C++ sDecodeRXMessage函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sDecodeRXMessage函数的典型用法代码示例。如果您正苦于以下问题：C++ sDecodeRXMessage函数的具体用法？C++ sDecodeRXMessage怎么用？C++ sDecodeRXMessage使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sDecodeRXMessage函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: while

bool RFXComTCP::onInternalMessage(const unsigned char *pBuffer, const size_t Len)
{
	if (!m_bEnableReceive)
		return true; //receiving not enabled

	size_t ii = 0;
	while (ii < Len)
	{
		if (m_rxbufferpos == 0)	//1st char of a packet received
		{
			if (pBuffer[ii] == 0) //ignore first char if 00
				return true;
		}
		m_rxbuffer[m_rxbufferpos] = pBuffer[ii];
		m_rxbufferpos++;
		if (m_rxbufferpos >= sizeof(m_rxbuffer))
		{
			//something is out of sync here!!
			//restart
			_log.Log(LOG_ERROR, "input buffer out of sync, going to restart!....");
			m_rxbufferpos = 0;
			return false;
		}
		if (m_rxbufferpos > m_rxbuffer[0])
		{
			if (!m_bReceiverStarted)
			{
				if (m_rxbuffer[1] == pTypeInterfaceMessage)
				{
					const tRBUF *pResponse = (tRBUF *)&m_rxbuffer;
					if (pResponse->IRESPONSE.subtype == cmdStartRec)
					{
						m_bReceiverStarted = strstr((char*)&pResponse->IRESPONSE.msg1, "Copyright RFXCOM") != NULL;
					}
					else
					{
						_log.Log(LOG_STATUS, "RFXCOM: Please upgrade your RFXTrx Firmware!...");
						m_bReceiverStarted = true;
					}
				}
			}
			else
				sDecodeRXMessage(this, (const unsigned char *)&m_rxbuffer);//decode message
			m_rxbufferpos = 0;    //set to zero to receive next message
		}
		ii++;
	}
	return true;
}

开发者ID:htlinux，项目名称:domoticza，代码行数:49，代码来源:RFXComTCP.cpp

示例2: memset

void CDomoticzHardwareBase::SendUVSensor(const int NodeID, const int ChildID, const int BatteryLevel, const float UVI)
{
	RBUF tsen;
	memset(&tsen, 0, sizeof(RBUF));
	tsen.UV.packetlength = sizeof(tsen.UV) - 1;
	tsen.UV.packettype = pTypeUV;
	tsen.UV.subtype = sTypeUV1;
	tsen.UV.battery_level = BatteryLevel;
	tsen.UV.rssi = 12;
	tsen.UV.id1 = (unsigned char)NodeID;
	tsen.UV.id2 = (unsigned char)ChildID;

	tsen.UV.uv = (BYTE)round(UVI * 10);
	sDecodeRXMessage(this, (const unsigned char *)&tsen.UV);
}

开发者ID:remb0，项目名称:domoticz，代码行数:15，代码来源:DomoticzHardware.cpp

示例3: memset

void Meteostick::SendUVSensor(const unsigned char Idx, const float UV, const std::string &defaultname)
{
	RBUF tsen;
	memset(&tsen, 0, sizeof(RBUF));
	tsen.UV.packetlength = sizeof(tsen.UV) - 1;
	tsen.UV.packettype = pTypeUV;
	tsen.UV.subtype = sTypeUV1;
	tsen.UV.battery_level = 9;
	tsen.UV.rssi = 12;
	tsen.UV.id1 = 0;
	tsen.UV.id2 = Idx;

	tsen.UV.uv = (BYTE)round(UV * 10);
	sDecodeRXMessage(this, (const unsigned char *)&tsen.UV, defaultname.c_str());
}

开发者ID:karekaa，项目名称:domoticz，代码行数:15，代码来源:Meteostick.cpp

示例4: int

void CSterbox::UpdateSwitch(const unsigned char Idx, const int SubUnit, const bool bOn, const double Level, const std::string &defaultname)
{
	double rlevel = (15.0 / 100)*Level;
	int level = int(rlevel);

	char szIdx[10];
	sprintf(szIdx, "%X%02X%02X%02X", 0, 0, 0, Idx);
	std::vector<std::vector<std::string> > result;
	result = m_sql.safe_query("SELECT Name,nValue,sValue FROM DeviceStatus WHERE (HardwareID==%d) AND (DeviceID=='%q') AND (Unit==%d)", m_HwdID, szIdx, SubUnit);
	if (!result.empty())
	{
		//check if we have a change, if not do not update it
		int nvalue = atoi(result[0][1].c_str());
		if ((!bOn) && (nvalue == 0))
			return;
		if ((bOn && (nvalue != 0)))
		{
			//Check Level
			int slevel = atoi(result[0][2].c_str());
			if (slevel == level)
				return;
		}
	}

