• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ sa函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中sa函数的典型用法代码示例。如果您正苦于以下问题:C++ sa函数的具体用法?C++ sa怎么用?C++ sa使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了sa函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: sa

bool
Lorica::Proxy::setup_shutdown_handler(void)
{
	ACE_Sig_Set sigset;

	// Register signal handlers.
	sigset.sig_add(SIGINT);
	sigset.sig_add(SIGUSR1);
	sigset.sig_add(SIGUSR2);
	sigset.sig_add(SIGTERM);

	// Register the <handle_signal> method to process all the signals in
	// <sigset>.
	ACE_Sig_Action sa(sigset,
			  (ACE_SignalHandler)Lorica::signal_handler);
	ACE_UNUSED_ARG(sa);

	return true;
}
开发者ID:colding,项目名称:lorica,代码行数:19,代码来源:proxy.cpp


示例2: ft_dirread

int	ft_dirread(s_dir *d, s_arg *a, char **argv) 
{
	int cd;

	d->open = opendir(argv[a->arc]);
	if (d->open == NULL)
		return (1);
	
	if(a->rm == 1)
		srm(d,a, argv);
	else
		sa(d,a);
	//cd = closedir(d->open);
	return (0);
	//	ft_putnbr(d->rd->d_type);// permet de connaitre le type de fichir, un fichier standard = 8 et un dossier = 4
	//	ft_putnbr(d->info->st_mode);
	//	ft_putnbr(d->info->st_mode);
	//	ft_putchar('\n');
}
开发者ID:hikkary,项目名称:ft_ls,代码行数:19,代码来源:main.c


示例3: expandInterfaces

uint16_t SocketAcceptor::listen(const std::vector<std::string>& interfaces, uint16_t port, int backlog, const SocketFactory& factory)
{
    std::vector<std::string> addresses = expandInterfaces(interfaces);
    std::string sport(boost::lexical_cast<std::string>(port));

    if (addresses.empty()) {
        // We specified some interfaces, but couldn't find addresses for them
        QPID_LOG(warning, "TCP/TCP6: No specified network interfaces found: Not Listening");
        return 0;
    }

    int listeningPort = 0;
    for (unsigned i = 0; i<addresses.size(); ++i) {
        QPID_LOG(debug, "Using interface: " << addresses[i]);
        SocketAddress sa(addresses[i], sport);

        do {
        try {
            // If we were told to figure out the port then only allow listening to one address
            if (port==0 && listeningPort!=0) {
                // Print warning if the user specified more than one interface
                QPID_LOG(warning, "Specified port=0: Only listened to: " << sa.asString());
                return listeningPort;
            }

            QPID_LOG(info, "Listening to: " << sa.asString());
            std::auto_ptr<Socket> s(factory());
            uint16_t lport = s->listen(sa, backlog);
            QPID_LOG(debug, "Listened to: " << lport);
            addListener(s.release());

            if (listeningPort==0) listeningPort = lport;
        } catch (std::exception& e) {
            QPID_LOG(warning, "Couldn't listen to: " << sa.asString() << ": " << e.what());
        }
        } while (sa.nextAddress());
    }
    if (listeningPort==0) {
        throw Exception("Couldn't find any network address to listen to");
    }
    return listeningPort;
}
开发者ID:MorganLindqvist,项目名称:debian-qpid-cpp,代码行数:42,代码来源:SocketTransport.cpp


示例4: resolve

void				resolve(t_stack *stack, char **argv)
{
	get_list(stack, argv);
	if (stack->number_in_a == 2)
		sa(stack, 1);
	while (stack->number_in_b || !is_sort(stack))
	{
		if (stack->number_in_a < 4)
			quicky_sort(stack);
		else
			naive_algo(stack);
	}
	if (stack->number_of_moves)
		ft_printf("Moves required : [%[[FG_GRE,SP_RST]d]\n", stack->n_moves);
	if (stack->end_status)
		print_stack(&stack->a_begin, stack->number_in_a, 'a', stack->color);
	if (!stack->no_command)
		print_command(stack);
	free_stack(stack);
}
开发者ID:Lexouu77,项目名称:42Projects,代码行数:20,代码来源:resolve.c


示例5: ArrayTest8

void ArrayTest8(ostream & buffer)
{
    buffer << "\r\nArrays: String Object Example"
              "\r\n-----------------------------\r\n";

