startswith(s, "RTMIN+")) {
                s += 6;
                offset = SIGRTMIN;
        }
        if (safe_atou(s, &u) >= 0) {
                signo = (int) u + offset;
                if (signo > 0 && signo < _NSIG)
                        return signo;
        }
        return -EINVAL;
}

开发者ID:AOSC-Dev，项目名称:systemd，代码行数:20，代码来源:signal-util.c

示例14: dns_type_from_string

int dns_type_from_string(const char *s) {
        const struct dns_type_name *sc;

        assert(s);

        sc = lookup_dns_type(s, strlen(s));
        if (sc)
                return sc->id;

        s = startswith_no_case(s, "TYPE");
        if (s) {
                unsigned x;

                if (safe_atou(s, &x) >= 0 &&
                    x <= UINT16_MAX)
                        return (int) x;
        }

        return _DNS_TYPE_INVALID;
}

开发者ID:Hariprasathganesh，项目名称:testsysd，代码行数:20，代码来源:dns-type.c

示例15: test_cap_list

/* verify the capability parser */
static void test_cap_list(void) {
        int i;

        assert_se(!capability_to_name(-1));
        assert_se(!capability_to_name(capability_list_length()));

        for (i = 0; i < capability_list_length(); i++) {
                const char *n;

                assert_se(n = capability_to_name(i));
                assert_se(capability_from_name(n) == i);
                printf("%s = %i\n", n, i);
        }

        assert_se(capability_from_name("asdfbsd") == -EINVAL);
        assert_se(capability_from_name("CAP_AUDIT_READ") == CAP_AUDIT_READ);
        assert_se(capability_from_name("cap_audit_read") == CAP_AUDIT_READ);
        assert_se(capability_from_name("cAp_aUdIt_rEAd") == CAP_AUDIT_READ);
        assert_se(capability_from_name("0") == 0);
        assert_se(capability_from_name("15") == 15);
        assert_se(capability_from_name("-1") == -EINVAL);

        for (i = 0; i < capability_list_length(); i++) {
                _cleanup_cap_free_charp_ char *a = NULL;
                const char *b;
                unsigned u;

                assert_se(a = cap_to_name(i));

                /* quit the loop as soon as libcap starts returning
                 * numeric ids, formatted as strings */
                if (safe_atou(a, &u) >= 0)
                        break;

                assert_se(b = capability_to_name(i));

                printf("%s vs. %s\n", a, b);

                assert_se(strcasecmp(a, b) == 0);
        }
}

开发者ID:arthur-c，项目名称:systemd，代码行数:42，代码来源:test-cap-list.c

示例16: add_match

static int add_match(Set *set, const char *match) {
        int r = -ENOMEM;
        unsigned pid;
        const char* prefix;
        char *pattern = NULL;
        _cleanup_free_ char *p = NULL;

        if (strchr(match, '='))
                prefix = "";
        else if (strchr(match, '/')) {
                p = path_make_absolute_cwd(match);
                if (!p)
                        goto fail;

                match = p;
                prefix = "COREDUMP_EXE=";
        }
        else if (safe_atou(match, &pid) == 0)
                prefix = "COREDUMP_PID=";
        else
                prefix = "COREDUMP_COMM=";

        pattern = strjoin(prefix, match, NULL);
        if (!pattern)
                goto fail;

        log_debug("Adding pattern: %s", pattern);
        r = set_put(set, pattern);
        if (r < 0) {
                log_error("Failed to add pattern '%s': %s",
                          pattern, strerror(-r));
                free(pattern);
                goto fail;
        }

        return 0;
fail:
        log_error("Failed to add match: %s", strerror(-r));
        return r;
}

开发者ID:jaanek，项目名称:systemd，代码行数:40，代码来源:coredumpctl.c

示例17: verify_contents

static void verify_contents(sd_journal *j, unsigned skip) {
        unsigned i;

        assert(j);

        i = 0;
        SD_JOURNAL_FOREACH(j) {
                const void *d;
                char *k, *c;
                size_t l;
                unsigned u;

                assert_se(sd_journal_get_cursor(j, &k) >= 0);
                printf("cursor: %s\n", k);
                free(k);

                assert_se(sd_journal_get_data(j, "MAGIC", &d, &l) >= 0);
                printf("\t%.*s\n", (int) l, (const char*) d);