	//Send as Lighting 2
	tRBUF lcmd;
	memset(&lcmd, 0, sizeof(RBUF));
	lcmd.LIGHTING2.packetlength = sizeof(lcmd.LIGHTING2) - 1;
	lcmd.LIGHTING2.packettype = pTypeLighting2;
	lcmd.LIGHTING2.subtype = sTypeAC;
	lcmd.LIGHTING2.id1 = 0;
	lcmd.LIGHTING2.id2 = 0;
	lcmd.LIGHTING2.id3 = 0;
	lcmd.LIGHTING2.id4 = Idx;
	lcmd.LIGHTING2.unitcode = SubUnit;
	if (!bOn)
	{
		lcmd.LIGHTING2.cmnd = light2_sOff;
	}
	else
	{
		lcmd.LIGHTING2.cmnd = light2_sOn;
	}
	lcmd.LIGHTING2.level = level;
	lcmd.LIGHTING2.filler = 0;
	lcmd.LIGHTING2.rssi = 12;
	sDecodeRXMessage(this, (const unsigned char *)&lcmd.LIGHTING2, defaultname.c_str(), 255);
}

开发者ID:PatMart，项目名称:domoticz，代码行数:48，代码来源:Sterbox.cpp

示例5: sprintf

void CDomoticzHardwareBase::SendTempHumBaroSensorFloat(const int NodeID, const int BatteryLevel, const float temperature, const int humidity, const float pressure, int forecast, const std::string &defaultname)
{
	char szIdx[10];
	sprintf(szIdx, "%d", NodeID & 0xFFFF);
	int Unit = NodeID & 0xFF;

	std::vector<std::vector<std::string> > result;
	bool bDeviceExits = true;
	result = m_sql.safe_query("SELECT Name FROM DeviceStatus WHERE (HardwareID==%d) AND (DeviceID=='%q') AND (Unit == %d) AND (Type==%d) AND (Subtype==%d)",
		m_HwdID, szIdx, Unit, int(pTypeTEMP_HUM_BARO), int(sTypeTHBFloat));
	if (result.size() < 1)
	{
		bDeviceExits = false;
	}

	RBUF tsen;
	memset(&tsen, 0, sizeof(RBUF));
	tsen.TEMP_HUM_BARO.packetlength = sizeof(tsen.TEMP_HUM_BARO) - 1;
	tsen.TEMP_HUM_BARO.packettype = pTypeTEMP_HUM_BARO;
	tsen.TEMP_HUM_BARO.subtype = sTypeTHBFloat;
	tsen.TEMP_HUM_BARO.battery_level = 9;
	tsen.TEMP_HUM_BARO.rssi = 12;
	tsen.TEMP_HUM_BARO.id1 = (NodeID & 0xFF00) >> 8;
	tsen.TEMP_HUM_BARO.id2 = NodeID & 0xFF;

	tsen.TEMP_HUM_BARO.tempsign = (temperature >= 0) ? 0 : 1;
	int at10 = round(abs(temperature*10.0f));
	tsen.TEMP_HUM_BARO.temperatureh = (BYTE)(at10 / 256);
	at10 -= (tsen.TEMP_HUM_BARO.temperatureh * 256);
	tsen.TEMP_HUM_BARO.temperaturel = (BYTE)(at10);
	tsen.TEMP_HUM_BARO.humidity = (BYTE)humidity;
	tsen.TEMP_HUM_BARO.humidity_status = Get_Humidity_Level(tsen.TEMP_HUM.humidity);

	int ab10 = round(pressure*10.0f);
	tsen.TEMP_HUM_BARO.baroh = (BYTE)(ab10 / 256);
	ab10 -= (tsen.TEMP_HUM_BARO.baroh * 256);
	tsen.TEMP_HUM_BARO.barol = (BYTE)(ab10);
	tsen.TEMP_HUM_BARO.forecast = forecast;