    SimpleArray<SimpleStr> sa(10);

    sa[0] = SimpleStr("Zero");
    sa[1] = "One";
    sa[2] = "Two";
    sa[3] = "Three";
    sa[4] = "Four";
    sa[5] = "Five";
    sa[6] = "Six";
    sa[7] = "Seven";
    sa[8] = "Eight";
    sa[9] = "Nine";

    buffer << "String array test = " << sa << "\r\n";
}
开发者ID:heavilessrose,项目名称:my-sync,代码行数:20,代码来源:simplearray.cpp


示例6: main

void main()
{
	int a[20], i, e;
	printf("enter size of array\t");
	scanf("%d", &n);
	if (n >0)
	{
		printf("enter array elements:");
		for (i = 0; i < n; i++)
			scanf("%d", &a[i]);
		printf("enter the element\t");
		scanf("%d", &e);
		sa(a, e);
		printf("modified array\n");
		for (i = 0; i < n; i++)
			printf("%d\t", a[i]);
	}
	else
		printf("invalid size");
}
开发者ID:Saitejaparsi,项目名称:mrnd2016,代码行数:20,代码来源:Sorted_array_insertion.c


示例7: construct_sa

void construct_sa(cache_config& config)
{
    static_assert(t_width == 0 or t_width == 8 , "construct_sa: width must be `0` for integer alphabet and `8` for byte alphabet");
    const char* KEY_TEXT = key_text_trait<t_width>::KEY_TEXT;
    if (t_width == 8) {
        typedef int_vector<t_width> text_type;
        text_type text;
        load_from_cache(text, KEY_TEXT, config);
        // call divsufsort
        int_vector<> sa(text.size(), 0, bits::hi(text.size())+1);
        algorithm::calculate_sa((const unsigned char*)text.data(), text.size(), sa);
        store_to_cache(sa, conf::KEY_SA, config);
    } else if (t_width == 0) {
        // call qsufsort
        int_vector<> sa;
        sdsl::qsufsort::construct_sa(sa, config.file_map[KEY_TEXT].c_str(), 0);
        store_to_cache(sa, conf::KEY_SA, config);
    } else {
        std::cerr << "Unknown alphabet type" << std::endl;
    }
}
开发者ID:chenlonggang,项目名称:sdsl-lite,代码行数:21,代码来源:construct_sa.hpp


示例8: index_csa_psi_text

    /*!
     * Constructor for building the Index
     * \param[in] str C-string of the text
     */
    index_csa_psi_text(const unsigned char *str) : index() {

        size_t n = strlen((const char*)str);
        int_vector<> sa(n+1, 0, bit_magic::l1BP(n+1)+1);
        algorithm::calculate_sa(str, n+1, sa);   // calculate the suffix array sa of str
        int_vector<> m_psi;
        sdsl::algorithm::sa2psi(sa, m_psi);
        psi = EncVector(m_psi);
        setText(str, n+1);

        text = int_vector<>(sa.size(), 0, bit_magic::l1BP(sigma)+1);
        for (size_t i=0; i<sa.size(); i++) text[i] = char2comp[str[i]];

        /* Construct the SA-Samples */
        m_sa_sample.setIntWidth( bit_magic::l1BP(sa.size())+1 );
        m_sa_sample.resize( (sa.size()+SampleDens-1)/SampleDens );
        size_t i=0, idx=0;
        for(int_vector<>::const_iterator it = sa.begin(); i < sa.size(); it += (ptrdiff_t)SampleDens, i += SampleDens, ++idx) {
            m_sa_sample[idx] = *it;
        }
    }
开发者ID:cpockrandt,项目名称:pr_dict_cmp,代码行数:25,代码来源:index_csa_psi_text.hpp


示例9: btwEncode

vector<int> btwEncode(const vector<int> &src) {
    // O(n*lgn*lgn). probably faster than O(n*lgn) version
    int len = src.size();
    vector<int> sa(len), rank(len);
    for(int i=0; i<len; ++i) rank[sa[i] = i] = src[i];
    for(int ll=1, cnt=0; cnt!=len; ll<<=1, cnt=rank[sa.back()]+1) {
        auto cmp = [&](const int l, const int r) {
            if( rank[l]!=rank[r] ) return rank[l] < rank[r];
            return rank[(l+ll)%len] < rank[(r+ll)%len];
        };
        sort(sa.begin(), sa.end(), cmp);
        vector<int> tmp = rank;
        tmp[sa[0]] = 0;
        for(int i=1; i<sa.size(); ++i)
            tmp[sa[i]] = tmp[sa[i-1]] + cmp(sa[i-1], sa[i]);
        rank = tmp;
    }
    vector<int> rst(len);
    for(int i=0; i<len; ++i) rst[i] = src[(sa[i]+len-1)%len];
    return rst;
}
开发者ID:sunset1995,项目名称:ACM_ICPC_codebook,代码行数:21,代码来源:String_BWT.cpp


