C++ s3c_i2c1_set_platdata函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中s3c_i2c1_set_platdata函数的典型用法代码示例。如果您正苦于以下问题：C++ s3c_i2c1_set_platdata函数的具体用法？C++ s3c_i2c1_set_platdata怎么用？C++ s3c_i2c1_set_platdata使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了s3c_i2c1_set_platdata函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: smdkv310_machine_init

static void __init smdkv310_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkv310_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);

	samsung_keypad_set_platdata(&smdkv310_keypad_data);

	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);

	smdkv310_ehci_init();
	smdkv310_ohci_init();
	clk_xusbxti.rate = 24000000;

	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}

开发者ID:DamonDeng，项目名称:linux，代码行数:26，代码来源:mach-smdkv310.c

示例2: smdkv310_machine_init

static void __init smdkv310_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkv310_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);

	samsung_keypad_set_platdata(&smdkv310_keypad_data);

	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
#ifdef CONFIG_DRM_EXYNOS
	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
	exynos4_fimd0_gpio_setup_24bpp();
#else
	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
#endif

	smdkv310_ehci_init();
	smdkv310_ohci_init();
	clk_xusbxti.rate = 24000000;

	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}

开发者ID:250bpm，项目名称:linux，代码行数:31，代码来源:mach-smdkv310.c

示例3: omnia_II_machine_init

static void __init omnia_II_machine_init(void)
{

//	system_rev = 0x20;
	s3c_config_gpio_table(ARRAY_SIZE(omnia_II_init_gpio_table),
		omnia_II_init_gpio_table);
	
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);

	s3c_ts_set_platdata(&s3c_ts_platform);

	init_spi();

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
	i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
	i2c_register_board_info(3, i2c_devs3, ARRAY_SIZE(i2c_devs3));

	s3c6410_add_mem_devices (&pmem_setting);

	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
	s3c6410_pm_init();
	omnia_II_set_qos();
	s3c6410_wdt_io_map();
	omnia_II_switch_init();
	wake_lock_init(&wlan_wakelock, WAKE_LOCK_SUSPEND, "wlan");
}

开发者ID:kgp700，项目名称:omnia2-android-26329，代码行数:28，代码来源:omnia_II.c

示例4: smdk4x12_machine_init

static void __init smdk4x12_machine_init(void)
{
	s3c_i2c0_set_platdata(NULL);
	i2c_register_board_info(0, smdk4x12_i2c_devs0,
				ARRAY_SIZE(smdk4x12_i2c_devs0));

	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, smdk4x12_i2c_devs1,
				ARRAY_SIZE(smdk4x12_i2c_devs1));

	s3c_i2c3_set_platdata(NULL);
	i2c_register_board_info(3, smdk4x12_i2c_devs3,
				ARRAY_SIZE(smdk4x12_i2c_devs3));

	s3c_i2c7_set_platdata(NULL);
	i2c_register_board_info(7, smdk4x12_i2c_devs7,
				ARRAY_SIZE(smdk4x12_i2c_devs7));

	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);

	samsung_keypad_set_platdata(&smdk4x12_keypad_data);

	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);

	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
}

开发者ID:250bpm，项目名称:linux，代码行数:27，代码来源:mach-smdk4x12.c

示例5: smdkv210_machine_init

static void __init smdkv210_machine_init(void)
{
	s3c_pm_init();

	smdkv210_dm9000_init();

	samsung_keypad_set_platdata(&smdkv210_keypad_data);
	s3c24xx_ts_set_platdata(&s3c_ts_platform);

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(0, smdkv210_i2c_devs0,
			ARRAY_SIZE(smdkv210_i2c_devs0));
	i2c_register_board_info(1, smdkv210_i2c_devs1,
			ARRAY_SIZE(smdkv210_i2c_devs1));
	i2c_register_board_info(2, smdkv210_i2c_devs2,
			ARRAY_SIZE(smdkv210_i2c_devs2));

	s3c_ide_set_platdata(&smdkv210_ide_pdata);

	s3c_fb_set_platdata(&smdkv210_lcd0_pdata);

	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);

	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}

开发者ID:GerardGarcia，项目名称:linux，代码行数:27，代码来源:mach-smdkv210.c

示例6: smdkc100_machine_init

static void __init smdkc100_machine_init(void)
{
	s3c24xx_ts_set_platdata(&s3c_ts_platform);