	sDecodeRXMessage(this, (const unsigned char *)&tsen.TEMP_HUM_BARO);

	if (!bDeviceExits)
	{
		//Assign default name for device
		m_sql.safe_query("UPDATE DeviceStatus SET Name='%q' WHERE (HardwareID==%d) AND (DeviceID=='%q') AND (Unit == %d) AND (Type==%d) AND (Subtype==%d)",
			defaultname.c_str(), m_HwdID, szIdx, Unit, int(pTypeTEMP_HUM_BARO), int(sTypeTHBFloat));
	}
}

开发者ID:remb0，项目名称:domoticz，代码行数:48，代码来源:DomoticzHardware.cpp

示例6: int

void CDomoticzHardwareBase::SendRGBWSwitch(const int NodeID, const int ChildID, const int BatteryLevel, const double Level, const bool bIsRGBW, const std::string &defaultname)
{
	int level = int(Level);
	int subType = (bIsRGBW == true) ? sTypeLimitlessRGBW : sTypeLimitlessRGB;
	//Send as LimitlessLight
	_tLimitlessLights lcmd;
	lcmd.id = NodeID;
	lcmd.subtype = subType;
	if (level == 0)
		lcmd.command = Limitless_LedOff;
	else
		lcmd.command = Limitless_LedOn;
	lcmd.dunit = ChildID;
	lcmd.value = level;
	sDecodeRXMessage(this, (const unsigned char *)&lcmd, defaultname.c_str(), BatteryLevel);
}

开发者ID:interxis，项目名称:domoticz，代码行数:16，代码来源:DomoticzHardware.cpp

示例7: sDecodeRXMessage

void CGpio::UpdateSwitch(const int pin, const bool value)
{
	value ? IOPinStatusPacket.LIGHTING1.cmnd = light1_sOn : IOPinStatusPacket.LIGHTING1.cmnd = light1_sOff;
	IOPinStatusPacket.LIGHTING1.seqnbr++;
	IOPinStatusPacket.LIGHTING1.unitcode = pin;

	sDecodeRXMessage(this, (const unsigned char *)&IOPinStatusPacket, NULL, 255);

	for(std::vector<CGpioPin>::iterator it = pins.begin(); it != pins.end(); ++it)
	{
		if (it->GetPin() == pin)
		{
			it->SetDBState(value);
			break;
		}
	}
}

开发者ID:ldrolez，项目名称:domoticz，代码行数:17，代码来源:Gpio.cpp

示例8: memset

void C1Wire::ReportVoltage(int unit,int voltage)
{
	if (voltage == -1000.0)
		return;

	RBUF tsen;
	memset(&tsen,0,sizeof(RBUF));
	tsen.RFXSENSOR.packetlength=sizeof(tsen.RFXSENSOR)-1;
	tsen.RFXSENSOR.packettype=pTypeRFXSensor;
	tsen.RFXSENSOR.subtype=sTypeRFXSensorVolt;
	tsen.RFXSENSOR.rssi=12;
	tsen.RFXSENSOR.id=unit+1;

	tsen.RFXSENSOR.msg1 = (BYTE)(voltage/256);
	tsen.RFXSENSOR.msg2 = (BYTE)(voltage-(tsen.RFXSENSOR.msg1*256));
	sDecodeRXMessage(this, (const unsigned char *)&tsen.RFXSENSOR, NULL, 255);
}

开发者ID:gergles，项目名称:domoticz，代码行数:17，代码来源:1Wire.cpp

示例9: atoi

void CHarmonyHub::UpdateSwitch(unsigned char idx,const char * realID, const bool bOn, const std::string &defaultname)
{
	std::stringstream hexId ;
	hexId << std::setw(7) << std::setfill('0') << std::hex << std::uppercase << (int)( atoi(realID) );
	//char szIdx[10];
	//sprintf(szIdx, "%X%02X%02X%02X", 0, 0, 0, idx);
	std::vector<std::vector<std::string> > result;
	result = m_sql.safe_query("SELECT Name,nValue,sValue FROM DeviceStatus WHERE (HardwareID==%d) AND (DeviceID=='%q')", m_HwdID, hexId.str().c_str());
	if (!result.empty())
	{
		//check if we have a change, if not do not update it
		int nvalue = atoi(result[0][1].c_str());
		if ((!bOn) && (nvalue == light2_sOff))
			return;
		if ((bOn && (nvalue != light2_sOff)))
			return;
	}
	int i_Id = atoi( realID);
	//Send as Lighting 2
	tRBUF lcmd;
	memset(&lcmd, 0, sizeof(RBUF));
	lcmd.LIGHTING2.packetlength = sizeof(lcmd.LIGHTING2) - 1;
	lcmd.LIGHTING2.packettype = pTypeLighting2;
	lcmd.LIGHTING2.subtype = sTypeAC;