示例10: GetSuffixArray

// O(N(lgN)^2)
std::vector<int> GetSuffixArray(const std::string& s) {
  // sa, group, t
  std::vector<int> sa(s.size());
  for (int i = 0; i < s.size(); ++i)
    sa[i] = i;
  std::vector<int> group(s.size()+1, -1);
  for (int i = 0; i < s.size(); ++i)
    group[i] = s[i];
  int t = 1;

  while (true) {
    printf("[%d] ---------------------------------------\n", t);

    // sort suffix array
    Comp c(s, group, t);
    std::sort(sa.begin(), sa.end(), c);
    printf("[%d] =======================================\n", t);
    // PrintSuffixArray(s, sa);

    // make new t
    t *= 2;
    // base condition
    if (t >= s.size())
      break;

    // make new group for 2t
    std::vector<int> group2(s.size() + 1, -1);
    group2[sa[0]] = 0;
    for (int i = 1; i < s.size(); ++i) {
      if (c(sa[i-1], sa[i]))
        group2[sa[i]] = group2[sa[i-1]] + 1;
      else
        group2[sa[i]] = group2[sa[i-1]];
    }
    group = group2;
  }

  return sa;
}
开发者ID:iamslash,项目名称:dsalgorithm,代码行数:40,代码来源:a.cpp


示例11: fill_a

void	fill_a(t_algo *algo, t_info *info)
{
	t_list	*last_a;

	last_a = get_last(algo->stack_a);
	while (algo->stack_b && (algo->op_count < info->in_count))
	{
		if ((algo->stack_b->next
			&& *(int*)algo->stack_b->data < *(int*)algo->stack_b->next->data)
			&& (algo->stack_a->next
			&& *(int*)algo->stack_a->data > *(int*)algo->stack_a->next->data))
			ss(algo);
		if (algo->stack_b->next
			&& *(int*)algo->stack_b->data < *(int*)algo->stack_b->next->data)
			sb(algo);
		if (algo->stack_a->next
			&& *(int*)algo->stack_a->data > *(int*)algo->stack_a->next->data)
			sa(algo);
		pa(algo);
		last_a = get_last(algo->stack_a);
	}
}
开发者ID:deandt100,项目名称:push_swap,代码行数:22,代码来源:split_sort.c


示例12: _MEMBER_FUNCTION_IMPL

_MEMBER_FUNCTION_IMPL( XmlNode, SetAttribute )
{
	StackHandler sa(v);
	_CHECK_SELF( TiXmlNode, XmlNode );

	const char* szAttribute = (const char*)sa.GetString( 2 );

	const char* szValue = (const char*)sa.GetString( 3 );

	TiXmlElement* pNode = (TiXmlElement*)self;

	if ( pNode )
	{
		pNode->SetAttribute( szAttribute, szValue );

		sa.Return( true );
		return 1;
	}

	sa.Return( false );
	return 1;
}
开发者ID:jack9267,项目名称:vcmpserver,代码行数:22,代码来源:SQXmlFuncs.cpp


示例13: sa

//-----------------------------------------------------------------------------
// Name: SendVoiceMessage
// Desc: Sends a voice message over the network, to everyone (NULL) or a
//		 specific recipient.
//-----------------------------------------------------------------------------
int CVoiceManager::SendVoiceMessage( const VoiceMessage* pMsg, const CXBSockAddr* psaDest )
{
	int nBytes = 0;