                assert_se(sd_journal_get_data(j, "NUMBER", &d, &l) >= 0);
                assert_se(k = strndup(d, l));
                printf("\t%s\n", k);

                if (skip > 0) {
                        assert_se(safe_atou(k + 7, &u) >= 0);
                        assert_se(i == u);
                        i += skip;
                }

                free(k);

                assert_se(sd_journal_get_cursor(j, &c) >= 0);
                assert_se(sd_journal_test_cursor(j, c) > 0);
                free(c);
        }

        if (skip > 0)
                assert_se(i == N_ENTRIES);
}

开发者ID:vitalikp，项目名称:journal，代码行数:39，代码来源:test-journal-stream.c

示例18: parse_argv

static int parse_argv(int argc, char *argv[]) {

        enum {
                ARG_VERSION = 0x100,
                ARG_DEPTH,
                ARG_CPU_TYPE,
                ARG_ORDER,
                ARG_RECURSIVE,
        };

        static const struct option options[] = {
                { "help",         no_argument,       NULL, 'h'           },
                { "version",      no_argument,       NULL, ARG_VERSION   },
                { "delay",        required_argument, NULL, 'd'           },
                { "iterations",   required_argument, NULL, 'n'           },
                { "batch",        no_argument,       NULL, 'b'           },
                { "raw",          no_argument,       NULL, 'r'           },
                { "depth",        required_argument, NULL, ARG_DEPTH     },
                { "cpu",          optional_argument, NULL, ARG_CPU_TYPE  },
                { "order",        required_argument, NULL, ARG_ORDER     },
                { "recursive",    required_argument, NULL, ARG_RECURSIVE },
                { "machine",      required_argument, NULL, 'M'           },
                {}
        };

        bool recursive_unset = false;
        int c, r;

        assert(argc >= 1);
        assert(argv);

        while ((c = getopt_long(argc, argv, "hptcmin:brd:kPM:", options, NULL)) >= 0)

                switch (c) {

                case 'h':
                        help();
                        return 0;

                case ARG_VERSION:
                        return version();

                case ARG_CPU_TYPE:
                        if (optarg) {
                                if (streq(optarg, "time"))
                                        arg_cpu_type = CPU_TIME;
                                else if (streq(optarg, "percentage"))
                                        arg_cpu_type = CPU_PERCENT;
                                else {
                                        log_error("Unknown argument to --cpu=: %s", optarg);
                                        return -EINVAL;
                                }
                        } else
                                arg_cpu_type = CPU_TIME;

                        break;

                case ARG_DEPTH:
                        r = safe_atou(optarg, &arg_depth);
                        if (r < 0) {
                                log_error("Failed to parse depth parameter.");
                                return -EINVAL;
                        }

                        break;

                case 'd':
                        r = parse_sec(optarg, &arg_delay);
                        if (r < 0 || arg_delay <= 0) {
                                log_error("Failed to parse delay parameter.");
                                return -EINVAL;
                        }

                        break;

                case 'n':
                        r = safe_atou(optarg, &arg_iterations);
                        if (r < 0) {
                                log_error("Failed to parse iterations parameter.");
                                return -EINVAL;
                        }

                        break;

                case 'b':
                        arg_batch = true;
                        break;

                case 'r':
                        arg_raw = true;
                        break;

                case 'p':
                        arg_order = ORDER_PATH;
                        break;

                case 't':
                        arg_order = ORDER_TASKS;
                        break;

//.........这里部分代码省略.........

开发者ID:Like-all，项目名称:tinysystemd-substrate，代码行数:101，代码来源:cgtop.c

示例19: automount_deserialize_item

static int automount_deserialize_item(Unit *u, const char *key, const char *value, FDSet *fds) {
        Automount *a = AUTOMOUNT(u);
        int r;

        assert(a);
        assert(fds);

        if (streq(key, "state")) {
                AutomountState state;

                state = automount_state_from_string(value);
                if (state < 0)
                        log_debug_unit(u->id, "Failed to parse state value %s", value);
                else
                        a->deserialized_state = state;
        } else if (streq(key, "result")) {
                AutomountResult f;

                f = automount_result_from_string(value);
                if (f < 0)
                        log_debug_unit(u->id, "Failed to parse result value %s", value);
                else if (f != AUTOMOUNT_SUCCESS)
                        a->result = f;

        } else if (streq(key, "dev-id")) {
                unsigned d;

                if (safe_atou(value, &d) < 0)
                        log_debug_unit(u->id, "Failed to parse dev-id value %s", value);
                else
                        a->dev_id = (unsigned) d;
        } else if (streq(key, "token")) {
                unsigned token;

                if (safe_atou(value, &token) < 0)
                        log_debug_unit(u->id, "Failed to parse token value %s", value);
                else {
                        if (!a->tokens)
                                if (!(a->tokens = set_new(trivial_hash_func, trivial_compare_func)))
                                        return -ENOMEM;

                        r = set_put(a->tokens, UINT_TO_PTR(token));
                        if (r < 0)
                                return r;
                }
        } else if (streq(key, "pipe-fd")) {
                int fd;

                if (safe_atoi(value, &fd) < 0 || fd < 0 || !fdset_contains(fds, fd))
                        log_debug_unit(u->id, "Failed to parse pipe-fd value %s", value);
                else {
                        if (a->pipe_fd >= 0)
                                close_nointr_nofail(a->pipe_fd);

                        a->pipe_fd = fdset_remove(fds, fd);
                }
        } else
                log_debug_unit(u->id, "Unknown serialization key '%s'", key);

        return 0;
}

开发者ID:ariscop，项目名称:systemd，代码行数:61，代码来源:automount.c

示例20: parse_argv

static int parse_argv(int argc, char *argv[]) {

        enum {
                ARG_VERSION = 0x100,
                ARG_FILES_MAX,
                ARG_FILE_SIZE_MAX,
                ARG_TIMEOUT
        };

        static const struct option options[] = {
                { "help",          no_argument,       NULL, 'h'                },
                { "version",       no_argument,       NULL, ARG_VERSION        },
                { "files-max",     required_argument, NULL, ARG_FILES_MAX      },
                { "file-size-max", required_argument, NULL, ARG_FILE_SIZE_MAX  },
                { "timeout",       required_argument, NULL, ARG_TIMEOUT        },
                {}
        };

        int c;

        assert(argc >= 0);
        assert(argv);

        while ((c = getopt_long(argc, argv, "h", options, NULL)) >= 0) {

                switch (c) {

                case 'h':
                        return help();

                case ARG_VERSION:
                        puts(PACKAGE_STRING);
                        puts(SYSTEMD_FEATURES);
                        return 0;

                case ARG_FILES_MAX:
                        if (safe_atou(optarg, &arg_files_max) < 0 || arg_files_max <= 0) {
                                log_error("Failed to parse maximum number of files %s.", optarg);
                                return -EINVAL;
                        }
                        break;

                case ARG_FILE_SIZE_MAX: {
                        unsigned long long ull;

                        if (safe_atollu(optarg, &ull) < 0 || ull <= 0) {
                                log_error("Failed to parse maximum file size %s.", optarg);
                                return -EINVAL;
                        }

                        arg_file_size_max = (off_t) ull;
                        break;
                }

                case ARG_TIMEOUT:
                        if (parse_sec(optarg, &arg_timeout) < 0 || arg_timeout <= 0) {
                                log_error("Failed to parse timeout %s.", optarg);
                                return -EINVAL;
                        }

                        break;

                case '?':
                        return -EINVAL;

                default:
                        assert_not_reached("Unhandled option");
                }
        }

        if (optind != argc-1 &&
            optind != argc-2) {
                help();
                return -EINVAL;
        }

        return 1;
}

开发者ID:MOBO-OSS，项目名称:systemd-relative，代码行数:78，代码来源:readahead.c

注：本文中的safe_atou函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ safe_calloc函数代码示例发布时间：2022-05-30

C++ safe_asprintf函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19166|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ safe_atou函数代码示例

示例1: routes_max

示例2: config_parse_unsigned

示例3: client_run

示例4: socket_address_parse

示例5: prompt_loop

示例6: test_ioprio_class_from_to_string_one

示例7: parse_cpu_set_and_warn

示例8: strspn

示例9: sd_session_get_vt

示例10: parse_percent_unbounded

示例11: device_set_devuid

示例12: device_set_devgid

示例13: signal_from_string

示例14: dns_type_from_string

示例15: test_cap_list

示例16: add_match

示例17: verify_contents

示例18: parse_argv

示例19: automount_deserialize_item

示例20: parse_argv

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

MATLAB第二次作业

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053