	lcmd.LIGHTING2.id1 = (i_Id>> 24) & 0xFF;
	lcmd.LIGHTING2.id2 = (i_Id>> 16) & 0xFF;
	lcmd.LIGHTING2.id3 = (i_Id>> 8) & 0xFF;
	lcmd.LIGHTING2.id4 = (i_Id) & 0xFF;
	lcmd.LIGHTING2.unitcode = 1;
	int level = 15;
	if (!bOn)
	{
		level = 0;
		lcmd.LIGHTING2.cmnd = light2_sOff;
	}
	else
	{
		level = 15;
		lcmd.LIGHTING2.cmnd = light2_sOn;
	}
	lcmd.LIGHTING2.level = level;
	lcmd.LIGHTING2.filler = 0;
	lcmd.LIGHTING2.rssi = 12;
	sDecodeRXMessage(this, (const unsigned char *)&lcmd.LIGHTING2, defaultname.c_str(), 255);
}

开发者ID:IgorYbema，项目名称:domoticz，代码行数:46，代码来源:HarmonyHub.cpp

示例10: defined

void C1Wire::ReportLightState(const std::string& deviceId, const int unit, const bool state)
{
#if defined(_DEBUG)
	_log.Log(LOG_STATUS, "device '%s' unit %d state is %s", deviceId.c_str(), unit, (state) ? "on" : "off");
#endif

// check - is state changed ?
	char num[16];
	sprintf(num, "%s/%d", deviceId.c_str(), unit);
	const std::string id(num);

	std::map<std::string, bool>::iterator it;
	it = m_LastSwitchState.find(id);
	if (it != m_LastSwitchState.end())
	{
		if (m_LastSwitchState[id] == state)
		{
			return;
		}
	}

#if defined(_DEBUG)
	_log.Log(LOG_STATUS, "device '%s' unit %d changed state to %s", deviceId.c_str(), unit, (state) ? "on" : "off");
#endif

	m_LastSwitchState[id] = state;

	unsigned char deviceIdByteArray[DEVICE_ID_SIZE]={0};
	DeviceIdToByteArray(deviceId,deviceIdByteArray);

	RBUF tsen;
	memset(&tsen,0,sizeof(RBUF));
	tsen.LIGHTING2.packetlength=sizeof(tsen.LIGHTING2)-1;
	tsen.LIGHTING2.packettype=pTypeLighting2;
	tsen.LIGHTING2.subtype=sTypeAC;
	tsen.LIGHTING2.seqnbr=0;
	tsen.LIGHTING2.id1=(BYTE)deviceIdByteArray[0];
	tsen.LIGHTING2.id2=(BYTE)deviceIdByteArray[1];
	tsen.LIGHTING2.id3=(BYTE)deviceIdByteArray[2];
	tsen.LIGHTING2.id4=(BYTE)deviceIdByteArray[3];
	tsen.LIGHTING2.unitcode=unit;
	tsen.LIGHTING2.cmnd=state?light2_sOn:light2_sOff;
	tsen.LIGHTING2.level=0;
	tsen.LIGHTING2.rssi=12;
	sDecodeRXMessage(this, (const unsigned char *)&tsen.LIGHTING2, NULL, 255);
}

开发者ID:dynasticorpheus，项目名称:domoticz，代码行数:46，代码来源:1Wire.cpp

示例11: WHERE

void Meteostick::SendTempBaroSensor(const unsigned char Idx, const float Temp, const float Baro, const std::string &defaultname)
{
	bool bDeviceExits = true;
	std::vector<std::vector<std::string> > result;
	result = m_sql.safe_query("SELECT Name FROM DeviceStatus WHERE (HardwareID==%d) AND (DeviceID==%d) AND (Type==%d) AND (Subtype==%d)", m_HwdID, int(Idx), int(pTypeTEMP_BARO), int(sTypeBMP085));
	if (result.size() < 1)
	{
		bDeviceExits = false;
	}

	//Calculate Pressure
	float altitude = 188.0f;	//Should be custom defined for each user

	float dTempGradient = 0.0065f;
	float dTempAtSea = (Temp - (-273.15f)) + dTempGradient * altitude;
	float dBasis = 1 - dTempGradient * altitude / dTempAtSea;
	float dExponent = 0.03416f / dTempGradient;
	float dPressure = Baro / pow(dBasis,dExponent);

	_tTempBaro tsensor;
	tsensor.id1 = Idx;
	tsensor.temp = Temp;
	tsensor.baro = dPressure;
	tsensor.altitude = float(altitude);

	//this is probably not good, need to take the rising/falling of the pressure into account?
	//any help would be welcome!

	tsensor.forecast = baroForecastNoInfo;
	if (tsensor.baro < 1000)
		tsensor.forecast = baroForecastRain;
	else if (tsensor.baro < 1020)
		tsensor.forecast = baroForecastCloudy;
	else if (tsensor.baro < 1030)
		tsensor.forecast = baroForecastPartlyCloudy;
	else
		tsensor.forecast = baroForecastSunny;
	sDecodeRXMessage(this, (const unsigned char *)&tsensor);

	if (!bDeviceExits)
	{
		//Assign default name for device
		m_sql.safe_query("UPDATE DeviceStatus SET Name='%q' WHERE (HardwareID==%d) AND (DeviceID==%d) AND (Type==%d) AND (Subtype==%d)", defaultname.c_str(), m_HwdID, int(Idx), int(pTypeTEMP_BARO), int(sTypeBMP085));
	}
}

开发者ID:remb0，项目名称:domoticz，代码行数:45，代码来源:Meteostick.cpp

示例12: sprintf

void CJabloDongle::SendSetPointSensor(int NodeID, const int BatteryLevel, const float Temp, const std::string &defaultname)
{
	bool bDeviceExits=true;
	std::stringstream szQuery;

	NodeID &= 0xFFFF; //To be consistent with TEMP packet, which has only 2 bytes for ID.

	//make device ID
	unsigned char ID1 = (unsigned char)((NodeID & 0xFF000000) >> 24);
	unsigned char ID2 = (unsigned char)((NodeID & 0xFF0000) >> 16);
	unsigned char ID3 = (unsigned char)((NodeID & 0xFF00) >> 8);
	unsigned char ID4 = (unsigned char)NodeID & 0xFF;

	char szIdx[30];
		sprintf(szIdx, "%X%02X%02X%02X", ID1, ID2, ID3, ID4);

	std::vector<std::vector<std::string> > result;
	szQuery << "SELECT Name FROM DeviceStatus WHERE (HardwareID==" << m_HwdID << ") AND (DeviceID=='" << szIdx << "')";
	result=m_sql.query(szQuery.str());
	if (result.size()<1)
	{
		bDeviceExits=false;
	}

	_tThermostat thermos;
	thermos.subtype=sTypeThermSetpoint;
	thermos.id1=ID1;
	thermos.id2=ID2;
	thermos.id3=ID3;
	thermos.id4=ID4;
	thermos.dunit=0;
	thermos.battery_level = (unsigned char)BatteryLevel;
	thermos.temp=Temp;

	sDecodeRXMessage(this, (const unsigned char *)&thermos);

	if (!bDeviceExits)
	{
		//Assign default name for device
		szQuery.clear();
		szQuery.str("");
		szQuery << "UPDATE DeviceStatus SET Name='" << defaultname << "' WHERE (HardwareID==" << m_HwdID << ") AND (DeviceID=='" << szIdx << "')";
		result=m_sql.query(szQuery.str());
	}
}

开发者ID:CZ-NIC，项目名称:domoticz-turris-gadgets，代码行数:45，代码来源:JabloDongle.cpp

示例13: sprintf

void CYouLess::GetMeterDetails()
{
	std::string sResult;

	char szURL[200];

	if(m_Password.size() == 0)
	{
		sprintf(szURL,"http://%s:%d/a",m_szIPAddress.c_str(), m_usIPPort);
	}
	else
	{
		sprintf(szURL,"http://%s:%d/a&w=%s",m_szIPAddress.c_str(), m_usIPPort, m_Password.c_str());
	}

	if (!HTTPClient::GET(szURL,sResult))
	{
		_log.Log(LOG_ERROR,"YouLess: Error connecting to: %s", m_szIPAddress.c_str());
		return;
	}

	std::vector<std::string> results;
	StringSplit(sResult, "\n", results);
	if (results.size()<2)
	{
		_log.Log(LOG_ERROR,"YouLess: Error connecting to: %s", m_szIPAddress.c_str());
		return;
	}
	int fpos;
	std::string pusage=stdstring_trim(results[0]);
	fpos=pusage.find_first_of(" ");
	if (fpos!=std::string::npos)
		pusage=pusage.substr(0,fpos);
	stdreplace(pusage,",","");

	std::string pcurrent=stdstring_trim(results[1]);
	fpos=pcurrent.find_first_of(" ");
	if (fpos!=std::string::npos)
		pcurrent=pcurrent.substr(0,fpos);
	stdreplace(pcurrent,",","");

	m_meter.powerusage=atol(pusage.c_str());
	m_meter.usagecurrent=atol(pcurrent.c_str());
	sDecodeRXMessage(this, (const unsigned char *)&m_meter);//decode message
}

开发者ID:n326，项目名称:domoticz，代码行数:45，代码来源:YouLess.cpp

示例14: sprintf

void CToonThermostat::UpdateSwitch(const unsigned char Idx, const bool bOn, const std::string &defaultname)
{
	bool bDeviceExits = true;
	char szIdx[10];
	sprintf(szIdx, "%X%02X%02X%02X", 0, 0, 0, Idx);
	std::vector<std::vector<std::string> > result;
	result = m_sql.safe_query("SELECT Name,nValue,sValue FROM DeviceStatus WHERE (HardwareID==%d) AND (Type==%d) AND (SubType==%d) AND (DeviceID=='%q')",
		m_HwdID, pTypeLighting2, sTypeAC, szIdx);
	if (!result.empty())
	{
		//check if we have a change, if not do not update it
		int nvalue = atoi(result[0][1].c_str());
		if ((!bOn) && (nvalue == 0))
			return;
		if ((bOn && (nvalue != 0)))
			return;
	}

	//Send as Lighting 2
	tRBUF lcmd;
	memset(&lcmd, 0, sizeof(RBUF));
	lcmd.LIGHTING2.packetlength = sizeof(lcmd.LIGHTING2) - 1;
	lcmd.LIGHTING2.packettype = pTypeLighting2;
	lcmd.LIGHTING2.subtype = sTypeAC;
	lcmd.LIGHTING2.id1 = 0;
	lcmd.LIGHTING2.id2 = 0;
	lcmd.LIGHTING2.id3 = 0;
	lcmd.LIGHTING2.id4 = Idx;
	lcmd.LIGHTING2.unitcode = 1;
	int level = 15;
	if (!bOn)
	{
		level = 0;
		lcmd.LIGHTING2.cmnd = light2_sOff;
	}
	else
	{
		level = 15;
		lcmd.LIGHTING2.cmnd = light2_sOn;
	}
	lcmd.LIGHTING2.level = level;
	lcmd.LIGHTING2.filler = 0;
	lcmd.LIGHTING2.rssi = 12;
	sDecodeRXMessage(this, (const unsigned char *)&lcmd.LIGHTING2, defaultname.c_str(), 255);
}

开发者ID:sbouchex，项目名称:domoticz，代码行数:45，代码来源:ToonThermostat.cpp

示例15: memset

void CDomoticzHardwareBase::SendMeterSensor(const int NodeID, const int ChildID, const int BatteryLevel, const float metervalue, const std::string &defaultname)
{
	unsigned long counter = (unsigned long)(metervalue*1000.0f);
	RBUF tsen;
	memset(&tsen, 0, sizeof(RBUF));
	tsen.RFXMETER.packetlength = sizeof(tsen.RFXMETER) - 1;
	tsen.RFXMETER.packettype = pTypeRFXMeter;
	tsen.RFXMETER.subtype = sTypeRFXMeterCount;
	tsen.RFXMETER.rssi = 12;
	tsen.RFXMETER.id1 = (BYTE)NodeID;
	tsen.RFXMETER.id2 = (BYTE)ChildID;

	tsen.RFXMETER.count1 = (BYTE)((counter & 0xFF000000) >> 24);
	tsen.RFXMETER.count2 = (BYTE)((counter & 0x00FF0000) >> 16);
	tsen.RFXMETER.count3 = (BYTE)((counter & 0x0000FF00) >> 8);
	tsen.RFXMETER.count4 = (BYTE)(counter & 0x000000FF);
	sDecodeRXMessage(this, (const unsigned char *)&tsen.RFXMETER, defaultname.c_str(), BatteryLevel);
}

开发者ID:interxis，项目名称:domoticz，代码行数:18，代码来源:DomoticzHardware.cpp

示例16: memset

void CDavisLoggerSerial::UpdateHumSensor(const unsigned char Idx, const int Hum)
{
	RBUF tsen;
	memset(&tsen,0,sizeof(RBUF));

	tsen.HUM.packetlength=sizeof(tsen.HUM)-1;
	tsen.HUM.packettype=pTypeHUM;
	tsen.HUM.subtype=sTypeHUM2;
	tsen.HUM.battery_level=9;
	tsen.HUM.rssi=12;
	tsen.HUM.id1=0;
	tsen.HUM.id2=Idx;

	tsen.HUM.humidity=(BYTE)Hum;
	tsen.HUM.humidity_status=Get_Humidity_Level(tsen.HUM.humidity);

	sDecodeRXMessage(this, (const unsigned char *)&tsen.HUM);//decode message
}

开发者ID:n326，项目名称:domoticz，代码行数:18，代码来源:DavisLoggerSerial.cpp

示例17: WHERE

void Meteostick::SendTempBaroSensor(const unsigned char Idx, const float Temp, const float Baro, const std::string &defaultname)
{
	bool bDeviceExits = true;
	std::stringstream szQuery;
	std::vector<std::vector<std::string> > result;
	szQuery << "SELECT Name FROM DeviceStatus WHERE (HardwareID==" << m_HwdID << ") AND (DeviceID==" << int(Idx) << ") AND (Type==" << int(pTypeTEMP_BARO) << ") AND (Subtype==" << int(sTypeBMP085) << ")";
	result = m_sql.query(szQuery.str());
	if (result.size() < 1)
	{
		bDeviceExits = false;
	}

	//Calculate Altitude
	double altitude = CalculateAltitudeFromPressure((double)Baro);
	_tTempBaro tsensor;
	tsensor.id1 = Idx;
	tsensor.temp = Temp;
	tsensor.baro = Baro;
	tsensor.altitude = float(altitude);

	//this is probably not good, need to take the rising/falling of the pressure into account?
	//any help would be welcome!

	tsensor.forecast = baroForecastNoInfo;
	if (tsensor.baro < 1000)
		tsensor.forecast = baroForecastRain;
	else if (tsensor.baro < 1020)
		tsensor.forecast = baroForecastCloudy;
	else if (tsensor.baro < 1030)
		tsensor.forecast = baroForecastPartlyCloudy;
	else
		tsensor.forecast = baroForecastSunny;
	sDecodeRXMessage(this, (const unsigned char *)&tsensor);

	if (!bDeviceExits)
	{
		//Assign default name for device
		szQuery.clear();
		szQuery.str("");
		szQuery << "UPDATE DeviceStatus SET Name='" << defaultname << "' WHERE (HardwareID==" << m_HwdID << ") AND (DeviceID==" << int(Idx) << ") AND (Type==" << int(pTypeTEMP_BARO) << ") AND (Subtype==" << int(sTypeBMP085) << ")";
		result = m_sql.query(szQuery.str());
	}
}

开发者ID:ZaaaV，项目名称:domoticz，代码行数:43，代码来源:Meteostick.cpp

示例18: DeviceIdToByteArray

void C1Wire::ReportHumidity(const std::string& deviceId,float humidity)
{
   unsigned char deviceIdByteArray[DEVICE_ID_SIZE]={0};
   DeviceIdToByteArray(deviceId,deviceIdByteArray);