	// Non-reliable message - these get sent directly via VDP in all cases
	if( psaDest )
	{
		// If destined for a specific player, send straight to them
		nBytes += m_DirectSock.SendTo( pMsg, pMsg->GetSize(), psaDest->GetPtr() );
	}
	else
	{
		// Send to our current list of voice targets:
		for( int i = 0; i < numVoiceTargets; ++i )
		{
			CXBSockAddr sa( xbOnlineInfo.xbPlayerList[voiceTargets[i].index].inAddr, DIRECT_PORT );
			nBytes += m_DirectSock.SendTo( pMsg, pMsg->GetSize(), sa.GetPtr() );
		}
	}

	return nBytes;
}
开发者ID:3ddy,项目名称:Jedi-Academy,代码行数:27,代码来源:XBVoice.cpp


示例14: checker_calc

int			checker_calc(t_e *e)
{
	char	*line;

	while (get_next_line(0, &line) != 0)
	{
		if (ft_strcmp("sa", line) == 0)
			sa(e->l_a);
		else if (ft_strcmp("sb", line) == 0)
			sb(e->l_b);
		else if (ft_strcmp("ss", line) == 0)
			ss(e->l_a, e->l_b);
		else if (ft_strcmp("ra", line) == 0)
			ra(e->l_a);
		else if (ft_strcmp("rb", line) == 0)
			rb(e->l_b);
		else if (ft_strcmp("rr", line) == 0)
			rr(e->l_a, e->l_b);
		else if (ft_strcmp("rra", line) == 0)
			rra(e->l_a);
		else if (ft_strcmp("rrb", line) == 0)
			rrb(e->l_b);
		else if (ft_strcmp("rrr", line) == 0)
			rrr(e->l_a, e->l_b);
		else if (ft_strcmp("pa", line) == 0)
			pa(e->l_a, e->l_b);
		else if (ft_strcmp("pb", line) == 0)
			pb(e->l_a, e->l_b);
		else
		{
			ft_putendl_fd("Error", 2);
			ft_memdel((void **)&line);
			return (0);
		}
		ft_memdel((void **)&line);
	}
	return (1);
}
开发者ID:ajuber,项目名称:project-push_swap3,代码行数:38,代码来源:main_checker.c


示例15: lock

const HostEntry& DNS::hostByAddress(const IPAddress& address)
{
	FastMutex::ScopedLock lock(_mutex);

#if defined(_WIN32) && defined(POCO_HAVE_IPv6)
	SocketAddress sa(address, 0);
	static char fqname[1024];
	if (getnameinfo(sa.addr(), sa.length(), fqname, sizeof(fqname), NULL, 0, 0) == 0)
	{
		DNSCache::const_iterator it = _cache.find(std::string(fqname));
		if (it != _cache.end())
		{
			return it->second;
		}
		else
		{
			struct addrinfo* pAI;
			struct addrinfo hints;
			memset(&hints, 0, sizeof(hints));
			if (getaddrinfo(fqname, NULL, &hints, &pAI) == 0)
			{
				std::pair<DNSCache::iterator, bool> res = _cache.insert(std::pair<std::string, HostEntry>(std::string(fqname), HostEntry(pAI)));
				freeaddrinfo(pAI);
				return res.first->second;
			}
		}
	}
#else
	struct hostent* he = gethostbyaddr(reinterpret_cast<const char*>(address.addr()), address.length(), address.af());
	if (he)
	{
		std::pair<DNSCache::iterator, bool> res = _cache.insert(std::pair<std::string, HostEntry>(std::string(he->h_name), HostEntry(he)));
		return res.first->second;
	}
#endif
	error(lastError(), address.toString());      // will throw an appropriate exception
	throw NetException(); // to silence compiler
}
开发者ID:carvalhomb,项目名称:tsmells,代码行数:38,代码来源:DNS.cpp


示例16: IndexError

template< class T > T Correlation< T >::operator () (const vector < T > & a, const vector < T > & b) const
{
	static char F_Name[] = "template< class T > T Correlation< T >::operator () (const vector < T > & a, const vector < T > & b) const";
  if(a.size() != b.size()) {
    TKVPairList kvlist;
    kvlist.push_back(TKVPair("Size", a.size()));
    kvlist.push_back(TKVPair("Size", b.size()));
    throw IndexError(F_Name, kvlist);
  }

  T av_a, av_b, d_a, d_b, sp(0), sa(0), sb(0);
  av_a = average(a);
  av_b = average(b);

  for(unsigned i=0; i<a.size(); i++) {
    d_a = a[i] - av_a;
    d_b = b[i] - av_b;
    sp += d_a * d_b;
    sa += SQR(d_a);
    sb += SQR(d_b);
  }
  return sp / sqrt(sa * sb);
}
开发者ID:proofy,项目名称:boss,代码行数:23,代码来源:dsp_distances.cpp