	/* I2C */
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
	s3c_ide_set_platdata(&smdkc100_ide_pdata);

	samsung_keypad_set_platdata(&smdkc100_keypad_data);

	s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);

	/* LCD init */
	gpio_request(S5PC100_GPH0(6), "GPH0");
	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);

	samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);

	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:25，代码来源:mach-smdkc100.c

示例7: exynos5_odroidxu_audio_init

void __init exynos5_odroidxu_audio_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	platform_add_devices(smdk5410_audio_devices,
			ARRAY_SIZE(smdk5410_audio_devices));
}

开发者ID:Tambralinga，项目名称:odroidNetworking，代码行数:8，代码来源:board-odroidxu-audio.c

示例8: exynos5_universal5420_audio_init

void __init exynos5_universal5420_audio_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	platform_add_devices(universal5420_audio_devices,
			ARRAY_SIZE(universal5420_audio_devices));
}

开发者ID:619619，项目名称:T805-Basicrom-Kernel，代码行数:8，代码来源:board-universal5420-audio.c

示例9: smdk6450_machine_init

static void __init smdk6450_machine_init(void)
{
	s3c24xx_ts_set_platdata(&s3c_ts_platform);

	s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
	s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
	i2c_register_board_info(0, smdk6450_i2c_devs0,
			ARRAY_SIZE(smdk6450_i2c_devs0));
	i2c_register_board_info(1, smdk6450_i2c_devs1,
			ARRAY_SIZE(smdk6450_i2c_devs1));

	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
}

开发者ID:Adjustxx，项目名称:Savaged-Zen，代码行数:13，代码来源:mach-smdk6450.c

示例10: torbreck_machine_init

static void __init torbreck_machine_init(void)
{
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(0, torbreck_i2c_devs0,
			ARRAY_SIZE(torbreck_i2c_devs0));
	i2c_register_board_info(1, torbreck_i2c_devs1,
			ARRAY_SIZE(torbreck_i2c_devs1));
	i2c_register_board_info(2, torbreck_i2c_devs2,
			ARRAY_SIZE(torbreck_i2c_devs2));

	platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices));
}

开发者ID:007kumarraja，项目名称:rockchip-rk3188-mk908，代码行数:14，代码来源:mach-torbreck.c

示例11: goni_machine_init

static void __init goni_machine_init(void)
{
	/* Radio: call before I2C 1 registeration */
	goni_radio_init();

	/* I2C0 */
	s3c_i2c0_set_platdata(NULL);

	/* I2C1 */
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));

	/* TSP: call before I2C 2 registeration */
	goni_tsp_init();

	/* I2C2 */
	s3c_i2c2_set_platdata(&i2c2_data);
	i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));

	/* PMIC */
	goni_pmic_init();
	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
			ARRAY_SIZE(i2c_gpio_pmic_devs));
	/* SDHCI */
	goni_setup_sdhci();

	/* SOUND */
	goni_sound_init();
	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
			ARRAY_SIZE(i2c_gpio5_devs));

	/* FB */
	s3c_fb_set_platdata(&goni_lcd_pdata);

	/* FIMC */
	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
			 &s5p_device_fimc_md);

	goni_camera_init();

	/* SPI */
	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));

	/* KEYPAD */
	samsung_keypad_set_platdata(&keypad_data);

	clk_xusbxti.rate = 24000000;

	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}

开发者ID:5victor，项目名称:linux，代码行数:50，代码来源:mach-goni.c

示例12: smdkc210_machine_init

static void __init smdkc210_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkc210_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);

	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
}

开发者ID:007kumarraja，项目名称:rockchip-rk3188-mk908，代码行数:14，代码来源:mach-smdkc210.c

示例13: ok6410_machine_init

static void __init ok6410_machine_init(void)
{
	u32 cs1;

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&ok6410_lcd_pdata);
	s3c_hsotg_set_platdata(&ok6410_hsotg_pdata);

	samsung_keypad_set_platdata(&ok6410_keypad_data);

	s3c_nand_set_platdata(&ok6410_nand_info);
	s3c24xx_ts_set_platdata(NULL);

	/* configure nCS1 width to 16 bits */

	cs1 = __raw_readl(S3C64XX_SROM_BW) &
		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
						   S3C64XX_SROM_BW__NCS1__SHIFT;
	__raw_writel(cs1, S3C64XX_SROM_BW);

	/* set timing for nCS1 suitable for ethernet chip */

	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);

	gpio_request(S3C64XX_GPN(5), "LCD power");
	gpio_request(S3C64XX_GPF(13), "LCD power");

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	s3c_ide_set_platdata(&ok6410_ide_pdata);

	samsung_bl_set(&ok6410_bl_gpio_info, &ok6410_bl_data);

	platform_add_devices(ok6410_devices, ARRAY_SIZE(ok6410_devices));

	/* enable USB phy clock */
	s5p_usb_phy_init(&s3c_device_usb_hsotg, USB_PHY_TYPE_DEVICE);
}

开发者ID:mopplayer，项目名称:linux-ok6410，代码行数:49，代码来源:mach-ok6410.c

示例14: smdk6410_machine_init

static void __init smdk6410_machine_init(void)
{
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&smdk6410_lcd_pdata);

	gpio_request(S3C64XX_GPN(5), "LCD power");
	gpio_request(S3C64XX_GPF(13), "LCD power");
	gpio_request(S3C64XX_GPF(15), "LCD power");

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}

开发者ID:miselmipoivre，项目名称:I5700-kernel-2.6.32.9，代码行数:15，代码来源:mach-smdk6410.c

示例15: smdkc100_machine_init

static void __init smdkc100_machine_init(void)
{
	/* I2C */
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	s3c_fb_set_platdata(&smdkc100_lcd_pdata);

	/* LCD init */
	gpio_request(S5PC100_GPD(0), "GPD");
	gpio_request(S5PC100_GPH0(6), "GPH0");
	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}

开发者ID:explodingboy70，项目名称:android_kernel_samsung_aries，代码行数:16，代码来源:mach-smdkc100.c

示例16: smdk6410_machine_init

static void __init smdk6410_machine_init(void)
{
	u32 cs1;

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);

	samsung_keypad_set_platdata(&smdk6410_keypad_data);

	s3c24xx_ts_set_platdata(NULL);

	

	cs1 = __raw_readl(S3C64XX_SROM_BW) &
		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
						   S3C64XX_SROM_BW__NCS1__SHIFT;
	__raw_writel(cs1, S3C64XX_SROM_BW);

	

	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);

	gpio_request(S3C64XX_GPN(5), "LCD power");
	gpio_request(S3C64XX_GPF(13), "LCD power");

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	s3c_ide_set_platdata(&smdk6410_ide_pdata);

	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);

	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}

开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:45，代码来源:mach-smdk6410.c

示例17: smdkc110_machine_init

static void __init smdkc110_machine_init(void)
{
	s3c_pm_init();

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(0, smdkc110_i2c_devs0,
			ARRAY_SIZE(smdkc110_i2c_devs0));
	i2c_register_board_info(1, smdkc110_i2c_devs1,
			ARRAY_SIZE(smdkc110_i2c_devs1));
	i2c_register_board_info(2, smdkc110_i2c_devs2,
			ARRAY_SIZE(smdkc110_i2c_devs2));

	s3c_ide_set_platdata(&smdkc110_ide_pdata);

	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
}

开发者ID:5victor，项目名称:linux，代码行数:18，代码来源:mach-smdkc110.c

示例18: smdk6440_machine_init

static void __init smdk6440_machine_init(void)
{
	s3c24xx_ts_set_platdata(NULL);

	s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
	s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
	i2c_register_board_info(0, smdk6440_i2c_devs0,
			ARRAY_SIZE(smdk6440_i2c_devs0));
	i2c_register_board_info(1, smdk6440_i2c_devs1,
			ARRAY_SIZE(smdk6440_i2c_devs1));

	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);

	s5p6440_set_lcd_interface();
	s3c_fb_set_platdata(&smdk6440_lcd_pdata);

	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}

开发者ID:BorisTw，项目名称:BBB-kernel，代码行数:18，代码来源:mach-smdk6440.c

示例19: jet_machine_init

static void __init jet_machine_init(void)
{
	s3c_pm_init();

	s3c_init_gpio(jet_gpio_table, ARRAY_SIZE(jet_gpio_table));

	/* Register I2C devices */
	s3c_i2c0_set_platdata(&jet_misc_i2c);
	i2c_register_board_info(jet_misc_i2c.bus_num, jet_misc_i2c_devs,
					ARRAY_SIZE(jet_misc_i2c_devs));
	s3c_i2c1_set_platdata(&jet_cam_i2c);
	i2c_register_board_info(jet_cam_i2c.bus_num, jet_cam_i2c_devs,
					ARRAY_SIZE(jet_cam_i2c_devs));
	i2c_register_board_info(jet_pmic_i2c.id, jet_pmic_i2c_devs,
					ARRAY_SIZE(jet_pmic_i2c_devs));
	i2c_register_board_info(jet_audio_i2c.id, jet_audio_i2c_devs,
					ARRAY_SIZE(jet_audio_i2c_devs));
	i2c_register_board_info(jet_touch_i2c.id, jet_touch_i2c_devs,
					ARRAY_SIZE(jet_touch_i2c_devs));

	s3c_fb_set_platdata(&jet_lcd_pdata);

	s3c_sdhci0_set_platdata(&jet_hsmmc0_pdata);
	s3c_sdhci2_set_platdata(&jet_hsmmc2_pdata);

	samsung_keypad_set_platdata(&jet_keypad_pdata);

	s3c_set_platdata(&jet_onenand_pdata, sizeof(jet_onenand_pdata),
							&s3c_device_onenand);

	/* Register platform devices */
	platform_add_devices(jet_devices, ARRAY_SIZE(jet_devices));
	platform_add_devices(jet_mod_devices, ARRAY_SIZE(jet_mod_devices));

#ifdef CONFIG_ANDROID_PMEM
	/* Register PMEM devices */
	jet_add_mem_devices();
#endif

	regulator_has_full_constraints();
}

开发者ID:MadRocker，项目名称:Tom3Q-2.6.38-Jet-convert，代码行数:41，代码来源:mach-gt_s8000.c

示例20: crag6410_machine_init

static void __init crag6410_machine_init(void)
{
	/* Open drain IRQs need pullups */
	s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
	s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);

	gpio_request(S3C64XX_GPB(0), "LCD power");
	gpio_direction_output(S3C64XX_GPB(0), 0);

	gpio_request(S3C64XX_GPF(14), "LCD PWM");
	gpio_direction_output(S3C64XX_GPF(14), 0);  /* turn off */

	gpio_request(S3C64XX_GPB(1), "SD power");
	gpio_direction_output(S3C64XX_GPB(1), 0);

	gpio_request(S3C64XX_GPF(10), "nRESETSEL");
	gpio_direction_output(S3C64XX_GPF(10), 1);

	s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
	s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);

	s3c_i2c0_set_platdata(&i2c0_pdata);
	s3c_i2c1_set_platdata(&i2c1_pdata);
	s3c_fb_set_platdata(&crag6410_lcd_pdata);
	dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata);

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	samsung_keypad_set_platdata(&crag6410_keypad_data);
	s3c64xx_spi0_set_platdata(NULL, 0, 2);

	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));

	gpio_led_register_device(-1, &gpio_leds_pdata);

	regulator_has_full_constraints();

	s3c64xx_pm_init();
}

开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:41，代码来源:mach-crag6410.c

注：本文中的s3c_i2c1_set_platdata函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ s3c_mdnie_writel函数代码示例发布时间：2022-05-30

C++ s3c_i2c0_set_platdata函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19166|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8321|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ s3c_i2c1_set_platdata函数代码示例

示例1: smdkv310_machine_init

示例2: smdkv310_machine_init

示例3: omnia_II_machine_init

示例4: smdk4x12_machine_init

示例5: smdkv210_machine_init

示例6: smdkc100_machine_init

示例7: exynos5_odroidxu_audio_init

示例8: exynos5_universal5420_audio_init

示例9: smdk6450_machine_init

示例10: torbreck_machine_init

示例11: goni_machine_init

示例12: smdkc210_machine_init

示例13: ok6410_machine_init

示例14: smdk6410_machine_init

示例15: smdkc100_machine_init

示例16: smdk6410_machine_init

示例17: smdkc110_machine_init

示例18: smdk6440_machine_init

示例19: jet_machine_init

示例20: crag6410_machine_init

请发表评论

全部评论

上一篇：

下一篇：

Ubuntu14.04下安装matlab2014a

bradtraversy/iweather: Ionic 3 mobile we

CVE-2020-27732

joaomh/curso-de-matlab

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053