   RBUF tsen;
   memset(&tsen,0,sizeof(RBUF));
   tsen.HUM.packetlength=sizeof(tsen.HUM)-1;
   tsen.HUM.packettype=pTypeHUM;
   tsen.HUM.subtype=sTypeHUM2;
   tsen.HUM.battery_level=9;
   tsen.HUM.rssi=12;
   tsen.TEMP.id1=(BYTE)deviceIdByteArray[0];
   tsen.TEMP.id2=(BYTE)deviceIdByteArray[1];

   tsen.HUM.humidity=(BYTE)round(humidity);
   tsen.HUM.humidity_status=Get_Humidity_Level(tsen.HUM.humidity);

   sDecodeRXMessage(this, (const unsigned char *)&tsen.HUM);//decode message
}

开发者ID:ZaaaV，项目名称:domoticz，代码行数:20，代码来源:1Wire.cpp

示例19: DeviceIdToByteArray

void C1Wire::ReportCounter(const std::string& deviceId,int unit,unsigned long counter)
{
	unsigned char deviceIdByteArray[DEVICE_ID_SIZE]={0};
	DeviceIdToByteArray(deviceId,deviceIdByteArray);

	RBUF tsen;
	memset(&tsen,0,sizeof(RBUF));
	tsen.RFXMETER.packetlength=sizeof(tsen.RFXMETER)-1;
	tsen.RFXMETER.packettype=pTypeRFXMeter;
	tsen.RFXMETER.subtype=sTypeRFXMeterCount;
	tsen.RFXMETER.rssi=12;
	tsen.RFXMETER.id1=(BYTE)deviceIdByteArray[0];
	tsen.RFXMETER.id2=(BYTE)deviceIdByteArray[1] + unit;

	tsen.RFXMETER.count1 = (BYTE)((counter & 0xFF000000) >> 24);
	tsen.RFXMETER.count2 = (BYTE)((counter & 0x00FF0000) >> 16);
	tsen.RFXMETER.count3 = (BYTE)((counter & 0x0000FF00) >> 8);
	tsen.RFXMETER.count4 = (BYTE)(counter & 0x000000FF);
	sDecodeRXMessage(this, (const unsigned char *)&tsen.RFXMETER, NULL, 255);
}

开发者ID:gergles，项目名称:domoticz，代码行数:20，代码来源:1Wire.cpp

示例20: memset

void CHardwareMonitor::SendTempSensor(const int Idx, const float Temp, const std::string &defaultname)
{
	RBUF tsen;
	memset(&tsen, 0, sizeof(RBUF));

	tsen.TEMP.packetlength = sizeof(tsen.TEMP) - 1;
	tsen.TEMP.packettype = pTypeTEMP;
	tsen.TEMP.subtype = sTypeTEMP10;
	tsen.TEMP.battery_level = 9;
	tsen.TEMP.rssi = 12;
	tsen.TEMP.id1 = (unsigned char)(Idx>>8);
	tsen.TEMP.id2 = (unsigned char)Idx&0xFF;

	tsen.TEMP.tempsign = (Temp >= 0) ? 0 : 1;
	int at10 = round(abs(Temp*10.0f));
	tsen.TEMP.temperatureh = (BYTE)(at10 / 256);
	at10 -= (tsen.TEMP.temperatureh * 256);
	tsen.TEMP.temperaturel = (BYTE)(at10);

	sDecodeRXMessage(this, (const unsigned char *)&tsen.TEMP, defaultname.c_str(), 255);
}

开发者ID:gergles，项目名称:domoticz，代码行数:21，代码来源:HardwareMonitor.cpp

注：本文中的sDecodeRXMessage函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sDelete函数代码示例发布时间：2022-05-30

C++ sCopy函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19166|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8321|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ sDecodeRXMessage函数代码示例

示例1: while

示例2: memset

示例3: memset

示例4: int

示例5: sprintf

示例6: int

示例7: sDecodeRXMessage

示例8: memset

示例9: atoi

示例10: defined

示例11: WHERE

示例12: sprintf

示例13: sprintf

示例14: sprintf

示例15: memset

示例16: memset

示例17: WHERE

示例18: DeviceIdToByteArray

示例19: DeviceIdToByteArray

示例20: memset

请发表评论

全部评论

上一篇：

下一篇：

Ubuntu14.04下安装matlab2014a

bradtraversy/iweather: Ionic 3 mobile we

CVE-2020-27732

joaomh/curso-de-matlab

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053