示例17: buildSuffixArray

vector<int> buildSuffixArray(const vector<int> &str, int endOfString=-1) {
    // sa: i -> start position of str
    // O(n*lgn*lgn). probably faster than O(n*lgn) version
    int len = str.size();
    vector<int> sa(len+1), rank(len+1);
    for(int i=0; i<len; ++i) rank[sa[i] = i] = str[i];
    rank[sa.back() = len] = endOfString;
    for(int ll=1, cnt=0; cnt!=len; ll<<=1, cnt=rank[sa.back()]) {
        auto cmp = [&](const int l, const int r) {
            if( rank[l]!=rank[r] ) return rank[l] < rank[r];
            int lv = (l+ll < len) ? rank[l+ll] : 0;
            int rv = (r+ll < len) ? rank[r+ll] : 0;
            return lv < rv;
        };
        sort(sa.begin(), sa.end(), cmp);
        vector<int> tmp = rank;
        tmp[sa[0]] = 0;
        for(int i=1; i<sa.size(); ++i)
            tmp[sa[i]] = tmp[sa[i-1]] + cmp(sa[i-1], sa[i]);
        rank = tmp;
    }
    return sa;
}
开发者ID:sunset1995,项目名称:ACM_ICPC_codebook,代码行数:23,代码来源:String_Suffix_Array.cpp


示例18: checktwolast

void	checktwolast(t_ps *ps)
{
	t_dnode *current;
	t_dnode *prev;

	if (stacklen(ps->stacka) > 4)
	{
		current = ps->stacka->list;
		while (current->next)
		{
			prev = current;
			current = current->next;
		}
		if (prev->value > current->value)
		{
			rra(ps);
			rra(ps);
			sa(ps);
			ra(ps);
			ra(ps);
		}
	}
}
开发者ID:Denis2222,项目名称:push_swap,代码行数:23,代码来源:algobubble.c


示例19: ft_put_sol

void		ft_put_sol(unsigned int i, char op, t_swap **ba, t_swap **bb)
{
	if (i / 8)
		ft_put_sol(i / 8, op, ba, bb);
	if (i % 8 == 0)
	{
		ft_putstr("sa ");
		op ? sa(ba) : 0;
	}
	else if (i % 8 == 1)
	{
		ft_putstr("ra ");
		op ? ra(ba) : 0;
	}
	else if (i % 8 == 2)
	{
		ft_putstr("rra ");
		op ? rra(ba) : 0;
	}
	ft_suite_de_merde(i, op, ba, bb);
	op ? ft_print_list(*ba, 1) : 0;
	op ? ft_print_list(*bb, 0) : 0;
}
开发者ID:anasse82,项目名称:push_swap,代码行数:23,代码来源:ft_algo_bf.c


示例20: ipToAddrs

    vector<SockAddr> ipToAddrs(const char* ips, int port, bool useUnixSockets) {
        vector<SockAddr> out;
        if (*ips == '\0') {
            out.push_back(SockAddr("0.0.0.0", port)); // IPv4 all

            if (IPv6Enabled())
                out.push_back(SockAddr("::", port)); // IPv6 all
#ifndef _WIN32
            if (useUnixSockets)
                out.push_back(SockAddr(makeUnixSockPath(port).c_str(), port)); // Unix socket
#endif
            return out;
        }

        while(*ips) {
            string ip;
            const char * comma = strchr(ips, ',');
            if (comma) {
                ip = string(ips, comma - ips);
                ips = comma + 1;
            }
            else {
                ip = string(ips);
                ips = "";
            }

            SockAddr sa(ip.c_str(), port);
            out.push_back(sa);

#ifndef _WIN32
            if (useUnixSockets && (sa.getAddr() == "127.0.0.1" || sa.getAddr() == "0.0.0.0")) // only IPv4
                out.push_back(SockAddr(makeUnixSockPath(port).c_str(), port));
#endif
        }
        return out;

    }
开发者ID:Desartstudio,项目名称:mongo-nonx86,代码行数:37,代码来源:listen.cpp



注:本文中的sa函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ sa1100_map_io函数代码示例发布时间:2022-05-30
下一篇:
C++ s_wsle函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap